5.3 SCANNING...5-10 5.4 PRINTING...5-11 6. MAINTENANCE....6-1 7. TROUBLESHOOTING...7-1 7.1 QUESTIONS AND ANSWERS..7-1 7.2 TECHNICAL SERVICE...7-5 8. SPECIFICATIONS...8-1 9. SC-110 AUTOMATIC DOCUMENT FEEDE (ADF) USERS GUIDE.9-1 9.1 INSTALLING THE ADF....9-1 9.1.1 UNPACKING THE ADF..9-1 9.1.2 INSTALLING THE ADF...9-2 9.1.3 UNLOCKING THE SC-110...9-4 9.1.4 CONNECTING THE CABLES..9-5 9.2 USING THE ADF....9-6 9.2.1 BEFORE YOU BEGIN...9-6 9.2.2 LOADING THE PAPER...9-7 9.2.3 STARTING YOUR FIRST COPY..9-7 9.2.4 STARTING YOUR FIRST SCAN..9-9 9.3 MAINTAINING THE ADF...9-13 9.3.1 CLEANING THE ADF...9-13 9.3.2 REPLACING THE ADF SNAP-IN PAD MODULE.9-15 9.4 HOW TO CLEAR THE PAPER JAM..9-17 9.5 ADF SPECIFICATION...9-18

INTRODUCTION

Congratulations on your purchase of SC-110. The SC-110 produces better printing quality and is free from maintenance, compared with traditional copy machines. Its high printing quality, maintenance-free operation and affordability make SC110 the best convenience copier solution for office. The following sections introduce the unpacking, hardware and software installation, operation, and maintenance information. Please spend a few minutes reading through them to help you maintain quality scanning results. Figure 1-1 shows the package contents. Please check all the items against Figure 1-1. If there is any missing or damaged, please contact your nearest dealer immediately for the replacement.

1. 2. 3. 4. 5.

Software CD Power Adapter SC-110 Parallel Cable Quick Installation Guide SC-110 main unit
Figure 1-1 SC-110 packing

2. INSTALLATION

2.1 PRECAUTIONS Keep the SC-110 out of direct sunlight. Direct exposure to the sun or excessive heat may cause damage to the unit. Do not install the SC-110 in a humid or dusty place. Be sure to use the proper AC power source. Place the SC-110 securely on an even, flat surface. Tilted or uneven surfaces may cause mechanical or paper-feeding problems. Retain the SC-110 box and packing materials for shipping purposes.
UNLOCKING THE SC-110 To protect the scanning head from damage during shipment, the SC-110 is designed with a lock switch beneath the main unit. Therefore, before using the SC-110, it is required to unlock SC-110 by moving the lock switch to the Use position.(See Figure 2-1)

1. Shipping Position

2. Use Position
Figure 2-1 Unlocking the SC-110

CONNECTING THE CABLE

CONNECTING SC-110 TO WORK AS A COPIER Connect the power cable and signal cable as shown below.

Printer Cable

Power Cable
To Power Outlet To Printer
Figure 2-2 Connect SC-110 to a printer
CONNECTING SC-110 TO WORK AS A SCANNER/COPIER
SC-110 Parallel Cable Power Cable

To Power Outlet To Printer To PC Parallel Port Figure 2-3 SC-110 Cable Connection To optional ADF
DOCUMENT PLACEMENT As shown in Figure 2-4, place the document on the glass face (text) down.

1. 2. 3. 4.

Document Cover Home Position Mark Document Document Glass
Figure 2.4 Document Placement
3. USING SC-110 AS A COPIER

3.1 THE CONTROL PANEL

4 Paper Size: Select your output paper size from A4, A3, B4, Letter, or Legal.
Background Remove: Set Background Remove on to print your document without the background color or off to print your document with the background color. Message Display window: Display current settings. Duplex: Press to start copying your single-sided originals to double-sided output. Reduce/Enlarge: Reduce, enlarge or auto zoom your original document. Press to select the preset ratio: 100%, 115%, 122%, 141%, 200%, 86%, and 50%. Choose your desired ratio or adjust the ratio in 1% increment by the ( ) or ( ) button. Auto zoom: Automatically scale your original document to fit your output paper. Lighter/Darker: Lighten or darken your image. Increase level of brightness or darkness by the ( ) button. Decrease level of brightness or darkness by the ( ) button.

7. 8. 9.

Menu: Configure copying features including Printer Select, Input Tray, Output Bin, Offset Stacking, Staple, Hole Punch, Collate, and End Job Mode. : Go to the previous item displayed in the Message Display window or increase the value of the numeric entries. : Go to the next item displayed in the Message Display window or decrease the value of the numeric entries.
10. Normal/Quality: Select your Copy quality: Normal (300 dpi), or Quality (600 dpi). 11. Auto/Text/Photo: Press to respectively concentrate on photo, text, or auto copying. 12. All Clear: Clear your current settings and return to the default settings. 13. Select: Press to select your desired setting. (A star sign, "*", will appear to indicate the selection is done.) 14. Copy Count: Choose the number of copies from 1 to 99. Increase the value of the numeric entries by the ( ) button or decrease the value by the ( ) button. 15. Power/Copy LED: The LED indicator turns green when power is on and turns flashing during copying. 16. Copy: Press to start copy.

Tips: To use other settings than the one displayed in the Message Display window, simply repress the button of that setting to select other options. (For example, when you choose paper size with the Paper Size button, if the Message Display window shows A4 and you prefer Letter, you can just press the Paper Size button again until Letter is displayed.) Note: (1). An item message in the Message Display Windows ending with a means the last setting. (2). The default settings are: A4 Size, Normal Print Quality, 100% ratio, 1 copy.
IMPORTANT! PRINTER MEMORY To make good use of SC-110, it is recommended to install at least 4 MB of memory in your printer. If you want to print your document using Quality mode - 600 dpi as your Copy Quality mode, you need more RAM for your printer as using this feature requires more processing time and memory. See the following chart for printer memory recommendations. It is strongly recommended that you refer to the following table to ensure a successful color copy.
Copy Quality Normal Quality Document Size Letter Size Legal Size Letter Size Legal Size Minimum Memory 1MB 2MB 4MB 6MB Recommended Memory 4MB 8 MB 16MB 20MB
If there is not enough memory in your printer, you may probably encounter either the printer does not print or the print quality is bad.

3.2 BEFORE MAKING COPIES

Customizing paper size:
The SC-110 provides five output paper sizes, A3, A4, B4, letter, and legal. The flatbed and the ADF will support up to legal size paper. Check or select the paper size to match your paper supply to ensure smooth operations. To check or select paper size, 1. Press Paper Size button. The Message window will display your current default setting, such as A4*. If your current paper supply is the same as your default setting, you can skip the following steps. Otherwise, continue with the following steps. Keep on pressing the or button until the desired paper size appears. When the desired paper size message is shown in Message Display window, press the Select button and a * sign will appear on the right-hand side of the displayed paper size. For example: Suppose you want Legal size to be the current setting. Press the Paper Size button, and then or button until the size Legal appears in Message Display window. Press the Select button and a * sign will appear on the right-hand side of the word Legal. Note: Each time when you press All Clear button or power off the SC-110, the SC110 automatically returns to the factory default setting. As a result, you have to change any setting that you have customized to your environment after pressing the All Clear button.
Customizing copying features: SC-110 supports a variety of copying features to meet many copying purposes. Specifying a printer model is required before customizing copying features. To specify a printer model, 1. Press Menu button to display the first copying feature, Printer Select. or button to respectively display printer

2. Press Select and then models included. 3.
Press Select button once again to specify one of printer models, connected to SC-110. An asterisk will appear next to the printer model name. Note: If the printer model connected to SC-110 is not any of QMS Print or PageWork systems currently supported, specify PCL Emulation.This is a generic printer model that will work with most laser printers that support the PCL Emulation. However, you may lose the ability to select other options.
The following steps depict the procedures of how to configure all other copying-feature combinations after a printer model is specified. 1. Press Menu and then the feature. Press Select. Press the Select. or or button to display the desired copy
button until the desired option is displayed. Press
Repeat step 1 to 2 to set up the other desired copy-feature preference options.
The following table includes available copying-feature preference options of all printer models supported. As for the detailed direction of copying features, please refer to respective printer user manuals.
Printer Feature Input Tray QMS 2060 QMS 4060 QMS 2560 QMS 3260 PageWork PCL /4032 /Pro 18 Emulation Multipurpose Multipurpose Multipurpose Main Upper Tray 2 Optional 1 Lower Tray 3 Optional 2 Envelope N/A Optional 3 Optional 5 LCC Optional 6 Optional 7 Top Bin Upper Finisher Bin Face-Up Bin 1 Top Stack Bin 2 Center Bin 3 Stack Bin 4 Bottom N/A N/A Bin 5 Stack Bin 6 Bin 7 Bin 8 Bin 9 Bin 10 Off Off Off Long On Long Not Short Tumble Short Available Off On Off On Off On Off Front Corner Back Corner Center N/A Off On None QMS EOD HP EOD
Multipurpose Upper Upper Middle Optional Lower Optional

Output Bin

Upper Face-up Stack N/A Facedown Stack
Duplex (Button on control panel) Offset Stacking Staple

Off On Tumble

Off On Tumble Off On
N/A Hole Punch Collate End Job Mode N/A Off On None QMS EOD HP EOD
N/A N/A Off On None QMS EOD HP EOD Off On Off On N/A

N/A N/A Off On N/A

N/A N/A N/A
Note: The default preference options are bolded.
Quick Note of copy-feature terms:
1. Duplex button: Double-sided copying is available when the original is fed only through ADF of SC-110. Off Long/On single-sided copying double-sided copying: The reverse-page content starts being copied from the left edge. double-sided copying: The reverse-page content starts being copied from the top edge.

Short/Tumble

Offset Stacking: If the output bin selected supports offset stacking, then the output jobs will be offset from each other when enabled. Off On Copying jobs stack normally. Each copying job is offset in an output bin.

Staple: If the output bin selected supports stapling of jobs, the enabled job will be stapled when the original is fed only through ADF of SC-110. None Front Corner Back Corner Center Pages are not stapled. Pages are stapled at the front corner. Pages are stapled at the back corner. Pages are stapled at two points in the center.
Hole Punch: If the output bin selected supports hole punch, the job will be hole-punched if enabled. Off On Pages are not punched. Pages are punched.
5. Collate: Multiple pages can be copied either as complete sets in numeric order or as separate sheets. Off On 6. Pages are not collated. Pages are collated.
End Job Mode: This printer mode enables the printer to identify the end of each job to ensure correct printing respectively. None QMS EOD HP EOD No End Job Mode QMS -formatted End Job Mode HP -formatted End Job Mode
Note: The type of End Job Mode set on SC-110 must match that on QMS Print System. 7. Input Tray: This printer mode selects the input tray to pull paper from. Refer to the chart on page 11for your particular printer type and options. Output Tray: This printer mode selects the output tray to push paper to after printing. Refer to the chart on page 11for your particular printer type and options.
3.3 MAKING SIMPLE COPIES VIA THE FLATBED The Operating Steps: 1. 2. 3. Place your original face down on the document glass. Press the Copy button. The Message window displays Copy and the Ready LED will flash. Within a few seconds, the copying is done. The Message window then displays 1 Copy @100% and the Ready LED is now steadily on until next task.
3.4 MAKING COPIES WITH COPY FEATURES
3.4.1 REMOVING ORIGINAL BACKGROUND If your original comes with color background, you can remove the background to sharpen your text. The Operating Steps 1. 2. 3. Place your document face down on the document glass. Press the Background remove button. The Message window displays Background remove on. Press the Copy button. The printout shows the background is removed and the text becomes clearer and sharper.
Before Background remove on
After Background remove on

3-10 -

3.4.2 ENLARGING OR REDUCING YOUR ORIGINAL Like a normal copier, the SC-110 also features auto enlargement/reduction function to resize your original. The Operating Steps: 1. 2. 3. Place your document face-down on the document glass. Press the Reduce/Enlarge button, the Message Window displays Ratio:100%. Repress the button to see more options. For example, if you need 150% enlargement, select 141% then press the s button to increase the percentage to 150 in 1% increment. Press the Copy button. And then the printout shows enlargement of 150% of your original.

Ratio:100% Note:

Ratio: 150%
Another option to reduce your original is to firstly repeat the enlargement or reduction steps 1 to 3 and then press the t button to decrease the percentage in 1% increment. The maximum magnification rate is 400% while the minimum reduction rate is 25%. The largest magnified size is Legal when paper size is set to A3 or B4 with a 100% or greater ratio.

INSTALLATION PROCEDURE Installation procedures of SC-110 driver are as follows: 1. Start Windows 98, Windows 95, or NT 2. Insert the SC-110 Utilities CDROM into your CDROM drive.
Note: On some computer systems, the CD-ROM will automatically launch. If this happens, choose to install the software utilities and driver from the main menu.
3. Press the Start button, choose RUN, type d:\driver\SC-110.exe
(where d: is the CD-ROM drive in use), and then click OK. 4. Follow the on-screen instructions to complete the installation.
UNINSTALLING THE SC-110 DRIVER You can uninstall the SC-110 driver by selecting Start>Programs>SC-110 and clicking the Uninstall driver icon from SC-110 group.
5. SCANNER OPERATION & DOCUMENT PRINTING
Scanning Images from within an Application (TWAIN)
Open your image-editing application and choose Select Source from the File menu. If the Select Source menu options are not available from the File menu, see the user guide of your application to learn how the TWAIN link is used. A dialog box appears containing the different TWAIN sources that you can choose to bring an image into your application. Select SC-110 /32 Vx.xx as the source.
When you have used the dialog box to select a different source, you will need to select SC-110 as the source again before you can reuse the SC-110. Place the image to be scanned face down on the glass. From the File menu, select Acquire. The TWAIN user interface will pop up on the screen. Click on the Preview or Scan button to get the image.

5. 6. 7.

The TWAIN user interface:
IMAGE TYPE The SC-110 provides five image types as explained below:
Gray Halftone Error Diffusion Lineart Scanning Source
Scanning Source Two scanning sources are provided- flatbed as well as automatic document feeder(ADF). Line art Line art presents the image in black and white only and there are no intermediate shades of gray in between. Halftone In addition to the black and white display, Halftone can present a somehow gray shade of image by using different size of dots. Error Diffusion While taking up but a minimum storage space, error diffusion gives good image texture and excellent image details.
Gray (Internal 4096 levels of gray scale) 12-bit Gray presents a 4096 shades of gray in an image. Color (Internal 68.7 billion colors) The 36-bit True Color internally presents 68.7 billioncolor levels with much more tonal range and colorimage details.

SCANNING PARAMETERS & IMAGE CONTROL
Resolution Brightness Contrast

Resolution:

The number of dpi (dots per inch) that the SC-110 uses for a scan. Usually the greater the number, the higher the resolution. Yet up to a certain level, the resolution will not be visually increased but the disk space will be increased. Adjusts the lightness or darkness of an image. The higher the value, the brighter the image. Adjusts the range between the darkest and the lightest shades in the image. The higher the contrast, the bigger the different gray scales.

Brightness: Contrast:

Auto Level Auto Crop Descreen Color Matching Reset
Invert Advance Settings Quality Mode Speed Mode Measurement Unit Set Gamma Value Image Information

Auto Level: Auto Area:

Optimizes the scanned image. Automatically sets the whole document as the scan area, no matter what its size. Eliminates the Moire patterns commonly found in printed matter.

Descreen:

Before descreen

After descreen

Color Matching: Adjusts the color quality of the image to make it close to the original. This function uses default parameters to adjust the image. Reset: Invert: Resets the scanning parameters you set. The invert command reverses the brightness and the color in the image. For color images, each pixel will be changed into its complementary color at the command of Invert.
Advance Settings: The Advance Settings provide several functions such as Dynamic Background Removal and Color Drop-out.These functions are briefly explained as below: 1). DBR (Dynamic Background Removal) - Apply exclusively when you need to scan as an Lineart image. The DBR function incorporates a few enhanced options to allow you to remove background color to sharpen your text or drawing. Original(Color picture) After applying DBR option
2). Color drop-out - Apply exclusively when you need to scan as a black and white image.
The Color drop-out function allows you to remove one of the R(Red), G(Green), or B(Blue) color or to convert all the color data into Neutral Gray. For example, if you want to remove the text or background in blue color, simply check the Blue Channel then the text or background in blue color will be removed. On the other hand, if your original contains various color data, then check the Neutral Gray to retain all the color data in gray since removing either one of the red, green, or blue color will inadvertently affect the rest color data as every color contains different elements of each of the red, green, and blue channel. See the result below: Your original background with blue color After click the B(Blue) channel
Your original with red watermark
After click the R(Red) channel
Quality/Speed Mode: Users can select the mode to perform scanning according to their own need. Select quality mode scanning if your emphasis is on the quality of the scanned image. Or you can select speed mode scanning if you want to speed up the scanning process. Pixel/Inch/Cm: Represents the different measuring systems to be used in each scan. Set Gamma: Adjusts the midtone of the image yet without losing details of the lightest and the darkest areas at the same time.

The scanning speed of my SC-110 is much slower than that of those installed at other computers. Can I speed it up?

Answer:

Set you PC printer port to the EPP mode from BIOS setting.
Why does my SC-110 scan at a very low speed? If you have installed Works for Windows, it will install Window Printing System (WPS) in your WIN.INI file. This will take up the printer port time remarkably. You can remove the WPS from your WIN.INI file, as follows:
From: [MS Text Converters] MSWorksWin=Works for Windows 2.0,C:\WINDOWS\MSAPPS\TEXTCONV\worksdos.cnv, wps Works for Dos 2.0=Works for DOS 2.0 MSAPPS\TEXTCONV\workswin.con,wps To: [MS Text Converters] MSWorksWin=Works for Windows 2.0,C:\WINDOWS\MSAPPS\TEXTCONV\worksdos.cnv Works for DOS 2.0=Works for DOS 2.0, C:\WINDOWS\MSAPPS\TEXTCONV\workswin.con Question: Answer: The printer does not print the documents. Why? Pass-through printing may pose a problem for some printers. It is suggested to add a second printer card for printing purpose, or you may call your authorized local dealer for further support. Question: Answer: Does it take long for the SC-110 to initialize itself ? If your printer port supports SPP mode only, it takes about two minutes for the SC-110 to initialize itself. If your printer port supports EPP mode, the initialization speed is much faster, about 20 seconds.
Why sometimes pass-through printing does not work at all? It may be that you fail to power on the SC-110. When doing pass-through printing, please be sure to power on the SC-110. Else, without power, the SC110 can not transfer the printing data/signals to the printer.
Why do some parallel port devices not work with the SC-110? The SC-110 does pass-through printing , but the pass-through printing may not work if you connect the parallel port with devices other than printer. Therefore, if you would like to connect some parallel port devices other than printer, please do not connect them to the same parallel port that the SC-110 currently uses. It is suggested to use other parallel ports to connect these devices or keypro. For instance, you can connect the SC-110 to LPT1, and connect other parallel port devices to LPT2. Or you can add a data switch to avoid the problem.

TECHNICAL SERVICE Technical support for the SC-110 is provided at authorized resellers and the QMS Customer Response Center. Before you contact us, please prepare the following information for a quick solution: Scanner serial & revision number (located on the bottom of the scanner); Hardware configuration (e.g., your host CPU type, RAM size, free disk space, display card, interface card); The name and version of your scanning software application; The version of your scanner driver. The brand and model name of your printer.

QMS, Inc.

1 Magnum Pass Mobile, AL 36618 Phone: 334-633-4300 Fax: 334-633-4866

Corporate

Product Information QMS Technical Support
Phone: 800-523-2696 Email: info@qms.com Phone: 877-778-2687 Fax: 334-633-3716 support@qms.com 800-858-1597 800-762-8894
QMS Service Dispatch: Contacts:
QMS EMEA QMS Australia QMS Canada QMS France QMS Germany and Austria QMS Italy QMS Sweden, Finland, Norway, and Denmark QMS Republic of South Africa QMS United Kingdom and Ireland QMS Netherlands and all unlisted countries Internet http://www.qms.nl (+61) 2-9884-9966 800-268-0343 (+33) 01-393 (+49) 0 (+39) 052-(+46) 8-30 (+27)011-(+44) 1784-442255 (+31) 346-551333

QMS Japan

General Contact Fax Internet
(+81)03-3779-9605 (+81)03-3779-9655 http://www.qmsj.co.jp

SPECIFICATIONS

Copier specifications without ADF:

Copy Resolution

Normal: 300x300dpi Quality: 600x600dpi Max. 8.5"x 14.0" (Legal size) Zooming from 25%~400% Auto Zooming Auto Background Removal Auto Photo, Text Separation PCL, QMS 2060/4060/2560 QMS 3260/4032, PageWork/Pro 18 IEEE 1284 (bi-directional) ECP/SPP 100 - 240V, 50 - 60 Hz < 20 W 476 x 356 x 91mm (18.7 x 14 x 3.6) 4 kg (8.8 lbs)

Copy Area Copy Features

Printer Model Supported

Printer Interface

Power Source Power Consumption Physical Dimension Weight:
Scanner specifications: Scanner Type Resolution Enhanced Resolution Scan Speed Flatbed Scanner 300 x 600 dpi 9600x9600 dpi 6 PPM /10 PPM(with ADF) at 300dpi, Lineart Color Charged-Coupled Device Cold Cathode Fluorescent Lamp
Scan Method Light Source (CCFL) Scan Area Image Types

Max. 8.5"x 14.0" (Legal size) 36-bit color(internal) 12-bit gray(internal) 1-bit Lineart, Dither Error Diffusion IEEE 1284 (bi-directional) ECP/EPP/SPP

PC Interface

9. SC-110 AUTOMATIC DOCUMENT FEEDE (ADF) USERS GUIDE
The SC-110 Automatic Document Feeder (ADF) is a very convenient addition to your SC-110. With the ADF, you can automatically copy or scan up to 25 pages at a time.

9.1 INSTALLING THE ADF

9.1.1 UNPACKING THE ADF 1. ADF Document Cover 2. ADF Paper Tray 3. ADF Paper Support
9.1.2 INSTALLING THE ADF 1. 2. 3. Turn off your SC-110. Disconnect the power cable, and lock the scanning unit. Remove the document cover by opening the cover and lifting the studs from the hinge holes at the rear of the SC-110.

Document Cover Studs

Note: Please store the document cover on a flat surface in a safe place. 4. Hold the ADF document cover and insert its studs to the hinge holes at the rear of the SC-110.

ADF Cover

Insert the notched corners of the ADF Paper Support to the clipjoints on the ADF Paper Tray.

Paper Tray Paper Support

Insert the notched corners of the ADF Paper Tray into the clipjoints on the ADF document cover.
9.1.3 UNLOCKING THE SC-110 Slide the Lock Switch on the bottom of the SC-110 to unlock the scanning unit.
9.1.4 CONNECTING THE CABLES 9.1.4.1 CONNECTING SC-110 TO WORK AS A COPIER Connect the ADF cable, the power cable, and the printer cable respectively.

ADF Cable

To Printer

To Power Outlet

9.1.4.2 CONNECTING SC-110 TO WORK AS A SCANNER/COPIER Connect the ADF cable, the power cable, the SC-110 parallel cable, and the printer cable respectively.
SC-110 Parallel Cable Printer Cable To Printer

To PC Parallel Port

9.2 USING THE ADF
9.2.1 BEFORE YOU BEGIN Standard paper should feed easily. To prevent occasional paper jams when automatically feeding multi-page documents, fan the paper before loading.
Paper which can not be properly fed by the ADF:
Paper with clip or staple attached; Paper with ink not totally dry; Paper with inconsistent thickness, such as envelopes; Paper with wrinkles, curls, folds or tears; Coated paper; Carbonless paper; Paper narrower than 4.5" or wider than 8.5"; Shorter than 5 or longer than 14 Paper thinner than 0.07mm; thicker than 0.15mm Items other than papers, such as cloth, metal or OHP film; Notched paper; Paper with an odd (non-rectangular) shape;
Please use the flatbed to copy or scan documents that cannot be fed by the ADF.
9.2.2 LOADING THE PAPER Place your document with the text face up and make the top of the page to the left side as shown below.

9.2.4.2 SCANNING A SINGLE PAGE To scan a single page, you can place your document either on the ADF Paper Tray or on the document glass(recommended). To scan a single page through flatbed, please do the following: 1. 2. Raise the ADF document cover. Place the page on the document glass. Observe that the top edge of your original near the document alignment as marked by a triangle.

Your Original 3. 4. 5.

6. 7. 8.
Close the ADF document cover. Start your image editing application by clicking the Start button on the task bar and select the name of the application. Choose Acquire from the File menu and click Select TWAIN Source, for example, please select SC-110 V.X.xx. (The command to open the TWAIN source may vary due to different applications. Please refer to the user manual of your TWAIN application.) In a minute, the TWAIN window will be displayed. Select Flatbed source at the top of the TWAIN window. Press the Preview button to get an initial scanned image at a low resolution image to allocate your selected scan area. Finally press the Scan button on the bottom of TWAIN window or the Scan button on the Control Panel.

9.3 MAINTAINING THE ADF

9.3.1 CLEANING THE ADF The SC-110 is designed to be maintenance free. However, it still needs to be cleaned occasionally to ensure optimum image quality and performance. From time to time the pad assembly and feeding rollers may become contaminated with ink, toner particles or paper dust. In this case the SC-110 may not feed documents smoothly. If this occurs please follow the cleaning procedures to return your Scanner to its original state. The cleaning procedures: 1. 2. Moisten a cotton swab with isoprophyl alcohol (95%). Gently open the ADF front cover. Wipe the feeding rollers by moving the swab from side to side. Rotate the rollers forward with your finger and repeat the above cleaning procedures until the rollers are clean. Be careful not to snag or damage the pick springs. Wipe the pad in the direction from top to bottom. Be careful not to hook the pick springs.
4. Close the ADF unit. Your Scanner is now ready for use.

Feeding Roller

ADF Pad
9.3.2 REPLACING THE ADF SNAP-IN PAD MODULE After scanning approximately 20,000 pages through the ADF, the pad may be worn out and you may experience problems with document feeding. In this case, it is highly recommended to replace the pad module with a new one. For ordering the pad module, please consult your nearest dealer and follow the procedure below to replace it. Disassembling Procedure 1. 2. Gently open the ADF front cover to the left. Press both arms of the ADF snap-in pad module inwardly with your two fingers to pull out the ADF snap-in pad module.
Assembling Procedure 1. 2. Take out the ADF pad module from the box. Press both arms of the ADF snap-in pad module inwardly with your two fingers Place it into the holes until it snaps into place.
9.4 HOW TO CLEAR THE PAPER JAM
In the event of a paper jam, follow the procedures below to remove the paper: 1. 2. 3. 4. Turn the SC-110 off by disconnecting the power cable. Gently open the ADF front cover to the left. Carefully pull the paper out of the ADF unit. Close the ADF front cover. 110 is now ready to use.
5. Turn on the SC-110 by reconnecting the power cable. Your SC-

9.5 ADF SPECIFICATION

Dimension Weight Speed Paper tray capacity Document size 446 x 294 x 200 mm 1.4 kgs 10 PPM (page per minute) (mono mode) 25 pages Max: Legal size (8.5 x 14) Min: 4.5 x 5.5 Document thickness 0.07~0.15 mm

Filtered silicon reference cell for solar simulator intensity adjustment
For a-Si (amorphous silicon) solar cells / For c-Si (microcrystalline silicon) solar cells Reference PV Cells AK-100 and AK-110 are the result of collaborative research between Konica Minolta and Japans National Institute of Advanced Industrial Science and Technology.
Reference PV Cell AK-100/AK-110
Patent application number (Japan) 2010-131945
Industrys best spectral mismatch performance for high accuracy and high stability!
(Conforms to JIS C 8941:2009) <Structure >
Cover glass Optical filter

AK-100 (For a-Si cells)

Feature

AK-110 (For c-Si cells)

Crystalline Si solar cell
Spectral mismatch reduced to less than 1%
Even on Class C solar simulators for multi-junction cells, the spectral mismatch for tandem solar cells (a-Si / c-Si types) is drastically lower than that of typical reference cells, making current matching of tandem solar cells easier.
Improved reflection characteristics
Error in short-circuit current (Isc) due to multiple reflection is greatly reduced. Improvements in the optical structure suppress multiple reflection and reduce the 1.3% error of conventional products to 0.0%.
Improved durability against solar simulator light
Variations in short-circuit current are low even under continuous irradiation by a solar simulator.

Conventional product

AK-100/AK-110

Calibration

The AK-100/AK-110 can be calibrated as a secondary reference by AIST.

Main specifications

Spectral mismatch error*1 Short-circuit current (Isc) at 251C Receptor area Aperture area FOV FF Temperature sensor Connector for I-V measurement Connector for temperature measurement Operating temperature/humidity range Storage temperature/humidity range Calibration as secondary standard Size (W) (D) (H) Weight Standard accessories AK-100 Within 1% 40 mA or higher mm mm 160 60% or higher PT-100 XLR-type Cannon plug (JIS standard) LEMO connector (WPVS standard) 20 to 30C, relative humidity 65% or less 15 to 30C, relative humidity 30 to 75% with no condensation Calibration by National Institute for Advanced Industrial Science and Technology (AIST; Japan) as secondary reference possible. 21.5 mm 600 g Storage Case PV-A01, M4 screws (4pcs), Connector for I-V Measurement (male) PV-A02, Protection Plate PV-A03 55% or higher Within 1% 10 mA or higher AK-110
*1Spectral mismatch error evaluated according to Konica Minolta standard test conditions. Software for calculating spectral mismatch is available for download from the Konica Minolta Sensing home page. (http://www.konicaminolta.com/instruments/download/software/index.html)

<Dimensions>

(Same for both AK-100 and AK-110; Units: mm)

120 62

<System Example>
Solar simulator Connector for I-V Measurement (female) Connector for I-V Measurement (male) PV-A02
Connector for temperature measurement (LEMO connector) 2000
Protection Plate PV-A03 M4 screws (4pcs) Connector for temperature measurement Reference PV Cell AK-100/AK-110
Connecting Cable Bias power supply
13.2 Cell surface position

Cell (20 mm 20 mm)

Connector for I-V measurement (XLR-type Cannon plug)
Temperature Control Stage

Peltier Controller

Storage Case PV-A01 Commercial product
Temperature Control System for Reference Solar Cells
Recommended system: Temperature Control Stage for Reference Solar Cells PVC-1000 from Cell System Co., Ltd.
Konica Minolta, the Konica Minolta logo and symbol mark, and The essentials of imaging are registered trademarks of Konica Minolta Holdings, Inc. The specifications and appearance shown herein are subject to change without notice.

SAFETY PRECAUTIONS

For correct use and for your safety, be sure to read the instruction manual before using the instrument.
Certificate No : YKA 0937154 Registration Date : March 3, 1995 Certificate No : JQA-E-80027 Registration Date : March 12, 1997
2010 KONICA MINOLTA SENSING, INC.

9242-4898-10 BAMAPK 1