bizhub PRO 1050/1050e/1050P/1050eP Additional Information
The following options are newly provided to bizhub PRO 1050/1050e/1050P/1050eP.
Large Capacity Stacker LS-505 Folding Unit FD-503 Saddle Stitcher SD-506 Perfect Binder PB-502
Please refer to this guide for the operation and safety information on the above options, and keep it inside the users guide of copier so that it is readily available for reference.

Contents

1050/1050e Installation Space...1 1050P/1050eP Installation Space..7 Machine Configuration...13
Standard/Optional Equipment... 13 Large Capacity Stacker LS-505... 16 Folding Unit FD-503... 18 Saddle Stitcher SD-506... 20 Perfect Binder PB-502.. 22
Removing Finished Sets from Large Capacity Stacker LS-505.25
To remove finished sets... 25 To secure paper on the carriage.. 27
Using Folding Unit FD-503..30
Punching File Holes in Copies (1050/1050e only).. 31 Folding Copies (1050/1050e only).. 33
Using Post Inserter on Folding Unit FD-503..35
To prevent small cover sheet from skewing.. 36
Using Folder/Finisher Functions Manually..37 Using Saddle Stitcher SD-506..40
Making Folded Booklet (1050/1050e only)... 40 Folding Copied Set (1050/1050e only).. 43
Using Perfect Binder PB-502...46
Making Perfect-Bound Book (1050/1050e only).. 51
Paper and Original Information..63
Paper Weight... 63 Paper Tray/ Exit Tray Capacity... 65 Paper Size... 68

Add Staples...71

Inserting a New Staple Cartridge into Saddle Stitcher SD-506. 71
Empty Punch Trash/Trim Dust...74
Empty Trash Basket of Folding Unit FD-503.. 74 Empty Dust Box of Saddle Stitcher SD-506.. 76 Empty Dust Box of Perfect Binder PB-502... 78

Specifications...80

Large Capacity Stacker LS-505... 80 Folding Unit FD-503... 81 Saddle Stitcher SD-506... 82 Perfect Binder PB-502.. 83
1050/1050e Installation Space
Allow sufficient space for facilitating copy operation, replenishing consumables, changing parts, and periodic inspection. The whole machine may weigh approx. 2,417.1 lb (1,095 kg) at maximum, depending on the combination of options. Be sure to choose a level and solid floor for the installation place.
Unit: inches (mm) 25.6 (650) 8.4 (213) 12.0(306) 15.3 (389) 62.2 (1580) 40.2 (1020)

3.9 (100)

30.9 (785)
35.2 (895) 97.9 (2487) 105.7 (2687)

31.8 (807) 3.9 (100)

37.4 (950)
26.6 (675) 30.5 75.8 (775) (1925) 7.9(200)
Main body + DF-603 + PF-701 + LS-505
1050/1050e Installation Space (continued)
Unit: inches (mm) 25.6 (650)

12.0(306)

8.4 (213)
15.3 (389) 62.2 (1580) 40.2 (1020)

30.9 (785) 128.8 (3272)

35.2 (895) 136.6 (3472)

31.8 (807)

Main body + DF-603 + PF-701 + LS-505 + LS-502

Unit: inches (mm)

25.6 (650)
15.3 8.4 (389) (213) 62.2 (1580) 40.2 (1020)

48.5 (1231)

9.3 21.4 (237) (544) 3.4(85)
35.2 15.7 (895) (400) 116.8 (2968) 124.6 (3168)
Main body + DF-603 + PF-701 + FD-503 + FS-503

9.3 (237) 3.4(85)

21.4 (544)

3.9(100)

30.9 (785) 162.9 (4138)

35.2 (895) 170.7 (4338)

Main body + DF-603 + PF-701 + LS-505 (x2) + FS-503
15.3 8.4 (213) (389) 62.2 (1580) 40.2 (1020)

46.1(1170)

15.7 (400)

35.2 (895)

162.9(4138) 170.7(4338)
Main body + DF-603 + PF-701 + FD-503 + SD-506 + FS-503
8.4 15.3 (213) (389) 62.2 (1580)

40.2 (1020)

46.1 (1170)

15.7 (400) 128.8 (3272)

Main body + DF-603 + PF-701 + FD-503 + SD-506
35.2 (895) 113.1 (2872) 120.9 (3072)
Main body + DF-603 + PF-701 + SD-506

62.2 (1580) 40.2 (1020)

30.2 (766) 37.4 (950) 75.8 (1925)
26.6 (675) 30.5 (775) 7.9(200)
Main body + DF-603 + PF-701 + SD-506 (Side view)
48.5 (1231) 48.1 (1223) 22.2 (563) 29.1 (740) 15.7 (400) 134.1 (3405) 35.2 (895) 145.9 (3705) 31.8 (807)

7.9 (200)

Main body + DF-603 + PF-701 + FD-503 + PB-502

48.1 (1223)

22.2 (563)

29.1 (740)

46.1 (1170) 164.4 (4175)

35.2 (895) 176.2 (4475)

Main body + DF-603 + PF-701 + SD-506 + PB-502
25.6 (650) 48.5 (1231) 48.1 (1223)

46.1 (1170) 180.1 (4575)

15.7 (400) 191.9 (4875)
Main body + DF-603 + PF-701 + FD-503 + SD-506 + PB-502
Unit: inches (mm) 25.6 (650) 8.4 (213) 48.1 (1223) 12.0(306) 15.3 (389) 62.2 (1580) 40.2 (1020)

149.2 (3790)

35.2 (895) 161.0 (4090)
Main body + DF-603 + PF-701 + LS-501/LS-505 + PB-502
15.3 8.4 (213) (389) 62.2 (1580)

29.1 (740) 118.3 (3005)

35.2 (895) 130.1 (3305)

Perfect Binder PB-502 + Saddle Stitcher SD-506 + Folding Unit FD-503
Main Body 1050/1050e + Paper Feeder Unit PF-701 + Reverse Automatic Document Feeder DF-603

Saddle Stitcher SD-506

Finisher FS-503 + Saddle Stitcher SD-506 Main Body 1050P/1050eP + Paper Feeder Unit PF-701
Perfect Binder PB-502 + Saddle Stitcher SD-506

Perfect Binder PB-502

Large Capacity Stacker LS-505
Finisher FS-503 + Large Capacity Stacker LS-505
Saddle Stitcher SD-506 + Large Capacity Stacker LS-505
Finisher FS-503 + Saddle Stitcher SD-506 + Large Capacity Stacker LS-505
Perfect Binder PB-502 + Large Capacity Stacker LS-505
Large Capacity Stacker LS-502 + Large Capacity Stacker LS-505
Finisher FS-503 + Large Capacity Stacker LS-505 (x2)
No. Name Secondary (Sub) tray Top cover handle (left) Top cover handle (right) Paper removal indicator Paper removal button Large capacity stacker door Outlet cover lever Secondary (Sub) tray conveyance cover handle Stacker conveyance knob Secondary (Sub) tray conveyance knob Outlet knob Inlet lever Stacker Outlet lever Carriage Paper holder Paper stopper Description Holds sets output in Non-sort mode. Opens to remove mishandled paper. Opens to remove mishandled paper. Lights while the stacker goes down in order to allow takeout of printed sheets. Pressed to take out printed sheets from the stacker. Opens to take out printed sheets from the stacker. Opens to remove mishandled paper. Opens to remove mishandled paper.
Can be turned clockwise to feed mishandled paper to the stacker. Can be turned clockwise to feed mishandled paper to the secondary (sub) tray. Can be turned clockwise to feed mishandled paper to the outlet. Opens downward to remove mishandled paper. Holds sets output in Non-sort mode or Collate mode (offset). Opens downward to remove mishandled paper. Carries paper together with the stacker. Mounts paper stopper for holding output paper. Holds output paper.

External View

No. 9 Name Primary (Main) tray Fold mode tray Coordinating stopper Lower tray Lower tray guide plates Upper tray Upper tray guide plates Upper cover handle Folding unit door Description Holds sets output in Fold mode or Punch mode. Holds sets output in Tri-Fold-in, Tri-Fold-out, Double Parallel, or Gate Fold mode. Holds double-parallel- or gate-folded sets in order to prevent them from collapsing. Holds cover sheets. Hold cover sheets to fix the position. Holds cover sheets. Hold cover sheets to fix the position. Opens to allow removal of mishandled paper. Opens to allow removal of mishandled paper or waste paper.

Internal View

No. Name Inlet lever Post inserter conveyance lever (behind the inlet lever) Waste basket Upper/Lower conveyance lever Folding unit handle Conveyance knob/1 Outlet lever Upper/Lower right side lever Upper/Middle/Lower knob Left side lever (right/left) Upper lever Conveyance knob/2 Description Opens leftward to remove mishandled paper. Opens leftward to remove mishandled paper.
Holds waste paper punched out. Opens rightward to remove mishandled paper. Withdraws the unit to allow removal of mishandled paper. Can be turned counterclockwise to ease removal of mishandled paper. Opens rightward to remove mishandled paper. Opens upward to remove mishandled paper. Can be turned clockwise to ease removal of mishandled paper. Opens leftward to remove mishandled paper. Opens upward to remove mishandled paper. Can be turned clockwise to ease removal of mishandled cover paper.
No. Name Secondary (Sub) tray of Saddle stitcher Multi tri-folding mode outlet cover handle Multi tri-folding mode tray Secondary (Sub) tray Right side door of Saddle stitcher Saddle stitcher tray Waste basket Left side door of Saddle stitcher Description Holds non-sorted sets output from Saddle stitcher. Opens upward to remove mishandled paper. Holds sets output in multi tri-folding mode. Holds non-sorted sets output from the machine on the right side of the Saddle stitcher. Opens to remove mishandled paper. Withdrawn when using Fold & Staple and multi half folding mode. Withdrawn to remove waste paper. Opens for staple supply or to remove mishandled paper.
No. Name Upper cover lever of Folding unit Secondary (Sub) tray conveyance lever (middle) Folding unit drawer handle Secondary (Sub) tray conveyance lever (right) Inlet lever Feeding knob Folding unit conveyance lever Folding unit conveyance cover handle Folding unit front cover lever Stapling unit Stapling unit knob Outlet lever Outlet conveyance lever Description Opens the upper cover to remove paper misfed inside the Folding unit. Opens downward to remove mishandled paper.
Opens the drawer to remove paper misfed inside the Folding unit. Opens upward to remove mishandled paper. Opens leftward to remove mishandled paper. Can be turned clockwise to feed mishandled paper to the Folding unit. Opens rightward to remove mishandled paper. Opens the cover to remove mishandled paper. Opens upward to remove mishandled paper. Staples folded sets. Can be turned clockwise to feed mishandled paper. Opens leftward to remove mishandled paper. Opens downward to remove mishandled paper.

No. 7 Name Paste hopper cover Secondary (Sub) tray Front door of Perfect Binder PB-502 Cover feeding tray Perfect binder tray Perfect binder tray cover Feeding button Description Opens for supply of paste pellet of for removal of paste pellets stuck inside the paste hopper. Holds sets output without being processed by the perfect binder. Opens to remove mishandled paper and waste trimmings. Holds cover paper. Holds sets output in Perfect Binding mode. Opens to take out the bound sets from the tray. Pressed to feed the bound set leftward.
No. Name Body set releasing knob in clamp unit Clamp unit conveyance knob Pellet stacking correction lever Clamp unit lever Secondary (Sub) tray conveyance knob Body set conveyance lever (upper) Body set conveyance lever (lower) Cover conveyance lever (left) Cover conveyance lever (right) Cover conveyance lever (lower) Cover conveyance knob Trim dust box Description Can be turned clockwise to take out the body set fixed in the clamp unit. Can be turned clockwise to feed the body set for removal of mishandled paper. Pushed downward for removal of paste pellets stuck inside the paste hopper. Can be turned clockwise to withdraw the clamp unit for removal of body set mishandled in the clamp unit. Can be turned counterclockwise to feed the mishandled paper into the secondary (sub) tray. Opens downward to remove mishandled body set. Opens upward to remove mishandled body set. Opens upward to remove mishandled cover sheet. Opens leftward to remove mishandled cover sheet. Opens leftward with the trim dust box drawn out to remove mishandled cover sheet. Can be turned clockwise to remove mishandled cover sheet. Withdrawn to remove waste paper.
No. Name Binding unit descending knob Jam position display Cover control releasing knob Cover fixing plate releasing knob (right/left) Binding unit releasing knob Description Can be turned downward to let the binding unit down for removal of mishandled paper. Indicates the position of mishandled paper by LED lamps. Can be turned clockwise to remove cover sheet from the binding unit. Can be turned clockwise for the left knob and counterclockwise for the right knob to release the cover fixing plate for removal of mishandled paper. Can be turned downward to remove cover sheet from the binding unit in the top position.
Removing Finished Sets from Large Capacity Stacker LS-505
The Large Capacity Stacker LS-505 can hold 5,000 output sheets (3,000 sheets for coated paper of Max. 13.0" 19.0" (331 mm 483 mm) to Min. 8.3" 15.0" (210 mm 380 mm) / 2,000 sheets for B5 and A5) at maximum. Follow the procedure below to take out paper from the stacker.
The paper stopper is provided to secure the paper in position when moving the carriage.

To remove finished sets

Press the Paper removal button.
The stacker unit will move down to the carriage.

If you touch Cancel, it returns to the previous setting. If you touch Function Off, folding output will be turned off but the selected folding settings will be kept in memory.
Using Post Inserter on Folding Unit FD-503
This function uses the post inserter on Folding Unit FD-503 to attach a cover. Using Sheet Insertion function, cover sheets loaded in the top/bottom tray of the post inserter can be attached as a front cover, back cover, or insertion sheet to output copies, in order to create a stapled book with a cover and chapter title pages. You can also use the Booklets Cover with Blank Sheet mode and Sheet Insertions Cover mode in combination to make a double-covered booklet. Use the Perfect Binding mode to attach a cover loaded in the top/bottom tray of the post inserter, in order to create a perfect-bound book.
Covers and insertion sheets
Copied set with covers attached in staple mode
Copied set with covers and insertion sheets attached

Cover sheet

Body set with cover attached in perfect binding mode
Using Post Inserter on Folding Unit FD-503 (continued)
Place paper on the upper and lower trays of the post inserter.

Upper tray

Lower tray
Do not load more than 500 sheets (20 lb) for each of the upper and lower trays. Do not load above the load limit line on the guide plate.
Use the sheet insertion or booklet function to place a cover sheet.
Be careful not to exceed the finisher tray capacity when selecting the print quantity, otherwise unexpected trouble may be caused.
To prevent small cover sheet from skewing
The small cover sheet may be skew, when loading it in the upper/lower tray of the post inserter. Three paper rollers are attached to the upper/lower tray respectively. To lock the roller both sides, prevent paper from skewing. Push the both roller lock levers to inside to lock them.
Be sure to lock both sides, when locking the paper rollers. Do not lock the paper rollers normally.
Using Folder/Finisher Functions Manually
The following finishing functions are manually available with a set of paper loaded in the upper tray of the post inserter of Folding Unit FD-503. Folding Unit FD-503 only: Z-Fold, Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate Fold, Half Fold, 2 Holes Punch, 3 Holes Punch Folding Unit FD-503 + Finisher FS-503: 1 Stapling/ 2 Stapling in addition to the functions for folding unit only Folding Unit FD-503 + Saddle Stitcher SD-506: Fold & Staple in addition to the functions for folding unit only Folding Unit FD-503 + Finisher FS-503 + Saddle Stitcher SD-506: All functions are available.

Specifications for Using Folder/Finisher Functions Manually
When using folder/finisher/saddle stitcher functions manually, paper should be placed only in the upper tray of the post inserter. Multi-feed detection is a feature that automatically stops the machine if more than one sheet is fed at a time. The post inserter is designed to detect multifeeding. Coated paper and other kinds of smooth surface paper may activate this function even if a single sheet is fed, stopping the machine. Should this case occur frequently, press the Multi-Feed Detection button and light up the lower lamp, in order to turn the function OFF.
Multi-Feed Detection 1 Stapling Function ON

2 Holes Punch

Letter Fold-in Folding
Multi-Feed Detection 2 Stapling Function OFF

3 Holes Punch

Double Parallel
Fold & Staple Start/Stop button Multi-Feed Detection button Punch selection Staple Selection button button Fold Selection button
Using Folder/Finisher Functions Manually (continued)
Place paper in the upper tray of the post inserter.
1 or 2 stapling: Place paper face up. Punching: Place paper face up. Folding: Place the surface to be inside the fold face up. Fold&Staple: Place the surface to be inside the fold face up.
Align the guide plate with the paper.

Select a mode.

Punch selection button Staple Selection button Fold Selection button
When selecting 1 or 2 stapling / fold&staple, press the Staple selection button to turn on the desired mode lamp. When selecting 2- or 3-hole punching, press the Punch selection button to turn on the desired mode lamp. When selecting folding (from 6 styles), press the Fold selection button to turn on the desired mode lamp.
Punching and stapling can be combined. When combining them, turn on the lamps for both functions.
Press the Start/Stop button.

Start/Stop button

If multi-feeding is detected and the machine stops even if single sheet is fed, press the Multi-Feed Detection button to turn on the lamp below.

To interrupt the operation, press the Start/Stop button again.

ON OFF

Multi-Feed Detection button
Using Fold&Staple mode, the finished sets will be delivered to the saddle stitcher tray of Saddle stitcher SD-506. Be sure to withdraw the saddle stitcher tray, and open the tray stand when fully withdrawn. See p. 42 for details. Copies will be delivered to the primary (main) tray of Finisher FS-503. Be careful not to exceed the finisher tray capacity when selecting the print quantity, otherwise unexpected trouble may be caused.
To fold or fold&staple booklet-styled prints manually, arrange the printed sheets as shown below before placing them into the post inserter.
Using Saddle Stitcher SD-506
Making Folded Booklet (1050/1050e only)
Machine with the Saddle Stitcher SD-506 installed provides Fold & Staple mode in combination with Booklet feature to make two-sided signature booklet, folded and stapled at two positions (saddle stitched) in the center. Use Trimming mode to trim the edge that opens the booklet, if desired.

Fold & Staple

Fold & Staple and Trimming
Using Saddle Stitcher SD-506 (continued)
Touch Fold&Staple, then select to use Trimming or not. The Fold&Staple Screen will be displayed.
Touch Trimming or Non Trimming to select it.
Touch OK. The Output Application Screen will be restored.
If you touch Cancel, the previous setting will be restored. Touching Function Off will deselect the Fold&Staple (and Trimming) mode, however, the specified setting will be kept in memory.
Touch OK on the Output Application Screen. The output icon of the selected output mode will be displayed on the Copy Screen. Booklet function in the Application setting has been selected automatically.
Withdraw the Saddle stitcher tray. Open the tray stand when fully withdrawn.
The folded and stapled (and trimmed) sets will be delivered into the Saddle stitcher tray. If the tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications.
Never return the Saddle stitcher tray to its original position with the tray stand opened.
Folding Copied Set (1050/1050e only)
Machine with the Saddle Stitcher SD-506 installed provides Multi Center mode to double-fold up to 5 sheets of copied set, or Multi Letter mode to fold it inside in three. Using Multi Letter, the print side can be specified on the screen.

Paper weight is to be specified for each paper tray in the paper setting.
The paper weight specified for each tray can be registered and deleted in the User Setting. For details, see pages 1-7 and 1-11 of POD Administrators reference. Paper weight for cover sheets to be used in perfect binding can be specified in the Output Application setting. See p. 52 for details.
Paper and Original Information (continued)
Equipment Folding Unit FD-503 Fold mode tray Weight Tri-Fold-in, Tri-Fold-out: 13 to 34 lb Bond Double Parallel, Gate Fold: 13 to 24 lb Bond 13 to 64 lb Bond Punch: 13 to 55 lb Bond Z-Fold, Tri-Fold-in, Tri-Fold-out, Half Fold: 13 to 34 lb Bond Double Parallel, Gate Fold: 13 to 24 lb Bond 13 to 80 lb Bond 13 to 64 lb Bond 13 to 80 lb Bond Fold & Staple, Trimming: 13 to 64 lb Bond Multi Half Fold of 5 sheets: 13 to 21 lb Bond Multi Half Fold of 3 sheets: 22 to 34 lb Bond Multi Half Fold of 2 sheets: 35 to 64 lb Bond Multi Tri-Fold of 5 sheets: 13 to 21 lb Bond Multi Tri-Fold of 3 sheets: 22 to 24 lb Bond 13 to 80 lb Bond Body: 17 to 24 lb Bond Cover: 22 to 42 lb Bond

Primary (main) tray

Large Capacity Stacker LS-505 Saddle Stitcher SD-506
Secondary (sub) tray Stacker Secondary (sub) tray Saddle stitcher tray
Multi trifolding mode tray Perfect Binder PB-502 Secondary (sub) tray Perfect binder tray
Paper Tray/ Exit Tray Capacity
Paper Trays Capacity Cover feeding tray (Perfect 1,000 sheets (22 lb Bond) Binder PB-502) 500 sheets (42 lb Bond) Post Inser ter Upper/Lower 500 sheets (21 lb Bond) tray (attached to Folding Unit FD-503)
Equipment Folding Unit FD-503 Fold mode tray Primary (main) tray (normal/ punch) 30 sets (21 lb Bond)

Capacity

500 sheets (21 lb Bond) (5.5" 8.5" w/v, A5 w/v, B6 w) 2,500 sheets (21 lb Bond) (8.5" 11" w/v, A4 w/ v, B5 w/v, 16K v) 1,500 sheets (21 lb Bond) (12" 18" w, 11" 17" w, 8.5" 14" w, A3 w, B4 w, Foolscap, 8K w) 30 sheets
Primary (main) tray (fold) Large Capacity Stacker LS-505 Stacker
Max. 5,000 sheets (21 lb Bond) 12" 18" w, 11" 17" w, 8.5" 14" w, 8.5" 11" w/v, A3 w, B4 w, A4 w/v, Foolscap, 8K w, 16K w/v Max. 3,000 sheets (21 lb Bond) Coated paper: Max. 13.03" 19.02" (324 mm 460 mm) to Min. 8.27" 14.96" (210 mm 380 mm) Max. 2,000 sheets (21 lb Bond) B5 v, A5 v Max. 200 sheets (21 lb Bond) 13 to 21 lb Bond: 50 sheets or 49 sheets + 1 (53 lb Bond) 22 to 24 lb Bond: 30 sheets or 29 sheets + 1 (53 lb Bond) 24 to 34 lb Bond: 20 sheets or 19 sheets + 1 (53 lb Bond) 35 to 42 lb Bond: 15 sheets or 14 sheets + 1 (53 lb Bond) 42 to 55 lb Bond: 10 sheets 55 to 64 lb Bond: 5 sheets

Secondary (sub) tray Saddle Stitcher SD-506 Fold & Staple High quality paper (pagination per set)
Saddle Stitcher SD-506 Fold & Staple Coated paper (pagination per set) 13 to 21 lb Bond: 30 sheets or 29 sheets + 1 (53 lb Bond) 22 to 24 lb Bond: 15 sheets or 14 sheets + 1 (53 lb Bond) 24 to 34 lb Bond: 10 sheets or 9 sheets + 1 (53 lb Bond) 35 to 42 lb Bond: 5 sheets or 4 sheets + 1 (53 lb Bond) 2 to 10-sheet-folded set: 50 sets 11 to 20-sheet-folded set: 30 sets 21 to 40-sheet-folded set: 20 sets 41 to 50-sheet-folded set: 15 sets (with the saddle stitcher tray fully withdrawn) Max. trimmed sheets: 50 sheets (21 lb Bond) 2, or 49 sheets (21 lb Bond) + 1 (53 lb Bond) 2 Max. folded sheets: 5 sheets (13 to 21 lb Bond) Tray capacity: 30 sets (Saddle stitcher tray) Max. folded sheets: 5 sheets (13 to 21 lb Bond) Tray capacity: 1-sheet-folded set: 40 sets 2 to 3-sheet-folded set: 30 sets 4 to 5-sheet-folded set: 20 sets (Multi tri-fold tray) 1 set of maximum thickness (approx. 1.18"/30 mm) columns* (approx. 6,600 sheets, 21 lb Bond) *Automatically shifts to the second column when the first column is detected as full load. The Full load detection function on Perfect binder counts one column to be full when the following amount is reached in order to prevent the piled sets from collapsing. 10 to 30-sheet-bound set: 50 sets 31 to 150-sheet-bound set: 35 sets or until detected as full load 151 to 300-sheet-bound set: until detected as full load Max. 200 sheets (with Full load detection function activated)
Fold & Staple Saddle stitcher tray capacity Trimming Multi Half Fold Multi Tri Fold

Perfect binder tray

Secondary (sub) tray
Saddle stitcher tray information: If the Saddle stitcher tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications. Height of the folded and stapled booklet The following table shows the standard height of folded and stapled booklet according to the number of sheets and paper size.
Paper size Number of sheets (1 set)
1218 w, 1117 w, A3 (401 mm or more) 35 mm 45 mm 50 mm 60 mm
8.514 w, B4 w, 8K w (301 ~ 400 mm) 40 mm 50 mm 55 mm 65 mm
8.511 w, A4 w , 16K w (261 ~ 81 mm) 45 mm Not specified Not specified Not specified
B5 w (260 mm or less) Not specified Not specified Not specified Not specified

2~5 6~ ~ ~ 50

Some types of 13 to 21 lb Bond high quality paper may be limited to 30 sheets or 29 sheets + 1 (53 lb Bond) in pagination. Contact your ser vice representative, if details desired.

Follow the procedure below to empty the trash basket.
Open the Finisher door, then withdraw the trash basket.
Empty Punch Trash/Trim Dust (continued)

Empty the trash basket.

Return the trash basket to its original position, then close the Finisher door securely.
Empty Dust Box of Saddle Stitcher SD-506
When the dust box of the Saddle Stitcher SD-506 becomes full, the Trim Dust indicator lights in red in the option status area of the Machine Status Screen. If printing job is in progress, a message will be displayed on the Copy Screen.
Follow the procedure below to empty the dust box.

Withdraw the dust box.

The dust box cannot be withdrawn while machine operation is in progress. Be sure to confirm that the machine has stopped its operation before withdrawing the dust box.
Open the top cover of the dust box.
Take waste paper out of the dust box.
Close the top cover of the dust box, then return it to its original position.
Be sure to return the dust box to its original position, otherwise the trimming function cannot be performed.
Empty Dust Box of Perfect Binder PB-502
When the dust box of the Perfect Binder PB-502 becomes full, the Trim Dust indicator lights in red in the option status area of the Machine Status Screen. If printing job is in progress, a message will be displayed on the Copy Screen.
Open the front door of the perfect binder.
Do not open the front door while machine operation is in progress, otherwise a paper jam may be caused. Be sure to confirm that the machine has stopped its operation before opening the front door.
Return the dust box to its original position, then close the front door of the perfect binder.

Specifications

Name: Function: Paper types: Paper sizes: LS-505 Stack printed paper Stacker: 13 to 64 lb Bond Secondary (sub) tray: 13 to 81 lb Bond Stacker: 12" 18 w, 11" 17" w, 8.5" 14" w, 8.5" 11" w/v, A3 w, B4 w, A4 w/v, B5 v, A5 v, Foolscap, 8K w, 16K v, Wide Size and custom sizes (max. 13.03" 19.21" (331 mm 488 mm) to min. 8.27" 5.83" (210 mm 148 mm)) Secondary (sub) tray: 12" 18 w, 11" 17" w, 8.5" 14" w, 8.5" 11" w/v, 5.5" 8.5" w/v, A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v, B6 w, A6 w, Foolscap, 8K w, 16K w/v, Wide Size and custom sizes (max. 13.03" 19.21" (331 mm 488 mm) to min. 3.94" 5.83" (100 mm 148 mm)) Tabbed paper is output to the secondary (sub) tray. See p. 69 for details. Stacker: 5,000 sheets 2,000 sheets for B5 w and A5 w 3,000 sheets for Coated paper and max. 13.03" 19.21" (331 mm 488 mm) to min. 8.27" 14.96" (210 mm 380 mm) paper Secondary (sub) tray: 200 sheets Supplied from internal battery 30.9 (W) 28.5 (D) 40.2 (H) inches Approx. 243 lb

Capacity:

Power source: Dimensions: Weight:

Specifications (continued)
Name: Function: Number of punch holes: Hole diameter: Hole pitch: Fold type: Paper types: FD-503 Distributes output 2 or 3 6.5 0.5 mm 2 holes: 2.76" (70 mm) 3 holes: 4.25" (108 mm) Z-Fold, Tri-Fold-in, Tri-Fold-out, Half-Fold, Double Parallel, Gate Fold Primary (main) tray: 13 to 64 lb Bond Fold mode tray: 13 to 34 lb Bond (See p. 64 for details.) See p. 68 for details. Primary (main) tray: 2,500 sheets max. Fold mode tray: 30 sets max. (See p. 65 for details.) Supplied from finisher 15.7 (W) 28.5 (D) 48.5 (H) inches Width including primary (main) tray: 26.3 inches/ 30.9 inches (pulled out) Approx. 287 lb
Paper sizes: Output tray capacity:
Power source: Dimensions:

Weight:

Name: Function: Binding pitch: Binding capacity: Paper types: Paper Sizes: SD-506 Multi half fold, Fold & staple, Trimming, Multi tri-fold 90 to 165 mm Max. 50 sheets Fold & staple, Trimming: 13 to 64 lb Bond (See p. 64 for details.) Fold & staple, Trimming: 12" 18" w, 11" 17" w, 8.5" 14" w, 8.5" 11" w, A3 w, B4 w, A4 w, B5 w, Foolscap, 8K w, 16K w (See p. 69 for details.) See p. 65 for details. 270VA 46.1 (W) 30.5 (56.7" when tray is pulled out) (D) 40.2 (H) inches Supplied from internal battery Approx. 580 lb
Paper tray capacity: Maximum power consumption: Dimensions: Power source: Weight:
Name: Function: Number of sheet (1 set): PB-502 Perfect binder tray: Hot-melt type binding, Trimming Secondary (sub) tray: straight delivery 10 to 300 sheets, or within 30 mm thick 10 to 150 sheets, or within 15 mm thick for colored, fine and matted paper 10 to 110 sheets for 22 to 28 lb Bond paper For details of Z-folded insertions, see p. 49. Perfect binder tray: Body 8.5" 11" v, 5.5" 8.5" w/v, A4 v, B5 v, A5 w/v, 16K w/v Cover 5.47" 11.69" min. to 12.09" 18.58" max. (139 mm 279 mm min. to 307 mm 472 mm max.) (custom size) For details of available sizes in Perfect binding mode, see p. 49. Secondary (sub) tray: min. 13.0" 19.2" (100 mm 148 mm) to max. 13.03" 19.21" (331 mm 488 mm), Standard tab paper Perfect binder tray: 17 to 24 lb Bond (body) 22 to 42 lb Bond (cover) Secondary (sub) tray: 13 to 80 lb Bond Perfect binder tray: Plain, Fine (body) Fine, Coated (cover) Secondary (sub) tray: Plain, Fine, Coated, Special, Labels, Tab paper Cover feeding Tray: 1,000 sheets (22 lb Bond) 5,00 sheets (43 lb Bond) Perfect binder tray: 30 mm thick (300-sheet-bound) booklet 11 sets 2 (approx. 6,600 sheets) Secondary (sub) tray: 200 sheets (Full-load detection- function is available.) Approx. 20 minutes 51.3 (W) 30.5 (D) 48.2 (H) inches Approx. 463 lb Supplied from internal battery 1,000 W max.

Paper Sizes:

Paper weight:

Paper types:

Stack capacity:
Warm-up time: Dimensions: Weight: Power source: Power consumption:

56UA962200

Click [Next]. The window to select the printer port will appear.
Select the checkbox of the port connecting the printer. Select the port to which the printing system is directly connected.
Click [Next]. If you want to print directly to the printing system via the network, select the LPR port. For details, refer to "Installing to Windows NT4.0 (PCL/PPD)" on Page 5-7. The window to select the printer manufacturer and model appears.
Click [Browse]. The [Locate File] window appears.
Set the bizhub PRO 1050 Series CD-ROM or PS-502 CD-ROM in the CD-ROM drive. Change [Look in] to CD-ROM drive. Select the following file; When you install PCL driver: [KMRG601.inf] file in the \Driver\Drivers\bizhubPRO1050\EN\WinNT folder of the bizhub PRO 1050 Series CD-ROM
Installation (Local printing) When you install PPD driver: [Oemsetup.inf] file in the \EN\Driver\AdobePS\WinNT folder of the PS-502 CD-ROM
Click [Open] The [Install From Disk] window appears again. Click [OK]. The [Add Printer Wizard] window to select the manufacturer and model of the printer appears.
Click [Next]. The [Add Printer Wizard] window appears. In the [Printer name] text box, check the printer name. If you want to change the printer name, enter the new printer name in the [Printer name] text box.
Select whether to use this printer as the default printer or not by selecting [Yes] or [No]. If you install a printer to the computer for the first time, [Default printer] setting will not appear, and the first printer installed will be the default printer.
Click [Next]. The [Add Printer Wizard] window to select whether to share the printer appears.
Select whether to share the printer or not. Select [Shared] or [Not shared] checkbox. You can select the Network Client OS using the shared printer from the list displayed at the lower part of the window. When you select [Shared], you can input the shared name in the textbox.
Click [Next]. The [Add Printer Wizard] window to perform the test print appears. Select Whether to perform the test print or not by selecting [Yes (recommended)] or [No]. Printing the test page is also possible after the installation of the printer driver.
Click [Finish]. Necessary files will be copied from the bizhub PRO 1050 Series CD-ROM or PS-502 CD-ROM to complete the installation. If you have selected [Yes (recommended)] at step 23, performing of the test print starts.

Select a disk to be installed and then click [Continue]. Easy Install window appears.
Click [Install]. When using the Mac OS X (v10.3x/v10.4x), enter the name and password of the administrator. When reinstallation is carried out, the indication [Install] may be changed to [Upgrade].
Installation (Network printing) Printer driver will be installed on PC. When the installation completes, a message appears.
Click [Close]. The printer driver is installed now.
You must delete the current printer driver at first if you want to update/ reinstall the printer driver. Refer to "Deleting the Printer Driver (Mac OS X)(PPD)" on Page 6-9 for the method of deleting the printer driver.
Installation (Network printing) Selecting the Printer (Mac OS X v10.2x) [Print Center] enables you to select a printer you want to use.
From installed [HDD]-[Applications]-[Utilities], double-click on [Print Center].
Click [Add]. If the applicable printer is set, the illustration of 2 is not displayed.
Select the corresponding printer name.
Click [Printer Model] and select [KONICA MINOLTA].
Select the [KONICA MINOLTA 1050 PS (P)] and then click [Add]. If you choose [IP Printing] as a connection method of the printer, you need to input the IP address of the printer.
The selected printer is registered to [Printer List].
Click the printer name and from menu - [Printers], select [Show Info]. [Printer Info] window will be displayed.
Select [Installable Options]. Setup the options that are equipped to copier.
Click [Apply Changes]. Close [Print Info] window.
Installation (Network printing) Selecting the Printer (Mac OS X v10.3x/v10.4x) On [Printer Setup Utility], set the printer you want to use.
Select [Utilities] of the [Go] menu.
Select [Printer Setup Utility].
Select [Add]. Select [AppleTalk] (v10.4x is shown as [Default Browser].) as a connection method for a printer. If you have selected [IP Print] as a connection method for a printer, you need to enter the IP address of the print controller. Printers available for connection will be listed.
Max OS X v10.3 screens are indicated here for description.
Select the corresponding printer, and select [KONICA MINOLTA] from [Printer Model] (v10.4x is shown as [Printer Using].). Select [KONICA MINOLTA 1050 PS (P)] from the list, and click [Add].
Macintosh Macintosh has no standard test print function. Double-click [ReadMe.txt] in the PS-502 CD-ROM. Then, select [Print.] from [File] menu and make sure it is printed properly.

Restart the computer. If the printer has been set as the default printer, the message saying the default printer is deleted appears after the deletion. The printer driver is uninstalled.
When updating the printer driver, go to "Installing to Windows 98/Me (PCL/PPD)" on Page 4-3.
Uninstallation of the printer driver Deleting the Printer Driver (Windows NT4.0)(PCL/PPD)
To delete the Windows NT4.0 compatible printer driver, perform the following steps.
Turn on the computer and start Windows NT 4.0. Click [Start] of the task bar. Then, select [Settings] from the Start menu to click [Printers] from the sub-menu. Exit from all active Windows applications, if required. The [Printers] window appears.
Right-click the icon for the printer you want to delete. Then, select [Delete]. The confirmation message appears.
Click [Yes]. The printer driver is uninstalled. After completion of uninstall, close the [Printers] window.
Restart the computer. To avoid the system failure, make sure to restart the computer after deleting the printer driver.
When updating the printer driver, go to "Installing to Windows NT4.0 (PCL/PPD)" on Page 4-7.
Uninstallation of the printer driver Deleting the Printer Driver (Windows 2000)(PCL/PPD)
To delete the Windows 2000-compatible printer driver, perform the following steps.
Turn on the computer and start Windows 2000. Click [Start] of the task bar. Then, select [Settings] from the Start menu to click [Printers] from the sub-menu. Exit from all active Windows applications, if required. The [Printers] window appears.
Click [Yes]. If the printer has been set as the default printer, the message saying the default printer is deleted appears after the deletion. The printer is uninstalled.
Select [Server Properties] from the [File] menu of the [Printers] window. The [Print Server Properties] window appears. Open [Drivers] tab of the [Print Server Properties] window. Select the printer driver you want to delete from the [Installed printer drivers:]. Then click [Remove]. The confirmation message appears.
Click [Yes]. The printer driver is deleted (uninstalled). Restart the computer. To avoid the system failure, make sure to restart the computer after deleting the printer driver.
When updating the printer driver, go to "Installing to Windows 2000 (PCL/PPD)" on Page 4-12.
Uninstallation of the printer driver Deleting the Printer Driver (Windows XP/Server 2003)(PCL/PPD)
To delete the Windows XP/Server 2003-compatible printer driver, perform the following steps.
Turn on the computer and start Windows XP/Server 2003. Click [Start] of the task bar. Then, select [Printers and Faxes] from the Start menu. Exit from all active Windows applications, if required. The [Printers and Faxes] window appears.
Select the icon for the printer you want to delete. Then, click [Delete this printer]. The confirmation message will appear.

2 in 1

4 in 1

6 in 1

9 in 1

16 in 1

8 in 1
To print 2 pages on a double size single paper:(Combination (No Reduction)): Prints a document of 2 pages onto a single paper twice as big as a paper selected in the output paper.
Operating System Windows Printer Driver KONICA MINOLTA PCL PostScript PPD KONICA MINOLTA PS Mac OS 9 Mac OS X PostScript PPD PostScript PPD Refer to "Special Functions tab" on Page 8-39 "Advanced Options windows" on Page 920 "Special Functions" on Page 10-44 "Printer Specific Options dialog box (2)" on Page 11-24 "Image/Layout (Print window)" on Page 1218

2-in-1

ABCD ABCD

2-in-1 Repeat

2 Repeat Reversal
Basic Printing and Various Function To print a twofold booklet (Booklet):
Prints output paper so that they become a book when they are folded in two.
Operating System Windows Printer Driver KONICA MINOLTA PCL PostScript PPD KONICA MINOLTA PS Mac OS 9 Mac OS X PostScript PPD PostScript PPD Refer to "Setup tab" on Page 8-14 "Advanced Options windows" on Page 920 "Setup tab" on Page 10-16 "Printer Specific Options dialog box (2)" on Page 11-24 "Image/Layout (Print window)" on Page 1218
To print a specific page on the front face (Chapter): Prints a specific page so that it comes on the front, especially when printing on both sides of the paper.
Operating System Windows Printer Driver KONICA MINOLTA PCL KONICA MINOLTA PS Refer to "Per Page Setting tab" on Page 8-33 "Per Page Setting" on Page 10-38

1'st page of a chapter

Basic Printing and Various Function To print pages in facing up (Face up): Output paper facing up when printing multiple pages.

Face down

Face up
D CDDCDDDD D BACCACCC C AABBABABB AB AB

1111111 8

Not To print blank page: Selects not to print out blank pages in the document.
Operating System Windows Printer Driver KONICA MINOLTA PCL Refer to "Setup tab" on Page 8-14
To set the Front / Back cover, insertion sheet and cover sheet
Make settings for a front cover, back cover, insertion sheet and cover sheet in addition to pages to be printed. To set a Front Cover: Sets a front cover which uses a different paper from that for the body pages.
Operating System Windows Printer Driver KONICA MINOLTA PCL PostScript PPD KONICA MINOLTA PS Mac OS 9 Mac OS X PostScript PPD PostScript PPD Refer to "Per Page Setting tab" on Page 8-33 "Advanced Options windows" on Page 920 "Per Page Setting" on Page 10-38 "Printer Specific Options dialog box (2)" on Page 11-24 "Setup (Print window)" on Page 12-21
ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD

Front Cover - Off

Front Cover - Blank

Front Cover - Printed

Basic Printing and Various Function To set a Back Cover:
Sets a back cover which uses a different paper from that for the body pages.
ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD
ABCD ABCD ABCD ABCD ABCD ABCD ABCD

Back Cover - Off

Back Cover - Blank

Back Cover - Printed

To set an Insertion Sheet: Sets to insert a blank or printer paper which uses a different paper from that for the body pages.
ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD ABCD
Insertion Insertion sheet - Blank sheet - Printed
Basic Printing and Various Function To set a Thick Cover:
Output a thick paper as a cover, which is different from the output papers set.

Cover sheet feeder

To set a Tab Paper: Sets to print tab paper. You can set the text, tab position, and number of tabs.

To set for finishing

It is possible to use various functions such as stapling, punching, binding and folding for bookbinding and finishing. To set stapling: Staple output paper.
Operating System Windows Printer Driver KONICA MINOLTA PCL PostScript PPD KONICA MINOLTA PS Mac OS 9 Mac OS X PostScript PPD PostScript PPD Refer to "Setup tab" on Page 8-149 "Advanced Options windows" on Page 920 "Setup tab" on Page 10-16 "Printer Specific Options dialog box (2)" on Page 11-24 "Finishing (Print window)" on Page 12-11
Basic Printing and Various Function To set the Punch Unit: Sets to make the printer driver recognize an optional Punch unit. To use the punch unit, this setting is required to be made in advance.

Punch unit

To set punching: You can select to punch 2 or 3(4) holes in the output paper.
Basic Printing and Various Function To adjust printing position on the paper (Image Shift): Adjusts the printing position of documents to the output paper.
Basic Printing and Various Function To set Fold, Stitch and Trim:
Sets to fold an output paper at the center, bind it at the center, fold it in a Zshape or fold it into three, cut it.
Basic Printing and Various Function To set Perfect Binding: In this printing system, the setting of the roll-up bookbinding is available.
Operating System Windows Printer Driver KONICA MINOLTA PCL PostScript PPD KONICA MINOLTA PS Mac OS 9 Mac OS X PostScript PPD PostScript PPD Refer to "Special Functions tab" on Page 8-39 "Advanced Options windows" on Page 920 "Special Functions" on Page 10-44 "Printer Specific Options dialog box (2)" on Page 11-24 "Setup (Print window)" on Page 12-21

Performs basic settings of the printer.
The method to open the Printing Preference window depends on OS. Refer to "About Properties window" on Page 8-1 about how to open the Printing Preference window.
Paper - Orientation Sets the orientation to output paper in [Portrait] or [Landscape]. The default is [Portrait]. Paper - Original Size You can select a original size from the list shown by clicking [].
Document size that can be selected 12 x x 1/2 x 1/2 x 1/2 x 8 1/2 A3 A4 A5 Bx 420 mm 210 x 297 mm 148 x 210 mm 257 x 364 mm

182 x 257 mm

Document size that can be selected Bx 1/2 x 1/4 x 1/8 x 13 1/4 8K 16K Postcard 8 1/2 x 11 Tab A4 Tab 12 x 18 W 11 x 17 W 8 1/2 x 11 W 5 1/2 x 8 1/2 W A3 W A4 W A5 W B4 W B5 W Custom Size Settings Print Position Settings 100 x 148 mm
When [Custom Size Settings] is selected, it is possible to set and register the original size.
Paper - Output Size You can select a paper size from the list shown by clicking [].
Output size that can be selected Same as Original Size 12 x x 1/2 x 1/2 x 11
Output size that can be selected 5 1/2 x 8 1/2 A3 A4 A5 B4 Bx 1/2 x 1/4 x 1/8 x 13 1/4 8K 16K Postcard 8 1/2 x 11 Tab A4 Tab 12 x 18 W 11 x 17 W 8 1/2 x 11 W 5 1/2 x 8 1/2 W A3 W A4 W A5 W B4 W B5 W Custom Size Settings Print Position Settings 9 x 12 (Booklet only) 7 x 8 1/2 (Booklet only) 100 x 148 mm 297 x 420 mm 210 x 297 mm 148 x 210 mm 257 x 364 mm 182 x 257 mm
The default is the Same as original size.
PCL Printer Driver Setting (Windows) Custom Size Settings
When [Custom Size Settings] is selected from the [Original Size] or the [Output Size], [Custom Size Settings] dialog appears.
List of Custom Size Custom Size Name Size-Width Size-Length Size-Unit
Select from among 10 custom sizes of the paper. Edit the name of the custom size in the list above. Set the width of the selected custom size in the list (132-324 mm). Set the length of the selected custom size in the list for the current tray (150-460 mm). Select the units for setting [Width] and [Length].

Cover Print 1 in 1 This is used when arrangements are made in advance for the originals the front cover, the back cover and the spine of which have been cut and pasted to the same size as the paper used as the front cover. When printing the both sides of the front cover, it is necessary to make arrangements for the reverse side of the front cover in advance. NOTE: The use of [PI Tray] and [Perfect Binding Cover Tray] is not available for [Cover Print 1in1]. Ex.: When using [Cover Print 1in1] for the perfect binding.
Cover Print 1in1 (Both sides)
Cover Print 2 in 1 For the front cover, the first page and the last page (n page) of the originals are made as 2in1, and the second page up to the last page but one (n - 1 page) are printed as the body of documents with no printing made on the spine for perfect binding. And it is necessary to set in advance the width of the spine to the paper thickness. The setting can be made in units of 0.1 mm with the setting range between 1 to 30 mm.
NOTE: The use of [PI Tray] and [Perfect Binding Cover Tray] is not available for [Cover Print 2in1]. Ex.: When using [Cover Print 2in1] for the perfect binding.
Cover Print 2in1 (Both sides)
Cover Print 3 in 1 After cutting and pasting automatically the first page of the original on the front cover, the last page but one (n - 1 page) on the back cover, and the last page (n page) on 3in1 as the spine, the front cover is printed. And the second page up to the last page but two (n - 2 page) are printed as the body of documents. And it is necessary to set in advance the width of the spine to the paper thickness. The setting can be made in units of 0.1 mm with the setting range between 1 to 30 mm. NOTE: The use of [PI Tray] and [Perfect Binding Cover Tray] is not available for [Cover Print 3in1]. Ex.: When using [Cover Print 3in1] for the perfect binding.
Cover Print 3in1 (Both sides)
Perfect Binding cannot be set in the following cases: - When [PB-501] is not selected in [Option] tab.
PCL Printer Driver Setting (Windows) Tab Image Shift
This function is used to print the print content of the tab section edited in the original on the tab section of the Tab Paper. The shift of 10 to 15 mm (at intervals of 0.1 mm) is available only in the right direction. When setting the tray in which the Page Number and the Tab Paper are set in [Per Page Setting] (page 8-35), the relevant page is shifted to the right by the specified shift amount. However, since there is no function provided to specify the position of the tab, it is necessary to set up in advance the correct print information at the tab position.
The original sizes that can be used for this function are limited to A4 and Letter. It is necessary that the tray has been set on the copier side. Even if a shift is made, the original is not enlarged or reduced. The combined use with [Image Shift] (page 8-42) is available. (When this function is turned on, the setting of [Image Shift] is applicable only to those other than the Tab Paper.)

PCL Printer Driver Setting (Windows) Draft Print Prints lightly, which is switable for draft documents. Smoothing Prints the curved section of characters and images smoothly, when this printing system is used.
[Type 1] is suitable for printing the diagonal lines of normal characters and graphics.[Type 2] is suitable for printing the curved sections of normal characters.[Type 3] is suitable for printing the curved sections of ornamental writings and fine characters. When [Off] is selected, no smoothing operation is made.

Font tab

Performs settings of fonts for printing.
Use Printer Fonts This printing system allows you to replace the TrueType fonts with printer fonts while in printing. It is also possible to transmit detailed information concerning the replacement of fonts.
The TrueType fonts used to display the Windows screen are sent directly to the printer for each font data to be handled while in normal printing. Therefore, the same printing results as displayed on the screen can be obtained. When the printer fonts (those contained in the printer) are used, it is possible to send only character codes to the printer for a high speed printing. On this occasion, printing may not always be made as displayed on the screen. However, since the quantity of data sent to the printer is smaller, it is possible to make a high speed printing.
Use Printer Fonts - TrueType Font Substitution Table Displays the substitution settings of the True Type Font which is substituted with the built-in printer fonts. bizhub PRO 1050/1050e/1050P/1050eP 8-60
PCL Printer Driver Setting (Windows) Use Printer Fonts - Font Substitution Settings
Selects the printer fonts which substitutes for the highlighted True Type Font. Download Font Format Selects the font format to be downloaded to the printer (Outline or BMP).

Version tab

Checks the printer driver version from the [Properties] window.
Displays the version of the current printer driver.

Save/Restore Setting

Settings with the printer driver can be saved to be restored as required.

Per Page Setting - Edit Edits Per Page Setting. When select the Per Page Setting from the list and click this button, the [Per Page Setting] dialog mentioned above appears. Per Page Setting - Delete Deletes Per Page Setting. When select the Per Page Setting from the list and click this button, the selected setting is deleted. Per Page Setting - Clear All Deletes All Per Page Settings from the list.

10.13 Special Functions

Date/Time - Page to Print Specifies the pages to print the date and time.
All Pages Front Cover Only Date/Time is printed in the all pages. Date/Time is printed in the front cover only.
Page Number - Pages to Print Specifies the pages to print the page numbers.
All Pages Not Front Cover Not Front-Back Cover Page number is printed in the all pages. Page number is printed except front cover. Page number is printed except front/back cover.
Page Number - Start Page Specifies the first page to print the page numbers. Page Number - Starting Number Specifies the initial page number to print.
KONICA MINOLTA PS Printer Driver setting (Windows) Distribution Number Stamping - Type Specifies the type of the copy number to print. You can choose either from [Stamp] or [Watermark]. Distribution Number Stamping - Pages to Print Specifies the pages to print the copy number. You can choose either from [All Pages] or [1st Page Only]. Distribution Number Stamping - Starting Number Specifies the initial copy number to print.
Combination (No Reduction) [2 in 1], [2 repeat] or [2 repeat-reversal] setting is available which prints out two page data on one sheet of paper. Two page data is printed out on a sheet of paper twice as large as the selected size of paper.
KONICA MINOLTA PS Printer Driver setting (Windows) Fold Various ways of the folding can be setup.
Z-fold Half Fold In Half Fold Out Letter Fold In Letter Fold Out Zigzag Fold In Zigzag Fold Out Double Parallel Fold In Double Parallel Fold Out Gate Fold In Gate Fold Out Multi-Letter Fold In Multi-Letter Fold Out Multi-Half Fold Multi-Half Fold + Trim

Center Staple and Fold Center Staple and Fold + Trim
The [Fold] cannot be set in the following cases: - When the [Chapter] is available in the [Per Page Setting] tab.
KONICA MINOLTA PS Printer Driver setting (Windows) The setting of [Fold] is available when the following unit is installed.
Image Shift Adjusts the details of the printing position to the output paper.
KONICA MINOLTA PS Printer Driver setting (Windows) Image Shift - Settings When click this button, the [Image Shift Settings] dialog appears.
KONICA MINOLTA PS Printer Driver setting (Windows) Perfect Binding
The body of documents are not to be folded and cut out. The illustration above shows the example of [Left Binding]. For [Right Binding], see p. 10-28. [Left Binding] is specified as a default.
Paper type that can be used. Plane Paper Coated A/B Fine Book/News Embossed User Blank Insert Transparency and perforated paper not allowed.
Basic weight that can be used. 62-91 g/m2
KONICA MINOLTA PS Printer Driver setting (Windows) Ex.: When using [Cover Blank] for the perfect binding.
KONICA MINOLTA PS Printer Driver setting (Windows) Divide Output Repeats to staple and/or fold for every number of pages specified. Page per Section
When the [Divide Output] is selected, you can set the number of pages for repeating the function. Adhesive Binding Selects when doing adhesive binding using an adhesive binder. Pile Permission When another printed document remains in Stacker, gives the permission to stack the output. Setting the Pile Permission to OFF allows no pile on the stacker. When a job the pile of which is not permitted is on the stacker, no pile is made even if a pile permission is granted.
KONICA MINOLTA PS Printer Driver setting (Windows) Tandem Mode
KONICA MINOLTA PS Printer Driver setting (Windows) Tab Image Shift
This function is used to print the print content of the tab section edited in the original on the tab section of the Tab Paper. The shift of 10 to 15 mm (at intervals of 0.1 mm) is available only in the right direction. When setting the tray in which the Page Number and the Tab Paper are set in [Per Page Setting] (page 10-40), the relevant page is shifted to the right by the specified shift amount. However, since there is no function provided to specify the position of the tab, it is necessary to set up in advance the correct print information at the tab position.

Pages per Sheet Allocates a document of 2 pages, 4 pages, 6 pages, 9 pages or 16 pages onto a single page for printing. The allocated pages are automatically reduced for printing based on the printable region of the output paper.
Layout Direction Selects the layout direction the pages allocated onto a single paper.
PostScript PPD Printer Driver setting (Mac OS X) Border Selects whether draw a frame or line as the border between pages. Two Sided Printing
Set either [Long-Edge Binding] or [Short-Edge Binding] for two sided printing.
Paper Feed (Print window)
Selects [Duplex] on the pop-up menu in the [Print] window.
Paper Feed Selects the paper source.
If you use [Auto Select], a paper feed tray is automatically selected. The paper specified in [Page Attributes] of this printing system is set on the tray.

Finishing (Print window)

Selects [Finishing] on the pop-up menu in the [Print] window.
Collate It is possible to print the required number of the first page, and then the required number of the second pages, the third page,. collectively when printing multiple sets of pages. Offset Selects to shift the exit position of each set of print out back and forth when printing multi set of copies. The [Offset] cannot be set in the following cases: - When the [Post Card], or [Custom] is selected for [Page Setup] - [Paper Size]. Pile Permission When another printed document remains in Stacker, gives the permission to stack the output. Setting the Pile Permission to OFF allows no pile on the stacker. When a job the pile of which is not permitted is on the stacker, no pile is made even if a pile permission is granted. bizhub PRO 1050/1050e/1050P/1050eP 12-11
PostScript PPD Printer Driver setting (Mac OS X) Tandem Mode
Tandem Mode cannot be set in the following cases: - When [Transparency Interleave] is selected in [Setup] window.
PostScript PPD Printer Driver setting (Mac OS X) Output Tray Selects the output tray.
Each of them can/cannot be set in the following cases: - Each options which is not selected on the [Printer Info] window cannot be set. - When [Staple] is available, any item other than [Default] and [Stapler Main Tray] can not be set. Output Order Selects the output order. - [Face Down] outputs paper with the printed side facing down.[Face Up] outputs paper with the printed side facing up. Image Order Select the image order. The [1 to N] outputs paper starting with the first page. The [N to 1] outputs paper starting with the last page. Binding Position Sets the binding position for the document to be printed. The position selected here will be the position of stapling, punching and base position of the image shift. Duplex Prints continuous multiple pages on both front and back sides.

General Problems of Printing
The Print Controller does not respond to the Print command.
Check that the printing system is selected as the current printer. The printing system must be selected as the current printer on Windows before printing.
Check that the power switch of the copier is turned on. Print the Test Page from Windows/Macintosh. When you cannot print a job from an application even though you can print a test print, contact a system administrator or a service representative.
If the message Error is displayed, check that the control panel is in copy mode, not scanner mode.
Cannot select any media other than [Plain paper] from [Media].
For the PCL Driver, select [Restore Defaults] from the [Paper] tab or [Per Page Setting] tab to restore the default setting. Set [Paper Source] to a setting other than [Auto Select].
A message requesting a paper size you did not specify is displayed. Cancel the job to change the paper size in the Page (Paper) Setup dialog on your application. Touch and select the desired size displayed in the paper sizes area of the control panel, then press [START]. The forced output will start.
Troubleshooting You cannot print the test print.
Check the LCD of the main body printer control panel. When Ready to copy is displayed on the LCD, go to Step 3. When a diagnostic message or an error message is displayed on the LCD, refer to the operating manual of the main body printer (copier). When the LCD is blank, go to Step 2.
Press [POWER SAVER ON/OFF] on the control panel. When the main body printer is used in the Power Save mode, press this switch to show the LCD in the Display mode.
Try to make a copy. When copying is available, go to Step 4.
Turn off the copier and wait for 10 seconds, then restart it. Print the test print again after the print controller is ready. Contact your Konica Minolta service representative if you cannot print the test page after performing the above procedures.

Resolution RGB

Screen font Shared printer Single page TIFF SMTP SNMP

Subset mask

TCP/IP

Trimming

Item TrueType Description A type of outline font. Developed by Apple and Microsoft and employed for Macintosh and Windows as the standard outline font. Can be used for both displays and prints. Standard for the interface between the image input devices such a scanner or digital camera and applications such as graphic software. To use devices supporting TWAIN, a TWAIN driver is required. To delete installed software. Abbreviation of Universal Serial Bus. General-use interface standard for connecting a computer and a mouse, printer, etc. Software to access web pages. Internet Explorer, Netscape Navigator, etc. are examples.

Uninstall USB

Web browser
KONICA MINOLTA PS Printer Driver.. 10-1

16.2 A

Automatic installation.. 3-1
Local printing.. 4-1 Log/Phys.. 10-28
Back Cover Page..8-34, 9-29, 10-39, 11-32, 12-23 Binding Position.. 8-21, 12-13 Booklet.. 10-25, 11-12

Media.. 11-23

Network printing.. 5-1 N-up.. 10-24
Center Staple and Fold. 8-25 Chapter.. 8-35, 10-40 Combination.8-22, 8-40, 9-24, 11-26, 12-18 Compliant OS. 4-2, 5-2
Offset.. 9-22 Option.. 10-14 Original Size.. 8-14, 10-17 Output Size. 8-15, 10-18 Output Tray.. 11-25, 12-13 Overlay. 8-51, 10-61
Date/Time. 8-56, 9-39, 10-44 Deletion of printer driver by Manual operation. 6-3 Deletion of printer driver with installer (PCL). 6-1 Duplex.. 9-24, 11-26, 12-13
Page Number. 8-57, 10-44 Pages Per Sheet.. 9-17 Pages per sheet.. 11-20 Paper Color.8-20, 9-23, 10-22, 11-25 Paper Feed.. 12-10 Paper Size.. 9-20, 12-3 Paper Source. 10-19 Paper Type.. 8-20, 10-22 Paper Type Settings.. 8-19, 10-19 PCL.. 4-2, 5-2 Per Page Setting.. 8-35 PI Cover Sheet. 8-34 PI Front Cover.. 9-30 Poster.. 10-27 PostScript.. 4-2, 5-2 PostScript3.. 2-3
Fold.8-41, 9-27, 10-46, 11-29, 12-16 Front Cover Page..8-33, 9-29, 10-38, 11-31, 12-23
Hole-Punch. 8-25, 10-30, 12-15
Image Rotation.. 10-64 Image Shift. 10-47, 11-31, 12-19 Installable Option.. 9-15 Installer.. 3-1
Appendix Pre-Punched Paper. 8-21, 9-23 Print Density.. 10-65 Print Position. 11-24 Printer View. 8-66, 10-69 Proof and Print. 8-29, 10-34, 12-33 Properties window. 8-2, 9-2, 10-2 Punch.. 9-26, 11-28
Save in User Box.. 8-28 Save/Restore Setting. 8-63, 10-68 Secure Print. 8-26, 10-31, 12-30 Smoothing..8-59, 9-38, 10-65, 11-39, 12-20 Specifications.. 2-6 Staple 8-24, 9-25, 10-29, 11-27, 12-14