QUICK-GUIDE

DTVR-700

Preparation / installation:
Connect the power (see first image below) Connect the available antenna types (ATV/FM, DVB-T) to the correct antenna input of the unit (see second image below) Insert the batteries into the remote control. When using the unit without adapter please insert rechargeable batteries into the battery compartment. We recomment to use rechargeable batteries only. Please remove the batteries when the unit is not used for a longer period of time, the batteries will last longer. Volume up/down Power on/off Enter (confirm) Setup menu Select DVD/USB/ card mode UP/DOWN/LEFT/RIGHT CH+/CH-/Fav-/Fav+ return
Setup / Basic operation analogue TV:

Press the TV ATV mode

button on the remote control to select
Press the SETUP button on the remote control to enter ATV setup Use the up/down buttons on the remote control to select TV FORMAT , press ENTER to confirm Use the up/down buttons to select your TV format (most european countries use PAL BG) , press ENTER to confirm Press the return button on the remote to return Use the up/down buttons on the remote control to select AUTO SEARCH , press ENTER to confirm, autoscan will start. Once the channels are stored, select the channels with the CH+/CH- buttons

enter enter enter

12V. DC input
Setup / Basic operation DVB-T:
1 Press the DVB button on the remote control to select DVB-T mode Select Yes when asked to use the installation wizzard, (use the left/right buttons to navigate and press ENTER to confirm) Select your country and menu language (use the left/right /up/down buttons to navigate and press to confirm) ENTER Select yes to start auto-scan Use CH+/CH- to select channels
AC/DC adapter Connect to 230 V. AC wall outlet
Basic operation DVD/VCD/CD:
3 Battery compartment (batteries not included) DVB-T antenna (included) ATV/FM antenna socket DVB-T antenna socket 4 Open the TFT cover Insert a DVD/CD (label facing up) Wait unil the unit reads the disc, it will show DVD, VCD or CD in the TFT display The disc will be played automatically
Please refer to the manual for a more detailed explanation about the button functions.

DTVRDTVR-700

7" Wide 16:9 TFT LCD Monitor Slot In Disc DVD/DivX Player Built-in DVB-T/ TV Tuner FM PLL RADIO USB and 3 in 1 Card Reader Full Remote Controller

CONTENT

1. PRECAUTIONS01 2. CAUTIONS ON USING THIS PLAYER.02 3. CHECKING ACCESSORIES.03 4. SPECIFICATION.04 5. PARTS NAME AND FUNCTIONS..04
5.1 PARTS ON THE FRONT OF THE PLAYER..04 5.2 PARTS ON THE BACK OF THE PLAYER...05 5.3 PARTS ON THE TOP OF THE PLAYER.05 5.4 PART ON THE RIGHT SIDE OF THE PLAYER..06 5.5 TOUCH KEY IN THE FRONT OF THE PLAYER...07 5.6 REMOTE CONTROL UNIT...08
6. USING REMOTE CONTROL UNIT09
6.1 PRECAUTIONS BEFORE USING REMOTE CONTROL UNIT.09 6.2 RANGE....09 6.3 INSTALL BATTERY FOR REMOTE CONTROL UNIT..10

7. USING THE BATTERY.11

7.1 7.2 7.3 7.4 7.5 7.6 7.7 PRECAUTIONS BEFORE USING THE BATTERY..11 BATTERY STORAGE....11 BATTERY LIFE....11 USING THE BATTERY...11 INSTALLING THE BATTERY.11 RECHARGING THE BATTERY BY USING AC-DC ADAPTER..12 CAUTIONS WHEN CHARGING THE BATTERY..12
8. CONNECTING THE PLAYER TO OTHER COMPONENTS.12
8.1 CONNECTING TO AC-DC ADAPTER...12 8.2 CONNECTING EARPHONE...12 8.3 CONNECTING TO USB STORAGE.13 8.4 CONNECTING TO MEMORY CARD (SD/MMC/MS).13 8.5 CONNECTING TO A TV SET....13 8.6 CONNECTING TO AN AMPLIFIER THAT HAS NOT THE DIGITAL AUDIO DECODER (DOLBY/DTS/MPEG)...14 8.7 CONNECTING TO AN ACTIVE SPEAKER SYSTEM.15 8.8 CONNECTING TO AN AUDIO/VIDEO PLAYER SYSTEM..15

9. BASIC OPERATIONS.16

9.1 TURNING ON/OFF THE MAIN UNIT...16 9.2 PLACING DISCS.16 9.3 PLAYING DISCS....16 9.4 REMOVING DISCS....16 9.5 MODE SETTINGS.16 9.6 STOPPING THE PLAYING...16 9.7 PAUSING THE DISC....16 9.8 SCANNING FORWARD AND BACKWARD..17
9.9 REPEAT PLAYING THE DISC...17 9.10 SEARCHING THE DISC....17 9.11 ZOOM PLAYING....17 9.12 PROGRAM PLAYING....18 9.13 USING OSD....19 9.14 SELECTING A SUB-TITLE...19 9.15 SELECTING AN AUDIO...19 9.16 SELECTING AN ANGLE....19 9.17 PLAYING MP3 AND JPEG DISC...19 9.18 PLAYBACK THE FILES STORED ON A USB STORAGE DEVICE19 9.19 PLAYING THE FILE STORING IN A MEMORY CARD.20
10. MAIN UNIT SETTINGS.20
10.1 SELECTING A TV SYSTEM....21 10.2 SETTING SCREEN SAVER....21 10.3 SELECTING A TV SCALE...21 10.4 SETTING PARENT LOCK...22 10.5 SETTING PARENT LOCK LEVEL...22 10.6 DEFAULT SETTING....22 10.7SELECTING THE OSD LANGUAGE...23 10.8 SELECTING THE AUDIO LANGUAGE...23 10.9 SELECTING THE SUBTITLE LANGUAGE...23 10.10 SELECT THE MENU LANGUAGE...23

11. ATV MODE.24

11.1 INSTALL ANTENNA....24 11.2 ATV SETUP....24 11.2.1 TV FORMAT....24 11.2.2 AUTO SEARCH...25 11.2.3 SKIP SWITCH.25 11.2.4 FINE TUNE.25 11.3 HOW TO SELECT ATV PROGRAM...25 11.4 HOW TO CONTROL THE VOLUME...25

12. DVB-T MODE..26

12.1 INSTALL ANTENNA....26 12.2 DVB-T SETUP...26 12.3 CHANNEL GUIDE...26 12.3.1 TV CHANNELS.26 12.3.2 RADIO CHANNELS.27 12.3.3 CHANNELS CLASS.27 12.3.4 CHANNELS EDIT....28 12.4 SYSTEM CONFIG....29 12.4.1 TV SETTING.29 12.4.2 LANGUAGE.30 12.4.3 PARENT CONTROL.30 12.4.4 TIME SETTING.31
12.4.5 SYSTEM INFO.32 12.5 INSTALLATION....32 12.5.1 AUTO SCAN....32 12.5.2 MANUAL SCA.33 12.5.3 DEFAULT SETUP.33 12.6 HOW TO SELECT DVB-T/RADIO PROGRAM33 12.7 HOW TO SELECT DVB-T/RADIO FAVORITE PROGRAM33 12.8 HOW TO CONTROL THE VOLUME.33

Special note regarding the use of this player in vehicles
We strongly advise against using the player while driving. Most countries and states have laws which prohibit or severely restrict the use of the player in vehicles while driving. Do not leave the player or the battery pack in places where the temperature is extremely low (about-10 degrees celsius or lower) or extremely high (about 60 degrees celsius or higher), such as inside the passenger cabin or trunk in midsummer. Doing so may warp the outer case or reduce the performance or quality of the battery pack. 02

When carrying on planes

Heed the airline company's rules.
When carrying in hospitals Heed the hospital's rules. When using with car power cable in cars
Please turn on the engine and then connect with the car power cable for using.

Cleaning the player

Normally clean the player using a soft, dry cloth. For tough dirt, apply some neutral detergent diluted in 5 to 6 parts water to a soft cloth, wring out thoroughly, wipe off the dirt, then wipe the player with a dry cloth. Note that alcohol, thinner, benzene, insecticides, etc., may cause the print or coating to peel off. Also avoid leaving rubber or plastic products in contact with the player for long periods of time, as this may damage the cabinet. When using chemically treated cloths, read the cloth's instructions carefully. Always unplug the power cord from the power outlet before cleaning the player. To clean dirt off the liquid crystal display, wipe the display gently with a soft, dry cloth (such as an eyeglass cleaning cloth). Note that leaving water droplets on the display for long periods of time may result in discoloration or stains. For tough dirt, use a commercially available liquid crystal display cleaner.

Copyrights

Unauthorized duplication, broadcast, public performance or rental of discs is prohibited by law.
3. Checking the Accessories

(optional)

4. Specifications

POWER CONSUMPTION

< 28 watt / standby 1,9 watt
5. PARTS NAME AND FUNCTIONS 5.1 Parts on the front of the player
1. Speakers 2. Earphone jack 3. touch key 4. ALARM key
connecting to earphone press this to set alarm on or off 04
press this to set TFT sleep time (OFF,10minutes, 20minutes,30minutes, one hour, one and half hours, two hours) 6. LCD display when connecting AC-DC adapter or battery, the LCD display is lit 7. IR receiver window

5.SLEEP key

5.2 Parts on the back of the main unit
1. ATV/FM Antenna socket 2. DVB-T Antenna socket 3. Battery cover
connecting to ATV/FM antenna connecting to DVB-T antenna
5.3 Parts on the top of the player
/ CH+ Moving cursor up / Channel addition.
2. 1) Moving cursor right addition 2) Press these buttons to adjust LCD mode when in LCD mode 05
/ CHMoving cursor down/ channel subtract
4. 1) Moving cursor left subtract 2) Press these buttons to adjust LCD mode when in LCD mode 5. ENTER Confirm settings 6. SETUP Set the system information when the unit is in DVD or ATV or DVB-T mode. 7. SNOOZE
When the alarm is on, press SNOOZE to cancel the alarm. The alarm will be on again after 5 minutes. Note: If you press some other key (mode, menu, enteretc.) to cancel the alarm, the alarm will be stopped completely. When no button is pressed, the alarm will stop completely after 5 min.
8. MODE (1) Press this to select DVD or DVB-T or ATV or RADIO or AV-IN mode, and then press / / ENTER or M+/M-(the remote control) to confirm. Note: 1)The unit will stop play the disc when it is in AV input mode 2) Please do not connect signal input when the unit is in AV output mode 3) DVD mode is the default mode. (2) Press this to switch LCD mode: Brightness, Contrast, Color, TFT display mode, PAL Plus (only for ATV mode), then press / / ENTER or M+/M-(the remote control) to adjust. 1) Brightness: level 0 level 32 2) Contrast: level 0 level 32 3) Color: level 0 level 32 4) LCD display mode: switch screen size 16:9 or 4:3 5) PAL Plus: In ATV mode, set PAL Plus ON or OFF. 9. POWER Power on/off the unit 10. Open TFT cover 11. TFT cover
5.4 Parts on the right side of the player
1. Audio/video output Output audio/video signal 2. Audio/video input Input audio/video signal 3. USB (1.1) socket connecting to USB storage 4. Memory card socket Only for SD, MMC or MS card 5. Connecting to the AC-DC adapter
5.5 Touch Keys on the front of the player
1) Press this to stop play mode. 2) Press this to stop scanning in RADIO mode. 2. 1) Skip previous track/chapter 2) Press this to scan forward in RADIO mode. 3. TIME/ALARM set Press this for 2 seconds to set TIME or ALARM 4. HOUR/ MINUTE Press this to set HOUR or MINUTE 5. Play/Pause Press this to play the disc. When pressed in DVD play mode, pause mode is set. Press again to resume playback. 6. 1) Skip next track/chapter 2) Press this to scan backward in RADIO mode. 3) Press this for 1.5 second to scan automatically in RADIO mode. 7. + 1) Increasing the volume 2) Adjust time in TIME or ALARM settings mode. 8. 1) Decreasing the volume 2) Adjust time in TIME or ALARM settings mode.

1. Stop

5.6 Remote control unit
1. Media 2. 3. /Fav4. /CH+ 5. /Fav+ 6. /CH7. Setup 8. Enter 9. 10. 11. 12. 13. S.title
Press this to select DVD/USB/Card mode Power on/off the unit Moving cursor Left/ Favorite program subtract Moving cursor Up/ Channel addition. Moving cursor Right/ Favorite program addition Moving cursor down/ channel subtract 1) Set up menu when the unit is in DVD mode 2) Set the system information when the unit is in DVB-T or ATV mode to confirm settings Return to menu Press this to fast backward play during play mode Press this to fast forward play during play mode Press this to play or pause Selecting sub-titles 08
DVD: selecting audio language; VCD Selecting the audio channel Stop playing disc in DVD mode or stop scanning in RADIO mode Increasing the volume Decreasing the volume Skip previous track/chapter in DVD mode or scan forward in RADIO mode. 19. 1) Skip next track/chapter in DVD mode or scan backward in RADIO mode. 2) Press this for 1.5 second to scan automatically in RADIO mode. Switch off the speakers or earphone 20. 21. DVD Press this to select DVD mode 22. DVB Press this to select DVB mode 23. Radio Press this to select Radio mode 24. TV Press this to select ATV mode 25. A-B Press this to set A point, press again to set B point, then the unit playing from A to B repeated. Press 3'rd to cancel the A-B play. 26. Goto Selecting the Title/Chapter/Time to play 27. Zoom Zooming the picture 28. Info Press this buttons to display the disc and playing information in the LCD in DVD mode or display program information in DVB-T mode. 29. REP DVD: repeat play the title, chapter VCD, CD: repeat the track or whole disc 30. PGM Programming the play sequence 31. Title/TTX Displaying DVD title/ Display tele-text 32. Mode Press this to switch LCD mode 33. MAdjust the mode 34. Angle/EPG Press this to select the DVD angle / Display electron program guidance. 35. MENU / TV/R Menu play in DVD mode/ selecting TV or Radio program 36. M+ Adjust the mode
14. Audio 15. 16. V+ 17. V18.
6. USING REMOTE CONTROL UNIT
6.1 Recautions before using remote control unit 1) Please pull out the PVC when the remote control unit is used for the first time 2) Don't drop or step on the remote control unit or subject it to shocks 3) Note that it may not be possible to operate the main unit if there are obstacles between it and the remote sensor 4) Don't expose the remote sensor to strong light. 5) Using the remote control unit within the specified operating range. 6.2 Remote control unit operating range 1 Horizontal: Vertical: Distance: 5M 09
Note: Most of the player's functions can be performed from the remote control unit. Some operations, however, can only be performed from the main unit. 6.3 INSTALL BATTERY FOR REMOTE CONTROL UNIT Insert your finger nails into A and B on the diagram below, press A according to the direction, then pull out the battery holder.

8. CONNECTING THE PLAYER TO OTHER COMPONENTS
8.1connecting to AC-DC adapter 1) Please plug the AC-DC adapter to an AC power socket; 2) Connect the DC output of adapter to DC in of the main unit. Note: AC-DC adapter specification: 12V/2A. Please use the adapter that is the standard accessory of the main unit.
8.2 Connecting an earphone Connect the earphone plug securely to the earphone jack on the main unit. To listen to audio, use V+/V- or +/- (touch key) to adjust the volume to a comfortable level. Note: Please do not use DTS discs. Strong noise is produced when DTS discs are played.
Note: Insert the earphones plug securely. No sound will be heard unless the earphones are securely connected. 12
8.3 connecting to USB storage 1) Please connect the USB storage to the USB terminal of the main unit 2) The main unit will read the contents that are available on the USB storage device automatically Note: 1)The USB terminal of the main unit support USB 1.1 only. 2)The main unit will read the contents of a USB storage device when the main unit is set in USB mode.
8.4 connecting to memory card (SD/MMC/MS) 1) Please insert the memory card into the memory socket of the main unit 2) The main unit will read the contents that are available on the memory card automatically Note: 1) Please insert the memory card in right direction, SD/MMC cards should be inserted upside down 2) The main unit will read the contents of a memory card when the main unit is set in Card mode.
13 8.5 Connecting to a TV set Before connecting
Turn off the power of the player and the devices to be connected.
8.6 Connecting to a digital amplifier that is not Dolby Digital / DTS / MPEG compatible Output the digital signals from the player's digital output to a digital amplifier that is not Dolby /DTS/MPEG compatible. Note: 1) Carefully check the players digital output settings before connecting the player to an amplifier which is not Dolby Digital / DTS / MPEG compatible. 2) Do not play DVDs when the audio settings are not correct. This may cause strong noise and damage your speakers. 14 8.7 Connecting to active speaker systems

Note: Please set the main unit to AV output mode. 8.8 Connecting to a Audio/Video player system
Note: Please set the main unit to AV input mode.

9. BASIC OPERATIONS

9.1 Turning on/off the main unit 1) Turn power on (1) The main unit is in standby mode when the unit is powered (2) Press POWER (remote control unit or the main unit 1.5 seconds) to turn on the unit when the unit is powered. 2) Turn power off Press POWER (remote control unit or the main unit 1.5 seconds) to turn off the unit. 9.2 Placing discs 1) Power on the player 2) Open the TFT cover 3) Place the disc 4) Close the TFT cover Note: 1) Please place the disc correctly 2) Do not use discs that are scratched 9.3 Playing discs 1) Reading disc, DVD, VCD or CD will be shown in the TFT display. 2) The disc will be played automatically 3) Press PLAY to play the disc 9.4 Removing discs 1) Press STOP to stop playback 2) Open the TFT cover 3) Take out the disc 4) Close the TFT cover 9.5 Mode settings (Brightness/Contrast/Color/TFT display mode /PAL Plus(only for ATV mode)) Please press MODE (remote control or in the main unit) to select an item you want to adjust/change when the main unit is in play mode. 1) Press MODE, setting brightness; 2) Press MODE, setting color; 3) Press MODE, setting contrast; 4) Press MODE, setting LCD display mode; 5) Press MODE, In ATV mode, setting PAL Plus ON or OFF. 9.6 Stopping the playing 1) Press STOP to pause the playing, the unit can memorize the play point 2) Press PLAY to continue play from the pausing point 3) Press STOP to stop the disc Note: The unit can not continue play from the pausing point for some discs 9.7 Pausing the disc 1) Press PLAY/PAUSE to pause the playing during playback 2) Press PLAY/PAUSE to continue playback 16 9.8 Scanning forward and backward 1) Press REV/FWD (the remote control) 1.5 seconds to speed up the playing when
playing in forward/backward direction 2) Change the playing speed to X2, X4, X8, X20 and normal by pressing the REV/FWD button on the remote control unit.
9.9 Repeat playing the disc 1) A-B play mode (1) Press A-B, the TFT will show Repeat A(2) Press A-B again, the main unit will repeat the play from A to B. (3) Press A-B again, the unit will resume normal playing. 2) Repeat playing the title, chapter or track (1) Press REPEAT to select the title, chapter or track when the unit is in play mode (2) DVD: title, chapter; VCD or CD: track. 9.10 Searching the disc 1) Press GOTO 2) Use the cursor key and ENTER to select the proper playing item 3) Use the digits to select playing time, title, chapter or track 4) Press ENTER to confirm the playing item 5) Press GOTO to resume the play mode 9.11 Zoom playing Press ZOOM every times, the picture will change to 2X, 3X, 4X, 1/2X, 1/3X, 1/4X and normal. 17 9.12 Program playing The main unit may play the list according to the following program list:

1) Press PROGRAM, the menu will be shown in the LCD
Hint: (1) T is for Title, C is for Chapter (DVD discs). (2) T for track (CD, VCD discs) NOTE: There is no title, chapter or track for some discs. 2) Use the digits and cursor to select the list what you want. See the picture.
3) Use the cursor key to move the cursor to the PLAY icon, and press ENTER to start to play the list 4) Use the cursor key to move the cursor to the CLEAR icon, and press ENTER to clear the play list. 5) Press PLAY/PAUSE or select the EXIT icon and press ENTER to exit program menu. Note: 1) The program list will be canceled when the main unit is powered off or when the disc is ejected. 2) There is no program function for some disc. 3) The unit can not play the list if you select the item that does not exit in the disc. 18 9.13 Using OSD 1) Press INFO show the play and disc information in the LCD when the main unit is in play mode. 2) Press INFO again to disable the information display.
9.14 Selecting a sub-title Press SUBTITLE to select the sub-title when the main unit is in play mode. 9.15 Selecting audio 1) Press AUDIO to select the audio language when the main unit is in play mode for DVD discs 2) Press AUDIO to select the audio channel when the main unit is in play mode for VCD, discs. 9.16 Selecting an angle Press ANGLE to select the camera angle when the main unit is in play mode for DVD disc, there is no function for other disc.
9.17 Playing MP3 and JPEG disc 1) Use the cursor key to move the cursor to the directory, file, MP3 icon or JPEG icon 2) Select the MP3 icon and press ENTER if you want to playback MP3s, select the JPEG icon and press ENTER if you want to playback JPEG files. 3) Select a file and press ENTER if you want to playback the file. 4) Press PLAY/PAUSE to play the sequence 5) Press A-B to repeat A-B playing. 9.18 Playback the files stored on a USB storage device Connect the USB storage device to the USB socket of the main unit, the files stored on the storage device will be read automatically.
19 1) Power on the unit, connect the USB storage to USB socket. 2) READ USB will be shown in LCD and the files will be displayed in the LCD when the unit finished the reading.
3) Operation is like playing MP3 or JPEG files 4) Please remove the USB storage device directly when not using the USB storage device The MP3, JPEG, MPEG4 file can be play in this unit Note: 1) USB in this unit is USB 1.1 2) The main unit can read the contents of a USB storage device when the main unit is in no disc or no card mode. 3) If the main unit is in disc or card mode, press DVD (the remote controller) to set in USB mode, the main unit can play the file stored in the USB storage. 9.19 Playback the files stored on a memory card Please insert the card (SD, MMC, MS) in to the socket. The file will be played automatically. 1) Power on the unit, insert the card in to the socket. 2) READ CARD will be shown on the LCD and the files will be displayed on the LCD when the unit finished the reading. The SD, MMC,MS formats can be read in this unit. Note: 1) The main unit can read the contents of card when the main unit is in no disc or no card mode. 2) If the main unit is in disc or USB mode, press Media (the remote controller) to set it in CARD mode, the main unit will then be able to play the files stored on the card. 3) BECAUSE OF THE LARGE DIVERSITY OF PRODUCTS WITH USB-, SD- AND MMC-PORTS

AND THE SPECIFIC MANUFACTURERSPECIFICATIONS WE CAN NOT GUARANTEE THAT ALL DEVICES WILL BE RECOGNIZED OR THAT ALL POSSIBLE CONFIGURATIONS WILL FUNCTION PROPERLY.

10. MAIN UNIT SETTINGS

Press SETUP when the main unit is in play mode. The set up menu will be displayed in LCD. 20 10.1 Selecting a TV system Please select the proper video signal system if you want to see on a TV set. 1) NTSC: Please select this item when TV set is NTSC system TV set 2) PAL: Please select this item when TV set is PAL system TV set

3) Default: NTSC

Note: The picture may be a grey picture if the system is not correctly set. 10.2 Setting AUTO PLAY This function can set skipping the DVD title and playing directly. 1) ON: skip DVD title, and play directly 2) OFF: enter DVD title directly 3) Default: ON
10.3 Selecting a TV scale 1) 16:9 : Please select this item when connecting this unit to a 16:9 TV set. 2) 4:3LB : Please select this item when connecting this unit to a normal TV set. 3) 4:3PS : Please select this item when connecting this unit to a normal TV set.
Note: Picture scale is depending on the disc. 21 10.4 Setting parent lock 1) Default setting: 0000 2) When unlocked, a new parent lock can be entered, the parent lock level can be set
10.5 Setting parent lock level 1) This setting can control the unit to playback parent lock DVD discs. 2) Rating is divided into 8 levels, Selecting ADULT, the lock is cancel 3) Default: ADULT
Note: The parent lock level can not be set if the parent lock is locked. 10.6 Default setting To restore the factory setting, please select this item and press ENTER
22 10.7 Selecting the OSD language Please enter the OSD language select menu, use the cursor key to move the cursor to the language you want and press ENTER.
10.8 Selecting the audio language Please enter the audio language select menu, use the cursor key to move the cursor to the language you want and press ENTER
10.9 Selecting the sub-title language Please enter the sub-title language select menu, use the cursor key to move the cursor to the language you want and press ENTER
10.10 Select the menu language Please enter the menu language select menu, use the cursor key to move the cursor to the language you want and press ENTER 23
Note: 1) The language will be the disc default language if the language you want is not visible 2) Default language: English

11. ATV MODE

Please press mode (in the main unit) or TV (in the remote controller) to select ATV mode. 11.1 Install antenna Plug the antenna to the antenna socket. 11.2 ATV SETUP When press SETUP (the main unit) or setup (the remote controller) in ATV mode, the unit will be in ATV setup status. ATV setup main menu is as following:
You could use Up/Down (the main unit or remote controller) to select TV format, auto search, skip switch or fine tune, press ENTER (remote controller or the main unit) to confirm. You could use (remote controller) to return. You could use SETUP (remote controller) or SETUP (the main unit) to exit. 11.2.1 TV FORMAT You could select the correct TV format where you are.Using Up/Down (the main unit or remote controller) to select. and press ENTER (remote controller or the main unit) to confirm. You could use (the main unit or remote controller) to return. Using SETUP (remote controller) or SETUP (the main unit) to exit.

24 11.2.2 AUTO SEARCH

The unit will search the program automatically if you select AUTO SEARCH, the main unit will show the following:
11.2.3 SKIP SWITCH The unit will setup the program which you want to skip ON/OFF if you select the skip switch. And the main unit will show the following:
Using Up/Down (the main unit or remote controller) to select. and press ENTER (remote controller or the main unit) to confirm. If you want to resume the program which you skipped, please press the digit key to select the number of that program, then set it to skip off. 11.2.4 FINE TUNE The unit will tune the program in small steps if you select fine tune. Use left/right (the main unit or remote controller) to tune. The main unit will show the following:
11.3 How to select ATV program You could use CH+/CH- (the main unit or remote controller) to select the program. Use the digits to select the program what you want. 11.4 How to control the volume You could use V+/V- or +/- (touch key) to control the volume. 25

12. DVB-T MODE

Please press MODE (in the main unit )or DVB (in remote controller) to select DVB-T mode. 12.1 Install antenna Plug the antenna to the antenna socket 12.2 DVB-T SETUP When you press SETUP (the remote controller) or SETUP (the main unit) in DVB-T mode, the unit will be in DVB-T setup status.The DVB-T setup main menu is as follows
You could use the cursor key and ENTER to select the correct settings. You could use to return. You could use SETUP to exit. 12.3 Channel Guide 12.3.1 TV Channels When you select TV channels, the unit will show the following: Note: Without TV PROGRAM, the TV channels can not be selected

You could use UP/DOWN to select TV program and press ENTER to confirm your choice.Using LEFT/RIGHT to switch program classify (Favor, Movie, News or Show). You could use to return. You could use SETUP to exit. Press INFO (the remote controller) to sort the channel, the unit will show the following: The sort routine: A~Z, Z~A, Free~ Scramble, Scramble ~ Free, Transponder. You could use to return. You could use SETUP to exit.
12.3.2 Radio Channels When you select Radio channels, the unit will show the following: Note: Without Radio PROGRAM, the radio channels can not be selected
You could use UP/DOWN to select a Radio program, press ENTER to confirm your choice. Use LEFT/RIGHT to switch program classify. You could use to return. You could use SETUP to exit. Press INFO (the remote controller) to sort the channel, the unit will show the following: The sort routine: A~Z, Z~A, Free~ Scramble, Scramble ~ Free, Transponder. You could use to return. You could use SETUP to exit. 12.3.3 Channels Class When you select Channels Class, the unit will be shown as following: Note: Without TV /Radio PROGRAM, the channels class can not be selected
You could use cursor key and ENTER to class the program, Press ENTER again to cancel your choice. Press TV/R (the remote controller) to switch TV or RADIO mode. Using to return. You could use SETUP to exit. 27
12.3.4 Channels Edit When you select Channels Edit, the unit will show the following: Note: Without TV /Radio PROGRAM, the channels edit can not be selected (1) Rename Program
You could use UP/DOWN to select the program which you want to rename, press ENTER to confirm your choice. Then use UP/DOWN to choose a character, use LEFT/RIGHT to move the position, press ENTER to finish rename. Press TV/R (the remote controller) to switch TV or RADIO mode. You could use to return and use SETUP to exit. (2) Move program
You could use UP/DOWN to move the program which you want to move, press ENTER to finish move. Press TV/R (the remote controller) to switch TV or RADIO mode. You could use to return and use SETUP to exit.

(3) Delete program

You could use UP/DOWN to delete the program which you want to delete, and press ENTER to confirm your choice. Press ENTER again to cancel your choice. Press TV/R (the remote controller) to switch TV or RADIO mode. You could use to return and use SETUP to exit. 12.4 System Config When you select System Config, the unit will show the following:
You could use the cursor key and ENTER to select the correct settings. You could use to return. You could use SETUP to exit. 12.4.1 TV Setting When you select TV Setting, the unit will show the following:
You could use cursor Up/Down to select TV System, TV Type. Use cursor left/ right to select the correct setup which you want. Press ENTER to pop-up the list. You could use to return and use SETUP to exit. 29

12.4.2 Language When you select Language, the unit will show the following:
You could use cursor Up/Down to select OSD Language. Use cursor left/ right to select the OSD language you want. Press ENTER to pop-up the list. You could use to return and use SETUP to exit. 12.4.3 Parent Control When you select Parent Control, the unit will show the following:
You could use cursor Up/Down to select change pin, channel lock. When you select change pin and press ENTER to confirm, the unit will show the following:
Use the digits to enter the old pin(original password:0000), enter new pin (the password you want), confirm. When you select channel lock and press ENTER to confirm, the unit will show the following:
Use the digits to enter the password, the unit will show the following: Note: 1.The password is same with the new pin. 2. Without TV signal, the password can not be input.
You could use UP/DOWN to select the program which you want to lock, press ENTER to confirm your choice. Press ENTER again to cancel your choice. Press TV/R (the remote controller) to switch to TV or RADIO mode. You could use to return and use SETUP to exit. 12.4.4 Time Setting When you select Time Setting, the unit will show the following:
You could use cursor up/down to select Time Zone, Sleep. Use cursor left/ right to select the correct setup. Press ENTER to pop-up the list. You could use to return and use SETUP to exit.
31 12.4.5 System Info When you select System Info, the unit will show the following:
You could use to return and use SETUP to exit. 12.5 Installation When you select Installation, the unit will show the following:
You could use the cursor key and ENTER to select auto scan, manual scan, default setup. You could use to return and use SETUP to exit. 12.5.1 Auto Scan When you select Auto Scan, the unit will show the following:
You could use cursor Up/Down to select country or start scan. (1) Select country Use cursor left/ right to select the country you want. You could use to return and use SETUP to exit.
32 (2) Start Scan Press ENTER to confirm. And the unit will show the following: The main unit will search the program automatically. Use SETUP to stop and exit.
12.5.2 Manual Scan When you select Manual Scan, the unit will show the following:
You could use cursor Up/Down to select country, scan type or start channel. Use cursor left/ right to select the correct setup. Then use cursor UP/DOWN to select start scan, press ENTER to confirm. You could use to return and use SETUP to exit. 12.5.3 Default Setup When you select Default Setup, the unit will show the following:

You could use cursor Up/Down to OK, cancel. And press ENTER to confirm. 12.6 How to select DVB-T/radio program You could use CH+/CH- (the main unit or the remote controller) or the digits to select the program. 12.7 How to select DVB-T/radio favorite program You could use FAV+/FAV- (the remote controller) to select the favorite program. 12.8 How to control the volume You could use V+/V- or +/- (touch key) to control the volume.

13. RADIO MODE

Please press mode (in the main unit) or RADIO (in the remote controller) to select RADIO mode. 13.1 Install antenna Plug the FM antenna to the antenna socket. 13.2 AUTO SEARCH The unit will search the program automatically if you press (the main unit or the remote controller) for 1.5 seconds. And use to stop scanning. 13.3 How to select RADIO program You could use CH+/CH- (the main unit or remote controller) or the digits to select the program. 13.4 How to control the volume You could use V+/V- or +/- (touch key) to control the volume.

14. Trouble shooting

Please refer the following instruction when there are some problems with this unit. If the problem still exists, please consult your nearest service center.

DTVR-700 EN-V0.1