Windows and Mac Printer Setup Guide
This guide details how to set up a Windows PC from Windows 95 to Windows Vista Business along with how to set up an Apple Mac from OS9.2 to OS10.4 This guide will take you through how to set up: An IP-P2P port on Windows 95, 98 & ME An LPR and Standard TCP/IP port on Windows NT4 2000, XP, 2003 & Vista Business Appletalk on Mac OS9.2 IP printing on Mac OS10.3.9 & 10.4.10 Port Names
Windows 95, 98 & ME using the IPP2P Utility
1) First, download the IPP2P utility from the Konica Minolta website www.konicaminolta.eu You will need to click on the Support tab, then Business Solutions and then choose Application Programs and Network Utilities. When you are presented with three drop down boxes, choose Windows 95 and NT IP Peer-to-Peer Printing from the first drop down box, then your Windows operating system and finally English UK. Click Search. 2) You will then be presented with the IPP2P utility. To download it, click on Read Comment 3) Click on the option highlighted by the red arrow below
4) Agree to the licence agreement and save the file to the desktop of the PC 5) Close down Internet Explorer 6) Double click on the file you have downloaded which should be on the desktop and a WinZip window will pop up 2 Created by Stacey Hunt Konica Minolta Hotline Support (UK)
7) This WinZip window will most likely be in German. Click on the button indicated below with the red arrow as this means, Browse
8) Browse to the desktop and then place your curser in the field indicated below and press End on the keyboard.
9) At the end of the path, type \IPP2P, so your file path should now look like:
10) Click Unzip and you will get a message saying in German, 13 files unzipped successfully. Click on Schlieen to close WinZip. On the desktop, you will now have a folder called IPP2P. 3 Created by Stacey Hunt Konica Minolta Hotline Support (UK)
11) In the IPP2P utility you will have a SETUP.EXE file. Double click this file and follow the on screen instructions to install the utility. 12) Once installed, it will appear in the programs list under IP-P2P. The first box you will see is:
13) Click on Printers. and you will see the following box. Enter in the IP address, Name and Description and click Add as I have done. Make sure that under Flags it says SMP. If it does not, click on Select and Permanent.
Created by Stacey Hunt Konica Minolta Hotline Support (UK)

14) Then click OK.

You now need to set up the printer
1) 2) 3) 4) Click on Start\Settings\Printers Click on Add Printer Click Next to the first screen that pops up Choose Local Printer and click Next
5) Click on Have Disk and browse to the location of the driver 6) Once you have selected the driver the following box will appear giving you the name of the printer you are about to install. When installing a Fiery driver, choose the driver that ends in eu
7) Click Next 8) You will then be prompted for the port. The port will appear in the list as whatever you called it in the Description field in step 13 on page 4.
9) Click Next and the following box will appear. Select/change as appropriate
10) When asked if you would like to print a test page, select No and Finish the wizard. You will then need to configure the driver with the correct finisher, drawer base etc under Properties. 6 Created by Stacey Hunt Konica Minolta Hotline Support (UK)
Windows 2000, XP & 2003 Standard TCP/IP Port
Before you start, you need to have the driver to hand and know the IP address of the printer. 1) Windows 2000 Click on Start\Settings\Printers Windows XP & 2003 Click on either Start\Settings\Printers & Faxes Or Start\Control Panel\Printers & Faxes 2) Click on Add Printer 3) Click Next to the first screen and then choose a Local Printer attached to this Computer. Make sure Automatically detect and install my Plug and Play printer is UNTICKED

4) Click Next 7 Created by Stacey Hunt Konica Minolta Hotline Support (UK)
5) Select Create a new port and choose Standard TCP/IP Port
6) Click Next and a new wizard will start up
7) Click Next 8 Created by Stacey Hunt Konica Minolta Hotline Support (UK)
8) Type in the IP address of the printer in the top box and click Next
9) Choose Custom and click on Settings
10) Choose LPR and type in the queue name which is relevant to the printer you are installing. Please refer to PAGE 31 & 32 for list of QUEUE NAMES. Make sure you put a tick in LPR Byte Counting Enabled
11) Click OK and Finish the Standard TCP/IP Printer Port Wizard. 12) You will then be prompted for the driver. Click on Have Disk and browse to wherever the driver files are located. Once the correct driver files have been selected and youve clicked Next, the following screen will appear confirming the printer selection.
13) Rename the printer and set as the default printer if you wish. Then press Next
14) From this next screen, you can share the printer from your computer (or server). Please note that if you choose to share the printer from a particular PC, that PC must always be switched on. Whatever you use for the Share Name, will be the name of the printer that you connect to through either Network Neighbourhood/My Network Places or the Add Printer Wizard/Network printer.
15) On the next screen, you will be asked if you want to print a test page. Say No and finish the wizard. 11 Created by Stacey Hunt Konica Minolta Hotline Support (UK)
16) You then need to configure the driver. To do this, right click on the new printer icon in the Printers Folder and go into the properties. Depending on the driver you have set up, you will either see an Options, Device Options, Settings, Device Option Settings, Configuration etc tab. On most of the newer machines, and the Fierys, you can input the IP address of the printer and click either Gather Option Information or Update. If you dont have these options, you will need to configure the driver manually. You also need to make sure the paper size is set to A4. On Windows 2000, XP & 2003, click on the Advanced tab under the Properties and then Printing Defaults. After you have made sure/set the paper to A4 under here, do the same under Printing Preferences.

Windows NT4 does not have the option of selecting a Standard TCP/IP Port. You can only select an LPR Port. An LPR port only requires the IP address of the printer and the Queue/Port Name.
Windows Vista Business Standard TCP/IP Port
Before you start, you need to have the driver to hand and know the IP address of the printer. If you download the driver from www.konicaminolta.eu, we recommend that you save the driver to your desktop and then extract the files to a folder on your desktop. 1) Click on either: or: Start\Control Panel\Printers & Faxes Start\Settings\Printers & Faxes
2) Click on Add a Printer
3) This guide describes how to add a printer directly to your computer across a network without going through a server. With this in mind, select Add a local printer and click Next
4) Drop down the box to Create a new port, and choose Standard TCP/IP Port
5) From the top box of this next screen, choose Device Type: TCP/IP Device. Then enter the IP address of the Konica Minolta device. Click Next
6) On the screen below, choose Custom and Settings
7) Once you have clicked on Settings Change the Protocol to LPR. Enter the Queue Name appropriate to your Konica Minolta device and tick LPR Byte Counting Enabled. See pages 31 & 32 for a list of queue names.
8) Click OK and then Next 9) You will now be asked for the printer driver. Click on Have Disk
10) The following box will appear. Click Browse
11) Navigate to the location of the driver on your computer
12) Click Open and then OK 17 Created by Stacey Hunt Konica Minolta Hotline Support (UK)
13) Click Next to the following screen
14) Choose whether of not the Konica Minolta device is to be set as the default printer and click Next.
15) The driver will then begin to install. When asked if you want to Share the Printer, unless you are setting the printer up on a server or want people to print through your computer, you need to leave the driver set to Do not share this printer. Click Next.
16) You have now completed the Add Printer Wizard. Click Finish
17) You now need to configure the machine with any additional options you have attached to the machine. To do this, right click on the printer and select Properties. You should then have an Options or Configure tab. It very much depends on which driver you are installing as to where the additional options are located. Whichever driver, it should be under either Properties or Printing Preferences. Once you are done, click Apply and OK.
Setting Up a Printer on Mac OS9.2 AppleTalk must be enabled on the Konica Minolta Printer
1) Copy the PPD to: System Folder\Extensions\Printer Descriptions 2) Click on the Apple Menu in the top left hand corner of the screen 3) Click on Chooser 4) Click on Adobe PS 5) Select the printer from the list on the right 6) Click Create and when prompted, choose the PPD from the folder above 7) Click on Configure and add any installable features you have on your Konica Minolta machine. 8) Click OK and then OK again Your printer is now installed.

Setting Up a Printer On Mac OSX 10.3
Apple Macs are designed to only use the PPD file from the postscript printer driver. In order to set the printer up, copy the PPD into the following folder using the path as described below: Library/Printers/PPDs/Contents/Resources/en.lproj 1. Once you have done this, go to the Print Centre and click on Add. 2. Choose IP PRINTING from the first drop down box (You can also select AppleTalk) 3. Input the IP ADDRESS (If using AppleTalk, select your printer. If you get the option of print, hold or direct, choose print) 4. Input the queue name: For a list of queue names, please refer to page 31 & 32 of this booklet. (Not needed if using AppleTalk) 5. Drop down the box: PRINTER MODEL and select OTHER 6. Search for the PPD using the path above and select the PPD that you copied into the folder above earlier. 7. Next, make sure that the new printer is highlighted and go to PRINTER on the top toolbar. 8. Then click on SHOW INFO and change Name & Location to INSTALLABLE OPTIONS. 9. Select the finisher and drawer base that you have with your machine (if applicable). 10) Click on Apply Changes. (It may not look like anything has happened when you click on this button as the screen does not change, but the settings have been saved) The printer is then installed and ready for use.
Most of the new OSX10.3/10.4 drivers now have an installer file, which can be run from the Mac. This installer file puts the PPD into the above folder for you. It does not set up the printer. You have to do this manually by following the steps above.
Setting Up a Printer On Mac OSX 10.4
In order to set the printer up, copy the PPD into the following folder using the path as described below:
Library/Printers/PPDs/Contents/Resources/en.lproj
Most of the new OSX10.4 drivers now have an installer file, which can be run from the Mac. This installer file puts the PPD into the above folder for you. It does not set up the printer. You have to do this manually by following the steps below.
Installing an IP Printer (Recommended)
1) To install the printer, click on the blue Apple in the top left hand corner of the screen and choose System Preferences

2) Click on Print & Fax
3) The print dialog box will pop up. Click on the + sign and make sure IP Printer is selected in the top toolbar of the next screen that opens.
4) The Protocol must be set to Line Printer Daemon LPD. Enter the IP address of the printer and the queue name. For a list of queue names, please refer to page 31 & 32 of this guide.
5) Next click on Print Using and choose Other. Browse to the en.lproj folder as shown below to locate the PPD file for the Konica Minolta printer. On some of the latest Konica Minolta machines (C451, C550, C650, C203, C253, C353) the PDD will automatically be located for you).
6) Your print set up dialog box will now look like the one below. Once you have all the settings in place, click Add
7) A window will now pop up asking you to add any additional options you may have installed on the machine. Install the drawer base and finisher etc. that are attached to the machine. These settings are dependant on the options you have purchased with the machine and will differ from those shown below.
8) Click on Continue and the printer will now appear in the list of available printers to choose from. Your printer is now installed and ready for use 26 Created by Stacey Hunt Konica Minolta Hotline Support (UK)
Installing an AppleTalk/IP Printer
Most of the new OSX10.4 drivers now have an installer file, which can be run from the Mac. This installer file puts the PPD into the above folder for you. It does not set up the printer. You have to do this manually by following the steps below. 1) To install the printer, click on the blue Apple in the top left hand corner of the screen and choose System Preferences
3) The print dialog box will pop up. Click on the + sign to add a printer.
4) In the next screen that opens, make sure Default Browser is selected in the top toolbar. The Mac will then search the network for any machines with either AppleTalk or Bonjour enabled.
5) Highlight your chosen printer as in step 4 and click on the Print Using drop down box. Select Other. 6) Browse to the en.lproj folder as shown below to locate the PPD file for the Konica Minolta printer. On some of the latest Konica Minolta machines (C451, C550, C650, C203, C253, C353) the PDD will automatically be located for you).

7) Once you have located the PPD file, click Open. 8) Your print setup dialog box will now look like the one below. Click Add
9) A window will now pop up asking you to add any additional options you may have installed on the machine. Install the drawer base and finisher etc. that are attached to the machine. These settings are dependant on the options you have purchased with the machine and will differ from those shown below. 29 Created by Stacey Hunt Konica Minolta Hotline Support (UK)
10) Click on the Apply Changes button and the printer will now appear in the list of available printers to choose from. Your printer is now installed and ready for use

TCP/IP(LPR) Port Names

Device
7040PB (KC1-KC2) AXIS Bizhub 160, 161,162, 163, 210, 211, 250, 350, 360, 420, 500, 600, 750 C350 (Embedded PCL) C203, C250, C252, C253, C300, C351, C352, C353, C450, C451, C550, C650 (Emperon) Di1611, Di2011, 7216, 7220 Fiery Si Fiery X2e Fiery X3e (7832) Fiery X3e (7915-7920) Fiery X3e+ (8020-8031) Fiery XJ Fiery ZX IC-203 (920) IC-401 (C350) IC-402 (C351, C450) IC-405 (C500) IC-406 (C300, C352) IC-409 (C451, C550, C650) IC-611 (1050) IC-901 (130f) i-Data (LPR) IP-711 (CF2002, CF3102, 8020, 8031) IP-901 V1.0 & V1.1/IP-921 (CF5001, 8050, C550) IP-901 V2.0 (CF5001, 8050, C500) KL-3015 KN-101 KN-201, KN-301, KN-302, KN302A, KN-303 KN-306, KN-7013, IP-422, IP-423, IP-432, IP424 IP 511 IP 511A KN-305 (IP-413) KN7415 (IP-412) Pi3502 (Di251/Di351)

Port Name

print_7040 pr1 print Print print print print_Copier-M print_PRN-M print_08C-M print_20C-M print_31C-M print_Copier-M print_Copier-M print print_22C-KM print_35C-KM print_50C-KM print_30C-KM print_50_45C-KM PORT1 print pr1 or LPDPRT1 Print print_50C-K print_50C-KM xjdirect PORT_1 PORT1 pr1 L1 PORT1

Device name

Copier-M PRN-M 08C-M 20C-M 31C-M Copier-M Copier-M 22C-KM 35C-KM 50C-KM 30C-KM 50_45C-KM

50C-K 50C-KM

Pi3505e (Di2510, Di2510f, Di3510, Di3510f) Pi5500 (Di450, Di470, Di550) Pi6500e with HDD (Di551, Di650) Pi6500e without HDD (Di551, Di650) Pi7200e with HDD (Di5510, Di7210) Pi7200e without HDD SEH IC-105 * Note: All names are case sensitive.
PORT1 print_55BW-M print_65BW-M direct print direct lp1 55BW-M 65BW-M 65BW-M

SSD SUPPORT SOLUTIONS

IP-711 - ALL ACTIVE SOLUTIONS October 2006
This document contains information that was exported directly from Konica Minolta's SSD Support knowledge base. Some solutions may contain hyperlink references which originally contained links to graphic or text files. If you wish to view these files, you must access the solutions via SSD CS Expert Support on Konica Minolta's website, www.kmbs.konicaminolta.us.
Legal Notice This document is designed as a diagnostic tool, primarily for Konica Minolta's support personnel, and authorized service representatives. Konica Minolta recommends that all service be performed by an authorized service representative. Users are responsible for seeking advice of a Konica Minolta authorized service representative regarding the information, opinion, advice or content of this document. USER AGREES THAT USE OF THIS DOCUMENT IS AT USER'S SOLE RISK AND THAT THIS DOCUMENT IS PROVIDED ON AN AS IS BASIS WITHOUT WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF TITLE OR IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OTHER THAN THOSE WARRANTIES THAT ARE IMPLIED BY LAW AND INCAPABLE OF EXCLUSION. IN NO EVENT WILL KONICA MINOLTA OR THOSE ACTING ON ITS BEHALF BE LIABLE FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, DIRECT, INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES ARISING OUT OF YOUR USE OF THIS DOCUMENT.
Copyright 2006, Konica Minolta Business Solutions U.S.A., Inc.

IP-711

Solution ID TAUS0620964EN00 Solution Usage 5
Description Installation Guide, IP711. Solution IP711 Installation Guide. Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]] * Trademark ownership information

Solution ID

TAUS0624613EN00

Solution Usage

Description "Job has been done improperly, check the record" message on the operation control panel when printing, with Copy Track turned on and using an IP-711 controller. Solution CAUSE: With Copy Track enabled there is no Access number assigned in the driver or the Access number box has not been check off. (Enabled). SOLUTION: With Copy Track enabled on the copier, check the IP-711 driver to ensure there is an Access number and it is enabled, (checked off). Perform the following steps. 1. Right click on the driver and select Properties. 2. Click on Printing Preference. 3. Select the Job Management tab. 4. Check off the Access Code box (enable It.) and put in the corresponding Acess Number which was assigned when set up Copy Track on the copier. Example, 001,002,003, etc.

TAUS0626693EN00

Description How to change the default settings for the Scan Mode. Solution To specify the default settings of the Scan Mode, perform the following: 1. Press the [Scan] key on the copier operation panel to enter the Scan Mode. 2. Select the setting to make the default value in the Scan Mode. 3. Press the [Utility] key. 4. Touch the [Input] key. 5. Touch the [Reset Mode] key. 6. Touch [Scan] followed by [Set-up Mode]. 7. Touch [OK]. Note: You can set the default settings of the Scan Mode to factory default by touching [Factory Default].

TAUS0620961EN00

Description User's Manual, IP711. Solution IP711 User's Manual. Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]] * Trademark ownership information

TAUS0623365EN00

Description 'C:\WINNT\Explorer.exe' error window is displayed when attempting to select the printer properties of the PCL5c driver on a Microsoft* Windows NT or Windows 2000 client.

October 2006

Solution CAUSE: This issue may appear immediately following the installation of Microsoft's service pack (SP4) for Windows NT or Windows 2000 operating systems.
SOLUTION: Download the revised PCL5c printer driver, version 2.02 (filename: 13zbdr2k202s1.exe) from Konica's FTP site [[Print Driver Selector| URL http://www.konicabt.com/Support/Drivers]] on the Konica website and on the FTP site. * Trademark ownership information

TAUS0620967EN00

Description System Configurator, IP711. Solution 8020/8031/IP711 System Configurator. Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]] * Trademark ownership information

TAUS0621188EN00

Description Scan to E-mail, multiple originals scanned through the RADF are E-mailed individually, as single page PDF files. Solution CAUSE: The engine hard drive is not installed. SOLUTION: Install the engine hard drive (HD-131) (10GB) (Item# 960830). When using Scan to E-mail with the hard drive installed, multipage originals scanned through the RADF are E-mailed as a single multi-page PDF.

TAUS0623119EN00

Description CorelDRAW* 9 is not positioning the image correctly on the output. Solution CAUSE: CorelDRAW will not print correctly if the PPD (PostScript* Printer Description) is not installed correctly within CorelDRAW. SOLUTION: To make the CorelDRAW output print in the proper orientation, install the PPD by performing the following: 1. Print out a Microsoft* Windows test page and determine the correct PPD for the printer. 2. On the general tab of the print dialog box, click the "Use PPD" checkbox. If a PPD has not been previously loaded, a "Select PPD File" dialog will appear. 3. Browse to the folder containing the PPD (search.ppd will locate the proper folder). Select the PPD stated on the Windows test page and click OK. 4. Once the PPD is selected, click on the "Properties" button in the print dialog and choose the proper paper size and orientation. The document should then print properly. * Trademark ownership information

TAUS0623148EN00

Description How to select envelopes sizes for Tray 1. Solution Envelope sizes are not pre-set for Tray 1, but have to be programmed first in order to be selected. To set and select an envelope size, perform the following: 1. From the BASIC tab of the copier display select PAPER. 2. Select tray 1 and then press SIZE CHANGE. 3. Press CUSTOM SIZE. 4. Using the diagram of the paper orientation on the display, use X, Y, and the up/down arrows to input the size of the envelope. 5. Press SIZE REGISTRATION and then either size 1 or 2 to store the size for quick recall.
6. Select the size and press ENTER twice. 7. After this, select the stored size from the custom size screen. If the matching size envelope is selected in the print driver, envelopes will be pulled from Tray 1. If the size does not match, a paper mismatch error will be displayed on the display panel.

TAUS0623442EN00

Description How to disable FTP printing on the IP711. Solution To disable FTP printing, perform the following: 1. Access MIB Browser (Management Information Base). 2. Set the browser to SNMP version 1. 3. Access the SET command in the browser. 4. Enter OID (Object Identifier) No. of '1.3.6.1.4.1.2590.1.1.2.1.5.7.6.1.1.2.1'. Note: The syntax should be set to 'integer' type. 5. Set the OID value to 2. 1: Enable 2: Disable 6. Open Command Prompt window. 7. Type FTP IP711's TCP/IP* address. The 'ftp: connect: Connection refused' message should be disable with the OID value set correctly. * Trademark ownership information.

TAUS0621189EN00

Description Does the IP711 require the engine hard drive (HD131) to print? Solution The IP711 will perform basic printing without an HD131. 8020/8031/IP711 System Configurator. Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]] * Trademark ownership information

TAUS0621311EN00

Description Service Training Workbook, IP711. Solution For information about the Service Training Workbook for the IP711, see Media Bulletin #101. Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]]

TAUS0621398EN00

Description LPR printing is slow or hangs with Microsoft* Windows NT 4.0. Delays or failures may result when you print to a Windows NT 4.0 print server connected through line printer remote (LPR) to a shared printer using the Line Printer Daemon (LPD) service. CAUTION: This solution contains information about editing the registry. Before editing the registry, understand how to restore it if a problem occurs. For information about how to do this, view the [["Restoring the Registry"| URL http://techweb.konicabt.com/tpm/media/restore_registry.pdf]] Help topic in Regedit.exe or the [["Restoring a Registry Key"| URL http://techweb.konicabt.com/tpm/media/restore_regkey.pdf]] Help topic in Regedt32.exe. Solution CAUSE: With Windows NT 4.0 Service Pack 3 and later, the default TCP Ports for LPR are 721-731. The symptom only occurs if 11 or more jobs are simultaneously spooled in an NT spooler. Once the 11th job reaches the spooler, all jobs will pause for approximately 3 minutes between jobs. Changes can be made so that ports greater than 1,023 can be used to prevent LPR from running out of available ports or conflicting with reserved ports. There is a registry entries that allow line printer remote (LPR) to use any available port higher than 1,023. With this entry, LPR is no longer restricted to only using the 11 TCP Ports (721 through 731) and will not conflict with reserved ports, even on very busy print servers.

SOLUTION: In Service Pack 3 (or later), a new registry entry is automatically generated when a new LPR port is created. This setting is defined on a per printer port basis and defaults to 0, which is RFC compliant. To enable individual IP address ports to use TCP ports 1024 and higher, apply Service Pack 3 (or later) and then perform the following steps: 1. Start Registry Editor (Regedt32.exe) and go to the following key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\LPDSVC\lpr WARNING: Using Registry Editor incorrectly can cause serious problems that may require reinstallaton of the operating system. Konica or Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk. Notes: a. For information about how to edit the registry, view the "Change Keys And Values" Help topic in Registry Editor (Regedit.exe) or the "Add and Delete Information in the Registry" and "Edit Registry Information" Help topics in Regedt32.exe. b. Back up the registry before editing it and update your Emergency Repair Disk (ERD). 2. The installed LPR ports will be displayed on the right of the window. On the far right there will be a data value of (0) or (1) in parenthesis. The data value of (0) indicates that this LPR port uses ports 721-731, which is the default. The data value of (1) indicates that this LPR port uses any port greater than ( ) 1024. 3. To change a LPR port to use a port greater than 1024, perform the following: a. Double-click the entry to view the Edit DWORD Value window. b. Change the value data from 0 to 1, and then click OK. c. Repeat steps a and b as required to change other LPR ports. d. Close the Registry Editor window. e. Restart the Spooler Service for the changes to take affect. Type the following command at a command prompt: net stop spooler f. To restart the Spooler service, type the following command at a command prompt: net start spooler 4. For more detailed and updated information see Microsoft Knowledge Base Article - 179156. Note: The reference links are live in the document. 5. To view any PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]] * Trademark ownership information

TAUS0623010EN00

Description Where to get an TCP/IP* address calculator. Solution A freeware version of a TCP/IP address calculator or a TCP/IP subnet calculator. * Trademark ownership information

TAUS0623058EN00

Description Multiple scan blocks cannot be selected with the TWAIN driver. Solution CAUSE: Before selecting scan blocks, 'Separate Scan' is not selected, or after specifying a block by a rectangle, 'Select' button is not clicked before specifying the next block. SOLUTION: Before scanning from application, check 'Separate Scan'. Specify the block by a rectangle, and then click 'Select' button every time specifying the next block. Note: Some applications do not support the multi-block (multi-page) scan (i.e., Adobe* Acrobat*, Microsoft* Office, etc.). Konica has confirmed that the following applications support this function: Adobe* PhotoShop*, Imaging*, ePware* and Docuworks*. * Trademark ownership information

TAUS0623324EN00

Description How to change the location of the spool file in Microsoft* Windows 2000. Solution Changing the location of the spool file in Windows 2000. Note: The latest version of [[Windows Media Player| URL http://www.microsoft.com/windows/windowsmedia/download/default.asp]] must be installed to view the link.
* Trademark ownership information

TAUS0623359EN00

Description Unable to scan multiple pages to E-mail addresses. Solution CAUSE: File format not set to Adobe* Acrobat* PDF. SOLUTION: To set the file format to PDF, perform the following, 1. Select the Scan button. 2. Select Scan Mode tab. 3. Select Color File. 4. Select PDF file format. 5. Select Document Set tab 6. Select Separate Scan. Note: The E-mail destination is determined by the index list or the address that has been entered. * Trademark ownership information

TAUS0623858EN00

Description Scan error log list. Solution The Scan error log list provides some detail on the Scan error logs that are recorded on the main body. Note: To view the PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]] * Trademark ownership information

TAUS0624402EN00

Description Duplexed print jobs print out simplex. Solution CAUSE: The mixed originals option is selected in the driver. SOLUTION: This is a product limitation. Even though this may be an allowed copying function and the driver allows these functions to be selected, selecting the mixed original option in the driver will produce a less than desired finishing output.

TAUS0624674EN00

Description What is the command to view the PC TCP/IP* address on a Microsoft* Windows XP client? Solution At the command prompt, type = ipconfig. The Connection-specific DNS Suffix, IP Address, Subnet Mask and Default Gateway will be displayed. Note: To view the entire syntax selection for ipconfig, type = ipconfig /?. * Trademark ownership information

TAUS0624707EN00

Description "ACCESS CODE INVALID" message when printing from Microsoft* Windows 95/98/ME through a Windows 2000 or 2003 server. Printing from Windows
NT/2000/XP through the same queue is fine. Solution CAUSE: A possible corrupt spooler that only affects printing from non-NT based workstations. SOLUTION: Delete the printer and all associated driver files and then reload the drivers. For more detail, refer to Microsoft Knowledge Base Article - 260737. Note: To view the above PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]] * Trademark ownership information

TAUS0627737EN00

Description What is the default Network Management Utility administrator password? Solution The default password is 0000. Note: This password is set in TECH. REP MODE.

TAUS0629411EN00

Description Will Microsoft* Windows XP Service Pack 2 create printing problems? Solution Service Pack 2 (SP2) is, in many ways, a new XP, and there is no way to test every possible combination of hardware and software on which it might be installed. Practice due diligence and evaluate the specific XP deployment before installing XP SP2. There are several pre-installation steps that should be considered: 1. Understand the benefits of installing the service pack: a. Malware attachment warnings b. Malware download warnings c. Pop-up blocker d. Firewall turned on by default e. Windows Security Center GUI that lets end users see and manage security settings (this can be blocked in a managed environment) f. Enhancements to auto updates, including improvements for dial-up users g. Better management of browser add-ons and e-mail addresses h. A new wireless deployment wizard useful for small businesses 2. Grab a copy of the recovery document from http://snipurl.com/8gju. This document discusses how to recover from a problem XP SP2 installation. Please take the precaution of printing out the recovery instructions. Hopefully, they will never have to be used. At any rate, be prepared when priorities change and XP SP2 must be installed immediately. When rushed, looking for recovery information before installing may end up being an after-thought. Windows XP SP2 is also an issue for IT departments using SUS for updates, since it may need to be blocked from some SUS client computers and approved for others. Remember that the service pack will have to be approved in the SUS server database before clients can receive it, giving an extra layer of protection to SUS shops. If any of these scenarios applies, here are some resources. Start with the free Microsoft tool at http://snipurl.com/8gjw. It includes an executable, a script, ADM template to use with Group Policy, and sample E-mail text to be used to inform users on how to block and unblock delivery of XP SP2. Note: Refer to the following linlks for more information about blocking: http://snipurl.com/8gjx http://snipurl.com/8gjz http://snipurl.com/8ei8 For those who like to do things the hard way, the Registry can be edited to block XP SP2 delivery. Go to the following key: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate and add the new value DoNotAllowXPSP2. Set the value to 1. This will block delivery of XP SP2 via SUS or Automatic Updates for up to 120 days. Removing the value will allow delivery of XP SP2, as will the passage of time. This isn't a permanent solution; it just affords a little more breathing room. And finally, do not believe everything read or heard. Contrary to some rumors, XP SP2 does not break things; it fixes things. Sometimes closing holes means good software will need to be revised or reonfigured. Note: Most of the Microsoft URLs referenced above are very long; the "snipurl" versions do not break, and will not expire. CAUTION: Incorrectly editing the registry may severely damage the system. Before making changes to the registry, back up any valued data on the computer. * Trademark ownership information

TAUS0630917EN00

Description Cannot print or print preview a web page after installing Microsoft* Windows XP SP2. Solution CAUSE: The web page includes an ActiveX object. For security reasons the printing function is blocked. SOLUTION: The only way for an end-user to print the page is to turn off a Windows registry setting called "local machine zone lockdown". Microsoft advises against this, as it lowers security. WARNING: In Windows, system configuration information is centrally located in the registry. While this simplifies the administration of a computer or network, one incorrect edit to the registry can disable the operating system. The following list provides some best practices for using the registry and Registry Editor safely: 1. Before making changes to the registry, make a backup copy. 2. Back up the registry by using a program such as Backup. After making changes to the registry, create an Automated System Recovery (ASR) disk. For troubleshooting purposes, keep a list of the changes you make to the registry. For more information, see System State data. 3. Do not replace the Windows registry with the registry of another version of the Windows or Windows NT operating systems. 4. Use reliable tools and programs other than Registry Editor to edit the registry. 5. Incorrectly editing the registry may severely damage the system. Use tools and programs that provide safer methods for editing the registry. 6. Never leave Registry Editor running unattended. * Trademark ownership information

TAUS0630932EN00

Description Unable to print after installing Microsoft* Windows XP SP2. Solution CAUSE: The printer driver is corrupt. SOLUTION: Uninstall and then reinstall the printer driver. If that does not work, uninstall SP2, then uninstall the printer driver, reinstall SP2 and reinstall the printer driver. * Trademark ownership information

TAUS0638799EN00

Description When printing from WordPerfect* (version 10, 11 or 12) paper will not pull from the specified paper tray when selected from the print driver. Solution CAUSE: Paper tray calls must be made within the application using page setup. Tray call settings in the driver are over-ruled by page definitions established from the application. SOLUTION: Page definitions have to be created within the File menu, and selecting Page Setup. A page definition has to be created for each tray on the printer. The default page definition used in new documents is the letter definition. These definitions are printer specific and should be created in the "printer page types" section. 1. Launch WordPerfect. 2. Go to the File Menu and select Page Setup. 3. Click on the tab that reads Page Setup. 4. In the section that reads Page Definition choose Printer Page Types. 5. Click on the button that reads Add. 6. In the Name section give this definition a name. (Corel* recommend's that you identify the tray you want to print from; an example would be tray #1, tray #2 and so forth.) 7. In the Type section select the stationary tray you will print from. For example, select the letterhead type when printing on letterhead stationary; otherwise select standard paper size, when there is no option. 8. In the Size section select the appropriate stationary size. When selecting paper that is not the standard size, select User Defined Size and enter in the Height and Width below. 9. In the Source section select the tray where the stationary is located. 10. On the right-hand side of the screen in the section that reads Show Page Size for make sure that only the current printer is selected. 11. Click on OK. 12. Follow the steps outlined above once for each tray that you have. Next, to print a document from a specific tray, just go to the beginning of the document then go into page setup to select the page definition, then print. The document will now print from the appropriate tray. * Trademark ownership information

Solution ID TAUS0638864EN00 Solution Usage 0
Description "Spooler subsystem app has encountered a problem and needs to close" message following installation of the PCL* driver on a Microsoft* Windows XP workstation with a small inkjet printer connected via a parallel connection. Solution CAUSE: A third-party printer driver or a third-party service prevents adding printers, or the third-party printer driver or third-party service affects the functionality of a newly installed printer. Note: As an example, this issue may occur if the Lexmark* print service (LexBce Server service) is installed and is running on the computer before another printer is added. SOLUTION: To resolve this issue, follow these steps: 1. If the Lexmark print service is installed on your computer, turn off the LexBce Server service. To do this: a. Click Start, right-click My Computer, and then click Manage. b. Expand Services and Applications, and then click Services. c. In the right pane, right-click LexBce Server, and then click Properties. d. On the General tab, in the Startup type list, click Disabled. e. Under Service status, click Stop, and then click OK. f. Right-click the Print Spooler service, and then click Start (if it is stopped). g. Quit Computer Management. 2. Test whether the issue is resolved. If the issue is resolved, the remaining steps are not required. If the issue is not resolved, go to step 3, and then follow the remaining steps. 3. Start the computer in Safe Mode. For additional information about how to start the computer in Safe Mode, click Start, click Help and Support, type safe mode in the Search box, press the ENTER key, and then click the Start Windows in Safe Mode topic. 4. Start Microsoft Windows Explorer, then delete all the files and the folders in the following where C: is the drive that Windows XP is installed: C:\Windows\System32\Spool\Printers C:\Windows\System32\Spool\Drivers\w32x86 5. Start Registry Editor. To do this, click Start, click Run, type regedit in the Open box, and then click OK. WARNING: Incorrectly editing the registry may severely damage the system. Before making changes to the registry, back up any valued data on the computer. Konica Minolta is not responsible for any system errors that may result from using a registry editor incorrectly. 6. Locate and expand the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86 View the list of subkeys. There should only be the following subkeys: Drivers Print Processors 7. If there are any subkeys other than the subkeys that are listed in step 6, follow these steps: a. On the File menu, click Export. b. In the File Name box, type a descriptive name for this key, and then click Save - for example, type WindowsNTx86regkey. Use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86 registry key to restore the key if any problems occur after completing this procedure. c. Delete all the subkeys other than the subkeys that are listed in step 6. To do this, right-click each subkey that is not on the list, and then click Delete. Click Yes when prompted to confirm the deletion. 8. Locate and then expand the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers The registry entries for the printer drivers that are installed on the computer are stored in the Version-x subkey or subkeys, where x is a number (typically 2 or 3). 9. Expand the Version-x subkey or subkeys, and then delete the printer driver entries. To do this, right-click each printer driver subkey, and then click Delete. Click Yes when prompted to confirm the deletion. 10. Locate and then expand the following registry key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors View the list of subkeys. There should only be the following subkeys for the default print monitors: BJ Language Monitor Local Port PJL Language Monitor Standard TCP/IP Port USB Monitor 11. If there are any subkeys other than the subkeys that are listed in step 10, follow these steps: a. On the File menu, click Export. b. In the File Name box, type a descriptive name for this key - for example, type MonitorsRegkey, and then click Save. Use this backup of the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors registry key to restore the key iif any problems occur after completing this procedure. c. Delete all the subkeys other than the subkeys that are listed in step 10. 11. To do this, right-click each subkey that is not on the list, and then click Delete. Click Yes when prompted to confirm the deletion. 12. If a local printer is attached, disconnect the printer cable from the computer and then restart the computer. 13. Verify that the Print Spooler service is running. To do this, follow these steps: a. Click Start, right-click My Computer, and then click Manage. b. Expand Services and Applications, and then click Services. c. In the right pane, right-click the Print Spooler service, and then click Start (if it is stopped). d. Quit Computer Management. 14. Reconnect the printer cable to the computer, add the printer and try to print a test page. To add the printer, follow these steps: a. Click Start, and then click Printers and Faxes.

b. Click Add a printer. The Add Printer Wizard starts. c. Follow the instructions in the Add Printer Wizard to install the printer. Notes: -- For additional information about how to manually remove printer drivers, refer to article number 135406 in the Microsoft Knowledge Base. -- For additional information about how to troubleshoot printing problems in Windows XP, refer to article numbers 314085 and 308028 in the Microsoft Knowledge Base. -- If unfamiliar with the registry or registry editor, refer to [[Windows registry tips and guidelines|URL http://techweb.konicabt.com/tpm/media/registry_guide.pdf]] for additional information. -- To view the above PDFs, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]] * Trademark ownership information

TAUS0638956EN00

Description Unable to access All Active Solutions on NSSG Web Support. Solution CAUSE: Certain end user permissions are in place to prevent unauthorized access. Unfortunately, some technicians are also 'locked out'. SOLUTION: Here is the [[All Active Solutions for the IP711| URL http://techweb.konicabt.com/WebSolution/ip711.pdf]] document. Note: To view the above PDF, Acrobat* Reader must be installed. Acrobat Reader can be downloaded for free from the Adobe* Web site at: [[http://www.adobe.com/products/acrobat/readstep2.html| URL http://www.adobe.com/products/acrobat/readstep2.html]] * Trademark ownership information

TAUS0639787EN00

Description Does this controller support the WATERMARK feature? Solution This can be set up from the SETUP tab on the print controller by performing the following: 1. Right click on the IP711 printer controller driver. 2. Select PROPERTIES. 3. Select PRINTING PREFERENCES. 4. Enter the desired Watermark on the SETUP tab.

TAUS0641415EN00

Description In PageMaker for Macintosh 9 the finishing options are not accessible. Solution PageMaker does use the installed PPD for obtaining printer options. The options must be installed in PageMaker also. Use the Following procedure: Launch PageMaker, Select File ' Print ' features Scroll all the way to the bottom and select the printer options there. The finishing features will be available.

TAUS0642132EN00

Description Scrambled characters when printing from Adobe* Acrobat* using the PCL* driver. Solution CAUSE: The fonts used in the document are not resident on the local PC.
SOLUTION: When printing in Adobe* Acrobat*, click on Advanced button in print properties, then choose "Print as Image". * Trademark ownership information

TAUS0642355EN00

Description Mail Merge staples all pages together, but end user would like to separate mail merge into separate jobs based by name or address. Solution Download and import [[word_mail_merge_printing|URL http://techweb.konicabt.com/tpm/media/word_mail_merge_printing.pdf]] into normal.dot. Set up the driver you want to use as the default and then set the finishing features desired in Printing Preferences. Run normal.dot under macros, you should be presented with a question of how many sections are in the merge (i.e., how many pages before the next name or address in the merge).

TAUS0643943EN00

Description The printer will not 'wake up' out of power save mode after replacing or upgrading controller. Solution CAUSE: Incorrect installation procedure. SOLUTION: When replacing or upgrading the controller, remove the DIMM from the f-board.

TAUS0644113EN00

Description Are Macintosh* OS 10.4 drivers available or can OS 10.2/10.3 drivers be used on OS 10.4 Tiger? Solution Macintosh OS 10.4 Tiger currently ships with print drivers from EFI. It is recommended to use these drivers, rather than non-certified drivers that may ship with the controller. It is not recommended to use OS 10.2 or 10.3 drivers in 10.4, unless there are no alternatives. The native OS 10.4 drivers are only for use with EFI Fiery* controllers and are not intended for use with legacy Konica controllers. The following is a list of EFI drivers that ship with OS 10.4. EFI Fiery S300 31C-M PS v1.0 EFI Fiery S300 31C-M PS v1.0 eu EFI Fiery S300 31C-M PS v2.0 EFI Fiery S300 31C-M PS v2.0 eu EFI Fiery S300 50C-K v1.1 EFI Fiery S300 50C-K v1.1 eu EFI Fiery S300 50C-K v1.1 jp EFI Fiery X3 55BW-M PS v2.0 EFI Fiery X3 55BW-M PS v2.0eu EFI Fiery X3 65BW-M Pro v1.0 EFI Fiery X3 65BW-M Pro v1.0 eu EFI Fiery X3 75BW-M PS v2.0 EFI Fiery X3 75BW-M PS v2.0 eu EFI Fiery X3e 08C-M jp EFI Fiery X3e 08C-M v3011.103 EFI Fiery X3e 20C-M v1.0 jp EFI Fiery X3e 20C-M v2.0 EFI Fiery X3e 20C-M v2.0 eu EFI Fiery X3e 22C-KM PS jp EFI Fiery X3e 22C-KM PS v2.0 EFI Fiery X3e 22C-KM PS v2.0 eu EFI Fiery X3e 31C-M PS v1.0 EFI Fiery X3e 31C-M PS v1.0 eu EFI Fiery X3e 31C-M PS v1.0 jp EFI Fiery X3e 31C-M PS v1.1 EFI Fiery X3e 31C-M PS v1.1 eu EFI Fiery X3e 31C-M PS v1.2 EFI Fiery X3e 31C-M PS v1.2 eu EFI Fiery X3e 31C-M PS v2.0 EFI Fiery X3e 31C-M PS v2.0 eu EFI Fiery X3e 50C-K v1.0
EFI Fiery X3e 50C-K v1.0 eu EFI Fiery X3e 50C-K v1.0 jp EFI Fiery X3e 65BW-M EFI Fiery X3e 65BW-M eu EFI Fiery X3e 7255BW-KM EFI Fiery X3e 7255BW-KM eu EFI Fiery X5 85BW-M v1.0 EFI Fiery X5 85BW-M v1.0 eu EFI Fiery Z4 08C-M jp EFI Fiery Z4 08C-M v3010.104 EFI Fiery Z4 20C-M v1.01 EFI Fiery Z4 20C-M v1.01 eu EFI Fiery Z5 08C-M v3011.103 EFI Fiery Z5 20C-M v1.02 EFI Fiery Z5 20C-M v1.02 EFI Pi5500 * Trademark ownership information

TAUS0646880EN00

Description Does Konica Minolta provide support for Equitrac* products? Solution For Equitrac technical support information please visit [[http://www.metrics.com/Support/| URL http://www.metrics.com/Support/]] or contact trained Support Engineers by telephone at 519.885.2458, by fax at 519.746.7931 or via E-mail at support@metrics.com Note: Technical Support is available Monday through Friday, 8 AM to 6 PM, EST. *[[Trademark ownership information| FILE V:\\TEXT\\TRADEMRK.TXT NEW]]

TAUS0646920EN00

Description Following a Novell* NDPS or iPrint installation, the Windows* print driver is configured with default settings ONLY on the client workstation. Solution CAUSE: Novell NDPS or iPrint drivers are migrated from the Novell server to clients in a non-configured format. This is because the driver is not actually installed on the Novell server. In the Novell environment, the server simply holds, and then pushes the non-configured driver files to the client. In a Windows server environment, the Windows driver is installed on the server and can be configured prior to roll out to the clients. SOLUTION: It is possible to roll-out configured drivers from in a Novell environment. Novell's ZenWorks* allows the Novell administrator to create a snapshot of a client workstation before and after the driver is installed and configured. This snapshot can then be migrated to the user's workstations resulting in a configured driver installation. Using ZenWorks to migrate a configured driver will vary based on Netware version, ZenWorks version, NDPS version and Windows client version. Therefore step by step instructions to perform this operation are not available. The Novell administrator at the location would be responsible for implementing this procedure. [[Third party print driver configuration applications| URL http://www.printerpropertiespro.com]] for Novell are also available. Please consult the vendor(s) for implementing these solutions. * Trademark ownership information

TAUS0648613EN00

Description How to ping in a Macintosh*. Solution To ping a Macintosh* perform the following: 1. Double click the Finder. 2. Select Applications.
3. Select Utilities. 4. Select Terminal. 5. From the Terminal window type the standard ping command. * Trademark ownership information

TAUS0651091EN00

Description Maximum number of users allowed to be logged into Command WorkStation* concurrently. Solution The maximum number of users is 4. Exceed the maximum, and there is the possibility that Command WorkStation will not automatically update each client. * Trademark ownership information

TAUS0651146EN00

Description What is the default controller peripheral setting for the IP711? Solution The default Controller Peripheral Setting for the IP711 is 0. This can be set in Tech Rep Service Mode under the System Input, Peripheral Setting.

TAUS0653463EN00

Description How to disable the print notification message when printing from Microsoft* Windows XP. Solution To disable the print notification message when printing from Microsoft* Windows XP perform the following: 1. Click the Start menu. 2. Select Printers and Faxes. 3. Click the File menu. 4. Select Server Properties. 5. Click the Advanced tab. 6. Uncheck the Show informational notifications for local printers check box. 7. Uncheck Show informational notifications for network printers check box. 8. Uncheck Notify when remote documents are printed check box. 9. Click Apply. 10. Click OK. * Trademark ownership information

TAUS0655694EN00

Description Are Konica Minolta MFP's comaptable with Category 6 cable standard? Solution Konica Minolta MFP's are fully comaptable with Category 6 cable standard. Category 6 cable is a cable standard for Gigabit Ethernet and other network protocols that is backward compatible with the Category 5/5e and Category 3 cable standards. Cat-6 features more stringent specifications for crosstalk and system noise. The cable standard is suitable for 10BASE-T / 100BASE-TX and 1000BASE-T (Gigabit Ethernet) connections. It provides performance of up to 250 MHz.

TAUS0656768EN01

Description What Konica Minolta print drivers will come bundled with Windows Vista?
Solution The following list of drivers were included in a recent Vista release candidate and should be representative of what is included in the final retail product. These include a large number of legacy Konica, Minolta and Konica Minolta drivers. Unless otherwise noted, the majority of the drivers are Postscript Konica 7020/IP-421 7022/IP-422 7022/IP-423 7025/IP-421 7030/IP-421 7033/IP-402 7033/IP-411 7035/IP-421 7040/IP-402 7040/IP-411 7045/IP-431 7050/IP-201 7050/IP-301 7050/IP-302 7055/IP-303 7055/IP-304 7060/IP-302 7060/IP-304 7065/IP-303 7065/IP-304 7075/IP-601 7085/IP-602 7130/IP-422 7130/IP-423 7135/IP-423 7145/IP-423 7150/IP-302 7150/IP-304 7155/IP-511 7165/IP-511 Force 50/IP-301 Force 50/IP-302 Force 60/IP-302 Force 60/IP-304 Force 65/IP-511 Force 75/IP-601 Force 85/IP-602 KL-3015 Konica Minolta KM 1050 KM 350/250/200 KM 500/420 KM 7085/IP-602 KM 7145/IP-432 KM 7222/IP-424 KM 7228/IP-424 KM 7235/IP-424 KM 7255/IP-511A KM 7272/IP-511A KM 750/600 KM 920 KM C250 KM C351 KM C352/C300 KM C450 KM Di2010 PCL5e KM Di2010f PCL5e KM Di2510 PCL5e KM Di2510f PCL5e KM Di3010 PCL5e KM Di3010f PCL5e KM Di470 PCL5e KM Di552 PCL5e KM Pi7200E PCL5e KM mc2450 PPD
KM mc5450 PPD KM mc7450 PPD Magicolor 2350 Magicolor 3300 PPD Magicolor 7300 PPD PagePro 9100 PPD Minolta Minolta Di2010 PCL5e Minolta Di2010f PCL5e Minolta Di2510 PCL5e Minolta Di2510f PCL5e Minolta Di3010 PCL5e Minolta Di3010F PCL5e Minolta Di3510 PCL5e Minolta Di3510f PCL5e Minolta Di470 PCL5e Minolta Di552 PCL5e Minolta Pi1802/1502e PCL5e Minolta Pi3500 Minolta Pi3502 PCL5e (MS) Minolta Pi5500 (MS) Minolta Pi5501 PCL5e (MS) Minolta Pi6200 Minolta Pi6500e PCL5e Minolta Pi6500 Pro PCL5e (MS) Minolta Pi7200e PCL5e Minolta Pi7500Ver2 PCL5e (MS) Minolta Pi8500Pro PCL5e