8.4 15.3 (213) (389) 62.2 (1580)

40.2 (1020)

46.1 (1170)

15.7 (400) 128.8 (3272)

Main body + DF-603 + PF-701 + FD-503 + SD-506
35.2 (895) 113.1 (2872) 120.9 (3072)
Main body + DF-603 + PF-701 + SD-506

62.2 (1580) 40.2 (1020)

30.2 (766) 37.4 (950) 75.8 (1925)
26.6 (675) 30.5 (775) 7.9(200)
Main body + DF-603 + PF-701 + SD-506 (Side view)
48.5 (1231) 48.1 (1223) 22.2 (563) 29.1 (740) 15.7 (400) 134.1 (3405) 35.2 (895) 145.9 (3705) 31.8 (807)

7.9 (200)

Main body + DF-603 + PF-701 + FD-503 + PB-502

48.1 (1223)

22.2 (563)

29.1 (740)

46.1 (1170) 164.4 (4175)

35.2 (895) 176.2 (4475)

Main body + DF-603 + PF-701 + SD-506 + PB-502
25.6 (650) 48.5 (1231) 48.1 (1223)

46.1 (1170) 180.1 (4575)

15.7 (400) 191.9 (4875)
Main body + DF-603 + PF-701 + FD-503 + SD-506 + PB-502
Unit: inches (mm) 25.6 (650) 8.4 (213) 48.1 (1223) 12.0(306) 15.3 (389) 62.2 (1580) 40.2 (1020)

149.2 (3790)

35.2 (895) 161.0 (4090)
Main body + DF-603 + PF-701 + LS-501/LS-505 + PB-502
15.3 8.4 (213) (389) 62.2 (1580)

29.1 (740) 118.3 (3005)

35.2 (895) 130.1 (3305)
Main body + DF-603 + PF-701 + PB-502
Unit: inches (mm) 12.0(306) 25.6 (650) 15.3 8.4 (213) (389) 62.2 (1580) 40.2 (1020)

4.6(117) 3.9 (100)

10.5 15.7 (267) (400)
35.2 (895) 93.3 (2369) 101.1 (2569)
Main body + DF-603 + PF-701 + FD-503

25.6 (650) 8.4 (213)

12.0(306) 15.3 (389) 62.2 (1580) 40.2 (1020)
21.4 9.3 (237) (544) 3.4(85)
30.9 (785) 178.1 (4523) 185.9 (4723)
Main body + DF-603 + PF-701 + LS-501/LS-505 + SD-506 + FS-503
Unit: inches (mm) 25.6 (650) 12.0(306) 8.4 15.3 (213) (389) 62.2 (1580) 40.2 (1020)

48.5 (1231) 48.1 (1223)

15.7 (400) 165 (4190)

176.8 (4490)

Main body + DF-603 + PF-701 + FD-503 + LS-501/LS-505 + PB-502
1050P/1050eP Installation Space
Allow sufficient space for facilitating copy operation, replenishing consumables, changing parts, and periodic inspection. The whole machine may weigh approx. 2,302.2 lb (1,051 kg) at maximum, depending on the combination of options. Be sure to choose a level and solid floor for the installation place.
Unit: inches (mm) 12.0(306) 15.3 (389) 62.2 (1580) 40.2 (1020)
Main body + PF-701 + LS-505
1050P/1050eP Installation Space (continued)
Main body + PF-701 + LS-505 + LS-502
Main body + PF-701 + FD-503 + FS-503

Can be turned clockwise to feed mishandled paper to the stacker. Can be turned clockwise to feed mishandled paper to the secondary (sub) tray. Can be turned clockwise to feed mishandled paper to the outlet. Opens downward to remove mishandled paper. Holds sets output in Non-sort mode or Collate mode (offset). Opens downward to remove mishandled paper. Carries paper together with the stacker. Mounts paper stopper for holding output paper. Holds output paper.

External View

No. 9 Name Primary (Main) tray Fold mode tray Coordinating stopper Lower tray Lower tray guide plates Upper tray Upper tray guide plates Upper cover handle Folding unit door Description Holds sets output in Fold mode or Punch mode. Holds sets output in Tri-Fold-in, Tri-Fold-out, Double Parallel, or Gate Fold mode. Holds double-parallel- or gate-folded sets in order to prevent them from collapsing. Holds cover sheets. Hold cover sheets to fix the position. Holds cover sheets. Hold cover sheets to fix the position. Opens to allow removal of mishandled paper. Opens to allow removal of mishandled paper or waste paper.

Internal View

No. Name Inlet lever Post inserter conveyance lever (behind the inlet lever) Waste basket Upper/Lower conveyance lever Folding unit handle Conveyance knob/1 Outlet lever Upper/Lower right side lever Upper/Middle/Lower knob Left side lever (right/left) Upper lever Conveyance knob/2 Description Opens leftward to remove mishandled paper. Opens leftward to remove mishandled paper.
Holds waste paper punched out. Opens rightward to remove mishandled paper. Withdraws the unit to allow removal of mishandled paper. Can be turned counterclockwise to ease removal of mishandled paper. Opens rightward to remove mishandled paper. Opens upward to remove mishandled paper. Can be turned clockwise to ease removal of mishandled paper. Opens leftward to remove mishandled paper. Opens upward to remove mishandled paper. Can be turned clockwise to ease removal of mishandled cover paper.
No. Name Secondary (Sub) tray of Saddle stitcher Multi tri-folding mode outlet cover handle Multi tri-folding mode tray Secondary (Sub) tray Right side door of Saddle stitcher Saddle stitcher tray Waste basket Left side door of Saddle stitcher Description Holds non-sorted sets output from Saddle stitcher. Opens upward to remove mishandled paper. Holds sets output in multi tri-folding mode. Holds non-sorted sets output from the machine on the right side of the Saddle stitcher. Opens to remove mishandled paper. Withdrawn when using Fold & Staple and multi half folding mode. Withdrawn to remove waste paper. Opens for staple supply or to remove mishandled paper.

No. Name Upper cover lever of Folding unit Secondary (Sub) tray conveyance lever (middle) Folding unit drawer handle Secondary (Sub) tray conveyance lever (right) Inlet lever Feeding knob Folding unit conveyance lever Folding unit conveyance cover handle Folding unit front cover lever Stapling unit Stapling unit knob Outlet lever Outlet conveyance lever Description Opens the upper cover to remove paper misfed inside the Folding unit. Opens downward to remove mishandled paper.
Opens the drawer to remove paper misfed inside the Folding unit. Opens upward to remove mishandled paper. Opens leftward to remove mishandled paper. Can be turned clockwise to feed mishandled paper to the Folding unit. Opens rightward to remove mishandled paper. Opens the cover to remove mishandled paper. Opens upward to remove mishandled paper. Staples folded sets. Can be turned clockwise to feed mishandled paper. Opens leftward to remove mishandled paper. Opens downward to remove mishandled paper.
No. 7 Name Paste hopper cover Secondary (Sub) tray Front door of Perfect Binder PB-502 Cover feeding tray Perfect binder tray Perfect binder tray cover Feeding button Description Opens for supply of paste pellet of for removal of paste pellets stuck inside the paste hopper. Holds sets output without being processed by the perfect binder. Opens to remove mishandled paper and waste trimmings. Holds cover paper. Holds sets output in Perfect Binding mode. Opens to take out the bound sets from the tray. Pressed to feed the bound set leftward.
No. Name Body set releasing knob in clamp unit Clamp unit conveyance knob Pellet stacking correction lever Clamp unit lever Secondary (Sub) tray conveyance knob Body set conveyance lever (upper) Body set conveyance lever (lower) Cover conveyance lever (left) Cover conveyance lever (right) Cover conveyance lever (lower) Cover conveyance knob Trim dust box Description Can be turned clockwise to take out the body set fixed in the clamp unit. Can be turned clockwise to feed the body set for removal of mishandled paper. Pushed downward for removal of paste pellets stuck inside the paste hopper. Can be turned clockwise to withdraw the clamp unit for removal of body set mishandled in the clamp unit. Can be turned counterclockwise to feed the mishandled paper into the secondary (sub) tray. Opens downward to remove mishandled body set. Opens upward to remove mishandled body set. Opens upward to remove mishandled cover sheet. Opens leftward to remove mishandled cover sheet. Opens leftward with the trim dust box drawn out to remove mishandled cover sheet. Can be turned clockwise to remove mishandled cover sheet. Withdrawn to remove waste paper.

No. Name Binding unit descending knob Jam position display Cover control releasing knob Cover fixing plate releasing knob (right/left) Binding unit releasing knob Description Can be turned downward to let the binding unit down for removal of mishandled paper. Indicates the position of mishandled paper by LED lamps. Can be turned clockwise to remove cover sheet from the binding unit. Can be turned clockwise for the left knob and counterclockwise for the right knob to release the cover fixing plate for removal of mishandled paper. Can be turned downward to remove cover sheet from the binding unit in the top position.
Removing Finished Sets from Large Capacity Stacker LS-505
The Large Capacity Stacker LS-505 can hold 5,000 output sheets (3,000 sheets for coated paper of Max. 13.0" 19.0" (331 mm 483 mm) to Min. 8.3" 15.0" (210 mm 380 mm) / 2,000 sheets for B5 and A5) at maximum. Follow the procedure below to take out paper from the stacker.
The paper stopper is provided to secure the paper in position when moving the carriage.

To remove finished sets

Press the Paper removal button.
The stacker unit will move down to the carriage.
Open the large capacity stacker door. Once the stacker holds a sheet of output paper, the large capacity stacker door will be locked and cannot open till the stacker unit goes down fully to the carriage.
Withdraw the carriage by holding its handle. Be sure to withdraw the carriage straightforward, and do not change the direction forcibly while driving it.
Remove the sheets from the carriage. The stacker unit can be removed from the carriage.
Return the carriage to its original position, then close the large capacity stacker door.
The carriage is for the exclusive use of carrying paper. Do not drive it in any other use. Never put yourself in the large capacity stacker. Once lowering the stacker unit for the purpose of removing mishandled paper or checking output sheets, be sure to remove all the sheets from the carriage. If the carriage is returned with any sheets left on the stacker unit, machine trouble may be caused. When returning the stacker unit to its original position, fit the two projections of the carriage to the two holes of the stacker unit, otherwise the carriage cannot be returned properly.
To secure paper on the carriage

Touch OK. The Output Application Screen will be restored.
If you touch Cancel, the previous setting will be restored. Touching Function Off will deselect the Fold&Staple (and Trimming) mode, however, the specified setting will be kept in memory.
Touch OK on the Output Application Screen. The output icon of the selected output mode will be displayed on the Copy Screen. Booklet function in the Application setting has been selected automatically.
Withdraw the Saddle stitcher tray. Open the tray stand when fully withdrawn.
The folded and stapled (and trimmed) sets will be delivered into the Saddle stitcher tray. If the tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications.
Never return the Saddle stitcher tray to its original position with the tray stand opened.
Folding Copied Set (1050/1050e only)
Machine with the Saddle Stitcher SD-506 installed provides Multi Center mode to double-fold up to 5 sheets of copied set, or Multi Letter mode to fold it inside in three. Using Multi Letter, the print side can be specified on the screen.
Specifications for Multi Center / Multi Letter
Using Multi Half Fold mode, the finished sets will be delivered to the saddle stitcher tray. Using Multi Tri-Fold mode, the finished sets will be delivered to the multi-folding mode tray.
Multi Center + Non Trimming Multi Center + Trimminng Multi Letter + Inside Print Multi Letter + Outside Print
Touch Multi Center or Multi Letter to select it. If Multi Center is selected, the Multi Center Screen will be displayed to specify whether or not to trim the edge of the folded sheets.
Touch Trimming or Non Trimming to select it. Touch OK. The Output Application Screen will be restored. If Multi Letter is selected, the Multi Letter Screen will be displayed to specify the print side.
Touch Outside Print or Inside Print to select it. Touch OK. The Output Application Screen will be restored.
If you touch Cancel, the previous setting will be restored. Touching Function Off will deselect the mode, however, the specified setting will be kept in memory.
Touch OK on the Output Application Screen. The output icon of the selected output mode will be displayed on the Copy Screen. With Multi Center selected, Booklet function in the Application setting has been selected automatically.

If Multi Center is selected, withdraw the Saddle stitcher tray. Open the tray stand when fully withdrawn.
The double-folded sets will be delivered into the Saddle stitcher tray. If the tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications. The triple-folded sets will be delivered into the Multi-folding tray.
Using Perfect Binder PB-502
The machine with the optional Perfect Binder PB-502 installed automatically attaches a copied set with a cover sheet to make a perfect-bound book, applying a dab of glue in the center line of the cover sheet to fix the spine. In the Perfect Binding mode, both simplex and duplex copying are available for the body set, and also the cover sheet can be blank, simplex-printed or duplex-printed, and even trimmed to match with the thickness of the body set to cover. The binding direction can be selected from left and right.
Use only the paste GC-501 for this binder. Handle melted hot paste only with great care. In order to prevent degradation of paste owing to heating, ensure that the machine is turned off when it is not in use. It is recommended that you adjust the time settings for the low power mode and shut-off mode to the main body to suite the usage of the Perfect Binder, since they apply to the binder as well.
Body set Back side of Front cover Cover lead edge adjustment
Left binding (When right binding, the cover is upside down.) Back side of Back cover Head
Cover Cover trimming Front side of Front cover Spine width Foot Front side of Back cover
Using Perfect Binder PB-502 (continued)

Even number originals

Body set: simplex, Cover print: Off Blank Blank
Blank Body set: duplex, Cover print: Off Blank
Blank Body set: duplex, Cover print: On, Cover print side: simplex
Blank Body set: duplex, Cover print: On, Cover print side: duplex

Body set

Odd number originals
Blank Body set: duplex, Cover print: On, Cover print side: duplex Blank
Specifications for Using Perfect Binder PB-502
Warm-up/Low Power/Shut-Off The perfect binder requires longer warm-up time than that required for the main body, while the Low Power/Shut-Off mode activates at the same time on main body and perfect binder. We recommend you to specify the time to activate the Low Power/Shut-Off mode in view of the frequency to use the perfect binder. Paper tray Body: Tray 1 to 5 Cover: Tray 1 to 5 (available for Cover Print), Cover feeding tray of Perfect binder (unavailable for Cover Print), Upper/Lower tray of the post inserter on Folding unit (unavailable for Cover Print) Paper size Body: Standard sizes 8.5" 11", 5.5" 8.5", A4, B5, A5, 16K (11" 17", 8.5" 11"R, A3, B4, A4R, 8K when using Z-Fold mode) Wide sizes 8.5" 11"W, 5.5" 8.5"W, A4W, B5W, A5W Custom sizes*1 5.91" 5.51" min. to 12.09" 8.70" max. Cover: Custom size*1 Length (head to foot): Same as that of body set (within +5 mm) Width: Book width 2 + body sets thickness (1 mm or more) + (3 mm or more of trimming width if Trimming mode is specified) The maximum size accommodable in each tray is as follows. Tray 1 to 5*2: 5.91" 11.06" min. to 12.76" 18.11" max. Cover feeding tray of Perfect binder: 5.91" 11.06" min. to 12.99" 18.58" max. Upper/Lower tray of the post inserter on Folding unit: 7.17" 11.06" min. to 12.99" 19.02" max. Paper weight Body: 13 to 80 lb Bond (*3Available weight can be specified from 62 ~ 71 g/m2 to 72 ~ 91 g/m2.) Cover: 22 to 42 lb Bond (*3Available weight can be specified from 72 ~ 91 g/ m2, 92 ~ 130 g/m2, to 131 ~ 161 g/m2.) Number of sheets to be bound: 10 sheets min. to 300 sheets max., or within 30 mm thick*4 Fine/Colored/Matted: 10 sheets min. to 150 sheets max., or within 15 mm thick*3 Z-folded insertions: 4 sheets max. for standard/recycled, or 2 sheets max. for simplex-copied 2 sheets max. for fine/colored/matted Maximum number of Z-folded insertions and body sheets:

Z-folded insertions 1 sheet 2 sheets 3 sheets 4 sheets
Body sheets 200 sheets 150 sheets 100 sheets 50 sheets
Total at maximum 201 sheets 152 sheets 103 sheets 54 sheets
Covers fed from tray 1 to 5 can be simplex- or duplex-printed, while those loaded in the cover feeding tray of Perfect binder or the upper/lower tray of post inserter on Folding unit cannot be printed. Cover Trimming function trims the cover by the amount automatically estimated from the following formula, in the range from 3 mm to 40 mm in 0.1 mm increments. (Cover width) (Body width 2) (Spine width) If the estimated amount exceeds 10 mm, perfect binder will trim the cover automatically whether this function is activated or not. Fine Adjustment Cover Lead Edge Adjustment adjusts the position of front cover and body set in widthwise direction in the range from 12.8 mm to +12.8 mm in 0.1 mm increments. Cover Trimming Adjustment adjusts the trimming width in the range from 5.0 mm to +5.0 mm in 0.1 mm increments. Cover Image Shift Adjustment adjusts the position of image to be printed on the front cover when using Cover Print mode. For specifications of the secondary (sub) tray, see p. 64, p. 66 and p. 70. *1: Specify the custom size of covers from the Perfect Binding Screen. For details, see p. 55. *2: For 8.5" 11" body set to be bound with a cover sheet fed from tray 1 to 5, the maximum thickness will be less than 30 mm. Cover Trimming Off: 460 (216 2) = 28 mm Cover Trimming On: 460 (216 2) (Trimming width 3 mm) = 25 mm If thickness of 8.511 body set is more than that mentioned above, use the cover feeding tray of Perfect binder or the tray of post inserter on Folding unit to attach a cover. 3 * : You can specify the paper weight available for body sets and covers in Perfect Binding mode. For details, see POD Administrators reference, p. 526. *4: The minimum/maximum number of sheets to be bound in Perfect Binding can be changed according to the paper weight of body set. For details, see POD Administrators reference, p. 5-27. Also, the machine can be set to detect the thickness of body set and to stop the binding operation temporarily if the width of the cover to be used is unsuitable for the body set. For details, see POD Administrators reference, p. 5-28.

Making Perfect-Bound Book (1050/1050e only)
Load paper for body sets and covers in each tray to be used. Load paper for body sets in one of the tray 1 to 5. When printing on covers, also load cover sheets in one of the tray 1 to 5. If cover print is not required, load cover sheets in one of the tray 1 to 5, cover feeding tray of Perfect binder, and upper/lower tray of post inserter on Folding unit.
While the Perfect binder is warming up, the Machine Status Screen will prompt you the current warmup status of the machine.
Custom paper size is to be used as cover. Be sure to check the precise dimensions in order to specify them during this procedure. If Cover Trimming is desired, be sure to use the size that secures 3 mm to 40 mm of trimming width. When using the Post Inserter, touch [For P.B. Cover] on the Machine Status Screen to highlight it.
Touch COPY tab to display the Copy Screen, select the tray loaded with paper for body sets, and change the paper setting as required.
The paper size will be detected automatically. If paper weight specified for the tray loaded with paper for body sets is inadequate, the binding operation cannot be performed. Select one from 62-71g and 72-91g.
The binding operation may not be performed even if the paper weight mentioned above is specified. For details, see POD Administrators reference, p. 5-26. The number of body set may be limited depending on the selected paper weight. For details, see POD Administrators reference, p. 5-27.
Touch Output Application, then touch Perfect Bind.
The Perfect Binding Screen will be displayed.
Select the tray loaded with covers, then specify the paper setting. (1) Touch Cover Tray to display the Cover Tray Screen.
(2) Touch the tray loaded with covers in step 1 to highlight it.
If any other tray than tray 1 to 5, the Cover Print setting in step 5 will be limited to Cover Print Off.
(3) Touch Change Paper Set to display the Tray Setting Screen.
(4) Enter the cover paper dimensions. Touch Size Setting to display the Size Setting Screen.
Use the screen keypad or arrow keys and to enter the dimensions of the covers loaded in step 1, then touch OK.
Be sure to enter the cover paper dimensions precisely; otherwise a message may be displayed to prompt you that the specified size is inadequate, or the trimming function may not be performed properly.
(5) Specify the paper type and weight. Touch Change to display the Change Setting Screen.

Touch Type to select the desired paper type, then touch OK.
Touch Weight to select the desired paper weight, then touch OK. If unsuitable selection is made, the binding operation will not be performed.
Select the desired one from 72-91g, 92-130g and 131-161g.
The binding operation may not be performed even if one of the paper weight mentioned above is specified. For details, see POD Administrators reference, p. 5-26.
To recall the paper setting previously registered, touch Type/Weight to display the Register Screen, select the desired key, then touch OK.
Touch Close. (6) Touch OK on the Cover Tray Screen.
Specify the cover print setting. This setting is available when one of the tray 1 to 5 is specified as the cover tray source. Select On to print on covers, or Off to attach blank covers. Also select Simplex to print only on the front side, or Duplex to have both front and back sides printed.
For details of finished result with each setting specified, see p. 47 to p. 48. The original image to be printed on cover varies depending on whether the original count is odd or even.
Specify the spine width. Touch Spine Width (1-30 mm) to display the Spine Width Screen.
Use the screen keypad, arrow keys and , or the control panel keypad to enter the desired value, then touch OK.
Specify the cover trimming setting. Touch On to trim the cover, or No to deactivate this function.
If the trimming width estimated by the machine does not fall within the range from 3 to 40 mm, a message will be displayed to inform you that the trimming mode is unavailable. In this case, adjust the cover or spine width to enable this setting.
Make fine adjustments for the lead edge, trimming width, and image position of the cover. Touch Fine Adjustment to display the Fine Adjustment Screen.
To adjust the lead edge of the cover, touch Cover Lead Edge Adj. Use +5 to select positive/negative, then use the screen keypad, arrow keys and , or the control panel keypad to enter the desired value. To adjust the trimming width, touch Cover Trimming Adj. Use +5 to select positive/negative, then use the screen keypad, arrow keys and , or the control panel keypad to enter the desired value. To adjust the image position of the cover, touch Cover Image Shift Adj.

Touch Front or Back to select the printed side, then Up/Down or Right/ Left to select the direction to be adjusted. Use +5 to select positive/negative, then use the screen keypad, arrow keys and , or the control panel keypad to enter the desired value. Touch OK to complete the setting.
9. Touch OK to return to the Copy Screen. 10. Select additional copy conditions, as desired.
When making double-sided copies, select 1-2 or 2-2. If the original count exceeds 100, use Memory Scan mode. Proof copy is recommended before making multiple sets. After proof copying, the thickness of body set will be displayed on the Perfect Binding Screen. Use this information if making any adjustment.
11. Enter the desired print quantity from the control panel keypad.

12. Position originals.

If Cover Print On is selected, refer to p. 47 to p. 48.
13. Press [Start] on the control panel.
Copying does not start while the Perfect binder is warming up. When warmup is completed, the machine operation starts automatically.
Never open the front door of the Perfect binder while the machine operation is in process; otherwise the machine immediately stops the operation and paper jam may be caused.
If the cover width has been specified improperly, the machine temporarily stops its operation with a popup menu displayed to ask you whether or not to continue the operation. Machine manager can set the machine to display/disappear this popup menu. For details, see POD Administrators reference, p. 5-28.
14. Take out the perfect-bound books from the perfect binder tray.
To take out the books stacked in the rear side of the perfect binder tray, press the feeding button to move them forward.
Open the perfect binder tray cover.
The perfect binder tray cover will not open while the machine operation is in process, and also the feeding button will not function.
Take out the books, then close the perfect binder tray cover.
Paper and Original Information
This machine is additionally provided with the following trays for loading copy paper. Cover feeding tray of Perfect Binder PB-502 Post Inserter (attached to Folding Unit FD-503) Also, the following additional equipment is provided for conveying/delivering copies. Folding Unit FD-503 Saddle Stitcher SD-506 Large Capacity Stacker LS-505 Perfect Binder PB-502 Refer to the following information on paper capacity for each.

Paper Weight

Paper Trays Tray 1 and 2 (Main body trays) Tray 3 and 5 (PF-701 trays) Weight 11 to 64 lb Bond Cover paper for perfect binding: 22 to 42 lb Bond 11 to 64 lb Bond Cover paper for perfect binding: 22 to 42 lb Bond 11 to 80 lb Bond Cover paper for perfect binding: 22 to 42 lb Bond

Secondary (sub) tray Saddle Stitcher SD-506 Fold & Staple High quality paper (pagination per set)
Saddle Stitcher SD-506 Fold & Staple Coated paper (pagination per set) 13 to 21 lb Bond: 30 sheets or 29 sheets + 1 (53 lb Bond) 22 to 24 lb Bond: 15 sheets or 14 sheets + 1 (53 lb Bond) 24 to 34 lb Bond: 10 sheets or 9 sheets + 1 (53 lb Bond) 35 to 42 lb Bond: 5 sheets or 4 sheets + 1 (53 lb Bond) 2 to 10-sheet-folded set: 50 sets 11 to 20-sheet-folded set: 30 sets 21 to 40-sheet-folded set: 20 sets 41 to 50-sheet-folded set: 15 sets (with the saddle stitcher tray fully withdrawn) Max. trimmed sheets: 50 sheets (21 lb Bond) 2, or 49 sheets (21 lb Bond) + 1 (53 lb Bond) 2 Max. folded sheets: 5 sheets (13 to 21 lb Bond) Tray capacity: 30 sets (Saddle stitcher tray) Max. folded sheets: 5 sheets (13 to 21 lb Bond) Tray capacity: 1-sheet-folded set: 40 sets 2 to 3-sheet-folded set: 30 sets 4 to 5-sheet-folded set: 20 sets (Multi tri-fold tray) 1 set of maximum thickness (approx. 1.18"/30 mm) columns* (approx. 6,600 sheets, 21 lb Bond) *Automatically shifts to the second column when the first column is detected as full load. The Full load detection function on Perfect binder counts one column to be full when the following amount is reached in order to prevent the piled sets from collapsing. 10 to 30-sheet-bound set: 50 sets 31 to 150-sheet-bound set: 35 sets or until detected as full load 151 to 300-sheet-bound set: until detected as full load Max. 200 sheets (with Full load detection function activated)
Fold & Staple Saddle stitcher tray capacity Trimming Multi Half Fold Multi Tri Fold

Perfect binder tray

Secondary (sub) tray
Saddle stitcher tray information: If the Saddle stitcher tray is not fully withdrawn, the machine will detect that the tray is filled up, even with less number of finished sets than that specified in specifications. Height of the folded and stapled booklet The following table shows the standard height of folded and stapled booklet according to the number of sheets and paper size.
Paper size Number of sheets (1 set)
1218 w, 1117 w, A3 (401 mm or more) 35 mm 45 mm 50 mm 60 mm
8.514 w, B4 w, 8K w (301 ~ 400 mm) 40 mm 50 mm 55 mm 65 mm
8.511 w, A4 w , 16K w (261 ~ 81 mm) 45 mm Not specified Not specified Not specified
B5 w (260 mm or less) Not specified Not specified Not specified Not specified

2~5 6~ ~ ~ 50

Some types of 13 to 21 lb Bond high quality paper may be limited to 30 sheets or 29 sheets + 1 (53 lb Bond) in pagination. Contact your ser vice representative, if details desired.
When using 13 to 24 lb Bond high quality paper of the length 81 mm or less and grain long, be sure to limit the pagination to 30 sheets or 29 sheets + 1 (53 lb Bond).

Follow the procedure below to empty the dust box.

Withdraw the dust box.

The dust box cannot be withdrawn while machine operation is in progress. Be sure to confirm that the machine has stopped its operation before withdrawing the dust box.
Open the top cover of the dust box.
Take waste paper out of the dust box.
Close the top cover of the dust box, then return it to its original position.
Be sure to return the dust box to its original position, otherwise the trimming function cannot be performed.
Empty Dust Box of Perfect Binder PB-502
When the dust box of the Perfect Binder PB-502 becomes full, the Trim Dust indicator lights in red in the option status area of the Machine Status Screen. If printing job is in progress, a message will be displayed on the Copy Screen.
Open the front door of the perfect binder.
Do not open the front door while machine operation is in progress, otherwise a paper jam may be caused. Be sure to confirm that the machine has stopped its operation before opening the front door.
Return the dust box to its original position, then close the front door of the perfect binder.

Specifications

Name: Function: Paper types: Paper sizes: LS-505 Stack printed paper Stacker: 13 to 64 lb Bond Secondary (sub) tray: 13 to 81 lb Bond Stacker: 12" 18 w, 11" 17" w, 8.5" 14" w, 8.5" 11" w/v, A3 w, B4 w, A4 w/v, B5 v, A5 v, Foolscap, 8K w, 16K v, Wide Size and custom sizes (max. 13.03" 19.21" (331 mm 488 mm) to min. 8.27" 5.83" (210 mm 148 mm)) Secondary (sub) tray: 12" 18 w, 11" 17" w, 8.5" 14" w, 8.5" 11" w/v, 5.5" 8.5" w/v, A3 w, B4 w, A4 w/v, B5 w/v, A5 w/v, B6 w, A6 w, Foolscap, 8K w, 16K w/v, Wide Size and custom sizes (max. 13.03" 19.21" (331 mm 488 mm) to min. 3.94" 5.83" (100 mm 148 mm)) Tabbed paper is output to the secondary (sub) tray. See p. 69 for details. Stacker: 5,000 sheets 2,000 sheets for B5 w and A5 w 3,000 sheets for Coated paper and max. 13.03" 19.21" (331 mm 488 mm) to min. 8.27" 14.96" (210 mm 380 mm) paper Secondary (sub) tray: 200 sheets Supplied from internal battery 30.9 (W) 28.5 (D) 40.2 (H) inches Approx. 243 lb

How to Build a System for the bizhub PRO C6501/C6501P Digital Printer/Copier/Scanner (from start to nish)

10/2008

FD-503

LS-505

RU-504

SD-506 + LS-505

PF-602

IC-304 Plus

LS-505 + FD-503

SD-506 + FD-503

** Not available with the C6501P.

FS-520

* IC-303 does not support FS-520. ** Not available with the C6501P.

SD-506

FS-521

FS-521 + FD-503

FS-521 + LS-505

FS-521 + SD-506

FS-521 + SD-506 + FD-503

PB-502

PB-502 + FD-503

PB-502 + SD-506

PB-502 + SD-506 + FD-503

PB-502 + LS-505

Accessory Options for bizhub PRO C6501/C6501P Digital Printer/Copier/Scanner

ACCESSORY

ITEM NUMBER DESCRIPTION

BASE UNIT

bizhub PRO C6501 bizhub PRO C6501P A0U0011 AOUppm Printer/Copier/Scanner 65 ppm Printer
Includes: (4) Drum, (4) Developer, 1 GB Memory, Tray 1/2/3: 500 sheets each, Intelligent Bypass*: 250 sheets, Total Standard Paper Capacity: 1,750 sheets (7,500 sheets max.). Includes: (4) Drum, (4) Developer, 1 GB Memory, Tray 1/2/3: 500 sheets each, Intelligent Bypass*: 250 sheets, Total Standard Paper Capacity: 1,750 sheets (7,500 sheets max.).
DOCUMENT HANDLING OPTIONS
OC-506 DF-609 LU-202 PF-602 HT-504 HT-503 FS-607 FS-520 FS-521 FD-503 PK-512 PI-502 SD-506 PB-502 LS-505 RU-504 A0420Y0 A052WY1 A03WWW0 AOU4WY1 A0410Y1 A0410Y0 A04DWW0 A0DRWW0 A0GYWY1 A0H0W11 A04F0Y1 A04HWY1 A0H2WY1 A0V9011 A0H1W11 A04KWY1 A03Y0Y0 A0MD0Y0 A073WW0 A0360Y0 Original Cover
Not available with the C6501P.
Reversing Automatic Document Feeder 100 sheet capacity. Not available with the C6501P. Large Capacity Tray Paper Feed Unit Dehumidier Heater for PF-602 Dehumidier Heater for LU-202 Booklet Finisher Stapler Finisher 100-Sheet Stapling Finisher Multi-Folding Unit 2/3-Hole Punch Kit for FS-607 Post Inserter for FS-607 Saddle Stitch Finisher Perfect Binder Unit Large Capacity Stacker Relay Unit (with power supply) 4 x 40 GB Hard Drives (all included in kit) External Fiery Image Controller External Creo Image Controller Embedded Fiery Image Controller

PAPER SUPPLY OPTIONS

2500 sheet capacity (for Entry version). 6000 sheet capacity (2 x 3000). Helps remove curl/ripples from coated stocks. Helps remove curl/ripples from coated stocks.

OUTPUT OPTIONS

Saddle stitch up to 20 sheets (80-page booklets), half-fold, tri-fold, 50-sheet stapling. 3,000 sheet output capacity, 50-sheet stapling. Staples are custom cut for clean output regardless of set size. 6 fold types (half, gate, z, double parallel, letter-in, letter-out), 2/3-hole punch, post inserter.
Up to 50-sheets (200-pages) with face trim. Perfect bind up to 300 sheets. 600 pages with printed and trimmed cover. 5000-sheet capacity, includes roll-away cart. Required on PRO congurations that include FS-521 See conguration section.

HDD OPTION

HD-506 IC-305 IC-304 Plus IC-GB 2 GB
Required for Overlay/Watermark.

CONTROLLER OPTIONS

External Fiery PRO 80 Intel Core 2 Duo 2.13 GHz RoHS 1 GB Memory, 160 GB HDD Fiery System 8/R2. External Creo Intel Core 2 Duo Processor, Fusion In board, 1 GB system memory, 1 GB image memory, 250 GB SATA system and user disk, GB SATA image disk space. Embedded Fiery X3eTY2 (Celeron-D @ 2.8 GHz, 512 MB memory, 80 GB HDD, Fiery System 8e software). Not available with the C6501P. Patch le required (See ONYX). Patch le required (See ONYX).
GB Memory Upgrade for IC-2 GB Memory Upgrade for IC-305

CONSUMABLES

ACCESSORY ITEM NUMBER DESCRIPTION YIELD
TN612K A0VW130 TN612Y A0VW230 TN612M A0VW330 TN612C A0VW430 DV610K A04P600 DV610Y A04P700 DV610M A04P800 DV610C A04P900 DU-102 A0400Y0 Staples (for FS-521) 14YJ Staples (for FS-520) 14YK Staples (for FS-607) 4448121 Staples (for SD-506) 14YH GC-501 A0800Y0
Black Toner Yellow Toner Magenta Toner Cyan Toner Black Developer Yellow Developer Magenta Developer Cyan Developer Drum Unit Staples for FS-521 Staples for FS-520 Staples for FS-607 Staples for SD-506 Glue Chips for PB-502
38,500 @ 5% coverage 26,000 @ 5% coverage 26,000 @ 5% coverage 26,000 @ 5% coverage 200,000 200,000 200,000 200,000 200,x x x x Books**
* Bypass only accessible when PF-602 not installed ** Yield based on 100 letter-sized sheets