Users Guide Specification

1. Model Description

MODEL 32/37/42LC7D-UK

42/50PC5D-UL

Park SY 07.06.29

KANG KWANG SUK 07.06.29

BRAND Product Name
LG Part No. 32/37/42LC7D, 42/50PC5D MFL34797033 (0807-REV04)

SUFFIX

Printing Specification 1. Trim Size (Format) : 185mm x 260 mm 2. Printing Colors Cover : 1 COLOR (BLACK) Inside : 1 COLOR (BLACK) 3. Stock (Paper) Cover : Coated paper , S/White 150 g/ Inside : Uncoated paper , 60 g/ 4. Printing Method : Off set 5. Bindery : Saddle stitch 6. Language : English (1) 7. Number of pages : 32

N O T E S

This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification. (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. (2) Especially, Dont use or contain lead(Pb) and cadmium(Cd) in ink.

Special Instructions

* LGENT : Printed in China * LGENP : Printed in China * LGEIL : Printed in India * LGEDI : Printed in Indonesia * LGEIN : Printed in Indonesia * LGEMA : Printed in Poland * LGETH : Printed in Thailand * LGEWA : Printed in U.K. * LGEVN : Printed in Vietnam * LGEEG : Printed in Egypt * LGERA : Printed in Russia * LGEAK : Printed in Kazakhstan

(1) Origin Notification

* LGEMX : Printed in Mexico * LGERS : Printed in Mexico * LGEAZ : Printed in Brazil * LGESP : Printed in Brazil * LGESY : Printed in China

REV. NO.

Changes
Jul./01/08 Jan./09/07 Nov./01/07 Sep./14/07
Yang Hyo-Mi Park sun young Park sun young Park sun young
S8-24394 S8-05245 S7-97591 S7-95015 CHANGE NO.
Added the model name and corrected the safety instruchions Changed inch form. Changed antenna contents and Simplink function.
Applied PQ test results. CHANGE CONTENTS

MM/DD/YY

SIGNATURE

Pagination sheet

Front cover
P/NO.MFL34797033 Total pages : 32 pages

Rear cover

LG(EN) Blank page LG
MFL34797033-en-simple 1/20/04 12:34 AM Page 1
LCD TV PLASMA TV OWNERS MANUAL
LCD TV MODELS 32LC7D 32LC7DC 37LC7D 42LC7D 32LG10 PLASMA TV MODELS 42PC5D 42PC5DC 50PC5D 50PC5DC
Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
An extended owners manual that contains information on the advanced features of these LG TV sets is located on the CD-ROM provided in an electronic version. To read these files, you will need to use personal computer (PC) equipped with a CD-ROM drive.
P/NO : MFL34797033 (0807-REV04) Printed in Korea
www.lgusa.com / www.lgcommercial.com
MFL34797033-en-simple 1/20/04 12:34 AM Page 2

WARNING / CAUTION

To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

FCC NOTICE

Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
MFL34797033-en-simple 1/20/04 12:34 AM Page 4
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not make the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.
ANTENNAS Outdoor antenna grounding If an outdoor antenna is installed, follow the precautions below. An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can come in contact with such power lines or circuits as death or serious injury can occur. Be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code (NEC) in the U.S.A. provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode. Antenna grounding according to the National Electrical Code, ANSI/NFPA 70

Ground Clamp

Antenna Lead in Wire
WARNING - To reduce the risk of fire or electrical shock, do not expose this product to rain, moisture or other liquids. Do not touch the TV with wet hands. Do not install this product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning.
Antenna Discharge Unit (NEC Section 810-20) Grounding Conductors (NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System (NEC Art 250, Part H)
Electric Service Equipment
NEC: National Electrical Code
Do not expose to dripping or splashing and do not place objects filled with liquids, such as vases, cups, etc. on or over the apparatus (e.g. on shelves above the unit).
Cleaning When cleaning, unplug the power cord and scrub gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners or benzene. Moving Make sure the product is turned off, unplugged and all cables have been removed. It may take 2 or more people to carry larger TVs. Do not press against or put stress on the front panel of the TV. Ventilation Install your TV where there is proper ventilation. Do not install in a confined space such as a bookcase. Do not cover the product with cloth or other materials (e.g.) plastic while plugged in. Do not install in excessively dusty places. If you smell smoke or other odors coming from the TV or hear strange sounds, unplug the power cord contact an authorized service center.

GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock (i.e. a TV with a three-prong grounded AC plug must be connected to a three-prong grounded AC outlet). If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Power Supply Short-circuit Breaker
DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable. Keep the product away from direct sunlight.
On Disposal (Only Hg lamp used LCD TV)
The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out in accordance to the regulations of your local authority.
MFL34797033-en-simple 1/20/04 12:34 AM Page 5

CONTENTS

WARNING / CAUTION. 2 SAFETY INSTRUCTIONS. 3 PREPARATION
Accessories. 6 Front Panel Information.7 Back Panel Information. 8 Remote Control Functions. 10 Back Cover for Wire Arrangement. 12 Attaching the TV to a wall. 14 Desktop Pedestal Installation. 14 Stand Installation. 15 VESA Wall Mounting. 15 Antenna or Cable Connection. 16 VCR Setup. 19 PC Setup. 20

WATCHING TV

Turning On TV. 21 Channel Selection. 21 Volume Adjustment. 21 Channel Search. 22 On-Screen Menus Selection. 23

APPENDIX

Troubleshooting. 26 Maintenance. 28 Product Specifications. 29 Open Source Software Notice. 30

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup. 17 DVD Setup. 1 8
HOW TO USE THE OWNER'S MANUAL ON THE CD-ROM
To view the Owner's Manual on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The ACRORD" folder on the CD-ROM contains the installation programs for them. If you want to install those programs, Open the My Computer Open the LG Open the ACRORD double-click your language.
TO VIEW THE OWNER'S MANUAL ON THE CD-ROM
The Owner's Manual files are included in the supplied CD-ROM. Load the supplied CD-ROM into the CD-ROM drive of your PC. After a while, the web page of the CD-ROM will open automatically. (for Window only)
When you select your product, display the PDF file.

You can find the desired contents easily using the bookmark.

! NOTE

If the web page does not appear automatically, open the Owner's Manual file directly. Open the My computer Open the LG Open the index.htm file.
MFL34797033-en-simple 1/20/04 12:34 AM Page 6

PREPARATION

ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product. The accessories can be different from the figures shown here. For further information, see the the Owner's Manual files supplied CD-ROM.

HT IG BR

RA TIO

SIMPL INK

DV MO D CA DE BL E

IN PU T

R VC B ST

TI ME R

MU TE FA V

1.5V 1.5V

Copyright 2007 LGE, All Rights Reserved.

Owners Manual

CD Manual (Refer to p.5)
Remote Control, Batteries

Power Cord

* Slightly wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on surface of the exterior.
75ohm Round Cable (This feature is not available for all models)

For Plasma TV models

Polishing Cloth
* Do not wipe roughly when removing stain. Please be cautions of that excessive pressure may cause scratch or discoloration.

Option Extras

This feature is not available for all models
2-Eye-bolts (Refer to p.14)
2-Wall brackets (Refer to p.14)

D-sub 15 pin Cable

For LCD TV models
32LC7D/7DC, 37LC7D, 32LG10 only

Cable Management

2- TV Bracket Bolts (Refer to p.14)
2- TV Brackets, 2- Wall Brackets (Refer to p.14)

Twist Holder

Arrange the wires with the twist holder.
4-Bolts for stand assembly (Refer to p.15)
MFL34797033-en-simple 1/20/04 12:34 AM Page 7

FRONT PANEL INFORMATION

Here shown may be somewhat different from your TV. NOTE: If your product has a protection tape attached, remove the tape. And then wipe the product with a cloth (If a polishing cloth is included with your product, use it).

Front Panel Controls

Plasma TV Model
Power/Standby Indicator Illuminates red in standby mode. Illuminates green when the set is switched on.

Remote Control Sensor

INPUT ENTER

MENU VOL

ENTER CH

POWER Button

INPUT Button

MENU Button

ENTER Button

VOLUME (F,G)Buttons

CHANNEL (E,D)Buttons

LCD TV Model

MFL34797033-en-simple 1/20/04 12:34 AM Page 11
POWER Turns your TV or any other programmed equipment on or off, depending on the mode.
TV INPUT In AV 1-2, Component 1-2, RGB-PC, HDMI1, and HDMI2 input sources, screen returns to the last TV channel. INPUT External input modes rotate in regular sequence: TV, AV1-2, Component 1-2, RGB-PC, HDMI1 and HDMI2. (AV 1-2, Component 1-2, RGB-PC, HDMI1, and HDMI2 input sources are linked automatically, only if a device is connected.)

Inside the Sliding Cover

PICTURE ADJUST SOUND SAP
PICTURE Selects the factory preset picture depend on the viewing environment. SOUND Selects the factory preset sound for type of program. SAP Analog mode: Selects MTS sound (Mono, Stereo, or a SAP) DTV mode: Changes the audio language.
CC Select a closed caption. ADJUST Adjust the screen resolution, position, size and phase.

Installing Batteries

Remote control effective range

TV INPUT INPUT

Open the battery compartment cover on the back side and install the batteries matching correct polarity (+ with +, - with -). Install two 1.5V AA batteries. Dont mix old or used batteries with new ones. Close cover.

BRIGHT BRIGHT

BRIGHT
Use a remote control up to 7 meters distance and 30 degree (left/right) within the receiving unit scope. Dispose of used batteries in a recycle bin to preserve environment.
MFL34797033-en-simple 1/20/04 12:34 AM Page 12
BACK COVER FOR WIRE ARRANGEMENT
Hold the CABLE MANAGEMENT with both hands and pull it backward as shown.

CABLE MANAGEMENT

Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
Install the CABLE MANAGEMENT as shown.
MFL34797033-en-simple 1/20/04 12:34 AM Page 13

LCD TV Model PREPARATION

Bundle the cables using the supplied TWISTER HOLDER. (This feature is not available for all models.)
Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be broken.

TWISTER HOLDER

How to remove the CABLE MANAGEMENT
Hold the CABLE MANAGEMENT with both hands and pull it backward.
MFL34797033-en-simple 1/20/04 12:34 AM Page 14
ATTACHING THE TV TO A WALL
This feature is not available for all models. Here shown may be somewhat different from your TV. We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children dont climb on or hang from the TV.
Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture. * If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) to the wall. Match the height of the bracket that is mounted on the wall to the holes in the product. Ensure the eye-bolts or brackets are tightened securely.

Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on all four sides from the wall.
4 inches 4 inches 4 inches 4 inches
Ensure adequate ventilation by following the clearance recommendations.
MFL34797033-en-simple 1/1/04 6:57 AM Page 15
STAND INSTALLATION (Only 32LC7D/7DC, 37LC7D, 32LG10)
Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage.
Assemble the product stand with the product as shown.
Securely install the 4 bolts provided.

VESA WALL MOUNTING

This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket.

600 mm

600 mm (32LC7D/7DC,32LG10 only: 200 mm)

400 mm

400 mm (32LC7D/7DC,32LG10 only: 100 mm)
Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide.
MFL34797033-en-simple 1/20/04 12:34 AM Page 16
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box Connections. For optimum picture quality, adjust antenna direction if needed.
Outdoor Antenna (VHF, UHF)
RF Coaxial Wire (75 ohm) Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)
Copper Wire Be careful not to bend the bronze wire when connecting the antenna.

2. Cable

Cable TV Wall Jack

RF Coaxial Wire (75 ohm)

Antenna

Signal Amplifier

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. I If the antenna is not installed properly, contact your dealer for assistance. ( )
The TV will let you know when the analog, cable, and digital channel scans are complete.

Wall Antenna Socket

Multi-family Dwellings/Apartments (Connect to wall antenna socket)
MFL34797033-en-simple 1/20/04 12:34 AM Page 17
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for LCD TV model.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
When connecting Component cable
MI IN RGB(PC) AUDIO (RGB/DVI) R

SERVICE CON

1. How to connect
Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O 1 jacks on the set.

R (CONT

/DVI IN

2. How to use

Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box. operation) Select C o m p o n e n t 1 input source by using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select C o m p o n e n t 2 input source. Component 1/2 Yes Yes Yes Yes Yes HDMI1/DVI, HDMI2 No Yes Yes Yes Yes 1280x720p 1920x1080i Y, CB/PB, CR/PR Resolution 720x480i 720x480p Horizontal Frequency(KHz) 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 Vertical Frequency(Hz) 59.94 60.00 59.94 60.00 59.94 60.00

( 59.94 60.00 )

Y PB PR L R
Signal 480i 480p 720p 1080i 1080p

1920x1080p

23.976 24.00 29.97 30.00 59.94 60.00
MFL34797033-en-simple 1/20/04 12:34 AM Page 18

DVD SETUP

Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the set.

I/DVI IN

COMPONENT IN 2
Turn on the DVD player, insert a DVD. Select C o m p o n e n t 1 input source by using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select C o m p o n e n t 2 input source. Refer to the DVD player's manual for operating instructions.
When connecting HDMI cable
Connect the HDMI output of the DVD to the H D M I / D V I I N 1 or H D M I I N 2 jack on the set. No separated audio connection is necessary. ( ) HDMI supports both audio and video.

AUD (RGB/

COMPONENT I

HDMI/DVI IN

Select H D M I 1 or H D M I 2 input source by using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.

RGB IN HDMI IN

AUDIO (RGB/DVI)
Turn on the PC and the TV. Select HDMI1 input source by using the I N P U T button on the remote control.
Supported Display Specifications
RGB-PC, HDMI1/DVI-PC mode

DVI-PC OUTPUT AUDIO

Resolution 640x350 720x400 640x480 800x600 1024x768 1280x768 1360x768 1366x768
Horizontal Frequency(KHz) 31.469 31.469 31.469 37.879 48.363 47.776 47.720 47.130
Vertical Frequency(Hz) 70.08 70.08 59.94 60.31 60.00 59.87 59.799 59.65 * RGB-PC mode only
Depending on graphic card and signal status, there can be some shaking to find best picture in a little time.

* LCD TV only

MFL34797033-en-simple 1/20/04 12:34 AM Page 21

TURNING ON TV

DVD MODE
First, connect power cord correctly. At this moment, the TV switches to standby mode. I In standby mode to turn TV on, press the , INPUT, C H (D or E) button on the TV or press the POWER, INPUT, TV INPUT, C H (D or 9 E), Number (0~9 ) button on the remote control. Select the viewing source by using the TV INPUT, INPUT button on the remote control. I This TV is programmed to remember which power state it was last set to, even if the power cord is out. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.

SAP CC

PICTURE
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

CHANNEL SELECTION

Press the C H (D or E) or NUMBER buttons to select a channel number.

VOLUME ADJUSTMENT

Adjust the volume to suit your personal preference.
Press the V O L (D or E) button to adjust the volume.
If you want to switch the sound off, press the M U T E button.
You can cancel the Mute function by pressing the MUTE or V O L (D or E) button.
MFL34797033-en-simple 1/20/04 12:34 AM Page 22

CHANNEL SEARCH

Auto Scan (Auto Tuning)
Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes. A password is required to gain access to Auto Tuning menu if the Lock System is turned on.

BRIG HT +

Auto Tuning
Press the M E N U button and then use D or E button to select the S E T U P menu.
Manual Tuning Channel Edit
Press the G button and then use D or E button to select A u t o T u n i n g.
Press the E N T E R button to begin the channel search. Allow A u t o T u n i n g to complete the channel search cycle for A N T E N N A and C A B L E.
Auto Tuning Manual Tuning Channel Edit
Selection ( G or ) leads you to the Auto Tuning screen.

Processing Auto Tuning.

Selection ( G or ) leads DTV Ch.23 you to the Auto Tuning Found Channel(s): 16 screen.
Analog TV antenna Digital DTV antenna Analog CATV cable Digital CADTV cable
Press to stop the current scan and start ANALOG ANTENNA channel scan.

MENU Prev

MFL34797033-en-simple 1/20/04 12:34 AM Page 23
ON-SCREEN MENUS SELECTION
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Press the M E N U button and then use D or E button to select the each menu. Press the G button and then use D
button to display the available menus.
All available TV channels are searched and stored automatically. User can do manual channel selection and add or delete individual channels. You can add or delete in the channel list.

PICTURE Picture Mode

Picture Mode Color Temperature XD Advanced Aspect Ratio Picture Reset Screen : 16:9 : User1 : Cool
Select the preset value in the Picture Mode menu based on the program category: Dynamic, Standard, Mild, User1, User2. Choose one of three automatic color adjustments : Cool, Medium, Warm, User

Color Temperature

It is LG Electronics unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. I Select Auto or Manual (XD Contrast, XD Color, XD Noise).

Advanced

Cinema 3:2 Mode (On, Off) Set up the TV for the best picture appearance for viewing movies. I Black Level (Low, High) Adjusting the contrast and the brightness of the screen using the black level of the screen.

Aspect Ratio

Select the desired picture format. : Set by program, 4:3, 1 6:9, Zoom1, Zoom2, Just Scan. Use to quickly reset all the Picture menu options to their original factory preset values. Adjust the screen Resolution, Position, Size, Phase, Reset.

Picture Reset Screen

MFL34797033-en-simple 1/20/04 12:34 AM Page 24
Sound Mode Auto Volume Balance TV Speaker : Standard : On :0 : On I I

Sound Mode

Sound Mode lets you enjoy the best sound without any special adjustment. : Standard, Music, Movie, Sports and User Scans for changes in sound levels during commercials, then adjusts the sound to match the specified audio level. Adjust the left/right sound of speaker. Turn the TV speaker On or off.

Auto Volume

Clock Off Time On Time Sleep Time Auto Sleep : Oct 19, 2006, 03:44 AM : Off : Off : Off : Off

Balance TV Speaker

Auto: The time is set automatically from a digital channel signal. Select your viewing area time zone. Select Auto, Off, On depending on whether or not your viewing area observes Daylight Saving time. Manual: Set the clock manually. Select On or Off. Select On or Off. Select the amount of time before your TV turns off automatically: Off, 10, 20, 30, 60, 90, 120, 180, 240. TV will be automatically turned off, in case of no signal for 10 minutes.
Off Time On Time Sleep Time Auto Sleep
MFL34797033-en-simple 1/20/04 12:34 AM Page 25

OPTION

Language Input Label SimpLink Key Lock Caption ISM Method Low Power Set ID : Off : Off : Off : Orbiter : Off :1 : English
Language Input Label SimpLink
Select your desired language for on screen menus : English, Spanish, French. Set a label to each input source. Control and play other AV devices connected to the TV through HDMI cable without additional cables and settings. This feature can be used to prevent unauthorized viewing by locking out the front panel controls.

key Lock

Plasma TV model only

Caption

Mode: When selecting Off, Submenus for Analog, DTV, and Digital Option become disabled. I Analog: CC1~ CC4 , Text1~ Text4. I Digital: Service1~ Service6 I Digital Option: Customize the DTV/CADTV captions that appear on your screen.
ISM Method Low Power Set ID
Use it to minimize any fixed image on the screen. : Normal, Orbiter, Inversion, White Wash. Reduces the plasma display power consumption. Choose the desired TV ID number.

For USA

Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block : Off
Lock System Set Password Block Channel Movie Rating TV Rating-Children

I I I I

Select On or Off. Change the password. Select a channel number that you wish to block. Blocks movies according to the movie ratings limits specified. Prevents children from watching certain children's TV programs, according to the ratings limit set. Based on the ratings, blocks certain TV programs that you and your family do not want to view. Selecting canadian english language rating system. Selecting canadian french language rating system. This function may become available in the future and will be available only for digital channel signal. Enables you to select a source to block from the external source devices you have hooked up.

For Canada TV Rating-General
Lock System Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block : Off
TV Rating-English TV Rating-French Downloadable Rating Input Block
MFL34797033-en-simple 1/20/04 12:34 AM Page 26

TROUBLESHOOTING

The operation does not work normally.
The remote control doesnt work
Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. I Ensure that the batteries are installed with correct polarity (+ to +, - to -). I Ensure that the correct remote operating mode is set: TV, VCR etc. I Install new batteries. Is the sleep timer set? Check the power control settings. Power interrupted. I No broadcast on station tuned with Auto off activated.
Power is suddenly turned off
The video function does not work. Check whether the product is turned on. Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet? I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in.

No picture &No sound

Picture appears slowly after switching on
This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes.
No or poor color or poor picture
Adjust Color in menu option. Keep a sufficient distance between the product and the VCR. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly? I Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station. I Check for sources of possible interference.
Lines or streaks in pictures
Check antenna (Change the direction of the antenna).
MFL34797033-en-simple 1/20/04 12:34 AM Page 27
The audio function does not work. Press the VOL or VOLUME button. I Sound muted? Press MUTE button. I Try another channel. The problem may be with the broadcast. I Are the audio cables installed properly?
Picture OK & No sound

No output from one of the speakers Unusual sound from inside the product
Adjust Balance in menu option. A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of range
Adjust resolution, horizontal frequency, or vertical frequency. Check the input source.
Vertical bar or stripe on background & Horizontal Noise & Incorrect position Screen color is unstable or single color
Work the Auto configure or adjust clock, phase, or H/V position. (Option)
Check the signal cable. Reinstall the PC video card.
MFL34797033-en-simple 1/20/04 12:34 AM Page 28

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges.
MFL34797033-en-simple 1/20/04 12:34 AM Page 29

PRODUCT SPECIFICATIONS

MODELS Including stand Dimensions (Width x Height x Depth) Excluding stand 42PC5D (42PC5D-UL) 42PC5DC (42PC5DC-UL) 41.3 x 30.2 x 12.2 inches 1048.0 x 766.0 x 310.0 mm 41.3 x 28.1 x 3.3 inches 1048.0 x 713.0 x 83.5 mm 61.7 pounds / 28.0 kg 54.2 pounds / 24.6 kg 50PC5D (50PC5D-UL) 50PC5DC (50PC5DC-UL) 48.9 x 34.9 x 14.6 inches 1242.0 x 887 x 370.0 mm.6 48.9 x 32.6 x 3.5 inches 1242.0 x 827 x 88.0 mm.2 86.6 pounds / 39.3 kg 76.3 pounds / 34.6 kg

Weight

including stand excluding stand
Power requirement Television System Program Coverage External Antenna Impedance Operating Temperature Operating Humidity Environment condition Storage Temperature Storage Humidity
AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-ohm 32 ~ 104F (0 ~ 40C) Less than 80% -4 ~ 140F (-20 ~ 60C) Less than 85%
MODELS Including stand Dimensions (Width x Height x Depth) Excluding stand
32LC7D (32LC7D-UK) 32LC7DC (32LC7DC-UK) 32LG10 (32LC7D-UK)

37LC7D (37LC7D-UK)

42LC7D (42LC7D-UK) 40.7 x 29.5 x 1 inches 1.033.4 x 750.0 x 287 mm.6 40.7 x 27.0x 3.5 inches 1 033.4 x 686.8 x 88.5 mm
31.8 x 23.9x 9.8 inches 36.5 x 27 x 1 inches.3 1.0 806.6 x 606.5 x 249.0mm 927 x 692.8 x 280.5 mm.0 31.8 x 21.7 x 3.1 inches 36.5 x24.8 x 3.5 inches 806.6 x 552.3 x 79.0 mm 927 x 630.0 x 88.0 mm.0 30.2 pounds / 13.7 kg 24.7 pounds / 1 kg 1.2
44.1 pounds / 20.0 kg 54.9 pounds / 24.9 kg 35.3 pounds / 16.0 kg 45.0 pounds / 20.4 kg
The specifications shown above may be changed without prior notice for quality improvement.
MFL34797033-en-simple 1/20/04 12:34 AM Page 30
OPEN SOURCE SOFTWARE NOTICE
The following GPL executables and LGPL/MPL libraries used in this product are subject to the GPL/LGPL/MPL License Agreements: GPL EXECUTABLES: I Linux kernel 2.6.12 I busybox LGPL LIBRARIES: I uclibc MPL LIBRARIES: I Nanox
LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: Opensource@lge.com This offer is valid for a period of three(3) years from the date of the distribution of this product by LG Electronics. You can obtain a copy of the GPL, LGPL and MPL licenses on the CD-ROM provided with this product.
This software is based in part on the work of the Independent JPEG Group. This software includes the Zlib compression library, developed by Jean-loup Gailly and Mark Adler. Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler