Name Installation Type of Document Detectable Document Sizes Automatic Document Feeder Screwed to the copier Plain paper 5-1/28-1/2L/C, 8-1/211L/C, 8-1/214L, 1117L Capacity 70 sheets max. (50 sheets max when Mix Original Mode): 52.5~81.4 g/m 25 14~22lbs. Alignment Document Loading Document Transport Speed Rear Document Edge Guide Face up 20 sheets/min. (A4C or Letter C) 25 sheets/min. (A4C or Letter C)) 35 sheets/min. (A4C or Letter C)) Modes 1-Sided Original Mixed Original Power Source Power Consumption Dimensions DC24 V, DC5 V (supplied from the copier) 60 W Width Depth Height Weight 21-1/4 19-1/2 3-3/4

13-1/4 lbs

TYPES OF ORIGINALS WHICH SHOULD NOT BE USED
Type of Original Sheets stapled or clipped together Possible Trouble Take-up failure, damaged sheet, defective drive mechanism due to jammed clips. Sheets glued together Sheets folded, torn, or wrinkled Sheets severely curled Take-up failure, damaged sheet Take-up failure, damaged sheet Sheets misfed due to being dog-eared or fed in askew
Type Installation Type of Copy Paper Paper Sizes Switchback and Circulating Duplex Unit Mounted on the right side door of copier Plain paper, recycled paper A5L/C to A3L or 5-1/2 8-1/2L to 11 17L (L: Lengthwise, C: Crosswise) Paper Weight Registration Power Requirements Max. Power Consumption Dimensions 60 to 90 g/m2 or 16 to 24 lbs. Center DC24 V 10 %, DC5 V 5 % (supplied from copier) 21 W Width. Depth Height Weight 2-1/4 16-1/4 10-1/4

4 lbs.

PF-118 PF-119
Name PF-118 (Universal Cassette) PF-119 (Fixed Paper Size Cassette) Type Installation Type of Copy Paper Paper Sizes Add-on paper source unit Mounted beneath Upper Drawer of copier Plain paper, recycled paper B5L/C to A3L or 8-1/2 x 11L/C to 11 x 17L (L: Lengthwise, C: Crosswise) Paper Weight Registration Capacity Power Requirements Max. Power Consumption Dimensions Width. 21 Depth. 22-1/4 Height. 5 Weight Universal Cassette 18-3/4 lbs. Fixed Paper Size Cassette 19 lbs. 60 to 90 g/m2 or 16 to 24 lbs. Center 550 sheets DC24 V 10 %, DC5 V 5 % (supplied from copier) 16.8 W

PF-117

Type Type of Paper Paper Size Front Loading Type LCC Plain paper, recycled paper B5C, A4C, Letter C (L: Lengthwise, C: Crosswise) Paper Weight Registration Paper Capacity Power Requirements Dimensions 60 to 90 g/m2 or 16 to 24 lbs. Center 2,750 sheets (1375 X 2) DC24 V 10 %, DC5 V 5 % (supplied from copier) Width. 21 in Depth. 22-1/4 in Height. 11-1/4 in Weight 37-1/2 lbs.

FN-109

FN-110 JS-100
Multi Staple Finisher (FN-109) Single Staple Finisher (FN-110) Freestanding Non-Sort Non-Sort, Sort, Group Sort Staple, Group Staple Hole Punch (FN-109)

Installation Modes

Copy Medium
Mode Paper Type Plain paper Paper Size Paper Weight Capacity 250 sheets: A4C, 8-1/(80 g/m2, 20 lb) 150 sheets: except A4C, 8-1/(80 g/m2, 20 lb) (Height: up to 36 mm, 1-1/2) Finishing Tray Max. No. of Sheets to be Stapled

Recycled paper

A3L to A6L to 5-1/2 81/2

60 to 90 g/mto 24 lb

Non-Sort Thick paper Transparencies Translucent paper Postcards Envelopes

1st Tray

20 sheets FN-109: 3,000 sheets (A4L, 11 81/2 or smaller: 80 g/m2, 20 lb) 1,500 sheets (B4L, 8-1/or larger: 80 g/m2, 20 lb) FN-110: 1,000 sheets (A4L, 11 81/2 or smaller: 80 g/m2, 20 lb) 500 sheets (B4L, 8-1/or larger: 80 g/m2, 20 lb)

Plain paper

Sort, Group Recycled paper Thick paper Plain paper

A3L to B5L/C to 8-1/2 11

60 to 256 g/mto 68 lb

Elevator Tray

Sort Staple, Group Staple
FN-109: 50 sheets (60 to 90 /m2, 16 to 24 lb) FN-110: 30 sheets (60 to 80 /m2, 16 to 20 lb)

A3L to B5L to 8-1/2 11

Hole Punch
Plain paper Recycled paper

1st Tray, Elevator Tray

63(&,),&$7,216
-6 -RE 7UD\ 6WUDLJKW HMHFWLRQ 3DSHU 3DWK 6ZLWFKLQJ 7\SH -RE 7UD\ 27 6KLIW 7UD\ 6WUDLJKW HMHFWLRQ -RE 2IIVHW 7UD\
,QVWDOODWLRQ &RS\ 0HGLD
0RXQWHG WR FRSLHU 3ODLQ SDSHU ZHLJKLQJ WR JP RU WR OE 2+3 WUDQVSDUHQFLHV KHDY\ SDSHU WR JP WR OE SRVWFDUGV HQYHORSHV
-6 -RE 7UD\ $ WR $/ WR / 27 6KLIW 7UD\ $ WR $/ WR / LQ 1RQ6RUW PRGH $ WR $& WR & LQ 6RUW RU *URXS PRGH

&DSDFLW\

3ODLQ SDSHU JP OE -6 -RE 7UD\ 8SSHU ([LW 7UD\ $& /HWWHU & 6KHHWV ([FHSW $& /HWWHU & VKHHWV +HLJKW XS WR /RZHU ([LW 7UD\ $& /HWWHU & VKHHWV ([FHSW $& /HWWHU & VKHHWV ([FHSW +HLJKW XS WR $& /HWWHU & VKHHWV 27 6KLIW 7UD\ ([LW 7UD\ $& /HWWHU & VKHHWV +HLJKW XS WR 7UDQVSDUHQFLHV WKLFN SDSHU SRVWFDUG -6 -RE 7UD\ /RZHU ([LW 7UD\ VKHHWV 27 6KLIW 7UD\ ([LW 7UD\ VKHHWV
3RZHU 5HTXLUHPHQWV 0D[ 3RZHU &RQVXPSWLRQ 'LPHQVLRQV :HLJKW

'& 9 : RU OHVV

'& 9
VXSSOLHG IURP FRSLHU -RE 7UD\
: ' + : ' + -6 -RE 7UD\

6KLIW 7UD\

OEV LQFOXGLQJ EUDFNHW
27 6KLIW 7UD\ OEV LQFOXGLQJ EUDFNHW

SPECIFICATIONS FN-504

Type Installation Modes
Mode Non-Sort Paper Type Plain paper
Auto Feeder Multi Staple Finisher Freestanding Non-Sort, Sort/Group, Staple, Hole Punch
Paper Size Inch Areas: 5-1/2 8-1/2 to Metric Areas: A6L to A3L Weight Max. Capacity No. of Sheets to be Stapled
60 to 90 g/m 500 sheets: 16 to 24 lb A4C, 8-1/(80 g/m, 20 lb) 250 sheets: except A4C, 8-1/(80 g/m, 20 lb) (Hight: up to 73 mm, 2-3/4)
Recycled paper Thick paper OHP transparencies Translucent paper Postcards Envelopes Sort/Group Plain paper
20 sheets 10 sheets 10 sheets 10 sheets 10 sheets Inch Areas: 60 to 90 g/m 1000 sheets: 8-1/2 11, 16 to 24 lb A4L, 11 8-1/2 or smaller 11 8-1/2, (80 g/m, 20 lb) 8-1/2 14, 500 sheets: Metric Areas: B4L, 8-1/or larger A4C, A4L, A3L (80 g/m, 20 lb) Mail Bin: A4C , 8-1/(200 sheets/bin) except A4C, 8-1/(100 sheets/bin) Inch Areas: 60 to 80 g/m 8-1/2 11, 8-1/2, to 20 lb 8-1/2 14, Metric Areas: A4C, A4L, A3L Inch Areas: 60 to 90 g/m (3 holes) 16 to 24 lb 8-1/2 11, (2 holes) 8-1/2 11, 11 8-1/2, 8-1/2 14, Metric Areas: A4C, A4L, A3L Max. 50 sheets (60 to 80 g/m, 16 to 20 lb)

Staple

Recycled paper Plain paper
Recycled paper Hole Punch Plain paper
Registration No. of Holes Power Requirements Power Consumption Dimensions
Center Inch Areas: 3 holes (2 holes is an option); DC24 V (supplied from copier) 63 W Width: 25-3/4 Height: 38-3/4 Depth: 24-1/2

Weight

109 lbs.
Mode Paper Type Plain paper A3L to A6L to 5-1/2 81/2 Paper Size Paper Weight Capacity Finishing Tray Max. No. of Sheets to be Stapled
250 sheets: A4C, 8-1/(80 g/m2, 20 lb) 150 sheets: 60 to 90 g/m2 except A4C, 16 to 24 lb 8-1/(80 g/m2, 20 lb) (Height: up to 1st Tray 36 mm, 1-1/2)

Non-Sort

Thick paper Transparencies Translucent paper Postcards Envelopes
Sort Staple, Group Recycled paper Staple

60 to 90 g/m 16 to 24 lb

Plain paper Hole Punch Recycled paper
PRECAUTIONS FOR INSTALLATION

Installation Site

To ensure safety and utmost performance of the copier, the copier should NOT be used in a place: Where it will be subjected to extremely high or low temperature or humidity. Where it will be subjected to sudden fluctuations in either temperature or humidity. Which is exposed to direct sunlight. Which is in the direct air stream of an air conditioner, heater, or ventilator. Which has poor ventilation or is dusty. Which does not have a stable, level floor or where it will receive undue vibration. Which is near any kind of heating device. Which is near volatile flammables (thinner, gasoline, etc.). Where it may be splashed with water. Which puts the operator in the direct stream of exhaust from the copier. Where ammonia gas might be generated.

Power Source

If any other electrical equipment is sourced from the same power outlet, make sure that the capacity of the outlet is not exceeded. Use a power source with little voltage fluctuation. Never connect by means of a multiple socket any other appliances or machines to the outlet being used for the copier. Ensure that the copier does not ride on the power cord or communication cable of other electrical equipment, and that it does not become wedged into or underneath the mechanism. Make the following checks at frequent intervals: Is the power plug abnormally hot? Are there any cracks or scrapes in the cord? Has the power plug been inserted fully into the outlet? Does something, including the copier itself, ride on the power cord? Use an outlet with a capacity of 120 to 127 VAC, 15 A or more.

Grounding

Always ground the copier to prevent receiving electrical shocks in the case of electrical leakage. Connect the ground wire to the ground terminal of the outlet or a grounding contact which complies with the local electrical standards. Never connect the ground wire to a gas pipe, the ground wire for a telephone, lightning arrester, or a water pipe for fear of fire and electrical shock.

OTHER PRECAUTIONS

Use the following precautions when performing service jobs for a copier that uses a laser. When a service job needs to be performed in the laser beam path, such as when working around the printerhead or PC Drum, be sure first to unplug the power cord of the copier from the outlet. If the job requires that the power cord be left plugged in, observe the following precautions. 1. Take off your watch, ring and any other reflective object and wear laser protective goggles. 2. Keep users away from the job site. 3. Do not bring a highly reflective tool into the laser beam path during the service job.

PUBLICATIONS PRICE LIST

Di200/Di251/Di351 MODEL Di200/200f/Di251/251f/Di351/351f FN-504 Di351 Di251 Di200 AFR-17 for Di200/251/351 FN-109 FN-110 JS-201 OT-102 PF-119 AD-15 Di200/Di251/Di351 Di200/Di251/Di351 Di200/Di251/Di351 Di200/Di251/Di351 Di200/Di251/Di351 Di200/200f/Di251/251f/Di351/351f PF-117 PF-118 Di200/200f/Di251/251f/Di351/351f Di200/200f/Di251/251f/Di351/351f Di200f/Di251f/Di351f MODEL Di200f/Di251f/Di351f Di200f/Di251f/Di351f Di251f Di200f Di351f Di200f/Di251f/Di351f Di200f/Di251f/Di351f Di200f/Di251f/Di351f Di200f/Di251f/Di351f 7669-4011-15 ITEM NUMBER 7667-4011-04 7665-4612-22 7665-4011-21 7665-4012-21 7665-4013-21 7665-4490-21 7665-4653-21 7665-4654-21 7665-4602-21 7665-4491-21 7665-4658-22 7665-4661-21 7661-4011-11 7662-4011-11 7663-4613-11 76664011-01 7664-4011-01 7666-4011-21 7665-4659-21 7665-4658-21 7668-4011-25 7667-4011-13 7669-4011-16 ITEM NUMBER 7664-4017-02 7666-4017-01 7665-4016-21 7665-4017-21 7665-4015-21 7661-4015-11 7661-4968-21 7664-4015-01 7666-4015-01 MANUAL KIT CONTAINS: DESCRIPTION MAINTENANCE CARD W/OPTIONS PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL GENERAL SERVICE MANUAL FIELD SERVICE MANUAL OPTION SERVICE MANUAL QUICK GUIDE OPERATOR MANUAL PAGESCOPE PLUG AND PRINT QUICK GUIDE PARTS MANUAL PARTS MANUAL PRODUCT INFORMATION GUIDE RECOMMENDED TRUNK INVENTORY MANUAL KIT CONTAINS: DESCRIPTION OPERATOR MANUAL QUICK GUIDE PARTS MANUAL PARTS MANUAL PARTS MANUAL SERVICE MANUAL NETWORK APPLICATION KIT SERVICE MANUAL NETWORK APPLICATION OPERATOR MANUAL NETWORK APPLICATION QUICK GUIDE $218.00 DEALERCOST $4.50 $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $5.00 $10.00 $20.00 $20.00 $10.00 $10.00 $10.00 $9.00 $9.00 $20.00 $.50 $97.00 DEALERCOST $10.00 $10.00 $9.00 $9.00 $9.00 $20.00 $10.00 $10.00 $10.00

SERVICE TRAINING Certification Training Methods Classroom Training Prior Product Training Updated Schedules will be provided on PartnerLink Di250/350/250f/350f trained technicians Di200/251/351/200f/251f/351f Product Comparison Manual, available on PartnerLink through the Professional Development Link Minolta Analog Technicians Introduction to Digital CBT part number 9005-9005-17 Facsimile Basics (paper-based) part number 8909-4887-07 Classroom Training
No Prior Product Training
YIELD PROTECTION PROGRAM The Product and Technical Support Division is pleased to announce a yield protection program for the Imaging Unit and Fusing Unit of the Di251 Series of Digital Copiers (Di200/200f/251/251f/351/351f). Along with the many engineering and serviceability enhancements, the yield protection program will give you the ability to provide very competitive service agreements. Here are the key details of the program: The Di251 Series Yield Protection Program is in effect until March 31, 2002. This program covers Imaging Units with the manufacturing revision of H or higher. See Figure 1 to identify the Imaging Unit manufacturing revision. We will honor this program for the above listed Imaging Units when used in the Di250 Series of Digital Copiers (Di250/250f/350/350f). See the Imaging Unit Interchange Table 3. The amount of credit issued is based on the Pro-Rate Tables 1 and 2 below. The credit is based on the GMAP price of the item. To submit a claim, please follow the procedure outlined below.
Table 1: Fusing Unit Pro-Rate Table:
Model Fusing Unit Part Number Published Yield Di200/200f 4013-0321-02 300,60,000 60,001 120,000 120,001 180,000 180,001 240,000 240,001 300,000 Di251/251f 4012-0321-02 300,60,000 60,001 120,000 120,001 180,000 180,001 240,000 240,001 300,000 Di351/351f 4011-0321-02 300,60,000 60,001 120,000 120,001 180,000 180,001 240,000 240,001 300,000 Credit

Yield Pages

100% 60% 40% 20% 0%
Table 2: Imaging Unit Pro-Rate Table:
Model Imaging Unit Part Number Published Yield Di200/200f 4163-612 62,- 12,000 12,401 - 24,800 24,801 - 37,200 37,201 - 49,600 49,601 - 62,000 Di251/251f 4163-612 74,- 14,800 14,801 - 29,600 29,601 - 44,400 44,401 - 59,200 59,201 - 74,000 Di351/351f 4163-602 80,- 16,000 16,001 - 32,000 32,001 - 48,000 48,001 - 64,000 64,001 - 80,000 Credit

1DPH ,QVWDOODWLRQ 7\SH RI 'RFXPHQW 'HWHFWDEOH 'RFXPHQW 6L]HV &DSDFLW\ $OLJQPHQW 'RFXPHQW /RDGLQJ 'RFXPHQW 7UDQVSRUW 6SHHG $XWRPDWLF 'RFXPHQW )HHGHU 6FUHZHG WR WKH FRSLHU 3ODLQ SDSHU /& /& / / VKHHWV PD[ VKHHWV PD[ ZKHQ 0L[ 2ULJLQDO 0RGH a JP aOEV 5HDU 'RFXPHQW (GJH *XLGH )DFH XS VKHHWVPLQ $& RU /HWWHU & VKHHWVPLQ $& RU /HWWHU & VKHHWVPLQ $& RU /HWWHU & 0RGHV 3RZHU 6RXUFH 3RZHU &RQVXPSWLRQ 'LPHQVLRQV 6LGHG 2ULJLQDO 0L[HG 2ULJLQDO '& 9 '& 9 VXSSOLHG IURP WKH FRSLHU : :LGWK 'HSWK +HLJKW :HLJKW
7<3(6 2) 25,*,1$/6 :+,&+ 6+28/' 127 %( 86('
7\SH RI 2ULJLQDO 6KHHWV VWDSOHG RU FOLSSHG WRJHWKHU 6KHHWV JOXHG WRJHWKHU 6KHHWV IROGHG WRUQ RU ZULQNOHG 6KHHWV VHYHUHO\ FXUOHG 3RVVLEOH 7URXEOH 7DNHXS IDLOXUH GDPDJHG VKHHW GHIHFWLYH GULYH PHFKDQLVP GXH WR MDPPHG FOLSV 7DNHXS IDLOXUH GDPDJHG VKHHW 7DNHXS IDLOXUH GDPDJHG VKHHW 6KHHWV PLVIHG GXH WR EHLQJ GRJHDUHG RU IHG LQ DVNHZ
7\SH ,QVWDOODWLRQ 7\SH RI &RS\ 3DSHU 3DSHU 6L]HV 3DSHU :HLJKW 5HJLVWUDWLRQ 3RZHU 5HTXLUHPHQWV 0D[ 3RZHU &RQVXPSWLRQ 'LPHQVLRQV '& 9 6ZLWFKEDFN DQG &LUFXODWLQJ 'XSOH[ 8QLW 0RXQWHG RQ WKH ULJKW VLGH GRRU RI FRSLHU 3ODLQ SDSHU UHF\FOHG SDSHU $/& WR $/ RU / WR / / /HQJWKZLVH & &URVVZLVH WR JP RU WR OEV &HQWHU '& 9 : :LGWK 'HSWK +HLJKW :HLJKW VXSSOLHG IURP FRSLHU
1DPH 7\SH ,QVWDOODWLRQ 7\SH RI &RS\ 3DSHU 3DSHU 6L]HV 3DSHU :HLJKW 5HJLVWUDWLRQ &DSDFLW\ 3RZHU 5HTXLUHPHQWV 0D[ 3RZHU &RQVXPSWLRQ 'LPHQVLRQV :LGWK 'HSWK +HLJKW :HLJKW 8QLYHUVDO &DVVHWWH OEV )L[HG 3DSHU 6L]H &DVVHWWH OEV '& 9 3) 8QLYHUVDO &DVVHWWH 3) )L[HG 3DSHU 6L]H &DVVHWWH $GGRQ SDSHU VRXUFH XQLW 0RXQWHG EHQHDWK 8SSHU 'UDZHU RI FRSLHU 3ODLQ SDSHU UHF\FOHG SDSHU %/& WR $/ RU [ /& WR [ / / /HQJWKZLVH & &URVVZLVH WR JP RU WR OEV
&HQWHU VKHHWV '& 9 : VXSSOLHG IURP FRSLHU
7\SH 7\SH RI 3DSHU 3DSHU 6L]H 3DSHU :HLJKW 5HJLVWUDWLRQ 3DSHU &DSDFLW\ 3RZHU 5HTXLUHPHQWV 'LPHQVLRQV '& 9 )URQW /RDGLQJ 7\SH /&& 3ODLQ SDSHU UHF\FOHG SDSHU %& $& /HWWHU & / /HQJWKZLVH & &URVVZLVH WR JP RU WR OEV &HQWHU VKHHWV ; '& 9 VXSSOLHG IURP FRSLHU :LGWK LQ 'HSWK LQ +HLJKW LQ :HLJKW OEV
Mode Paper Type Paper Size Paper Weight Capacity Finishing Tray Max. No. of Sheets to be Stapled
250 sheets: A4C, 8-1/(80 g/m2, 20 lb) 150 sheets: except A4C, 8-1/(80 g/m2, 20 lb) (Height: up to 36 mm, 1-1/2)
3ODLQ SDSHU JP OE -6 -RE 7UD\ 8SSHU ([LW 7UD\ $& /HWWHU & 6KHHWV ([FHSW $& /HWWHU & VKHHWV +HLJKW XS WR /RZHU ([LW 7UD\ $& /HWWHU & VKHHWV ([FHSW $& /HWWHU & VKHHWV ([FHSW +HLJKW XS WR $& /HWWHU & VKHHWV 27 6KLIW 7UD\ ([LW 7UD\ $& /HWWHU & VKHHWV +HLJKW XS WR 7UDQVSDUHQFLHV WKLFN SDSHU SRVWFDUG - -6 RE 7UD\ /RZHU ([LW 7UD\ VKHHWV 27 6KLIW 7UD\ ([LW 7UD\ VKHHWV

WARRANTY Please refer to the Warranty and Special Programs section of the Dealer Service Support Manual item number 9005-9005-18.

ASTM DATA SHEET

MODEL: Di200 TEST SYSTEM Di200 AFR-17 PF-118 PF-119 AD-10 OT-102 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand-by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.12 Min 58.88 Min 7 Single-sided Copies Watt Hour B.T.U. 0.00 0.00 198.20 676.26 175.00 597.10 99.30 338.81 186.20 635.31 0.54 Min 110.10 375.66 23.20 79.16 11.20 38.21 10.80 36.85 0.80 2.73 0.00080 0.00273 55.10 Min/Hr 0.92 0.00 4360.40 164.60 1995.06 16344.75 0.00 14877.68 561.61 6807.14 55768.28
Duplexed Copies Watt Hour B.T.U.

188.20

642.14

13.20 0.94 0.00094

45.04 3.22 0.00322

22700.21 64460.21 17.91

77453.10 219938.22 61.09 64974.49 18.05 221692.96 61.58
MODEL: Di200f TEST SYSTEM Di200f AFR-17 PF-118 PF-119 AD-10 OT-102 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand-by Copy Process

192.10

655.45

3.70 0.13 0.00013

12.62 0.45 0.00045

24110.47 52890.47 9.44

82264.94 180462.30 32.23 52850.47 9.44 180325.82 32.20
MODEL: Di251f TEST SYSTEM Di251f AFR-17 PF-117 PF-118 PF-119 AD-10 FN-109 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 1.74 Min 58.26 Min 7 Single-sided Copies Watt Hour B.T.U. 0.00 0.00 207.70 708.67 176.00 600.51 105.50 359.97 187.90 641.11 0.24 Min 112.70 384.53 31.70 108.16 11.90 40.60 7.20 24.57 0.43 1.45 0.00043 0.00145 56.58 Min/Hr 0.94 0.00 4569.40 168.96 1239.74 17824.86 0.00 15590.79 576.48 4230.01 60818.42

191.20

652.37

15.20 0.54 0.00054

51.86 1.85 0.00185

23634.00 66334.00 11.85

80639.21 226331.61 40.42 66994.00 11.96 228583.53 40.82
MODEL: Di351 TEST SYSTEM Di351 AFR-17 PF-117 PF-118 PF-119 AD-10 FN-109 OZONE EMISSIONS: DECIBLE LEVELS: 0.01 ppm 28.9 db(A) 52.7 db(A) Stand by Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*522> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(176-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N 2.41 Min 57.59 Min 9 Single-sided Copies Watt Hour B.T.U. 0.30 1.02 205.70 701.85 179.00 610.75 126.80 432.64 191.40 653.06 0.48 Min 132.80 453.11 26.70 91.10 12.40 42.31 6.00 20.47 0.23 0.78 0.00023 0.00078 53.27 Min/Hr 0.89 156.60 4525.40 159.23 3000.99 20190.96 534.32 15440.66 543.31 10239.39 68891.54

6. ACCIDENTAL RELEASE MEASURES
Personal Precautions: None Environmental Precautions: None Methods for Cleaning Up: Wipe off with paper or cloth. DO NOT use vacuum cleaner when a large amount is released. It, like most finely divided organic powders, may create a dust explosion.
MATERIAL SAFETY DATA SHEET Page:3/6 Product Name: MT TONER 302[] MSDS No.:PPC-0723 Issue Date: 11 May 2001

7. HANDLING AND STORAGE

Handling Technical Measures/Precautions: None Safe Handling Advice: Try not to disperse the particles. Storage Technical Measures: None Storage Conditions: Keep container closed. Store in a cool and dry place. Keep out of reach of children Incompatible Products: None Packing Materials : Bottles or Cartridge designated by Minolta.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures Ventilation: None required with intended use. Control Parameters(As total dust) OSHA-PEL(USA): 15mg/m3 ACGIH-TLV(USA): 10mg/m3 DFG-MAK(GER): 6mg/m3 Worksafe-TWA(Austl.): 10mg/m3 Personal Protective Equipment None required when used as intended in Minolta equipment. For use other than normal customer-operating procedures (such as in bulk toner processing facilities), goggles and respirators may be required. Hygiene Measures: Wash hands after handling.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance Physical State: Solid Form: Powder Color: Black Odor: Faint odor Particle Size(m): 5 - 15 PH/Boiling Point(C): Not applicable Melting Point(C): No data available Softening Point(C): 110 - 125 * Flash Point(C): Not applicable Ignition Temperature(C): > 400 * Explosion Properties: No data available Vapor Pressure: Not applicable Density(g/cm): 1.2 * (bulk density: 0.41 *) Solubility in water: Negligible Oxidizing Properties: No data available Partition Coefficient, n-Octanol/Water: Not applicable
MATERIAL SAFETY DATA SHEET Page:4/6 Product Name: MT TONER 302[] MSDS No.:PPC-0723 Issue Date: 11 May 2001
10. STABILITY AND REACTIVITY
Stability: Stable [ X ] Unstable [ ] Hazardous Reactions: Dust explosion, like most finely divided organic powders. Conditions to avoid: Electric discharge, throwing into fire. Materials to Avoid: Oxidizing materials. Hazardous Decomposition Products: CO, CO2
11. TOXICOLOGICAL INFORMATION
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data Acute Toxicity: Inhalation, LC50(mg/l): >1.93 (Rats,4hour) * (This was the highest attainable concentration.) Ingestion(oral), LD50(mg/kg): >2000 (Rats) * Dermal, LD50(mg/kg): No data available Eye irritation: Slight conjunctival irritation (Rabbits) * Skin irritation: Non irritant (Rabbits) * Skin sensitizer: Non sensitizer (Guinea pig) * Mutagenicity:(AMES test) Negative * (*= Based on data for other Minolta Products with similar ingredients) Local Effects: see Chronic Toxicity or Long term Toxicity Chronic Toxicity or Long Term Toxicity: Prolonged inhalation of excessive dust may cause lung damage. It is attributed to lung overloading, a generic response to excessive amounts of any dust retained in the lungs for a prolonged interval. Use of this product, as intended, does not result in inhalation of excessive dust. In a study in rats by chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of rats in the high concentration(16mg/m) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle(4mg/m) exposure group. But no pulmonary change was reported in the lowest(1mg/m) exposure group, the most relevant level to potential human exposures. Carcinogenicity IARC Monographs/NTP(USA)/OSHA Regulated(USA): Not listed In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This evaluation is given to Carbon Black for which there is inadequate human evidence, but sufficient animal evidence. The latter is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce

MATERIAL SAFETY DATA SHEET Page:1/6 Product Name: STARTER IN IMAGING UNIT
MSDS No.:PPC-1693 Issue Date: 11 May 2001
Product Name: STARTER IN IMAGING UNIT used for: Di200, Di200f, Di250, Di250f, Di251, Di251f, Di350, Di350f, Di351, Di351f Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
2. COMPOSITION / INFORMATION ON INGREDIENTS
Hazardous Ingredients: Chemical Name: Carbon black (1- 5%) CAS No.: 1333-86-4 OSHA Z-Tables(USA): 3.5mg/m3 NTP(USA): Not listed Symbol(EC): Not listed DFG-MAK(GER): III 3B
Major Ingredients: [Generic Name] Magnetite Polyester resin Polyester resin Styrene acrylate copolymer Carbon black
[CAS No.] 1317-61-9 +++ +++ +++ 1333-86-4
[%] 60-70 10-20 10-20 1- 5 1- 5
MATERIAL SAFETY DATA SHEET Page:2/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001
Most Important Hazards and Effects of the Products For Human Health: This starter is not classified as a human carcinogen. No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: Dust explosion(like most finely divided organic powders)
MATERIAL SAFETY DATA SHEET Page:3/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001
Appearance Physical State: Solid Form: Powder Color: Black Odor: Faint odor Particle Size(m): 5 - 15(toner) about 30 (carrier) PH/Boiling Point(C): Not applicable Melting Point(C): No data available Softening Point(C): 110 - 125 * Flash Point(C): Not applicable Ignition Temperature(C): > 400 * Explosion Properties: No data available Vapor Pressure: Not applicable Density(g/cm): 4 (bulk density: about 1.3) Solubility in water: Negligible Oxidizing Properties: No data available Partition Coefficient, n-Octanol/Water: Not applicable
MATERIAL SAFETY DATA SHEET Page:4/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data Acute Toxicity: Inhalation, LC50(mg/l): No data available Ingestion(oral), LD50(mg/kg): >2000 (Rats) * Dermal, LD50(mg/kg): No data available Eye irritation: Slight conjunctival irritation (Rabbits) * Skin irritation: Non irritant (Rabbits) * Skin sensitizer: Non sensitizer (Guinea pig) * Mutagenicity:(AMES test) Negative * (*= Based on data for other Minolta Products with similar ingredients) Local Effects: see Chronic Toxicity or Long term Toxicity Chronic Toxicity or Long Term Toxicity: Prolonged inhalation of excessive dust may cause lung damage. It is attributed to lung overloading, a generic response to excessive amounts of any dust retained in the lungs for a prolonged interval. Use of this product, as intended, does not result in inhalation of excessive dust. In a study in rats by chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of rats in the high concentration(16mg/m) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle(4mg/m) exposure group. But no pulmonary change was reported in the lowest(1mg/m) exposure group, the most relevant level to potential human exposures. Carcinogenicity IARC Monographs/NTP(USA)/OSHA Regulated(USA): Not listed In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This evaluation is given to Carbon Black for which there is inadequate human evidence, but sufficient animal evidence. The latter is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung.

MATERIAL SAFETY DATA SHEET Page:5/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001 Studies performed in animal models other than rats have not demonstrated an association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.
MATERIAL SAFETY DATA SHEET Page:6/6 Product Name: STARTER IN IMAGING UNIT MSDS No.:PPC-1693 Issue Date: 11 May 2001 EU Information Information on the label (88/379/EEC and 67/548/EEC): Symbol & Indication: Not required R-Phrase: Not required S-Phrase: Not required 76/769/EEC: All chemical substances in this product comply with all applicable rules or order under 76/769/EEC.
NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 1 Flammability: 1 Reactivity: 0 HMIS Rating: The National Paint and Coating Association(USA): Health: 1 Flammability: 1 Reactivity: 0 Recommended Uses: Starter for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co.,Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist. Literature References: ANSI Z400.1-1993 ISO 11014-1 Commission Directive 91/155/EEC IARC(1996): IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65, Printing Process and Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149-261 H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-299.
MATERIAL SAFETY DATA SHEET Page:1/5 Products Name: PHOTOCONDUCTOR
MSDS No.: DPO-0243 Issue Date: 11 May 2001
Product Name: PHOTOCONDUCTOR used for: Di200, Di250, Di350, Di200f, Di250f, Di350f, Di251, Di351, Di251f, Di351f Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
2. COMPOSITION / INFORMATION

INGREDIENTS

Hazardous Ingredients: None present
Major Ingredients: [Generic Name] Substrate Aluminum drum Coating layer Binder resin Photosensitive material Pigment

[CAS No.] +++

[%] >97 < 3

+++ +++ +++

MATERIAL SAFETY DATA SHEET Page:2/5 Products Name: PHOTOCONDUCTOR
Most Important Hazards and Effects of the Products For Human Health: No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: None
Symptoms of Overexposure: No symptoms expected with intended use. Routes of Entry: None Information Inhalation: No treatment Skin Contact: No treatment Eye Contact: No treatment Ingestion: No treatment Note to Physician: None

is is is is

required. required. required. required.
Suitable Extinguishing Media: Extinguishing Media to Avoid: Special Firefighting Procedures: Fire and Explosion Hazards: explosive hazards. Protection of Firefighters:
CO2, water, foam and dry chemical None None This material has no unusual fire No special equipment is required.
Personal Precautions: Environmental Precautions: Methods for Cleaning Up:
Not applicable with intended use. Not applicable with intended use. Not applicable with intended use.
Handling Technical Measures: None Precautions: This product will be scorched in the case of fire. Safe Handling Advice: None. Storage Technical Measures: None Storage Conditions: Keep and Store in a cool and dry place. Incompatible Products: None Packing Materials: Cardboard box designated by Minolta.
MATERIAL SAFETY DATA SHEET Page:3/5 Products Name: PHOTOCONDUCTOR
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures Ventilation: None required with intended use. Control Parameters OSHA-PEL(USA): Not Applicable DFG-MAK(EC): Not Applicable ACGIH-TLV(USA): Not Applicable Worksafe-TWA(Austl): Not Applicable
Personal Protective Equipment None required when used as intended in Minolta equipment. Hygiene Measures: Wash hands after handling.
Appearance Physical State: Solid Odor: Odorless

Form: Cylinder

Color: Green
<<Results of the coated compounds on the aluminum substrate.>> Boiling Point: Not applicable Melting/Softening Point: No data available Flash Point: Not applicable pH: Not applicable Explosion Properties: Not applicable Density(g/cm): 2.7 Solubility in water: insoluble Flammability: Not applicable Oxidizing Properties: No data available Ignition Temperature(C): No data available Vapor Pressure: Not applicable Partition Coefficient, n-Octanol/Water: Not applicable *= Based on data for other Minolta Products with similar ingredients)

Stability: Stable [ X ] Unstable [ ] Hazardous Reactions: None Conditions to avoid: None Materials to Avoid: None Hazardous Decomposition Products: CO, CO2
MATERIAL SAFETY DATA SHEET Page:4/5 Products Name: PHOTOCONDUCTOR
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data <<Result of the coated compounds on the aluminum substrate.>> Acute Toxicity: Inhalation, LC50(mg/l): Not applicable Ingestion(oral), LD50(mg/kg): >2000 (Rats) Dermal, LD50(mg/kg): Not applicable Eye irritation: Very slight irritation (Rabbits) Skin irritation: Non irritant (Rabbits) Skin sensitizer: No data available Mutagenicity: Negative (AMES test) (*= Based on data for other Minolta Products with similar ingredients) Local Effects: No data available Chronic Toxicity or Long Term Toxicity: None Carcinogenicity IARC Monographs: Not listed NTP(USA): Not listed OSHA Regulated(USA): Not listed
Appropriate Methods of Disposal Waste may be disposed or incinerated under conditions which meet all federal, state and local environmental regulations.
MATERIAL SAFETY DATA SHEET Page:5/5 Products Name: PHOTOCONDUCTOR
US Information Information on the label: Not required SARA(Superfund Amendments and Reauthorization Act) Title III 302 Extreme Hazardous Substance: None 311/312 Hazard Categories: None 313 Reportable Ingredients: None California Proposition 65: This product contains no chemical substances subject to California Proposition 65. EU Information Information on the label(88/379/EEC and 67/548/EEC): Symbol & Indication: Not required R-Phrase: Not required S-Phrase: Not required
NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 0 Flammability: 1 Reactivity: 0 HMIS RATING: The National Paint and Coating Association(USA): Health: 0 Flammability: 1 Reactivity: 0 Recommended Uses: Photoconductor for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co., Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist. Literature References: ANSI Z400.1-1993 ISO 11014-1 Commission Directive 91/155/EEC