JJC WS Series WIRELESS CONTROLLER
Thank you for purchasing JJC WS series wireless controller. For the best performance, please read this instruction carefully before using.

1. 2. 3. 4. 5. 6.

Turn off the camera and the WS receiver. Attach the receiver to a compatible cameras accessory shoe. Remove the remote socket cap from camera body. Connect the receiver cable to the remote socket. Mount the camera on a tripod or place the camera on a stable, level surface. Turn on the camera and receiver to enjoy wireless trigger.
Slide the function button in the W Mode. The receiver is active. Under this condition, the receiver can receive the signal from the transmitter; the receiver consumes the power of the battery. User can use the Shutter button of the transmitter and Focus button to trigger the Cameras shutter and focus. Press the transmitters shutter button to take a photo. Press the transmitters Focus button to focus.
Slide the function button in the O Mode. The receiver is turnoff. Under this condition, the transmitter can not active the receiver to control the camera. The receiver will not consume any power of the battery. User can use the shutter button of the receiver to take photos. Press the shutter button halfway to focus. Press it fully to take a photo.
Slide the function button in the L Mode and turn on the camera to BULB mode. Under this condition, the transmitter opens the lens; Slid the function button back to O Mode, the transmitter closes the lens. When the camera is under no-Bulb mode and taking the photo, the transmitter will lock the shutter button, and the camera will implement continuous shooting. Under L mode, the transmitter cannot control the receiver.
Operating range Maximum operating ranges up to 100m. (The operating range may be obstruction or interference with other electronic equipment to reduce the distance)

To replace the Battery

1. The WS receiver is powered by two AAA batteries and the WS transmitter is powered by one 23A battery which are already included in package. 2. Open the battery cover at the back of remote controls. 3. Insert the fresh battery, please ensure the batteries are put into a correct direction. 4. Close the battery cover
Specifications WS Receiver:
Battery Type: 2x AAA battery. Operating temperature: 5 C to 40 C (40 F to 105 F). Net Weight Approximately: 70 g Dimensions: 110 X 45 X 17 mm Length of cord approximately: 100cm

WS Transmitter:

Battery Type: 1x 23A battery. Operating temperature: 5 C to 40 C (40 F to 105 F). Net Weight Approximately: 29 g Dimensions: 88 X 37 X 17 mm

Attention:

When the remote control is not in used over a long time, please remove the battery from the transmitter and receiver.
Do not leave the remote controls in places subject to extremely high temperature. The operable range of the wireless controller will shorten under the following circumstance. 1 When strong light strikes the camera. 2 When the battery is weak. WS-A compatible with Canon
EOS 5D EOS 1Ds Marks III EOS 30D EOS 50D EOS 1D EOS 20D EOS 5D EOS 5D Mark II EOS 1D Mark II EOS 10D EOS 1V EOS 7D EOS 1Ds EOS D60 EOS 3 EOS 1D Mark IV EOS 1Ds Mark II EOS D30 EOS D2000

JJC WR-100 WIRELESS CONTROLLER
Thank you for purchasing JJC WR-100 series wireless controller. For the best performance, please read this instruction carefully before using.
Remove the remote control socket cap of the camera. Take out the JJC WR-100 wireless controller receiver and plug it into the remote control socket of the camera.
Slide the function button in the W Mode. The receiver is active. Under this condition, the receiver can receive the signal from the transmitter; the receiver consumes the power of the battery. User can uses the Shutter button of the transmitter and Focus button to control the Cameras shutter and Focus. Press the transmitters Shutter button to take a photo. Press the transmitters Focus button to focus.
Slide the function button in the O Mode. The receiver is turnoff. Under this condition, the transmitter can not active the receiver to control the camera. The receiver will not consume any power of the battery. User can use the shutter button of the receiver to take photos. Press the shutter button halfway to focus. Press it fully to take a photo.
Slide the function button in the L Mode and turn on the camera to BULB mode. Under this condition, the transmitter opens the lens; Slid the function button in the O Mode, the transmitter closes the lens.
When the camera is under no-Bulb mode and taking the photo, the transmitter will lock the shutter button, and the camera will implement continues shooting. Under L mode, the transmitter can not control the receiver.
Operating range Maximum operating range 100m. (The operating range may be obstructions or interference with other electronic equipment to reduce the distance)
Charging The WR-100 inbuilt High Capacity Li-ion battery. Take out the power adapter, plug it into the power socket of the transmitter and then plug the power adapter to the power outlet. When the transmitter is under charging, the light of transmitter is on. There are 5 lights, each light represent 20% of battery power. When all of the lights are on, which mean the battery is full, please take off the power adapter.
WR-100A compatible with Canon EOS 5D EOS 1Ds Marks III EOS 30D EOS 50D EOS 1D EOS 20D EOS 5D EOS 5D Mark II EOS 1D Mark II EOS 10D EOS 1V EOS 7D EOS 1Ds EOS D60 EOS 3 EOS 1D Mark IV EOS 1Ds Mark II EOS D30 EOS D2000
WR-100B compatible with Nikon/ Kodak/ Fuji D2H D2x Nikon D2Xs D3s F6 Kodak Fuji
*D100 via Vertical Battery Pack
D1x *D100 D700 F100 DCS-14n Finepix S5pro
D1h D200 D3x F90 Finepix S3pro

D1 F5 D300s F90x

WR-100C compatible with Canon/ Pentax/ Contax/ Samsung K100D PENTAX *ist D MZ-6 N/645 K110D *ist Ds ZX-L 645 N Digital GX-1L, EOS 30 EOS 300V GX-1S EOS 33 EOS 300D GX-10 EOS 50E EOS 350D GX-20 EOS 300 EOS 3000 K20D *ist MZ-L N1 NX K200D K7

CONTAX

Samsung CANON
EOS 50 EOS 300X EOS Kiss III EOS 450D
EOS 500 EOS Kiss EOS 7 EOS REBEL XSI
EOS 55 EOS New Kiss EOS 7s EOS KISS X2 Kiss Digital ELAN DATE ELAN IIE Rebel Ti EOS 500D G10
EOS 500N EOS Kiss 7 EOS400D EOS 1000D Kiss Digital N ELAN 7 Rebel 2000 Rebel X Rebel T1i G11
EOS Digital Rebel EOS Digital Rebel xti ELAN 7N ELAN 7NE Rebel G Rebel XS EOS 550D ELAN II ELAN 7N Rebel T2 EOS 1000D Rebel T2i

EOS Digital Rebel XT

WR-100D compatible with Panasonic DMC-FZ15 DMC-FZ30 Panasonic DMC-FZ50S DIGILUX 2 DMC-GH1 Leica DIGILUX3 DMC-FZ20 DMC-FZ30K DMC-FZ50 DIGILUX 3 DMC-GF1 DIGILUX2 DMC-FZ20k DMC-FZ30S LC-1 L-10 DMC-G2 V-LUX1 DMC-FZ20S DMC-FZ50K L1 DMC-G1 DMC-G10
WR-100E compatible with Olympus E1 Olympus E300 * C5060 *
*Via the Power Battery Holder

E10 E100RS C2500L

E20 C8080 * E3

E20N C7070 *

WR-100F compatible with Sony/ KonicaMinolta A100 Sony A700 A850 Maxxum 7D Maxxum 9 Dynax 9 Maxxum 807si KonicaMinolta Maxxum 500si Maxxum 9000 Maxxum 800si Dynax 7000 DiMAGE 7 DiMAGE 7i A200 A900 A450 Maxxum 5D Maxxum 7 Dynax 7 Maxxum 700si Dynax 505si Maxxum 7000 Dynax 807si Dynax 5000 DiMAGE 5 Dynax Sweet Dynax 7D Maxxum 4 Dynax 4 Maxxum 600si Dynax 500si Maxxum 5000 Dynax 800si DiMAGE 7Hi DiMAGE A1 Maxxum Sweets Dynax 5D Maxxum 3 Dynax 3 Maxxum 505si Dynax Sweets Dynax 9000 Dynax 600si Dynax 700si DiMAGE A2 A300 A500 A350 A550
WR-100G compatible with Nikon Nikon D70S WR-100H compatible with Sigma Sigma SD-9 SD-10
WR-100I compatible with Sigma Sigma SD14 WR-100J compatible with Olympus SP-510 UZ

SP-570 UZ

SP-550 UZ

SP-590 UZ E450 E620

SP-560 UZ E400 E510 E30

SP-565 UZ E410 E520 E-P1

Olympus

E420 E600 E-P2

WR-100K compatible with FuijFilm Fujifilm Cameras FinePix S100FS IS-1 FinePix S9000 S20 FinePix S9100 FinePix S205EXR FinePix S9500 FinePix S200EXR FinePix S9600