The installer for the printer driver starts up.
Check the details of the license agreement, and then click Continue.
Click Agree in the confirmation dialog box if you agree to the terms of the license.

Installation starts.

After the installation has been completed, click Close.
This completes the installation of the magicolor 2530 DL printer driver.
Printer Setup Utility Settings
When Using a USB Connection
Use a USB cable to connect the printer to your computer. Open Printer Setup Utility, which can be accessed by clicking Macintosh HD, then Applications, then Utilities. In the Printer List, click Add.
The detected printer appears in the Printer Browser.
Select mc2530DL in the Printer Name.
If mc2530DL does not appear, check that the printer is turned on and the USB cable is connected, and then restart the computer. Check that KONICA MINOLTA magicolor 2530 DL is selected in the Print Using list. Click Add. Select Optional Trays and Duplex Option pop-up menu to match your printer setup, and then click Continue.
The new printer appears in the Printer List screen.
When Using a Network Connection
The network connection settings can be specified in one of several ways: AppleTalk setting, IP printing setting (IPP, LPD or Socket).

AppleTalk Setting

Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. In the Printer List, click Add.
Select magicolor 2530 in the Printer Browser.
Check that KONICA MINOLTA magicolor 2530 DL is selected in the Print Using list. Click Add.
Select Optional Trays and Duplex Option pop-up menu to match your printer setup, and then click Continue.

IP Printing Setting

Connect the printer to an Ethernet network. Open Printer Setup Utility, which can be accessed by clicking Startup Disk, then Applications, then Utilities. Click Add in the Printer List.

Click IP Printer.

Select desired print protocol from the Protocol pop-up menu.
-For an IPP setup, select Internet Printing Protocol - IPP. -For an LPD setup, select Line Printer Daemon - LPD. -For a port 9100 setup, select HP Jet Direct - Socket.
Enter the IP address for the printer in the Address text box.
For an LPD setup, type "lp" in the Queue text box. For an IPP setup, type "ipp" in the Queue text box. Check that KONICA MINOLTA magicolor 2530 DL is selected in the Print Using list. Click Add.

Select the Optional Trays and Duplex Option pop-up menu to match your printer setup, and then click Continue.
Selecting Print Options 1 Open Printer Setup Utility, which can be accessed by clicking Macintosh 2
HD, then Applications, then Utilities. Select this printer in the Printer List, and then select Show Info from the Printers menu.
Select Installable Options from the pop-up menu.

Selecting Print Options

Select the Optional Trays and Duplex Option pop-up menu to match your printer setup, and then click Apply Changes.
Close the Printer Info dialog box.
Uninstalling the Printer Driver 1 Insert the magicolor 2530 DL Utilities & Documentation CD-ROM in the 2
CD-R/DVD drive of your Macintosh. Double-click the CD icon on the desktop, drivers folder, mac OSX folder, and then double-click the magicolor2530DL-x.x.x-ppc-i386.dmg disk image file. The disk image KONICA MINOLTA magicolor 2530 DL appears on the desktop. Double-click the magicolor 2530 DL Uninstaller file in the disk image.
The uninstaller for the printer driver starts up and the following message appears.

Click Remove.

Uninstalling the Printer Driver
Enter the administrator user name and password in the Authenticate dialog box, and then click OK.
After the uninstallation has been completed, click Close.
This completes the uninstallation of the magicolor 2530 DL printer driver.
Specifying Page Setup Settings
The following dialog box appears when Page Setup. is selected from the File menu in the application being used.
Select Page Setup. from the File menu. The Page Setup dialog box appears. Select this printer in the Format for pop-up menu.
You can select the following sections from the Settings pop-up menu. Section Page Attributes Save As Default Description This is used to specify the settings for the paper size, scaling, and print orientation. This is used to save the new settings as the defaults.

Page Attributes Options

The Page Attributes section is used to specify the settings for the paper size, scaling, and print orientation.
Paper Size Select the desired paper size from the Paper Size pop-up menu. Orientation Select either a vertical or horizontal page orientation for printouts. Scale If you want to enlarge or reduce the size of the printout, enter the scale ratio here (1-400%). Regardless of which paper size is selected, the printer does not print within 0.157" (4 mm) of the edge of the paper.

ColorSync

Color Conversion Allows you to select host-based color matching or printer-based color matching. Quartz Filter Allows you to select Quartz Filter.

Cover Page

Print Cover Page Allows you to set cover page before or after document. Cover Page Type Allows you to select cover page type. Billing Info Allows you to set billing information printed on cover page.

Paper Feed

The Paper Feed section is used to specify the paper feed setting.
All pages from All pages in the document are printed using the paper in the specified paper tray. First page from The first page of the document is printed on paper from a paper tray different from the tray used to print the rest of the document. Remaining from The rest of the document is printed from the specified paper tray when the first page is to be printed on paper from a different tray. If an optional tray is installed, select Tray 2 under Installable Options (p. 22). If Tray 2 is not selected, Tray 2 appear in gray and cannot be selected.

Printer Features

The Printer Features section is used to specify the resolution, paper type, color options, watermark options etc., for the Basic Features, Color Matching Options, Image Options, Watermark Selection, Watermark Orientation, and Watermark Setting feature sets.

Basic Features

Resolution This option specifies the resolution to be used when printing a document. Line Art Select this check box to print more detailed images. Media Type This option specifies the type of paper on which the print image will be printed. Color Mode This option specifies whether the document should be printed in color (Color Matching On / Color Matching Off) or grayscale. Transmit Once Select this check box to print a single copy first before printing multiple copies. Since the data for copies starting with the second one is processed by the printer, printing can be performed in a short period of time. This feature can be used only with Mac OS X v10.4. With Mac OS X v10.3, this check box appears; however, even if the check box is selected, the feature is not used.

Color Matching Options

Rendering Intent This option specifies the color matching settings. Perceptual: Performs suitable color matching for photographic images. Saturation: Colorimetric: Performs suitable color matching for business graphics. Performs most accurate hue color match, but the printer may replace hues it cannot reproduce.

Image Options

Rotate Image 180 degrees Select this check box to print the image rotated 180 degrees. Shift Image Select this check box to print the image shifted in the X and Y directions. X: Select the distance to shift the image in the X direction. Y: Select the distance to shift the image in the Y direction.

Applications Connecting the computer and printer RAM Network
As an example, the descriptions of the operations for Red Hat 9.0 are provided in this chapter.
Setting Up the Printing System
This section describes the installation procedure under Red Hat Linux 8.0. This procedure is not required for installation under Red Hat Linux 9.0. From the Main Menu, click Extras, point to System Settings, and then click Printer System Switcher. If Red Hat Switch Printer is not installed on your computer, please install it. Select CUPS, and then click OK.

Click OK.

From the Main Menu, select System Tools, then Terminal. Enter the following command /etc/init.d/cups restart. (It requires root privilege.)
Before proceeding with the installation, be sure to exit all running applications.
Installing the Software from the Desktop
Copy the printer driver package from the CD-ROM to the desktop. Double-click the printer driver package (on the desktop). Root privileges are required in order to install the driver. Click Continue.
Installing the Software from the Command Line
Copy the printer driver package from the CD-ROM to the desired folder on the computer. From the Main Menu, select System Tools, then Terminal. Enter the command rpm -Uvh magicolor2530DL-x.x.x-x.i386.rpm. x.x.x-x represents the version number of the printer driver.

Quit Terminal.

Adding the Printer
Adding the Printer from a Web Browser
Start up the Web browser. Enter the URL http://localhost:631, and then click Manage Printers. The CUPS Administration Web page appears.
Click Add Printer. A pop-up window appears.
Enter the user name and password for using root privileges, and then click OK. Enter the printer name, location, and description, and then click Continue.
Select a Device Port from the Device list, and then click Continue. TCP/IP: AppSocket/HP Jet-Direct USB: USB Printer #1 (KONICA MINOLTA mc2530DL)
For a USB or parallel connection, skip to step 8. Enter the device URI in the following form: socket:// <Printer IP or Printer Hostname>[:port]. Example: Using Printer IP - socket:// 192.168.1.190:9100 Using printer Hostname - socket://Hostname:9100 Hostname may be substituted by IP Address, and Port is optional. Click Continue. Select KONICA MINOLTA, click Continue.

Select KONICA MINOLTA magicolor 2530 DL (en), then click Continue.
The following message appears.
Adding the Printer From the Command Line
From the Main Menu, select System Tools, then Terminal. Enter the command /usr/sbin/lpadmin -p [printer name] -E -v [device] -m ppd. Example /usr/sbin/lpadmin -p km2530dl -E -v socket://192.168.1.20 -m KONICA_MINOLTA/km2530dl_en.ppd.gz
Uninstalling the Printer Driver 1 From the Main Menu, select System Tools, then Terminal. 2
Root privileges are required in order to uninstall the driver. Enter the command rpm -e magicolor2530DL.
Specifying Printer Driver Settings
Displaying the Settings Page
Start up the Web browser. Enter the URL http://localhost:631, and then click Manage Printers. Printer on localhost.localdomain window appears.
Click Configure Printer. The printer driver settings page appears.

Printer Driver Settings

Parameters Collate Settings If On is selected, your print job is collated (one complete copy of the document is printed before the next copy is printed). The default setting is On. Color Mode Specifies the color mode to be used when printing. Color Matching On: Prints after the printer driver converts the colors to match the tones in the computer screen. Color Matching Off: Prints without the printer driver converting the colors. Grayscale: Prints in grayscale. The default setting is Color Matching On. Media Type Specifies the media type as Envelope, Glossy, Labels, Letterhead, Plain Paper, Postcard, Recycled Paper, Thick Stock, or Transparency. The default setting is Plain Paper. Resolution Specifies the resolution as 600600 DPI, 1200600 DPI, or 2400600 DPI. The default setting is 1200600 DPI. Transmit Once If On is selected, a single copy is printed first before printing multiple copies. Since the data for copies starting with the second one is processed by the printer, printing can be performed in a short period of time. The default setting is On.
Parameters Rendering Intent Settings Specifies the color matching settings. Perceptual: Performs suitable color matching for photographic images. Saturation: Performs suitable color matching for business graphics. The default setting is Saturation.

General

Parameters Duplex Printing Settings Specifies the duplex print binding position as Long Side, None, or Short Side. The default setting is None. Paper Size Paper Source Specifies the paper size. An irregular paper size cannot be selected. Specifies the paper source as Auto, Printer Auto Select, Tray 1 (Multipurpose), Tray 2. The default setting is Printer Auto Select. Tray 2 is only available if the setting is being specified from the Administration Web page.

Options Installed

Parameters Duplex Option Settings Select Installed if the optional duplexing unit for the printer has been installed. The default setting is Not Installed. Optional Trays Select Tray 2 if the optional trays for the printer has been installed. The default setting is Not Installed.
Parameters Watermark Orientation Settings Specifies the orientation of the watermark as Landscape or Portrait. The default setting is Portrait.
Parameters Watermark-Overlay Settings Specifies the watermark function as None, Overlay, or Watermark. The default setting is None.
Parameters Watermark Color Settings Specifies the color for the text in the watermark as Black, Blue, Cyan, Green, Magenta or Red. The default setting is Black. Watermark Font Specifies the font to be used for the text in the watermark as Bookman Light, Courier, Helvetica, or Times Roman. The default setting is Bookman Light. Watermark Intensity Specifies the density for the watermark between 1 and 7. The default setting is 4. Watermark Size Specifies the fonts size for the text in the watermark as 24, 30, 36, 42, 48, 54, 60, 66, 72, 78, 84, or 90 point. The default setting is 48 point. Watermark Text Specifies the text for the watermark as CONFIDENTIAL, COPY, DO NOT COPY, DRAFT, FINAL, PROOF, or TOP SECRET. The default setting is CONFIDENTIAL.

Banners

Parameters Starting Banner Settings Specifies the starting banner as none, classified, confidential, secret, standard, topsecret, or unclassified. The default setting is none. Ending Banner Specifies the ending banner as none, classified, confidential, secret, standard, topsecret, or unclassified. The default setting is none.
The following dialog box appears when Page Setup. or Print is selected from the File menu in the application being used. The contents and available options that appear in the print dialog box may vary depending on the application being used.

KDE Print Dialog Box

With KDE applications, the KDE print dialog box appears.
Displaying the Print Settings Dialog Box
Click Properties in the print dialog box.
The magicolor 2530 DL settings dialog box appears.
If necessary, specify any of the various settings, and then click OK. The Print dialog box appears again.

Print Settings

Parameters Color Matching Options
Settings Rendering Intent Specifies the color matching settings. Perceptual: Performs suitable color matching for photographic images. Saturation: Performs suitable color matching for business graphics. The default setting is Saturation.

Duplex Printing***

Specifies the duplex print binding position as Long side, None, or Short side. The default setting is None. Specifies the paper size. An irregular paper size cannot be selected. Existing settings for the application take priority.

Paper Size*

Paper Source** Specifies the paper source as Auto, Printer Auto Select ,Tray 1 (Multipurpose), or Tray 2. The default setting is Printer Auto Select. Installable Options Duplex Option Optional Trays The setting for this parameter cannot be specified. Specify the setting for this parameter from the CUPS Administration Web page. Watermark Orientation Watermark Selection Watermark Orientation WatermarkOverlay Specifies the orientation of the watermark to Landscape or Portrait. The default setting is Portrait. Specifies the watermark function as None, Overlay, or Watermark. The default setting is None.
Parameters Watermark Setting Watermark Color
Settings Specifies the color for the watermark as Black, Blue, Cyan, Green, Magenta, or Red. The default setting is Black. Watermark Font Specifies the font for the text in the watermark as Bookman Light, Courier, Helvetica, or Times Roman. The default setting is Bookman Light. Watermark Intensity Specifies the density for the watermark between 1 and 7. The default setting is 4.
Watermark Size Specifies the font size for the text in the watermark as 24, 30, 36, 42, 48, 54, 60, 66, 72, 78, 84, or 90 point. The default setting is 48 point. Watermark Text Specifies the text for the watermark as CONFIDENTIAL, COPY, DO NOT COPY, DRAFT, FINAL, PROOF, or TOP SECRET. The default setting is CONFIDENTIAL.
With applications other than KDE applications and OpenOffice, the following print dialog box appears.
Click Properties in the Print dialog box.
The Print Properties dialog box appears.
Enter the command kprinter --stdin, and then click OK. The Print dialog box appears again. Click Print in the Print dialog box. The kprinter Print dialog appears.
Click Properties. in the kprinter Print dialog box.
Click OK to print the document. For details on each of the settings, refer to page 65.
Tab General Description This tab contains options for the paper size, media type, paper source, page orientation, duplex print, banner and layout options. This tab is not used by this printer driver. This tab is not used by this printer driver. This tab is not used by this printer driver. This tab contains options for the driver settings. This tab is not available with this printer driver.

Printing does not continue with a custom paper size.
Understanding the Network Configuration Menus

Network Menu

Location within the Configuration Menu
MENU SPECIAL PAGES MENU LANGUAGE MENU ENGINE MENU NETWORK DHCP:xx BOOTP:xx IP ADDRESS xxx.xxx.xxx.xxx SUBNET MASK xxx.xxx.xxx.xxx GATEWAY xxx.xxx.xxx.xxx MAC ADDRESS 00206Bxxxxxx HTTP:xx

SNMP:xx

FORCED MODES xx/xx/xx MENU CONSUMABLE USAGE MENU DIRECT PRINT
Accessing the Network Menu
Use the following series of keystrokes at the printer to access the Network menu options on your printer. This menu provides access to all of the configurable network items. Press this key. (until) the message window reads. READY SPECIAL PAGES

MENU NETWORK

Using the Network Menu Options
If the printer is connected to a network, the following settings should be specified. For details about each setting, contact your network administrator. When manually setting the IP address, Subnet Mask, and Gateway turn off DHCP and BOOTP first.

DHCP/BOOTP

Purpose If there is a DHCP or BOOTP server on the network, specifies whether the IP address is automatically assigned by the DHCP or BOOTP server and other network information is loaded. DHCP SET: ON BOOTP SET: OFF DHCP SET: OFF BOOTP SET: ON DHCP SET: OFF BOOTP SET: OFF Default DHCP SET: ON, BOOTP SET: OFF

Options

IP Address
Purpose Range Sets the IP address of this printer on the network. 0255 for each xxx triplet Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to move between triplets. Default Notes 192.168.1.2 Leading zeros of each triplet are automatically suppressed; for example, 001 displays as 1

Subnet Mask

Purpose Sets the subnet mask value of the network. The subnet mask allows you to limit access to your printer (for example, according to departmental divisions). 0255 for each xxx triplet Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to move between triplets. Default Notes 255.255.255.0 Leading zeros of each triplet are automatically suppressed; for example, 000 displays as 0

Gateway

Purpose Sets the address of the router/gateway if a router/gateway is used on your network and you allow users outside your network environment to print on your printer. 0255 for each xxx triplet Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to move between triplets. Default Notes 192.168.1.1 Leading zeros of each triplet are automatically suppressed; for example, 001 displays as 1

Choose Have Disk, locate the directory on the CD-ROM where the printer driver files are located (for example, drivers\english\W2k-xp), and then choose OK.
Using PageScope Web Connection
About PageScope Web Connection
This chapter provides information on PageScope Web Connection, an HTTP (HyperText Transfer Protocol)-based web page that resides in your printer and that you can access using your Web browser. This page gives you instant access to printer status and the most frequently used printer configuration options. Anyone on your network can access the printer using their web browser software. In addition, with the proper password, you can change the configuration of the printer without leaving your PC. Users who are not given passwords by the administrator can still view the configuration settings and options but are not able to save or apply changes.

Display Language

The language used in the PageScope Web Connection screens is specified from the printers control panel. For details on specifying the display language, refer to the Users Guide (CD-ROM) provided with the printer.

Requirements

To use PageScope Web Connection, the following is required: Windows Server 2003/XP/2000/Me/98SE/NT4.0, Mac OS X, Linux Microsoft Internet Explorer version 5.5 or later Netscape Navigator version 7.1 or later Safari version 1.0 or later You do not need an Internet connection. TCP/IP communication software (used by PageScope Web Connection) installed on your PC A network, to which both your PC and the printer are connected You cannot access PageScope Web Connection using a local (USB) connection. If your PC and printer are connected via a USB cable, use the Status Display.
Setting Up the Printer Web Page
Setting up the printer web page to run on your network involves two basic steps: Determining the name or address of your printer Setting up the no proxy preferences in your browser software
Determining the Printer Name
The printer web page can be accessed in two ways: The printer names can also be determined via WINS if the network supports it. Through the assigned name of the printerThis name comes from the IP host table (the filename is hosts) on the computer system and is usually assigned by the system administrator (for example, magicolor 2530 DL). It may be more convenient for you to use the printer name than the IP address. Location of the Host Table on the PC Windows Server 2003/XP Windows Me/98SE Windows 2000/NT4.0 \windows\system32\drivers\etc\hosts \windows\hosts \winnt\system32\drivers\etc\hosts
Through the printers IP addressThe IP address of your printer is a unique number and, therefore, may be the preferred identification to enter, especially if you have more printers active in your network. The printers IP address is listed on the configuration page. Location of the Configuration Page in the Printers Configuration Menu

SPECIAL PAGES - PRINT CONFIG PAGE menu
Setting Up Your Browser Software
Since your printer resides on your intranet and is not accessible beyond the firewall of your network, you must set up the proper preferences in your browser software. Your printer name or IP address must be added to the no proxy list in the preferences dialog box of the browser. You need to do this procedure only once. The sample screens below may be different from yours depending on software versions and operating systems in use.
Our examples represent the IP address of the printer with: xxx.xxx.xxx.xxx. Always enter your printer's IP address without leading zeros. For example, 192.168.001.002 should be entered as 192.168.1.2.
Internet Explorer (version 6.0 for Windows)
Start Internet Explorer. From the Tools menu choose Internet Options. Select the Connections tab on the dialog box. Choose the LAN Settings button to display the Local Area Network (LAN) Settings dialog box. Select Advanced in Proxy server to open the Proxy Settings dialog box. In the Exceptions text box, type a comma after the last entry and then type the printer name or the IP address of your printer. Choose OK three times to return to the main browser window. Enter the printers IP address in the URL Address box to access the printer home page.
Netscape Navigator (version 7.1)
Start Netscape Navigator. From the Edit menu choose Preferences. Select the Advanced/Proxies directory from the left pane of the dialog box. Select the Manual Proxy Configuration radio button. In the No Proxy for: text box, type a comma after the last entry, and then type the printer name or the IP address of your printer. Choose OK to return to the main browser window. Enter the printer name or IP address in the URL Location box to access the printer home page.

http://192.168.1.2/

Safari (version 1.2)
From the Apple menu, choose Location, and then click Network preferences. Click Configure in the Network preferences dialog box. Click the Proxies tab. In the Bypass proxy settings for these Hosts & Domains list, type in the name or IP address of the printer. Click Apply Now. In the URL address bar, type in the name or IP address of the printer to access the printers Web page.
Understanding the PageScope Web Connection Window
The illustration below identifies the navigation and configuration areas of the windows that you see in PageScope Web Connection windows. Link to KONICA MINOLTA web site Version Access to Administrator Current status Links to main Printer name

Links to

Configuration area

Navigation

Selecting the main topic and subtopic displays the configuration area for the printer options (parameters) associated with your selections. To change a current setting, click on the current setting and then select from the available choices or enter the new value. In order to apply or save any changes made to the configuration settings, PageScope Web Connection must be logged in from Administrator Mode. (For details, refer to Administrator Mode on page 105.)

Online Assistance

The System - Online Assistance window provides the following information: Item Contact Name Contact Information Product Help URL Corporate URL Supplies and Accessories Online Help URL Description Identifies the organization that provides assistance with the printer. Identifies the web address for assistance. Identifies the web address for assistance. Identifies the KONICA MINOLTA web address. Identifies the web address where you can order printer supplies and accessories. Identifies the Web address for online assistance.

Job Page

This page allows you to view the status of current print jobs.

Active Job (shown above)

The Job - Active Job window provides the following information for up to ten print jobs: Item Job ID Description Displays the print job identification number. Each print job that the printer receives is assigned a unique identification number. If known, displays the owner of the print job. Displays the current status of the print job (Printing, Receiving, Waiting, or Cancelling). Displays the type of print job (Normal Print or IPP Print). For more information on IPP (Internet Printing Protocol), see chapter 4, Network Printing in a Windows Environment. Displays the name of the print job. Displays the number of pages in the print job. Displays the number of copies of the print job requested.
Job Owner Status Job Type
Job Name Number of Pages Number of Copies

Item Next > button

Description If more than five print jobs are queued to print, moves you from the first to the second Active Jobs window. If more than five print jobs are queued to print, moves you from the second to the first Active Jobs window. Deletes the print job(s) whose check boxes in column 1 are checked.

< Previous button

Delete Selected Job button

Print Page

This page allows you to print pages that provide various information about the printer.

Test Print (shown above)

The Print - Test Print window provides the following information: Item Configuration Page Description Allows you to print a printer configuration page, which lists the printers configuration settings, by choosing Yes, and then clicking Print button. Allows you to print a printer test page by choosing Yes, and then clicking Print button. Allows you to print a printer menu map, which displays the printers configuration menus, by choosing Yes, and then clicking Print button. Sends the page to the printer.

If you forget the new password youve assigned, use the printers
ENGINE - ENGINE SERVICE - RESTORE USER DEFAULT
menu to reset the password (and all other configuration choices) to administrator.

Preference

The System - Preference window allows you to configure the following items: Item Refresh Rate Description Sets the time interval (in seconds) that passes before the screen automatically updates. During a screen refresh, the printer is polled for any new information or status, and all of the fields in the PageScope Web Connection windows are updated. Range: Default: 307200 (0.512 minutes) 30
If less than 30 seconds is specified, the setting changes to 30 seconds. If more than 7200 seconds is specified, the setting changes to 7200 seconds. Energy Saver Sets whether or not to use the Energy Saver feature specified in the System/User Choice window. Choices: On, Off Default: On Configuration Menu Equivalent:
ENGINE - ENGINE SERVICE - ENERGY SAVER
This option is available only on models for North America. Apply button Applies the configuration settings for this window.
Item Clear button Logout button
Description Resets all configuration settings for this window to their user defaults. Logs out of Administrator Mode and returns to User Mode.
The System - Online Assistance window allows you to configure the following items: Item Contact Name Description Sets the name of the person or organization responsible for providing assistance with the printer. Range: Up to 63 characters Default: KONICA MINOLTA Customer Support Contact Information Product Help URL Corporate URL Sets the telephone number for printer assistance. Range: Up to 127 characters Default: http://printer.konicaminolta.com/ Sets the help web site address for printer assistance. Range: Up to 127 characters Default: http://printer.konicaminolta.com/ Sets the KONICA MINOLTA corporate web site address. Range: Up to 127 characters Default: http://printer.konicaminolta.com/
Item Supplies and Accessories
Description Sets the web address where you can purchase printer supplies and accessories. Range: Up to 127 characters Default: http://www.q-shop.com
Online Help URL Sets the Web address for on-line assistance. Range: Up to 127 characters Default: http://pagescope.com Apply button Clear button Logout button Applies the configuration settings for this window. Resets all configuration settings for this window to their user defaults. Logs out of Administrator Mode and returns to User Mode.

Apply button Clear button
Applies the configuration settings for this window. Resets all configuration settings for this window to their user defaults.

IPP Configuration

The Network - Configuration - IPP Configuration window allows you to configure the following items. For details on IPP, refer to chapter 4, Network Printing in a Windows Environment. In order to apply the settings, the printer must be turned off, then on again after the setting is specified. Item Printer Name Description Sets the printers name. Range: Default: Printer Location Range: Default: Printer Make and Model Printer URI Choices: Default: Up to 127 characters magicolor 2530 DL Up to 127 characters [Blank] Non-configurable KONICA MINOLTA magicolor 2530 DL
Sets the printers location.
Specifies the printer make and model.
Specifies the printers Uniform Resource Identifier (URI), authentication, and security. Range: Defaults: Non-configurable http://192.168.1.2:80/ipp None None http://192.168.1.2:631/ipp None None ipp://192.168.1.2:80/ipp None None ipp://192.168.1.2:631/ipp None None
Item Operations Supported
Description Specifies the enabled printer operations. Choices: Defaults: Non-configurable Print Job, Validate Job, Cancel Job, Get Job Attributes, Get Jobs, Get Printer Attributes
Apply button Clear button Logout button
Applies the configuration settings for this window. Resets all configuration settings for this window to their factory defaults. Logs out of Administrator Mode and returns to User Mode.
Active job, PageScope Web Connection Print job status 114 Administrator mode, PageScope Web Connection 105 AppleTalk 15
Bonjour 129 Bonjour configuration, PageScope Web Connection 129 BOOTP 81, 91
Configuration, PageScope Web Connection 124 Bonjour 129 IPP 130 Rendezvous 129 TCP/IP 124 Windows 127 Consumables, PageScope Web Connection 111 Counter, PageScope Web Connection 112
Details, PageScope Web Connection 108 Consumables 111 Input tray 108 Network 109 Device status, PageScope Web connection 107
Configuration Network settings 80, 124 Printer, via PageScope Web Connection 117

DHCP 81, 87, 91