STAND INSTALLATION (Only 26, 32, 37 inch LCD TV models)
Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage.
Assemble the product stand with the product as shown.
Install the 4 bolts securely, in the back of the product in the holes provided.
ATTACHING THE TV TO A WALL
This feature is not available for all models. Set it up close to the wall so the product doesnt fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesnt fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children dont climb on or hang from the product.
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall.
Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

! NOTE

When moving the product to another place undo the ropes first. Use a product holder or a cabinet that is big and strong enough for the size and weight of the product. G To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product.
BACK COVER FOR WIRE ARRANGEMENT
Hold the C A B L E M A N A G E M E N T with hands and push it as shown.

CABLE MANAGEMENT

Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section.
Reinstall the C A B L E M A N A G E M E N T as shown.
Install the C A B L E M A N A G E M E N T as shown.
Bundle the cables using the supplied twister holder. (This feature is not available for all models.)
How to remove the cable management
Hold the C A B L E M A N A G E M E N T with both hands and pull it upward.

Do not hold the C A B L E M A N A G E M E N T when moving the product. - If the product is dropped, you may be injured or the product may be broken.
The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally.

Power Supply

Short-circuit Breaker

GROUNDING

Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on each side from the wall.

4 inches

WALL MOUNT: HORIZONTAL INSTALLATION
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
4 inches 4 inches 4 inches
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

ANTENNA CONNECTION

For optimum picture quality, adjust antenna direction. I An antenna cable and converter are not supplied.

RF Coaxial Wire (75 ohm)

Outdoor Antenna
Single-family Dwellings /Houses AUDIO VIDEO VARIABLE (Connect toCOMPONENT IN outdoor antenna) wall jack for AUDIO OUT

Wall Antenna Socket

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

HDMI/DVI IN 1

Antenna

Signal Amplifier VHF

AUDIO In poor signal areas,to get better VIDEO picture quality, install aVARIABLE amplifier to the antenna as shown above. signal AUDIO OUT COMPONENT IN If signal needs to be split for two TVs,use an antenna signal splitter for connection.
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models.

HD RECEIVER SETUP

When connecting with a component cable
Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O jacks on the set.
Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O jacks on the set.
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.)
Select Component input source with using the I N P U T button on the remote control.
Signal 480i/576i 480p/576p 720p/1080i 1080p

Component Yes Yes Yes No

HDMI1/2 No Yes Yes Yes

(except VGA Models)

When connecting with a HDMI cable
Connect the HDMI output of the digital set-top box to the H D M I / D V I I N 1 or H D M I I N 2 jack on the set.
Select HDMI1 or HDMI2 input source with using the I N P U T button on the remote control.
TV can receive the video and audio signal simultaneously with using a HDMI cable. If the digital set-top box supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p. If the digital set-top box player does not support Auto HDMI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
When connecting with a HDMI to DVI cable
Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 jack on the set.
Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) jack on the set.
Select HDMI1 input source with using the I N P U T button on the remote control.

DVD SETUP

Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set.
Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O jacks on the set.
Turn on the DVD player, insert a DVD.
Refer to the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV

Y PB PR

PB B-Y Cb Pb

PR R-Y Cr Pr

Video output ports on DVD player
When connecting with a Euro Scart
Connect the Euro scart socket of the DVD to the A V 1 Euro scart socket on the set.
Select AV1 input source with using the I N P U T button on the remote control. If connected to AV2 Euro scart socket, select AV2 input source.

When connecting with a RCA cable
V Connect the A U D I O/V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)

VIDEO L/MONO

Select AV3 input source using the I N P U T button on the remote control.
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the set.
Connect the S-VIDEO output of the VCR to the S V I D E O input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the A U D I O input jacks on the set. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV3 input source with using the I N P U T button on the remote control.
If both S-VIDEO and VIDEO sockets have been conneced to the S-VHS VCR simultaneously, only the S-VIDEO can be received.

UDIO R

OTHER A/V SOURCE SETUP

Camcorder

Video Game Set
V Connect the A U D I O/V I D E O jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red)
Select AV3 input source with using the I N P U T button on the remote control.
Operate the corresponding external equipment. Refer to external equipment operating guide.

EXTERNAL STEREO

Use to connected either an external amplifier, or add a subwoofer to your surround sound system.
Connect the input jack of the stereo amplifier to the V A R I A B L E A U D I O O U T jacks on the set. Set up your speakers through your analog stereo amplifier, according to the instructions provided with the amplifier.
When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p. 6 3)

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting with a D-sub 15 pin cable

RGB OUTPUT

Connect the RGB output of the PC to the R G B ( P C) jack on the set.
Connect the PC audio output to the A U D I O jack on the set.
Turn on the PC and the set.
Select RGB PC input source with using the I N P U T button on the remote control.
To enjoy vivid picture and sound,connect a PC to the set. G Avoid keeping a fixed image on the set s screen for a long period of time.The fixed image may become permanently imprinted on the screen;use a screen saver when possible. Connect PC to the RGB (PC) port of the G set;change the resolution output of PC accordingly. G There might be noise according to some resolution,vertical pattern,contrast or brightness in PC mode.Change the PC mode into another resolution or change the refresh rate into another rate or adjust the brightness and contrast on the menu until the picture is clean.If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card.

When using the remote control, aim it at the remote control sensor on the TV.
INPUT TV INPUT MODE TV DVD RATIO SIMPLINK SLEEP TEXT VCR I/II
POWER Switches the set on from standby or off to standby. TV INPUT Returns to the TV viewing from any mode. Switches the set on from standby. INPUT If you press the button once, the input source OSD will appear on screen as shown. Press the D / E button and then OK button to select the desired input source (TV, AV1 , AV2, AV3, Component , RGB PC, HDMI1 or HDMI2). RATIO Selects your desired picture format.

LIST EXIT

Q.VIEW
Brightness Adjusts screen brightness. adjustment It returns to the default settings brightness by changing mode source. SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(G p. 4 4) SLEEP Sets the sleep timer.
I/II Selects the sound output. Coloured These buttons are used for teletext (only T E L E T E X T buttons models) or P r o g r a m m e e d i t.
VCR/DVD Controls some video cassette recorders or DVD players control buttons when you have already selected DVD or VCR mode button. Control connected AV devices by pressing the D / E / F / G, O K buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip. (The button does not provide such functions.) EXIT Clears all on-screen displays and returns to TV viewing from any menu. LIST Displays the programme table. MENU Selects a menu. Q.VIEW Returns to the previously viewed programme.

TIME SIZE

HOLD UPDATE INDEX

REVEAL

No function

INPUT TV INPUT

MODE TV DVD
MODE Selects the remote operating modes.
TELETEXT These buttons are used for teletext. BUTTONS For further details, see the Teletext section.
RATIO SIMPLINK SLEEP TEXT

VCR I/II

THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left the system settings to your preference.

Right)

OK Accepts your selection or displays the current mode.
VOLUME Adjusts the volume. UP/DOWN
FAV Displays the selected favourite programme. MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN
0~9 number Selects a programme. buttons Selects numbered items in a menu.

Installing Batteries

Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AA batteries. Dont mix old or used batteries with new ones. Close cover.

TURNING ON THE TV

If your TV will be turned on, you will be able to use its features.
First, connect power cord correctly. At this moment, the TV switches to standby mode. I In standby mode to turn TV on, press the , I N P U T, P R D / E button on the TV or press the P O W E R, T V, I N P U T, P R + / -, N U M B E R( 0~9 ) buttons on the remote control and then the TV will 9 switch on.

PROGRAMME SELECTION

Press the P R + / - or N U M B E R buttons to select a programme number.

VOLUME ADJUSTMENT

Press the V O L + / - button to adjust the volume. If you want to switch the sound off, press the M U T E button. You can cancel the Mute function by pressing the M U T E, V O L + / - or I / I I button.
ON SCREEN MENU SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. The OSD mainly use pictures for the Plasma TV models.
Press the M E N U button and then D / E button to display each menu. Press the G button and then D / E button to select a menu item. Change the setting of an item in the sub or pull-down menu with F / G button. You can move to the higher level menu by pressing the O K or M E N U button.
Setup Auto Tuning Manual Tuning Programme Edit Favourite Programme
Audio Sound Mode Auto Volume Balance TV Speaker

Setup MENU

Picture MENU

Audio MENU

Option Language Country SIMPLINK Key Lock ISM Method Low Power
* This feature is not available in all countries.
Clock Off Time On Time Sleep Time Auto Sleep

* PLASMA TV models only

Option MENU

Time MENU

a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation. b. In this manual, the OSD (On Screen Display) may be different from your TVs because it is just example to help the TV operation. c. In the teletext mode, menus are not displayed.

AUTO PROGRAMME TUNING

Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR +/- or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
VOL LIST EXIT MENU Q.VIEW
Press the M E N U button and then D / Setup menu. Press the G button and then D / Tuning. Press the G button and then D /

E button to select the

E button to select Auto
E button to select System.
Press the D / E button to select a TV system menu; BG: PAL B/G, SECAM B/G (Europe / East Europe / Asia / NewZealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) L : SECAM L/L (France) M : (USA / Korea / Philippines) (option) Press the D /

FINE TUNING

Normally fine tuning is only necessary if reception is poor.
Press the M E N U button and then D / the Setup menu.
Press the G button and then D / Manual Tuning.
Press the G button and then D /

button to select Fine.

Press the G button and then the best picture and sound.

button to fine tune for

Setup Auto Tuning Manual Tuning Manual Tuning Programme Edit Favourite Programme
Press the O K button to store it.

ASSIGNING A STATION NAME

You can assign a station name with five characters to each programme number.
Press the G button and then D / Name.
Press the G button and then D / E button. You can use a blank, + , - , the number 0 to 9 and the alphabet A to Z.
Auto Tuning Manual Tuning Manual Tuning Programme Edit Favourite Programme
Press the F / G button to select the position and make your choice of the second character, and so on.

PROGRAMME EDIT

This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number.
Press the M E N U button and then D / the Setup menu. Press the G button and then D / Programme Edit.
Press the G button to display the Programme edit menu.
Deleting a programme 1.Select a programme to be deleted with the D / E / F / button. 2.Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position.
Copying a programme 1.Select a programme to be copied with the D / E / F / G button. 2.Press the GREEN button. All the following programmes are shifted down one position.
Setup Auto Tuning Manual Tuning Programme Edit Programme Edit Favourite Programme
Moving a programme 1.Select a programme to be moved with the D / E / F / G button. 2.Press the YELLOW button. 3.Move the programme to the desired programme number with the D / E / F / G button. 4.Press the YELLOW button again to release this function. Skipping a programme number 1.Select a programme number to be skipped with the D / E / F / G button. 2.Press the BLUE button. The skipped programme turns to blue. 3.Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.

This operates only for the devices with the SIMPLINK logo. Please check the SIMPLINK logo. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not want SIMPLINK menu, select Off.
Press the M E N U button and then D / Option menu.
Press the G button and then D / PLINK.
button to select SIMOption Language Country SIMPLINK Key Lock ISM Method Low Power

SIMPLINK Functions

Disc playback Control connected AV devices by pressing the D / E / F / G, O K buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.(The button does not provide such functions) Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of AV devices connected to TV and play it. Power off all devices When you power off TV, all connected devices are turned off. Switch audio-out Offers an easy way to switch audio-out.
* A device, which is connected to TV through HDMI cable but does not support SIMPLINK, does not provide this function.

SIMPLINK Menu

Press the D / E /
/ G button and then OK button to select the desired SIMPLINK source.
T V v i e w i n g : Switch to the previous TV programme regardless of the current mode.
D I S C p l a y b a c k : Select and play discs. When multiple discs are available, the titles of the discs are conveniently displayed at the bottom of the screen. V C R p l a y b a c k : Play and control the connected VCR. H D D R e c o r d i n g s p l a y b a c k : Play and control recordings stored in HDD. Audio Out to Home theater/Audio Out to TV : Select Home theater or TV speaker for Audio Out.
DISC DVD HTS VCR HDD Recorder

Selected Device

When no device is connected (displayed in gray) When a device is connected (displayed in bright colour)

SPEAKER F TV Speaker

Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G After connecting the HDMI terminal for the home theater with SIMPLINK function in the above method, connect the VARIABLE AUDIO OUT terminal on the back of the TV to the VARIABLE AUDIO IN terminal on the back of the SIMPLINK device with the VARIABLE AUDIO OUT cable. G When operating the external device with SIMPLINK, press the TV button among the MODE button on the remote controller. G When you switch the Input source with the INPUT button on the remote controller, you can stop the operation of device controlled by SIMPLINK. G When you select or operate the media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker).

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO)CONTROL
You can watch the screen in various picture formats; S p e c t a c l e, F u l l, O r i g i n a l, 4 : 3, : 9, : 9 and Z o o m 1 / 2. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. There might be uncomfortable in full mode. Then change into other mode.
LIST EXIT MENU Q.VIEW INPUT TV INPUT POWER MODE TV DVD RATIO SIMPLINK SLEEP TEXT VCR I/II
You can adjust the enlarge proportion using D / This function works in the following signal.

button.

Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the Picture menu.
Spectacle When your TV receives the wide screen signal, when selected it will adjust the picture horizontally, in non-linear proportion, to fill the entire screen.
Original When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.

Spectacle

Original
Full When your TV receives the wide screen signal, when selected it will adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully.
4:3 Following selection will lead you to view a picture with an original 4:3 aspect ratio, with gray bars appearing at both the left and right sides.
16:9 Following selection will lead you to adjust the picture horizontally, in a linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs).
Zoom1 Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bottom portions of the picture will be cropped.
14:9 You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode. The screen 14:9 is viewed just like that the screen 4:3 is magnified to the left / right.
Zoom2 Choose Zoom2 when you want the picture to be altered, both horizontally extended and vertically cropped. The picture taking a halfway trade off between alteration and screen coverage.
You can only select 4 : 3, : 9 (Wide) in Component, RGB, HDMI mode only.

PRESET PICTURE SETTINGS

Picture Mode-Preset
Dynamic Standard Mild User1/2 Select this option to display with a sharp image. The most general and natural screen display status. Select this option to display with a mild image. Select this option to use the user-defined setting.

Press the M E N U button and then D / the Picture menu.
Press the G button and then D / E button to select Picture Mode.
Press the G button and then D / E button to select Dynamic, Standard, Mild, User1 or User2.
Press the E X I T button to return to normal TV viewing. Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the P i c t u r e M o d e menu based on the programme category. Dynamic, Standard and Mild are programmed for optimum picture reproduction at the factory and cant be changed.
Dynamic Standard Mild User1 User2
Auto Colour Tone Control(Warm/Medium/Cool)
To initialize values (reset to default settings), select the Cool option.

LIST MENU Q.VIEW

Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. U Its available to use this function in U s e r 1 / 2 of Picture mode only.
Press the G button and then D / Colour Temperature.
Press the G button and then D / E button to select either Cool, Medium, Warm or User.
Picture Picture Mode Colour Temperature Cool Medium Warm User
XD Advanced Aspect Ratio Picture Reset Screen XD Demo
MANUAL PICTURE ADJUSTMENT

Picture Mode-User Option

Contrast Brightness Colour Sharpness Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels.
Press the G button and then D / or User2.

button to select User1

Press the G button and then D / E button to select the desired picture option (Contrast, Brightness, Colour, Sharpness and Tint).
User 1 Contrast Contrast Brightness Colour Sharpness Tint Contrast
You cant adjust colour, sharpness and tint in the RGBPC mode to the levels you prefer.
Colour Tone - User Option

To adjust red, green, blue to any colour temperature you prefer. U Its available to use this function in U s e r 1 / 2 of Picture mode only.

button to select User.

Press the G button and then D / E button to select Red, Green or Blue.

Cool Medium Warm User

User Red Green Blue +0
- PICTURE IMPROVEMENT TECHNOLOGY
XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. Its not available to use this function in RGB-PC mode.

EXIT LIST Q.VIEW

Press the MENU button and then D / the Picture menu. Press the G button and then D / Press the G button and then D / Auto or Manual.

E button to select XD.

* Selecting the Manual
This menu is activated after selecting the User1 or User2 of P i c t u r e M o d e.
Press the G button and then D / E button to select X D Contrast, XD Colour or XD NR. Press the G button and then D / Off.

Auto Manual

Manual
X D C o n t r a s t : Optimizing the contrast automatically according to the brightness of the reflection. A X D C o l o u r : Adjusting the colours of the reflection automatically to reproduce as closely as possible to the natural colours. A X D N R : Removing the noise up to the point where it does not damage the original picture. (Its not available to use this function in HDMI, Component (except 480i/576i), RGB-PC mode.)
XD Contrast XD Colour XD NR
Use it to see the difference between XD Demo on and XD Demo off.
Its not available to use this function in RGB[PC] mode.
Press the MENU button and then D / the Picture menu.

E button to select XD

Press the G button to begin XD Demo.
To stop X D D e m o, press the M E N U button.

To Start

XD Demo

XD Off XD On

MENU Exit

ADVANCED - CINEMA

Set up the TV for the best picture appearance for viewing movies. This feature operates only in Analog TV, AV, S-video and Component 480i/576i mode.
E button to select Advanced.
E button to select Cinema.
E button to select On or Off.
Advanced Cinema Cinema Black Level
ADVANCED - BLACK(DARKNESS) LEVEL
When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen.
This function works in the following mode: AV (NTSC-M), SVideo (NTSC-M) or HDMI.
Press the G button and then D / Advanced.
Press the G button and then D / Level.

button to select Black

Press the G button and then D / or High.

Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. Off time function overrides On time function if they are set both to the same time. The set must be in standby mode for the On timer to work.
Press the G button and then D / Time/On Time.

button to select Off

Press the G button and then D / E button to select On. To cancel On/Off Time function, select Off.

-- : -Off

Press the G button and then D / minutes.
Time Clock Off Time On Time Sleep Time Auto Sleep
For only On Time function P r o g r a m m e: Press the G button and then D / E button to select the programme. V o l u m e: Press the G button and then D / E button to adjust volume level at turn-on.

07:00 PR Vol. On

SLEEP TIMER SETTING
You dont have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed.
Press the S L E E P button repeatedly to select the number of minutes. The display - - - will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.
When the number of minutes you want is displayed on the screen, the timer begins to count down from the number of minutes selected.
You can also set up the Sleep Time in the Time menu.
Time Clock Off Time On Time Sleep Time Auto Sleep Time Clock Off Time On Time Sleep Time Auto Sleep
To view the remaining sleep time, press the S L E E P button once. To cancel the sleep time, repeatedly press the S L E E P button until the display When you switch the set off, the set releases the preset sleep time.

- - - appears.

AUTO SHUT-OFF SETTING
If set to on and there is no input signal, the TV turns off automatically after 10 minutes.
Press the G button and then D / Sleep.
This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.

A TIME

When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, P R + / - or NUMBER buttons. Press again to exit this function.

A HOLD

Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited. To continue press this button again.

TROUBLESHOOTING

The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. I Are batteries installed with correct polarity (+ to +, - to -)? I Correct remote operating mode set: TV, VCR etc.? I Install new batteries.
The remote control doesnt work
Power is suddenly turned off
Is the sleep time set? I Check the power control settings. Power interrupted I No broadcast on station tuned with Auto off activated.
The video function does not work. Check whether the product is turned on. I Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet? I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in.
No picture & No sound
P i c t u r e a p p e a r s s l o wly after switching on
This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes.
No or poor colour or poor picture
Adjust Colour in menu option. Keep a sufficient distance between the product and the VCR. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly? I Activate any function to restore the brightness of the picture.