lg_10_2619_1.pke

IP Link Device Interface Communication Sheet

Revision: 11/10/2006

This document provides additional assistance with wiring your Extron IP Link enabled product to your device. Different components may require a different wiring scheme than those listed below. For complete operating instructions, refer to the users manual for the specific Extron IP Link enabled product or the controlled device manufacturer supplied documentation.
Device Specifications: Device Type: Manufacturer: Firmware Version: Model(s): Display LG Electronics N/A 26LC2R, 27LC2R, 32LC2R, 32LC25R, 32LX2R, 37LE2R, 42LE2R, 32LC3R

Version History:

Driver Version Date IP Link Compiler IP Link Firmware GVC Version GC2 Version Notes

11/6/06

1.0.9.3

Initial beta version.

Driver Notes: - Driver is written using SET ID = 1. See manufacturer-supplied user manual for your monitor for instructions to set the ID to 1. -When On Screen Display is turned ON, only power status is available to prevent screen flash. -Auto Image is only available for RGB(PC) input. -Using the RGB-PC or Component input, you select either 16:9 or 4:3 screen aspect ratio.

Page 1 of 4

Control Commands & States: Aspect Ratio 4:3 Zoom 1 14:9 Audio Mute Auto Image IR Remote Input Off/On Execute Off AV1 AV4 RGB (PC) Low Power On Screen Display Power Video Mute Volume Volume Off Off Off Off 0 - 100 Up Down On AV2 Component HDMI On On On On AV3 RGB (DTV) Analog 16:9 Zoom 2 Full Spectacle Original

Page 2 of 4

Status Available: Aspect Ratio 4:3 Zoom 1 14:9 Audio Mute Connection Status IR Remote Input Off/On Connected Off AV1 AV4 RGB (PC) Low Power On Screen Display Power Video Mute Volume Off Off Off Off 0 - 100 Disconnected On AV2 Component HDMI On On On On AV3 RGB (DTV) Analog 16:9 Zoom 2 Full Spectacle Original

Page 3 of 4

Cable and Adapter Requirements: M/F RS-232 Null Modem Serial Cable F/F Gender Changer (Extron Electronics P/N 10-438-10) Notes for the Device:
Serial communication: Port Type: RS232 Baud Rate: 9600 Data Bits: 8 Parity: None Stop Bits: 1 Flow Control: None

Pin Assignments Diagram:

Note: Captive screw connector may also be used as a serial connection.

General Notes:

Page 4 of 4