Lexmark X1 100
We offer the following Lexmark X1100 Ink Cartridges: 10N0016, 10N0026. We use high quality ink and toner to ensure that it works perfectly on your inkjet and laser printer.
Part Number: X1100
Here you can find all about Lexmark X1 100, for example manual and review. You can also write a review. [ Report abuse or wrong photo | Share your Lexmark X1 100 photo ]
Lexmark X1 100 Printer, size: 733 KB
Lexmark X1 100
User reviews and opinions
|NorikatsuFujita||1:13pm on Tuesday, September 7th, 2010|
|Garbage item Only used about one month and it was broken. I had to back up data, reinstall OS and exchange the item with WD. Working perfectly with Mac OS X 10.6.4 (Snow Leopard). Working perfectly with Mac OS X 10.6.4 (Snow Leopard). After 10 months.|
|dev_82||11:49am on Tuesday, July 6th, 2010|
|This series of disks from Seagate are reliable, quiet and suitable for personal and business use. Good balance for the price. Buffer size.|
|kozmoz||10:06pm on Tuesday, May 25th, 2010|
|I cloned a 250 GB drive to this one using Seagate Discwizard. Worked perfectly. No problems Quiet, fast, reasonably priced. This thing is a piece of work. I had this for only a little over a year. Incredible difficult to configure. The MioNet web interface is terrible.|
|doll||2:06am on Tuesday, April 13th, 2010|
|I got this drive to replace a slow 5400 rpm Seagate drive and is amazed at the screaming performance and its quietness. Somewhat Satisfied After two years, this drive finally went South on me. I wish hard drives were not so short lived. I guess two years is not so bad.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
X1100 Series All-In-One
Learning about the All-In-One Understanding the software Using the All-In-One Maintenance Troubleshooting
Edition: May 2003 The following paragraph does not apply to any country where such provisions are inconsistent with local law: LEXMARK INTERNATIONAL, INC., PROVIDES THIS PUBLICATION AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in later editions. Improvements or changes in the products or the programs described may be made at any time. Comments about this publication may be addressed to Lexmark International, Inc., Department F95/032-2, 740 West New Circle Road, Lexington, Kentucky 40550, U.S.A. In the United Kingdom and Eire, send to Lexmark International Ltd., Marketing and Services Department, Westhorpe House, Westhorpe, Marlow Bucks SL7 3RQ. Lexmark may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. You can purchase additional copies of publications related to this product by calling 1-800-553-9727. In the United Kingdom and Eire, call +44 (0)044. In other countries, contact your point of purchase. References in this publication to products, programs, or services do not imply that the manufacturer intends to make these available in all countries in which it operates. Any reference to a product, program, or service is not intended to state or imply that only that product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any existing intellectual property right may be used instead. Evaluation and verification of operation in conjunction with other products, programs, or services, except those expressly designated by the manufacturer, are the users responsibility. Lexmark and Lexmark with diamond design are trademarks of Lexmark International, Inc., registered in the United States and/or other countries. Other trademarks are the property of their respective owners. 2003 Lexmark International, Inc. All rights reserved. UNITED STATES GOVERNMENT RIGHTS This software and any accompanying documentation provided under this agreement are commercial computer software and documentation developed exclusively at private expense. Safety information Use only the power supply provided with this product or the manufacturers authorized replacement power supply. Connect the power cord to an electrical outlet that is near the product and easily accessible. Refer service or repairs, other than those described in the user documentation, to a professional service person.
CAUTION: Do not use the fax feature during a lightning storm. Do not set up this
product or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning storm. Copyright advisory It may be illegal to copy certain materials without permission or license, including documents, images, and currency. If you are not sure whether you have permission, seek legal advice.
Learning about the All-In-One.. 1
Setting up the All-In-One... 1 Understanding the parts of the All-In-One. 1 Using the control panel... 2
Understanding the software.. 3
Using the Lexmark All-In-One Center.. 3 Using Print Properties.. 6 Using the Lexmark Solution Center... 8 Using the Lexmark Photo Editor... 9
Using the All-In-One... 10
Printing... 10 Scanning... 13 Copying.... 14 Faxing.... 16
Replacing the print cartridges... 17
Troubleshooting checklist... 19 Setup troubleshooting... 20 Printing troubleshooting.. 22 Scanning, copying, and faxing troubleshooting. 24
Removing and reinstalling the software.. 26 Other help sources... 26
Thank you for purchasing a Lexmark X1100 Series All-In-One!
Congratulations on your purchase. The Lexmark X1100 Series All-In-One combines the functionality of an inkjet printer, a scanner, a copier, and a fax machine all into a single, multifunction device, making it one of the most exciting products on the market today. This guide tells you how to perform printing, copying, scanning, and faxing tasks. Also included are sections describing the All-In-One software and troubleshooting information.
Learning about the All-In-One
Setting up the All-In-One
If you have not already done so, follow the steps on the Setup Sheet to complete the hardware and software installation. If problems occur during the setup process, see Setup troubleshooting on page 20.
Understanding the parts of the All-In-One
Paper guide Slide next to paper to ensure proper feeding. Paper support Lift to load paper into the All-In-One. Control panel Use the buttons to operate the All-In-One (see page 2 for details about each of the buttons).
Top cover Lift to place an item on the scanner glass.
Paper exit tray Extend to hold paper as it exits the All-In-One.
Scanner unit Lift to access the print cartridges.
USB cable connector
USB cable Power supply Silver, metal contacts are on the left side of the power supply.
Using the control panel
The All-In-One has a control panel that lets you scan and copy with the press of a button.
Power button Press to turn the All-In-One on and off. Paper Feed button Press to feed paper through the All-In-One. Scan button Press to start the scanning process and open the All-In-One Center. Black Copy button Press to make a black and white copy.
Color Copy button Press to make a color copy.
Note: Both the computer and the All-In-One must be turned on to make copies.
Understanding the software
The All-In-One software consists of four main components:
The Lexmark X1100 Series All-In-One Center (scanning, copying,
and faxing) Print Properties (printing) The Lexmark X1100 Series Solution Center (troubleshooting, maintenance, and cartridge ordering information) The Lexmark Photo Editor (editing graphics)
Using the Lexmark All-In-One Center
Use the Lexmark X1100 Series All-In-One Center software to scan, copy, and fax documents. There are three ways to open the All-In-One Center:
Programs Lexmark X1100 Series Lexmark All-In-One Center. Double-click the Lexmark X1100 Series All-In-One Center icon on the desktop. Press Scan on the control panel. For more information about using the control panel, see page 2. The All-In-One Main Page displays.
All-In-One Center All-In-One Main Page
Scan section Copy section Creative Tasks section
The All-In-One Main Page
The All-In-One Main Page consists of four main sections: Scan, Copy, Creative Tasks, and Preview.
From this section: Scan You can: Select a program to send the scanned image to. Choose what type of image is being scanned. Choose how the scan will be used. Note: Click See More Scan Settings to view all settings. Copy Select the quantity and color of your copies. Select a quality setting for your copies. Adjust the size of the scanned area. Lighten or darken your copies. Enlarge or reduce your copies.
Note: Click See More Copy Settings to view all settings. Creative Tasks Choose from a variety of creative ideas. Preview section Enlarge or reduce an image. Repeat an image several times on one page. Print an image as a multi-page poster. E-mail an image to a friend. Fax using your computers modem. Save an image on my computer. Edit text found in a scanned document (OCR). Modify an image with a photo editor.
Select a region of the preview image to scan. View an image of what will be printed or copied.
Note: For more information about the All-In-One Main Page, click the Help button located in the upper right corner of the screen.
View Saved Images page
Use the View Saved Images page to perform tasks with images that are saved on the computer. The View Saved Images page consists of three sections.
From this section: Open with. Print a Copy. You can: Select a program to send the saved image to. Choose the quantity and color of your copies. Select a quality setting for your copies. Lighten or darken your copies. Enlarge or reduce your copies.
Note: Click See More Copy Settings to view all settings. Creative Tasks Select from a variety of creative ideas. For help, see page 4.
Note: For more information about this page, click the Help button located in the upper right corner of the screen.
The Maintain/Troubleshoot page provides you with direct links to the Lexmark Solution Center. Choose from these topics:
Maintain or fix quality problems Troubleshoot All-In-One problems Device status and ink levels More printing ideas and how tos Contact information Advanced (skin, voice, and communication options) View the software version and copyright information
For more information about the Lexmark Solution Center, see page 8. Note: For more information about this page, click the Help button located in the upper right corner of the screen.
Using Print Properties
Print Properties is the software that controls the All-In-One printing function. You can change the settings in Print Properties based on the type of project you want to create. You can open Print Properties from almost any program:
1 From the program File menu, click Print. 2 In the Print dialog box, click the Properties, Preferences, Options,
or Setup button (depending on the program). The Print Properties screen displays. Note: Some programs open Print Properties differently.
Print Properties Quality Copies tab and I Want To menu
Print Properties tabs Use the Quality/ Copies, Paper Setup, and Print Layout tabs to select the print settings.
I Want To menu Select one of the projects from the menu to help print photos, banners, envelopes, posters, and more.
The I Want To menu
The I Want To menu displays when you open Print Properties. It contains a variety of task wizards to help you select the correct print settings for your project. Close the menu for a full view of the Print Properties dialog box.
Print Properties tabs
All of the print settings are on the three main tabs of the Print Properties software: Quality/Copies, Paper Setup, and Print Layout.
From this tab: Quality/Copies You can change these settings: Quality/Speed Select a Quality/Speed setting. Multiple Copies Customize how the All-In-One prints several copies of a single print job: collated or normal. Print Color Images in Black and White Select this to print color images in black and white. Paper Setup Type Select the type of paper you are using. Paper Size Select the size of the paper you are using. Orientation Select how you want the document oriented on the printed page: portrait or landscape. Print Layout Layout Select the layout you want to print. Duplexing Select this when you want to print on both sides of the paper.
Note: For additional information about these settings, right-click a setting on the screen, and then select the Whats This? item.
Save Settings menu
From the Save Settings menu, you can name and save the current Print Properties settings for future use. You can save up to five custom settings.
Use the Options menu to make changes to the Quality Options, Layout Options, and Printing Status Options settings. For more information on these settings, open the tab dialog box from the menu, and then click the Help button on the dialog box. The Options menu also provides you with direct links to different parts of the Lexmark Solution Center (see page 8), as well as software version information.
Using the Lexmark Solution Center
The Lexmark X1100 Series Solution Center is a valuable information resource. To open the Lexmark Solution Center, click Start Programs Lexmark X1100 Series Lexmark X1100 Series Solution Center. The Printer Status tab displays.
Lexmark Solution Center Printer Status tab Printer Status Ink levels
The Lexmark Solution Center consists of six tabs: Printer Status, How To, Troubleshooting, Maintenance, Contact Information, and Advanced.
From this tab: Printer Status (Main dialog box) How To You can: View the status of the All-In-One. For example, while printing, the status is Busy Printing. View the ink levels of the print cartridges. Learn how to: Troubleshooting Maintenance Scan, copy, fax, and print. Find and change settings. Use basic features. Print projects such as banners and iron-on transfers.
Learn tips about the current status. Solve All-In-One problems. Install a new print cartridge. Note: Wait until scanning is complete before installing new cartridges. View shopping options for new cartridges. Print a test page. Clean to fix horizontal streaks. Align to fix blurry edges. Troubleshoot other ink problems. Remove Japanese postcard residue.
From this tab: Contact Information Advanced
You can: Learn how to contact Lexmark by phone, e-mail, or on the World Wide Web. Change the appearance of the Printing Status window and turn printing voice notification on or off. Obtain software version information.
Note: For more information, click the Help button located in the lower right corner of the screen.
Using the Lexmark Photo Editor
Use the Lexmark Photo Editor software to edit graphics. To open the Lexmark Photo Editor, click Start Programs Lexmark X1100 Series Lexmark Photo Editor. The Lexmark Photo Editor displays. Use the touch-up tools to edit your graphic. Move your pointer over the tool for a description.
Lexmark Photo Editor
Using the All-In-One
The following sections give you everything you need to know for basic printing, scanning, copying, and faxing.
The Print Properties I Want To menu (see page 6) provides you with printing wizards to help you complete tasks such as printing banners, photographs, or posters.
1 Depending on what you want to print, load the appropriate type of
paper into the All-In-One. Place the paper against the right side of the paper support with the print side facing you. Make sure you select the paper size for your document. For help, see page 12.
Load up to:
100 sheets of plain paper 25 sheets of labels 25 iron-on transfers 25 sheets of photo/glossy paper 10 transparencies
Note: Since transparencies and photos require more drying time, we recommend that you remove each transparency or photo as it exits and allow to dry to avoid ink smearing.
20 sheets of banner paper 10 sheets of greeting card stock 10 Hagaki cards 10 envelopes
Note: Do not load envelopes with: Holes, perforations, cutouts, or deep embossing. Metal clasps, string ties, or metal folding bars. Exposed flap adhesive.
2 Squeeze and slide the paper guide to the left edge of the paper.
3 Make sure the All-In-One is turned on. 4 Click File
5 In the Print dialog box, click the Properties, Preferences, Options,
or Setup button (depending on the program). The Print Properties dialog box displays.
6 If the printing task you want to perform is on the I Want To menu,
click it, and then follow the instructions on the computer screen; otherwise, click Close at the bottom of the menu.
7 From the Quality/Copies tab, select the quality, speed, and copy
settings. To see details about a setting, right-click a setting on the screen, and then select the Whats This? item.
8 From the Paper Setup tab, select the paper type, paper size, and
orientation. To see details about a setting, right-click a setting on the screen, and then select the Whats This? item.
Paper type setting Paper size setting
9 From the Print Layout tab, select the layout and duplexing settings
for the type of document you are printing. To see details about a setting, right-click a setting on the screen, and then select the Whats This? item.
10 Once you have applied all the settings you want in Print Properties,
click OK at the bottom of the screen to return to the Print dialog box.
11 Click Print to complete your task.
The following steps show you how to scan and save images.
1 Open the top cover of the All-In-One. 2 Place the item you want to scan face down on the glass. Make sure
the upper left corner of the front of the item aligns with the arrow.
3 Close the top cover. 4 Open the Lexmark All-In-One Center (see page 3).
The All-In-One Main Page displays.
5 Click the Preview Now button located in the upper right corner of
the All-In-One Main Page. An image of the scanned item displays in the preview section.
6 Click and drag to select a specific area of the preview image to
7 Click See More Scan Settings to review and change the scan
8 Select your scan settings.
From the Send scanned image to: drop-down menu, select a program to send the scanned image to, or click the Creative Tasks section to display a list of projects.
Preview Now button Click to see a preview of the image. Scan Now button Click to scan the item on the scanner bed. Scan settings Adjust the settings for the scanned item.
Preview section See a preview of the image, and select an area to be scanned.
9 If you are sending the scanned image to a software program, click
Scan Now to complete the scan. If you are using the Creative Tasks section, follow the instructions on the computer screen. For a list of the Creative Tasks available from the All-In-One Main Page, see page 4.
Note: You can make a quick color or black and white copy. Press Color Copy or Black Copy on the control panel. To make black and white, gray, or color copies:
1 Open the top cover of the All-In-One.
2 Place the item you want to copy face down on the glass. Make sure
5 Click See More Copy Settings to review and change the copy
settings. The All-In-One Copy section expands:
Preview Now button Click to see a preview of the image. Copy Now button Click to copy your image.
Copy settings Adjust the settings for the copy. Preview section See a preview of the image, and select an area to be copied.
6 Select your copy settings.
Note: You may want to reduce or enlarge the image.
7 Click Copy Now. 15
The following steps lead you through sending a fax using the computer modem.
1 Open the top cover. 2 Place the item you want to fax face down on the glass. Make sure
3 Close the top cover. 4 Open the Lexmark All-In-One Center (see page 3). 5 From the Creative Tasks section of the All-In-One Main Page, click
Fax an image.
6 Follow the instructions on the computer screen.
Replacing the print cartridges
The Lexmark X1100 Series has been designed to print using the following cartridges.
Item: Standard yield black cartridge Standard yield color cartridge Moderate use black cartridge Moderate use color cartridge Part number: 17 27
Note: You can print using only the color cartridge, or with both a color cartridge and a black cartridge. For information about ordering supplies, see page 8. Before you install new or replacement print cartridges, remove the used cartridges.
1 Make sure the All-In-One is on. 2 Lift the scanner unit until the scanner support keeps it open.
The print cartridge carrier moves and stops at the loading position unless the All-In-One is busy.
3 Squeeze the tabs on the cartridge lids, and then lift the lids. 4 Remove the old cartridges. Store them in an air-tight container or
dispose of them.
5 If you are installing new cartridges, remove the stickers and
transparent tape from the bottom of the cartridges.
Warning: Do not touch the gold contact area on the cartridges.
6 Insert the new cartridge. Make sure the color print cartridge is
secure in the left carrier and then snap the lid closed. If you are installing a black print cartridge, make sure that it is secure in the right carrier, and then snap the lid closed.
7 Lift the scanner unit and push the scanner support back while
lowering the scanner unit until it is completely closed. Lexmarks All-In-One warranty does not cover repair of failures or damage caused by a refilled cartridge. We do not recommend use of refilled cartridges. Refilling cartridges can affect print quality and cause damage to the All-In-One. For best results, use Lexmark supplies.
This section helps you solve problems you may have with the All-In-One. Additional troubleshooting information is available in the Lexmark Solution Center. For help accessing the Lexmark Solution Center, see page 8.
Before you try to solve the problem, check the following: Is the power supply firmly attached to the All-In-One and an electrical outlet? Are both the computer and All-In-One on? Is the USB cable securely attached to the computer and the All-In-One? Did you remove the sticker and transparent tape from the print cartridge? For help, refer to the setup documentation. Is the color cartridge secure in the left carrier? Is the black print cartridge secure in the right carrier, if you installed both? Is the paper loaded correctly? Make sure you do not force the paper into the printer. Did you install the printer software correctly? For help, refer to the setup documentation. Is the Lexmark X1100 Series set as the default? To check, click Start Settings Printers. If not, you need to remove and then reinstall the software. For help, see page 26.
devices shown here, highlight them and then press the Delete key. Note: The Other Devices category displays only when unknown devices are present. Do not delete any Lexmark items unless they are present under the Other Devices category.
5 Insert the CD, and install the software again. Do not restart the
computer. For help, refer to the setup documentation.
All-In-One prints slowly 1 Close all programs not in use. The memory resources may be low. 2 Make sure the Print Properties Quality/Speed setting is set on
Normal or Quick Print. For help, see page 7.
3 Try printing a smaller file. If the memory resources are too low, you
may not be able to print larger files. Consider purchasing more memory. Note: Photographs typically have a larger file size. Try lowering the scanning resolution.
Print is too dark or smudged 1 Remove the paper as it exits. Let the ink dry before handling. 2 Adjust the Quality/Speed setting in Print Properties or in the
All-In-One Center. For help, see page 6 or page 4.
The Better or Best Quality/Speed setting may cause smearing if used with plain paper. Try using Normal.
3 Open the Lexmark Solution Center. For help, see page 8. 4 From the Maintenance tab, click Clean to fix horizontal streaks. Vertical lines are jagged or edges are not smooth 1 Adjust the Quality/Speed setting in Print Properties. For help, see
page 7. For best print quality, select Better or Best.
2 Align the print cartridges. To align the print cartridges:
a Open the Lexmark Solution Center. For help, see page 8. b From the Maintenance tab, click Align to fix blurry edges.
White lines appear in graphics or solid black areas
Clean the print cartridge nozzles. Going long periods without using the All-In-One can cause the print cartridge nozzles to become clogged. To clean the cartridge nozzles:
1 Open the Lexmark Solution Center. For help, see page 8. 2 From the Maintenance tab, click Clean to fix horizontal streaks. All-In-One has a paper jam 1 Follow the instructions on the screen for clearing the paper jam. 2 Make sure you are using paper designed for an inkjet printer. For a
list of recommended papers, see page 10.
3 Make sure you are correctly loading the paper. For help, see
4 Make sure the paper guide is against the left edge of the paper. For
help, see page 11.
Scanning, copying, and faxing troubleshooting
Scanning was not successful
The software may not be installed properly. Follow the instructions for All-In-One is not communicating with the computer on page 21.
Scanning or using a scanned image with a software program takes a long time or freezes the computer
Lower the scanning resolution. Scanning resolution is much different than printing resolution and is generally set much lower. To change the scanning resolution:
1 Open the Lexmark All-In-One Center. For help, see page 3. 2 From the Scan section, click See More Scan Settings. 3 Click Display Advanced Scan Settings. 4 From the Scan tab of Advanced Scan Settings, enter a lower scan
Edge of the copy does not print
Make sure the original is properly oriented on the glass. For help,
see page 13.
Make sure the area you want to copy is not larger than the printable
area of the page. Apply the Fit-to-page feature. To apply the Fit-to-page feature:
1 Open the Lexmark All-In-One Center. For help, see page 3. 2 From the Copy section, click See More Copy Settings. 3 From the Reduce/Enlarge section, click the second button, and
then select Fit to page from the corresponding drop-down menu.
4 Copy your document again.
Copy button on the control panel does not work
Make sure the computer is on. The computer must be on in order
for the All-In-One to work.
Make sure you properly installed the software. For help, refer to the
setup documentation. The software must be installed for the copier to work.
Fax function does not work
Make sure the computer and the All-In-One are on. Make sure the computer is connected to a phone line. A phone
connection is required for faxing to function.
The memory may be full. Wait until the faxes in memory have been
sent, and then send the current fax again.
Removing and reinstalling the software
If the All-In-One software is not functioning properly or a communications error message displays when you try to use the All-In-One, you may need to remove and then reinstall the printer software.
1 From the desktop, click Start
Lexmark X1100 Series
Programs Uninstall Lexmark X1100 Series.
Note: If Uninstall is not an option on the menu, see All-In-One is not communicating with the computer on page 21.
2 Follow the instructions on the computer screen to remove the
3 Restart the computer before reinstalling the software. 4 Insert the CD and follow the instructions on the computer screen to
install the software. For help, refer to the setup documentation.
Other help sources
If the preceding solutions do not solve the problem with your All-In-One:
Refer to the Lexmark Solution Center software for more
1 Click Start
Programs Lexmark X1100 Series Lexmark X1100 Series Solution Center.
2 Click the Troubleshooting tab on the left side of the screen. Visit our Web site at http://support.lexmark.com/ for help.
Electronic emission notices
Federal Communications Commission (FCC) compliance information statement The Lexmark 3100 Series 4476-K01 has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The FCC Class B limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult your point of purchase or service representative for additional suggestions. The manufacturer is not responsible for any radio or television interference caused by using other than recommended cables or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate this equipment. Note:To assure compliance with FCC regulations on electromagnetic interference for
a Class B computing device, use a properly shielded and grounded cable such as Lexmark part number 1329605 for parallel attach or 12A2405 for USB attach. Use of a substitute cable not properly shielded and grounded may result in a violation of FCC regulations. Any questions regarding this compliance information statement should be directed to:
Director of Lexmark Technology & Services Lexmark International, Inc. 740 West New Circle Road Lexington, KY 40550 (859) 232-3000
Japanese VCCI notice
Industry Canada compliance statement This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Avis de conformit aux normes dIndustrie Canada Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le matriel brouilleur du Canada. European Community (EC) directives conformity This product is in conformity with the protection requirements of EC Council directives 89/336/EEC and 73/23/EEC on the approximation and harmonization of the laws of the Member States relating to electromagnetic compatibility and safety of electrical equipment designed for use within certain voltage limits. A declaration of conformity with the requirements of the directives has been signed by the Director of Manufacturing and Technical Support, Lexmark International, S.A., Boigny, France. This product satisfies the Class B limits of EN 55022 and safety requirements of EN 60950. The United Kingdom Telecommunications Act 1984 This apparatus is approved under the approval number NS/G/1234/J/ 100003 for the indirect connections to the public telecommunications systems in the United Kingdom.
ENERGY STAR The EPA ENERGY STAR Office Equipment program is a partnership effort with office equipment manufacturers to promote the introduction of energy-efficient products and to reduce air pollution caused by power generation. Companies participating in this program introduce products that power down when they are not being used. This feature will cut the energy used by up to 50 percent. Lexmark is proud to be a participant in this program. As an ENERGY STAR Partner, Lexmark International, Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Advanced tab 9 All-In-One Center, see Lexmark All-In-One Center All-In-One Main Page Copy section 4 Creative Tasks section 4 Preview section 4 Scan section 4 All-In-One status 8
edition information ii electrical emission statement 27 emission statement 27 envelopes printing 6
I Want To menu 6 ink cartridges viewing ink levels of 8 ink levels viewing 8 inkjet paper 10 iron-on transfers 10 printing 6
labels 10 Lexmark All-In-One Center 3 opening 3 using 3 Lexmark Solution Center 8 Advanced tab 9 Contact Information tab 9 How To tab 8 Maintenance tab 8 opening 8 Printer Status tab 8 Troubleshooting tab 8 loading paper 10
faxing 16 FCC statement 27
banner printing 6 banner paper 10 banners printing 6 black and white, printing in 7 Black Copy button 2 both sides, printing on, see duplexing
glossy paper 10
hardware setup software setup 1 How To tab 8
card stock 10 cartridges viewing ink levels of 8 Color Copy button 2 Contact Information tab 9 control panel 2 copies 7 copy settings 4 copying 14 copyright advisory ii
I Want To change quality settings 6 change speed settings 6 print a banner 6 print a photo 6 print a poster 6 print an envelope 6 print on both sides of the paper 6 see more printing ideas 6
Maintain/Troubleshoot page 5 Maintenance tab 8 multiple copies 7
orientation, selecting 7
acceptable types of 10 loading 10 paper exit tray 1 Paper Feed button 2 paper guide adjusting 11 Paper Setup tab 7 parts of your All-In-One 1 photo paper 10 photos printing 6 scanning 13 poor quality printing 22 posters printing 6 Power button 2 Preview Now button 13 Preview section Preview Now button 13 Print/Copy preview 4 Scan preview 4 print cartridges viewing ink levels of 8 Print Layout tab 7 Print Properties 6 I Want To menu 6 opening 6 Options menu 7 Paper Setup tab 7 Print Layout tab 7 Quality/Copies tab 7 Save Settings menu 7 tabs 7 printing 10 banners 6 envelopes 6 photos 6 posters 6 Printing Status window changing appearance of 9
Quality/Copies tab 7
View Saved Images page 5 Open with. section 5 Print a Copy.section 5 voice notification turning on or off 9
reinstalling software 26 removing software 26
safety information ii Save Settings menu 7 saved images viewing 5 Scan button 2 scan settings 4 scanner unit 1 scanning 13 placing an item on the glass 13 settings, saving for future use 7 setup 1 setup troubleshooting 20 software reinstalling 26 removing 26 sound, see voice notification Status tab 8
For more help:
X1100 Series All-In-One
Turn your computer on.
1 Refer to your User's Guide. 2 Visit our Web site. http://support.lexmark.com/ 3 Call us at (859) 8253000. MondayFriday (9:00 AM9:00 PM EST) Saturday (Noon6:00 PM EST)
Phone number and support times may change without notice.
Connect the power supply.
Make sure the power light is on.
Lift the paper support, and extend the paper exit tray.
Load paper and adjust the paper guide.
Lift the scanner unit.
Safety information Use only the power supply provided with this product or the manufacturers authorized replacement power supply. Connect the power supply cord to an electrical outlet that is near the product and easily accessible. Refer service or repairs, other than those described in the user documentation, to a professional service person. CAUTION: Do not use the fax feature during a lightning storm. Do not set up this product or make any electrical or cabling connections, such as the power supply cord or telephone, during a lightning storm.
Remove the tape.
Insert the print cartridges.
Close the scanner unit.
Connect the USB cable.
Click Cancel on all Add New Hardware screens.
Insert the CD.
Follow the instructions on your computer screen.
P/N 17M0270 EC 7MLexmark International, Inc. All rights reserved.
TL-WN512AG LE32B535p7W WF-T1364TP Dell A940 RTT1055 DD-10 BM 2000 NP-P200 1250S ABS Edition SX-PR60 EMP-53 Icl-FR-dual IPF8000 DWC-LD1412 DCR-TRV130 Dymo 2000 Vivicam 3765 RS-BX601 GT4000 NRK-ORA-E CR-525 EP-BX6 Sbcru440 VP-L850 GT-S5600 PT-AE4000U Monitor ZC2551B P4V533-MX Hmgw1070 32LG5 Multimedia YC Fus 32 Motorola Q700 Suunto Core Edition 2171-20 AJ-D700 Mwdgce-25 1 CT-21Q41KE DVD-P548K AV-1086 Inspiron 1200 VGN-B100B Deluxe Khbf336HWF RD-175 GR-FXM37 KD-GS616R ED 221 RM-V12 Shotgun DPL2000 Finepix A345 3HT503B UE46C7705WS 2436VW Wings MG82CX MG10 2 Brain Pentax 645N Coolpix S4 RX-CW200 SCB-2408-D NV-HS800B KDC-MP5028 8398 PC BD-HP21U YP-U2Z TX-28PM11F Power 400 CDE-9850RI Server ERB36402W8 Abit IT7 Minolta 2060 W910I 2700C MY401C Transit 1200SI Majesty125-2006 PV-DV103D Digimax A402 PCG-GRV516G Tecra 9100 Review EA150crema Laptop QW104D RH Cappucino WD-80260T Laserfax 925 DSC-T2 EXR-5 KEX-P820RDS Beta 10 KD-G152 Scaleo 800
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101