P R O D U C T

T E C H N I C A L

S U P P O R T

D I V I S I O N
Product Information Guide
Di200/Di200f/Di251/Di251f/Di351/Di351f
Information contained in any literature published by Minolta Corporation concerning the expected life or yields of parts, supplies or other products mean time between failures or any other service costs are and shall be deemed to be estimates only. Results in actual field experience may vary substantially from such estimates. In no event shall such estimates be deemed or represented to be in any way a representation or warranty of Minolta Corporation.

7668-4011-25

Table of Contents
Di200/Di251/Di351 Specifications..... 1 Di200f/Di251f/Di351f Specifications..... 3 Di200f/Di251f/Di351f Network Application Kit Specifications.... 6 System Options...... 8 Duplex Document Feeder AFR-17 Specifications.... 9 Automatic Document Feeder AF-9 Specifications.... 10 Switchback and Circulating Duplex Unit AD-15 Specifications... 11 PF-118 (Universal Cassette) Specifications.... 11 PF-119 (Fixed Paper Size Cassette) Specifications.... 11 PF-117 Front Loading Type LCC Specifications.... 11 Multi Staple Finisher (FN-109) Specifications.... 12 Single Staple Finisher (FN-110) Specifications.... 12 Option Tray JS-100..... 12 Job Tray JS-201 and Shift Tray OT-102 Specifications.... 13 Auto Feeder Multi Staple Finisher FN-504 Specifications.... 14 Precautions for Installation..... 15 Publications Price List..... 17 Service Training...... 17 Yield Protection Program..... 18 Warranty...... 19 ASTM MSDS

SPECIFICATION

Di200/Di251/Di351
Console/Desktop Type CCD Line Sensor Organic Photoconductor Electrostatic Dry Powdered Image Transfer to Plain Paper with a Laser 600 dpi 3-way system Manual Feed Tray Single 1st Drawer 250 Sheets (Plain paper) 50 Sheets (Special paper) 2nd Drawer 500 Sheets (Plain paper) 35 CPM/25 CPM: Standard
ORIGINAL SCANNING SYSTEM PHOTOCONDUCTOR COPYING SYSTEM RESOLUTION PAPER FEEDING SYSTEM
EXPOSURE SYSTEM DEVELOPING SYSTEM CHARGING SYSTEM IMAGE TRANSFER SYSTEM PAPER SEPARATING SYSTEM FUSING SYSTEM PAPER DISCHARGING SYSTEM MAX. ORIGINAL SIZE
Mirror Scanning, Slit Exposure MT-HG System Comb Electrode (1) DC Negative Corona with Scorotron System Roller Image Transfer Paper Separator Fingers and Charge Neutralizing Plate Heat Roller Charge Neutralizing Brush A3L, 11X17L
COPY PAPER TYPE Paper Source Type Plain paper (60 to 90 g/m2, 16 to 24lb.) Transparencies Thick paper (91 to 157 g/mto 42lb.) Postcard (190 g/m2 50lb.) Recycled paper Dimensions Maximum (Width Length) Minimum (Width Length) 1st Drawer mm (79 x 115) mm (24 x 37) Manual Feed Tray mm (79 x 115) mm (24 x 37) : Reliably fed MULTIPLE COPIES WARMING-UP TIME Di351 (1 to 999), Di200, Di251(1 to 99) Di351(70 sec. or less) Di200, Di251 (60 sec. or less) FIRST COPY TIME A4C, 1st Drawer, full size mode Di351 (4.6 sec.), Di200, Di251(5.8 sec.)
CONTINUOUS COPY SPEED (copies/min) Size 11 X 17L 8-1/2 X 14L 8-1/2 X 11L 8-1/2 X 11C Di35 Di25 Di20
ZOOM RATIOS Fixed Full Size Enlargement 1.000 2.000 1.55 1.29 1.21 Reduction 0.93 0.79 0.73 0.65 0.500 Variable 25 % to 400 % (in 0.1 % increments)
FUSING TEMPERATURE LENS EXPOSURE LAMP POWER/CURRENT CONSUMPTION (copier only) Exposure Lamp (Rating) Fusing Roller Heater Lamp (Rating) 24 V 20 W Di351: 800 W DiW DiW
190C or 374F Through Lens (F = 4.0, f = 62mm) Fluorescent Lamp
Max. Power Consumption (full system) 120 V: 1350 W
Max. Current Consumption (full system) Inch area Di351, Di251 11.5 A Di200 10.5 A

POWER REQUIREMENTS

120 to 127 VAC, 50/60 Hz
ENVIRONMENTAL CONDITIONS Temperature Humidity Ambient Illumination Levelness 10 to 32 C with a fluctuation of 10 C or less per hour 15 to 85 % RH with a fluctuation of 10 % RH or less per hour 3,000 lux or less 1 (1.75 mm/100 mm)

COPIER DIMENSIONS

Di351: W.25, D.27-3/4, H.25-1/2 Di251 W.23-1/2, D.27-3/4, H.25-1/2 Di200 W.23-1/2, D.27-3/4, H.21-1/4

COPIER WEIGHT

Di351 133-1/2 lb Di251 129-1/2 lb Di200 109-1/4 lb
Di200f Di251fDi-351f SPECIFICATIONS
Memory Capacity Specifications 35 CPM Machine: 32 MB, 25 CPM Machine: 32 MB, 20 CPM Machine: 16 MB ECM / Gx 3.85 line/mm, 8 x 7.7 line/mm, 8 x 15.4 line/mm, 16 x 15.4 line/mm G3 / ECM: 33.6 Kbps - 2.4 Kbps G3 / ECM: Image signal - Pass the 2 sec (V.34 JBIG) MH / MR / MMR / JBIG G3 / ECM: Phone line Optional memory board G3 Multi Port TX marker *
Communication mode Scanning resolution (main line x feed line) Data speed Transmission time Coding method Applicable network Options
*: TX marker is unavailable for 2 sided document feeder (ADFR).

List of Functions

Function Speed High speed scanning High speed printout ( : available

: unavailable)

(0.55 sec/Letter Crosswise fine) (35 CPM: 35 ppm/Letter Crosswise) (25 CPM: 25 ppm/Letter Crosswise) (20 CPM: 20 ppm/Letter Crosswise)
ECM mode High speed half tone Resolution Super fine mode Half tone transmission Auto retransmission after error Full automatic exposure control Smoothing Mixed mode (Text + Photo) Operability One-touch dialing
(Pass the 2 sec /Std. document)
(ECM) (Copy/FAX) (FAX function)
(300 destinations) # of abbreviated dialing number
Abbreviated dialing One-touch program dialing
(500 destinations) (30 destinations) # of one-touch dialing number
Auto re-dialing Destination retrieval
List of Functions Continued
Function Utility functions 2-in-1 printout 2-to-1 page transmission TX marker FAX/Phone automatic switch Password communication Multi polling Polling at regular times Non storage transmission Priority transmission Insert destination Automatic pause for PSTN number Power Source saving mode Switch document reading length Report functions Activity report (TX/RX) Transmission report Uncompleted transmission Xreport Serial broadcast report Relay report User account report Abbr. dial# list One-touch dial# list Fax program list Relay group list (with document margins, Result report) (with document margins) (with document margins, Result report) (with document margins, Result report) (ENERGY STAR) (1 m / 4 m) (option) (Ringer count method) ( : available
Function Memory functions Retransmission Document retransmission Reception by memory Transmission post Memory polling transmission confidential transmission confidential print Serial broadcast Relay broadcast Memory full control Quick memory transmission File backup Rotated Rx Selective polling System Configuration Relay transmission Extra telephone (PB forwarding receivable, PSTN port 1 only) Management function per business section Chain dialing Inch/mm conversion PC print Maintenance Self diagnostics (Option) (Memory dump/display, protocol trace, S/W switch list, service call setup Counter per application Adjust touch panel registration. Adjust ADF zoom ratio (main/sub) Adjust BS zoom ratio (main/sub) (FAX independently) (FAX independently) (100 sections, User management) (210 destinations) (F code) (Separate Tx) (F code) (30 destinations) ( : available

(destination changeable)

Di200f/Di251f/Di351f NETWORK APPLICATIONS SPECIFICATIONS
One-Touch Document E-mail (Internet Facsimile Function) Specifications Communication Protocol E-mail transmission: SMTP (IETF RFC821 and RFC822) protocol TCP/IP communication E-mail receipt: POP3 (IETF RFC1725 and RFC1939) protocol, TCP/IP communication Document Size Resolution Data Format Coding Method Applicable Line Letter, Legal, Ledger 200100 dpi, 200200 dpi, 400400 dpi, 600600 dpi E-mail format: MIME, Attached file format: TIFF-F MH, MR, MMR, JBIG Ethernet LAN (100BASE-TX, 10BASE-T connection)
E-mail RX-Fax Distribution Destination Registration F CODE and destination e-mail address are specified in user registration of this product.
One-Touch Network File TX (One-Touch Filing Function) Specifications Communication Protocol TCP/IP communication Document Size Resolution Data Format Coding Method Destination Registration Letter, Legal, Ledger 200100 dpi, 200200 dpi, 400400 dpi, 600600 dpi TIFF-F MH, MR, MMR Registration of IP address of PC: Max. 500 (including 300 for One-Touch key) Storing Folder Specification One directory is specified to the PC. A directory specified from the PC can be created for each data under the directory.
Network File Scanner (IP Scanner) Specifications Communication Protocol TCP/IP communication Document Size Resolution Data Format Coding Method Destination Registration Letter, Legal, Ledger 200200 dpi, 400400 dpi, 600600 dpi TIFF-F MH, MR, MMR Destination registration is not required (An IP address is automatically notified by PC when scan is reserved).: Up to six keys simultaneously. Storing Folder Specification One directory is specified to the PC. A directory specified from the PC can be created for each file under the directory.

MFP Agent Specifications

Communication Protocol TCP/IP, HTTP Data Format Display HTML Operation Status (Copy/Printer/Fax/Internet Fax/Scanner) Device Status (Alarm/Paper Size and Paper Empty/Option Configuration) Registration/View Maintenance Abbreviated Dialing/One-Touch/Index/Bulletin Board/Box List Initial Setting/User Reg./User Total/Total Page/Power Save/ Network Setting/Scan Setting
Operating Environment of Utilities

CPU OS

Pentium 133 MHz or faster Windows Me/Windows 95/Windows 98 Windows 2000/Windows NT4.0

Memory

32 MB or more (64 MB recommended) For Windows 2000, 64 MB or more (128 MB recommended)

HD Capacity

50 MB or more of free space

SYSTEM OPTIONS

17 6,14,5
1. Duplexing Document Feeder AFR-17 2. Automatic Document Feeder AF-9 3. Original Cover Kit OC-3 4. Plug-In Counter 5. Duplex Unit AD-15 (Di351 Standard) 6. Paper Feed Unit PF-118 7. Paper Feed Unit PF-119 (Di351,Di251 Standard) 8. Large Capacity Cabinet PF-117 9. Copy Table
10. Copy Desk 11. Printer Controller Pi3502 12. 8MB/16MB/32 Memory 13. Data Terminal DT-103 14. Finisher FN-109 15. Finisher FN-110 16. Job Tray JS-201 Option Tray JS-100 Not available for the Di200 17. Shift Tray OT-19. Mailbin Finisher FN-504

SPECIFICATIONS

AFR-17
Name Type Duplexing Document Feeder Paper Take-Up: Take-up from top of stack, U-turn feeding Transport: Single-belt transport Turnover: Loop turnover Ejection: Straight ejection Installation Type of Document Mounted on the copier Plain paper:1-Sided mode -- 50 g/m to 110 g/m or 13 to 29 lbs. 2-Sided mode -- 60 g/m to 90 g/m or 16 to 24 lbs. Single Feed mode -- 35 g/m to 200 g/m or 9 to 53 lbs. Detectable Document Sizes Metric Area (Standard) A5 L, A5 C, B5 L, B5 C, A4 L, A4 C, B4 L, A3 L, L, 8-1/413 L Inch Area (Standard) 5-1/28-1/2 C/L, 8-1/211 C/L, 8-1/214L, 1115 L,1117 L Capacity Document Feed Tray: 50 sheets -- 80 g/m or 21 lbs. Document Exit Tray: 50 sheets -- 80 g/m or 21 lbs. Alignment Document Loading Modes Rear Document Edge Guide Face up Mixed Original 1-Sided 2-Sided Single Feed Power Source Power Consumption Dimensions DC 24 V -- supplied from the copier 60 W or less Width 603 mm or 23.7 inches Height 110 mm or 4.33 inches Depth 502 mm or 19.7 inches -- excluding Document Exit Tray Weight Operating Environment 12.0 kg Same as copier
Name Installation Type of Document Detectable Document Sizes Automatic Document Feeder Screwed to the copier Plain paper 5-1/28-1/2L/C, 8-1/211L/C, 8-1/214L, 1117L Capacity 70 sheets max. (50 sheets max when Mix Original Mode): 52.5~81.4 g/m 25 14~22lbs. Alignment Document Loading Document Transport Speed Rear Document Edge Guide Face up 20 sheets/min. (A4C or Letter C) 25 sheets/min. (A4C or Letter C)) 35 sheets/min. (A4C or Letter C)) Modes 1-Sided Original Mixed Original Power Source Power Consumption Dimensions DC24 V, DC5 V (supplied from the copier) 60 W Width Depth Height Weight 21-1/4 19-1/2 3-3/4

13-1/4 lbs

TYPES OF ORIGINALS WHICH SHOULD NOT BE USED
Type of Original Sheets stapled or clipped together Possible Trouble Take-up failure, damaged sheet, defective drive mechanism due to jammed clips. Sheets glued together Sheets folded, torn, or wrinkled Sheets severely curled Take-up failure, damaged sheet Take-up failure, damaged sheet Sheets misfed due to being dog-eared or fed in askew
Type Installation Type of Copy Paper Paper Sizes Switchback and Circulating Duplex Unit Mounted on the right side door of copier Plain paper, recycled paper A5L/C to A3L or 5-1/2 8-1/2L to 11 17L (L: Lengthwise, C: Crosswise) Paper Weight Registration Power Requirements Max. Power Consumption Dimensions 60 to 90 g/m2 or 16 to 24 lbs. Center DC24 V 10 %, DC5 V 5 % (supplied from copier) 21 W Width. Depth Height Weight 2-1/4 16-1/4 10-1/4

4 lbs.

Figure 1: Imaging Unit Identification:

MODEL 4163

L/N I022176H
Table 3: Imaging Unit Interchange Table:
Imaging Unit Part Number 4163-612 4163-602 Di200 ---Di250 Di350 Di250f Di350f Di251 Di351 Di251f Di351f 12 02
IU Model Key 02 = 35cpm 12 =

IU Mfg. Revision

Applicable Models

Imaging Unit Model Key*

* The I/U Model Key must correspond to the actual machine model. Yield Protection Plan Claim Submission: All claims for the Yield Protection Program must be submitted though Minolta PTS Operations following the RA (Return Authorization) Request Procedures outlined in Chapter 8, Section 2 of the Dealer Service Support Book. In addition to the RA form, each item submitted must have: All models: A Failure Control Tag (9004-9005-40) attached to the item, and completed in full. Items with missing or incomplete Failure Control Tags will be returned to the dealership at the dealers expense. For the Di251 Series: A printout of the Service Call Report that is accessible through the Maintenance Mode. For the Di250 Series: A copy of the dealers machine service history that lists the date and meter count related to the failure of the Fusing Unit or Imaging Unit. We are confident that this program is one more element in providing you with the service edge.
WARRANTY Please refer to the Warranty and Special Programs section of theDealer Service Support Manual item number 9005-9005-18.

63(&,),&$7,21

7<3(

'L'L'L

&RQVROH'HVNWRS 7\SH &&' /LQH 6HQVRU 2UJDQLF 3KRWRFRQGXFWRU (OHFWURVWDWLF 'U\ 3RZGHUHG ,PDJH 7UDQVIHU WR 3ODLQ 3DSHU ZLWK D /DVHU GSL ZD\ V\VWHP 0DQXDO )HHG 7UD\ 6LQJOH VW 'UDZHU 6KHHWV 3ODLQ SDSHU 6KHHWV 6SHFLDO SDSHU QG 'UDZHU 6KHHWV 3ODLQ SDSHU &30 &30 6WDQGDUG
25,*,1$/ 6&$11,1* 6<67(0 3+272&21'8&725 &23<,1* 6<67(0 5(62/87,21 3$3(5 )((',1* 6<67(0
(;32685( 6<67(0 '(9(/23,1* 6<67(0 &+$5*,1* 6<67(0 ,0$*( 75$16)(5 6<67(0 3$3(5 6(3$5$7,1* 6<67(0 )86,1* 6<67(0 3$3(5 ',6&+$5*,1* 6<67(0 0$; 25,*,1$/ 6,=( &23< 3$3(5 7<3(
0LUURU 6FDQQLQJ 6OLW ([SRVXUH 07+* 6\VWHP &RPE (OHFWURGH '& 1HJDWLYH &RURQD ZLWK 6FRURWURQ 6\VWHP 5ROOHU ,PDJH 7UDQVIHU 3DSHU 6HSDUDWRU )LQJHUV DQG &KDUJH 1HXWUDOL]LQJ 3ODWH +HDW 5ROOHU &KDUJH 1HXWUDOL]LQJ %UXVK $/ ;/
3DSHU 6RXUFH 7\SH 3ODLQ SDSHU WR JP WR OE 7UDQVSDUHQFLHV 7KLFN SDSHU WR JP WR OE 3RVWFDUG JP OE 5HF\FOHG SDSHU 'LPHQVLRQV 0D[LPXP :LGWK /HQJWK 0LQLPXP :LGWK /HQJWK
VW 'UDZHU PP [ PP [
0DQXDO )HHG 7UD\ PP [ PP [ 5HOLDEO\ IHG
08/7,3/( &23,(6 :$50,1*83 7,0( ),567 &23< 7,0(
'L WR 'L 'L WR 'L VHF RU OHVV 'L 'L VHF RU OHVV $& VW 'UDZHU IXOO VL]H PRGH 'L VHF 'L 'L VHF
&217,18286 &23< 63((' FRSLHVPLQ 6L]H ; / ; / ; / ; & 'L 'L 'L
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

Duplexed Copies Watt Hour B.T.U.

188.20

642.14

13.20 0.94 0.00094

45.04 3.22 0.00322

22700.21 64460.21 17.91

77453.10 219938.22 61.09 64974.49 18.05 221692.96 61.58
MODEL: Di200f TEST SYSTEM Di200f AFR-17 PF-118 PF-119 AD-10 OT-102 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand-by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.12 Min 58.88 Min 7 Single-sided Copies Watt Hour B.T.U. 0.00 0.00 197.80 674.89 173.60 592.32 98.10 334.72 184.70 630.20 0.53 Min 109.00 371.91 24.20 82.57 11.10 37.87 10.90 37.19 0.79 2.71 0.00079 0.00271 55.17 Min/Hr 0.92 0.00 4351.60 164.81 1943.37 16167.42 0.00 14847.66 562.32 6630.76 55163.24

186.50

636.34

12.90 0.92 0.00092

44.01 3.14 0.00314

22462.38 64556.67 17.93

76641.66 220267.36 61.19 65019.53 18.06 221846.63 61.62
MODEL: Di251 TEST SYSTEM Di251 AFR-17 PF-117 PF-118 PF-119 AD-10 FN-109 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.74 Min 58.26 Min 7 Single-sided Copies Watt Hour B.T.U. 0.10 0.34 204.40 697.41 188.40 642.82 105.50 359.97 192.30 656.13 0.48 Min 110.50 377.03 16.00 54.59 3.90 13.31 5.00 17.06 0.14 0.48 0.00014 0.00048 54.90 Min/Hr 0.92 52.20 4496.80 164.02 2257.79 17303.69 178.11 15343.08 559.62 7703.56 59040.18

191.30

652.72

12.30 0.23 0.00023

41.97 0.78 0.00078

27873.95 96399.88 8.76

95105.92 328916.38 29.90 96379.51 8.76 328846.87 29.90
MODEL: Di351f TEST SYSTEM Di351f AFR-17 PF-117 PF-118 PF-119 AD-10 FN-109 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 2.41 Min 57.59 Min 9 Single-sided Copies Watt Hour B.T.U. 0.30 1.02 207.40 707.65 180.50 615.87 128.00 436.74 191.70 654.08 0.25 Min 133.90 456.87 26.90 91.78 11.20 38.21 5.90 20.13 0.21 0.71 0.00021 0.00071 55.34 Min/Hr 0.92 156.60 4562.80 165.32 1928.07 21160.73 534.32 15568.27 564.07 6578.58 72200.39

191.50

653.40

11.00 0.20 0.00020

37.53 0.70 0.00070

27808.20 94989.68 8.64

94881.57 324104.78 29.46 94948.94 8.63 323965.77 29.45
MATERIAL SAFETY DATA SHEET Page:1/6 Product Name: MT TONER 302[]
1. PRODUCT AND COMPANY IDENTIFICATION
MSDS No.:PPC-0723 Issue Date: 11 May 2001
Product Name: MT TONER 302[] [],denoted with an alphabet. used for: Di200, Di200f, Di250, Di250f, Di251, Di251f, Di350, Di350f, Di351, Di351f Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
COMPOSITION / INFORMATION

ON INGREDIENTS

Substance [

Preparation [ X ]

Hazardous Ingredients: Chemical Name: Carbon black (5-10%) CAS No.: 1333-86-4 OSHA Z-Tables(USA): 3.5mg/m3 NTP(USA): Not listed Symbol(EC): Not listed DFG-MAK(GER): III 3B
EEC-No.: 215-609-9 ACGIH-TLV(USA): 3.5mg/m3 IARC Monographs: Group 2B R-Phrase(EC): Not listed Worksafe-TWA(Austl): 3mg/m3

Major Ingredients: [Generic Name] Polyester resin Carbon black Polyolefin wax Magnetite Titanium compound
[CAS No.] +++ 1333-86-4 +++ 1317-61-9 +++
[%] 80-90 5-10 1- 5 1- 5 1- 5
+++: Suppliers confidential information
MATERIAL SAFETY DATA SHEET Page:2/6 Product Name: MT TONER 302[] MSDS No.:PPC-0723 Issue Date: 11 May 2001
3. HAZARDS IDENTIFICATION
Most Important Hazards and Effects of the Products For Human Health: This toner is not classified as a human carcinogen. No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: Dust explosion(like most finely divided organic powders)

4. FIRST-AID MEASURES

Symptoms of Overexposure: No symptoms expected with intended use. Routes of Entry: Eye contact, inhalation, ingestion Information Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air and obtain medical advice. Skin Contact: Flush with gently flowing water (preferably lukewarm) and soap for 15 minutes or until particle is removed. If irritation does occur, obtain medical advice. Eye Contact: Do not allow victim to rub eye(s). Flush with gently flowing water (preferably lukewarm) for 15 minutes or until particle is removed. Have victim look right and left, and, then up and down. If irritation does occur, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye(s). Ingestion: If irritation or discomfort occurs, obtain medical attention immediately. Note to Physician: None
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media: CO2, water spray, foam and dry chemical Extinguishing Media to Avoid: Full water jet Special Firefighting Procedures: None Fire and Explosion Hazards: If dispersed in air, like most finely divided organic powders, may form an explosive mixture. Protection of Firefighters: Use self-contained breathing apparatus(SCBA).
6. ACCIDENTAL RELEASE MEASURES
Personal Precautions: None Environmental Precautions: None Methods for Cleaning Up: Wipe off with paper or cloth. DO NOT use vacuum cleaner when a large amount is released. It, like most finely divided organic powders, may create a dust explosion.
MATERIAL SAFETY DATA SHEET Page:3/6 Product Name: MT TONER 302[] MSDS No.:PPC-0723 Issue Date: 11 May 2001

7. HANDLING AND STORAGE

Handling Technical Measures/Precautions: None Safe Handling Advice: Try not to disperse the particles. Storage Technical Measures: None Storage Conditions: Keep container closed. Store in a cool and dry place. Keep out of reach of children Incompatible Products: None Packing Materials : Bottles or Cartridge designated by Minolta.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures Ventilation: None required with intended use. Control Parameters(As total dust) OSHA-PEL(USA): 15mg/m3 ACGIH-TLV(USA): 10mg/m3 DFG-MAK(GER): 6mg/m3 Worksafe-TWA(Austl.): 10mg/m3 Personal Protective Equipment None required when used as intended in Minolta equipment. For use other than normal customer-operating procedures (such as in bulk toner processing facilities), goggles and respirators may be required. Hygiene Measures: Wash hands after handling.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance Physical State: Solid Form: Powder Color: Black Odor: Faint odor Particle Size(m): 5 - 15 PH/Boiling Point(C): Not applicable Melting Point(C): No data available Softening Point(C): 110 - 125 * Flash Point(C): Not applicable Ignition Temperature(C): > 400 * Explosion Properties: No data available Vapor Pressure: Not applicable Density(g/cm): 1.2 * (bulk density: 0.41 *) Solubility in water: Negligible Oxidizing Properties: No data available Partition Coefficient, n-Octanol/Water: Not applicable
MATERIAL SAFETY DATA SHEET Page:4/6 Product Name: MT TONER 302[] MSDS No.:PPC-0723 Issue Date: 11 May 2001
10. STABILITY AND REACTIVITY
Stability: Stable [ X ] Unstable [ ] Hazardous Reactions: Dust explosion, like most finely divided organic powders. Conditions to avoid: Electric discharge, throwing into fire. Materials to Avoid: Oxidizing materials. Hazardous Decomposition Products: CO, CO2
11. TOXICOLOGICAL INFORMATION
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data Acute Toxicity: Inhalation, LC50(mg/l): >1.93 (Rats,4hour) * (This was the highest attainable concentration.) Ingestion(oral), LD50(mg/kg): >2000 (Rats) * Dermal, LD50(mg/kg): No data available Eye irritation: Slight conjunctival irritation (Rabbits) * Skin irritation: Non irritant (Rabbits) * Skin sensitizer: Non sensitizer (Guinea pig) * Mutagenicity:(AMES test) Negative * (*= Based on data for other Minolta Products with similar ingredients) Local Effects: see Chronic Toxicity or Long term Toxicity Chronic Toxicity or Long Term Toxicity: Prolonged inhalation of excessive dust may cause lung damage. It is attributed to lung overloading, a generic response to excessive amounts of any dust retained in the lungs for a prolonged interval. Use of this product, as intended, does not result in inhalation of excessive dust. In a study in rats by chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of rats in the high concentration(16mg/m) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle(4mg/m) exposure group. But no pulmonary change was reported in the lowest(1mg/m) exposure group, the most relevant level to potential human exposures. Carcinogenicity IARC Monographs/NTP(USA)/OSHA Regulated(USA): Not listed In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This evaluation is given to Carbon Black for which there is inadequate human evidence, but sufficient animal evidence. The latter is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce

MATERIAL SAFETY DATA SHEET Page:5/6 Product Name: MT TONER 302[] MSDS No.:PPC-0723 Issue Date: 11 May 2001 particle overload of the lung. Studies performed in animal models other than rats have not demonstrated an association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.
12. ECOLOGICAL INFORMATION
No data are available on the adverse effects of this material on the environment.
13. DISPOSAL CONSIDERATION
Appropriate Methods of Disposal Preparation(community provisions): Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations. Contaminated Packaging: Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations. Precautions: Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage.
14. TRANSPORT INFORMATION
Special Precautions: None Information on Code and Classifications According to International Regulations UN Classification: None
15. REGULATORY INFORMATION
US Information Information on the label: Not required TSCA(Toxic Substances Control Act): All chemical substances in this product comply with all applicable rules or order under TSCA. SARA(Superfund Amendments and Reauthorization Act) Title III 302 Extreme Hazardous Substance: None 311/312 Hazard Categories/313 Reportable Ingredients: None California Proposition 65: This product contains no chemical substances subject to California Proposition 65.
MATERIAL SAFETY DATA SHEET Page:6/6 Product Name: MT TONER 302[] MSDS No.:PPC-0723 Issue Date: 11 May 2001 EU Information Information on the label (88/379/EEC and 67/548/EEC): Symbol & Indication: Not required R-Phrase: Not required S-Phrase: Not required 76/769/EEC: All chemical substances in this product comply with all applicable rules or order under 76/769/EEC.

16. OTHER INFORMATION

NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 1 Flammability: 1 Reactivity: 0 HMIS Rating: The National Paint and Coating Association(USA): Health: 1 Flammability: 1 Reactivity: 0 Recommended Uses: Toner for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co.,Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist. Literature References: ANSI Z400.1-1993 ISO 11014-1 Commission Directive 91/155/EEC IARC(1996): IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65, Printing Process and Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149-261 H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-299.

MATERIAL SAFETY DATA SHEET Page:1/6 Product Name: STARTER IN IMAGING UNIT
MSDS No.:PPC-1693 Issue Date: 11 May 2001
Product Name: STARTER IN IMAGING UNIT used for: Di200, Di200f, Di250, Di250f, Di251, Di251f, Di350, Di350f, Di351, Di351f Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
2. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous Ingredients: Chemical Name: Carbon black (1- 5%) CAS No.: 1333-86-4 OSHA Z-Tables(USA): 3.5mg/m3 NTP(USA): Not listed Symbol(EC): Not listed DFG-MAK(GER): III 3B
Major Ingredients: [Generic Name] Magnetite Polyester resin Polyester resin Styrene acrylate copolymer Carbon black
[CAS No.] 1317-61-9 +++ +++ +++ 1333-86-4
[%] 60-70 10-20 10-20 1- 5 1- 5
MATERIAL SAFETY DATA SHEET Page:2/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001
Most Important Hazards and Effects of the Products For Human Health: This starter is not classified as a human carcinogen. No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: Dust explosion(like most finely divided organic powders)
MATERIAL SAFETY DATA SHEET Page:3/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001
Appearance Physical State: Solid Form: Powder Color: Black Odor: Faint odor Particle Size(m): 5 - 15(toner) about 30 (carrier) PH/Boiling Point(C): Not applicable Melting Point(C): No data available Softening Point(C): 110 - 125 * Flash Point(C): Not applicable Ignition Temperature(C): > 400 * Explosion Properties: No data available Vapor Pressure: Not applicable Density(g/cm): 4 (bulk density: about 1.3) Solubility in water: Negligible Oxidizing Properties: No data available Partition Coefficient, n-Octanol/Water: Not applicable
MATERIAL SAFETY DATA SHEET Page:4/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data Acute Toxicity: Inhalation, LC50(mg/l): No data available Ingestion(oral), LD50(mg/kg): >2000 (Rats) * Dermal, LD50(mg/kg): No data available Eye irritation: Slight conjunctival irritation (Rabbits) * Skin irritation: Non irritant (Rabbits) * Skin sensitizer: Non sensitizer (Guinea pig) * Mutagenicity:(AMES test) Negative * (*= Based on data for other Minolta Products with similar ingredients) Local Effects: see Chronic Toxicity or Long term Toxicity Chronic Toxicity or Long Term Toxicity: Prolonged inhalation of excessive dust may cause lung damage. It is attributed to lung overloading, a generic response to excessive amounts of any dust retained in the lungs for a prolonged interval. Use of this product, as intended, does not result in inhalation of excessive dust. In a study in rats by chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of rats in the high concentration(16mg/m) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle(4mg/m) exposure group. But no pulmonary change was reported in the lowest(1mg/m) exposure group, the most relevant level to potential human exposures. Carcinogenicity IARC Monographs/NTP(USA)/OSHA Regulated(USA): Not listed In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This evaluation is given to Carbon Black for which there is inadequate human evidence, but sufficient animal evidence. The latter is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung.

MATERIAL SAFETY DATA SHEET Page:1/5 Products Name: PHOTOCONDUCTOR
MSDS No.: DPO-0243 Issue Date: 11 May 2001
Product Name: PHOTOCONDUCTOR used for: Di200, Di250, Di350, Di200f, Di250f, Di350f, Di251, Di351, Di251f, Di351f Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
2. COMPOSITION / INFORMATION

INGREDIENTS

Hazardous Ingredients: None present
Major Ingredients: [Generic Name] Substrate Aluminum drum Coating layer Binder resin Photosensitive material Pigment

[CAS No.] +++

[%] >97 < 3

+++ +++ +++

MATERIAL SAFETY DATA SHEET Page:2/5 Products Name: PHOTOCONDUCTOR
Most Important Hazards and Effects of the Products For Human Health: No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: None
Symptoms of Overexposure: No symptoms expected with intended use. Routes of Entry: None Information Inhalation: No treatment Skin Contact: No treatment Eye Contact: No treatment Ingestion: No treatment Note to Physician: None

is is is is

required. required. required. required.
Suitable Extinguishing Media: Extinguishing Media to Avoid: Special Firefighting Procedures: Fire and Explosion Hazards: explosive hazards. Protection of Firefighters:
CO2, water, foam and dry chemical None None This material has no unusual fire No special equipment is required.
Personal Precautions: Environmental Precautions: Methods for Cleaning Up:
Not applicable with intended use. Not applicable with intended use. Not applicable with intended use.
Handling Technical Measures: None Precautions: This product will be scorched in the case of fire. Safe Handling Advice: None. Storage Technical Measures: None Storage Conditions: Keep and Store in a cool and dry place. Incompatible Products: None Packing Materials: Cardboard box designated by Minolta.
MATERIAL SAFETY DATA SHEET Page:3/5 Products Name: PHOTOCONDUCTOR
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures Ventilation: None required with intended use. Control Parameters OSHA-PEL(USA): Not Applicable DFG-MAK(EC): Not Applicable ACGIH-TLV(USA): Not Applicable Worksafe-TWA(Austl): Not Applicable
Personal Protective Equipment None required when used as intended in Minolta equipment. Hygiene Measures: Wash hands after handling.

DiALTA Di 251(f) / Di 351(f)

Copier specifications

Copier system Laser electrostatic Type Console/stationary platen Resolution 600 x 600 dpi Halftones 256 gradations Type of originals Sheets, book, 3-D objects Original size Max. A3 Copy size A3 to A6 Copy speed 25 copies / min.: Di251(f) 35 copies / min.: Di351(f) 1st copy Less than 5.8 sec.: Di251(f) Less than 4.6 sec.: Di351(f) Duplex Option Di251(f) Standard Di351(f) Memory 32 MB standard (120 pages*) Max. 64 MB (280 pages*) Exposure control Automatic, manual & photo Paper feeding system 2 front-loading paper drawers (250-sheet + 500-sheet)

* at 3% coverage

Printer specifications
Print speed 25 ppm (A4 crosswise, simplex, multi-printing) for Di251(f) 35 ppm (A4 crosswise, simplex, multi-printing) for Di351(f) Resolution 600 x 600 dpi Paper size A3 A6 Commands PCL 5e, PCL6 (standard) PostScript 3 (option) Interface IEEE-1284, Ethernet Network Card Memory 16 MB standard Max.144 MB Support operation system Windows 95, 98, 2000, Windows NT 4.0, Mac OS system 7.5.3 or later
Max. numbers stored 500 One-touch/speed-dial numbers Max. 300 (out of 500 speed dial numbers) Program keys Max. 30 (out of 300 one-touch-keys) Special features Broadcasting Batch transmission Closed network receiving Delayed transmission Mailbox receiving Memory receiving Quick memory transmission Polling Stamp function 2-to-1 transmission 2-sided transmission
Sheet bypass Single sheet bypass Multiple copy for Di251(f) for Di351(f) Input materials Plain paper (60 90g/m2) Manual feed (up to 160 g/m2) Warm-up time Less than 60 sec. for Di251(f) Less than 70 sec. for Di351(f) Magnification 0.254.00 (in 0.1% steps) Developing system I/C system Photo conductor OPC drum Power consumption 850 W ( Di251(f)) 1,050 W ( Di351(f)) Dimensions (W x D x H, mm) 566 x 707 x 635 for Di251(f) 616 x 707 x 635 for Di351(f) Weight 59 kg for Di251(f) 60 kg for Di351(f) Accessories 70 - sheet automatic document feeder (AF-9) 50 - sheet automatic duplex feeder (AFR-17) 1,250 - sheet finisher (FN-110) 3,250 - sheet finisher (FN-109) 3rd tray (JS-100) Mailbin finisher (FN-504) 2-bin tray (JS-200/JS-201) Shift tray (OT-100) only for Di251(f) 2,500-sheet large capacity cassette (PF-117) 500-sheet universal paper cassette (PF-118) 500-sheet fixed paper cassette (PF-119)

Scan specifications

Scan speed Up to 35 originals per minute Scan modes Scan-to-PC Scan-to-FTP Scan-to-e-mail Scan resolution 600 x 600 dpi

Fax specifications

Min. transmission time 3 sec. ( ITU No.1) Max. modem speed 33.6 kbps Coding MH, MR, MMR, JBIG Scan resolution Max. 400 x 400 dpi Compatibility G3/Super G3 Memory capacity in fax mode 1,400/max. 2,000 pages Halftones 256 gradations

i iss weil em

w elt z e i c h e

und re

n weltzeiche

Jur y Um

Minolta does not warrant that any prices or specifications mentioned will be error-free. Specifications are subject to change without notice. All other brand and product names may be registered trademarks or trademarks of their respective holders and are hereby acknowledged. Printed in UK on chlorine-free bleached paper. Di251f/351f/v1/09-01

lin gg erecht

Minolta UK Limited Rooksley Park Precedent Drive Milton Keynes MK13 8HF Phone Fax www.minolta.co.uk
For further information please contact

DiALTA Di251(f)/Di351(f)

www.minolta.co.uk The essentials of imaging

Workgroup wizardry

DiALTA Di 251(f) / Di 351(f) The new 5-in-1 office solution
If your office is crowded with machines like a separate copier, desktop printer, fax or scanner, youre probably well aware of the noise they make and the space they take up. Much ado about nothing? Hardly, especially if you consider that all this hardware frequently has nothing but basic functions to offer. Anyway, why should you pay extra for the print engine of a stand-alone printer when our digital copier can print as well? And why should you spend money on a desktop fax when our digital copier can fax as well? And why should you invest in a flatbed scanner when our digital copier offers a high-quality scanning function? After all, multitasking is common practice outside the office do you listen to cassettes, CDs, DVDs and radio on your stereo? With the launch of the DiALTA Di251(f) and Di351(f), two new black-and-white digital multitasking devices, Minolta offers you the ultimate 5-in-1 office solution.

Copying

As many as 25 or 35 pages a minute respectively and various creative editing functions

Printing

As many as 25 or 35 pages a minute respectively from any workplace in your business

Faxing

High-speed transmission at 33.6 kbps

Scanning

High-quality scanning at 600 x 600 dpi via the document feeder or platen glass

E-mailing

Sending originals directly as e-mails with no need to attach them first

with five big benefits 1

Productivity boosted
The benefits of multifunctionality copying, printing, faxing, scanning and e-mailing do not come at the expense of performance. The new Di251(f) and Di351(f) give you 25 or 35 pages a minute, respectively, as digital copiers or printers plus the added benefit of functioning as fast workgroup faxes and productivity-boosting scanners.

Acquisition costs cut

Either the Di251(f) or Di351(f) can provide your office a high-quality copier, high-speed printer, workgroup fax and document scanner. So as a one-off acquisition, they give you better value for money than four individual machines.
Digital technology has opened the door to enhanced performance and productivity in todays office

Running costs reduced

The hidden cost per page of printing via a desktop printer is remarkably high. Have you ever calculated the total cost per page of a desktop printers consumables? Both the Di251(f) and Di351(f) offer the added bonus of printing at the significantly lower price per page of copying.
environments. DiALTA, a word derived from digital intelligence and
lealt (which means loyalty in
Italian), is the brand name for Minoltas broad range of digital output devices. Both aspects of this brand name reflect Minoltas devotion to the principle of

Single service partner

Different service partners and consumables for your copying, printing and faxing? A troublesome and rather expensive idea. The intelligent solution is a single service partner and uniform consumables for all three functions.
customer satisfaction and desire to ensure maximum images quality and in in

Space saved

As multifunctional digital systems, the Di251(f) and Di351(f) take up considerably less space than four individual stand-alone copiers, printers, scanners and fax machines would do.

reproducing

managing and transmitting data to computer-based networks.
Bring a quality copier into your workgroup

Copiers small enough for workgroup use are frequently far too slow and lack the more sophisticated functions needed in todays fast-moving business world. And a more powerful copier is usually situated too far away down the corridor or at the other end of the office. But now Minolta offers you the ideal solution a choice of two fast, functional, high-quality copiers designed for workgroup use: the 25-cpm DiALTA Di251(f) and the 35-cpm DiALTA Di351(f). The latest generation of monochrome digital copiers from Minolta requires hardly any space and makes little or no noise ideal qualities for workgroup use. At the same time, the machines criss-cross sorting function makes bulky, add-on sorting units superfluous yet still ensures carefully sorted sets of copies. But space-saving speed is not everything. The Di251(f) and Di351(f) deliver the kind of crisp, clear copies only first-class imagereproduction technology can provide and with a whole host of tried-andtested features, they are also extremely reliable machines.

Ease of use

convenience
Large touch panel display with fewer buttons or keys and helpful user support functions plus userreplaceable consumables

Efficient sorting

Sorts copies clearly in criss-cross fashion just as you would by hand

productivity

Less wastage Voluminous paper input
Automatic document feeder for up to 70 sheets, max. paper input capacity of up to 3,750 sheets
Time-saving output features
Recall function allows settings to be checked before producing multicopies, automatic image rotation ensures copies are produced the right way round following the automatic papersource switch that occurs when paper in a cassette runs out

Digital excellence

Finishing functionality for up to 3,250 sheets with online punching and stapling or five-bin-sorter for user-specific print-job separation

Digital efficiency

State-of-the-art image processing through electronic data transfer

Image quality

Scan once, copy many function reduces operating time and wear and tear on machine

Copy economy

High resolution (600 x 600 dpi) and 256 halftones for crisp, clear reproduction

quality

flexibility
Wide choice of formats Sophisticated scanning

Stackless duplex unit standard in Di351, optional in Di251
From A6 to A3 and up to 160 g/m2 with 6-way paper loading
Documents scanned separately, e.g. via the ADF and platen glass, and then merged for online finishing
Go for speed and sophistication in printing
Are desktop printers really such a good idea in workgroup environments? You print a document head for the nearest copier if you Besides, which desktop printer offers you features such as duplex, stapling or punching? A vital advantage if your documents are to be well presented. printer such as the new Di251(f) or Di351(f) from Minolta is a much more sensible solution. These new monochrome machines are specifically designed to meet a workgroups needs, not only providing offering numerous useful special the advantages are obvious. You can print all the document sets you need fast and enjoy all the finishing and image-processing functions you want, e.g. punching, stapling, sorting, duplex, A3 printing, So you get a workgroup printer with all the sophisticated features of a digital copier.
on a basic desktop device but have to fast output (25 or 35 ppm) but also need numerous copies for a meeting. functions. In a workgroup environment
To meet these needs, a digital copier- 2-in-1 or 4-in-1 processing.

Lower costs

Printing at the cost per page of copying much cheaper than desktop printers

Network management

New version of Minoltas PageScope software for easier administration of a networked environment Numerous pre-installed PostScript and PCL fonts and an extra HDD for storing additional fonts
Reduced network data transfer

User-friendly output

Time-saving speed
Mailbin sorters with five output bins for job-specific sorting ideal for workgroup environments
Crisp, clear reproduction
The processing power to deliver 25 or 35 pages per minute, respectively
Efficient document production
Perfect images, text and graphics through standard PCL 6 and PostScript 3
Transmit once, print many function saves time as well as PC and network resources

Networkability

High resolution (600 x 600 dpi) and 256 halftones
Printer accessible from any PC in your corporate network

Compatibility

Support for any Windows system and Mac OS (7.5.3 or later)

Enjoy more efficient faxing and better scanning
Despite the increasing use of e-mails in communicating with customers, no office or workgroup can afford to be without a fax machine. But as fewer documents are faxed these days, does a standalone fax machine still make business sense? The new DiALTA Di251f and Di351f (with their standard fax function) are specifically designed to provide workgroups with efficient and economical faxing facilities. The fax function, which is part of the 5-in-1 office solution these machines provide, not only reduces hardware investment costs but also offers more sophisticated features such as faxing from books or A3 originals.
Large memory Higher speeds
Fast one-touch dialling and parallel transmission to scan a new document while transmitting the last one No documents lost even during simultaneous copying/printing

Versatility

Documents, e.g. books and 3-D originals of up to A3 format, scanned in via the platen glass or document feeder
Clearly arranged touch panel instead of innumerable keys
400 dpi and FineArt smoothing for 600 dpi-quality images and a choice of transmission modes for different kinds of originals
Why should anyone invest in a stand-alone scanner when the new Di251(f) and Di351(f) from Minolta are equipped with a laser scanner and automatic document feeder? Especially as these machines have much more to offer than your average flatbed scanner, e.g. automatic feed of up to 70 pages, as many as 35 pages (Di351f) scanned per minute and automatic scanning of documents printed on both sides. As networked multitasking machines, they also enable scanned documents to be archived or e-mailed extremely useful in any workgroup environment.

Versatility Speed

Documents fed in at up to 35 pages per minute (Di351f), and individually scanned in approx. 0.6 sec.
Originals, e.g. books and 3-D originals of up to A3 format, scanned in via the platen glass or document feeder
Scan manager The flexibility factor Image quality
Electronic document management made easier by Minoltas PageScope Cabinet software

Scan-to-PC, scan-to-FTP and scan-to-e-mail
High resolution (600 x 600 dpi) with a choice of scan modes for different kinds of originals
Choose the configuration you need
The new DiALTA Di251(f) and Di351(f) from Minolta come in a wide variety of configurations so your workgroup or office can choose precisely the machine it needs. This wide choice of customised configurations highlights the Minolta principle of putting the customer first: what you want is what you get. The diagram shows just how much choice you have with the Di251(f) and Di351(f) and if you need any assistance in finding the right configuration, simply get in touch with your local Minolta representative.

Output tray JS-100

Finisher FN -109

Finisher FN -110

Finisher FN - 504

Document feeder AF -9

Document feeder AFR -17

Platen cover

Offset tray OT -100 Memory
Job tray JS - 200 / JS - 201
Duplex unit standard with DI 351/ f

Controller Pi 3502

NIC HDD Memory PS3 / scan kit
Universal cassette PF - 118 or fixed cassette PF - 119

Copier table CT - 2

Large capacity cassette PF - 117

Large desk

Small desk