Max. Current Consumption (full system) Inch area Di351, Di251 11.5 A Di200 10.5 A

POWER REQUIREMENTS

120 to 127 VAC, 50/60 Hz
ENVIRONMENTAL CONDITIONS Temperature Humidity Ambient Illumination Levelness 10 to 32 C with a fluctuation of 10 C or less per hour 15 to 85 % RH with a fluctuation of 10 % RH or less per hour 3,000 lux or less 1 (1.75 mm/100 mm)

COPIER DIMENSIONS

Di351: W.25, D.27-3/4, H.25-1/2 Di251 W.23-1/2, D.27-3/4, H.25-1/2 Di200 W.23-1/2, D.27-3/4, H.21-1/4

COPIER WEIGHT

Di351 133-1/2 lb Di251 129-1/2 lb Di200 109-1/4 lb
Di200f Di251fDi-351f SPECIFICATIONS
Memory Capacity Specifications 35 CPM Machine: 32 MB, 25 CPM Machine: 32 MB, 20 CPM Machine: 16 MB ECM / Gx 3.85 line/mm, 8 x 7.7 line/mm, 8 x 15.4 line/mm, 16 x 15.4 line/mm G3 / ECM: 33.6 Kbps - 2.4 Kbps G3 / ECM: Image signal - Pass the 2 sec (V.34 JBIG) MH / MR / MMR / JBIG G3 / ECM: Phone line Optional memory board G3 Multi Port TX marker *
Communication mode Scanning resolution (main line x feed line) Data speed Transmission time Coding method Applicable network Options
*: TX marker is unavailable for 2 sided document feeder (ADFR).

List of Functions

Function Speed High speed scanning High speed printout ( : available

: unavailable)

(0.55 sec/Letter Crosswise fine) (35 CPM: 35 ppm/Letter Crosswise) (25 CPM: 25 ppm/Letter Crosswise) (20 CPM: 20 ppm/Letter Crosswise)
ECM mode High speed half tone Resolution Super fine mode Half tone transmission Auto retransmission after error Full automatic exposure control Smoothing Mixed mode (Text + Photo) Operability One-touch dialing
(Pass the 2 sec /Std. document)
(ECM) (Copy/FAX) (FAX function)
(300 destinations) # of abbreviated dialing number
Abbreviated dialing One-touch program dialing
(500 destinations) (30 destinations) # of one-touch dialing number
Auto re-dialing Destination retrieval
List of Functions Continued
Function Utility functions 2-in-1 printout 2-to-1 page transmission TX marker FAX/Phone automatic switch Password communication Multi polling Polling at regular times Non storage transmission Priority transmission Insert destination Automatic pause for PSTN number Power Source saving mode Switch document reading length Report functions Activity report (TX/RX) Transmission report Uncompleted transmission Xreport Serial broadcast report Relay report User account report Abbr. dial# list One-touch dial# list Fax program list Relay group list (with document margins, Result report) (with document margins) (with document margins, Result report) (with document margins, Result report) (ENERGY STAR) (1 m / 4 m) (option) (Ringer count method) ( : available

Function Memory functions Retransmission Document retransmission Reception by memory Transmission post Memory polling transmission confidential transmission confidential print Serial broadcast Relay broadcast Memory full control Quick memory transmission File backup Rotated Rx Selective polling System Configuration Relay transmission Extra telephone (PB forwarding receivable, PSTN port 1 only) Management function per business section Chain dialing Inch/mm conversion PC print Maintenance Self diagnostics (Option) (Memory dump/display, protocol trace, S/W switch list, service call setup Counter per application Adjust touch panel registration. Adjust ADF zoom ratio (main/sub) Adjust BS zoom ratio (main/sub) (FAX independently) (FAX independently) (100 sections, User management) (210 destinations) (F code) (Separate Tx) (F code) (30 destinations) ( : available

(destination changeable)

Di200f/Di251f/Di351f NETWORK APPLICATIONS SPECIFICATIONS
One-Touch Document E-mail (Internet Facsimile Function) Specifications Communication Protocol E-mail transmission: SMTP (IETF RFC821 and RFC822) protocol TCP/IP communication E-mail receipt: POP3 (IETF RFC1725 and RFC1939) protocol, TCP/IP communication Document Size Resolution Data Format Coding Method Applicable Line Letter, Legal, Ledger 200100 dpi, 200200 dpi, 400400 dpi, 600600 dpi E-mail format: MIME, Attached file format: TIFF-F MH, MR, MMR, JBIG Ethernet LAN (100BASE-TX, 10BASE-T connection)
E-mail RX-Fax Distribution Destination Registration F CODE and destination e-mail address are specified in user registration of this product.
One-Touch Network File TX (One-Touch Filing Function) Specifications Communication Protocol TCP/IP communication Document Size Resolution Data Format Coding Method Destination Registration Letter, Legal, Ledger 200100 dpi, 200200 dpi, 400400 dpi, 600600 dpi TIFF-F MH, MR, MMR Registration of IP address of PC: Max. 500 (including 300 for One-Touch key) Storing Folder Specification One directory is specified to the PC. A directory specified from the PC can be created for each data under the directory.
Network File Scanner (IP Scanner) Specifications Communication Protocol TCP/IP communication Document Size Resolution Data Format Coding Method Destination Registration Letter, Legal, Ledger 200200 dpi, 400400 dpi, 600600 dpi TIFF-F MH, MR, MMR Destination registration is not required (An IP address is automatically notified by PC when scan is reserved).: Up to six keys simultaneously. Storing Folder Specification One directory is specified to the PC. A directory specified from the PC can be created for each file under the directory.

MFP Agent Specifications

Communication Protocol TCP/IP, HTTP Data Format Display HTML Operation Status (Copy/Printer/Fax/Internet Fax/Scanner) Device Status (Alarm/Paper Size and Paper Empty/Option Configuration) Registration/View Maintenance Abbreviated Dialing/One-Touch/Index/Bulletin Board/Box List Initial Setting/User Reg./User Total/Total Page/Power Save/ Network Setting/Scan Setting
Operating Environment of Utilities

CPU OS

Pentium 133 MHz or faster Windows Me/Windows 95/Windows 98 Windows 2000/Windows NT4.0

Memory

32 MB or more (64 MB recommended) For Windows 2000, 64 MB or more (128 MB recommended)

HD Capacity

50 MB or more of free space

SYSTEM OPTIONS

17 6,14,5
1. Duplexing Document Feeder AFR-17 2. Automatic Document Feeder AF-9 3. Original Cover Kit OC-3 4. Plug-In Counter 5. Duplex Unit AD-15 (Di351 Standard) 6. Paper Feed Unit PF-118 7. Paper Feed Unit PF-119 (Di351,Di251 Standard) 8. Large Capacity Cabinet PF-117 9. Copy Table
10. Copy Desk 11. Printer Controller Pi3502 12. 8MB/16MB/32 Memory 13. Data Terminal DT-103 14. Finisher FN-109 15. Finisher FN-110 16. Job Tray JS-201 Option Tray JS-100 Not available for the Di200 17. Shift Tray OT-19. Mailbin Finisher FN-504

SPECIFICATIONS

AFR-17
Name Type Duplexing Document Feeder Paper Take-Up: Take-up from top of stack, U-turn feeding Transport: Single-belt transport Turnover: Loop turnover Ejection: Straight ejection Installation Type of Document Mounted on the copier Plain paper:1-Sided mode -- 50 g/m to 110 g/m or 13 to 29 lbs. 2-Sided mode -- 60 g/m to 90 g/m or 16 to 24 lbs. Single Feed mode -- 35 g/m to 200 g/m or 9 to 53 lbs. Detectable Document Sizes Metric Area (Standard) A5 L, A5 C, B5 L, B5 C, A4 L, A4 C, B4 L, A3 L, L, 8-1/413 L Inch Area (Standard) 5-1/28-1/2 C/L, 8-1/211 C/L, 8-1/214L, 1115 L,1117 L Capacity Document Feed Tray: 50 sheets -- 80 g/m or 21 lbs. Document Exit Tray: 50 sheets -- 80 g/m or 21 lbs. Alignment Document Loading Modes Rear Document Edge Guide Face up Mixed Original 1-Sided 2-Sided Single Feed Power Source Power Consumption Dimensions DC 24 V -- supplied from the copier 60 W or less Width 603 mm or 23.7 inches Height 110 mm or 4.33 inches Depth 502 mm or 19.7 inches -- excluding Document Exit Tray Weight Operating Environment 12.0 kg Same as copier
Name Installation Type of Document Detectable Document Sizes Automatic Document Feeder Screwed to the copier Plain paper 5-1/28-1/2L/C, 8-1/211L/C, 8-1/214L, 1117L Capacity 70 sheets max. (50 sheets max when Mix Original Mode): 52.5~81.4 g/m 25 14~22lbs. Alignment Document Loading Document Transport Speed Rear Document Edge Guide Face up 20 sheets/min. (A4C or Letter C) 25 sheets/min. (A4C or Letter C)) 35 sheets/min. (A4C or Letter C)) Modes 1-Sided Original Mixed Original Power Source Power Consumption Dimensions DC24 V, DC5 V (supplied from the copier) 60 W Width Depth Height Weight 21-1/4 19-1/2 3-3/4

13-1/4 lbs

TYPES OF ORIGINALS WHICH SHOULD NOT BE USED
Type of Original Sheets stapled or clipped together Possible Trouble Take-up failure, damaged sheet, defective drive mechanism due to jammed clips. Sheets glued together Sheets folded, torn, or wrinkled Sheets severely curled Take-up failure, damaged sheet Take-up failure, damaged sheet Sheets misfed due to being dog-eared or fed in askew
Type Installation Type of Copy Paper Paper Sizes Switchback and Circulating Duplex Unit Mounted on the right side door of copier Plain paper, recycled paper A5L/C to A3L or 5-1/2 8-1/2L to 11 17L (L: Lengthwise, C: Crosswise) Paper Weight Registration Power Requirements Max. Power Consumption Dimensions 60 to 90 g/m2 or 16 to 24 lbs. Center DC24 V 10 %, DC5 V 5 % (supplied from copier) 21 W Width. Depth Height Weight 2-1/4 16-1/4 10-1/4

4 lbs.

PF-118 PF-119
Name PF-118 (Universal Cassette) PF-119 (Fixed Paper Size Cassette) Type Installation Type of Copy Paper Paper Sizes Add-on paper source unit Mounted beneath Upper Drawer of copier Plain paper, recycled paper B5L/C to A3L or 8-1/2 x 11L/C to 11 x 17L (L: Lengthwise, C: Crosswise) Paper Weight Registration Capacity Power Requirements Max. Power Consumption Dimensions Width. 21 Depth. 22-1/4 Height. 5 Weight Universal Cassette 18-3/4 lbs. Fixed Paper Size Cassette 19 lbs. 60 to 90 g/m2 or 16 to 24 lbs. Center 550 sheets DC24 V 10 %, DC5 V 5 % (supplied from copier) 16.8 W

PF-117

Type Type of Paper Paper Size Front Loading Type LCC Plain paper, recycled paper B5C, A4C, Letter C (L: Lengthwise, C: Crosswise) Paper Weight Registration Paper Capacity Power Requirements Dimensions 60 to 90 g/m2 or 16 to 24 lbs. Center 2,750 sheets (1375 X 2) DC24 V 10 %, DC5 V 5 % (supplied from copier) Width. 21 in Depth. 22-1/4 in Height. 11-1/4 in Weight 37-1/2 lbs.

FN-109

FN-110 JS-100
Multi Staple Finisher (FN-109) Single Staple Finisher (FN-110) Freestanding Non-Sort Non-Sort, Sort, Group Sort Staple, Group Staple Hole Punch (FN-109)

Installation Modes

Copy Medium
Mode Paper Type Plain paper Paper Size Paper Weight Capacity 250 sheets: A4C, 8-1/(80 g/m2, 20 lb) 150 sheets: except A4C, 8-1/(80 g/m2, 20 lb) (Height: up to 36 mm, 1-1/2) Finishing Tray Max. No. of Sheets to be Stapled

Recycled paper

A3L to A6L to 5-1/2 81/2

60 to 90 g/mto 24 lb

Non-Sort Thick paper Transparencies Translucent paper Postcards Envelopes

1st Tray

20 sheets FN-109: 3,000 sheets (A4L, 11 81/2 or smaller: 80 g/m2, 20 lb) 1,500 sheets (B4L, 8-1/or larger: 80 g/m2, 20 lb) FN-110: 1,000 sheets (A4L, 11 81/2 or smaller: 80 g/m2, 20 lb) 500 sheets (B4L, 8-1/or larger: 80 g/m2, 20 lb)

Staple

Recycled paper Plain paper
Recycled paper Hole Punch Plain paper
Registration No. of Holes Power Requirements Power Consumption Dimensions
Center Inch Areas: 3 holes (2 holes is an option); DC24 V (supplied from copier) 63 W Width: 25-3/4 Height: 38-3/4 Depth: 24-1/2

Weight

109 lbs.
Mode Paper Type Plain paper A3L to A6L to 5-1/2 81/2 Paper Size Paper Weight Capacity Finishing Tray Max. No. of Sheets to be Stapled
250 sheets: A4C, 8-1/(80 g/m2, 20 lb) 150 sheets: 60 to 90 g/m2 except A4C, 16 to 24 lb 8-1/(80 g/m2, 20 lb) (Height: up to 1st Tray 36 mm, 1-1/2)

Non-Sort

Thick paper Transparencies Translucent paper Postcards Envelopes
Sort Staple, Group Recycled paper Staple

60 to 90 g/m 16 to 24 lb

Plain paper Hole Punch Recycled paper
PRECAUTIONS FOR INSTALLATION

Installation Site

To ensure safety and utmost performance of the copier, the copier should NOT be used in a place: Where it will be subjected to extremely high or low temperature or humidity. Where it will be subjected to sudden fluctuations in either temperature or humidity. Which is exposed to direct sunlight. Which is in the direct air stream of an air conditioner, heater, or ventilator. Which has poor ventilation or is dusty. Which does not have a stable, level floor or where it will receive undue vibration. Which is near any kind of heating device. Which is near volatile flammables (thinner, gasoline, etc.). Where it may be splashed with water. Which puts the operator in the direct stream of exhaust from the copier. Where ammonia gas might be generated.

Power Source

If any other electrical equipment is sourced from the same power outlet, make sure that the capacity of the outlet is not exceeded. Use a power source with little voltage fluctuation. Never connect by means of a multiple socket any other appliances or machines to the outlet being used for the copier. Ensure that the copier does not ride on the power cord or communication cable of other electrical equipment, and that it does not become wedged into or underneath the mechanism. Make the following checks at frequent intervals: Is the power plug abnormally hot? Are there any cracks or scrapes in the cord? Has the power plug been inserted fully into the outlet? Does something, including the copier itself, ride on the power cord? Use an outlet with a capacity of 120 to 127 VAC, 15 A or more.

SERVICE TRAINING Certification Training Methods Classroom Training Prior Product Training Updated Schedules will be provided on PartnerLink Di250/350/250f/350f trained technicians Di200/251/351/200f/251f/351f Product Comparison Manual, available on PartnerLink through the Professional Development Link Minolta Analog Technicians Introduction to Digital CBT part number 9005-9005-17 Facsimile Basics (paper-based) part number 8909-4887-07 Classroom Training
No Prior Product Training
YIELD PROTECTION PROGRAM The Product and Technical Support Division is pleased to announce a yield protection program for the Imaging Unit and Fusing Unit of the Di251 Series of Digital Copiers (Di200/200f/251/251f/351/351f). Along with the many engineering and serviceability enhancements, the yield protection program will give you the ability to provide very competitive service agreements. Here are the key details of the program: The Di251 Series Yield Protection Program is in effect until March 31, 2002. This program covers Imaging Units with the manufacturing revision of H or higher. See Figure 1 to identify the Imaging Unit manufacturing revision. We will honor this program for the above listed Imaging Units when used in the Di250 Series of Digital Copiers (Di250/250f/350/350f). See the Imaging Unit Interchange Table 3. The amount of credit issued is based on the Pro-Rate Tables 1 and 2 below. The credit is based on the GMAP price of the item. To submit a claim, please follow the procedure outlined below.
Table 1: Fusing Unit Pro-Rate Table:
Model Fusing Unit Part Number Published Yield Di200/200f 4013-0321-02 300,60,000 60,001 120,000 120,001 180,000 180,001 240,000 240,001 300,000 Di251/251f 4012-0321-02 300,60,000 60,001 120,000 120,001 180,000 180,001 240,000 240,001 300,000 Di351/351f 4011-0321-02 300,60,000 60,001 120,000 120,001 180,000 180,001 240,000 240,001 300,000 Credit

Yield Pages

100% 60% 40% 20% 0%
Table 2: Imaging Unit Pro-Rate Table:
Model Imaging Unit Part Number Published Yield Di200/200f 4163-612 62,- 12,000 12,401 - 24,800 24,801 - 37,200 37,201 - 49,600 49,601 - 62,000 Di251/251f 4163-612 74,- 14,800 14,801 - 29,600 29,601 - 44,400 44,401 - 59,200 59,201 - 74,000 Di351/351f 4163-602 80,- 16,000 16,001 - 32,000 32,001 - 48,000 48,001 - 64,000 64,001 - 80,000 Credit
Figure 1: Imaging Unit Identification:

MODEL 4163

L/N I022176H
Table 3: Imaging Unit Interchange Table:
Imaging Unit Part Number 4163-612 4163-602 Di200 ---Di250 Di350 Di250f Di350f Di251 Di351 Di251f Di351f 12 02
IU Model Key 02 = 35cpm 12 =

IU Mfg. Revision

Applicable Models

Imaging Unit Model Key*

* The I/U Model Key must correspond to the actual machine model. Yield Protection Plan Claim Submission: All claims for the Yield Protection Program must be submitted though Minolta PTS Operations following the RA (Return Authorization) Request Procedures outlined in Chapter 8, Section 2 of the Dealer Service Support Book. In addition to the RA form, each item submitted must have: All models: A Failure Control Tag (9004-9005-40) attached to the item, and completed in full. Items with missing or incomplete Failure Control Tags will be returned to the dealership at the dealers expense. For the Di251 Series: A printout of the Service Call Report that is accessible through the Maintenance Mode. For the Di250 Series: A copy of the dealers machine service history that lists the date and meter count related to the failure of the Fusing Unit or Imaging Unit. We are confident that this program is one more element in providing you with the service edge.

Duplexed Copies Watt Hour B.T.U.

188.20

642.14

13.20 0.94 0.00094

45.04 3.22 0.00322

22700.21 64460.21 17.91

77453.10 219938.22 61.09 64974.49 18.05 221692.96 61.58
MODEL: Di200f TEST SYSTEM Di200f AFR-17 PF-118 PF-119 AD-10 OT-102 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand-by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.12 Min 58.88 Min 7 Single-sided Copies Watt Hour B.T.U. 0.00 0.00 197.80 674.89 173.60 592.32 98.10 334.72 184.70 630.20 0.53 Min 109.00 371.91 24.20 82.57 11.10 37.87 10.90 37.19 0.79 2.71 0.00079 0.00271 55.17 Min/Hr 0.92 0.00 4351.60 164.81 1943.37 16167.42 0.00 14847.66 562.32 6630.76 55163.24

186.50

636.34

12.90 0.92 0.00092

44.01 3.14 0.00314

22462.38 64556.67 17.93

76641.66 220267.36 61.19 65019.53 18.06 221846.63 61.62

MODEL: Di251 TEST SYSTEM Di251 AFR-17 PF-117 PF-118 PF-119 AD-10 FN-109 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.74 Min 58.26 Min 7 Single-sided Copies Watt Hour B.T.U. 0.10 0.34 204.40 697.41 188.40 642.82 105.50 359.97 192.30 656.13 0.48 Min 110.50 377.03 16.00 54.59 3.90 13.31 5.00 17.06 0.14 0.48 0.00014 0.00048 54.90 Min/Hr 0.92 52.20 4496.80 164.02 2257.79 17303.69 178.11 15343.08 559.62 7703.56 59040.18

192.10

655.45

3.70 0.13 0.00013

12.62 0.45 0.00045

24110.47 52890.47 9.44

82264.94 180462.30 32.23 52850.47 9.44 180325.82 32.20
MODEL: Di251f TEST SYSTEM Di251f AFR-17 PF-117 PF-118 PF-119 AD-10 FN-109 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.74 Min 58.26 Min 7 Single-sided Copies Watt Hour B.T.U. 0.00 0.00 207.70 708.67 176.00 600.51 105.50 359.97 187.90 641.11 0.24 Min 112.70 384.53 31.70 108.16 11.90 40.60 7.20 24.57 0.43 1.45 0.00043 0.00145 56.58 Min/Hr 0.94 0.00 4569.40 168.96 1239.74 17824.86 0.00 15590.79 576.48 4230.01 60818.42

191.20

652.37

15.20 0.54 0.00054

51.86 1.85 0.00185

23634.00 66334.00 11.85

80639.21 226331.61 40.42 66994.00 11.96 228583.53 40.82
MODEL: Di351 TEST SYSTEM Di351 AFR-17 PF-117 PF-118 PF-119 AD-10 FN-109 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 2.41 Min 57.59 Min 9 Single-sided Copies Watt Hour B.T.U. 0.30 1.02 205.70 701.85 179.00 610.75 126.80 432.64 191.40 653.06 0.48 Min 132.80 453.11 26.70 91.10 12.40 42.31 6.00 20.47 0.23 0.78 0.00023 0.00078 53.27 Min/Hr 0.89 156.60 4525.40 159.23 3000.99 20190.96 534.32 15440.66 543.31 10239.39 68891.54

191.30

652.72

12.30 0.23 0.00023

41.97 0.78 0.00078

27873.95 96399.88 8.76

95105.92 328916.38 29.90 96379.51 8.76 328846.87 29.90
MODEL: Di351f TEST SYSTEM Di351f AFR-17 PF-117 PF-118 PF-119 AD-10 FN-109 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand by Copy Process

MATERIAL SAFETY DATA SHEET Page:5/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001 Studies performed in animal models other than rats have not demonstrated an association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.
MATERIAL SAFETY DATA SHEET Page:6/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001 EU Information Information on the label (88/379/EEC and 67/548/EEC): Symbol & Indication: Not required R-Phrase: Not required S-Phrase: Not required 76/769/EEC: All chemical substances in this product comply with all applicable rules or order under 76/769/EEC.
NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 1 Flammability: 1 Reactivity: 0 HMIS Rating: The National Paint and Coating Association(USA): Health: 1 Flammability: 1 Reactivity: 0 Recommended Uses: Starter for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co.,Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist. Literature References: ANSI Z400.1-1993 ISO 11014-1 Commission Directive 91/155/EEC IARC(1996): IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65, Printing Process and Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149-261 H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-299.
MATERIAL SAFETY DATA SHEET Page:1/5 Products Name: PHOTOCONDUCTOR
MSDS No.: DPO-0243 Issue Date: 11 May 2001
Product Name: PHOTOCONDUCTOR used for: Di200, Di250, Di350, Di200f, Di250f, Di350f, Di251, Di351, Di251f, Di351f Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
2. COMPOSITION / INFORMATION

INGREDIENTS

Hazardous Ingredients: None present
Major Ingredients: [Generic Name] Substrate Aluminum drum Coating layer Binder resin Photosensitive material Pigment

[CAS No.] +++

[%] >97 < 3

+++ +++ +++

MATERIAL SAFETY DATA SHEET Page:2/5 Products Name: PHOTOCONDUCTOR
Most Important Hazards and Effects of the Products For Human Health: No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: None
Symptoms of Overexposure: No symptoms expected with intended use. Routes of Entry: None Information Inhalation: No treatment Skin Contact: No treatment Eye Contact: No treatment Ingestion: No treatment Note to Physician: None

is is is is

required. required. required. required.
Suitable Extinguishing Media: Extinguishing Media to Avoid: Special Firefighting Procedures: Fire and Explosion Hazards: explosive hazards. Protection of Firefighters:
CO2, water, foam and dry chemical None None This material has no unusual fire No special equipment is required.
Personal Precautions: Environmental Precautions: Methods for Cleaning Up:
Not applicable with intended use. Not applicable with intended use. Not applicable with intended use.
Handling Technical Measures: None Precautions: This product will be scorched in the case of fire. Safe Handling Advice: None. Storage Technical Measures: None Storage Conditions: Keep and Store in a cool and dry place. Incompatible Products: None Packing Materials: Cardboard box designated by Minolta.
MATERIAL SAFETY DATA SHEET Page:3/5 Products Name: PHOTOCONDUCTOR
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures Ventilation: None required with intended use. Control Parameters OSHA-PEL(USA): Not Applicable DFG-MAK(EC): Not Applicable ACGIH-TLV(USA): Not Applicable Worksafe-TWA(Austl): Not Applicable
Personal Protective Equipment None required when used as intended in Minolta equipment. Hygiene Measures: Wash hands after handling.
Appearance Physical State: Solid Odor: Odorless

Form: Cylinder

Color: Green
<<Results of the coated compounds on the aluminum substrate.>> Boiling Point: Not applicable Melting/Softening Point: No data available Flash Point: Not applicable pH: Not applicable Explosion Properties: Not applicable Density(g/cm): 2.7 Solubility in water: insoluble Flammability: Not applicable Oxidizing Properties: No data available Ignition Temperature(C): No data available Vapor Pressure: Not applicable Partition Coefficient, n-Octanol/Water: Not applicable *= Based on data for other Minolta Products with similar ingredients)

Stability: Stable [ X ] Unstable [ ] Hazardous Reactions: None Conditions to avoid: None Materials to Avoid: None Hazardous Decomposition Products: CO, CO2
MATERIAL SAFETY DATA SHEET Page:4/5 Products Name: PHOTOCONDUCTOR
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data <<Result of the coated compounds on the aluminum substrate.>> Acute Toxicity: Inhalation, LC50(mg/l): Not applicable Ingestion(oral), LD50(mg/kg): >2000 (Rats) Dermal, LD50(mg/kg): Not applicable Eye irritation: Very slight irritation (Rabbits) Skin irritation: Non irritant (Rabbits) Skin sensitizer: No data available Mutagenicity: Negative (AMES test) (*= Based on data for other Minolta Products with similar ingredients) Local Effects: No data available Chronic Toxicity or Long Term Toxicity: None Carcinogenicity IARC Monographs: Not listed NTP(USA): Not listed OSHA Regulated(USA): Not listed
Appropriate Methods of Disposal Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations.
MATERIAL SAFETY DATA SHEET Page:5/5 Products Name: PHOTOCONDUCTOR
US Information Information on the label: Not required SARA(Superfund Amendments and Reauthorization Act) Title III 302 Extreme Hazardous Substance: None 311/312 Hazard Categories: None 313 Reportable Ingredients: None California Proposition 65: This product contains no chemical substances subject to California Proposition 65. EU Information Information on the label(88/379/EEC and 67/548/EEC): Symbol & Indication: Not required R-Phrase: Not required S-Phrase: Not required
NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 0 Flammability: 1 Reactivity: 0 HMIS RATING: The National Paint and Coating Association(USA): Health: 0 Flammability: 1 Reactivity: 0 Recommended Uses: Photoconductor for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co., Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist. Literature References: ANSI Z400.1-1993 ISO 11014-1 Commission Directive 91/155/EEC

)RU 1RUZD\ 8VHUV

$'9(56(/ 'HUVRP DSSDUDWHW EUXNHV Sn DQQHQ PnWH HQQ VSHVLILVHUW L GHQQH EUXNVDQYLVQLQJ NDQ EUXNHUHQ XWVHWWHV IRU XQV\QOLJ ODVHUVWUnOLQJ VRP RYHUVNULGHU JUHQVHQ IRU ODVHU NODVV 'HWWH HQ KDOYOHGHU ODVHU 0DNVLPDO HIIHNW WLOO ODVHUGLRGH HU P: 'L'L P: 'L RJ EOJHOHQJGH HU QP 'L'L QP 'L

/DVHU 6DIHW\ /DEHO

$ ODVHU VDIHW\ ODEHO LV DWWDFKHG WR WKH RXWVLGH RI WKH PDFKLQH DV VKRZQ EHORZ 0DQXIDFWXUHUV 1DPH 3ODWH /DVHU VDIHW\ ODEHO )RU (XURSH
CLASS 1 LASER PRODUCT LASER KLASSE 1 PRODUKT

4015O020AB

)RU 8QLWHG 6WDWHV

MINOLTA CO., LTD

2, Higashiakatsuchi, Yawata-cho, Toyokawa-shi Aichi-ken 442-8585, Japan

MANUFACTURED:

THIS PRODUCT COMPLIES WITH 21 CFR CHAPTER I, SUBCHAPTER J.

0946-7101-14

1166O248AA
7KH 0DQXIDFWXUHUV 1DPH 3ODWH LV DIIL[HG DW WKH SRVLWLRQ LOOXVWUDWHG DERYH 3OHDVH ZULWH GRZQ WKH 0RGHO 1DPH DQG 6HULDO 1R RI \RXU FRSLHU KHUH 0RGHO 6HULDO 1R

2]RQH 5HOHDVH

% /RFDWH WKH 0DFKLQH LQ D :HOO 9HQWLODWHG 5RRP $ QHJOLJLEOH DPRXQW RI R]RQH LV JHQHUDWHG GXULQJ QRUPDO RSHUDWLRQ RI WKLV PDFKLQH $Q XQSOHDVDQW RGRU PD\ KRZHYHU EH FUHDWHG LQ SRRUO\ YHQWLODWHG URRPV GXULQJ H[WHQVLYH PDFKLQH RSHUDWLRQV )RU D FRPIRUWDEOH KHDOWK\ DQG VDIH RSHUDWLQJ HQYLURQPHQW LW LV UHFRPPHQGHG WKDW WKH URRP ZHOO YHQWLODWHG ##"& 3ODFHU ODSSDUHLO GDQV XQH SLqFH ODUJHPHQW YHQWLOpH 8QH TXDQWLWp G R]RQH QpJOLJDEOH HVW GpJDJpH SHQGDQW OH IRQFWLRQQHPHQW GH ODSSDUHLO TXDQG FHOXLFL HVW XWLOLVp QRUPDOHPHQW &HSHQGDQW XQH RGHXU GpVDJUpDEOH SHXW rWUH UHVVHQWLH GDQV OHV SLqFHV GRQW O DpUDWLRQ HVW LQVXIILVDQWH HW ORUVTXH XQH XWLOLVDWLRQ SURORQJpH GH ODSSDUHLO HVW HIIHFWXpH 3RXU DYRLU OD FHUWLWXGH GH WUDYDLOOHU GDQV XQ HQYLURQQHPHQW UpXQLVVDQW GHV FRQGLWLRQV GH FRQIRUW VDQWp HW GH VpFXULWp LO HVW SUpIpUDEOH GH ELHQ DpUHU OD SLqFH RX VH WURXYH ODSSDUHLO

$FRXVWLF 1RLVH

0DFKLQH 1RLVH 5HJXODWLRQ *6*9 7KH VRXQG SUHVVXUH OHYHO DW WKH RSHUDWRU SRVLWLRQ
DFFRUGLQJ WR (1 LV HTXDO WR RU OHVV WKDQ G% $
7HUPV DQG 6\PEROV IRU WKH 7\SH RI 2ULJLQDOV DQG &RS\ 3DSHU
$ IHZ VSHFLDO WHUPV DQG V\PEROV DUH XVHG LQ WKLV PDQXDO WR GHVLJQDWH W\SHV RI RULJLQDOV DQG FRS\ SDSHU 7KLV SDJH H[SODLQV DERXW WKHVH WHUPV DQG V\PEROV
)HHGLQJ 'LUHFWLRQ FRS\ SDSHU SDWK
,Q WKLV FRSLHU V\VWHP FRS\ SDSHU LV WDNHQ XS IURP WKH ULJKWKDQG VLGH RI WKH FRSLHU IHG WKURXJK WKH FRSLHU WRZDUG WKH OHIWKDQG VLGH DQG HMHFWHG IDFH GRZQ RQWR WKH &RS\ 7UD\ ,Q WKH ILJXUH EHORZ WKH GLUHFWLRQ LQ ZKLFK WKH FRS\ SDSHU LV IHG DV LQGLFDWHG E\ WKH DUURZ LV FDOOHG WKH IHHGLQJ GLUHFWLRQ

2QO\ ZKHQ WKH 2SWLRQ 7UD\ LV ILWWHG! 2SHQ WKH 2SWLRQ 7UD\ FRYHU
5HPRYH WKH VKHHW RI SDSHU
&ORVH WKH 2SWLRQ 7UD\ FRYHU

2SHQ )URQW 'RRU >)1@

127( %H FDUHIXO DERXW D SURWUXVLRQ RQ WKH EDFNVLGH RI WKH 7UDQVSRUW 8QLW &RYHU ,W FDQ KXUW \RX
0HWDOOLF SDUWV LQVLGH 0LVIHHG &OHDULQJ *XLGH >)1@ DUH YHU\ KRW 'R QRW WRXFK DQ\WKLQJ EXW WKH SDSHU WR SUHYHQW \RX IURP JHWWLQJ EXUQHG
+ROGLQJ WKH *ULS VOLGH WKH 0DLOELQ )LQLVKHU DZD\ IURP WKH PDFKLQH
0HWDOOLF SDUWV LQVLGH 0LVIHHG &OHDULQJ *XLGH )1 DUH YHU\ KRW 'R QRW WRXFK DQ\WKLQJ EXW WKH SDSHU WR SUHYHQW \RX IURP JHWWLQJ EXUQHG
,I +ROH 3XQFK KDV EHHQ VHW WXUQ WKH +ROH 3XQFK $GMXVWPHQW 'LDO WHQ WLPHV GRZQZDUG 3XOO RXW WKH VKHHW RI SDSHU
2SHQ 0LVIHHG &OHDULQJ *XLGH >)1@ DQG SXOO RXW WKH VKHHW RI SDSHU
5. When the Message Misfeed detected. Appears
Close Misfeed Clearing Guides [FN3] and [FN2].
Remove the sheet of paper.

1166O184AA 4015O108AA

Raise Top Offset Tray cover [FN1].
Open Misfeed Clearing Guide [FN5], and remove the sheet of paper.

FN1 FN5

1166O173AA

1166O185AA

Pull out the sheet of paper and lower Top Offset Tray cover [FN1].
Close Misfeed Clearing Guide [FN4]. Slide the Mailbin Finisher back against the machine. Chapter 6

1166O174AA

Open Misfeed Clearing Guide [FN4] at the right side of the Finisher.

4015O109AA

NOTE If a misfeed has occurred in the Staple Unit, see Clearing the Staple Misfeed p.6-34

1166O183AA

When a Message Appears

-RE 7UD\

2SHQ WKH -RE 7UD\ FRYHU
&ORVH WKH -RE 7UD\ FRYHU
&ORVH WKH 8SSHU 5LJKW 'RRU DQG WKHQ FORVH WKH 5LJKW 'RRU

6KLIW 7UD\

2SHQ WKH 6KLIW 7UD\ FRYHU
&ORVH WKH 6KLIW 7UD\ FRYHU
:KHQ WKH 0HVVDJH &DQQRW VWDSOH $SSHDUV
&OHDULQJ WKH 6WDSOH 0LVIHHG
,I D VWDSOH PLVIHHG RFFXUV WKH PHVVDJH VKRZQ RQ WKH OHIW ZLOO DSSHDU &OHDU WKH VWDSOH PLVIHG DFFRUGLQJ WR WKH SURFHGXUH JLYHQ EHORZ
7XUQ WKH GLDO WR WKH OHIW WR PRYH WKH 6WDSOH 8QLW WZR 6WDSOHU 8QLWV LQ )1 WRZDUG WKH FHQWHU
2QO\ ZKHQ )LQLVKHU )1 LV PRXQWHG! 2SHQ 0LVIHHG &OHDULQJ *XLGH >)1@ RQ WKH ULJKW VLGH RI WKH )LQLVKHU

G G G G

G G G G G G ) G G )

( ( (

G G G G G

G

& ' L G G & G G G G G ( (

G G G G

G

( ( (

G G G G G

&

'HQVLW\

2WKHUV

G G

( (

)XQFWLRQ 6HW /DVW

2ULJ &RS\ &RS\ M

>LQ@ >LQ@ >LQ@ >LQ@ %RRNOHW &UHDWLRQ 2ULJLQDO 'LUHFWLRQ 0DUJLQ $XWR ([SRVXUH 0DQXDO ([SRVXUH 7H[W 7H[W3KRWR 3KRWR )LOH 0DUJLQ (GJH)UDPH (UDVH 3DJH ,QVHUWLRQ &RYHU 0RGH 2+3 ,QWHUOHDYLQJ ,PDJH 5HSHDW 6PDOO 2ULJ $GMXVWPHQW 6HSDUDWH 6FDQ 'LVWULEXWLRQ 6$') 0RGH ,QWHUUXSW ) G G G ) G ( ( ) G G G G G ) G ( ( ) G G G ) G ( ( ) G G G G G ) G ( ( ) G G G G G ) G G G ( ( ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' G G G ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' G G G ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' G ' ' ' ' ( ( ( ( ( ( ( ( ( ( ( ( G ( ( G G G G G G G G ( ( G G G G G G G G ( ( G G G G G G G G G G G ( ( ( ' G ( ( ' ' ' ' ' G G G ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' ' G G G % % ( ( ( ( ' G G G G

( ( ( ( (

G ' G

G G G G G

G ' G
&RQGLWLRQV IRU &RPELQHG )XQFWLRQV
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annot be used with the Automatic Document Feeder. (The function set first takes priority.) Cannot be used with the Automatic Document Feeder. (The function set last takes priority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