Main body + PF-701 + FD-503 + PB-502
Main body + PF-701 + SD-506 + PB-502
15.3 (389) 48.5 (1231) 48.1 (1223) 62.2 (1580) 40.2 (1020)
Main body + PF-701 + FD-503 + SD-506 + PB-502
Main body + PF-701 + LS-501/LS-505 + PB-502
15.3 (389) 62.2 (1580) 48.1 (1223) 40.2 (1020)
Main body + PF-701 + PB-502
Main body + PF-701 + FD-503
Main body + PF-701 + LS-501/LS-505 + SD-506 + FS-503
Main body + PF-701 + FD-503 + LS-501/LS-505 + PB-502

Machine Configuration

Standard/Optional Equipment

Folding Unit FD-503

Saddle Stitcher SD-506 + Folding Unit FD-503 Main Body 1050/1050e + Paper Feeder Unit PF-701 + Reverse Automatic Document Feeder DF-603
Finisher FS-503 + Saddle Stitcher SD-506 + Folding Unit FD-503
Large Capacity Stacker LS-502/LS-505 + Folding Unit FD-503
Main Body 1050P/1050eP + Paper Feeder Unit PF-701
Finisher FS-503 + Large Capacity Stacker LS-501/LS-505 + Folding Unit FD-503
Machine Configuration (continued)
Perfect Binder PB-502 + Folding Unit FD-503
Perfect Binder PB-502 + Large Capacity Stacker LS-501/LS-505 + Folding Unit FD-503
Perfect Binder PB-502 + Saddle Stitcher SD-506 + Folding Unit FD-503
Main Body 1050/1050e + Paper Feeder Unit PF-701 + Reverse Automatic Document Feeder DF-603

Saddle Stitcher SD-506

Finisher FS-503 + Saddle Stitcher SD-506 Main Body 1050P/1050eP + Paper Feeder Unit PF-701
Perfect Binder PB-502 + Saddle Stitcher SD-506

Perfect Binder PB-502

Large Capacity Stacker LS-505
Finisher FS-503 + Large Capacity Stacker LS-505
Saddle Stitcher SD-506 + Large Capacity Stacker LS-505
Finisher FS-503 + Saddle Stitcher SD-506 + Large Capacity Stacker LS-505
Perfect Binder PB-502 + Large Capacity Stacker LS-505
Large Capacity Stacker LS-502 + Large Capacity Stacker LS-505
Finisher FS-503 + Large Capacity Stacker LS-505 (x2)
No. Name Secondary (Sub) tray Top cover handle (left) Top cover handle (right) Paper removal indicator Paper removal button Large capacity stacker door Outlet cover lever Secondary (Sub) tray conveyance cover handle Stacker conveyance knob Secondary (Sub) tray conveyance knob Outlet knob Inlet lever Stacker Outlet lever Carriage Paper holder Paper stopper Description Holds sets output in Non-sort mode. Opens to remove mishandled paper. Opens to remove mishandled paper. Lights while the stacker goes down in order to allow takeout of printed sheets. Pressed to take out printed sheets from the stacker. Opens to take out printed sheets from the stacker. Opens to remove mishandled paper. Opens to remove mishandled paper.
Can be turned clockwise to feed mishandled paper to the stacker. Can be turned clockwise to feed mishandled paper to the secondary (sub) tray. Can be turned clockwise to feed mishandled paper to the outlet. Opens downward to remove mishandled paper. Holds sets output in Non-sort mode or Collate mode (offset). Opens downward to remove mishandled paper. Carries paper together with the stacker. Mounts paper stopper for holding output paper. Holds output paper.

Return the paper stopper to its original position. Return the paper stopper properly; otherwise the Stacker door may not be closed.
Using Folding Unit FD-503
The following punch/folding patterns are available: Punch : 2 or 3 holes can be punched in sheets for filing purposes. Set left/right/ top position according to the placement of sheets. Folding: Six folding types are available - Z-Fold, Letter Fold-in, Letter Fold-out, Double Parallel, Gate, and Folding. Choose to print outside the fold (outside print) or inside (inside print) for each folding mode except Z-fold.

2.756" (70 mm)

Z-Fold

Letter Fold-out

Folding
4.252" (108 mm) Letter Fold-in Double Parallel Gate
With Folding Unit FD-503 installed on the machine as a single finishing option, the two output trays are available, to each of which is allotted with output modes as described below. Primary (Main) tray: Half Fold, Z-Fold, Punch, Non-sort (straight delivery) Fold mode tray: Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate Fold
A secondary (sub) tray is also available in place of the fold mode tray. Contact your service representative, if desired.
Using Folding Unit FD-503 (continued)
Punching File Holes in Copies (1050/1050e only)
Copies will be punched in this mode. Follow the procedures below to select 2- or 3hole punch and punch position.
Touch Punch on the Copy Screen The Output Application Icon shows the number of punch holes and punch position.
If you want to change number of punch holes and position, proceed to the following steps.
Touch Output Application. The Output Application Screen appears.
Touch Punch and select the number of punch holes and position. The Hole-Punch Screen appears.
Touch any punch key to select it.
Touch OK. It will return to the Output Application Screen.
If you touch Cancel, it returns to the previous setting. If you touch Function Off, punch output will be turned off but the selected punch settings will be kept in memory.
Touch OK on the Output Application Screen. The icon of the specified output application appears on the Copy Screen.
Be careful not to exceed the capacity of the tray to be delivered with output sheets when selecting the print quantity, otherwise unexpected trouble may be caused.

Folding Copies (1050/1050e only)
Copies will be folded in this mode. Follow the procedures below to select from six folding types.
Specifications for Folding Copies
Folding types: Z-Fold, Letter Fold-in, Letter Fold-out, Double Parallel, Gate, Folding Sheets placed on the post inserter can also be folded. When using Double Parallel or Gate Fold mode, manually pull down the coordinating stopper.
Touch Output Application on the Copy Screen. The Output Application Screen appears.
Touch Folding to select a folding type. The Folding Mode Screen appears.
The printed side cannot be selected when Z-Fold is selected.
If you touch Cancel, it returns to the previous setting. If you touch Function Off, folding output will be turned off but the selected folding settings will be kept in memory.
Using Post Inserter on Folding Unit FD-503
This function uses the post inserter on Folding Unit FD-503 to attach a cover. Using Sheet Insertion function, cover sheets loaded in the top/bottom tray of the post inserter can be attached as a front cover, back cover, or insertion sheet to output copies, in order to create a stapled book with a cover and chapter title pages. You can also use the Booklets Cover with Blank Sheet mode and Sheet Insertions Cover mode in combination to make a double-covered booklet. Use the Perfect Binding mode to attach a cover loaded in the top/bottom tray of the post inserter, in order to create a perfect-bound book.
Covers and insertion sheets
Copied set with covers attached in staple mode
Copied set with covers and insertion sheets attached

Cover sheet

Body set with cover attached in perfect binding mode
Using Post Inserter on Folding Unit FD-503 (continued)
Place paper on the upper and lower trays of the post inserter.

Upper tray

Lower tray
Do not load more than 500 sheets (20 lb) for each of the upper and lower trays. Do not load above the load limit line on the guide plate.
Use the sheet insertion or booklet function to place a cover sheet.

Be careful not to exceed the finisher tray capacity when selecting the print quantity, otherwise unexpected trouble may be caused.
To prevent small cover sheet from skewing
The small cover sheet may be skew, when loading it in the upper/lower tray of the post inserter. Three paper rollers are attached to the upper/lower tray respectively. To lock the roller both sides, prevent paper from skewing. Push the both roller lock levers to inside to lock them.
Be sure to lock both sides, when locking the paper rollers. Do not lock the paper rollers normally.
Using Folder/Finisher Functions Manually
The following finishing functions are manually available with a set of paper loaded in the upper tray of the post inserter of Folding Unit FD-503. Folding Unit FD-503 only: Z-Fold, Tri-Fold-in, Tri-Fold-out, Double Parallel, Gate Fold, Half Fold, 2 Holes Punch, 3 Holes Punch Folding Unit FD-503 + Finisher FS-503: 1 Stapling/ 2 Stapling in addition to the functions for folding unit only Folding Unit FD-503 + Saddle Stitcher SD-506: Fold & Staple in addition to the functions for folding unit only Folding Unit FD-503 + Finisher FS-503 + Saddle Stitcher SD-506: All functions are available.
Specifications for Using Folder/Finisher Functions Manually
When using folder/finisher/saddle stitcher functions manually, paper should be placed only in the upper tray of the post inserter. Multi-feed detection is a feature that automatically stops the machine if more than one sheet is fed at a time. The post inserter is designed to detect multifeeding. Coated paper and other kinds of smooth surface paper may activate this function even if a single sheet is fed, stopping the machine. Should this case occur frequently, press the Multi-Feed Detection button and light up the lower lamp, in order to turn the function OFF.
Multi-Feed Detection 1 Stapling Function ON

2 Holes Punch

Letter Fold-in Folding
Multi-Feed Detection 2 Stapling Function OFF

3 Holes Punch

Double Parallel
Fold & Staple Start/Stop button Multi-Feed Detection button Punch selection Staple Selection button button Fold Selection button
Using Folder/Finisher Functions Manually (continued)
Place paper in the upper tray of the post inserter.

Touch Fold&Staple, then select to use Trimming or not. The Fold&Staple Screen will be displayed.
Touch Trimming or Non Trimming to select it.
Touch OK. The Output Application Screen will be restored.
If you touch Cancel, the previous setting will be restored. Touching Function Off will deselect the Fold&Staple (and Trimming) mode, however, the specified setting will be kept in memory.
Touch OK on the Output Application Screen. The output icon of the selected output mode will be displayed on the Copy Screen. Booklet function in the Application setting has been selected automatically.
Withdraw the Saddle stitcher tray. Open the tray stand when fully withdrawn.
The folded and stapled (and trimmed) sets will be delivered into the Saddle stitcher tray. If the tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications.
Never return the Saddle stitcher tray to its original position with the tray stand opened.
Folding Copied Set (1050/1050e only)
Machine with the Saddle Stitcher SD-506 installed provides Multi Center mode to double-fold up to 5 sheets of copied set, or Multi Letter mode to fold it inside in three. Using Multi Letter, the print side can be specified on the screen.
Specifications for Multi Center / Multi Letter
Using Multi Half Fold mode, the finished sets will be delivered to the saddle stitcher tray. Using Multi Tri-Fold mode, the finished sets will be delivered to the multi-folding mode tray.
Multi Center + Non Trimming Multi Center + Trimminng Multi Letter + Inside Print Multi Letter + Outside Print
Touch Multi Center or Multi Letter to select it. If Multi Center is selected, the Multi Center Screen will be displayed to specify whether or not to trim the edge of the folded sheets.
Touch Trimming or Non Trimming to select it. Touch OK. The Output Application Screen will be restored. If Multi Letter is selected, the Multi Letter Screen will be displayed to specify the print side.
Touch Outside Print or Inside Print to select it. Touch OK. The Output Application Screen will be restored.
If you touch Cancel, the previous setting will be restored. Touching Function Off will deselect the mode, however, the specified setting will be kept in memory.
Touch OK on the Output Application Screen. The output icon of the selected output mode will be displayed on the Copy Screen. With Multi Center selected, Booklet function in the Application setting has been selected automatically.
If Multi Center is selected, withdraw the Saddle stitcher tray. Open the tray stand when fully withdrawn.
The double-folded sets will be delivered into the Saddle stitcher tray. If the tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications. The triple-folded sets will be delivered into the Multi-folding tray.

Using Perfect Binder PB-502
The machine with the optional Perfect Binder PB-502 installed automatically attaches a copied set with a cover sheet to make a perfect-bound book, applying a dab of glue in the center line of the cover sheet to fix the spine. In the Perfect Binding mode, both simplex and duplex copying are available for the body set, and also the cover sheet can be blank, simplex-printed or duplex-printed, and even trimmed to match with the thickness of the body set to cover. The binding direction can be selected from left and right.
Use only the paste GC-501 for this binder. Handle melted hot paste only with great care. In order to prevent degradation of paste owing to heating, ensure that the machine is turned off when it is not in use. It is recommended that you adjust the time settings for the low power mode and shut-off mode to the main body to suite the usage of the Perfect Binder, since they apply to the binder as well.
Body set Back side of Front cover Cover lead edge adjustment
Left binding (When right binding, the cover is upside down.) Back side of Back cover Head
Cover Cover trimming Front side of Front cover Spine width Foot Front side of Back cover
Using Perfect Binder PB-502 (continued)

Even number originals

Body set: simplex, Cover print: Off Blank Blank
Blank Body set: duplex, Cover print: Off Blank
Blank Body set: duplex, Cover print: On, Cover print side: simplex
Blank Body set: duplex, Cover print: On, Cover print side: duplex

Body set

Odd number originals
Blank Body set: duplex, Cover print: On, Cover print side: duplex Blank
Specifications for Using Perfect Binder PB-502
Warm-up/Low Power/Shut-Off The perfect binder requires longer warm-up time than that required for the main body, while the Low Power/Shut-Off mode activates at the same time on main body and perfect binder. We recommend you to specify the time to activate the Low Power/Shut-Off mode in view of the frequency to use the perfect binder. Paper tray Body: Tray 1 to 5 Cover: Tray 1 to 5 (available for Cover Print), Cover feeding tray of Perfect binder (unavailable for Cover Print), Upper/Lower tray of the post inserter on Folding unit (unavailable for Cover Print) Paper size Body: Standard sizes 8.5" 11", 5.5" 8.5", A4, B5, A5, 16K (11" 17", 8.5" 11"R, A3, B4, A4R, 8K when using Z-Fold mode) Wide sizes 8.5" 11"W, 5.5" 8.5"W, A4W, B5W, A5W Custom sizes*1 5.91" 5.51" min. to 12.09" 8.70" max. Cover: Custom size*1 Length (head to foot): Same as that of body set (within +5 mm) Width: Book width 2 + body sets thickness (1 mm or more) + (3 mm or more of trimming width if Trimming mode is specified) The maximum size accommodable in each tray is as follows. Tray 1 to 5*2: 5.91" 11.06" min. to 12.76" 18.11" max. Cover feeding tray of Perfect binder: 5.91" 11.06" min. to 12.99" 18.58" max. Upper/Lower tray of the post inserter on Folding unit: 7.17" 11.06" min. to 12.99" 19.02" max. Paper weight Body: 13 to 80 lb Bond (*3Available weight can be specified from 62 ~ 71 g/m2 to 72 ~ 91 g/m2.) Cover: 22 to 42 lb Bond (*3Available weight can be specified from 72 ~ 91 g/ m2, 92 ~ 130 g/m2, to 131 ~ 161 g/m2.) Number of sheets to be bound: 10 sheets min. to 300 sheets max., or within 30 mm thick*4 Fine/Colored/Matted: 10 sheets min. to 150 sheets max., or within 15 mm thick*3 Z-folded insertions: 4 sheets max. for standard/recycled, or 2 sheets max. for simplex-copied 2 sheets max. for fine/colored/matted Maximum number of Z-folded insertions and body sheets:

Making Perfect-Bound Book (1050/1050e only)
Load paper for body sets and covers in each tray to be used. Load paper for body sets in one of the tray 1 to 5. When printing on covers, also load cover sheets in one of the tray 1 to 5. If cover print is not required, load cover sheets in one of the tray 1 to 5, cover feeding tray of Perfect binder, and upper/lower tray of post inserter on Folding unit.
While the Perfect binder is warming up, the Machine Status Screen will prompt you the current warmup status of the machine.
Custom paper size is to be used as cover. Be sure to check the precise dimensions in order to specify them during this procedure. If Cover Trimming is desired, be sure to use the size that secures 3 mm to 40 mm of trimming width. When using the Post Inserter, touch [For P.B. Cover] on the Machine Status Screen to highlight it.
Touch COPY tab to display the Copy Screen, select the tray loaded with paper for body sets, and change the paper setting as required.
The paper size will be detected automatically. If paper weight specified for the tray loaded with paper for body sets is inadequate, the binding operation cannot be performed. Select one from 62-71g and 72-91g.
The binding operation may not be performed even if the paper weight mentioned above is specified. For details, see POD Administrators reference, p. 5-26. The number of body set may be limited depending on the selected paper weight. For details, see POD Administrators reference, p. 5-27.
Touch Output Application, then touch Perfect Bind.
The Perfect Binding Screen will be displayed.
Select the tray loaded with covers, then specify the paper setting. (1) Touch Cover Tray to display the Cover Tray Screen.
(2) Touch the tray loaded with covers in step 1 to highlight it.
If any other tray than tray 1 to 5, the Cover Print setting in step 5 will be limited to Cover Print Off.
(3) Touch Change Paper Set to display the Tray Setting Screen.
(4) Enter the cover paper dimensions. Touch Size Setting to display the Size Setting Screen.
Use the screen keypad or arrow keys and to enter the dimensions of the covers loaded in step 1, then touch OK.
Be sure to enter the cover paper dimensions precisely; otherwise a message may be displayed to prompt you that the specified size is inadequate, or the trimming function may not be performed properly.
(5) Specify the paper type and weight. Touch Change to display the Change Setting Screen.
Touch Type to select the desired paper type, then touch OK.

Touch Front or Back to select the printed side, then Up/Down or Right/ Left to select the direction to be adjusted. Use +5 to select positive/negative, then use the screen keypad, arrow keys and , or the control panel keypad to enter the desired value. Touch OK to complete the setting.
9. Touch OK to return to the Copy Screen. 10. Select additional copy conditions, as desired.
When making double-sided copies, select 1-2 or 2-2. If the original count exceeds 100, use Memory Scan mode. Proof copy is recommended before making multiple sets. After proof copying, the thickness of body set will be displayed on the Perfect Binding Screen. Use this information if making any adjustment.
11. Enter the desired print quantity from the control panel keypad.

12. Position originals.

If Cover Print On is selected, refer to p. 47 to p. 48.
13. Press [Start] on the control panel.
Copying does not start while the Perfect binder is warming up. When warmup is completed, the machine operation starts automatically.
Never open the front door of the Perfect binder while the machine operation is in process; otherwise the machine immediately stops the operation and paper jam may be caused.
If the cover width has been specified improperly, the machine temporarily stops its operation with a popup menu displayed to ask you whether or not to continue the operation. Machine manager can set the machine to display/disappear this popup menu. For details, see POD Administrators reference, p. 5-28.
14. Take out the perfect-bound books from the perfect binder tray.
To take out the books stacked in the rear side of the perfect binder tray, press the feeding button to move them forward.
Open the perfect binder tray cover.
The perfect binder tray cover will not open while the machine operation is in process, and also the feeding button will not function.
Take out the books, then close the perfect binder tray cover.
Paper and Original Information
This machine is additionally provided with the following trays for loading copy paper. Cover feeding tray of Perfect Binder PB-502 Post Inserter (attached to Folding Unit FD-503) Also, the following additional equipment is provided for conveying/delivering copies. Folding Unit FD-503 Saddle Stitcher SD-506 Large Capacity Stacker LS-505 Perfect Binder PB-502 Refer to the following information on paper capacity for each.

Paper Weight

Paper Trays Tray 1 and 2 (Main body trays) Tray 3 and 5 (PF-701 trays) Weight 11 to 64 lb Bond Cover paper for perfect binding: 22 to 42 lb Bond 11 to 64 lb Bond Cover paper for perfect binding: 22 to 42 lb Bond 11 to 80 lb Bond Cover paper for perfect binding: 22 to 42 lb Bond

Tray 4 (PF-701 tray)

Cover feeding tray (Perfect 22 to 42 lb Bond Binder PB-502) Post Inser ter Upper/Lower 13 to 80 lb Bond tray (attached to Folding Unit Cover paper for perfect binding: 22 to 42 lb FD-503) Bond
Be sure to use paper only of the weight specified for the tray; otherwise copy quality may be deteriorated or machine trouble may occur.
Paper weight is to be specified for each paper tray in the paper setting.
The paper weight specified for each tray can be registered and deleted in the User Setting. For details, see pages 1-7 and 1-11 of POD Administrators reference. Paper weight for cover sheets to be used in perfect binding can be specified in the Output Application setting. See p. 52 for details.
Paper and Original Information (continued)
Equipment Folding Unit FD-503 Fold mode tray Weight Tri-Fold-in, Tri-Fold-out: 13 to 34 lb Bond Double Parallel, Gate Fold: 13 to 24 lb Bond 13 to 64 lb Bond Punch: 13 to 55 lb Bond Z-Fold, Tri-Fold-in, Tri-Fold-out, Half Fold: 13 to 34 lb Bond Double Parallel, Gate Fold: 13 to 24 lb Bond 13 to 80 lb Bond 13 to 64 lb Bond 13 to 80 lb Bond Fold & Staple, Trimming: 13 to 64 lb Bond Multi Half Fold of 5 sheets: 13 to 21 lb Bond Multi Half Fold of 3 sheets: 22 to 34 lb Bond Multi Half Fold of 2 sheets: 35 to 64 lb Bond Multi Tri-Fold of 5 sheets: 13 to 21 lb Bond Multi Tri-Fold of 3 sheets: 22 to 24 lb Bond 13 to 80 lb Bond Body: 17 to 24 lb Bond Cover: 22 to 42 lb Bond

Primary (main) tray

Large Capacity Stacker LS-505 Saddle Stitcher SD-506
Secondary (sub) tray Stacker Secondary (sub) tray Saddle stitcher tray
Multi trifolding mode tray Perfect Binder PB-502 Secondary (sub) tray Perfect binder tray

Add Staples

Inserting a New Staple Cartridge into Saddle Stitcher SD-506
When the staple cartridge of the Saddle Stitcher SD-506 is empty, the Cartridge indicator lights in red in the option status area of the Machine Status Screen. If printing job is in progress, a message will be displayed on the Copy Screen.
Follow the procedure below to replace the staple cartridge.
Open the left side door of the Saddle Stitcher.

Add Staples (continued)

Remove the empty cartridge. Hold both left and right sides of the staple cartridge, then draw it forward.
The machine is mounted with two staple cartridges. Be sure to remove the empty one.

Set the new cartridge.

Check that the top side of the staple cartridge is up, otherwise it cannot be inserted.
Close the left side door of the Saddle Stitcher.
Empty Punch Trash/Trim Dust
Empty Trash Basket of Folding Unit FD-503
When the trash basket becomes full, the Punch Dust indicator lights in red in the option status area of the Machine Status Screen.
Follow the procedure below to empty the trash basket.
Open the Finisher door, then withdraw the trash basket.
Empty Punch Trash/Trim Dust (continued)

Empty the trash basket.

Return the trash basket to its original position, then close the Finisher door securely.
Empty Dust Box of Saddle Stitcher SD-506
When the dust box of the Saddle Stitcher SD-506 becomes full, the Trim Dust indicator lights in red in the option status area of the Machine Status Screen. If printing job is in progress, a message will be displayed on the Copy Screen.
Follow the procedure below to empty the dust box.

Withdraw the dust box.

The dust box cannot be withdrawn while machine operation is in progress. Be sure to confirm that the machine has stopped its operation before withdrawing the dust box.
Open the top cover of the dust box.
Take waste paper out of the dust box.
Close the top cover of the dust box, then return it to its original position.
Be sure to return the dust box to its original position, otherwise the trimming function cannot be performed.
Empty Dust Box of Perfect Binder PB-502
When the dust box of the Perfect Binder PB-502 becomes full, the Trim Dust indicator lights in red in the option status area of the Machine Status Screen. If printing job is in progress, a message will be displayed on the Copy Screen.
Open the front door of the perfect binder.
Do not open the front door while machine operation is in progress, otherwise a paper jam may be caused. Be sure to confirm that the machine has stopped its operation before opening the front door.
Return the dust box to its original position, then close the front door of the perfect binder.

Specifications

Name: Function: Paper types: Paper sizes: LS-505 Stack printed paper Stacker: 13 to 64 lb Bond Secondary (sub) tray: 13 to 81 lb Bond Stacker: 12" 18 w, 11" 17" w, 8.5" 14" w, 8.5" 11" w/v, A3 w, B4 w, A4 w/v, B5 v, A5 v, Foolscap, 8K w, 16K v, Wide Size and custom sizes (max. 13.03" 19.21" (331 mm 488 mm) to min. 8.27" 5.83" (210 mm 148 mm)) Secondary (sub) tray: 12" 18 w, 11" 17" w, 8.5" 14" w, 8.5" 11" w/v, 5.5" 8.5" w/v, A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v, B6 w, A6 w, Foolscap, 8K w, 16K w/v, Wide Size and custom sizes (max. 13.03" 19.21" (331 mm 488 mm) to min. 3.94" 5.83" (100 mm 148 mm)) Tabbed paper is output to the secondary (sub) tray. See p. 69 for details. Stacker: 5,000 sheets 2,000 sheets for B5 w and A5 w 3,000 sheets for Coated paper and max. 13.03" 19.21" (331 mm 488 mm) to min. 8.27" 14.96" (210 mm 380 mm) paper Secondary (sub) tray: 200 sheets Supplied from internal battery 30.9 (W) 28.5 (D) 40.2 (H) inches Approx. 243 lb

Capacity:

Power source: Dimensions: Weight:
Specifications (continued)
Name: Function: Number of punch holes: Hole diameter: Hole pitch: Fold type: Paper types: FD-503 Distributes output 2 or 3 6.5 0.5 mm 2 holes: 2.76" (70 mm) 3 holes: 4.25" (108 mm) Z-Fold, Tri-Fold-in, Tri-Fold-out, Half-Fold, Double Parallel, Gate Fold Primary (main) tray: 13 to 64 lb Bond Fold mode tray: 13 to 34 lb Bond (See p. 64 for details.) See p. 68 for details. Primary (main) tray: 2,500 sheets max. Fold mode tray: 30 sets max. (See p. 65 for details.) Supplied from finisher 15.7 (W) 28.5 (D) 48.5 (H) inches Width including primary (main) tray: 26.3 inches/ 30.9 inches (pulled out) Approx. 287 lb
Paper sizes: Output tray capacity:
Power source: Dimensions:

Weight:

Name: Function: Binding pitch: Binding capacity: Paper types: Paper Sizes: SD-506 Multi half fold, Fold & staple, Trimming, Multi tri-fold 90 to 165 mm Max. 50 sheets Fold & staple, Trimming: 13 to 64 lb Bond (See p. 64 for details.) Fold & staple, Trimming: 12" 18" w, 11" 17" w, 8.5" 14" w, 8.5" 11" w, A3 w, B4 w, A4 w, B5 w, Foolscap, 8K w, 16K w (See p. 69 for details.) See p. 65 for details. 270VA 46.1 (W) 30.5 (56.7" when tray is pulled out) (D) 40.2 (H) inches Supplied from internal battery Approx. 580 lb
Paper tray capacity: Maximum power consumption: Dimensions: Power source: Weight:
Name: Function: Number of sheet (1 set): PB-502 Perfect binder tray: Hot-melt type binding, Trimming Secondary (sub) tray: straight delivery 10 to 300 sheets, or within 30 mm thick 10 to 150 sheets, or within 15 mm thick for colored, fine and matted paper 10 to 110 sheets for 22 to 28 lb Bond paper For details of Z-folded insertions, see p. 49. Perfect binder tray: Body 8.5" 11" v, 5.5" 8.5" w/v, A4 v, B5 v, A5 w/v, 16K w/v Cover 5.47" 11.69" min. to 12.09" 18.58" max. (139 mm 279 mm min. to 307 mm 472 mm max.) (custom size) For details of available sizes in Perfect binding mode, see p. 49. Secondary (sub) tray: min. 13.0" 19.2" (100 mm 148 mm) to max. 13.03" 19.21" (331 mm 488 mm), Standard tab paper Perfect binder tray: 17 to 24 lb Bond (body) 22 to 42 lb Bond (cover) Secondary (sub) tray: 13 to 80 lb Bond Perfect binder tray: Plain, Fine (body) Fine, Coated (cover) Secondary (sub) tray: Plain, Fine, Coated, Special, Labels, Tab paper Cover feeding Tray: 1,000 sheets (22 lb Bond) 5,00 sheets (43 lb Bond) Perfect binder tray: 30 mm thick (300-sheet-bound) booklet 11 sets 2 (approx. 6,600 sheets) Secondary (sub) tray: 200 sheets (Full-load detection- function is available.) Approx. 20 minutes 51.3 (W) 30.5 (D) 48.2 (H) inches Approx. 463 lb Supplied from internal battery 1,000 W max.

Paper Sizes:

Paper weight:

Paper types:

Stack capacity:
Warm-up time: Dimensions: Weight: Power source: Power consumption:

56UA962200

To resolve conflicts with installable options, make sure the installable option is activated as described in section Installable Options.

Windows Printing 23

Printing from Special Applications
Printing from Adobe PageMaker In order to ensure that imposition (Layout not equal Off in the Layout panel) works correctly, you must instruct PageMaker to generate page independent code. In PageMakers Print dialog, select Options. This opens the Options panel. Check Page Independence.
This will let PageMaker create page independent code suitable for imposition. Printing from Adobe Acrobat In order to ensure that imposition (Layout not equal Off in the Layout panel) works correctly, you must instruct Acrobat to generate page independent code. In Acrobats Print dialog, select Advanced. This opens the Advanced Print Setup dialog. Select PostScript Options. Set Font and Resource Policy to Send for Each Page.
This will let Acrobat create page independent code suitable for imposition.

24 Windows Printing

Printing from Quark XPress In order to ensure that imposition and other driver functions work correctly, you must instruct XPress to use the bizhub PRO 1050 PPD and the correct page size. In the XPress Print dialog, select the Setup panel.
In the Setup panel, select the bizhub PRO 1050 PPD as Printer Description. The paper size will be shown as custom. Select the document size to be output by XPress (if necessary including registration marks) as Paper Size.
This will let XPress output consistent settings suitable for imposition and other driver functions.

Windows Printing 25

Setting features without the plug-in The Advanced dialog shows a number of Printer Features, e.g. finishing options. For most applications, these features are disabled because the printer driver plug-in is running. In this case, use the printer driver plug-in (see next section) to set the desired printing options. Some applications do not support the printer driver plug-in because they provide their own printer driver. Without the plug-in, the Printer Features will be enabled. In this case, open the Advanced dialog and select the desired printing options from Printer Features. To select a print feature, click on the field right of the feature name and select the desired value from the pop-up menu. Note: Some features of the plug-in, like gutter or user authentication can be set only in the plug-in, but not in the Advanced dialog due to restrictions of the PPD format. (The PPD format does not support features with arbitrary string or numeric values.)

26 Windows Printing

Printer Driver Plug-in
The printer driver plug-in provides a graphical user interface to select printing and finishing options. To open the printer driver plug-in, select File Print, then select Properties, then select the bizhub PRO 1050 tab sheet. This will show the plug-in.

Windows Printing 29

Layout
The Layout panel allows you to define how document pages are mapped on printed sheets and to select finishing options. The selections for stapling, punching, and folding will only be available if the corresponding installable options are activated, see section Installable Options. You can set the following attributes: 1. Layout (imposition) defines how document pages are mapped on printed sheets. Off one document page is one printed sheet.
Adhesive Binding document pages are arranged on the sheets to produce center folded booklets sets of 4 pages each. I.e. pages 1-4 are printed on sheet 1, pages 5-8 on sheet 2. After folding, the sheets can be put side by side and glued to form a booklet. Document pages are printed in original size. The sheet size is twice the document page size. Booklet document pages are arranged on the sheets to produce a center folded and saddle stitched booklet. Document pages are printed in original size. The sheet size is twice the document page size. Normally booklet is combined with half folding and center stapling. This implies that the paper in the tray must be short edge fed. Long edge fed paper will not work.

30 Windows Printing

The maximum number of sheets/pages allowed for a booklet with folding depends on the paper weight: 50-91 g/m 92-130 g/m 131-161 g/m 162-209 g/m 210-244 g/m 50 sheets 20 sheets 15 sheets 10 sheets 5 sheets 200 pages 80 pages 60 pages 40 pages 20 pages
If the allowed number of sheets is exceeded, the booklet will not be folded. Note for Macintosh users: Do not use the Booklet option in the Page Setup dialog, but only the one in the printer driver plugin. 2 in document pages are arranged side by side on each sheet. I.e. sheet 1 contains pages 1+2, sheet 2 (or the back page of sheet 1) contains pages 3+4. The sheet size is twice the document page size. Document pages are printed in original size. The sheet size is twice the document page size. 2 Repeat 2 copies of a document page are arranged side by side on each sheet. I.e. sheet 1 contains 2 copies of page 1, sheet 2 (or the back page of sheet 1) contains 2 copies of page 2. The resulting paper pile can be center cut to obtain twice the number of copies. 2 Repeat can be used, e.g. to print A5 documents on A4 paper or Statement documents on Letter paper and double the number of copies. 2 Repeat Reverse Like 2 Repeat, 2 copies of a document page are arranged side by side on each sheet such that the resulting paper pile can be center cut to obtain twice the number of copies. However, the second page is rotated by 180 such that the side to be cut is the same for both pages. The arrangement of the pages is determined by the Binding setting. The binding side (left, right for portrait pages, top, bottom for landscape pages) indicates which side is designated for binding (opposite the cut side). 2. 3. 4. Double Sided (duplex) document pages are rendered for printing on both sides of a sheet. Binding selects the processing side (left, right, top) for several other options. See Layout, Duplex, Staple, Punch. Staple selects the staple mode: Off, 1 staple (left/right at the corner), 2 staples (at the side)

Binding side left or right determines also the staple position. 5. Punch selects the punch mode: Off, 2 holes, 3 holes / 4 holes
The punch side (left, right, top) is determined by Binding. The availability of 3 or 4 holes depends on the installed punch unit. See Installable Options about how to configure the punch unit. The staple and punch options are applied across the feeding direction (to the edge of the paper which leaves the copier last). Therefore they restrict the orientation of the paper in the tray. E.g.,

Windows Printing 31

for an A4 or Letter portrait page with side stapling, you must have A4 or Letter, long edge fed paper in the selected tray, short edge fed paper will not work. 6. Fold selects the folding mode:

Half Fold (in/out)

Z-Fold (A3, B4, 11x17)

Z-Fold (8x14)

Center Staple and Fold
Center Staple and Fold, Trim

Letter Fold (in/out)

Zigzag Fold (in/out)
Double Parallel Fold (in/out) Gate Fold (in/out)
Multi-Letter Fold (in/out)
Multi Half Fold The In checkbox determines whether the printed side (first page) of the paper is folded to the inside or to the outside. Folding requires that the paper is short edge fed. Z folding is typically applied with mixed paper sizes where one size is twice as big as the other (e.g., A3 and A4 or Tabloid and Letter). In this case, the bigger paper is short edge fed and Z folded to match the size and orientation of the smaller paper. 7. Group selects if documents are output sorted or grouped: Sort (unchecked): 3 copies of a 3 page document are output as 1-2-3, 1-2-3, 1-2-3. Group (checked): 3 copies of a 3 page document are output as 1-1-1, 2-2-2, 3-3-3.
Do not use the Collate option of the main printer driver dialog to select sort/group.

32 Windows Printing

Offset selects if copies are offset in the output tray for easy separation. Note: Offset is performed per set, i.e. for multiple copies of a multi page job, offset is performed after each copy. N to 1 outputs the pages in reverse order. N to 1 is applied after imposition has been performed. See also Page order in section Print Properties. N to 1 is not allowed with Center Staple and Fold, Trim or with Face up.

Windows Printing 39

Note: Front cover sheet and insert before page 1 (see section Trays) cannot be selected together. Only one sheet can be inserted before page 1. Note: A blank cover sheet can be drawn from the Post Inserter. However, with Multi Letter Fold Out, only front cover can be selected, and with Multi Letter Fold In, only back cover can be selected.

40 Windows Printing

The Trays panel allows you to select trays for each page of the job individually. It can be used to print chapter separation sheets on special paper, or to print a whole chapter on special paper. The Trays panel also allows you to enter page numbers and texts for tab sheets. The general settings for tab sheet printing (number of tabs, font etc.) can be entered in the Tab Settings panel. Finally the Trays panel allows you to configure the output tray. The tray to be used for the job as a whole is selected by Paper source in the Properties panel of the Print dialog. This selection can be augmented by the selection in the Trays panel. Each line entered under Per Page Settings specifies that the settings selected in this row shall be applied to the given page numbers. Pages must be entered as a comma separated list of individual page numbers, or of page ranges where the lower and upper bounds are separated by a dash. Pages count from 1 and refer to the pages included in the job. If your document contains Roman numbering, or if you print only one chapter of a book, the page numbering in the job may deviate from the page numbering in your document. If duplex printing is selected for the job or for a set of pages, each individual page and each start of a page range are forced on a new sheet. E.g., if the job shall be printed duplex on tray 1, and page 18-25 on tray 3, then pages 1-17 will be printed from tray 1, page 17 will have an empty back page, and pages 18-25 will be printed starting on a new sheet from tray 3. Note: Page numbers are applied after imposition, e.g. for a 2in1 imposition, you should divide the page numbers by two.

Windows Printing 41

Type allows you to select the following settings for the selected pages: Same as Body job setting Insert Blank Sheet an empty sheet shall be inserted after the selected pages. If duplex printing is requested, the selected page is forced on a new sheet if necessary. E.g., if the job shall be printed duplex, and a page inserted after page 7, then page 7 will have an empty back page, and page 8 will be on a new sheet, after the inserted sheet. Print Single Sided simplex printing (possibly different from the job setting) Print Double Sided duplex printing (possibly different from the job setting)
The tray selected under Source specifies that the given pages shall be drawn from this tray. In the above example, page 18 to 25 and 27 to 29 are printed on paper fed from tray 3 and page 37 is printed on paper fed from tray 2. Hole-Punch and Staple allow to select punching and stapling different from the job setting. Finish Staple determines that the set to be stapled ends with the specified page. If the following pages are still to be stapled, they will form a new set.

42 Windows Printing

Use Tab Paper determines that a tab sheet shall be printed for the specified page with the given tab text. If a tab sheet is printed, Type indicates if an extra sheet is inserted: Insert Blank Sheet inserts a sheet containing only the tab text before the selected page. Print Single Sided create a tab sheet containing the content of the selected page and the tab text.
Tab sheets are always printed single sided. Tab sheets can have A4 Tab or Letter Tab size. If they are combined with normal A4 or Letter pages, they must of course be drawn from a different tray. Note: Due to technical reasons, blank pages without tab are inserted after the specified page. To insert a blank sheet before the first page of the job, use the Cover function in the Cover panel. On the other hand, blank pages with tab are inserted before the specified page. This allows to insert a blank tab sheet before the first page of the job directly. The tab number indicator behind the text shows on which tab the selected text will be printed. E.g. in the above screenshot, page 1 will be printed on tab 1 of a set of 5, and page 41 will be printed on tab 2 of a set of 5. By default, the tab number is adjusted automatically to achieve a natural ordering of the tab sheets. This is indicated by an asterisk behind the set size. If you want to print incomplete tab sets, e.g. start with sheet 3 of a set of 5, select the tab number of the first tab explicitly, e.g. 3/5. To revert to automatic ordering, select Continue. More tab settings can be entered in the Tab Settings panel, see section Tab Sheets.

Windows Printing 43

Output Tray determines the output tray to be used. The choices available for the output tray depend on the finishing options selected in the Layout panel. Pile permission determines if several jobs can be piled in the stacker. If it is off, the current job must be removed before the next job can be printed to the stacker. Chapter determines together with duplex printing that each page listed should be printed on a front page. E.g. the above screenshot indicates that pages 4, 7, 8, 9 shall be printed on a front page.

44 Windows Printing

Tab Sheets
The Tab Sheets panel allows to configure general settings for tab sheet printing. The texts and page numbers for each tab are entered in the Trays panel, see section Trays. Papersize determines the paper size for the tab sheets. It can be A4 Tab or Letter Tab, corresponding to A4 or Letter paper size for the job. If Z folding is enabled, job pages may also have A3 or Tabloid size. Number of Tabs specifies how many tabs make a set of tab sheets. Together with Space above, Space below, and Gap, it allows to position the tab texts on each sheet. Font Name, Bold, Italic and Size determine the font for the tab text. Orientation determines the text orientation and direction on the tab. It can be Normal (downwards), Flipped (upwards), Horizontal, or Vertical. The tab preview window shows the orientation visually. Tab Position determines if the tab text is aligned at the top, center, or bottom of the tab. Text Position allows to move the tab text horizontally. By default, the visual center of the tab text is aligned with the horizontal center of the tab. The tab preview window shows a preview of each tab text which has a page number assigned. This allows you to check if the tab text fits into the tab. To select a tab, click on the desired tab in the page preview window. To step (step backwards) through the tabs, click (shift-click) repeatedly on the tab in the tab preview window. To actually print on tab sheets, put the set of tab sheets into the selected tray with long edge feed orientation, face down, first page on top, tabs to the left. (Note that this is reverse order.) Make sure the job pages (A4 for A4 Tab, Letter for Letter Tab) are also in long edge feed orientation. Note: Tab Sheet printing is not supported with imposition (Layout not equal Off).

Windows Printing 45

Screening
The Screening panel allows you to control the screen (raster) settings. Screen settings are applied to all elements on the page (text, graphics, and images). You can set the following attributes: 1. Halftonimg sets the screen frequency. The freqency is measured in lpi (lines per inch). Higher values yield a finer raster, but allow less grey levels to be distinguished. Screen angle sets the screen angle. In general it is good to print monochrome pages at an angle of 45. Print density selects the toner density to be applied by the copier: 4. Light 1, , Light 5, Normal, Dark
Smoothing selects the image smoothing to be applied by the copier: Off, Type 1, Type 2, Type 3
Notes: Off - no smoothing. Type 1 is suitable for printing the diagonal lines of general characters and graphics. Type 2 is suitable for printing the curved sections of general characters. Type 3 is suitable for printing the curved sections of ornamental characters and fine lines.

46 Windows Printing

The Forms panel allows you to apply forms. Forms are stored as rendered bitmaps on your bizhub PRO 1050. They can be appended behind, prepended in front of, or used as overlay for subsequent jobs. The forms preview allows to check a form visually before printing with it. Forms can be created using the Output Method function in the Workflow panel, see section Workflow. When the Forms panel is opened and a printer is connected, the plug-in obtains the forms list from the printer and shows it. The forms list is required for all other functions in the Forms panel. To update the forms list, select another panel and then the Forms panel again. After the plug-in has obtained the forms list, select a form to show its preview and enable the other forms functions. To step through the pages of a multi page form, click on the forward/back buttons beside the preview. Copy to Clipboard copies the currently shown page of the form in screen resolution into the clipboard. You can paste it into your document to align the contents of your document with the form. Before actually printing, you should of course remove the screen resolution copy from your document. Note: If you paste the forms preview into MS Word, make sure to paste it into a text field which is positioned at (0,0) from the page, which has all margins 0 and whose size is equal to the page size. This is to ensure that the forms preview is kept in full size and not wrongly scaled down. Prepend/Append determine that the pages of the selected form are prepended in front of the current job or appended behind the current job. Overlay Once determines that all pages of the form are overlaid once on the current job, starting from page 1. E.g. Overlay Once for a 4 page form on an 8 page job means that the form pages are overlaid on pages 1 to 4 of the job.

52 Windows Printing

is printed in your presence. The job will be put into a list of private jobs and only be printed after you release it on the copier panel by entering the user id and password. The secure print id and the password must both consist of 1 - 8 alphanumeric characters. You may choose them yourself. To enter the secure print id and the password, select Autoprint Secure Print, click into the Secure Print ID field, enter the id, hit TAB to move to the Password field, enter the password, hit TAB to move to the Password confirmation field, enter the password again. While your input is invalid or not yet complete, the id and password fields will be shown with red background. Secure printing does not block other jobs. 5. User authentication encloses your user name and password with your job. This identification will be used to determine your printing rights. You must supply a user name and password if user authentication is enabled by the administrator of the bizhub PRO 1050. If you do not supply user name and password, you will be considered as a public user who may have no or only restricted rights to print. The user name must consist of 4 - 64 alphanumeric characters. The password must consist of 1 - 64 alphanumeric characters. User accounts are configured by the administrator of the bizhub PRO 1050. To enter the user name and the password, check User authentication, click into the User name field, enter the user name, hit TAB to move to the Password field, enter the password, hit TAB to move to the Password confirmation field, enter the password again. While your input is invalid or not yet complete, the user name and password fields will be shown with red background. Note: To work as public user, do not enter a user name like PUBLIC. The public user is identified by no user name. 6. Account Track encloses a department name and/or password with your job. This identification will be used for tracking copying volume. You must supply a department name and/or password if volume tracking is enabled by the administrator of the bizhub PRO 1050. The department name must consist of up to 8 alphanumeric characters. The password must consist of 1 - 8 alphanumeric characters. An empty department name means the department is identified by the password. Department accounts are configured by the administrator of the bizhub PRO 1050. To enter the department name and the password, check Volume track settings, click into the Department name field, enter the department name, hit TAB to move to the Password field, enter the password, hit TAB to move to the Password confirmation field, enter the password again. While your input is invalid or not yet complete, the password fields will be shown with red background.

Windows Printing 53

Output method allows you to select that your job is stored in a box for later reprinting. A box is a container at the copier which is created by the administrator. Print is the default and means normal printing. Save in user box stores the job in the specified box without printing it. Save in user box and print stores the job in the specified box and prints it. Forms allows you to create a form in the Forms panel.
To store a job in a box, select Output method Save in user box (and print), click into the User box number field, enter the box number, hit TAB to move to the Filename field, and enter the filename. An empty box number indicates the public box which is accessible without user authentication. Other box numbers are assigned to user accounts and you must authenticate by your user name and password to access them. Each box number is accessible only to one registered user. A job in a box is identified by box number and filename. This means when you store a job with a box number and filename which are already present, you will overwrite the old job. Note: The identification and password settings for secure printing, user authentication, volume tracking, and box number are not cleared when you click Restore defaults. To clear them, enter other values manually.

54 Windows Printing

Installing the Printer Driver Software
The bizhub PRO 1050 client software is delivered on a hybrid Windows and Macintosh CD-ROM. The CD-ROM contains one folder for each supported language. For each language it contains drivers for MacOS 9 and MacOS X.
Open the folder of your choice.
The MacOS X printer driver comes as an installer package containing the software for all languages. The printer driver software consists of a PPD which defines printer properties, a printer driver plug-in which provides advanced printing functions under a graphical user interface, and a CUPS filter which injects PostScript code generated by the plug-in. Double click the bizhub PRO 1050 package icon to install the bizhub PRO 1050 software. Follow the instructions given by the Installer.

MacOS X Installation 59

Before you can print a document, you must determine its size and orientation. Usually, the size and orientation of a newly created document are determined as A4 or Letter and portrait. To determine the document page size and orientation, select File Page Setup.
In the resulting dialog, behind Format for, select KONICA MINOLTA 1050 PS (Plug-in) as your current printer, then select the size and orientation for your document. The paper sizes of the bizhub PRO 1050 are described in appendix Paper Sizes. Note: The document page size as defined in Page Setup may be different from the output paper size on which you print. E.g. if you print using booklet layout, the output paper size will be twice the document page size. The output paper size can be selected in the Print dialog. Orientation may be portrait, landscape rotated left, or landscape rotated right. Left and right rotation makes a difference e.g. if you create documents with mixed A4 portrait and A3 landscape or mixed Letter portrait and Tabloid landscape pages. In order to obtain the same handling as for the Windows version of the bizhub PRO 1050 driver, select left rotation.

60 MacOS X Printing

MacOS X allows you to define multiple named custom page sizes. To define a custom page size, select File Page Setup. In the Page Setup dialog, behind Settings, select Custom Paper Size. This will show the Custom Paper Size dialog:
Click New to create a new custom paper size. Enter the name, the size, and the margins for the custom paper size. To save your settings, click Save or OK. The newly defined paper size will appear in the list of paper sizes for all printers.

MacOS X Printing 61

After a document has been created in an application, it can be printed on a bizhub PRO 1050. Printing the document is initiated in the Print dialog, which calls the printer driver to generate a PostScript data stream, the job. The data stream represents the elements on the document pages. It is amended by detailed instructions for processing, the job ticket. The job ticket contains information like page size and orientation, number of copies, tray selection, imposition and finishing modes. To print a document, select File Print.
The popup labeled Printer allows you to select the printer which corresponds to the target bizhub PRO 1050. The popup labeled Presets allows you to save and load your own named combinations of settings. To save the current settings, select Save as and enter a name for them. After this, the saved settings can be selected by this name from the popup. The unlabeled third popup allows you to select a panel of the Print dialog, including the panels of the printer driver plug-in. In the Copies and Pages panel, you can select the following options: The range of pages to be printed The number of copies to be printed

82 Appendix

The following paper sizes support full bleed printing: Wide paper sizes, custom paper sizes, Tab sizes (A4 Tab, Letter Tab)
Note: Although the maximal document page size and the maximal output paper size are both 324 x 460 mm (12.75 x 18.11 inch), the maximal printing area of the engine is 314 x 460 mm (12.36 x 18.11 inch). If the width of the output paper size exceeds 314 mm (12.36 inch), the output page will be clipped or scaled correspondingly (default = clip), depending on the setting of Fit, see section Paper.

Appendix 83

End User License Agreement
PLEASE READ CAREFULLY THE LICENSE AGREEMENT BELOW BEFORE INSTALLING THIS SOFTWARE. INSTALLING THIS SOFTWARE SHALL BE DEEMED YOUR LAWFUL ACCEPTANCE OF THE TERMS AND CONDITIONS BELOW. IF YOU DO NOT AGREE TO THEM, YOU MAY NOT INSTALL THE SOFTWARE. 1. COPYRIGHT AND INTELLECTUAL PROPERTY RIGHTS This is a license agreement and not an agreement for sale. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. or its affiliate company (hereinafter collectively KONICA MINOLTA) owns, or has been licensed by other owners (KONICA MINOLTAs Licensor), copyrights and other intellectual property rights of the Software, and any and all rights and title to the Software and any copy made from it are retained by KONICA MINOLTA or KONICA MINOLTAs Licensor. In no event shall this agreement be deemed to assign any copyright and/or any intellectual property rights of the Software from KONICA MINOLTA or KONICA MINOLTAs Licensor to you. The Software is protected by copyright laws and international treaty provisions. 2. LICENSE KONICA MINOLTA hereby grant to you a non-exclusive, non-transferable and limited license, and you may: (1) install the Software on computer(s) under control of you solely for the purpose of using the Software with the KONICA MINOLTA product KONICA MINOLTA bizhub PRO 1050 or KONICA MINOLTA bizhub PRO 1050P ; (2) use the Software solely for your own customary business or personal purposes; and (3) make a single copy of the Software for backup purpose. 3. RESTRICTIONS (1) You shall not without the written consent of KONICA MINOLTA: (i) use, copy, modify, merge or transfer copies of the Software except as provided herein; (ii) reverse engineer, reverse assemble, reverse compile or in any other way analyze the Software; or (iii) sublicense, rent, lease or distribute the Software or any copy thereof. (2) You agree that you will not export the Software in any form in violation of any applicable laws and regulations regarding export control of any countries. 4. TRANSFER You may permanently transfer the Software provided the recipient agrees to accept the terms and conditions of this Agreement. If you transfer the Software, you must transfer all computer programs and documentation and erase any copies residing on computer equipment. Transfer of the Software terminates your license and all associated benefits under this Agreement 5. DISCLAIMER OF WARANTIES KONICA MINOLTA OR KONICA MINOLTAS LICENSOR WARRANTS THE MEDIA ON WHICH THE SOFTWARE IS FURNISHED TO BE FREE OF DEFECTS IN MATERIAL AND WORKMANSHIP UNDER NORMAL USE, FOR A PERIOD OF NINETY (90) DAYS FOLLOWING THE DATE OF YOUR

84 Appendix

PURCHASE. THE SOFTWARE IS PROVIDED TO YOU AS IS AND KONICA MINOLTA OR KONICA MINOLTAS LICENSOR DISCLAIMS ALL OTHER WARRANTIES WITH REGARD TO THE SOFTWARE, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SOME STATES OR COUNTRIES DO NOT ALLOW THE ABOVE LIMITATIONS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU IN SUCH STATE OR COUNTRY. 6. LIMITATION OF LIABILITY IN NO EVENT SHALL KONICA MINOLTA BE LIABLE FOR ANY LOST PROFITS, LOST DATA, OR ANY OTHER INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM USE OR INABILITY TO USE THE SOFTWARE, EVEN IF KONICA MINOLTA OR KONICA MINOLTAS LISENSOR HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR FOR ANY CLAIM BY YOU BASED ON A THIRD PARTY CLAIM. IN NO EVENT SHALL KONICA MINOLTAS LIABILITY TO YOU, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, EXCEED THE FEES PAID BY YOU FOR THE SOFTWARE. SOME STATES OR COUNTRIES DO NOT ALLOW EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT IN FULL APPLY TO YOU IN SUCH STATE OR COUNTRY. 7. EXPORT RESTRICTIONS You may not export the Software in any form in violation of any applicable laws or regulations regarding export control of any countries. 8. TERMINATION You may terminate this license at any time by destroying the Software and all your copies of it. KONICA MINOLTA may terminate your license if you fail to comply with any terms of this Agreement. Upon such termination, you must immediately destroy all copies of the Software in your possession. 9. SEVERABILITY If any provisions of this Agreement are held by a court of competent jurisdiction to be illegal or invalid, the remainder of these provisions hereof shall remain effect. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT, UNDERSTAND IT, AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS.

Appendix 85

Term/Abbreviation Bitmap Booklet CUPS Document page size DNS dpi Finishing Imposition IP address
Explanation Image data produced for output on the copier. Layout of the pages of a document on the printed sheets such that the result can be center folded and then read as a booklet. Common Unix Printing System The page size used by applications to place objects. Domain name server a network device mapping network names on IP addresses. Dots per inch measuring unit for copier resolution. Post printing operations, e.g. stapling, punching, folding. Instructions on how the pages of a job are laid out on the printed sheets, e.g. duplex or booklet. A unique number used to identify a network device (e.g. server, workstation, printer) in a network. An IP number consists of 4 integers between 0 and 255 (eight bits), e.g. 128.3.3.21. IP numbers may be valid world wide or only in the local network. Document in print ready format plus job ticket. Instructions for printer specific handling of a job, e.g. for imposition. Long edge feed paper orientation where the paper is fed with its long edge into the copier. The paper appears portrait if you stand in front of the copier. Lines per inch measuring unit for raster frequency. A network protocol for printing. A network protocol used in Windows environments for printing and file sharing. The size of the paper on which the job is printed. The person or user account who submitted the job. 1. document page (in the application) 2. printed page (on paper) In duplex printing, two pages are printed on (both surfaces of) one sheet. In booklet printing, two document pages are mapped on one printed page, and 4 document pages make up one sheet.

Job Job ticket LEF

lpi lpr NetBIOS Output paper size Owner Page

PostScript

Page description language (PDL) with a rich feature set for mapping text, graphics and images on raster devices like printers and film recorders.

86 Glossary

Term/Abbreviation PPD
Explanation PostScript Printer Description. A file on the workstation which specifies printer capabilities and how the printer driver can map them on printer commands. The document page size after imposition. If imposition is not Off, print page size is twice the document page size. Short edge feed paper orientation where the paper is fed with its short edge into the copier. The paper appears landscape if you stand in front of the copier. Sheet of printed paper. In duplex printing, two pages are printed on one sheet. In booklet printing, 2 document pages are mapped on one printed page and 4 document pages are printed on one sheet. A network protocol used for communication in local area networks and the internet.

Print page size SEF

TCP/IP

Glossary 87

www.konicaminolta.com
Copyright 2005 SOFHA GmbH, Germany 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
2005.12 1050_prt_sf_ug_eng_v210