Press it to enter playback mode. 13 Mode 14 Menu / Delete 15 Tripod connector 16 Micro SD card slot 17 USB interface Press it to select PHOTO/VIDEO mode. Press it to enter camera setting mode. Press it to delete the photos/videos in playback mode. To fix the camera on tripod (Not included). SD card storage location. Via this connection, you can connect to a computer. Compartment for 2 x AAA batteries.

Zoom indicator

Shows Zoom ratio.
4. Details for camera setting
capture Mode Single / 10s Timer 12M pixel resolution 8.0M pixel resolution 5.0M pixel resolution 3.0M pixel resolution 1.3M pixel resolution VGA resolution Super Fine/Fine/Normal Strong/Normal/Soft 2.0, 5/3, 4/3, 1.0, 2/3, 1/3, 0 Auto Daylight Still White balance Cloudy Tungsten Fluorescent Scene ISO Smile detection Anti-shaking Video Resolution Date/Time Auto power off Beep sound Auto/Landscape/ Backlight/Night scene/Portrait/Sports Auto/50/100/200 On / Off On / Off VGA 640 x 480 QVGA 320 x 240 YY/MM/DD Off / 1Minute / 3 Minutes Off/On German/English/Spanish /Italian/French/ Portuguese/Dutch/Greek /Turkish/Hungarian/ Polish/Russian/Danish/ Swedish/Norwegian/ Finnish Date &Time /Date /Off 50Hz / 60Hz Internal Memory or Micro SD card Cancel / OK Single or 10s timer selection 4032 x x x x x x 480 Picture quality setting Sharpness setting Exposure setting Automatic white balance White balance selected for daylight surrounding White balance selected for cloudy surrounding White balance selected for tungsten lighting White balance selected for fluorescent surrounding Scene setting Sensitivity select Smile detection setting Anti-shaking setting Video resolution set up Date or time setting Auto power off selection Beep sound setting

DC-521 Manual

For information and support, www.lenco.eu

Battery compartment

Resolution
1. Get to know your camera
3M waterproof design 5.0 Mega pixels resolution sensor Digital still camera Digital video camcorder Built-in flash Light 8x digital zoom 2.4" TFT color display Micro SD card support 2x AAA alkaline batteries Smile detection Anti-shaking still capture
3. Explanation of the status icons
Quality Sharpness Exposure

Important note:

-always wash you camera with clear water when coming out of the sea or pool water. -only open the camera (battery or card compartment) when the camera is dry

2. Functional parts

Function

Mode selected

Description Photographs mode. Videos capture mode. Playback VIDEO mode. Playback PICTURE mode Force flash: The flash is on in any environment. Auto flash: The camera determines if the flash should be used or not. No flash: The flash is turned off.

Flash indicator

Self-timer ISO Photo/Video counter Selected resolution
Shows selected Self-timer setting Light Sensitivity setting Setup Photo mode: No. of pictures had been taken. Video mode: Recording time in second. Playback mode: No. of pictures or video file. 12M = 4032x3024; 8M = 3264X2448 5M = 2560x1920; 3M = 2048x1536; 1.3M = 1280x960; VGA = 640x480 Super fine. Fine. Normal. The micro SD card is inserted and will be used as storage for PHOTO and VIDEO Shows Anti-Shaking ON/Off Mode (0.5m infinity). Macro mode (11cm 18cm). The batteries are full. The batteries are empty. Shows selected EV value. Shows selected White-balance mode Shows selected Scene mode ( Landscape/Backlight/Night scene/Portrait/Sports) Shows Smile detection On/Off Language

Select display language

Date stamp Frequency Format Default setting Version
Shutter Power on/off button Strap hook Flash light Lens Busy indicator Macro switch LCD screen Up Down Left / Flash light Right / Playback
Press this button to take photographs or to start /stop recording a video clip, or to confirm changes in menu mode. Press this button to turn on, press again to turn off. Hook for attaching the wrist strap to the camera. Use the built-in flash to give the subject extra lighting if it is in dark surroundingthe best flash distance is recommended within 1.5m). Note: Keep the lens clean. Dirt and fingerprints will affect the quality of the picture. When the indicator is blinking, the camera is busy. Macro mode: Select this mode to take close-up photographs (distance 11cm - 18cm). Normal mode: Select this mode to take photographs from 0.5m - infinity. Menu-mode: Up, Photo/Video/Preview-mode: Digital zoom in. Menu-mode: Down, Photo/Video/Preview-mode: Digital zoom out For LEFT selection in menu mode. For flash light functions selection in photo mode. For RIGHT selection in menu mode.
Picture quality The micro SD card indication Anti-Shaking Normal/Macro mode indicator Battery indicator Exposure value White Balance Scene mode Smile detection
Date stamp Select power frequency in your location Format the memory location selection (All data will be lost!). Default setting See the firmware version
Note: The camera will remain the last setting when it is turned off.

5. Using the camera

5.1 Installing the batteries
1. Open the battery door. 2. Insert 2x AAA alkaline batteries into the camera. 3. Close the battery door.
6. If SMILE detection is ON, shutter will be activate automatically once a smile face is detected Caution: 1) Taking picture for fast-moving object is not recommended. 2) Image may be distorted when taking picture in a moving vehicle.

7. Specifications

Sensor 5.0 Mega pixel CMOS sensor 12.0 Mega pixels: (4032x3024) 8.0 Mega pixels: (3264x2448) 5.0 Mega pixels: (2560x1920) 3.0 Mega pixels: (2048x1536) 1.3 Mega pixels: (1280x960) VGA: (640x480) F/2.8 f = 8.5mm 0.5m. ~ Infinity 11cm 18cm 8x Built-in ( Auto / force / off ) 2.4" TFT color display Auto / Daylight / Cloudy / Fluorescent / Tungsten 30fps@VGA / 30fps@QVGA with micro SD card Supports SD cards up to 8GB Picture: JPEG, Video: AVI 10 seconds USB 2.0 2xAAA alkaline batteries

Zoom in and out

Image resolution
The camera can zoom in up to 8 times. Zoom in or out by pressing the up or down button, a number will appear on the display, 8.x is the maximum zoom ratio.
5.7 5.2 Inserting a memory card (not included)

Self-timer setting

This camera has built-in internal memory. This memory can be extended with a micro SD memory card (not included). Follow the instructions below to insert the optional micro SD memory card into the camera. 1. Turn off the camera first. 2. Open the battery door. 3. Insert the micro SD card into the camera. Note: There is only one right direction to insert the micro SD memory card into the slot. Do not force the card into the memory card-slot, it may damage both the camera and the micro SD memory card. Note: The micro SD memory card must be formatted before taking photographs. See the following sections for more information.

You can use the self-timer function when you take a photograph of yourself or when you take a photograph without flash of an object. To avoid shaking of the camera a tripod is recommended. 1. Set the camera to photo mode. 2. Press the MENU button ( ). The menu will appear. ) button to select Capture Mode and confirm by pressing the SHUTTER 3. Press the W( button. 4. Press the W( ) button to set the delay time: 10S Timer. 5. Press the SHUTTER button to confirm. The self-timer function is now ready for use. 6. Aim at the object you wish to take photo. 7. Press the SHUTTER button to take a photograph. 8. The photo will be taken after the timer reaches the delay time of 10 seconds. The camera will beep during the delay time.
Lens Focus range Macro mode Digital zoom Flash strobe LCD display White balance Video mode External memory card File format Self timer PC interface Power source

Recording video clips

8. System requirement
Operating system CPU RAM Interface CD Windows XP / Vista or above Mac 9.x or X.x Pentium III or above At least 64MB USB port 4x speed CD ROM or above
1. Press the MODE button to select the video clip mode ( ). 2. For setting the resolution, Press MENU ( ) button and select Resolution, then press the SHUTTER button to confirm. Two resolutions will be displayed. VGA (640 x 480), QVGA ( 320 x 240). 3. Press the SHUTTER button to start recording video, press the SHUTTER button again to stop recording. The video clip will now be saved as an AVI file in the camera memory.

Playback photographs

Formatting the memory or micro SD card
1. Press the menu button ( ) in PHOTO or VIDEO mode. 2. Select the setup mode by press the right button. 3. Select the format icon by press the W( ) button and press the SHUTTER button to confirm. 4. Select Internal memory or SD card and confirm with the SHUTTER button.
1. Press the( ) button to get into playback mode. 2. The last picture or video clip taken will be displayed. Use the left or right buttons to flip through the pictures or videos 3. In full screen display, press the T( ) button to zoom in the photo. 4. To view images in thumbnail, press the W( ) button. 5. To shift the image in zoom-in mode, press the SHUTTER button then use the up/down/left/right buttons. 6. Press the MENU ( ) button in Playback mode, press again and hold MENU button until the menu options displayed. Select SLIDE SHOW and select the desired slide show time. Press the SHUTTER button to confirm. The pictures saved in your camera or your micro SD card will be displayed in sequence automatically. To stop slide show, press SHUTTER button again.

9. Troubleshooting

Problem Cannot turn on the camera Cause Low battery power. Battery placed at wrong polarities. The memory card or built-in memory hasnt been formatted properly. Connection failure. Solution Replace or install the battery correctly.
Photos can not be saved when taking pictures.

Format the memory in setup mode of the camera. Please refer to section 5.3. Make sure all cable connections are secured and restart the computer if necessary. Replace with new 2xAAA alkaline batteries. Replace with new 2xAAA alkaline batteries. 1. Hold the camera steadily until it beeps when taking video photo. 2. Clean the lens with soft dry cloth. USB cable 1x Pouch 1x
5.10 Playback video clips
1. When video clips are displayed, press the SHUTTER button to start playing the video and press the SHUTTER button again to pause the playback. 2. Press right button to fast forward or press left button to rewind. 3. Press the down button to stop. 4. Press the mode button to exit.

Setting the resolution

Cannot find removable disk after connecting the camera to the computer. Flash does not work. The batteries used up very fast. The photos are blurry
The camera can be set to different resolutions. 1. Press the menu button ( ) in PHOTO mode, select the resolutions icon by W ( ) key and press the SHUTTER to confirm. Resolutions: VGA (640 x 480), 1.3M (1280 x 960), 3M (2048 x 1536), 5M (2560 x 1920), 8M (3264x2448), 12M (4032 x 3024) 2. Six different resolutions will be displayed. Select the desired resolution by using the up or down buttons and press the SHUTTER button to confirm the selection.
Battery power is too low. Incorrect or old, used up, battery 1. The camera is not held steadily 2. The lens of camera is dirty.
5.11 Delete photographs and video clips
You can delete a single photograph / video clip, or delete all the photographs / video clips in the memory. Follow the instructions below to delete photograph. 1. Press the ( ) button to enter the playback mode. 2. Press left or right button to select photograph/video clip to be delete. 3. Press the MENU/delete button and select Delete This Image(Video) or All. 4. Press the SHUTTER button, then select OK to confirm. 5. Press the mode button to exit. NOTE: Select All and Press the SHUTTER button to confirm, all the pictures and videos will be deleted.

Taking photographs

1. Turn on the camera. 2. Depending on the distance to the object being photographed, use macro switch to adjust the distance. Select the flower symbol ( ) if you wish to take a close-up photograph (11cm 18 cm). If you wish to take a video or a photograph of surroundings or people (0.5m infinity), set the macro switch to normal mode ( ). 3. If you are not sure if there is enough lighting, turn on the automatic flash( ) by pressing the flash button. (If the battery power is too low, the flash wont be activated). 4. Use the LCD screen to aim the object you wish to take photograph. Face detection function will be activated automatically if you take pictures of persons. 5. Press SHUTTER button and wait until the LCD display turn on again.

List of accessories:

Camera 1x User manual 1x Handstrap 1x

6. Connecting to a PC

The unit can be connected to the computer as mass storage device and transfer photo/video files for storage.

DC-MEGA PIXEL WATERPROOF DIGITAL PHOTO CAMERA
5 MEGA PIXEL WATERPROOF DIGITAL PHOTO CAMERA
8 x digital zoom Lens: F=2.8 f=8.5 mm Sensor: CMOS 5.0 mega pixel Waterproof to 3M 12 mega pixels interpolation Resolution: 3264 x 2449 px color 2,4 TFT LCD display Video function (30 fps with QVGA, 30 fps with VGA) Built-in flash Anti-shake technology Smile detection Self-timer: 10 sec File-format: picture: JPEG, video: AVI External memory card: micro-SD card up to 8 GB mini-USB 2.0 high Speed Plug & play: Windows XP/Vista and MAC OS (version 9.x and up)
5 MEGAPIXEL WASSERDICHTE DIGITAL-KAMERA
8 x digitaler Zoom Objektiv: F = 2,8 f = 8,5 mm Sensor: CMOS 5.0 Mega-Pixels Bis 3M wasserdicht 12 Mega Pixel interpoliert Auflsung: 3264 x 2449 px 2,4 Farb-TFT-LCD Video-Modus (30 fps bei QVGA, 30 fps bei VGA) Eingebauter Blitz Anti-Shake technologie Erkennt Lcheln Selbstauslser: 10 Sekunden Dateiformate: foto: JPEG, video: AVI Untersttzt Mikro-SD-Karten mit bis 8 GB (nicht mitgeliefert) mini-USB 2.0 high Speed Plug & play: Windows XP/Vista und MAC OS (version 9.x und hher)
Power source: 2 x AAA batteries Power consumption max/standby: without flash =1W (400mA) / with flash 1.73 W (<720mA, 2sec) Dim. unit: 89 x 27 x 60 mm ( WxDxH) Weight: 116 gr Min. order quantity: 5 pcs. EAN-code: 87.11902.02397.5 (black) EAN-code: 87.11902.02399.9 (pink) EAN-code: 87.11902.02398.2 (blue)
Stromversorgung: 2 x AAA batterien Stromverbrauch max/standby: ohne blitz =1W (400mA) / mit blitz 1.73 W (<720mA, 2sec) Abmessungen: 89 x 27 x 60 mm (LxTxH) Gewicht: 116 gr. Verpackungseinheit: 5 Stck EAN-code: 87.11902.02397.5 (schwarz) EAN-code: 87.11902.02399.9 (rosa) EAN-code: 87.11902.02398.2 (blau)
Subject to changes without prior notice

nderungen vorbehalten

04 10/1