Communication mode Scanning resolution (main line x feed line) Data speed Transmission time Coding method Applicable network Options
*: TX marker is unavailable for 2 sided document feeder (ADFR).

List of Functions

Function Speed High speed scanning High speed printout ( : available

: unavailable)

(0.55 sec/Letter Crosswise fine) (35 CPM: 35 ppm/Letter Crosswise) (25 CPM: 25 ppm/Letter Crosswise) (20 CPM: 20 ppm/Letter Crosswise)
ECM mode High speed half tone Resolution Super fine mode Half tone transmission Auto retransmission after error Full automatic exposure control Smoothing Mixed mode (Text + Photo) Operability One-touch dialing
(Pass the 2 sec /Std. document)
(ECM) (Copy/FAX) (FAX function)
(300 destinations) # of abbreviated dialing number
Abbreviated dialing One-touch program dialing
(500 destinations) (30 destinations) # of one-touch dialing number
Auto re-dialing Destination retrieval
List of Functions Continued
Function Utility functions 2-in-1 printout 2-to-1 page transmission TX marker FAX/Phone automatic switch Password communication Multi polling Polling at regular times Non storage transmission Priority transmission Insert destination Automatic pause for PSTN number Power Source saving mode Switch document reading length Report functions Activity report (TX/RX) Transmission report Uncompleted transmission Xreport Serial broadcast report Relay report User account report Abbr. dial# list One-touch dial# list Fax program list Relay group list (with document margins, Result report) (with document margins) (with document margins, Result report) (with document margins, Result report) (ENERGY STAR) (1 m / 4 m) (option) (Ringer count method) ( : available
Function Memory functions Retransmission Document retransmission Reception by memory Transmission post Memory polling transmission confidential transmission confidential print Serial broadcast Relay broadcast Memory full control Quick memory transmission File backup Rotated Rx Selective polling System Configuration Relay transmission Extra telephone (PB forwarding receivable, PSTN port 1 only) Management function per business section Chain dialing Inch/mm conversion PC print Maintenance Self diagnostics (Option) (Memory dump/display, protocol trace, S/W switch list, service call setup Counter per application Adjust touch panel registration. Adjust ADF zoom ratio (main/sub) Adjust BS zoom ratio (main/sub) (FAX independently) (FAX independently) (100 sections, User management) (210 destinations) (F code) (Separate Tx) (F code) (30 destinations) ( : available

10. Copy Desk 11. Printer Controller Pi3502 12. 8MB/16MB/32 Memory 13. Data Terminal DT-103 14. Finisher FN-109 15. Finisher FN-110 16. Job Tray JS-201 Option Tray JS-100 Not available for the Di200 17. Shift Tray OT-19. Mailbin Finisher FN-504

SPECIFICATIONS

AFR-17
Name Type Duplexing Document Feeder Paper Take-Up: Take-up from top of stack, U-turn feeding Transport: Single-belt transport Turnover: Loop turnover Ejection: Straight ejection Installation Type of Document Mounted on the copier Plain paper:1-Sided mode -- 50 g/m to 110 g/m or 13 to 29 lbs. 2-Sided mode -- 60 g/m to 90 g/m or 16 to 24 lbs. Single Feed mode -- 35 g/m to 200 g/m or 9 to 53 lbs. Detectable Document Sizes Metric Area (Standard) A5 L, A5 C, B5 L, B5 C, A4 L, A4 C, B4 L, A3 L, L, 8-1/413 L Inch Area (Standard) 5-1/28-1/2 C/L, 8-1/211 C/L, 8-1/214L, 1115 L,1117 L Capacity Document Feed Tray: 50 sheets -- 80 g/m or 21 lbs. Document Exit Tray: 50 sheets -- 80 g/m or 21 lbs. Alignment Document Loading Modes Rear Document Edge Guide Face up Mixed Original 1-Sided 2-Sided Single Feed Power Source Power Consumption Dimensions DC 24 V -- supplied from the copier 60 W or less Width 603 mm or 23.7 inches Height 110 mm or 4.33 inches Depth 502 mm or 19.7 inches -- excluding Document Exit Tray Weight Operating Environment 12.0 kg Same as copier
Name Installation Type of Document Detectable Document Sizes Automatic Document Feeder Screwed to the copier Plain paper 5-1/28-1/2L/C, 8-1/211L/C, 8-1/214L, 1117L Capacity 70 sheets max. (50 sheets max when Mix Original Mode): 52.5~81.4 g/m 25 14~22lbs. Alignment Document Loading Document Transport Speed Rear Document Edge Guide Face up 20 sheets/min. (A4C or Letter C) 25 sheets/min. (A4C or Letter C)) 35 sheets/min. (A4C or Letter C)) Modes 1-Sided Original Mixed Original Power Source Power Consumption Dimensions DC24 V, DC5 V (supplied from the copier) 60 W Width Depth Height Weight 21-1/4 19-1/2 3-3/4

13-1/4 lbs

TYPES OF ORIGINALS WHICH SHOULD NOT BE USED
Type of Original Sheets stapled or clipped together Possible Trouble Take-up failure, damaged sheet, defective drive mechanism due to jammed clips. Sheets glued together Sheets folded, torn, or wrinkled Sheets severely curled Take-up failure, damaged sheet Take-up failure, damaged sheet Sheets misfed due to being dog-eared or fed in askew
Type Installation Type of Copy Paper Paper Sizes Switchback and Circulating Duplex Unit Mounted on the right side door of copier Plain paper, recycled paper A5L/C to A3L or 5-1/2 8-1/2L to 11 17L (L: Lengthwise, C: Crosswise) Paper Weight Registration Power Requirements Max. Power Consumption Dimensions 60 to 90 g/m2 or 16 to 24 lbs. Center DC24 V 10 %, DC5 V 5 % (supplied from copier) 21 W Width. Depth Height Weight 2-1/4 16-1/4 10-1/4

3RZHU 5HTXLUHPHQWV 0D[ 3RZHU &RQVXPSWLRQ 'LPHQVLRQV :HLJKW

'& 9 : RU OHVV

'& 9
VXSSOLHG IURP FRSLHU -RE 7UD\
: ' + : ' + -6 -RE 7UD\

6KLIW 7UD\

OEV LQFOXGLQJ EUDFNHW
27 6KLIW 7UD\ OEV LQFOXGLQJ EUDFNHW

SPECIFICATIONS FN-504

Type Installation Modes
Mode Non-Sort Paper Type Plain paper
Auto Feeder Multi Staple Finisher Freestanding Non-Sort, Sort/Group, Staple, Hole Punch
Paper Size Inch Areas: 5-1/2 8-1/2 to Metric Areas: A6L to A3L Weight Max. Capacity No. of Sheets to be Stapled
60 to 90 g/m 500 sheets: 16 to 24 lb A4C, 8-1/(80 g/m, 20 lb) 250 sheets: except A4C, 8-1/(80 g/m, 20 lb) (Hight: up to 73 mm, 2-3/4)
Recycled paper Thick paper OHP transparencies Translucent paper Postcards Envelopes Sort/Group Plain paper
20 sheets 10 sheets 10 sheets 10 sheets 10 sheets Inch Areas: 60 to 90 g/m 1000 sheets: 8-1/2 11, 16 to 24 lb A4L, 11 8-1/2 or smaller 11 8-1/2, (80 g/m, 20 lb) 8-1/2 14, 500 sheets: Metric Areas: B4L, 8-1/or larger A4C, A4L, A3L (80 g/m, 20 lb) Mail Bin: A4C , 8-1/(200 sheets/bin) except A4C, 8-1/(100 sheets/bin) Inch Areas: 60 to 80 g/m 8-1/2 11, 8-1/2, to 20 lb 8-1/2 14, Metric Areas: A4C, A4L, A3L Inch Areas: 60 to 90 g/m (3 holes) 16 to 24 lb 8-1/2 11, (2 holes) 8-1/2 11, 11 8-1/2, 8-1/2 14, Metric Areas: A4C, A4L, A3L Max. 50 sheets (60 to 80 g/m, 16 to 20 lb)

Staple

Recycled paper Plain paper
Recycled paper Hole Punch Plain paper
Registration No. of Holes Power Requirements Power Consumption Dimensions
Center Inch Areas: 3 holes (2 holes is an option); DC24 V (supplied from copier) 63 W Width: 25-3/4 Height: 38-3/4 Depth: 24-1/2

Weight

109 lbs.
Mode Paper Type Plain paper A3L to A6L to 5-1/2 81/2 Paper Size Paper Weight Capacity Finishing Tray Max. No. of Sheets to be Stapled
250 sheets: A4C, 8-1/(80 g/m2, 20 lb) 150 sheets: 60 to 90 g/m2 except A4C, 16 to 24 lb 8-1/(80 g/m2, 20 lb) (Height: up to 1st Tray 36 mm, 1-1/2)

Non-Sort

Thick paper Transparencies Translucent paper Postcards Envelopes
Sort Staple, Group Recycled paper Staple

60 to 90 g/m 16 to 24 lb

Plain paper Hole Punch Recycled paper
PRECAUTIONS FOR INSTALLATION

Installation Site

To ensure safety and utmost performance of the copier, the copier should NOT be used in a place: Where it will be subjected to extremely high or low temperature or humidity. Where it will be subjected to sudden fluctuations in either temperature or humidity. Which is exposed to direct sunlight. Which is in the direct air stream of an air conditioner, heater, or ventilator. Which has poor ventilation or is dusty. Which does not have a stable, level floor or where it will receive undue vibration. Which is near any kind of heating device. Which is near volatile flammables (thinner, gasoline, etc.). Where it may be splashed with water. Which puts the operator in the direct stream of exhaust from the copier. Where ammonia gas might be generated.

Power Source

If any other electrical equipment is sourced from the same power outlet, make sure that the capacity of the outlet is not exceeded. Use a power source with little voltage fluctuation. Never connect by means of a multiple socket any other appliances or machines to the outlet being used for the copier. Ensure that the copier does not ride on the power cord or communication cable of other electrical equipment, and that it does not become wedged into or underneath the mechanism. Make the following checks at frequent intervals: Is the power plug abnormally hot? Are there any cracks or scrapes in the cord? Has the power plug been inserted fully into the outlet? Does something, including the copier itself, ride on the power cord? Use an outlet with a capacity of 120 to 127 VAC, 15 A or more.

Grounding

Always ground the copier to prevent receiving electrical shocks in the case of electrical leakage. Connect the ground wire to the ground terminal of the outlet or a grounding contact which complies with the local electrical standards. Never connect the ground wire to a gas pipe, the ground wire for a telephone, lightning arrester, or a water pipe for fear of fire and electrical shock.

OTHER PRECAUTIONS

Use the following precautions when performing service jobs for a copier that uses a laser. When a service job needs to be performed in the laser beam path, such as when working around the printerhead or PC Drum, be sure first to unplug the power cord of the copier from the outlet. If the job requires that the power cord be left plugged in, observe the following precautions. 1. Take off your watch, ring and any other reflective object and wear laser protective goggles. 2. Keep users away from the job site. 3. Do not bring a highly reflective tool into the laser beam path during the service job.

PUBLICATIONS PRICE LIST

Di200/Di251/Di351 MODEL Di200/200f/Di251/251f/Di351/351f FN-504 Di351 Di251 Di200 AFR-17 for Di200/251/351 FN-109 FN-110 JS-201 OT-102 PF-119 AD-15 Di200/Di251/Di351 Di200/Di251/Di351 Di200/Di251/Di351 Di200/Di251/Di351 Di200/Di251/Di351 Di200/200f/Di251/251f/Di351/351f PF-117 PF-118 Di200/200f/Di251/251f/Di351/351f Di200/200f/Di251/251f/Di351/351f Di200f/Di251f/Di351f MODEL Di200f/Di251f/Di351f Di200f/Di251f/Di351f Di251f Di200f Di351f Di200f/Di251f/Di351f Di200f/Di251f/Di351f Di200f/Di251f/Di351f Di200f/Di251f/Di351f 7669-4011-15 ITEM NUMBER 7667-4011-04 7665-4612-22 7665-4011-21 7665-4012-21 7665-4013-21 7665-4490-21 7665-4653-21 7665-4654-21 7665-4602-21 7665-4491-21 7665-4658-22 7665-4661-21 7661-4011-11 7662-4011-11 7663-4613-11 76664011-01 7664-4011-01 7666-4011-21 7665-4659-21 7665-4658-21 7668-4011-25 7667-4011-13 7669-4011-16 ITEM NUMBER 7664-4017-02 7666-4017-01 7665-4016-21 7665-4017-21 7665-4015-21 7661-4015-11 7661-4968-21 7664-4015-01 7666-4015-01 MANUAL KIT CONTAINS: DESCRIPTION MAINTENANCE CARD W/OPTIONS PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL GENERAL SERVICE MANUAL FIELD SERVICE MANUAL OPTION SERVICE MANUAL QUICK GUIDE OPERATOR MANUAL PAGESCOPE PLUG AND PRINT QUICK GUIDE PARTS MANUAL PARTS MANUAL PRODUCT INFORMATION GUIDE RECOMMENDED TRUNK INVENTORY MANUAL KIT CONTAINS: DESCRIPTION OPERATOR MANUAL QUICK GUIDE PARTS MANUAL PARTS MANUAL PARTS MANUAL SERVICE MANUAL NETWORK APPLICATION KIT SERVICE MANUAL NETWORK APPLICATION OPERATOR MANUAL NETWORK APPLICATION QUICK GUIDE $218.00 DEALERCOST $4.50 $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $5.00 $10.00 $20.00 $20.00 $10.00 $10.00 $10.00 $9.00 $9.00 $20.00 $.50 $97.00 DEALERCOST $10.00 $10.00 $9.00 $9.00 $9.00 $20.00 $10.00 $10.00 $10.00

Applicable Models

Imaging Unit Model Key*

* The I/U Model Key must correspond to the actual machine model. Yield Protection Plan Claim Submission: All claims for the Yield Protection Program must be submitted though Minolta PTS Operations following the RA (Return Authorization) Request Procedures outlined in Chapter 8, Section 2 of the Dealer Service Support Book. In addition to the RA form, each item submitted must have: All models: A Failure Control Tag (9004-9005-40) attached to the item, and completed in full. Items with missing or incomplete Failure Control Tags will be returned to the dealership at the dealers expense. For the Di251 Series: A printout of the Service Call Report that is accessible through the Maintenance Mode. For the Di250 Series: A copy of the dealers machine service history that lists the date and meter count related to the failure of the Fusing Unit or Imaging Unit. We are confident that this program is one more element in providing you with the service edge.
WARRANTY Please refer to the Warranty and Special Programs section of theDealer Service Support Manual item number 9005-9005-18.

63(&,),&$7,21

7<3(

'L'L'L

&RQVROH'HVNWRS 7\SH &&' /LQH 6HQVRU 2UJDQLF 3KRWRFRQGXFWRU (OHFWURVWDWLF 'U\ 3RZGHUHG ,PDJH 7UDQVIHU WR 3ODLQ 3DSHU ZLWK D /DVHU GSL ZD\ V\VWHP 0DQXDO )HHG 7UD\ 6LQJOH VW 'UDZHU 6KHHWV 3ODLQ SDSHU 6KHHWV 6SHFLDO SDSHU QG 'UDZHU 6KHHWV 3ODLQ SDSHU &30 &30 6WDQGDUG
25,*,1$/ 6&$11,1* 6<67(0 3+272&21'8&725 &23<,1* 6<67(0 5(62/87,21 3$3(5 )((',1* 6<67(0
(;32685( 6<67(0 '(9(/23,1* 6<67(0 &+$5*,1* 6<67(0 ,0$*( 75$16)(5 6<67(0 3$3(5 6(3$5$7,1* 6<67(0 )86,1* 6<67(0 3$3(5 ',6&+$5*,1* 6<67(0 0$; 25,*,1$/ 6,=( &23< 3$3(5 7<3(
0LUURU 6FDQQLQJ 6OLW ([SRVXUH 07+* 6\VWHP &RPE (OHFWURGH '& 1HJDWLYH &RURQD ZLWK 6FRURWURQ 6\VWHP 5ROOHU ,PDJH 7UDQVIHU 3DSHU 6HSDUDWRU )LQJHUV DQG &KDUJH 1HXWUDOL]LQJ 3ODWH +HDW 5ROOHU &KDUJH 1HXWUDOL]LQJ %UXVK $/ ;/
3DSHU 6RXUFH 7\SH 3ODLQ SDSHU WR JP WR OE 7UDQVSDUHQFLHV 7KLFN SDSHU WR JP WR OE 3RVWFDUG JP OE 5HF\FOHG SDSHU 'LPHQVLRQV 0D[LPXP :LGWK /HQJWK 0LQLPXP :LGWK /HQJWK

1DPH ,QVWDOODWLRQ 7\SH RI 'RFXPHQW 'HWHFWDEOH 'RFXPHQW 6L]HV &DSDFLW\ $OLJQPHQW 'RFXPHQW /RDGLQJ 'RFXPHQW 7UDQVSRUW 6SHHG $XWRPDWLF 'RFXPHQW )HHGHU 6FUHZHG WR WKH FRSLHU 3ODLQ SDSHU /& /& / / VKHHWV PD[ VKHHWV PD[ ZKHQ 0L[ 2ULJLQDO 0RGH a JP aOEV 5HDU 'RFXPHQW (GJH *XLGH )DFH XS VKHHWVPLQ $& RU /HWWHU & VKHHWVPLQ $& RU /HWWHU & VKHHWVPLQ $& RU /HWWHU & 0RGHV 3RZHU 6RXUFH 3RZHU &RQVXPSWLRQ 'LPHQVLRQV 6LGHG 2ULJLQDO 0L[HG 2ULJLQDO '& 9 '& 9 VXSSOLHG IURP WKH FRSLHU : :LGWK 'HSWK +HLJKW :HLJKW
7<3(6 2) 25,*,1$/6 :+,&+ 6+28/' 127 %( 86('
7\SH RI 2ULJLQDO 6KHHWV VWDSOHG RU FOLSSHG WRJHWKHU 6KHHWV JOXHG WRJHWKHU 6KHHWV IROGHG WRUQ RU ZULQNOHG 6KHHWV VHYHUHO\ FXUOHG 3RVVLEOH 7URXEOH 7DNHXS IDLOXUH GDPDJHG VKHHW GHIHFWLYH GULYH PHFKDQLVP GXH WR MDPPHG FOLSV 7DNHXS IDLOXUH GDPDJHG VKHHW 7DNHXS IDLOXUH GDPDJHG VKHHW 6KHHWV PLVIHG GXH WR EHLQJ GRJHDUHG RU IHG LQ DVNHZ
7\SH ,QVWDOODWLRQ 7\SH RI &RS\ 3DSHU 3DSHU 6L]HV 3DSHU :HLJKW 5HJLVWUDWLRQ 3RZHU 5HTXLUHPHQWV 0D[ 3RZHU &RQVXPSWLRQ 'LPHQVLRQV '& 9 6ZLWFKEDFN DQG &LUFXODWLQJ 'XSOH[ 8QLW 0RXQWHG RQ WKH ULJKW VLGH GRRU RI FRSLHU 3ODLQ SDSHU UHF\FOHG SDSHU $/& WR $/ RU / WR / / /HQJWKZLVH & &URVVZLVH WR JP RU WR OEV &HQWHU '& 9 : :LGWK 'HSWK +HLJKW :HLJKW VXSSOLHG IURP FRSLHU
1DPH 7\SH ,QVWDOODWLRQ 7\SH RI &RS\ 3DSHU 3DSHU 6L]HV 3DSHU :HLJKW 5HJLVWUDWLRQ &DSDFLW\ 3RZHU 5HTXLUHPHQWV 0D[ 3RZHU &RQVXPSWLRQ 'LPHQVLRQV :LGWK 'HSWK +HLJKW :HLJKW 8QLYHUVDO &DVVHWWH OEV )L[HG 3DSHU 6L]H &DVVHWWH OEV '& 9 3) 8QLYHUVDO &DVVHWWH 3) )L[HG 3DSHU 6L]H &DVVHWWH $GGRQ SDSHU VRXUFH XQLW 0RXQWHG EHQHDWK 8SSHU 'UDZHU RI FRSLHU 3ODLQ SDSHU UHF\FOHG SDSHU %/& WR $/ RU [ /& WR [ / / /HQJWKZLVH & &URVVZLVH WR JP RU WR OEV
&HQWHU VKHHWV '& 9 : VXSSOLHG IURP FRSLHU
7\SH 7\SH RI 3DSHU 3DSHU 6L]H 3DSHU :HLJKW 5HJLVWUDWLRQ 3DSHU &DSDFLW\ 3RZHU 5HTXLUHPHQWV 'LPHQVLRQV '& 9 )URQW /RDGLQJ 7\SH /&& 3ODLQ SDSHU UHF\FOHG SDSHU %& $& /HWWHU & / /HQJWKZLVH & &URVVZLVH WR JP RU WR OEV &HQWHU VKHHWV ; '& 9 VXSSOLHG IURP FRSLHU :LGWK LQ 'HSWK LQ +HLJKW LQ :HLJKW OEV
Mode Paper Type Paper Size Paper Weight Capacity Finishing Tray Max. No. of Sheets to be Stapled
250 sheets: A4C, 8-1/(80 g/m2, 20 lb) 150 sheets: except A4C, 8-1/(80 g/m2, 20 lb) (Height: up to 36 mm, 1-1/2)
3ODLQ SDSHU JP OE -6 -RE 7UD\ 8SSHU ([LW 7UD\ $& /HWWHU & 6KHHWV ([FHSW $& /HWWHU & VKHHWV +HLJKW XS WR /RZHU ([LW 7UD\ $& /HWWHU & VKHHWV ([FHSW $& /HWWHU & VKHHWV ([FHSW +HLJKW XS WR $& /HWWHU & VKHHWV 27 6KLIW 7UD\ ([LW 7UD\ $& /HWWHU & VKHHWV +HLJKW XS WR 7UDQVSDUHQFLHV WKLFN SDSHU SRVWFDUG - -6 RE 7UD\ /RZHU ([LW 7UD\ VKHHWV 27 6KLIW 7UD\ ([LW 7UD\ VKHHWV

WARRANTY Please refer to the Warranty and Special Programs section of the Dealer Service Support Manual item number 9005-9005-18.

ASTM DATA SHEET

MODEL: Di200 TEST SYSTEM Di200 AFR-17 PF-118 PF-119 AD-10 OT-102 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand-by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.12 Min 58.88 Min 7 Single-sided Copies Watt Hour B.T.U. 0.00 0.00 198.20 676.26 175.00 597.10 99.30 338.81 186.20 635.31 0.54 Min 110.10 375.66 23.20 79.16 11.20 38.21 10.80 36.85 0.80 2.73 0.00080 0.00273 55.10 Min/Hr 0.92 0.00 4360.40 164.60 1995.06 16344.75 0.00 14877.68 561.61 6807.14 55768.28
Duplexed Copies Watt Hour B.T.U.

188.20

642.14

13.20 0.94 0.00094

45.04 3.22 0.00322

22700.21 64460.21 17.91

77453.10 219938.22 61.09 64974.49 18.05 221692.96 61.58
MODEL: Di200f TEST SYSTEM Di200f AFR-17 PF-118 PF-119 AD-10 OT-102 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand-by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.12 Min 58.88 Min 7 Single-sided Copies Watt Hour B.T.U. 0.00 0.00 197.80 674.89 173.60 592.32 98.10 334.72 184.70 630.20 0.53 Min 109.00 371.91 24.20 82.57 11.10 37.87 10.90 37.19 0.79 2.71 0.00079 0.00271 55.17 Min/Hr 0.92 0.00 4351.60 164.81 1943.37 16167.42 0.00 14847.66 562.32 6630.76 55163.24

186.50

636.34

12.90 0.92 0.00092

44.01 3.14 0.00314

22462.38 64556.67 17.93

76641.66 220267.36 61.19 65019.53 18.06 221846.63 61.62
MODEL: Di251 TEST SYSTEM Di251 AFR-17 PF-117 PF-118 PF-119 AD-10 FN-109 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.74 Min 58.26 Min 7 Single-sided Copies Watt Hour B.T.U. 0.10 0.34 204.40 697.41 188.40 642.82 105.50 359.97 192.30 656.13 0.48 Min 110.50 377.03 16.00 54.59 3.90 13.31 5.00 17.06 0.14 0.48 0.00014 0.00048 54.90 Min/Hr 0.92 52.20 4496.80 164.02 2257.79 17303.69 178.11 15343.08 559.62 7703.56 59040.18

192.10

655.45

3.70 0.13 0.00013

12.62 0.45 0.00045

24110.47 52890.47 9.44

82264.94 180462.30 32.23 52850.47 9.44 180325.82 32.20
MODEL: Di251f TEST SYSTEM Di251f AFR-17 PF-117 PF-118 PF-119 AD-10 FN-109 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.74 Min 58.26 Min 7 Single-sided Copies Watt Hour B.T.U. 0.00 0.00 207.70 708.67 176.00 600.51 105.50 359.97 187.90 641.11 0.24 Min 112.70 384.53 31.70 108.16 11.90 40.60 7.20 24.57 0.43 1.45 0.00043 0.00145 56.58 Min/Hr 0.94 0.00 4569.40 168.96 1239.74 17824.86 0.00 15590.79 576.48 4230.01 60818.42

INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 2.41 Min 57.59 Min 9 Single-sided Copies Watt Hour B.T.U. 0.30 1.02 207.40 707.65 180.50 615.87 128.00 436.74 191.70 654.08 0.25 Min 133.90 456.87 26.90 91.78 11.20 38.21 5.90 20.13 0.21 0.71 0.00021 0.00071 55.34 Min/Hr 0.92 156.60 4562.80 165.32 1928.07 21160.73 534.32 15568.27 564.07 6578.58 72200.39

191.50

653.40

11.00 0.20 0.00020

37.53 0.70 0.00070

27808.20 94989.68 8.64

94881.57 324104.78 29.46 94948.94 8.63 323965.77 29.45
MATERIAL SAFETY DATA SHEET Page:1/6 Product Name: MT TONER 302[]
1. PRODUCT AND COMPANY IDENTIFICATION
MSDS No.:PPC-0723 Issue Date: 11 May 2001
Product Name: MT TONER 302[] [],denoted with an alphabet. used for: Di200, Di200f, Di250, Di250f, Di251, Di251f, Di350, Di350f, Di351, Di351f Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
COMPOSITION / INFORMATION

ON INGREDIENTS

Substance [

Preparation [ X ]

Hazardous Ingredients: Chemical Name: Carbon black (5-10%) CAS No.: 1333-86-4 OSHA Z-Tables(USA): 3.5mg/m3 NTP(USA): Not listed Symbol(EC): Not listed DFG-MAK(GER): III 3B
EEC-No.: 215-609-9 ACGIH-TLV(USA): 3.5mg/m3 IARC Monographs: Group 2B R-Phrase(EC): Not listed Worksafe-TWA(Austl): 3mg/m3
Major Ingredients: [Generic Name] Polyester resin Carbon black Polyolefin wax Magnetite Titanium compound

8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures Ventilation: None required with intended use. Control Parameters(As total dust) OSHA-PEL(USA): 15mg/m3 ACGIH-TLV(USA): 10mg/m3 DFG-MAK(GER): 6mg/m3 Worksafe-TWA(Austl.): 10mg/m3 Personal Protective Equipment None required when used as intended in Minolta equipment. For use other than normal customer-operating procedures (such as in bulk toner processing facilities), goggles and respirators may be required. Hygiene Measures: Wash hands after handling.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance Physical State: Solid Form: Powder Color: Black Odor: Faint odor Particle Size(m): 5 - 15 PH/Boiling Point(C): Not applicable Melting Point(C): No data available Softening Point(C): 110 - 125 * Flash Point(C): Not applicable Ignition Temperature(C): > 400 * Explosion Properties: No data available Vapor Pressure: Not applicable Density(g/cm): 1.2 * (bulk density: 0.41 *) Solubility in water: Negligible Oxidizing Properties: No data available Partition Coefficient, n-Octanol/Water: Not applicable
MATERIAL SAFETY DATA SHEET Page:4/6 Product Name: MT TONER 302[] MSDS No.:PPC-0723 Issue Date: 11 May 2001
10. STABILITY AND REACTIVITY
Stability: Stable [ X ] Unstable [ ] Hazardous Reactions: Dust explosion, like most finely divided organic powders. Conditions to avoid: Electric discharge, throwing into fire. Materials to Avoid: Oxidizing materials. Hazardous Decomposition Products: CO, CO2
11. TOXICOLOGICAL INFORMATION
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data Acute Toxicity: Inhalation, LC50(mg/l): >1.93 (Rats,4hour) * (This was the highest attainable concentration.) Ingestion(oral), LD50(mg/kg): >2000 (Rats) * Dermal, LD50(mg/kg): No data available Eye irritation: Slight conjunctival irritation (Rabbits) * Skin irritation: Non irritant (Rabbits) * Skin sensitizer: Non sensitizer (Guinea pig) * Mutagenicity:(AMES test) Negative * (*= Based on data for other Minolta Products with similar ingredients) Local Effects: see Chronic Toxicity or Long term Toxicity Chronic Toxicity or Long Term Toxicity: Prolonged inhalation of excessive dust may cause lung damage. It is attributed to lung overloading, a generic response to excessive amounts of any dust retained in the lungs for a prolonged interval. Use of this product, as intended, does not result in inhalation of excessive dust. In a study in rats by chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of rats in the high concentration(16mg/m) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle(4mg/m) exposure group. But no pulmonary change was reported in the lowest(1mg/m) exposure group, the most relevant level to potential human exposures. Carcinogenicity IARC Monographs/NTP(USA)/OSHA Regulated(USA): Not listed In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This evaluation is given to Carbon Black for which there is inadequate human evidence, but sufficient animal evidence. The latter is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce

MATERIAL SAFETY DATA SHEET Page:5/6 Product Name: MT TONER 302[] MSDS No.:PPC-0723 Issue Date: 11 May 2001 particle overload of the lung. Studies performed in animal models other than rats have not demonstrated an association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.
12. ECOLOGICAL INFORMATION
No data are available on the adverse effects of this material on the environment.
13. DISPOSAL CONSIDERATION
Appropriate Methods of Disposal Preparation(community provisions): Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations. Contaminated Packaging: Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations. Precautions: Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage.
14. TRANSPORT INFORMATION
Special Precautions: None Information on Code and Classifications According to International Regulations UN Classification: None
15. REGULATORY INFORMATION
US Information Information on the label: Not required TSCA(Toxic Substances Control Act): All chemical substances in this product comply with all applicable rules or order under TSCA. SARA(Superfund Amendments and Reauthorization Act) Title III 302 Extreme Hazardous Substance: None 311/312 Hazard Categories/313 Reportable Ingredients: None California Proposition 65: This product contains no chemical substances subject to California Proposition 65.
MATERIAL SAFETY DATA SHEET Page:6/6 Product Name: MT TONER 302[] MSDS No.:PPC-0723 Issue Date: 11 May 2001 EU Information Information on the label (88/379/EEC and 67/548/EEC): Symbol & Indication: Not required R-Phrase: Not required S-Phrase: Not required 76/769/EEC: All chemical substances in this product comply with all applicable rules or order under 76/769/EEC.

16. OTHER INFORMATION

NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 1 Flammability: 1 Reactivity: 0 HMIS Rating: The National Paint and Coating Association(USA): Health: 1 Flammability: 1 Reactivity: 0 Recommended Uses: Toner for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co.,Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist. Literature References: ANSI Z400.1-1993 ISO 11014-1 Commission Directive 91/155/EEC IARC(1996): IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65, Printing Process and Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149-261 H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-299.
MATERIAL SAFETY DATA SHEET Page:1/6 Product Name: STARTER IN IMAGING UNIT
MSDS No.:PPC-1693 Issue Date: 11 May 2001
Product Name: STARTER IN IMAGING UNIT used for: Di200, Di200f, Di250, Di250f, Di251, Di251f, Di350, Di350f, Di351, Di351f Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
2. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous Ingredients: Chemical Name: Carbon black (1- 5%) CAS No.: 1333-86-4 OSHA Z-Tables(USA): 3.5mg/m3 NTP(USA): Not listed Symbol(EC): Not listed DFG-MAK(GER): III 3B
Major Ingredients: [Generic Name] Magnetite Polyester resin Polyester resin Styrene acrylate copolymer Carbon black
[CAS No.] 1317-61-9 +++ +++ +++ 1333-86-4
[%] 60-70 10-20 10-20 1- 5 1- 5
MATERIAL SAFETY DATA SHEET Page:2/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001

Stability: Stable [ X ] Unstable [ ] Hazardous Reactions: None Conditions to avoid: None Materials to Avoid: None Hazardous Decomposition Products: CO, CO2
MATERIAL SAFETY DATA SHEET Page:4/5 Products Name: PHOTOCONDUCTOR
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data <<Result of the coated compounds on the aluminum substrate.>> Acute Toxicity: Inhalation, LC50(mg/l): Not applicable Ingestion(oral), LD50(mg/kg): >2000 (Rats) Dermal, LD50(mg/kg): Not applicable Eye irritation: Very slight irritation (Rabbits) Skin irritation: Non irritant (Rabbits) Skin sensitizer: No data available Mutagenicity: Negative (AMES test) (*= Based on data for other Minolta Products with similar ingredients) Local Effects: No data available Chronic Toxicity or Long Term Toxicity: None Carcinogenicity IARC Monographs: Not listed NTP(USA): Not listed OSHA Regulated(USA): Not listed
Appropriate Methods of Disposal Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations.
MATERIAL SAFETY DATA SHEET Page:5/5 Products Name: PHOTOCONDUCTOR
US Information Information on the label: Not required SARA(Superfund Amendments and Reauthorization Act) Title III 302 Extreme Hazardous Substance: None 311/312 Hazard Categories: None 313 Reportable Ingredients: None California Proposition 65: This product contains no chemical substances subject to California Proposition 65. EU Information Information on the label(88/379/EEC and 67/548/EEC): Symbol & Indication: Not required R-Phrase: Not required S-Phrase: Not required
NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 0 Flammability: 1 Reactivity: 0 HMIS RATING: The National Paint and Coating Association(USA): Health: 0 Flammability: 1 Reactivity: 0 Recommended Uses: Photoconductor for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co., Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist. Literature References: ANSI Z400.1-1993 ISO 11014-1 Commission Directive 91/155/EEC

DiALTA Di200f DIGITAL PRINTER/COPIER/SCANNER/FAX
Digital productivity is the key to managing information more efficiently and the Minolta DiALTA Di200f presents an uncompromising all-in-one digital solution for mid-volume and low-volume applications. It's a powerful 20-ppm copier with superior high-resolution image

SUPER G3 FAX

quality. It's also a high-productivity fax with Super G3 technology and JBIG data compression to make faxes move faster. Add the optional Pi3502 Print Controller, and you'll have complete PC printing and scanning capabilities. There's even an optional Network Application Kit to make Scan-to-E-Mail as quick and simple as sending a fax.
TRANSMITS AT 3 SECONDS PER PAGE WITH 33.6 KBPS MODEM SPEED, JBIG DATA COMPRESSION; HIGH-SPEED FAX PROCESSING REDUCES "HANDSHAKING" TIME 11" X 17" FAX YOU CAN SEND AND RECEIVE DOCUMENTS FROM THE DOCUMENT FEEDER OR PLATEN UP TO 11" x 17" NO NEED TO FAX 2-PAGE SPREADS AS SEPARATE PAGES HIGH-SPEED PRINT/COPY COPIES AND PRINTS AT 20-PPM TO HANDLE DOCUMENT NEEDS WITH SPEED AND CONVENIENCE HIGH RESOLUTION FAX RESOLUTION OF 400 x 400 DPI, PRINT/COPY RESOLUTION OF 600 X 600 DPI AT FULL RATED SPEED SCAN ONCE/PRINT MANY SAVES TIME BY MAKING MULTIPLE COPIES FROM A SINGLE SCAN CONVENIENT AUTO DIALING 500 AUTO DIALING LOCATIONS, 300 ONE-TOUCH DIALING LOCATIONS, 200 ABBREVIATED DIALING LOCATIONS AND INDEX TO CATEGORIZE YOUR ONE-TOUCH NUMBERS FOR EASY RECALL VERSATILE PAPER SUPPLY MAXIMUM CAPACITY OF 2,476 SHEETS; UNIVERSAL TRAYS ACCEPT PAPER SIZES UP TO 11" x 17" PRODUCTIVITY OPTIONS

M I N O L T A

D I G I T A L

D O C U M E N T

D E L I V E R Y

S Y S T E M

T Y P E : D I G I TA L P R I N T E R / CO P I E R / S C A N N E R / FA X IMAGING: MICRO-TONING HIGH-GRADE (MT-HG) PRINT SPEED: 20 ppm P R I N T S I Z E : U P T O 11 " x " PRINT/COPY RESOLUTION: 600 x 600 dpi FAX RESOLUTION: UP TO 400 x 400 dpi MODEM SPEED: 33.6 Kbps FAX MEMORY: UP TO 400 PAGES (S TANDARD)

P RINT|CO P Y|SC AN|FAX

AUTOMATIC DOCUMENT FEEDING, STACKLESS DUPLEXING, AND OTHER OPTIONS TO SUIT WORKPLACE NEEDS PC CONNECTIVITY OPTIONAL Pi3502 PRINT CONTROLLER FOR NETWORKABLE PRINTING FROM YOUR DESKTOP PC AS WELL AS OPTIONAL NETWORK SCANNING
DiALTA Di200f SPECIFICATIONS
T YPE: Console Digital Printer/Copier/Scanner/Fax COMMUNICATION LINE: Public switched telephone network (PSTN) COMPATIBILIT Y: G3, Super G3 DATA COMPRESSION: MH, MR, MMR, JBIG SCANNING SYSTEM: CCD Line Sensor MODEM SPEED: 33.6 Kbps (max; automatic fallback) TRANSMISSION SPEED: Less than 3 seconds per page * SCANNING SPEED: Up to 70 sheets per minute (with AF-9 Auto Document Feeder) GRAYSCALE: 256 Gradations MEMORY: 16 MB (standard) 64 MB (maximum) FAX MEMORY: Up to 400 pages * (standard) Up to 2,900 pages * (maximum) AUTO DIALING: 500 Locations ONE-TOUCH DIALING: 300 Locations ABBREVIATED DIALING: 200 Locations
MINOLTA COPIERS RECOGNIZED AS MOST RELIABLE BY END USERS 1999 AND 2000
WARM-UP TIME: Less than 1 minute FIRST COPY: Less than 5.8 seconds (letter) MAGNIFICATION: Zoom range: 25 - 400%,.1% increments Preset reduction: 50%, 65%, 73%, 79%, 93% Preset enlargement: 121%, 129%, 155%, 200% EXPOSURE MODES: Auto Exposure Mode Text/Photo Mode Photo Mode Text Mode Manual Exposure Mode PAPER SUPPLY: 275-sheet multi-purpose paper tray (11" x 17" to 5-1/2" x 8-1/2") 50-sheet specialty paper (cards, OHP transparencies, labels) Single-sheet manual bypass 550-sheet universal paper drawer (option) 550-sheet fixed paper drawer (option) MAXIMUM PAPER CAPACIT Y: 2,476 sheets (total, with options) DOCUMENT FEEDERS: AF-9 Automatic Document Feeder (option) 70-sheet capacity Original size: up to 11" x 17" 1-sided, 2-sided originals Mixed original detection Single-feed mode AFR-17 Duplexing Document Feeder (option) 50-sheet capacity Original size: up to 11" x 17" 1-sided, 2-sided originals Mixed original detection Single-feed mode POWER REQUIREMENTS: 120 V; 60 Hz; 10.5 A POWER CONSUMPTION: Less than 1300 W DIMENSIONS (WxHxD): 23-1/2" x 21-1/4" x 27-3/4" WEIGHT: 109.25 lbs. OPTIONS: AF-9 Automatic Document Feeder AFR-17 Duplexing Document Feeder AD-15 Duplex Unit PF-118 550-Sheet Universal Paper Drawer PF-119 550-Sheet Fixed Paper Drawer OT-102 Shift Tray JS-201 Job Separator Tray OC-3 Original Cover Kit CT-2 Copy Table CD-2M Copy Desk (2-Drawer Height) PF-10T Cabinet (3-Drawer Height) Memory Upgrades (8 MB, 16 MB, 32 MB) Pi3502 Print Controller (PCL 6) PS3/Scan to E-Mail, File, URL NIC 10/100 BaseT Network Application Kit-2

AVAILABLE FACSIMILE FUNCTIONS: Auto Dialing (500 locations) (300 one-touch dialing locations) (200 abbreviated dialing locations) Auto/Manual Dialing Batch Transmission Book Scanner Transmission Broadcast (210 destinations) Confidential Mailbox Transmission/Reception Criss/Cross Sorting Delayed Broadcast Fax Print and/or Forward Fax Reduction (100% - 60% in both directions) Group Broadcasting Memory Backup Memory Transmission/Reception Multi-Access Polling Transmission/Reception Priority Transmission Program Keys (30) Quick Memory Transmission Relay Broadcast (up to 5 relay stations) Remote Copying Selective Polling Reception Selective Polling Transmission (up to 10 bulletin boards) Timer Transmission (up to 64 documents) Transmission Marker Up to 11" x 17" Document Transmission/Reception AVAILABLE PRINT/COPY/SCAN FUNCTIONS: ** APS/AMS Auto Duplex, Stackless Auto/Manual/Photo Exposure Auto Tray Switching Book Copy Booklet Pagination Copy Track Criss/Cross Sorting Energy Save Mode Erase (Border, Edge) Job List Image Repeat Interrupt (Pause) Scanning (Scan-to-E-Mail, Scan-to-File, Scan-to-URL; File type: PDF, TIFF) Separate Scanning Storyboarding (2-in-1) Text, Photo, Text/Photo Modes Zoom
BROADCAST: 210 Destinations PRINT/COPY SPEED: 20-ppm (letter), 8-1/2" x 11" portrait 17-ppm (letter-R), 8-1/2" x 11" landscape 14-ppm (legal), 8-1/2" x 14" 12-ppm (ledger), 11" x 17"
ALWAYS USE MINOLTA GENUINE SUPPLIES ISO14001 Certification *Transmit times and page capacity are based on ITU-T (CCITT) Test Chart No. 1 (in standard mode). **Some features may require options. Design & specifications are subject to change without notice. Machines are shown configured w/options. 2001 Minolta Corporation. All rights reserved. Reproduction in whole or in part without written permission is prohibited. Minolta, DiALTA, and The essentials of imaging are trademarks of Minolta. All other brands and product names are registered trademarks or trademarks of their respective owners.
PRINT/COPY RESOLUTION: True 600 x 600 dpi FAX RESOLUTION: 200 x 100 dpi 200 x 200 dpi 400 x 400 dpi Text/Photo (400 x 400 dpi) Grayscale (200 x 200 dpi) Super Grayscale (400 x 400 dpi) IMAGING SYSTEM: Electrostatic Dry Powdered Image Transfer to Plain Paper DEVELOPMENT SYSTEM: Minolta Micro-Toning High-Grade (MT-HG)

Minolta Corporation Office Systems Division 101 Williams Drive Ramsey, NJ 07446 www.minoltausa.com

Item #: 7650-0000-79