4980-7765-02

User Manual
Di1610 / Di1610f Twain Driver

Contents

3 Setting Up PC Scanning Connecting to the USB Port Installing the TWAIN Driver
3.1 Installing the TWAIN Driver Using Plug and Play..3-1 Installing the TWAIN Driver Using Plug and Play Under Windows XP..3-1 Installing the TWAIN Driver Using Plug and Play Under Windows 2000..3-3 Installing the TWAIN Driver Using Plug and Play Under Windows Me/98 SE..3-4

How to Scan Document

4.1 4.2 Using the Auto Document Feeder..4-1 Using the Original Glass..4-2

Common Settings

5.1 5.2 Auto Options...5-1 Manual Options....5-3

Error Message

6.1 Original Document Jam...6-1 To clear a misfeed in the Auto Document Feeder..6-2 Memory Full...6-3 Communication Error...6-3 Scanner Busy....6-4 Read Data Error...6-4

Di1610/Di1610f

Setting Up PC Scanning
If the enclosed TWAIN Driver is installed on the computer, this copier can be used for to scan documents to a PC. The following software and hardware system environment is required for PC scanning.
OS: Windows 98 SE, Windows Me, Windows 2000, or Windows XP TWAIN-compatible image-processing software (such as, Adobe Photoshop) USB V.1.1 (or later version)
Connecting to the USB Port
Important! Be sure to use a shielded USB cable. Use of an unshielded cable may result in radio interference.
1 Make sure that the copier and the computer to be connected to the

copier are turned OFF.

2 Connect one end of the USB cable to the USB port of the copier.

Connect

Copier
This completes the connection.
Note USB1.1 is only supported on Windows 98 SE, Windows Me, Windows 2000, and Windows XP.
Installing the TWAIN Driver
This section describes the procedure for installing the TWAIN driver. The printer driver can be installed by using Plug and Play.
Installing the TWAIN Driver Using Plug and Play
Installing the TWAIN Driver Using Plug and Play Under Windows XP
1 With Windows running, insert the CD-ROM into your computers CDROM drive.
2 Turn on the copier. 3 When the copier is ready, connect it to the computer with the USB cable.
The Found New Hardware Wizard dialog box appears.
4 Select Install from a list or specific location [Advanced], and then

click [Next].

5 Select Include this location in the search: under Search for the
best driver in these locations., and then click [Browse].
6 Browse to Driver\(language)\WinXP on the CD-ROM, and then click
Tip Select the language you prefer. For example, if you prefer English, browse to: Driver\English\WinXP

7 Click [Next].

The following dialog appears, click [Continue Anyway].
8 The Completing the Found New Hardware Wizard dialog box appears.

Click [Finish].

9 The Found New Hardware Wizard dialog box appears again.
Repeat steps 4 through 7.
Note This completes the installation of the TWAIN driver.
Installing the TWAIN Driver Installing the TWAIN Driver Using Plug and Play Under Windows 2000
2 Turn on the copier. 3 When the copier is ready, connect it to the computer with the USB cable. The Found New Hardware Wizard dialog box appears.
4 Select Search for a suitable driver for my device (recommended)
in the Install Hardware Device Drivers dialog box, and then click [Next]. The Locate Driver Files dialog box appears.
5 Select Specify a location, and click [Next]. 6 Click [Browse.] on the next dialog box, browse to
Driver\(language)\Win2000 on the CD-ROM, and then click [OK].
Tip Select the language you prefer. For example, if you prefer English, browse to: Driver\English\Win2000
7 Click [OK], and follow the instructions that appear on the screen until
the Completing the Found New Hardware Wizard dialog box appears.
8 The Found New Hardware Wizard dialog box appears again.
Installing the TWAIN Driver Installing the TWAIN Driver Using Plug and Play Under Windows Me/ 98 SE
The Add New Hardware Wizard dialog box appears.
4 Click [Next], and then select Search for the best driver for your device (Recommended) on the next dialog box.

Click [Next] again.

5 Select [Specify a location], and then click [Browse]. 6 Browse to Driver\(language)\Win9x on the CD-ROM, and then click
Tip Select the language you prefer. For example, if you prefer English, browse to: Driver\English\Win9x
7 Click [Next], and then follow the instructions that appear on the screen
until you can click [Finish].
8 The Add New Hardware Wizard dialog box appears again.
Note Repeat steps 4 through 7 until the installation is completely finished. This completes the installation of the TWAIN driver.

Using the Auto Document Feeder
Note The Auto Document Feeder (ADF) cannot be used when True Color or Gray (dpi) is selected for Scan Type.
1 Select the PC software program (Imaging, Photoshop, etc.). This procedure uses Microsoft Imaging as an example.
2 Click [File]. 3 Click [Select Device.]. 4 Choose Minolta Di1610 or Minolta Di1610f from the dialog box,

then click [OK].

5 Click [Acquire Image.], then adjust any settings necessary.
See Common Settings on page 5-1.
6 Place the document face up
on the Auto Document Feeder (ADF).
7 Click [Scan] to begin scanning.
4.2 Using the Original Glass
2 Click [File]. 3 Click [Select Device]. 4 Choose Minolta Di1610 or Minolta Di1610f from the dialog box,
6 Place the document face
down on the Original Glass.
Align the document with the scale marks across the top and to the left of the Original Glass.

Auto Options

No. 1 2
Items Original Size Scan Type
Settings A4, B5, A5, FLS, Legal, Letter, Half Letter, 16K, Custom See Original Size: on page 5-2. B/W (default setting), Photo, Gray, True Color See Scan Type: on page 5-2. * True color mode is only available for scanning through Original Glass. 150dpi 150dpi, 300dpi 300dpi (default setting), 600dpi 600dpi See Resolution: on page 5-2. Auto (default setting), Manual Shows the prescanned image. Prescan an image. * This function is only available for scanning through Original Glass. See the [Help] file. Scan an image. See version information. Close scanner dialog.

Resolution

Scanning mode Over View Window Prescan

Help Scan About Close

Original Size:
Select the Original Size from the pull-down list to match the size of document to be scanned.
Scan Type: The Scan Type pull-down list contain four options.

G G G G

B/W: Suitable for most text documents. Photo: Suitable for photographs. Gray: Suitable for scanning black & white photographs and text documents. True Color: Suitable for very detailed color images.
Resolution: The Resolution pull-down list contain three options that can be used for different purposes.
150dpi 150dpi: Normal resolution for text documents containing standard sized text. 300dpi 300dpi: Higher resolution for text documents containing small characters or fine print, such as a newspaper article. This is default setting. 600dpi 600dpi: Highest resolution for scanning photographs and other images.

Manual Options

To enter the enhanced settings, select Manual in the Scanning mode.

No. 5 6

Items Rotation Default Brightness/Contrast Sharp Curve Level
Settings None (default setting), Right 90, Left 90 Click [Default] to restore all the enhanced settings to their default values. -100 to 100% -2 to 3 See Sharp: on page 5-4. Value input from -100 to 100 See Curves: on page 5-4. Input Levels: Minimum: 0 to 247 Gamma: 0.10 to 9.99 Maximum: 8 to 255 Output Levels: Minimum: 0 to 247 Maximum: 8 to 255 Note: The difference between Maximum and Minimum cannot be smaller than 8. See Level: on page 5-4.

Color Balance Hue/Saturation
-100 to 100 See Color Balance: on page 5-4. Hue: -180 to 180 Saturation: -100 to 100 Lightness: -100 to 100 See Hue/Saturation: on page 5-4.

Sharp:

This function is used to sharpen the image or blur it for effect.
Curves: This function is used to set the gamma of the image. This function will allow you to brighten or darken the overview of the image without changing the original resolution. There are three input controls available.
The scroll bar The editing field Directly dragging the points of the folded or curved lines
Level: This function is used to set the gamma value, increase shadow and highlight areas, enhance shadow values and reduce highlight values.
Color Balance: This function is used to fine-tune the RGB values in shadows, midtones, and highlights areas. There are three setting options.
Cyan-Red Magenta-Green Yellow-Blue
Hue/Saturation: This function is used to set hue and saturation as well as the lightness of the image. Hue can be set within the range -180 to 180. Saturation can be used to adjust the freshness of colors by setting the range from -100 to 100. Lightness can be set from -100 to 100.

Original Document Jam

Message on the Control Panel:
Cause A paper misfeed occurred in the Auto Document Feeder. All misfed paper was not removed from the Auto Document Feeder.
Remedy Open the Document Feeder Cover and the Auto Document Feeder, and then remove the misfed paper.
To clear a misfeed in the Auto Document Feeder
1 Remove the original document from the Document Feed Tray.
2 Open the Document Feeder
Cover and gently remove the misfed paper.

3 Open the Auto Document

Feeder and gently remove the misfed paper.
4 Close the Document Feeder
Cover, then load the document removed in step 1 into the Auto Document Feeder again.
Error Message Memory Full Message on the Control Panel:
Cause There is not enough memory.
Remedy Press any key from Control Panel of the copier.
Communication Error Message on the PC screen:
Cause PC or copier system crash during communication. USB cable does not connect properly during communication.
Remedy 1. Turn the copier OFF, then check if the USB cable is connected properly or not. 2. After checking the USB cable carefully, turn the copier ON again. 3. If you still cannot fix the problem, call your service representative.

Scanner Busy Message on the PC screen:
Cause If TWAIN scanning and copy jobs are being performed at the same the time, the copier may stop in the middle of scanning.
Remedy Wait until Copy or all scanning is over.
Read Data Error Message on the PC screen:
Cause An error occurred while reading data from the copier while scanning.
Copyright 2003 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC.
The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers.

2003. 12

KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. Marunouchi Center Building 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan