7664-4002-02

Di450/Di550
As an ENERGY STAR Partner, we have determined that this machine meets the ENERGY STAR Guidelines for energy efficiency.
What is an ENERGY STAR Products?
An ENERGY STAR product has a special feature that allows it to automatically switch to a low-power mode after a period of inactivity. An ENERGY STAR product uses energy more efficienty, saves you money on utility bills and helps protect the environment.
Recycled Paper (USA market only)
Your Minolta machine has been designed to use the following Recycled Paper Minolta Recycled Bond 20% Post Consumer Waste Item No. 8925 701

SAFETY INFORMATION

This section contains detailed instructions on the operation and maintenance of this machine. To achieve optimum utility of this device, all operators should carefully read and follow the instructions in this manual. Please keep this manual in a handy place near the machine.
Please read the next section before using this device. It contains important information related to user safety and preventing equipment problems. Make sure you observe all of the precautions listed in this manual.
*Please note that some parts of the contents of this section may not correspond with the purchased product.
s Warning and Precaution Symbols
Ignoring this warning could cause serious injury or even death.

WARNING:

Ignoring this caution could cause injury or damage to property.

CAUTION:

s Meaning of Symbols
A triangle indicates a danger against which you should take precaution.
This symbol warns against possible electrical shock.
A diagonal line indicates a prohibited course of action.
This symbol warns against dismantling the device.
A black circle indicates an imperative course of action.
This symbol indicates you must unplug the device.

WARNING

Do not modify this product, as a fire, electrical shock, or breakdown could result. If the product employs a laser, the laser beam source could cause blindness. Do not attempt to remove the covers and panels which have been fixed to the product. Some products have a high-voltage part or a laser beam source inside that could cause an electrical shock or blindness. Only use the power cord supplied in the package. Failure to use this cord could result in a fire or electrical shock. Use only the specified power source voltage. Failure to do that could result in a fire or electrical shock. Do not use a multiple outlet adapter to connect any other appliances or machines. Use of a power outlet for more than the marked current value could result in a fire or electrical shock. Do not unplug and plug in the power cord with a wet hand, as an electrical shock could result.
Plug the power cord all the way into the power outlet. Failure to do this could result in a fire or electrical shock.
Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) could result in a fire or breakdown. Should any of these conditions be found, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. In principle, do not use an extension cord. Use of an extension cord could cause a fire or electrical shock. Contact your authorized service representative if an extension cord is required.
Do not place a flower vase or other container that contains water, or metal clips or other small metallic objects on this product. Spilled water or metallic objects dropped inside the product could result in a fire, electrical shock, or breakdown. Should a piece of metal, water, or any other similar foreign matter get inside the product, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If this product becomes inordinately hot or emits smoke, or unusual odor or noise, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result. If this product has been dropped or its cover damaged, immediately turn OFF the power switch, unplug the power cord from the power outlet, and then call your authorized service representative. If you keep on using it as is, a fire or electrical shock could result. Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter and cause burns or other damage.

Connect the power cord to an electrical outlet that is equipped with a grounding terminal.

CAUTION

Do not use flammable sprays, liquids, or gases near this product, as a fire could result. Do not leave a toner unit or drum unit in a place within easy reach of children. Licking or ingesting any of these things could injure your health. Do not let any object plug the ventilation holes of this product. Heat could accumulate inside the product, resulting in a fire or malfunction. Do not install this product at a site that is exposed to direct sunlight, or near an air conditioner or heating apparatus. The resultant temperature changes inside the product could cause a malfunction, fire, or electrical shock. Do not place the product in a dusty place, or a site exposed to soot or steam, near a kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could result. Do not place this product on an unstable or tilted bench, or in a location subject to a lot of vibration and shock. It could drop or fall, causing personal injury or mechanical breakdown. After installing this product, mount it on a secure base. If the unit moves or falls, it may cause personal injury. Do not store toner units and PC drum units near a floppy disk or watch that are susceptible to magnetism. They could cause these products to malfunction. The inside of this product has areas subject to high temperature, which may cause burns. When checking the inside of the unit for malfunctions such as a paper misfeed, do not touch the locations (around the fusing unit, etc.) which are indicated by a Caution ! High Temperature ! warning label. Do not place any objects around the power plug as the power plug may be difficult to pull out when an emergency occurs.
Always use this product in a well ventilated location. Operating the product in a poorly ventilated room for an extended period of time could injure your health. Ventilate the room at regular intervals. Whenever moving this product, be sure to disconnect the power cord and other cables. Failure to do this could damage the cord or cable, resulting in a fire, electrical shock, or breakdown. When moving this product, always hold it by the locations specified in the operators manual or other documents. If the unit falls it may cause severe personal injury. The product may also be damaged or malfunction. Remove the power plug from the outlet more than one time a year and clean the area between the plug terminals. Dust that accumulates between the plug terminals may cause a fire. When unplugging the power cord, be sure to hold onto the plug. Pulling on the power cord could damage the cord, resulting in a fire or electrical shock.

NOTE = Locate the Machine in a Well Ventilated Room = A negligible amount of ozone is generated during normal operation of this machine. An unpleasant odor may, however, be created in poorly ventilated rooms during extensive machine operations. For a comfortable, healthy, and safe operating environment, it is recommended that the room be well ventilated.
REMARQUE = Placer lappareil dans une pice largement ventile = Une quantit d'ozone ngligable est dgage pendant le fonctionnement de lappareil quand celui-ci est utilis normalement. Cependant, une odeur dsagrable peut tre ressentie dans les pices dont l'aration est insuffisante et lorsque une utilisation prolonge de lappareil est effectue. Pour avoir la certitude de travailler dans un environnement runissant des conditions de confort, sant et de scurit, il est prfrable de bien arer la pice ou se trouve lappareil.

Moving the Machine

If you need to transport the machine over a long distance, consult your Technical Representative.

Care of Machine Supplies

Use the following precautions when handling the machine supplies (toner, paper, etc.).
x Store the paper, toner, and other supplies in a place free from direct sunlight and away from any heating
apparatus. Keep them in a dry, cool, clean environment.
x Store paper, which has been removed from its wrapper but not loaded into the drawer, in a sealed
plastic bag in a cool, dark place.
x Keep supplies out of the reach of children. x If your hands become soiled with toner, wash them with soap and water immediately.
Note on making multiple copies
If the fusing temperature drops excessively during a multi-copy cycle, there is a possibility that the copying speed will be reduced. The copying speed will automatically return to normal when the fusing temperature rises enough to ensure good fusing performance.
Legal Restrictions on Copying
Certain types of documents must never be copied by the machine for the purpose or with the intent to pass copies of such documents off as the original. The following is not a complete list but is meant to be used as a guide to responsible copying. Financial Instruments Personal Checks Travelers Checks Money Orders Certificates of Deposit Bonds or other Certificates of Indebtedness Stock Certificates Legal Documents Food Stamps Postage Stamps (canceled or uncanceled) Checks or Drafts drawn by Government Agencies Internal Revenue Stamps (canceled or uncanceled) Passports Immigration Papers Motor Vehicle Licenses and Titles House and Property Titles and Deeds General Identification Cards, Badges, or Insignias Copyrighted Works without permission of the copyright owner In addition, it is prohibited under any circumstances to copy domestic or foreign currencies or Works of Art without permission of the copyright owner. When in doubt about the nature of a document, consult with legal counsel.

Useful Tips Example: 1.300 Press 1, 3, 0, and 0, in that order, from the 10Key Pad.

4003P321EA

Touch [X] or [Y] to enter the desired zoom ratio from the 10-Key Pad.

1149O160BA

To correct a ratio, press the Clear key and then enter the correct one again. The zoom ratio can be set in the range 0.250 to 4.000 when the copy is made through the Original Glass and 0.250 to 2.000 when the Electronic Document Handler is used.

4003P322EA

Useful Tips To correct a ratio, press the Clear key and then enter the correct one again. The zoom ratio can be set in the range 0.250 to 4.000 when the copy is made through the Original Glass and 0.250 to 2.000 when the Electronic Document Handler is used.
Calling up a Ratio from Memory
You can store some of the most frequently used zoom ratios in memory and recall them later as necessary. <Same ratio for X and Y> <Using the X / Y Zoom>

Touch [Custom Zoom].

From among the two ratios previously stored in memory and [Minimal], select the desired one.

4003P323EA

From among the three ratios previously stored in memory, select the desired one.
Useful Tip It's a good idea for you to store frequently used zoom ratios in memory. p.3-18

4003P324EA

Storing a Ratio in Memory
<Same ratio for X and Y>

Touch [Input].

Touch memory location key [1] or [2], or [Minimal], whichever is desired.

4003P025CA

4003P026CA
* When the key is touched, the ratio is shown on the key, indicating that it has been stored in memory, except for [Minimal]. NOTES When a new ratio is stored, the old one is erased. The [Minimal] ratio can range between 0.900 and 0.999. When the Hard Disk Drive Kit is mounted and 100 Accounts is selected for Copy Track of Administrator Mode available from Utility Mode, zoom ratios can be stored in memory for each account.
<Using the X / Y Zoom>

4003P320EA 4003P328EA

4003P329EA
* When the key is touched, the ratio is shown on the key, indicating that it has been stored in memory. NOTES When a new ratio is stored, the old one is erased. When the Hard Disk Drive Kit is mounted and 100 Accounts is selected for Copy Track of Administrator Mode available from Utility Mode, zoom ratios can be stored in memory for each account.

4003P327EA

Touch memory location key [1], [2] or [3] in which to store the set zoom ratio.
5. Selecting the Finishing
When you touch [Finishing] after touching [Basics] on the Touch Panel, a screen appears that allows you to set a particular finishing function.

4003P541EA

Finishing Functions

Non-Sort

All copies are fed out without being sorted, grouped, stapled or punched. Touch [Non-Sort]. NOTE Thick paper and OHP transparencies cannot be used for making copies in Staple, Punch and/or Folding.

Z-Folded + Unfolded*

Paper Size LetterC LetterL 1117L, LegalL 5-1/28-1/2 Crisscross Sort Letter Corner 1117L to Letter LetterC Sort Side 1117L, LegalL, Group LetterL Center 1117L to LetterL Crease Staple 1117L to LetterL Half- Non-Sort, Sort, Group 1117L to LegalL Fold Staple 1117L to LegalL Non-Sort, Sort, Group 1117L ZFold Staple 1117L Non-Sort Sort Group 1117L (Z-Folded) + LetterC
Bottom Offset Tray Top Offset Tray Corner Staple 2-Point Staple 100 sheets 2500 sheets (no staple) 100 sheets 2000 sheets (no staple) 100 sheets 1500 sheets (no staple) 100 sheets 100 sheets 1000 sheets (no staple) 100 sets or 1000 sheets 200 sets or 2000 Sheets

30 sheets

Z-Folded: 100 sheets Z-Folded 100 sheets Z-Folded + Unfolded*: Z-Folded +Unfolded*: 1000 sheets 2000 sheets
* Only 1117L size paper can be Z-folded. Therefore, if a stack of mixed-size originals (1117L and other sizes) is copied in Mixed Original Detection mode, the copy set will contain a mix of Z-folded and unfolded copies. NOTE When a Finisher FN-105, Finisher FN-106, or Mailbin Finisher is mounted, the Auto Dual function will not function.

Note on Stapling

When copies are made using the stapling function, the stapled copy sets may not be neatly stacked on the tray or may even fall off the tray unless certain conditions are met regarding the number of copies to be stapled and the number of copy sets to be made. Use the following table as guidelines when making copies.
Copy Set Capacity No. of Copies Stapled When Finisher FN-105 is Mounted 1117 L to Letter 2 copies 3 to 5 copies 6 to 10 copies 11 to 20 copies 21 to 30 copies 31 to 40 copies 41 to 50 copies 100 sets 80 sets 60 sets 40 sets 60 sets 60 sets 60 sets When Finisher FN-106 is Mounted 1117 L to Letter 100 sets 80 sets 60 sets 40 sets 33 sets When Mailbin Finisher is Mounted 1117 L to Letter 200 sets 150 sets 100 sets 50 sets 33 sets 25 sets 20 sets

10 sheets 10 sheets -

100 sets or 1000 sheets 100 sets or 1000 sheets 50 sheets (no staple) 100 sheets 50 sheets (no staple) 100 sheets 100 sheets Z-Folded: 100 sheets Z-Folded + Unfolded*: 1000 sheets (no staple)

200 sets or 1000 Sheets

6. Selecting the Original
When you touch [Orig. copy type.
Copy] on the Touch Panel, a screen appears that allows you to set the orig.

Copy Types

Double-Sided Single-Sided <Only when the Electronic Document Handler is mounted> This setting allows you to make 1-sided copies from originals. Orig. Copy
Single-Sided Single-Sided This setting allows you to make 1-sided copies from originals.

Handy Feature Available from Initial Mode Setting
The initial setting for the original copy type is 1-Sided 1-Sided. If this setting is changed to 1Sided 2-Sided or 2-Sided 2-Sided, the Basic screen shows a [1-Sided 1-Sided] key.
Touch this key to simply set the 1-Sided Sided mode.

4003P067CA

7. Selecting the Density

Image Density

When you touch [Density] on the Touch Panel, a screen appears that allows you to set the exposure level for the image density. Density offers a choice of [Text], [Text/Photo], or [Photo]. Select one according to your needs.
Useful Tips Touching [Auto] automatically selects [Text]. The machine has been factory-set to automatically select the Auto Exposure mode. Users Choice can be used to change this default setting to the Manual Exposure mode. p.5-14
Text emphasizes outlines to produce clear-cut text as it appears on the copy. <Auto Exposure> When in the Auto Exposure mode, the machine automatically adjusts the exposure level for the optimum copy image density. <Manual Exposure> In the Manual Exposure mode, you can vary the exposure level in nine steps.
Touch [Text]. Touch [Auto]. [Auto] is highlighted, indicating that the machine is set into the Auto Exposure mode.
Touch [Text]. Touch [Lighter] or [Darker] as necessary.

4003P068CA

Useful Tips To make the image darker, touch [Darker]. To make the image lighter, touch [Lighter].
Useful Tip The exposure level in the Auto Exposure mode can be made either Darker or Lighter by using Users Choice. p.5-14

Text/Photo

Select Text/Photo when you make copies from an original that contains both text and photos.
The machine can make a faithful reproduction of an original having a halftone image such as photos.
Touch [Text/Photo]. [Text/Photo] is highlighted, indicating that the machine is set into the Text/Photo mode.
Touch [Photo]. [Photo] is highlighted, indicating that the machine is set into the Photo mode.

4003P069CA 4003P071CA

Touch [Lighter] or [Darker] as necessary.

4. Users Choice

The machine has been set so that the most frequently used settings are automatically selected in the initial mode. Users Choice allows you to select the default settings which are automatically selected in the initial mode according to your own needs. This saves time and effort to make extra settings when the machine is turned ON or Auto Panel Reset is activated. For more details, consult your Technical Representative.

Users Choice Functions

A listing of Users Choice functions is given in six pages of menu, from[1/6] to [6/6]. To show the listing of each page, touch the desired page number key at the bottom of the Touch Panel.

4003P466EA

[1/6] p.5-13 Original Chapter 5
[4/6] p.5-15 Confirmation Beep [5/6] p.5-16 Universal Tray Special Paper Auto Panel Reset Energy Save Mode

Copy Default

Language Selected Mixed Original Detect Memory Recall Auto Paper/Auto Size
Tray Priority [2/6] p.5-14 2in1, 4in1, Booklet Copy Zoom Density Priority Default Level Output Priority Intelligent Sorting Criss Cross Mode [3/6] p.5-15 Small Originals 4in1 Copy Order Date Printing Format Date Printing Position Page Number Position
Plug-in Counter Reset Auto Shut OFF *1 *1: Sleep is shown when the Printer Controller is mounted.
[6/6] p.5-16 Date/Time Set Print Exposure Priority Device Density (ADF) Priority Offset Tray
Useful Tip When 100 Accounts is selected, the Users Choice functions of [1/6] to [4/6] can be set for each account after the corresponding access code has been entered. (In this case, the listing of Users Choice displayed on the Touch Panel is from [1/4] to [4/4].) The administrator can make the Users Choice settings in common with all 100 accounts after 100 Accounts has been selected. With the Touch Panel prompting you to enter the access code, press the Utility key. Touch [Users Choice]. Enter the administrator number from the 10Key Pad. * This allows the administrator to make the settings for [1/6] to [6/6]. NOTE The Users Choice settings in common with 100 accounts for [1/6] to [4/6] are not valid for the accounts for which the individual Users Choice settings have been made after 100 Accounts was selected.
Specify the original copy type automatically selected when power is turned ON or panel reset. The initial setting is 1-Sided 1-Sided.

4002O362AA

<Finisher FN-106> Remove the empty staple clip from the Staple Cartridge

4002O177AB

Pull the Staple Cartridge out to the front. <Finisher FN-105>

4002O180AB

Stapler #2

4002O178AA

<Finisher FN-105> Load a new staple clip in the Staple Cartridge and return the upper part of the cartridge back again. Gently peel off the stopper seal.
<Only when the Finisher FN-105 is mounted> Close Right Door [FN7].

4002O184AB 4002O363AA

<Finisher FN-106> Load a new staple clip into the Staple Cartridge and carefully peel off the Seal.
Slide the Finisher back against the machine. Touch [Staple] shown on the Touch Panel and the machine automatically feeds a sheet of paper to test the stapling.

4002O181AC

Insert the new Staple Cartridge until a click is heard. <Finisher FN-105>

4003P188CA

Remove the sheet of paper to check that it has been properly stapled. Chapter 6

4002O182AA

<Finisher FN-106>

4002O186AC

* If no staples are evident, clear the staple misfed. Clearing the Staple Misfeed. p. 6-40 NOTES Reload the Staple Cartridge only after you are prompted to do so by the message. Removing the Staple Cartridge before then will result in stapling trouble. After a new Staple Cartridge has been installed, be sure to run a test-stapling sequence to ensure that staples are properly driven into the paper.

4002O183AD

Mailbin Finisher
Press and turn the knob and open the cover at the rear of the Finisher.
Load a new staple clip into the Staple Cartridge and carefully peel off the Seal.

4002O341AA 1155O766AA

Insert the Staple Cartridge into the Staple Unit until it clicks into place.

1166O127AA 1166O130AB

While pressing down the green lever, pull out the Staple Cartridge.
Align the arrows and firmly push the Staple Unit down into the well.

1166O128AA 1166O131AB

Remove the empty staple clip from the Staple Cartridge.
Press and turn the knob to lock the cover.

4003P201CA

7. What Does Each Message Mean?
What does each message mean?
Message Malfunction detected. Call your Technical Rep. and provide code: Please add toner. Follow the instructions on label inside of Front Door. Please add toner. Cause The machine malfunctioned and is unable to make copies. Action Call and inform your Technical Representative of the code being shown on the Touch Panel. Replace the Toner Bottle with a new one. (When the Message Please add Toner. Appears p. 6-6) Replace the Toner Bottle with a new one. (When the Message Please add Toner. Appears p. 6-6) Replace the Staple Cartridge with a new one. (When the Message Stapler is empty. Appears p. 6-8) Call your Technical Representative. Contact the administrator of your machine. (Administrator Mode of Utility Mode p. 5-19) Add the number of originals indicated to the bottom of the remaining stack and reload.
Toner has run out and the machine is unable to make copies. Toner is soon running out.
Stapler empty. Replace Staple Cartridge or cancel Staple mode. Preventative maintenance time. Your account has reached its maximum copy allowance. Please call your administrator. Return the following # of originals to Document Feeder: # Sheet(s)
The staples have run out.
The time has come when the machine needs service. The max. number of copies that can be made for your account is determined in the Administrator Mode. After a misfed sheet of paper has been cleared, you need to reload the originals fed out onto the Document Exit Tray onto the Document Handling Tray. The machine is unable to scan the data for lack of memory. You have left an original on the Original Glass. You have set two functions that conflict with each other.
Image data has caused memory overflow. Your copy job has been canceled. Original left on the Glass. This mode cannot be selected with the.
Wait until a print cycle is run or erase a reserved job to make room for new data. Remove the original from the glass. Cancel either one of the two functions.
8. When This Type of Copy is Produced
When this type of copy is produced
Symptom The image is too light. Possible Cause The exposure level for the Auto Exposure mode is set at Lighter. Action Change the setting of Auto Default Level of Users Choice. p. 5-14 Or, cancel the Auto Exposure mode and select Manual Exposure to adjust the exposure level to obtain a darker image. p. 3-44 Touch [Darker] as necessary to obtain a darker image. p. 3-44 The machine needs more toner. Replenish toner by using Toner Replenisher of Utility Mode. p. 5-11 The machine needs more toner. Replenish toner by using Toner Replenisher of Utility Mode. p. 5-11 Replace the Toner Bottle. p. 6-6 Change the paper. p. 6-2 Change the setting of Auto Default Level of Users Choice. p. 5-14 Or, cancel the Auto Exposure mode and select Manual Exposure to adjust the exposure level to obtain a lighter image. p. 3-44 Touch [Lighter] as necessary to obtain a lighter image. p. 3-44 Wipe the Original Glass clean with a soft dry cloth. p. 7-10 Place the original in position so that it is held tightly against the Original Glass. p. 3-6 Change the paper. p. 6-2

Kinds of Paper

Copy Paper Size

Paper Feeding System

Warm-up Time First Copy Copy Speed (Approx. copies/min)

Zoom Ratios

Multiple Copies Exposure Control Lost Image
Power Requirements Power Consumption Dimensions Weight
2 Way Paper Feed Cabinet PF-208
Kinds of Paper Paper Size Plain paper (16 lb to 24 lb), recycled paper Duplex Unit : 1117L to 5-1/28-1/2L 3rd Drawer : 1117L to 5-1/28-1/2L 4th Drawer : 1117L to LetterL 3rd Drawer : 550 sheets (20 lb) 4th Drawer : 550 sheets (20 lb) Supplied from copier Width : 26-1/4 Depth : 28-3/4 Height : 15-1/4 100-1/4 lb
Capacity Power Source Dimensions Weight
Kinds of Paper Paper Size Capacity Power Source Dimensions Weight Plain paper (16 lb to 24 lb), recycled paper Duplex Unit : 1117L to 5-1/28-1/2L 3rd Drawer : LetterC 3rd Drawer : 2,600 sheets (20 lb) Supplied from copier Width : 26-1/4 Depth : 28-3/4 Height : 15-1/lb
Kinds of Paper Paper Size Power Source Dimensions Weight Plain paper (16 lb to 24 lb), recycled paper Duplex Unit : 1117L to 5-1/28-1/2L Supplied from copier Width : 26-1/4 Depth : 28-3/4 Height : 15-1/4 82-3/4 lb
Document Feeding System Standard Mode : 1-sided original, 2-sided original Mixed Original Detection Mode : 1-sided Mixed Original Detection 2-sided Mixed Original Detection Single Feeding Mode : 1-sided original Plain paper 1-sided original : 13-1/4 lb to 29-1/4 lb 2-sided original, Mixed Original Detection : 16 lb to 24 lb Single Feeding : 9-1/4 lb to 41-3/4 lb 1-sided, 2-sided original, Single Feeding : 1117L to 5-1/28-1/2L Mixed Original Detection : 1117L to Letter Up to 100 sheets (20 lb) Supplied from copier 72W or less Width : 26 Depth : 22-3/4 28-3/4 lb

Kinds of Original

Original Size Capacity of Document Handling Tray Power Source Power Consumption Dimensions Weight

Height : 5-1/2

Finisher FN-105
Types of Trays Modes Kinds of Paper Top Offset Tray, Bottom Offset Tray Non-Sort Mode, Sort Mode, Group Mode, Staple Mode, Hole Punch Mode Top Offset Tray Non-Sort Mode Plain paper (16 lb to 24 lb), recycled paper Exclusive paper Thick paper (24-1/4 lb to 41-3/4 lb), translucent paper, OHP transparencies Hole Punch Mode Plain paper (16 lb to 24 lb), recycled paper Bottom Offset Tray Sort Mode, Group Mode Plain paper (16 lb to 41-3/4 lb), recycled paper Staple Mode, Punch Mode Plain paper (16 lb to 24 lb), recycled paper Top Offset Tray : 1117L to 5-1/28-1/2 Bottom Offset Tray : 1117L to Letter Top Offset Tray Plain paper (20 lb), recycled paper : Max. paper size 1117L to 5-1/28-1/2, 250 sheets Exclusive paper : Thick paper, translucent paper, OHP transparencies = 20 sheets each Bottom Offset Tray Plain paper (20 lb), recycled paper : LetterL or smaller, 3,000 sheets : Larger than LegalL, 1,500 sheets Acceptable paper size : 1117L to Letter Acceptable number of copies : 2 to 50 sheets Acceptable paper size : 1117L to Letter <For United States and Canada Users> Punch Hole : 2-Hole or 3-Hole <Except United States and Canada Users> Punch Hole : 2-Hole Supplied from copier 63W or less Width : 21-1/4 Depth : 24-3/4 Height : 38-1/2 Finisher : 86-1/2 lb Staple Cartridge, 5,000 staples/cartridge 2 pieces

Capacity

Kinds of Paper Paper Size Capacity Power Source Power Consumption Dimensions Weight Plain paper (16 lb to 24 lb), recycled paper Letter C, A4C 3,400 sheets (20 lb) Supplied from copier 30W or less Width : 11-1/4 Depth : 17-1/2 Height : 19-1/4 31-1/4 lb
Kinds of Paper Paper Size Capacity Power Source Power Consumption Dimensions Weight Plain paper (16 lb to 24 lb), recycled paper LegalL, LetterL, Letter C, A4L, A4C 3,400 sheets (20 lb) Supplied from copier 40W or less Width : 17-1/4 Depth : 17-1/2 Height : 19-1/4 36-1/4 lb

2. Care of the Machine

Cleaning
Turn OFF the Power Switch of the machine when cleaning.

Housing

Original Glass
Wipe the surface of the housing clean with a soft cloth dampened with alcohol.
Raise the Original Cover. Wipe the surface of the Original Glass clean with a soft, dry cloth.

4002O260AB 4002O262AB

Control Panel

Original Pad

Turn the Power Switch OFF. Wipe the surface of the Control Panel clean with a soft, dry cloth.
Raise the Original Cover. Wipe the surface of the Original Pad clean with a soft cloth dampened with alcohol.

4002O263AC

4002O261AB
NOTE NEVER use a glass cleaner or any detergent to avoid damage to the control panel keys and Touch Panel.
<Only when the Electronic Document Handler is mounted>

Corona Units

Gently slide out the Upper Corona Unit Cleaning Lever as far as it goes.
Raise the Electronic Document Handler. Wipe the surface of the Original Pad clean with a soft cloth dampened with alcohol.

4002O192AB

4002O266AC
Gently slide the Cleaning Lever back into the original position.
Wipe the surface of the guide plate and polyester film (shown below) of the Document Handler clean with a soft, dry cloth.

Guide Plate

Polyester film

4002O193AB

4002O267AB
Gently slide out the Lower Corona Unit Cleaning Lever as far as it goes.
NOTE Wipe the film gently as it is fragile.

4002O194AB

Front Door

4002O195AB 4002O268AC

Swing down the Front Door. Wipe the surface of the Front Door clean with a soft, dry cloth.
Gently slide the Cleaning Lever back into the original position. Repeat steps 1 to 4 two to three times.
3. Function Combination Matrix
Function Combination Matrix

Function Set Last Paper Bypass Zoom Basic Finishing Orig. Orig. w Copy Copy
Single-[2in1]/Single-[4in1]
Function Set First Auto Paper Manual Paper Normal OHP Card/Vellum Small Size Auto Size Full Size Change Fixed Zoom Zoom Ratio in Memory 10-Key Input X/Y Zoom Non-Sort Sort Group Corner Staple Side Staple Center Staple Hole Punch Crease Half-Fold Z-Fold Single-Sided Double-Sided Book Single-Sided Double-Sided
Auto Paper Manual Paper Normal OHP Card/Vellum Small Size Auto Size Full Size Change Fixed Zoom Zoom Ratio in Memory 10-Key Input X/Y Zoom Non-Sort Sort Group Corner Staple Side Staple Center Staple Hole Punch Crease Half-Fold Z-Fold Single-Sided Double-Sided Book Single-Sided Double-Sided A A q q q q - A A A A A A A q q q R q q q q q q q q q q q q q q q q q q q q q q q q q - - - G G q q q q G q q q q q q q q q J q q q q q N q q q q q J q q q q M q q q q q J q q q q q M q q q R q q q q q q q q q q S S q q q q q B q q q B B B B B T T L q q q L q q q q q q q q q H H H H H H T q q q q q q Q Q q q C q q v q L q q q q q q q q q q q v -
q Single-[2in1]/Single-[4in1] v Double-[2in1]/Double-[4in1] Booklet Creation Original Direction Margin Book Erase q Page Arrange q Cover Page Insertion OHP Interleaving File Margin Edge/Frame Erase Image Repeat q Date Stamping Page Numbering Distribution Numbering Image Stamping Mixed Orig. Detection Separate Scan ADF/SADF Mode q Interrupt Reserve Orig. on the Glass Image Memory Input Orig. Finishing Zoom Paper Bypass
B q q q q -

Others

Auxiliary

Function Set Last

Double-[2in1]/Double-[4in1]
Single-[2in1]/Single-[4in1] Double-[2in1]/Double-[4in1]
q q q B q q q q q q -

Finishing

Paper Bypass
Booklet Creation Original Direction Margin Book Erase Page Arrange Cover Page Insertion OHP Interleaving File Margin Edge/Frame Erase Image Repeat Date Stamping Page Numbering Distribution Numbering Image Stamping Mixed Orig. Detection Separate Scan ADF/SADF Mode Interrupt Reserve Orig. on the Glass Image Memory Input

Access Key.. 2-14 Access Number... 2-20 Adding paper.. 6-2 Administrator Mode Functions.. 5-19 Auto Copy Start.. 2-19 Auto Drawer Switching.. 3-10 Auto Dual Function.. 3-34 Auto Exposure.. 3-44 Auto Panel Reset.. 2-19 Auto Paper.. 3-9 Auto Paper/Auto Size. 5-13 Auto Shut Off.. 2-19 Auto Size... 3-14
Edge/Frame Erase.. 3-56 Energy Saver.. 2-19 Energy Saver Key.. 2-14 Exclusive paper... 3-11
File Margin... 3-54 Folding... 3-21 Function Combination Matrix. 7-12
Basic Copying Procedures. 3-2 Book Double-Sided. 3-37 Book Single-Sided.. 3-37

Group... 3-20

Calling up a Job.. 5-5 Calling up a Ratio from Memory. 3-17 Cleaning.. 7-10 Clear Key.. 2-14 Clearing Counters for Each Account. 5-24 Clearing the Staple Misfeed.. 6-38 Conditions for Combined Functions. 7-14 Confirmation Beep... 5-15 Control Panel... 2-8 Copy Key.. 2-14 Copy Track.. 5-19 Copy Track Data.. 5-19 Cover.. 3-46 Crease... 3-28 Criss Cross Mode.. 5-14 Crisscross Grouping.. 3-22 Crisscross Sorting.. 3-22
Half-Fold... 3-29 Hole Punch... 3-21
Image Density.. 3-44 Image Memory Input.. 5-6 Image Repeat.. 3-58 Image Stamping.. 3-64 Initial Mode.. 2-18 Intelligent Sorting.. 5-14 Interrupt... 2-20 Interrupt Key.. 2-14
Job List... 3-70 Job List Key... 2-15 Job Memory Input.. 5-2 Job Recall Key.. 2-15

w w ww w w w

Language Selected..5-13 Large Capacity Cassette..6-5 List of Paper Sizes and Zoom Ratios.7-15 Loading the Originals..3-5
Replacing the Staple Cartridge..6-8 Replacing the Toner Bottle.6-6 Reserve...3-69
SADF Mode..3-8 Scan Key..2-14 Selecting Separate Scan..3-67 Selecting the Administrator Mode.5-18 Selecting the Finishing Function..3-22 Selecting the Fixed Zoom.3-14 Selecting the Original Copy Type.3-38 Setting a Copy Limit for Each Account.5-23 Setting Administrator Mode..5-20 Setting Copy Track...5-20 Shift Grouping..3-22 Shift Sorting..3-22 Single-Sided Booklet Creation.3-37 Single-Sided Double-[4in1].3-37 Single-Sided Double-Sided.3-36 Single-Sided Double-[2in1].3-36 Single-Sided Single-[4in1]..3-37 Single-Sided Single-Sided.3-36 Single-Sided Single-[2in1]..3-36 Size Counter...5-11 Sleep...2-19 Small Originals..5-15 Sort...3-20 Special Paper Setting..3-10 Specifications...7-2 Staple..3-21 Start Key..2-14 Stop Key..2-14 Storing a Ratio in Memory..3-18

w w w w w w w w

Making Different Types of Copy.4-2 Making the Users Choice Settings.5-17 Malfunction Resetting Procedure.6-44 Manual Bypass Copying..3-11 Manual Exposure..3-44 Manual Selection...3-9 Manual Staple..3-26 Margin..3-39 Max. Copy Set..5-19 Memory Recall..3-68 Meter Count..5-11 Minimal Image..3-15 Misfeed Clearing Procedures..6-16 Misfeed Location Displays..6-14 Mixed Orig. Detection.3-66 Mixed Original Detect.5-13 Mode Check...2-20 Mode Check Key..2-15
Non-Sort..3-20 Number Stamping..3-60
OHP Interleaving..3-52 On Line Key...2-15 Original Direction..3-38 Original Key...2-15 Original Copy Default..5-13 Output Priority..5-14

P R O D U C T

T E C H N I C A L

S U P P O R T

D I V I S I O N
Product Information Guide Di450/Di550
Information contained in any literature published by Minolta Corporation concerning the expected life or yields of parts, supplies or other products mean time between failures or any other service costs are and shall be deemed to be estimates only. Results in actual field experience may vary substantially from such estimates. In no event shall such estimates be deemed or represented to be in any way a representation or warranty of Minolta Corporation.

7668-4002-25

Copier Specifications

Di450/Di550

Di450 Di550
Platen Type Photoconductor Copying System Developing System Fusing System Resolution Types of Original
Console Copier/Printer Stationary OPC Electrostatic Dry Powdered Image Transfer to Plain Paper Micro-Toning System Lamp-Heated Roller 600 dpi Sheets, books and other three-dimensional objects Maximum original size: 11 X 17 Lengthwise Maximum original weight: 6-1/2 lb Plain paper (16 lb to 24 lb), recycled paper Exclusive paper : Thick paper (24-1/4 lb to 41-3/4 lb), translucent paper, OHP transparencies *Exclusive paper can only be used for the Multi Bypass Tray. 1st Drawer/2nd Drawer: 11 X 17L to 5-1/2 X 8-1/2L Intelligent Multi Bypass Tray: Crosswise: 4 to 11-3/4 Lengthwise: 5-3/4 to 17 1st Drawer/2nd Drawer: 550 sheets (20 lb) Intelligent Multi Bypass Tray : 50 sheets (20 lb), 20 sheets (recycled paper or exclusive paper) 240 seconds or less LetterC = 4 seconds or less (in full size mode using 1st Drawer) Full size (x1.000) Full size (x1.000) 11 X 17L: X 17L: 31 Legal L: 32 Legal L: 37 Letter L: 38 Letter L: 45 Letter C: 45 Letter C: 55 Fixed ratios, Full size: 1:10.005 Reduction ratios: 0.500, 0.647, 0.733, 0.785, 0.930 Enlargement ratios: 1.214, 1.294, 1.545, 2.000 Variable ratios: From 0.250 to 4.000 in 0.001 increments Up to 999 copies (count-down system) Auto Exposure Mode, Manual Exposure Mode, Text Exposure Mode, Text/Photo Exposure Mode and Photo Mode 1-sided copy in the full size mode Leading Edge 1/8Trailing Edge,1/8 Rear Edge 1/8 AC120V, 50/60Hz 1.43kW Width : 26-1/4 Depth : 29-1/4 Height : 40-3/lb 10 to 32 C with fluctuation of less than 10 C per hour 15to 85% RH with fluctuation of less than 10% RH per hour 3,000 lux or less O 1 or less

Kinds of Paper

Copy Paper Size

Paper Feeding System

Warm-up Time First Copy Copy Speed (Approx. copies/min)

Zoom Ratios

Multiple Copies Exposure Control Lost Image Power Requirements Power Consumption Dimensions Weight
ENVIRONMENTAL CONDITIONS TEMPERATURE HUMIDITY AMBIENT LUMINATION LEVELNESS RELIABILITY SUGGESTED MONTHLY VOLUME MCBF COPIER ONLY MCBF SYSTEM ANTICIPATED MONTHLY VOLUME
160,000 91,000 66,000 10,500
200,000 112,000 81,000 16,000
ACCESSORIES ELECTRONIC DOCUMENT HANDLER FINISHER LARGE CAPACITY CASSETTE DUPLEX CABINET BASE 2 DRAWER CABINET BASE WITH DUPLEX TANDEM DRAW BASE WITH DUPLEX HARD DISK DRIVE KIT 32MB MEMORY SUPPLIES WITH SPECIFICATIONS STARTER ITEM NUMBER CONTENTS OF ONE UNIT UNIT YIELD UNITS PER CARTON COMPATIBILITY WITH OTHER COPIERS TONER ITEM NUMBER REPLENISHING METHOD CONTENTS OF ONE UNIT UNIT YIELD UNITS PER CASE COMPATIBILITY WITH OTHER COPIERS PHOTOCONDUCTOR ITEM NUMBER TYPE YIELD COMPATIBILITY WITH OTHER COPIERS DISPOSAL STAPLE CARTRIDGES ITEM NUMBER QUANTITY PER UNIT ITEM NUMBER QUANTITY PER UNIT ITEM NUMBER QUANTITY PER UNIT ITEM NUMBER QUANTITY PER UNIT CONSUMABLES WITH SPECIFICATIONS UPPER FUSING ROLLER LOWER FUSING ROLLER CLEANING BLADE WEB ROLLER

Finisher FN-106 Types of Trays Modes Kinds of Paper Top Offset Tray, Bottom Offset Tray Non-Sort Mode, Sort Mode, Group Mode, Staple Mode Top Offset Tray Non-Sort Mode Plain paper (16 lb to 24 lb), recycled paper Exclusive paper Thick paper (24-1/4 lb to 41-3/4 lb), translucent paper, OHP transparencies Bottom Offset Tray Sort Mode, Group Mode Plain paper (16 lb to 41-3/4 lb), recycled paper Staple Mode Plain paper (16 lb to 21-1/4 lb), recycled paper Paper Size Capacity Top Offset Tray: 11 X 17L to 5-1/2 X 8-1/2 Bottom Offset Tray: 11 X 17L to Letter Top Offset Tray Plain paper (20 lb), recycled paper : Max. paper size 11 X 17L to 5-1/2 X 8-1/2, 250 sheets Exclusive paper : Thick paper, translucent paper, OHP transparencies = 20 sheets each Bottom Offset Tray Plain paper (20 lb), recycled paper : Letter L or smaller, 1,000 sheets : Larger than Legal L, 500 sheets Stapling Power Source Power Consumption Dimensions Weight Accessories Acceptable paper size: 11 X 17L to Letter Acceptable number of copies: 2 to 30 sheets Supplied from copier 63W or less Width : 21-1/4 Depth : 24-3/4 Height : 38-1/2 Finisher : 78-1/4 lb Staple Cartridge, 3,000 staples/cartridge 1 piece
Finisher FN-5 Types of Trays Modes Kinds of Paper Top Offset Tray, Bottom Offset Tray Non-Sort Mode, Sort Mode, Group Mode, Staple Mode, Hole Punch Mode and Folding Mode Non-Sort Mode, Sort Mode and Group Mode Plain paper (16 lb to 24 lb), recycled paper Exclusive paper : thick paper, translucent paper, OHP transparencies Staple Mode, Hole Punch Mode and Folding Mode Plain paper (16 lb to 21-1/4 lb), recycled paper Capacity of Bins Plain paper, recycled paper: Refer to the chart below Exclusive paper: OHP transparencies (max. paper size: Letter), thick paper, translucent paper = 10 sheets each Punching Power Source Power Consumption Dimensions Weight Accessories Acceptable Paper size: 11X17L to Letter Punch Hole: 2-Hole or 3-Hole Supplied from copier 96W or less Width: 40-1/2 207-3/4 lb Staple Cartridge, 5,000 staples/cartridge 1 piece
Paper Size Top Offset Tray 100 sheets 100 sheets Bottom Offset Tray Corner Staple 2-Point Staple 2500 sheets (no staple) 2000 sheets (no staple) 1500 sheets (no staple) 1000 sheets (no staple) 100 sets or 1000 sheets 200 sets or 2000 sheets 200 sets or 1000 sheets 100 sets or 1000 sheets 100 sets or 100 sheets #Sheets/ Copy Set 2 to 50 sheets 2 to 50 sheets 2 to 50 sheets 2 to 50 sheets 2 to 15 sheets 2 to 10 sheets 2 to 10 sheets -

Depth: 26-1/4

Height: 43-3/4
Non-Sort Sort Group Crisscross Sort Corner

LetterC LetterL

11 X 17L, 100 sheets LegalL 5-1/2 X 8-1/sheets Letter 100 sheets 10 sheets 10 sheets 30 sheets
11 X 17L to Letter LetterC Sort Side Group 11 X 17L, Staple LegalL, LetterL Center 11 X 17L, LetterL Staple 11 X 17L, Crease LetterL 11 X 17L Half- Non-Sort, Sort, Group Folding Fold Staple 11 X 17L Non-Sort, Sort, Group 11 X 17L ZFold Staple 11 X 17L 11 X 17L (ZFolded) + LetterC Mixed Z-Folded *Z-Folded: 5 Orig. + sheets/set Detection Unfolded* Unfolded*: 25 sheets/set
50 sheets (no staple) 100 sheets 50 sheets (no staple) 100 sheets 100 sheets Z-Folded: 100 sheets Z-Folded + Unfolded*: 1000 sheets (no staple) Z-Folded: 100 sheets Z-Folded: 100 sheets Z-Folded + Unfolded*: Z-Folded + Unfolded*: 1000 sheets 2000 sheets -

2 to 30 sheets

*Only 1117L size paper can be Z-folded. Therefore, if a stack of mixed-size originals (1117L and other sizes) is copied in Mixed Original Detection mode, the copy set will contain a mix of Z-folded and unfolded copies.
Mailbin Finisher FN-503 Types of Trays Modes Kinds of Paper Top Offset Tray, Bottom Offset Tray, Mailbins (5 bins) Non-Sort Mode, Sort Mode, Group Mode, Staple Mode and Hole Punch Mode Top Offset Tray Non-Sort Mode Plain paper (16 lb to 24 lb), recycled paper Exclusive paper Thick paper (24-1/4 lb to 41-3/4 lb), translucent paper, OHP transparencies Hole Punch Mode Plain paper (16 lb to 24 lb), recycled paper Bottom Offset Tray Staple Mode Plain paper (16 lb to 21-1/4 lb), recycled paper Hole Punch Mode Plain paper (16 lb to 24 lb), recycled paper Mailbin Sort Mode, Group Mode and Hole Punch Mode Plain paper (16 lb to 24 lb), recycled paper Paper Size Top Offset Tray: 11 X 17L to 5-1/2 X 8-1/2 Bottom Offset Tray: 11 X 17L to Letter Mailbin: 11 X 17L to 5-1/2 X 8-1/2L Capacity Top Offset Tray Plain paper (20 lb), recycled paper : Max. paper size 5-1/2 X 8-1/2, 250 sheets Max. paper size 11 X 17L to Letter, 500 sheets Exclusive paper : Thick papers = 20 sheets; translucent paper, OHP transparencies = 10 sheets each Bottom Offset Tray Plain paper (20 lb), recycled paper : LetterL or smaller, 1,000 sheets Larger than LegalL, 500 sheets Mailbin Plain paper (20 lb), recycled paper : 200 sheets/bin Stapling Punching Acceptable paper size: 11 X 17L to Letter Acceptable number of copies: 2 to 50 sheets Acceptable paper size: 11 X 17L to Letter Punch Hole: 3-Hole (2-Hole is an option) Punch Hole: 2-Hole Power Source Power Consumption Dimensions Weight Accessories Supplied from copier 63W or less Width : 26-3/4 Depth : 24-1/2 Height : 38-3/4 Mailbin Finisher : 107 lb Staple Cartridge, 5,000 staples/cartridge 1 piece

Large Capacity Cassette C-306 Kinds of Paper Paper Size Capacity Power Source Power Consumption Dimensions Weight Plain paper (16 lb to 24 lb), recycled paper Letter C, A4C 3,400 sheets (20 lb) Supplied from copier 30W or less Width : 11-1/4 31-1/4 lb Depth : 17-1/2 Height : 19-1/4
Large Capacity Cassette C-306L Kinds of Paper Paper Size Capacity Power Source Power Consumption Dimensions Weight Plain paper (16 lb to 24 lb), recycled paper LegalL, LetterL, Letter C, A4L, A4C 3,400 sheets (20 lb) Supplied from copier 40W or less Width : 17-1/4 36-1/4 lb Depth : 17-1/2 Height : 19-1/4
POWER REQUIREMENTS Voltage: 120VAC/60Hz, 1500W, Single Phase, Grounded Outlet. Outlet: For optimum performance the outlet should be a Dedicated Line. The voltage between HOT and GROUND, should be 120VAC 7V The voltage between NEUTRAL and GROUND, should be no more than 0.5V The voltage between HOT and NEUTRAL, should be 120VAC Voltage Fluctuation: Frequency Fluctuation 10%(Copying performance assured) 15% (Paper feeding performance assured) 50/60 Hz 0.3%
INSTALLATION REQUIREMENTS
A. To ensure safety and utmost performance from your Minolta copier, it should NOT be installed in an area: 1. Which is exposed to direct sunlight 2. Which is in the direct air current of an air conditioner, heater or ventilator. 3. Where it can be splashed with liquids 4. Which has poor ventilation. 5. Which does not have a level stable floor 6. Where the copier may be exposed to sudden fluctuations in temperature or humidity.
7. 8. Where ammonia gas is generated. Which is dirty or where it will receive undue vibration.
PRECAUTIONS FOR USE A. 1. Never place a heavy object on the copier, or subject the copier to shocks. 2. Insert the power plug all the way into the outlet. 3. Do not remove any covers or panels while the copier is making copies. 4. Do not turn OFF the power switch while the copier is making copies 5. Provide proper ventilation when making a large number of copies continuously. 6. Never use flammable sprays near the copier. 7. If the copier becomes inordinately hot or produces abnormal noise turn it OFF and unplug it. 8. Do not bring magnetized objects near the copier. 9. Be sure to turn off the power switch at the end of the work day, or in case of a power failure. 10. Use care not to drop paper clips, staples, or other small pieces of metal into the copier.
B. The Printhead of this copier uses laser diodes that emits laser beams. Use the following precautions when servicing this area of the copier. When service needs to be performed in the laser beam path, such as when working around the printhead or PC drum, be sure to turn the copier OFF. If the job requires that the power cord be left plugged in, observe the following precautions: Take off your watch, rings, and any other reflective object and wear laser protective goggles. At the job site, select a place that is as far as possible away from the users and is enclosed by walls. Do not bring highly reflective tools into the laser beam path. MODEL Di450 EDH-3 FN-105 FN-106 PF-115/208/7D C-306/306L Di450/Di550 Di450/Di550 Di450/Di550 Di450/Di550 Di450/Di550 Di450/Di550 FN-503 Di450/Di550 Di450/Di550 Di450/Di550 ITEM_NUMBER 4003-7995-21 4641-7995-21 4643-7995-21 4644-7995-21 4640-7995-21 4642-7995-21 7661-4002-11 7662-4002-11 7663-4002-11 7666-4002-02 7664-4002-02 7660-4002-20 7665-4612-21 7669-4002-15 7667-4002-04 7667-4002-13 DESCRIPTION PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL PARTS MANUAL GENERAL SERVICE MANUAL FIELD SERVICE MANUAL OPTIONS SERVICE MANUAL QUICK GUIDE OPERATOR MANUAL SERVICE TRAINING CBT PARTS MANUAL MANUAL KIT MAINTENANCE CARD TRUNK INVENTORY DEALER_COST $9.00 $9.00 $9.00 $9.00 $9.00 $9.00 $10.00 $20.00 $20.00 $10.00 $10.00 $50.00 $9.00 $133.00** 4.50.25

** Price subject to change as new manuals are added to the kit. SERVICING JIGS DESCRIPTION Safety Switch Jig Cable Holding Jig DS Roll Jig DS Finger Jig DS Shaft Jig Interlock Jig Jig Scanner Front Jig Scanner Rear Jig Developer
ITEM NUMBER 1067-7901-01 4002-7903-01 1136-7904-01 1136-7905-01 1136-7906-01 1136-0756-01 4002-7904-01 4002-7905-01 4002-7902-01

QUANTITY 1

FOR PRODUCT TECHNICAL SUPPORT, The hours are, 9:AM to 5:PM EST, Monday through Friday, except for Wednesday 10:30AM to 5:PM. We can be reached at 1-800-851-7619.
WARRANTY Please refer to the Warranty and Special Programs section of the Dealer Service Support Manual item number 9005-9005-18.
SERVICE TRAINING Audience Training Method Audience Training Method Audience Classroom Pre-requisite Certification Training Method Di620/520 trained technicians (EP4000/5000 recommended) Hybrid CBT/Web Based testing and certification on-line Di250/350 trained technicians Hybrid CBT/Web Based, testing on line; plus Supplemental Training Module, testing and certification on-line Minolta Analog technicians Hybrid CBT/Web Based, plus Supplemental Training Module; testing on-line. Classroom Training

ASTM DATA SHEET

MODEL: Di450 TEST SYSTEM D450 EDH-3 FN-105 C-304 PF-115 OZONE EMISSIONS: DECIBLE LEVELS: 0.037 ppm 37.2 Stand by 55.5 Copy Process
INPUT: 120V60Hz Monthly volume, N(n*176) Number of copies, n, in test(from Table 1) Copying time, Ct(from Table 2) Idle time, It<60Min-Ct> Number of Jobs, j, in test(from Table 1) Test Results(1-h test) A Plug-in energy B Warm-up plus standby energy C Standby energy D Energy-saver energy E Copying energy plus standby F Energy-saver delay time G Recovery energy plus energy-saver energy Calculations, All Copiers H Warm-up energy,Er<B-C> I Copying energy,Ec<E-C> J Recovery energy,Erc<G-D> K Copying energy per copy,Ec/n Ec/n*0.001 L Energy saver time per hour<It-j*F> M Fraction energy-saver time<L/60> Calculations, Copiers Without Auto Shut-off N Plug-in energy per standerd month<A*489> O Warm-up plus standby energy per standard month<B*20> P Energy-saver time per month<(M*176)+35-(5*F/60)> Q Standby energy per standard month<C*(211-P)> R Energy-saver energy per standerd month<D*P> Calculations, Copiers With Auto Shut-off S Plug-in energy per standerd month<A*519> T Warm-up plus standby energy per standard month<B*22> U Energy-saver time per month<(M*176)+3-(3*F/60)> V Standby energy per standard month<C*(179-U)> W Energy-saver energy per standerd month<D*U> Calculations, All Copiers X Machine energy per standard month-independent at volume Em=(N+O+Q+R)or(S+T+V+W) Y Total energy per month Et=Em+(Ec/n+Erc)N Z Avarage total energy per copy Etavc=(Em+(Ec/n+Erc)N)/N

3.93 Min 56.07 Min 16 Single-sided Copies Watt Hour 0.70 408.90 323.00 214.50 382.00 0.39 Min 242.10 B.T.U. 2.39 1395.17 1102.08 731.87 1303.38 826.05
Duplexed Copies Watt Hour B.T.U.

397.40

1355.93
85.90 293.09 59.00 201.31 27.60 94.17 0.41 1.40 0.00041 0.00140 49.83 Min/Hr 0.83

74.40 0.52 0.00052

253.85 1.76 0.00176
363.30 8995.80 149.15 9642.03 31992.35
1239.58 30693.67 508.89 32898.62 109157.91

50993.49 751236.54 30.05

173989.78 2563219.09 102.53 753910.15 30.16 2572341.45 102.89
MODEL: Di550 TEST SYSTEM Di550 EDH-3 FN-105 C-304 PF-115 OZONE EMISSIONS: DECIBLE LEVELS: 0.037 ppm 37.7 Stand by 56.9 Copy Process
3.44 Min 56.56 Min 16 Single-sided Copies Watt Hour 0.50 405.90 321.10 235.30 386.00 0.39 Min 245.90 B.T.U. 1.71 1384.93 1095.59 802.84 1317.03 839.01

385.60

1315.67
84.80 289.34 64.90 221.44 10.60 36.17 0.45 1.54 0.00045 0.00154 50.32 Min/Hr 0.84

64.50 0.45 0.00045

220.07 1.53 0.00153
259.50 8929.80 150.59 9123.79 35432.85
885.41 30468.48 513.80 31130.37 120896.87

53745.94 330013.30 13.20

183381.13 1126005.37 45.04 329943.85 13.20 1125768.42 45.03
MATERIAL SAFETY DATA SHEET Product Name: MT TONER 502[] Date Printed:5-Sep-2000
1. PRODUCT AND COMPANY IDENTIFICATION
Page:1/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000 [],denoted with an alphabet.
Product Name: MT TONER 502[] used for: Di450, Di550
Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
2. COMPOSITION / INFORMATION ON INGREDIENTS

Substance [

Preparation [ X ]
Hazardous Ingredients: Chemical Name: Carbon black (5-10%) CAS No.: 1333-86-4 OSHA Z-Tables(USA): 3.5mg/m3 NTP(USA): Not listed Symbol(EC): Not listed DFG-MAK(EC): Not listed
EEC-No.: 215-609-9 ACGIH-TLV(USA): 3.5mg/m3 IARC Monographs: Group 2B R-Phrase(EC): Not listed Worksafe-TWA(Austl): 3mg/m3
Major Ingredients: [Generic Name] Polyester resin Carbon black Polyolefin wax Magnetite Organic compound +++: Suppliers confidential information
[CAS No.] +++ 1333-86-4 +++ +++ +++
[%] >80 5-10 1- 5 1- 5 1- 5
3. HAZARDS IDENTIFICATION
Page:2/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Most Important Hazards and Effects of the Products For Human Health: This toner is not classified as a human carcinogen. No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: Dust explosion (like most finely divided organic powders)

4. FIRST-AID MEASURES

Symptoms of Overexposure: No symptoms expected with intended use. Routes of Entry: Eye contact, inhalation, ingestion Information Inhalation: If symptoms are experienced, remove source of contamination or move victim to fresh air and obtain medical advice. Skin Contact: Flush with gently flowing water (preferably lukewarm) and soap for 15 minutes or until particle is removed. If irritation does occur, obtain medical advice. Eye Contact: Do not allow victim to rub eye(s). Flush with gently flowing water (preferably lukewarm) for 15 minutes or until particle is removed. Have victim look right and left, and, then up and down. If irritation does occur, obtain medical attention. DO NOT attempt to manually remove anything stuck to the eye(s). Ingestion: If irritation or discomfort occurs, obtain medical attention immediately. Note to Physician: None Further Information: None

5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media: CO2, water spray, foam and dry chemical Extinguishing Media to Avoid: Full water jet Special Firefighting Procedures: None Fire and Explosion Hazards: If dispersed in air, like most finely divided organic powders, may form an explosive mixture. Protection of Firefighters: Use self-contained breathing apparatus (SCBA).
6. ACCIDENTAL RELEASE MEASURES
Page:3/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Personal Precautions: None Environmental Precautions: None Methods for Cleaning Up: Wipe off with paper or cloth. DO NOT use vacuum cleaner when a large amount is released. It, like most finely divided organic powders, may create a dust explosion. Further Information: None

7. HANDLING AND STORAGE

Handling Technical Measures: Precautions: Safe Handling Advice: Storage Technical Measures: Storage Conditions:
None None Try not to disperse the particles.
None Keep container closed. Store in a cool and dry place. Incompatible Products: None Packing Materials : Bottles or Cartridge designated by Minolta. Further Information: None
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Engineering Measures Ventilation: None required with intended use. Control Parameters(As total dust) OSHA-PEL(USA): 15mg/m3 ACGIH-TLV(USA): 10mg/m3 DFG-MAK(EC): 6mg/m3 Worksafe-TWA(Austl.): 10mg/m3 Personal Protective Equipment Respiratory protection: None required when used as intended in Minolta equipment. Hand Protection: None required when used as intended in Minolta equipment. Eye protection: None required when used as intended in Minolta equipment. Skin Protection: None required when used as intended in Minolta equipment. Other: For use other than normal customer-operating procedures (such as in bulk toner processing facilities), goggles and respirators may be required. Hygiene Measures: Wash hands after handling. Further Information: None
9. PHYSICAL AND CHEMICAL PROPERTIES
Page:4/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Appearance Physical State: Solid Form: Powder Color: Black Odor: Faint odor Particle Size(m): 5 - 15 Boiling Point: Not applicable Melting Point(C): No data available Softening Point(C): 110 - 125 * Flash Point: Not applicable pH: Not applicable Explosion Properties: No data available Density(g/cm): 1.2 * (bulk density: 0.41 *) Solubility in water: Negligible Flammability: No data available Oxidizing Properties: No data available Ignition Temperature(C): > 400 * Vapor Pressure: Not applicable Partition Coefficient, n-Octanol/Water: Not applicable

10. STABILITY AND REACTIVITY
Stability: Stable [ X ] Unstable [ ] Hazardous Reactions: Dust explosion, like most finely divided organic powders. Conditions to avoid: Electric discharge, throwing into fire. Materials to Avoid: Oxidizing materials. Hazardous Decomposition Products: CO, CO2 Further Information: None
11. TOXICOLOGICAL INFORMATION
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data Acute Toxicity: Inhalation, LC50(mg/l): >1.93 (Rats,4hour) * (This was the highest attainable concentration.) Ingestion(oral), LD50(mg/kg): >2000 (Rats) * Dermal, LD50(mg/kg): No data available Eye irritation: Slight conjunctival irritation (Rabbits) * Skin irritation: Not an irritant (Rabbits) * Skin sensitizer: No signs (Guinea-pig) * Mutagenicity: Negative * (AMES test) (*= Based on data for other Minolta Products with similar ingredients)
MATERIAL SAFETY DATA SHEET Product Name: MT TONER 502[] Date Printed:5-Sep-2000 Page:5/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Local Effects: see Chronic Toxicity or Long term Toxicity Chronic Toxicity or Long Term Toxicity: Prolonged inhalation of excessive dust may cause lung damage. It is attributed to lung overloading, a generic response to excessive amounts of any dust retained in the lungs for a prolonged interval. Use of this product, as intended, does not result in inhalation of excessive dust. In a study in rats by chronic inhalation exposure to a typical toner, a mild to moderate degree of lung fibrosis was observed in 92% of rats in the high concentration(16mg/m) exposure group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle(4mg/m) exposure group. But no pulmonary change was reported in the lowest(1mg/m) exposure group, the most relevant level to potential human exposures. Carcinogenicity IARC Monographs: Not listed NTP(USA): Not listed OSHA Regulated(USA): Not listed In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human carcinogen). This evaluation is given to Carbon Black for which there is inadequate human evidence, but sufficient animal evidence. The latter is based upon the development of lung tumors in rats receiving chronic inhalation exposures to free carbon black at levels that induce particle overload of the lung. Studies performed in animal models other than rats have not demonstrated an association between carbon black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation containing carbon black demonstrated no association between toner exposure and tumor development in rats.

16. OTHER INFORMATION

NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 1 Flammability: 1 Reactivity: 0 HMIS Rating: The National Paint and Coating Association(USA): Health: 1 Flammability: 1 Reactivity: 0 Recommended Uses: Toner for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co.,Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist.
MATERIAL SAFETY DATA SHEET Product Name: MT TONER 502[] Date Printed:5-Sep-2000 Page:8/8 MSDS No.:PPC-0683 Date Prepared: 17-May-2000
Literature References: ANSI Z400.1-1993 TRGS 220: Sicherheitsdatenblatt fr gefhrliche Stoffe und Zubereitungen ISO 11014-1 Commission Directive 91/155/EEC The Material Safety Data sheet: A Practical Guide to First Aid: Canadian Centre for Occupational Health and Safetys publication HMIS IMPLEMENTATION MANUAL: National Paint & Coatings association IARC(1996): IARC monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans, Vol. 65, Printing Process and Printing Inks, Carbon Black and Some Nitro Compounds, Lyon, pp.149261 H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.Morrow, U.Mohr, S.Takenaka, and R.Mermelstein(1991) Pulmonary Response to Toner upon Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp.280-299.
MATERIAL SAFETY DATA SHEET Product Name: MT Starter 502 Date Printed:5-Sep-2000
Page:1/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
Product Name: MT Starter 502 used for: Di450, Di550 Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.

Hazardous Ingredients: Chemical Name: Carbon black (< 1%) CAS No.: 1333-86-4 OSHA Z-Tables(USA): 3.5mg/m3 NTP(USA): Not listed Symbol(EC): Not listed DFG-MAK(EC): Not listed
Major Ingredients: [Generic Name] Ferrite Polyester resin Polyester resin Carbon black +++: Suppliers confidential information
[CAS No.] +++ +++ +++ 1333-86-4
[%] 80-90 10-20 1- 5 < 1
Page:2/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
Most Important Hazards and Effects of the Products For Human Health: This starter is not classified as a human carcinogen. No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: Dust explosion (like most finely divided organic powders)
Page:3/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
Page:4/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
Appearance Physical State: Solid Form: Powder Color: Black Odor: Faint odor Particle Size(m): 5 - 15(toner) 40 - 75 (carrier) Boiling Point: Not applicable Melting Point(C): No data available Softening Point(C): 110 - 125 * Flash Point: Not applicable pH: Not applicable Explosion Properties: No data available Density(g/cm): 3.2 * (bulk density: 1.3 *) Solubility in water: Negligible Flammability: No data available Oxidizing Properties: No data available Ignition Temperature(C): No data available Vapor Pressure: Not applicable Partition Coefficient, n-Octanol/Water: Not applicable
MATERIAL SAFETY DATA SHEET Product Name: MT Starter 502 Date Printed:5-Sep-2000 Page:5/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
MATERIAL SAFETY DATA SHEET Product Name: MT Starter 502 Date Printed:5-Sep-2000 Page:6/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
Page:7/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
NFPA Hazard Rating: The National Fire Protection Agency(USA): Health: 1 Flammability: 1 Reactivity: 0 HMIS Rating: The National Paint and Coating Association(USA): Health: 1 Flammability: 1 Reactivity: 0 Recommended Uses: Starter for Electrophotographic Equipment Restrictions: Information on this data sheet represents our current data and the best opinion as to the proper use in handling of this product under normal conditions specified in our Users Manual. However, neither Minolta Co.,Ltd. nor any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we do not guarantee that these are the only hazards which exist.

MATERIAL SAFETY DATA SHEET Product Name: MT Starter 502 Date Printed:5-Sep-2000 Page:8/8 MSDS No.:PPC-1643 Date Prepared: 7-Aug-2000
MATERIAL SAFETY DATA SHEET Page:1/7 Products Name: Photoconductor 502 Date Printed:5-Sep-2000
MSDS No.: DPO-0283 Date Prepared: 7-Aug-2000
Product Name: Photoconductor 502 used for: Di450, Di550 Supplier Identification: Minolta Corporation 101 Williams Drive, Ramsey, New Jersey 07446, U.S.A. Telephone: 201-825-4000 Emergency Telephone No. Contact your regional poison control center.
Hazardous Ingredients: None present
Major Ingredients: [Generic Name] Substrate Aluminum drum Coating layer Binder resin Photosensitive material Pigment

[CAS No.] +++

[%] <99 > 1

+++ +++ +++

+++: Suppliers confidential information
MATERIAL SAFETY DATA SHEET Page:2/7 Products Name: Photoconductor 502 Date Printed:5-Sep-2000
Most Important Hazards and Effects of the Products For Human Health: No symptoms expected with intended use. For the Environment: No data are available on the adverse effects of this product on the environment. For Others: None Specific Hazards: None
Symptoms of Overexposure: No symptoms expected with intended use. Routes of Entry: None Information Inhalation: Skin Contact: Eye Contact: Ingestion: No No No No treatment treatment treatment treatment is is is is required. required. required. required.
Note to Physician: None Further Information: None
Suitable Extinguishing Media: Extinguishing Media to Avoid: Special Firefighting Procedures: Fire and Explosion Hazards: explosive hazards. Protection of Firefighters:
CO2, water, foam and dry chemical None None This material has no unusual fire No special equipment is required.
Personal Precautions: Environmental Precautions: Methods for Cleaning Up: Further Information:
Not applicable with intended use. Not applicable with intended use. Not applicable with intended use. None
MATERIAL SAFETY DATA SHEET Page:3/7 Products Name: Photoconductor 502 Date Printed:5-Sep-2000
Handling Technical Measures: None Precautions: This product will be scorched in the case of fire. Safe Handling Advice: None. Storage Technical Measures: None Storage Conditions: Keep and Store in a cool and dry place. Incompatible Products: None Packing Materials: Cardboard box designated by Minolta. Further Information: None
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering Measures Ventilation: None required with intended use. Control Parameters OSHA-PEL(USA): Not Applicable DFG-MAK(EC): Not Applicable ACGIH-TLV(USA): Not Applicable Worksafe-TWA(Austl): Not Applicable
Personal Protective Equipment Respiratory protection: None required when used as intended in Minolta equipment. Hand Protection: None required when used as intended in Minolta equipment. Eye protection: None required when used as intended in Minolta equipment. Skin Protection: None required when used as intended in Minolta equipment. Other: None Hygiene Measures: Wash hands after handling. Further Information: None

MATERIAL SAFETY DATA SHEET Page:4/7 Products Name: Photoconductor 502 Date Printed:5-Sep-2000
Appearance Physical State: Solid Odor: Odorless

Form: Cylinder

Color: Green
<<Results of the coated compounds on the aluminum substrate.>> Boiling Point: Not applicable Melting/Softening Point: No data available Flash Point: Not applicable pH: Not applicable Explosion Properties: Not applicable Density(g/cm): 2.7 Solubility in water: insoluble Flammability: Not applicable Oxidizing Properties: No data available Ignition Temperature(C): No data available Vapor Pressure: Not applicable Partition Coefficient, n-Octanol/Water: Not applicable
(*= Based on data for other Minolta Products with similar ingredients)
Stability: Stable [ X ] Unstable [ ] Hazardous Reactions: None Conditions to avoid: None Materials to Avoid: None Hazardous Decomposition Products: CO, CO2 Further Information: None
Health Effects from Exposure: No symptoms expected with intended use. Toxicological Data <<Result of the coated compounds on the aluminum substrate.>> Acute Toxicity: Inhalation, LC50(mg/l): Not applicable Ingestion(oral), LD50(mg/kg): >2000 (Rats) Dermal, LD50(mg/kg): Not applicable Eye irritation: Very slight irritation (Rabbits) Skin irritation: Not an irritant (Rabbits) Skin sensitizer: No data available Mutagenicity: Negative (AMES test)
MATERIAL SAFETY DATA SHEET Page:5/7 Products Name: Photoconductor 502 Date Printed:5-Sep-2000 MSDS No.: DPO-0283 Date Prepared: 7-Aug-2000
Local Effects: No data available Chronic Toxicity or Long Term Toxicity: None Carcinogenicity IARC Monographs: Not listed NTP(USA): Not listed OSHA Regulated(USA): Not listed (*= Based on data for other Minolta Products with similar ingredients)
Mobility: No data are available on the adverse effects of this material on the environment. Persistence/Degradability: No data are available on the adverse effects of this material on the environment. Bioaccumulation: No data are available on the adverse effects of this material on the environment. Ecotoxicity Behavior in Sewage Works: No data are available on the adverse effects of this material on the environment. Aquatic Toxicity: No data are available on the adverse effects of this material on the environment. Ecological Data(EC) Csb Value(EC): No data are available on the adverse effects of this material on the environment. AOX-Remark(EC): No data are available on the adverse effects of this material on the environment. BsB5 Value(EC): No data are available on the adverse effects of this material on the environment. Significant Components(EC): Not applicable