Korg AX10A

Korg , A&T T r a d e. . Korg A&T Trade, A&T Trade , . A&T Trade, Inc.
, - AX10A, Korg A&T Trade. (095) 796-9262; e-mail: synth@attrade.ru

Korg AX10A.

. 3 . 3 . 4 . 6

. 6 . 8

/ . 9 . 9

. 10 . 11 . 11 . 12

. 13 PRE FX. 13 TONE. 13 NOTCH. 13 MIC&BODY. 14 AMB&CHORUS. 14 . 14 NR (). 15

. 15 . 16

(). 16 . 16

. 17 . 17 AX10A. 18

AX10A Tone Works. , . REMS 3 -, , 11 /, 11 , 1 .

AX10A

INPUT PRE FX

MIC&BODY

11 AMBI + CHORUS

AMBIENCE/CHORUS

OUTPUT
/ AX10A . . / . , ( ). 40 AX10A , 40 . //. , . , .

, : ; ; ; ; .

, .

, - .

. .

. .

, .
. , . . , , . Korg , .
, B 15 FCC. . , , , . , . - ( ), : . . , , . . .
CE Korg, , EMC Directive (89/336/EEC) CE mark Directive (93/68/EEC). , , Low Voltage Directive (73/23/EEC). CE Korg, , , EMC Directive (89/336/EEC) CE mark Directive (93/68/EEC).
KORG . KORG . KORG, , /. .
REMS ( - ) KORG : , , , , , .
- , . 1. AX10A , 4 AA ( ). AX10A , DC9V ( ). 2. INPUT L/H . H , L .
3. INPUT AX10A. , AX10A. 4. AX10A PA -, AMP/LINE AMP. , , LINE. 5. OUTPUT AX10A INPUT . , OUTPUT. 6. . MASTER AX10A. 7. . AX10A 40 (0194) 40 (0.19.4). , . 8. . PEDAL . , . .
9. MIC & BODY , DEPTH . . , NOTCH .
10. . AMB (CHORUS) . FUNCTION AMB (CHORUS) . 00 . / TAP . 11. -, Mic & Body, PRE FX VALUE . AX10A. AX10A, .
. , , Notch, . . , . AX10A , .

2. NOTCH . . 3.

AX10A. LEVEL/NR FUNCTION, (NR). . , LEVEL/NR ( MASTER).

4. PRE FX (TUNER)

-. -. , .

5. PRE FX

, - COMP -> LIMITER -> EXCITER -> COMP .
6. VALUE (CALIB) -ON/OFF -. / PRE FX VALUE. , (CALIB).

7. MIC & BODY

11 .
8. DEPTH (VOL PEDAL MIN) -ON/OFF (DEPTH). , FUNCTION VOL PEDAL MIN. / MIC & BODY DEPTH. , MIC & BODY .

9. AMBIENCE

11 .
10. AMB/CHORUS -ON/OFF . FUNCTION . / AMB. , , AMB (CHORUS) 00.

11. TAP

. .

12. FUNCTION

, , .

13. MASTER (CANCEL)

AX10A (MASTER). AX10A (), (CANCEL).

14. WRITE

(). , AX10A ; , ().

15. PEDAL FX/BANK HOLD

, ( ). , , . ORG: NOTCH (): . RED: CHO (): GRN: AMB (): , AMBIENCE OFF: VOLUME ( ): FUNCTION (BANK HOLD).
. / . / VOLUME NOTCH.

().

19. DOWN/BANK DOWN, UP/BANK UP -BYPASS, TUNE . 3 . UP DOWN, , (BYPASS).

20. - INPUT L/H

. H: L:

21. INPUT

. 1/4. AX10A , . AX10A , 1/4.

22. OUTPUT

, .

23. - AMP/LINE

AMP PA . LINE , .

24. DC9V

. , . .

/ .

1. , , , . 4 AA ( ) . 2. , INPUT. . INPUT. , INPUT, AX10A . . , . . , . AX10A .
1. DC 9V, . POWER, . . AC AX10A. . , .
1. . 2. INPUT L/H . H: . L: . 3. INPUT. 4. AMP/LINE AMP PA LINE , . 5. OUTPUT , . OUTPUT (TRS), (L). , . - . 6. , . MASTER AX10A. AX10A , INPUT L/H H. , .
, . RCA 1/4" INPUT AMP/LINE LINE
1/4" 1/4" 1/4" x 2 1/4" AMP/LINE AMP
1/4" 1/4" - OUTPUT
1/4" 1/4" INPUT L/H
, . AX10A 40 40 . 10 (09) 10 (0.9.), 4 .

: 0.~9. : 1~4

1. UP DOWN.9.4+ 01+ 02+ 03+ 04+ 11+.+ 93+ 94+ 0.1.
1. FUNCTION PEDAL FX (BANK HOLD) . . 2. UP DOWN. ; .H4+ H1+ H2+ H3+ H4+ H1+ H2. 3. , FUNCTION PEDAL FX (BANK HOLD).

c: ( )

1. FUNCTION UP (BANK UP) DOWN (BANK DOWN). . . , 1:.11+ 21+ 31+ 41+.+ 91+ 0.1+.+ 9.1.
AX10A, . AX10A, . 1. UP DOWN. Bypass: UP DOWN . Mute: UP DOWN, ; . UP DOWN, , . , . , . 2. , UP DOWN.

AX10A. UP DOWN. . .
1. UP DOWN AX10A (. ). 2. , . . (#).
. 3. . 4. PRE FX (TUNER).

5. , UP DOWN .

, A 440. . 1. , VALUE (CALIB) . : 438 445. , (., ). AX10A .
, , . 11 AMBIENCE, CHORUS, NOTCH 1. , ( PEDAL ). , . , , ( ). NOTCH, / . 2. . . PEDAL FX NOTCH, , . , . . , , . PEDAL FX , . .
/ . , . BASS, MID FC, MIDDLE TREBLE, VALUE, DEPTH TAP . , MIC & BODY TYPE. , PRE FX AMB & CHORUS . / , VALUE DEPTH. / BASS, MID FC, MIDDLE, TREBLE LEVEL. /, . AMB & CHORUS, MIC & BODY. DEPTH AMB & CHORUS . DEPTH . , FUNCTION DEPTH . / TAP . PRE FX, MIC & BODY. PRE FX . PRE FX VALUE . AMB & CHORUS. PEDAL FX . ( ) . , . FUNCTION, NR ( ) . , , . , , . . , VOLUME.

PRE FX

PRE FX -, VALUE .
COMP LIMITER EX CITER (*1) "" 0-30 0-30 0-30

TONE (*1)

. FUNCTION LEVEL (NR).
BASS MID FC MIDDLE TREBLE LE VEL NR 00-30 170 3 (1-10). 00-30 00-30 00-30
. . , . , . PEDAL FX NOTCH, .

FREQUENCY . .

MIC&BODY (*1)
MIC & BODY , DEPTH the DEPTH.
C-MIC M-LAR GE M-SMALL G-LARGE G-SMALL T-LAR GE DRY LIGHT NYL ON STEEL RESO . . . . . "". . "". . . "". - . DEPTH .: 0 () -30 ()

AMB&CHORUS

AMBIENCE , AMB AMB. TAP . , FUNCTION, AMB. AMBIENCE CHORUS . AMBIENCE CHORUS, 0. PEDAL FX AMB CHO, .
SLAP ECHO1 ECHO2 ECHO3 PP DLY MUL TI AIR ROOM HALL PLATE SPRING 1/4 TAP. ( ) ( ) ( ) "-" "" (*3) (*3) (*3) TAP 250 [] Normal AMB PEDAL FX:AMB PEDAL AMB

1.0 [] 0-30

(*2) 4.0 [] 8.0 []
(*1) . , . (*2) . (*3) TAP.
CHOR US - Normal CHOR US PEDAL FX:CHO PEDAL CHOR US

0-30

PEDAL FX , ( ). , , . ORG: NOTCH (): . RED: CHO (): GRN: AMB (): , AMBIENCE OFF: VOLUME ( ):
/ PEDAL FX. , . PEDAL FX VOLUME NOTCH, .
PEDAL FX VOLUME, FUNCTION, MIC & BODY DEPTH (VOL PEDAL MIN).
PEDAL FX AMB, CHO VOLUME, , . . , PEDAL FX NOTCH, , .
, FUNCTION LEVEL (NR). , NR . , .
40 (0.19.4). , . , . 1. WRITE. , AX10A . 2. . (0194). 3. WRITE . , MASTER (CANCEL) ( ). .
, , , . , . 1. FUNCTION PEDAL FX, . 2. . PEDAL FX. .

3. 2.

MASTER (CANCEL), . 3. . PEDAL FX. , , . . , PEDAL FX VOLUME, VOL PEDAL MIN 0 . ,

( ). , . .

1. WRITE, . .
MASTER (CANCEL). 2. , , WRITE. (0.19.4). , , .

AX10A , . , .

. . INPUT .
. . . - AX10A. AX10A. . AX10A.

AX10A . .

( Er)

. .

/: 11 : 3 -, , 11 , , , : 40 (10 x 4 ) 40 (10 x 4 ) : ( 1/4) : / ( 1/4) : : 27.5 1318.5 (A0 E6) : A = : 4 (18 , ) (9 ) : 287 , 182 , 60 : 1.1 ( ) : : * .
MIC&BOD Y T YPE MIC&BOD Y DEPTH AMB T YPE C-MIC 30 HALL M-LAR GE 26 PLA T E G-SMALL 30 AIR T-LAR GE 30 ECHO1 G-LAR GE LIGHT DRY STEEL M-LAR GE NYL ON M-SMALL C-MIC T-LAR GE G-SMALL OFF RESO G-LAR GE DRY NYL ON LIGHT C-MIC NYL ON M-LAR GE T-LAR GE M-SMALL OFF RESO C-MIC M-SMALL STEEL T-LAR GE G-SMALL G-LAR GE LIGHT RESO M-LAR GE OFF STEEL LIGHT NYL ON --PLA TE ECHO3 SPRING SPRING OFF AIR PP DLY SPRING ECHO2 MUL TI OFF AIR ECHO3 SPRING MUL TI HALL OFF OFF ECHO3 HALL ---21 -19 SLAP OFF HALL HALL 20 -245[ms] 2.9[s] 3.0[s] 640[ms] 3.2[s] 3.0[s] 640[ms] 2.1[s] 1.0[s] 4 00[ms] 3.2[s] 520[ms] 520[ms] 540[ms] 2.6[s] 180[ms] 3.0[s] -30 AIR OFF SPRING ROOM 16 -2.6[s] 4.0[s] 19 ------0 -5 -23 AIR ROOM AIR ROOM 0.6[s] 0.6[s] VOL V OL AMB VOL V OL V OL CHO AMB AMB V OL V OL AMB V OL V OL AMB AMB CHO AMB AMB V OL V OL VOL AMB V OL AMB AMB V OL VOL AMB AMB V OL AMB PLA T E ECHO3 PLA TE AIR 3.0[s] 500[ms] 3.0[s] --AMB AMB CHO CHO -----0 ---------0 -0 ----0 -AMB DEPTH TA P 3.0[s] 6.4[s] 420[ms] CHORUS -19 PEDAL FX AMB AMB CHO VOL V OL PEDAL MIN ---0 NR 22 21

Prog 03 04

PRE FX VAL UE NOTCH COMP COMP COMP OFF -0

BASS 22 15

MID FC MIDDLE TREBLE LEVEL 12 30

LIMITER OFF OFF LIMITER

12 --15

OFF OFF COMP LIMITER

--16 16

LIMITER OFF LIMITER COMP

18 -10 12
LIMITER LIMITER LIMITER COMP

--25 18

OFF LIMITER LIMITER COMP
OFF LIMITER LIMITER EXCITER

LIMITER EXCITER OFF COMP

LIMITER LIMITER COMP OFF

* , 1 4.

EasyStart
Accurately-crafted Guitar Amp, Cabinet and Effect sounds using Korgs REMS modeling technology 11 classic amp models 26 effects including 3 types of pre-effects: Compression, Wah and Acoustic / 3- band EQ plus 11 Modulation effects / 11 Ambience effects 80 Programs: 40 presets and 40 user 3 effects plus Noise Reduction can be used simultaneously, in addition to Amp type Knob interface for quick and easy operation Tap switch for easy setting of delay time and other functions Program select foot switches Expression pedal to control volume and effects including Wah, Chorus, Flanger Built in auto-chromatic tuner w/mute function Headphone connector Battery or AC-powered
For the Electric Bass: Accurately-crafted Amp, Cabinet and Effect sounds using Korgs REMS modeling technology 11 classic amp models 26 Effects including 3 types of pre-effects: Compressor, Distortion, Octave / 3-band EQ plus 11 Modulation / 11 Ambience effects 80 Programs: 40 presets and 40 user 3 effects plus Noise Reduction can be used simultaneously in addition to Amp choice Knob interface for quick and easy operation Tap switch for easy setting of delay time and other functions Program select foot switches Expression pedal to control volume and effects including Chorus & Flanger Built in auto-chromatic tuner w/mute function Headphone connector Battery or AC-powered
Multi-effect Acoustic Guitar Modeling processor. Accurately reproduces the rich, subtle sound of many famous acoustic guitars, using Korgs REMS modeling technology 10 Body models and a mic effect to perfectly simulate body resonances of new and vintage acoustic guitars. A mic effect to simulate using an acoustic guitar with a condenser microphone 17 effects including 3- Pre effects: Compressor, Limiter, Exciter, plus 11 Ambience effects, Chorus, Notch Filter, and Noise Reduction 80 Programs: 40 presets and 40 user 2 effects can be used simultaneously in addition to Body models /Mic effect, plus Noise Reduction Knob interface for quick and easy operation Program select foot switches Expression pedal for realtime control Built in auto-chromatic tuner w/mute function Headphone connector Battery or AC-powered
AX10-Series EasyStart NOTE: The following procedures work for all 3 of the AX10-series effect units! Audio Connections and Tuning
1. 2. 3. Lower the MASTER level. If connecting headphones or powered monitors, select LINE with the LINE/AMP switch on the rear panel. Select AMP if connecting to a guitar amplifier. If using headphones, mixer, or amplifier, connect to the OUTPUT jack on the rear panel. After making audio output and AC connections, connect your guitar to the INPUT jack on the rear panel. Raise the MASTER level to adjust the volume. Tune up! Step on the program select switches simultaneously, to activate bypass mode, and the auto- chromatic tuner will be active. Play a note and watch the meter to tune your guitar or bass. To return to the previous mode, step on either of the select switches again.
Restoring the Factory Preset Programs
1. 2. While holding down the WRITE button, switch on the power. The display will indicate Ld. Release the WRITE button. Press the WRITE button once again. The factory programs will be loaded into the user area (o.1~9.4). When loading is complete, the display will blink, and then program number 0.1 will appear. Note: If you reload the preset programs, all previously stored programs will be overwritten. Note: Never turn off the power while this operation is in progress.
Selecting and listening to the AX10s Preset Programs
The AX10 pedals each have 80 program locations in 20 banks with 4 programs in each bank (20x4=80). Use the program UP or DOWN select switches to step through the programs of all banks. Once you find a sound that you like, you can use the knobs and selectors of the amp and effects section to tweak the sound easily.

1. 2. 3. 4. To select any of the 3 Pre FX, press both the VALUE UP/DOWN arrow buttons simultaneously (the LED will light). Use the UP or DOWN buttons to select the desired effect. Repeat this procedure to turn the Pre FX off. To select Modulation Effects (AX10G/B), simultaneously press both the DEPTH UP/DOWN Arrow Buttons that correspond to the Modulation Effects. Repeat this procedure to turn the Modulation Effects off. To select the Ambience Effects, simultaneously press both the DEPTH UP/DOWN Arrows. Repeat this procedure to turn the Ambience Effects off. Once the LED corresponding to an Effect section is lit red, (ON), the DEPTH UP/DOWN Arrows will increase or decrease either the amount of Effect or Depth depending on the effect chosen. While holding down the Function button and pressing either the UP/DOWN Arrow buttons that correspond to an effect section, you can edit additional Effect parameters. For example, you can edit the speed of a modulation effect by holding down the Function button, and pressing either of the MODULATION UP/DOWN arrow buttons. 5. 6. TAP BUTTON: You can set the delay or reverb time of the Ambience effect by tapping this button at the desired interval. The LED located at the left will blink to indicate the tempo. To assign the Effects to the Expression pedal, press the FX/BANK HOLD button. Each time you press this button, the LED will change color to indicate the specific pedal Effect that will be controlled. -WAH (orange): Pedal Wah (AX10G and AX10B) (Note: For AX10A, this setting allows you to eliminate feedback by position of the pedal) -MOD (red): The Effect selected by Modulation -AMB (green): The Effect selected by AMBIENCE -VOLUME (unlit): Volume Pedal 7. Using the Pedal to switch the Effects on and off: By advancing the Pedal all the way forward you can switch the selected PEDAL FX Effect on/off. When the Effect is on, the LED at the left of the PEDAL will light. If VOLUME is selected as the PEDAL FX, the LED cannot be turned off.

Saving a Program

Youve tweaked and turned some knobs, and you like the changes that youve made now to save your program:
1. 2. 3. Press the WRITE button, The Program number will blink in the display, and the AX10 will be in write ready mode. Use the Program Select switches to select where you would like to store the program. (You must use USER Programs; you may not store patches in the PRESET Programs). Press the WRITE button once again, and your program will be stored.