PRODUCT & TECHNICAL SUPPORT BULLETIN
B u s i n e s s P r o d u c t s G r o u p DATE: TO: FROM: SUBJECT: REF. NO.: Di650: 03/13/02 All Minolta Digital Copier Dealers Service Support Di650 FLASH/ROM TO CORRECT SC49-01 AND SC49-02 CODES. 3481A 007
Flash ROM Available as a part PARTNERLINK Downloadable
SUPERSEDES BULLETIN DATED 3/06/02
NOTE: Read the ISW documentation carefully before upgrading the copier. Make sure that you have a complete understanding of the programming procedure prior to install. Failure to do this may cause damage to the Di650, thus making it inoperable. Only Di650/Di750 certified technicians should perform this upgrade. PROBLEM: 1. There is the possibility that the Di650 may erroneously display SC49-01 or SC49-02. 2. The display of the Pi6500 Pro does not change from "Idle" to "Copier is in power saving mode" when the Di650 goes into low power. SOLUTION: The following Flash/ROM upgrade has been made available to correct the issues listed above. Flash Version (programmed using the ISW utility) 1. VIF File Name: optmv107.exe Check Sum: 643A Upgrading the Di650 Flash ROM's requires the new ISW (In-System Writer) utility version 3.35e for Minolta. Refer to your Di650 Service Manual pages 5-1 through 5-4 and the ISW Service Manual pages 1-1 to 2-14 for information on the upgrade procedure. The files needed to carry out this upgrade are available for immediate download from the PartnerLink Web site. A CD containing these files will also be made available for a fee.

LINE REMOVED

Minolta Corporation, 101 Williams Drive, Ramsey, NJ 07446-1293 (201) 825-4000

Page 2 of 2

REF. NO.: 3481A
NOTE: Prior to upgrading the Di650 and after upgrading the Di650, print out the "Machine Management List 1". This is done by entering the 36 Mode, selecting 7-List Output Mode, and then selecting 1-Machine Management List 1. The following ROM Versions will be indicated after a successful upgrade: ROM Version Image Control I 1 Image Control I2 Image Control I3 Image Control I4 Image Control I5 Printer Control C1 Printer Control C2 Printer Control C3 Printer Control C4 Printer Control C5 Finisher N VIF V 20-0000 20-0000 20-0000 20-0000 20-0000 14-0000 14-0000 13-0000 11-0000 11-0000 12-0000 07-0000
1. For your convenience a Flash ROM CD is available through the Minolta Order Department at a Cost of $25.00. The part number is 7660-4024-03. Phone number for order department is 201-785-2488, for the west coast dealers we offer an additional phone number 1-800-604-5588. 2. The upgrade is also available for immediate download from our web site, PartnerLink.MinoltaUSA.com

file: file: file: file: kn3576d.exe PCL-CF-UPDATE PCL-PARALLEL-UPDATE 13jbpt555es1.exe

IP-422

file: ver_ter634b.exe PCL-PARALLEL file: PCL-PS-UPDATE file: file: ver_ter634b.exe PCL-PARALLEL file: PCL-PS-UPDATE file: file: 13wkfw5100as1.exe 13sqdrnt5100.exe 13stdrnt5100.exe 13wkdrnt5100.exe 13wndrnt5100.exe

IP-423

file: ver_ter634b.exe
6.34b 5.10.0 5.10.0 5.10.0a_patch 15 17UFL0 6.34b 5.10.0 5.10.0 5.10.0a_patch or 41 25.12.0 25.12.11 CLP0 25.10.11 CLP0 25.10.0
file: ver_ter634b.exe PCL-PARALLEL file: 13wkdrnt5100.exe PCL-PS-UPDATE file: 13wndrnt5100.exe file: 13wkfw5100as1.exe

IP-432

**Version 32 is for Type 1 Control Boards. Version 41 is for Type 2 Control Boards
PCL-PARALLEL-UPDATE PCL-PS-PARALLEL-UPDATE
file: 13wbdrkm25120.exe file: 13wgdrkm25120.exe

IP-424

PCL-PS-PARALLEL-UPDATE file: 14nbdrkm25100.exe

PAGE 07

Page 7 of 120

Konica Legacy 7235

Image Control IP Controller Image Control 511_NIC IP Controller IP Controller Image Control 511_NIC IP Controller IP Controller Image Control 511_NIC IP Controller IP Controller
Image Control 511A_NIC IP Controller Image Control 511A_NIC IP Controller
CLP0 25.10.41 6.34b 6.3.0
file: ver_ter634b.exe file: 13rpdrnt630.exe

IP-511

6.34b 6.3.0

** BASE

file: 13rpfw620p.exe 7

Force 65

13-ULN6.34b 26.4.16 6.34b 26.4.3 55-5.5.4h 5.5.8d 25-24 5.5.4h 5.5.8d 6.34a 26.5.6.34a 26.5.0

IP-511A

file: 14kwknfw34bs1.exe file: 14kxptkm2643s1.exe

IP-601 IP-601M

Image Control Operation Video IP Controller IP Controller Image Control Operation IP Controller IP Controller
Image Control Operation Video KN-306 IP Controller

file: file:

13jmpt554hs1.exe 13sbpt558ds1.exe

Force 75

IP-602
file: 13tjknfw634as1.exe FLOPPY-UPDATE file:

13tbfwkm2650.exe

Force 85
Image Control Operation KN-306 IP Controller

PAGE 08

Page 8 of 120

MINOLTA

Page 9 of 120

*** NOTE:

MODEL IC# VERSION Reference

before 12/13/2005

COMMENTS Updated by Please See Page 05

Minolta Legacy

EP1080 EP1083 EP2010 EP2050 IC2A IC2A IC2A IC2A MASTER IC2B MSC+PANEL IC2A MASTER IC202A MSC/PANEL 50G013 50G008 50G010 50G021 10G026 50G006 50G106 10G004 71G007 50G021 10G013 20G011 50G008 10G010 50G021 10G013 20G011 50G008 10G010 50G018 10G013 20G008 50G006 10G007 50G004 10G007 1.4 1.90A 2.11 6.37 6.37 IC2A IC14 IC15 U8 Flash ROM PWB-M PWB-N PWB-M PWB-N 50G208 1177-11G2-00-11 1177-11G2-00-12 2.11 6.37 10G013-02 NU002 10G013-02 NU002

PAGE 11

Page 11 of 120

Minolta Legacy Di750

Status Control 1 Printer Crontrol C1 Printer Control C2 Printer Control C3 Printer Control C4 Operation 01 Operation 02 Operation 03 Operation 04 Operation 05 EDH F VIF V ISW 56-51 52-68 52-68 52-68 52-68 52-22 3.39e or higher 56-45-32

Black and White Models 6

3061f 3061f 3061f 3061f 3061f 3061f 3061f 3061f 3061f 3061f 3061f 3061f 3529a 3061e 3061e 3061e 3061e 3061e 3061e 3061e 3061e 3061e 3061e 3061e 3061e 3976d 3976d 3976d 3976d 3976d 3976d 3976d 3976d 3976d 3976d 3976d 3976d 3976d 3976d 3976d ver 45 ver 20
Please read the bulletin regarding this version

3104-instructions

Di750PE
Status Control 1 Printer Crontrol C1 Printer Control C2 Printer Control C3 Printer Control C4 Operation 01 Operation 02 Operation 03 Operation 04 Operation 05 EDH F VIF V
Image Printer Crontrol C1 Printer Control C2 Printer Control C3 Printer Control C4 Operation 01 Operation 02 Operation 03 Operation 04 Operation 05 EDH F Finisher N VIF V Punch z- folding h Punch h
ver 41 ISW ver 3.42e Konica Minolta FTP

Di5510

Image control I-1 Image control I-2 Image controll I-3 Image controll I-4 Image control I-5 Print control C-1 Print control C-2 Print control C-3 Print control C-4 Print control C-5 Finisher N Image control I-1 Image control I-2 Image controll I-3 Image controll I-4 Image control I-5 Print control C-1 Print control C-2 Print control C-3 Print control C-4 Print control C-5 Finisher N
13-CMB0 10-0000 10-0000 10-0000 10-0000 14-0000 11-0000 14-0000 10-0000 15-0000 32-0000 13-CMB0 10-0000 10-0000 10-0000 10-0000 14-0000 11-0000 14-0000 10-0000 15-0000 32-0000
4653B 4653B 4653B 4653B 4653B 4653B 4653B 4653B 4653B 4653B 4653B 4654B 4654B 4654B 4654B 4654B 4654B 4654B 4654B 4654B 4654B 4654B

ver 13-CMB0

file: 56tei013cmb0.exe
ISW ver 3.42e Konica Minolta FTP

For FN-121 / FN-10 only

Di7210

ver 13-CMB0 file:

56rei013cmb0.exe

For FN-121 / FN-10

PAGE 12

Page 12 of 120

Minolta Legacy CF900 IC2C IC89C IC93C IC94C IC2I 51G039 49G024 00G0A7 00G0A7 50G2352 2352

Color Models

IC2I SMP SMP SMP IC21 SMP SMP IC2I SMP/FLASH Engine IR MSC/PANEL IR PRINTER PIC MSC/PANEL IR PRINTER PIC MSC/PANEL PRINTER PIC Service Utility
50G014-00 00G216-00 00G01A-00 00G01B-00 50G017-00 00G023-00 00G024-00 50G014 00G110-00 00G0-24 23G0-07 4004-00G0-47-00 4005-23G0-05-00 4004-50GO-24-01 4004-52G0-12-00 4004-00G0-47-00 4005-23G0-05-00 4004-50G0-24-00 4004-52G0-12-00 4004-00G0-47-00 4004-50G0-24-00 4004-52G0-12-00 4004-2BG0-00 v1.0

2609 3543a 3543a 4011B 4011B 4011B 4011B 4012B 4012B 4012B 4012B 4013B 4013B 4013B 3477

SPECIAL SPECIAL

SPECIAL

CF911P

CF9001

CF1501

FLASH CARD Ver. 52 FLASH CARD Ver.52 FLASH CARD Ver.52 FLASH CARD Ver. 52 FLASH CARD Ver. 52 FLASH CARD Ver. 52 FLASH CARD Ver. 52 FLASH CARD Ver. 52 FLASH CARD Ver.52 FLASH CARD Ver.52 FLASH CARD Ver.52 3462-set up guide

CF2001

CF2001P

PAGE 13

Page 13 of 120

Fax/ Multifunction

Page 14 of 120
Konica Minolta MF1600 MF1600E MF1700

N/A N/A IC6M IC8M

Fax Models
1.00A-09 1.00A-03 FCGOH-1 FHEXX-2 5.22 5.6E
TIN 96-014 TIN 96-014 TIN97-TIN 96-014 TIN 96-014 Corrects issues w/ Hydrafax Lite 4677 file: A4SFKMBTHV107.bin Corrects issues w/Hydrafax Lite Prints Broadcast Report Prints Broadcast Report

MF1800 MF1800E MF1900

IC6M IC8M IC6 ICU9 ICU10 FLASH ROM
FCN0E-1 FHEXX-2 1.00A-24 V2.0B V2.0B V 1.29 V1.07

MF2500 MF2600

MF2800 MF2900 MF3500

1.00A-24

MF3600

ICU9 ICU10 FLASH ROM

V2.0B V2.0B V 1.29 V1.07
Prints Broadcast Report Prints Broadcast Report

MF3800 MF3900 MF5500/E

file: A4SFKMBTHV107.bin Clear Drum Counter before 20K Clear Drum Counter before 20K Corrects TX T.1.1 errors Corrects TX T.1.1 errors

IC0 IC1 IC23 IC23

B6A0A0 B6A0A0 AL100J AL100J

MF5600

PAGE 15

Page 15 of 120

Print Controllers & Print Servers

Page 16 of 120

Non-Fiery CN3101e

CF2002-CF3102

Print Controllers

APP MIOSS APP

4334-30G0-66-00 4334-3FG0-04-00 4334-30G0-66-00

4631 4631

PCL ONLY Controller ver 68 file: IP711_v68.exe PCL ONLY Controller

IP-711 8020-8031 Pi1802e

NIC w/ Fax Non-Fax
Di152-Di183F Controller (PCL)

A.38 1.27 1.47 1.52

3616 3616
file: v147tp1.zip Note: Fax version may need to install EPROM on PWB-C # 4021-6611-01 ver 2.0 file: A3SA4SV200PCLF00.bin

Pi1803e Di1811p Pi3502

Controller (PCL)

ver 2.0

NIC Card Controller (PS)
Di200-Di351f Controller (PCL)

6.33A 2.05AS 2.05S

4672 3386A 3385A
Smart Media Card Must be Purchased for PostScript type Chip ver 66 Phase 3.5 32MB Compact Flash Card Upgrade Procedure Drag & Drop ver 66 Phase 3.5 32MB Compact Flash Card Upgrade Procedure Drag & Drop

Pi3505e PCL

Di2010-Di3510f

Phase 3.5 NIC Card

4030-10HJ-66-02 B2A

4671 4772

Pi3505e PS

Phase 2.5 NIC Card

4030-10HK-66-02 B2A
Pi4700e Di470 Di450, Di550

NIC Card Controller NIC Card Controller

6.33A 4 6.33A 1.02

downgrade for Di450 / Di550 Compatibility this must be done while connected to a Di470 Solutions Database Answer ID # 4772 Peripheral Mode Controller Type 6 with HDD Controller Type 6 without HDD
Mode 2 Mode 3 Pi5501 Di450, Di550 Mode 5 Black and White NIC Card Controller 6.33A 3.4672
Peripheral Mode Scan to e-mail, scan to FTP

Fiery Print Controllers

Pi5500 Di450, Di550 Di470
Controller Patches Patches Patches
ver 2.0 1-2IORP 2-4CB77 3-5Q7BX
System Software Generic MIB Correct Free Form issues C++ and Registry Errors WINNT4.0 Peripheral Modes scan to HDD Pi5500 scan to HDD, scan to e-mail Pi5500

Mode 3 Mode 4

PAGE 17

Page 17 of 120

Black and White Pi6200

Di520, Di620

Fiery Print Controllers System Software A4 and A3 issues System Software Generic MIB Restart / Hang Free Form Issue Euro Characters Apache Web Server Open PORTS Quark & Adobe Controller Initializing Uploading Data Duplex Issue SEAC Issue DocBuilder LPR PORT 515
Controller Patches Controller Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Controller
ver 1.11 1-13BFM.PS ver 1.0 1-2I0RP 2-5403P 3-4KB5H 4-5XLM1 5-7WUW1 6-8FMQO 7-647FI 8-8JUL9 9-9IL4R 10-7ZHIC 11-9L4SV 12-9FC5L 13-CX18E ver 1.1i 1-minolta.pcl ver 1.1e minolta 1-BZCYP 2-FQFQA03034-A 3-A0FN9 4-DBR3D 5-EP5SP 1-PRA25 ver 1.0

1-703NE

Pi6500 Pro

Di551, Di650

External
4399A 4399A 4399A 4399A 4399A 4399A 4399A 4399A 4399A 4399A 4399A 4399A 4399A 4394
Pi6500e PCL Di551, Di650 Pi6500e+HDD Di551, Di650
MIB PATCH System Software Generic MIB MegaPatch Pagescope Light Appletalk Concurrency Issue Scan Reboot
file: fiery_apachev1337_pt1pra25.exe Apache version 1.337

Internal

Controller Patches Patches Patches Patches Patches Patches Patches Controller

Patches

4403C 4403C 4403C 4403C 4403C 4403C
Pi7200e PCL Di5510, Di7210

System Software

4678 KM MIB

Pi7200e

PS+HDD

Di5510, Di7210

Pi7500 Di750
Controller Patches Patches Patches Patches Patches Patches Controller Patches Patches Patches Patches Patches Patches Patches Patches Patches Controller Patches Patches Patches Patches Patches

SECURITY PATCHES

Patch File Name file: 1-AXLE9 file: 1-D4VEP Cumulative Patch File: 1-h219.exe File: 20atptsecjan2005s1.exe
File: 20atptsecfeb2005.exe
File: 20atptsecmar2005s1.exe

File: secmay2005.exe

File: 20atptsecjun2005s1.exe
File: 20atptsecjul2005s1.exe File: 20auptsecaug2005s.exe

PAGE 19

Page 19 of 120

Controller

S300 CFEXTERNAL Local Install
Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop

***** CONTINUED ******

PATCH 1-KS505 1-KS509 1-KS5OP 1-KS50D 1-KS5OH 1-KS5OJ 1-KS5OL 1-KS5ON 1-L5PMX 1-LKOG1 1-LRDCA 1-LTFST 1-MD1U0 1-MD1TW 1-MRR2J 1-N80K1 1-N80K7 1-N80KC Microsoft Patch MS05-044 MS05-045 MS05-046 MS05-047 MS05-049 MS05-050 MS05-051 MS05-052 MS05-053 MS05-054 MS06-001 MS06-002 MS06-007 MS06-008 MS06-011 MS06-013 MS06-014 MS06-015 Patch File Name File: 20atptsecoct2005s1.exe
File: 20atptsecnov2005s1.exe File: 20atptsecjan2006s1.exe
File: s300_50ck_s300_31cm_ptsecfeb2006.s1.exe File: s300_50ck_ptsecmar2006.s1.exe File: s300_50ck_ptsecapr2006.s1.exe
File: fiery win xpesp1security 1.exe
Please see DLBT0701004EN00.pdf for more details of the 8 included Patches
File: fiery win xpesp1security 2.exe

PAGE 20

Page 20 of 120
Color Fiery Print Controllers IP901

Supports

the following models
ver 1.1 1-DSRD9 1-GJDLD 1-KTLOE 1-KSOAF

ver 1.1

50C-KM

C500, CF5001

File: 1-DSRD9.exe File: 1-gjdld C500 Patch.exe
file: IP901_v1_1_Composite-Patch.iso (There

are 28 Patches)

IP901 1KAY8B.SIT
New output profiles to increase the saturation of prints in the default mode. a. CMYK simulation profile: ISO coated as default CMYK simulation profile.
EXTERNAL Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Local Install
Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop Remote Desktop

Microsoft Patch MS05-007 MS05-008 MS05-011 MS05-012 MS05-013 MS05-014 MS05-015 MS05-016 MS05-017 MS05-018 MS05-019 MS05-020 MS05-025 MS05-026 MS05-027 MS05-041 MS05-042 MS05-036 MS05-037 MS05-038 MS05-039 MS05-040 MS05-041 MS05-042 MS05-043 MS05-044 MS05-045 MS05-046 MS05-047 MS05-049 MS05-050 MS05-051 MS05-052 MS05-053 MS05-054 MS06-001 MS06-002 MS06-007 MS06-008 MS06-011 MS06-013 MS06-014 MS06-015
Patch File Name File: secmar2005.exe
File: 20atptsecmay2005s1.exe
File: 20atptsecjul2005s1.exe File: EFI-XPe-Security-Update-August-2005.exe
File: 20atptsecoct2005s1.exe

PAGE 22

Page 22 of 120
ver 2.0 1-JCKC9 1-JCNCL 1-KSO9X

System Software ver 2.0

Adds a Link to WebTools "Software Updates" RIP1 WHILE PRINT 2 * Need a Total of 1 GB Memory
file: 20atpt1jckc9s1.exe file: ip901_pt1jcncls1.exe
file: ip901(8050_C500)_pt1kso9xs1.exe
Increases smoothness of Graphics Composite patch [also includes new PC and MAC drivers] Make sure to install: JCNCL first ** All these patches are contained under NELLY 1-
8050 EXTERNAL Patches Patches Patches Patches 1-NELLY 1-JK0PD 1-JQK4R 1-KSOAG
IP901 does not start printing VDP file as soon as the first record is done. Color Adj Issue Hangs when printing when Progressive is ON New output profiles to increase the saturation of prints in the default mode. a. CMYK simulation profile: ISO coated as default CMYK simulation profile. b. RGB source profile: Fiery RGB as the default RGB source profile. c. Output profile: the output profile updated from V2 to V4.
Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches 1-N1LUM 1-H7MO5 1-I5ZPD 1-JIAL9 1-K690T 1-KI5G2 1-KZEPP 1-L8DC7 1-L8DC7-r 1-LVS4U 1-NGML9 1-NOL6J 1-OL05S 1-OV1H9 1-OYTWD 1-PRA33 1-PKE09 1-QZXUG
Output Color Profile- Increase Saturation Improves CMYK Simulation and RGB Source Profile
VPS jobs with imposition settings do not print correctly file: 20atpt1h7mo5s1.exe file: 20auppwin1i5zpds.exe file: 20aupt1jial9s1.exe Back Cover/Front Cover Mixed Media Issue Custom Size Paper Offset Values Two Way Communication from driver
Unable to assign paper catalog if the back cover is Side Two. Tab Shift not performing to functional specification file: 20aupt1kzepps1.exe TechKnow 4-28-2006 TechKnow 4-28-2006 Disables Only Compatible with 8050 Upgrades Hot Folder version. Resolves overprint and trapping. Booklet printing does not work when enabling EKC. When upgrading from 1.x to 2.x archived jobs won't print Output margin correction Post Inserter and Offset Sort Issues When Printing Line Screen, fine lines and text objects prints w/ broken lines.

ver 3.0

System Software ver 3.0
SecurityUpdates 1-14U5WB 1-15D0B5 1-QRIU7 1-15FE5J 1-16LBTC 1-15RA6V 1-16TABO
HC ic305v3.0r pt 1-1484WD.zip
Staples are in the wrong position.
PS ioerror error, offending command "imagemask". PDF file processes very slow.
toggle patch to change MIB from KONICA MINOLTA ver. to Generic ver.
"File conversion failed" error occurs when a JPEG File is dropped into the Hot Folder.
PSWC shows Waste Paper" is "Full" when the punch unit is not installed.
Print Range overrides are not reflected. Change minimum page size to 2.5 X 3 inch (Update Color Profile Patch) for C65hc_ONLY Engine pauses frequently when printing booklets using the PB-501 Pre-Req: 1-14U5WB Canceling jobs results in a Fiery crash. Error message "The service calibrator is currently use by operator" appears PDFs created from iPhoto causes Fiery to hang on import. Pre-Req: 1-14U5WB Loss of Layout/ Orientation in driver & CW5 Job Properties. Pre-Req: 1-14U5WB Printer Preferences window is blank when launched from Color Profile Suite 2.0.X.X Embedded fonts are replaced w/ a Substitute font when printing. Support fortab paper for multi-punch w/ GP-501 Pre-Req: 1-14U5WB Output shows thin white lines when Image Smoothing is ON & Image Quality is Best Media Weight not honored for calibration measurement page. Pre-Req: 1-14U5WB and 1-17FCFK
Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches
1-17FCFK 1-17W6LP 1-16MNVI 1-16WPDD 1-179B8A 1-17C6PI 1-17GZYA 1-17KWLI 1-187CC 1-18NBNI

PAGE 35

Page 35 of 120

IC-306

Controller Controller Patches Patches Patches Patches

ver 1.1 ver 1.0

System Software Fiery PRO80 ver 1.1 (for C8000) System Software 70-60C-KM ver 1.0 (for C6000/ C7000)
US Region Specific Color Profiles The file name is garbled in the USB Media Server The output trays are not constraint in both Windows and MAC drivers. No constraints on installable option when Bi-Di is enabled.
1-174R99 1-189GOW 1-18AH4V 1-18AJW4

C6000 C7000 C8000

The patches are included in Patch 1-18GIH5

PAGE 36

Page 36 of 120

IC-401

Controller Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches Patches
1-9NM85 1-D3FNB 1-F2YKC 1-FJ5J2 1-JTKRL 1-CVF7H 1-D17SB 1-D3FNB 1-DES1S 1-ED8KC 1-ESDPA 1-GLS3T 1-GLS45 1-GMGV5 1-H4OI4 1-HS9CF 1-IQM7Z 1-JBTXU 1-KOBTB 1-PRA25 1-Y1ATY
KMBS Pagescopelight Logo Cumulative Patches Guide in Tray B are not set correctly 100% Black prints in CMYK FreeForm printing would be stuck at Controller. PDF Causes Reboot Appletalk issue Enables A3 Wide and A3 Wide + support Cumulative Patches A4 or A3 paper sizes PS error message Files Generated by Jtman not able to Print Corrects Print to PS error QuarkXpress job that is printed as Seperation Some excel file results in missing or incorrect thickness of dotted lines Illustrator Files result in missing pics/ EPS files Can not delete a FreeForm2 master by PS command Error sending ASCII file via LPR command Adobe Illustrator CS 11.0.0 files will cause controller to Reboot Enable mailbox password will be switched to NO Tiff may not work properly with InDesign frile from MAC OS X file: fiery_apachev1337_pt1pra25.exe Apache version 1.337 Mac OS 10.5, paper is pulled from wrong tray with MimosaV2.0

Address Issue connected to a switching hub between the Printer and Network

System Software ver 1.01

1-W5C85 1-XL217 1-ZB8PP 1-Z5Q9E 1-105NZD 1-UIG65 1-V1NZ 1-VRY88 1-WA4ZQ 1-VLROP 1-XA7M0 1-ZAG86 1-10J8K9 1-119HPB 1-13YDY3
C253 C353 C353P C451 C550 C650

Fixes Various Errors

**Install first
corrects the Power Saver issue
Waking up from Power Save, Fiery goes through the wakeup cycle twice Unable to print after MFP is in Power Save mode with a local AppleTalk zone.
Patches to disable and re-enable Fiery sleep mode.
Printing Negative Image Instead of B/W Print without Authentication Allows MAC OS X 10.5 Driver to be available. [See Drivers section] When ZU-603 is installed, conflict is generated.
Engine Network ID does not appear on Configuration Page in DHCP Mode.
All pages except pages is rotated from InDesign on MAC Apache Server Update /version change 1.3.37 to 1.3.41. WebUpdates are not filtering out patches already installed on the system When printing many small files, CWS does not update status window Printing A3 or 11x17 with Z-fold and Staple=Off result in Job Error.

PAGE 43

Page 43 of 120

IC-412

Controller Update

ver 1.1 System Software

Fiery E10 50_45C-KM
file: IC-412 v11 System DVD.iso

C552 C652

1-13NTVP 1-13P18T 1-14GPV4 1-153Y89 1-14M9MH 1-15V8AX 1-17KPHR 1-16TAAM 1-16TAAM
Unable to print booklet with the cover being a different paper type than body
Corrects ColorCal Patches show as unknown Must install: 1-14GPV4 Updated: Fiery Remote Scan 5.5.2.9 Fiery Bridge 1.1.1.9 All the paper sizes are missing from the driver UI for Mac10.6 drivers. PreReq: 1-14GPV4 Unable to print on a Thick type of paper via PCL driver. PreReq: 1-14GPV4 After an overnight copier Power Save mode, a print job does not print. PreReq: 1-14GPV4, 1-15V8AX Variable data job will not print when combined with Impose settings. PreReq: 1-14GPV4
Patches Patches Patches Patches

IC-413

ver 1.0 System Software

Fiery E100 70-60C-KM

C6000 C7000

PAGE 44

Page 44 of 120

IC-601

PAGE 45

Page 45 of 120

bizhub Office Systems Desktop Printers

Page 46 of 120

Konica Minolta bizhub C10 Engine F/W Controller F/W NIC Engine F/W Controller F/W NIC Engine F/W Controller F/W NIC Engine F/W Controller F/W NIC Engine F/W Controller F/W NIC Engine F/W Controller F/W NIC Engine F/W Controller F/W NIC Engine F/W Controller F/W NIC Engine F/W Controller F/W NIC Engine F/W Controller F/W NIC 4139-50G2-1500 4139-V315-A1 4139-V320-A1 A0FD-50G0-0500-00 A0FD30G0000805

version 60

CURRENT
FD-501 SD-501 FS-503 FS-607 FS-520 LS-501 RU-503/504 PB-501 DF-609
C6500 /C6500P ineo+6500 C6501 ineo+6501 C65hc
Image Control I1 Image Control I2 Image Control I3 Image Control I4 Image Control I5 Print Control C Multi Folder H Multi Folder H Saddle Stitcher B Saddle Stitcher B Stapler N1 Stapler N1 Stapler N2 Stapler N2 Stacker S Stacker S RU R Perfect Binder J Perfect Binder J ADF F
A03U0Y0-00I1-G00-60 A03U0Y0-00I2-G00-50 A03U010-00I3-G00-60 A03U0Y0-00I4-G00-10 A03U0Y0-00I5-G00-40 A03U0Y0-00C1-G00-60 15BM0Y0-00H1-G00-30 A0H00Y0-00H1-G00-60 15AQ0Y0-00B1-G00-30 A0H20Y0-00B1-G00-60 15AE0Y0-00N1-G00-26 AOGY0Y0-00N1-G00-60
A0DR0Y0-00N2-GMC-34 A0DR0Y0-00N2-GMC-32
** Please install New Memory Board with version if you have firmware version 25 and below. FD-501 FD-503 SD-501 SD-506 FS-503 FS-521 FS-607 FS-520 LS-501 LS-505 RU-503/504 PB-501 PB-502 DF-609

p/n-A03UH04013

15AT0Y0-00S1-G00-31 a0h10Y0-00S1-G00-10 A04J0Y0-00R1-G00-40 A0750Y0-00J1-G00-20 A0v90Y0-00J1-G00-10 A0520Y0-00F1-G00-10

PAGE 75

Page 75 of 120

PAGE 76

Page 76 of 120
KIP Wide Production Print System

Page 77 of 120

KIP Scanner K105x08a 1.31 S/N beginning with 1050 All S/N beginning with 1050 and S/N10512993 and below
3000plus 3000plus Scanner

K105x17b 2.1

S/N beginning with 1051 S/N 10512994-3109 and all S/N 10513137 and above

Scanner

K116x08a 1.12

K109x03a

K103x04b

K120x03b

K120x04a

PAGE 78

Page 78 of 120

KIP 9000 K115x08a

990x02a

600 Scanner 600 Scanner

1.31 2.1
1.31 for S/N 11000745 and lower 2.01 for S/N 11000746 and above

600a Scanner

2100 Scanner

2300 Scanner

PAGE 79

Page 79 of 120

MISC. Solutions

Page 80 of 120

MICROPRESS ver 8.XXXX (Release Soon) - version will be posted soon.
MICROPRESS ver 8.1.0.0km Build 1018
New System Software New Enhancements Enhanced Micropress Utility Applications
MICROPRESS ver 8.0.5.0km Build 891
Mac OS X 10.6 drivers now available; Supports PB-503 for the PrintStation 0120KM; Supports GP-501 for the PrintStation 095KM

Do not install any earlier firmware versions than those listed above. All Newer Copier Firmware are Supported. * Make sure that you use the mentioned specific twain drivers

Rev. May. 29, 2009

PAGE 92

Page 92 of 120

Integrated eCopy Machines
eCopy ShareScan version 4.6.5
B/W MFP MODELS FIRMWARE Open API ver
bizhub 361/ 421/ 501 bizhub 601/ 751

20-GJ1 N/A *

3.5 3.5
* Available 1st Qtr of 2010

Open API ver

bizhub C203 bizhub C220 bizhub C253 bizhub C280 bizhub C353 bizhub C360 bizhub C451 bizhub C550 bizhub C650 bizhub C552 bizhub C652
GK5-CG GC2-57 GK0-CG GC2-57 GJ0-CG GC2-57 GJ0-CG GJ0-CG GJ0-CG GC2-57 GC2-57
3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5 3.5
Make sure the following items are installed on your MFP's:
Do not install any earlier firmware versions than those listed above.

PAGE 93

Page 93 of 120

Integrated Equitrac

(Equitrac Integrated for Konica Minolta)

B/W MFP MODELS

v20 or higher v18 or higher
bizhub C203 bizhub C220 bizhub C280 bizhub C353 bizhub C360 bizhub C451 bizhub C550 bizhub C650 bizhub C452 bizhub C552 bizhub C652
vR5 or higher v54 or higher v54 or higher vR5 or higher v54 or higher vR5 or higher vR5 or higher vR5 or higher v26 or higher v26 or higher v26 or higher

PAGE 94

Page 94 of 120

Printgroove

Model Name
Serve Guide Queue Queue Client POD Driver - Windows POD Driver- MAC

Version

PSG0105031025828 PSG0105031025828 PGQ010503102353 1.5.03000 1.5.03000 1.5.03000
1.5.3 [Build: PSG0105031025828] - a.k.a v.1.5.3 1.5.3 [Build: PSG0105031025828] - a.k.a v.1.5.3 1.5.3 [Build: PGQ0105031023530] - a.k.a v.1.5.3 Version 1.5.03000 [ Build 0.0.86] Version 1.5.03000 [Build 1.5.34] Version 1.5.03000 [Build 1.50.44]
bizhub Pro 1050 DF-603 FS-503 LS-501/502 FD-501 SD-501 PB-501 IC Controller

Program

Print Control Image Control DF Control FS Control LS Control FD Control SD Control PB Control Print Controller

30-COK0

Use most Current Base Firmware
PostScript language is required.
bizhub Pro 920 DF-606 FS-604 FS-509/516 PK-503 ZU-602 IC-203
Print Control Image Control DF Control FS Control FS Control PK Control ZU Control Print Controller

30 20-COK0

bizhub Pro 950

Print Control

GU0-11
** Please see SOLUION ID's: TAUS0902885EN00, TAUS0702782EN01and TAUS1002405EN00 for additional information

PAGE 95

Page 95 of 120
bizhub Pro C6500 FD-501 SD-501 FS-503 FS-607 LS-501 RU-503/504 IC-303 IC-304 IC-408
Print Control Image Control Multifold Saddle Stitcher Stapler Control Stapler Control Stacker Control Relay Unit Print Controller Print Controller Print Controller
G00-25 G00-25 G00-20 G00-20 G00-20 G00-20 G00-20 G00-20 ver. 1.02 ver.2.0 TBA ver.1.01 TBA

PostScript language is required. Need to provide User ID and Password in order to print from Printgroove POD Queue

PAGE 96

Page 96 of 120
Model Name bizhub Pro C500
Program Print Control Image Control Operation FNS Control
Printer Controller Printer Controller
FS-513/FS-606 IP-901 IC-302 IC-405 IC-301 Model Name Konica Minolta 8050
Version 12-0000 12-PBD0 13-000 14-CNO0 12-000 10-000
ver. 2.0 System 6 SP1 PostScript language is required. ver. 2.1 System 6 SP1 Need to provide User ID and Password in
ver. 2.0 or later System 8e order to print from Printgroove POD Queue
ver. 1.0 SP2 Version 51-0000 51-0000 50-0000 16-0000 Note

FS-115/FS-215

PostScript language is required. Need to IP-901
provide User ID and Password in order to print ver. 2.0 System 6 SP1 from Printgroove POD Queue

Rev. Oct. 01, 2008

Note- The Printgroove POD driver and Queue client software are resident on the Printgroove server. Most of the Printgroove updates usually include new versions Printgroove POD driver and Queue client software. The customer should always perform an Add Remove programs on their PC to remove the previous versions, reboot their PC, then download and install the new ones. The customer should always download and use the versions that come with the server as they are designed to work with the version of Printgroove that they come with.

PAGE 97

Page 97 of 120
Model Name Konica Minolta 7085

Program Print Control

Image Control Operation
RADF Finisher N FS-111/FS-211 PU-108/PU-109 PZ-108/PZ-109 VI-602 IP-602/IP-602M
FNS Control Punch Unit Punch+Z-Fold
Video I/F Board Printer Controller

NIC ROM

Version 20 C1 18-0000 C2 11-0000 C3 14-0000 C4 11-0000 44-43-43-43-43-43-0000 11-40 12-0000 NOA 26.5.0 ver.6.26A KN-306 6.34a
Need to change the Base Port number to 9100. This can be performed via the Web Utility Page for Netwrok Setup. However, the System password will be required to make this modification. The modification can be verified via the 7085 driver as 9101. Refer to the "How to Use Web Utilities [7085/IP-602] to Obtain Configuration

PAGE 98

Page 98 of 120
SOLUTIONS SUPPORT & Development

PAGE 99

Page 99 of 120

PAGE 100

Page 100 of 120

PAGE 101

Page 101 of 120
How to Test Outlet Voltage
Digital Copier Basic Information Cable Color Coded Guide RED PINK YELLOW GREEN GRAY
24V DC 12V DC + / - 2V 5V DC + / - 2V Ground Signal Line
Electrical Power Information

PAGE 102

Page 102 of 120
Caution: Please read our safety information before attempting any testing or repairs.
Working with live electrical current can be very hazardous. Testing voltage output requires working with electrical current. D not attempt this measurement without the proper tools and safeguards. To measure the voltage at an electrical outlet requires the use of a multimeter. Always test your test equipment for proper operation before use. Set the multimeter to AC voltage. The markings may appear as VAC, AC V, or a V beneath a wavy line. Choose the AC voltage closest to the voltage you will measure. Standard current in home and businesses in the USA is in the range of 110 to 120 volts. Some circuits used for equipment such as dryers, air conditioners, eletric stoves, ovens and other large equipments like the bizhub PRO 1050 may use volatge in the range of 220 to 240 volts. These heavy-duty circuits can be identified by their non-standard outlet plugs. While grasping the insulated portion of the probes (never touch the metal conductor during testing) place one probe into each of the two terminals. The multimeter will display the voltage.
Carefully remove the probes, being careful not to touch the metal part of the probes to anything or each other. The voltages should typically test in the range of 108 to 121 volts for most circuits. If voltage is higher or lower, professional electrical service may be required.
Additional information: http://www.allaboutcircuits.com/vol_1/chpt_3/9.html

Page 103

Page 103 of 120

120 Volt Line

Page 104

Page 104 of 120

220 Volt Line

Page 105

Page 105 of 120

250 Volt Line

Page 106

Page 106 of 120

PAGE 107

Page 107 of 120

PAGE 108

Page 108 of 120

How to Check Color MFP Firmware

PAGE 109

Page 109 of 120

Basic Copier Process

1. Charging [A] 2. Image Exposure [B] 3. Developing [C] 4. Transfer [D] 5. Fixing / Fusing [E] 6. Drum Cleaning [F]

PAGE 110

Page 110 of 120

COLOR WHEEL

RGB CMYK Hue
Red, Green, and Blue are the Primary Colors of Light. Cyan (Blue), Magenta (Red), Y (Yellow) and K (Black) are the Secondary Colors The quality of color which can be described by words such as red, yellow, blue, etc.
Brightness (Value) Saturation (Chroma)
The quality of color which can be described by words such as light, dark. The quality of color which can be described by words such as vivid, dull.

Page 111 of 120

Page 112 of 120
KONICA MINOLTA ENGINE COMPARISON CHART

PAGE 113

Page 113 of 120

PAGE 114

Page 114 of 120

PAGE 115

Page 115 of 120

Page 116

Page 116 of 120

Page 117

Page 117 of 120

Page 118

Page 118 of 120

Page 119

Page 119 of 120
SOLUTIONS SUPPORT & DEVELOPMENT GROUP

One Team

One Vision One Goal

Page 120 of 120