SOUND & LANGUAGE CONTROL
Auto Volume Leveler (EZ SoundRite). 54 Preset Sound Setting (EZ Sound). 55 Sound Setting Adjustment - User Mode. 56 Balance Adjustment. 57 TV Speakers On/Off Setup. 58 Stereo/SAP Broadcasts Setup. 59 Audio Language. 60 On-Screen Menus Language Selection. 61 Caption/Text. 62 - Analog Broadcasting System Captions. 62 - Digital Broadcasting System Captions. 63 Caption Options. 64

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup. 21 DVD Setup. 24 VCR Setup. 26 Other A/V Source Setup. 28 Digital Audio Output. 28 PC Setup. 29

TIME SETTING

Clock Setting. 65 - Auto Clock Setup. 65 - Manual Clock Setup. 66 Auto On/Off Timer Setting. 67 Auto Shut-off Setting. 68 Sleep Timer Setting. 69
WATCHING TV / CHANNEL CONTROL
Remote Control Functions. 32 Turning On TV. 34 Channel Selection. 34 Volume Adjustment. 34 On-Screen Menus Selection. 35 Channel Setup. 36 - Auto Scan (EZ Scan). 36 - Add / Delete Channel (Manual Scan). 37 - Channel Editing. 38 DTV Signal Strength. 39 Channel Label. 40

SCREEN ADJUSTMENT

Auto Configure (RGB(PC) Mode only). 70 Manual Configure. 71 Selecting XGA Mode. 72 Initializing (Reset to Original Factory Settings). 73
PARENTAL CONTROL / RATINGS
Set Password & Lock System.74 - Setting up Your Password. 74 - Set Password. 75 - Lock System. 75 Channel Blocking. 76 External Input Blocking. 76 Movie & TV Rating. 77 - Movie Rating (MPAA).77 - Downloadable Rating. 77 - TV Rating Children & General. 78 - TV Rating English & French. 79

PICTURE CONTROL

Watching DW (Double Window). 41 Picture Size (Aspect Ratio) Control. 43 Preset Picture Settings - EZ Picture - Preset. 45 - Color Tone - Preset. 46 Manual Picture Adjustment - EZ Picture - User Mode. 47 - Color Tone - User Mode. 48 XD - Picture Improvement Technology. 49 Advanced - Cinema Mode. 50 Advanced - Black (Darkness) Level. 51

APPENDIX

Troubleshooting. 80 Maintenance. 82 Product Specifications. 83 Programming the Remote Control. 84 Set ID. 86 IR Codes. 87

FEATURES OF THIS TV

FOR LCD TV
If the TV feels cold to the touch, there may be a small flicker when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen. On Disposal a. The fluorescent lamp used in this product contains a small amount of mercury. b. Do not dispose of this product with general household waste. c. Disposal of this product must be carried out in accordance to the regulations of your local authority.

PREPARATION

ACCESSORIES
Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product.
PU TV T INP UT PO WE R MO MU LT I TV DE PIP EZ PIP PIC CH PO VC STEZ SOU - PIP W R B ND CH ER RA + PIP TIO SW INPUDV AP T D INF CC O VC

CC XIT ME NU

INP TV INP MU PIP EZ PIC PIP EZ SOU CH LT

UT PO WE

EN RA TE TIO R

MO TV DV D

RE TURN ENTE R ME NU INFO
VC R PIP CH + PIP SW INPU AP T INF O

CH PAG EX

P A G E

CC IT ME NU

LCD TV PLASMA TV

Owner's Manual

FLASHB K

PIP PIP CH -

TIM ER MU TE

RA TIO SA P

EN TER

CH PAG E

FLAS BACK H

1.5V 1.5V

SA P PIP INPU T
http://www.lgusa.com www.lg.ca Copyright 2007 LGE, All Rights Reserved.
Owners Manual, Setup & Operation Guide for Commercial Mode

CD Manual

Remote Control, Batteries

Power Cord

* Slightly wipe stained spot on the exterior only with the polishing cloth for the product exterior if there is stain or fingerprint on surface of the exterior.

BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET and the screw as shown. It will help prevent the power cable from being removed by accident.

PROTECTIVE BRACKET

Install the CABLE HOLDER as shown.

CABLE HOLDER

Install the CABLE MANAGEMENT as shown.

CABLE MANAGEMENT

Do not hold the CABLE MANAGEMENT when moving the product. - If the product is dropped, you may be injured or the product may be damaged.
How to remove the CABLE MANAGEMENT
Hold the CABLE MANAGEMENT with both hands and pull it backward.
To separate the CABLE HOLDER, loosen the bolt installed the set.

BOLT CABLE HOLDER

Here shown may be somewhat different from your TV. 42PG60C, 42PG65C
Hold the CABLE MANAGEMENT with both hands and pull it as shown.
Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
Connect the cables as necessary. To connect an additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Install the CABLE MANAGEMENT CLIP as shown. (Except 42PG60C model) If your TV has CABLE HOLDER, fix it as shown and bundle the cables.

CABLE MANAGEMENT CLIP

How to remove the CABLE MANAGEMENT CLIP

(Except 42PG60C model)

First, press the cable management. Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.

! NOTE

Do not hold the CABLE MANAGEMENT CLIP when moving the TV. - If the TV is dropped, you may be injured or the product may be broken.

STAND INSTALLATION

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section. Secure the power cable with the PROTECTIVE BRACKET/Screw or PLUG IN TYPE HOLDER for power code. It will help prevent the power cable from being removed by accident.

Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

SWIVEL STAND

20 (37LC5DC1, 42LC5DC, 42LC50C,
42PX8DC, 42LB5DC, 42LB50C, 42PG65C models)
90 (32LX5DC/S, 32LX50C/S, 32LC5DC/S,
32LC50C/S, 37LC5DC, 37LC50C, 32/37/42LG5*** models)
The TV can be conveniently swivelled on its stand 20or 90 to the left or right to provide the optimum viewing angle.
ATTACHING THE TV TO A DESK
Here shown may be somewhat different from your TV. The TV must be attached to a desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. 1 * S c r e w s - M 5 x L ( t a b l e d e p t h + 8~m m ) ex) table depth-15mm: Bolts - M5 x 25
32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C
4-Screws (not provided as parts of the product) Desk
4-Screws (not provided as parts of the product)
2-Screws (not provided as parts of the product) Desk

42PG65C

32/37/42LG5*** Stand
1-Screw (provided as parts of the product) Desk

WARNING

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.

VESA WALL MOUNTING

This product accepts a VESA-compliant mounting interface pad. (optional) There 4 threaded holes are available for attaching the bracket. This feature is not available for all models. Product
Model 32LC5DC*, 32LC50C*, 32LX5DC*, 32LX50C*, 32LG5***
VESA (A * B) 200 * * * * * 400

LCD TV

37LG5***, 42LG5*** 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C 42PG60C

PLASMA TV

Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall Mounting Instruction Guide.
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4inches on each side from the wall.
4 inches 4 inches 4 inches 4 inches

Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.)
When connecting with a RCA cable
V Connect the A U D I O/V I D E O jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)

TAL DIO UT CAL)

REMOTE CONTROL OUT R
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.)

SPEAKE OUT 8

Select A V 1 input source with using the I N P U T button on the remote control. If connected to A V I N 2, select A V 2 input source.
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the set.

ANT IN S-VIDEO

Connect the S-VIDEO output of the VCR to the S - V I D E O input on the set. Connect the audio outputs of the VCR to the A U D I O input jacks on the set.

GITAL AUDIO OUT PTICAL)

ENT IN

SPEAK OUT 8

The picture quality is improved: compared to normal composite (RCA cable) input.
Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work.

OTHER A/V SOURCE SETUP

V Connect the A U D I O/V I D E O jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red)

Camcorder

Video Game Set
Select A V 2 input source with using the I N P U T button on the remote control. If connected to A V I N 1 input, select A V 1 input source. Operate the corresponding external equipment.

DIGITAL AUDIO OUTPUT

Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.
i.e) 32/37/42LC5DC*, 32/37/42LC50C*, 42LB5DC, 42LB50C
Send the TVs audio to external audio equipment via the Digital Audio Output (Optical) port.

HDMI/DVI IN

Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu. (G p. 5 8). See the external audio equipment instruction manual for operation.

1(DVI)

RJP NTERFACE
When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p. 5 8)
Do not look into the optical output port. Looking at the laser beam may damage your vision.

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting D-sub 15pin cable
Connect the RGB output of the PC to the R G B I N jack on the set. Connect the PC audio output to the A U D I O I N ( R G B , D V I ) jack on the set.

( ) ( )

SPEAKER OUT 8

AUDIO IN (RGB, DVI)

Turn on the PC and the set. Select R G B - P C input source with using the I N P U T button on the remote control.
Connect the DVI output of the PC to the H D M I / D V I I N 1 ( D V I ) jack on the set. Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the set.

RGB OUTPUT

DIGITA AUDIO OUT (OPTICA VICE ONLY

COMPONENT

Turn on the PC and the set Select H D M I 1 / D V I input source with using the I N P U T button on the remote control.

DVI-PC OUTPUT AUDIO

Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or brightness in PC mode. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the VIDEO menu until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. Avoid keeping a fixed image on the screen for a long period of time. The fixed image may become permanently imprinted on the screen.

Selection ( G or ) leads you to the EZ scan screen.

EZ Scan Manual Scan

Channel Edit

Processing EZ scan.

DTV Signal

Channel Label

Selection ( G or ) leads you to the EZ scan screen. ANALOG

Found Channel(s)

MENU Prev.
Add/Delete Channel (Manual Scan)
A password is required to gain access to Manual Scan menu if the Lock System is turned on.
Press the M E N U button and then use D or E or or button to select the SETUP menu.
Press the G or button and then use D or E or or button to select Manual Scan.
Press the G or button and then use D or E or T or button to select Analog(T V, C A T V), D Digital(D T V, C A D T V).
SETUP VIDEO AUDIO TIME OPTION
G Channel Type ANALOG Number 2
Press the G or button and then use D or E or or button to select channel you want to add or delete.

SCREEN LOCK

Press the ENTER button to add or delete the channel.

Channel Type

Number 2
Press the E X I T or RETURN button to return to TV viewing or press M E N U button to return to the previous menu.

ANALOG G

ANALOG 2
Press to delete the channel.

Channel Editing

A Custom List can be created by toggling each channel on or off with ENTER button. The channels in the Custom List are displayed in black, and the channels deleted from the Custom List are displayed in gray. Once a channel is highlighted you can add or delete the channel by referring to the small window at the top-left corner of the screen. A password is required to gain access to Manual Scan menu if the Lock System is turned on.
ANALOG 2-0 4-0 6-0 9-0 11-0 13-0 14-0
Press the G or button and then use D or E or or button to select C h a n n e l E d i t.
VIDEO AUDIO TIME OPTION SCREEN
Press the G or button and then use D or E or or button to select A N A L O G or D I G I T A L.
Press the G or button and then use D or E or or button to select channel and then use the ENTER button to add or delete it.
Press E X I T or RETURN button to return to TV viewing or press M E N U button to return to the previous menu.

DTV SIGNAL STRENGTH

This feature displays the DTV signal levels being received and indicates whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradation. DTV Signal: This function is only available when the input signal is DTV or CADTV.
VIDEO AUDIO TIME OPTION SCREEN LOCK
Press the G or button and then use D or E or or button to select D T V S i g n a l.
View the on-screen signal strength monitor to see the quality of the signal being received.

Contrast

AUDIO TIME OPTION SCREEN LOCK E

Color Tone - User Mode

You can also adjust the detailed settings (Red, Green, Blue) by selecting the C o l o r T e m p e r a t u r e - U s e r menu.
Press the G or button and then use D or E or or button to select U s e r.
EZ Picture Color Temperature XD Advanced Reset Cool Normal Warm User
Press the G or button and then use D or E or or button to select R e d, G r e e n, or B l u e.

SETUP VIDEO AUDIO

User Red Green Blue 0
The adjustment range of R e d, G r e e n , or B l u e is -40 ~ +40.

TIME OPTION SCREEN LOCK

XD - PICTURE IMPROVEMENT TECHNOLOGY
XD is LG Electronics unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically changed to Auto. When selecting EZ Picture options (User 1 and User 2), you can choose the Auto / Manual. When selecting the Manual, you can adjust the XD Contrast, XD color and XD Noise.
Press the G or button and then use or button to select X D.
Press the G or button and then use D or or button to select A u t o or M a n u a l.
Selecting the Manual Mode button and then use D or E 1. Press the G or or or button to select X D C o n t r a s t, X D C o l o r or X D N R ( N o i s e ), M P E G N R. X D C o n t r a s t : Optimizing the contrast automatically according to the brightness of the reflection. X D C o l o r : Adjusting the colors of the reflection automatically to reproduce as closely as possible to the natural colors. X D N R ( N o i s e ) : Removing the noise up to the point where it does not damage the original picture. M P E G N R : To reduce the picture noise which may appear on the screen during watching the TV. or button to select O n 2. Press the F or G or or O f f.
Auto Manual XD Contrast On XD Color XD NR Off MPEG NR 0 On

ADVANCED - CINEMA MODE

Set up the TV for the best picture appearance for viewing movies. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in Analog, AV1, AV2, and Component 480i mode.

AUDIO TIME OPTION SCREEN

Press the G or button and then use D or E or or button to select A d v a n c e d.
Press the G or button and then use D or E or or button to select C i n e m a.
EZ Picture Color Temperature XD Advanced Reset Black level Low

Cinema Off

Press the G or button and then use D or E or or button to select O n or O f f.
ADVANCED - BLACK (DARKNESS) LEVEL
Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in AV1, AV2, HDMI1/DVI, or HDMI2mode.

Press the G or button and then use D or E or or button to select B l a c k l e v e l.
Press the G or button and then use D or E or or button to select L o w or H i g h. Low The screen gets darker. High The screen gets brighter.

PICTURE RESET

Use to quickly reset all the Video menu options to their original factory preset values.
Press the M E N U button and then use D or or button to select the VIDEO menu.
button and then use D or E or Press the G or or button to select Reset.
Press the G or button to reset the Video menu options to original values.

To set

LOW-POWER PICTURE MODE (Only 42PX8DC model)
Low power reduces the plasma display power consumption.
Press the M E N U button and then use D or E or or button to select the OPTION menu.
Press the G or button and then use D or E or or button to select L o w P o w e r.
Aspect Ratio Caption/Text Caption Options Language ISM Method Low Power Set ID
When you select On, the screen darkens.

Off On

IMAGE STICKING MINIMIZATION(ISM) METHOD
A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image. Use our unique method to minimize any fixed image on the screen.
button and then use D or E or Press the G or or button to select ISM Method.
Aspect Ratio Caption/Text
Press the G or button and then use D or E or or button to select either Normal, White Wash, Orbiter or Inversion.
Caption Options Language ISM Method Low Power Set ID
Normal If image sticking is never a problem, ISM is not necessary set to Normal. White wash White Wash removes permanent images from the screen.
An excessive permanent image may be impossible to clear entirely with White Wash. To return to normal viewing, press any button.
Normal White Wash Orbiter Inversion
Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the image will move once per 2 minutes : Left Right Upside Downside Right Left Downside Upside. Inversion Inversion will automatically invert the plasma display panel color every 30 minutes.

Press the M E N U button and then use the D or E or or button to select the L O C K menu. Then, press the G or button. Enter the password as requested. The TV is set up with the initial password 0-0-0-0.
Enter Password Enter Password

Set Password

Change the password by inputting a new password twice.

For USA

VIDEO AUDIO TIME OPTION

For Canada

After inputting the password, use the D or E or or button to choose S e t p a s s w o r d. Press the G or button and then choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the C o n f i r m. Then your changed password has been memorized. Press E X I T or R E T U R N to return to TV viewing or press M E N U to return to the previous menu.

New Confirm

* * * * * * * *
If you ever forget your password, key in 7, 7, 7, 7 on the remote control.

Lock System

Enables or disables the blocking scheme you set up previously.

Lock System Set Password

AUDIO SETUP VIDEO

Block Channel

Movie Rating TV Rating-Children TV Rating-General Aux. Block Downloadable Rating
After inputting the password, use the D or E or or button to choose L o c k S y s t e m. Press the G or button and then use the D or E or or button to select O n or O f f.
When you select O n, the Lock System is enable.
Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Aux. Block

Downloadable Rating

PARENTAL CONTROL /RATINGS

CHANNEL BLOCKING

Blocks any channels that you do not want to watch or that you do not want your children to watch. For USA
After inputting the password, use the D or E or or button to choose B l o c k C h a n n e l. Press the G or button. You will now see a screen filled with channel numbers and a preview picture. Use D E F G or button to select a channel and then use the E N T E R button to block or unblock it. Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous menu.

EXTERNAL INPUT BLOCKING

For USA Enables you to select a source to block from the external source devices you have hooked up.

TV Rating Children -for USA only
Prevents children from watching certain children's TV programs, according to the ratings limit set. The children rating does not apply to other TV programs. Unless you block certain TV programs intended for mature audiences in the TV Rating - sub menu, your children can view those programs.
After inputting the password, use the D or E or button to choose T V R a t i n g - C h i l d r e n.
button and then use the D or E or Press the G or or button to select A g e, or F a n t a s y V i o l e n c e. button and then use the D or E or Press the G or or button to select block options.
Age (applies to TV-Y, TV-Y7) Fantasy Violence (applies to TV-Y7)

Age Fantasy Violence

TV Rating General -for USA only
Based on the ratings, blocks certain TV programs that you and your family do not want to view.
After inputting the password, use the D or E or button to choose T V R a t i n g - G e n e r a l.
button and then use the D or E or Press the G or or button to select A g e, D i a l o g u e, L a n g u a g e, S e x or V i o l e n c e. button and then use the D or E or Press the G or or button to select block options. Age (applies to TV-G,TV-PG,TV-14,TV-MA) Dialogue-sexual dialogue (applies to TV-PG,TV-14) Language-adult language (applies to TV-PG,TV-1 4,TV-MA) Sex-sexual situations (applies to TV-PG,TV-14,TV-MA) Violence (applies to TV-PG,TV-14,TV-MA)
Age Dialogue Language Sex Violence
TV Rating English - for CANADA only
After inputting the password, use the D or E or button to choose T V R a t i n g - E n g l i s h.
Press the G or button and then use the D or E or or button to select E, C, C 8 +, G, P G, +, +, or Blocking Off. E(Exempt) C(Children) C8+(Children eight years and older) G(General programming, suitable for all audiences) PG(Parental Guidance ) 14+(Viewers 14 years and older) 18+(Adult programming) Blocking Off(Permits all programs)
E C C8+ G PG 14+ 18+ Blocking Off
TV Rating French - for CANADA only
After inputting the password, use the D or E or button to choose T V R a t i n g - F r e n c h.
button and then use the D or E or Press the G or or button to select E, G, 8 ans+, 13 ans+, 16 ans+, 18 ans+, or Blocking Off. E(Exempt) G(General) 8 ans+(General-Not convenient for little children) 1 ans+(Not convenient for children of 1 years and younger) 16 ans+(Not convenient for children of 1 years and 6 younger) 18 ans+(This programs is only for adults) Blocking Off(Permits all programs) Press E X I T or R E T U R N button to return to TV viewing or press M E N U button to return to the previous menu.

Check the signal cable. Reinstall the PC video card.

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. I Please be sure not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

PRODUCT SPECIFICATIONS

MODELS Dimensions (Width x Height x Depth) With stand

(Only 42PG65C)

42PG60C (42PG60C-UA)

42PG65C (42PG65C-UA)

41.1 x 28.9 x12.1 inches 1044.4 x 735.4 x 308.0 mm

Without stand

41.1 x 26.7x 3.1 inches 1044.4 x680.5x 79.6mm
41.1 x 26.7x 4.2 inches 1044.4 x680.5x 107.6mm 61.2 pounds / 27.8 kg 55.1 pounds / 25.0 kg

Weight

With stand (Only 42PG65C) Without stand MODELS

55.1 pounds / 25.0 kg

32LG500H (32LG500H-UA/UB),37LG500H (37LG500H-UA/UB), 42LG500H 32LG505H (32LG505H-UA/UB), 37LG505H (37LG505H-UA/UB), (42LG500H-UA, 42LG500H-UB) 32LG515H (32LG515H-UA/UB) 37LG515H (37LG515H-UA/UB) 32.0 x 23.5 x 8.9 inches 813.8 x 598.8 x 227.3 mm 32.0 x 21.2 x 4.3 inches 813.8 x 540.4 x 1 1.5 mm 1 29.9 pounds / 13.6 kg 26.6 pounds / 12.1 kg 36.8 x 26.9 x 1 inches 40.7 x 28.9 x 1 inches 1.5 1.5 936.4 x 685.4 x 293.4 mm 1034.0 x 735.0 x 294.0 mm 36.8 x 24.1 x 4.4 inches 40.7 x 26.1 x 4.5 inches 936.4 x 612.8 x 1 12.1 mm 1034.0 x 663.0 x 1 15.8 mm 40.3 pounds / 18.3 kg 34.3 pounds / 15.6 kg 48.5 pounds / 22.0 kg 42.9 pounds / 19.5 kg
Dimensions (Width x Height x Depth)
With stand Without stand With stand Without stand
32LC5DC/S/B (32LC5DC/S/B-UA) 32LC50C/S/B (32LC50C/S/B-UA)
Width x Height x Depth (inches/mm) With Stand Without Stand Weight (pounds / kg) With Stand Without Stand With Stand Without Stand Weight (pounds / kg) With Stand Without Stand With Stand Without Stand Weight (pounds / kg) Width x Height x Depth (inches/mm) With Stand Without Stand With Stand Without Stand Weight (pounds / kg) Width x Height x Depth (inches/mm) With Stand Without Stand With Stand Without Stand Weight (pounds / kg) Width x Height x Depth (inches/mm) With Stand Without Stand With Stand Without Stand Weight (pounds / kg) With Stand Without Stand Power requirement Television System Program Coverage External Antenna Impedance Operating Temperature Range Operating Humidity Range Storage Temperature Range Storage Humidity Range

31.8 x 23.9 x 9.8 inches 806.6 x 607 x 249.0 mm.5 31.8 x 21.7 x 3.8 inches 806.6 x 552.3 x 97 mm.2 33.7 pounds / 15.3kg 27 pounds / 12.5 kg.6 36.5 x 27 x 10.4 inches.4 926.8 x 695.8 x 264.6 mm 36.5 x24.8 x 4.2 inches 926.8 x 629.8 x 107 mm.pounds / 21.4 kg.2 36.8 pounds / 16.7 kg 40.7 x 29.6 x 1 inches 1.6 1033.1 x 750.7 x 294.2 mm 40.7 x 27 4.3 inches.0x 1033.1 x 686.5 x 1 10.2 mm 61.3 pounds / 27 kg.pounds / 21.4 kg.2 36.3 x 24.2 x 1 inches 1.3 922.0 x 615.0x 288.0 mm 36.3 x 21.5 x 3.9 inches 922.0 x 546.0 x 98.0 mm 39.0 pounds / 17 kg.7 30.4 pounds / 13.8 kg 46.7 x 28.1 x 10.6 inches 1 186.0 x 714.0 x 270.0 mm 46.7 x 25.7 x 3.9 inches 1 186.0 x 654.0 x 99.0 mm 72.5 pounds / 32.9 kg 55.6 pounds / 25.2 kg 40.7 x 29.6 x 1 inches 1.6 1033.1 x 750.7 x 294.2 mm 40.7 x 27 4.3 inches.0x 1033.1 x 686.5 x 1 10.2 mm 61.3 pounds / 27 kg.pounds / 21.4 kg.2 AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM
37LC5DC/1/B (37LC5DC/1/B-UA) 37LC50C/B (37LC50C/B-UA)
Width x Height x Depth (inches/mm)
42LC5DC (42LC5DC-UA) 42LC50C (42LC50C-UA)
32LX5DC/S (32LX5DC/S-UA) 32LX50C/S (32LX50C/S-UA)

42PX8DC (42PX8DC-UA)

42LB5DC (42LB5DC-UA) 42LB50C (42LB50C-UA)
VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-ohm 32 ~ 104F (0 ~ 40C) Less than 80% -4 ~ 140F (-20 ~ 60C) Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
PROGRAMMING THE REMOTE CONTROL
The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands.
Programming a code into a remote mode
To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button. If the device is turned off and it responds properly the remote control need not be programmed. If not, the remote should be programmed to operate the device. The programming procedures are explained below. Press the M E N U and M U T E button continuously at the same time for two seconds; the currently selected device button is illuminated. If you don't press any button for 20 seconds, the light on the mode button will be turned off. In that case, you have to repeat from step 2. Enter the appropriate code from the code table on the following pages. When pressing the button, the light blinks at a time. If the device turned off, the programming is successful. Press the M E N U button to store the code. After blinking twice, this code is stored. Test the remote control functions to see if the device responds properly. If not, steps 2-5.

Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
Never touch this apparatus or antenna during a thunder or lighting storm. Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
Outdoor use marking : WARNING - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus.
CAUTION concerning the Power Cord : Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use
GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Power Supply Short-circuit Breaker
DISCONNECTING DEVICE FROM MAINS Mains plug is the disconnecting device. The plug must remain readily operable.

CONTENTS

WARNING / CAUTION. 1 SAFETY INSTRUCTIONS. 2 FEATURE OF THIS TV. 6 PREPARATION

Accessories. 7 Front Panel Information. 8 Back Panel Information. 10 Stand Installation. 14 Cable Management. Desktop Pedestal Installation. Swivel Stand. Attaching the TV to a Desk. 1 VESA Wall Mounting. 19 Protection Cover. 20 Securing the TV to the wall to prevent falling. 21 Antenna or Cable Connection. 22 Channel Setup - Auto Scan (Auto Tuning). 56 - Add / Delete Channel (Manual Tuning). 57 - Channel Editing. 58 Input List. 59 Input Label. 60 AV Mode. 61 SIMPLINK. 62
Entry Modes. 64 Photo List. 65 Music List. 69

PICTURE CONTROL

Picture Size (Aspect Ratio) Control. 72 Preset Picture Settings - Picture Mode - Preset. 74 - Color Tone - Preset. 75 Manual Picture Adjustment - Picture Mode - User Mode. 76 - Picture Mode - Expert Control. 77 Picture Improvement Technology. 78 Advanced Control - Black (Darkness) Level. 79 Advanced Control - Eye Care. 80 Advanced - Real Cinema/Film Mode. 81 Advanced - TruMotion. 82 TruMotion Demo. 83 Picture Reset. 84 Power Indicator. 85 Image Sticking Minimization (ISM) Method. 86 Power Saving Picture Mode. 87

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup. 23 DVD Setup. 29 VCR Setup. 33 Other A/V Source Setup. 36 PC Setup. 37 USB Connection. 46 Audio Out Connection. 47
WATCHING TV / CHANNEL CONTROL
Remote Control Functions. 48 Turning On the TV. 50 Channel Selection. 50 Volume Adjustment. 50 Quick Menu. 51 Initial Setting. 52 On-Screen Menus Selection. 54
SOUND & LANGUAGE CONTROL
Auto Volume Leveler (Auto Volume). 88 Preset Sound Settings (Sound Mode). 89 Sound Setting Adjustment - User Mode. 90 Clear Voice. 91 Balance. 92 TV Speakers On/Off Setup. 93 Audio Reset. 94 Stereo/SAP Broadcasts Setup. 95 Audio Language. 96 On-Screen Menus Language Selection. 97 Caption Mode - Analog Broadcasting System Captions. 98 - Digital Broadcasting System Captions. 99 - Caption Option. 100

APPENDIX

Troubleshooting. 1 Maintenance. 120 Product Specifications. 121 Programming the Remote Control. 124 IR Codes.127 External Control Through RS-232C.129 Open Source License.136

TIME SETTING

Clock Setting - Auto Clock Setup. 101 - Manual Clock Setup. 102 Auto On/Off Time Setting. 103 Sleep Timer Setting. 104 Auto Shut-off Setting. 105
PARENTAL CONTROL / RATINGS
Set Password & Lock System. 106 Channel Blocking. Movie & TV Rating. 1 Downloadable Rating. 16 External Input Blocking. 1 Key lock. 1 17

Copper Wire Be careful not to bend the copper wire when connecting the antenna.

2. Cable

Cable TV Wall Jack

RF Coaxial Wire (75 ohm)

( ) To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. I If the antenna is not installed properly, contact your dealer for assistance.
ANTENNA/ CABLE IN ANTENNA/ CABLE IN

Wall Antenna Socket

Multi-family Dwellings/Apartments (Connect to wall antenna socket)
Outdoor Antenna (VHF, UHF)

Antenna

Signal Amplifier
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. Image shown may differ from your TV.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection

1. How to connect
Connect the video outputs (Y, PB, PR) of the digital settop box to the C O M P O N E N T I N V I D E O 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O 1 jacks on the TV.

2. How to use

Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box. operation) Select the C o m p o n e n t 1 input source on the TV using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select the C o m p o n e n t 2 input source on the TV.
Supported Resolutions Signal 480i 480p 720p 1080i 1080p Component Yes Yes Yes Yes Yes HDMI No Yes Yes Yes Yes
Y, CB/PB, CR/PR Resolution 720x480i 720x480p 1280x720p 1920x1080i Horizontal Frequency(KHz) 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 Vertical Frequency(Hz) 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00

1920x1080p

Plasma TV, 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70

Digital

Connect one end of the optical or coaxial cable to the TVs O P T I C A L or COAXIAL (Except 32/37/42LG30) port of D I G ITAL AUDIO OUT.
Connect the other end of the optical or coaxial cable to the digital audio input on the audio equipment.
Set the TV Speaker option - Off in the AUDIO menu. (G p.93). See the external audio equipment instruction manual for operation.
RS-232C IN 1 (CONTROL & SERVICE)
When connecting with external audio equipments, such as amplifiers or speakers, you can turn the TV speakers off in the menu. (G p. 9 3)
Do not look into the optical output port. Looking at the laser beam may damage your vision. Block the SPDIF out (optical/coaxial) about the contents with ACP(Audio Copy Protection) function.

REMOTE CONTROL FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.
TV/STB/DVD/VCR Select the remote operating mode: TV, STB, DVD, or VCR. POWER Turns your TV or any other programmed equipment on or off, depending on the mode. Q.MENU Select the desired quick menu source. G p.51 MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu. INPUT External input modes rotate in regular sequence. VOLUME UP Increase/decrease the sound level. /DOWN FAV Scroll through the programmed Favorite channels. G p.51

TV STB

DVD VCR INPUT

Q. MENU MENU

RETURN

AV MODE

MUTE Switch the sound on or off. G p.50 CHANNEL Select available channels. UP/DOWN PAGE Move from one full set of screen information to the next one. UP/DOWN NUMBER button (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tune to the last channel viewed.

P A G E

FLASHBK
VCR/DVD, USB, SIMPLINK Control buttons
Control video cassette recorders or DVD players. Control USB menu (PHOTO LIST and MUSIC LIST.) Control the SIMPLINK compatible devices.

THUMBSTICK Navigate the on-screen menus and adjust the system settings to your preference.
(Up/Down/Left Right/ENTER)
RETURN Allows the user to move return one step in an interactive application or other user interaction function.
SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears at the screen. G p.62-63 AV MODE It helps you select and set images and sounds. G p.61

Installing Batteries

Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AAA batteries. Dont mix old or used batteries with new ones. Close cover.

TURNING ON THE TV

First, connect power cord correctly. At this moment, the TV switches to standby mode. I In standby mode to turn TV on, press the ) , INPUT, CH (DE or ), Number button on the TV or press the POWER, INPUT, CH( or ( 0~9 ) button on the remote control. 9 Select the viewing source by using the INPUT button on the remote control. I This TV is programmed to remember which power state it was last set to, even if the power cord is out. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

CHANNEL SELECTION

Press the C H ( or ) or NUMBER buttons to select a channel number.

VOLUME ADJUSTMENT

Adjust the volume to suit your personal preference.
Press the V O L ( + or - ) button to adjust the volume. If you want to switch the sound off, press the M U T E button. You can cancel the Mute function by pressing the MUTE or V O L ( + or - ) button.

QUICK MENU

Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. Q.Menu (Quick Menu) is a menu of features which users might use frequently.
A s p e c t R a t i o: Selects your desired picture format. P o w e r S a v i n g (Plasma TV Only): Adjusts screen brightness to reduce the power consumption of the TV. B a c k l i g h t (LCD TV Only): Adjust the brightness of LCD panel to control the brightness of the screen. C l e a r V o i c e: By differentiating the human sound range from others, it helps make human voices sound better. P i c t u r e M o d e: Selects the factory preset picture depend on the viewing environment.

Show the Popup menu. Select V i e w.
The selected photo is displayed in full size.

Use the C H photo page.

button to navigation in the
Select the Sideshow, B G M, D e l e t e, Option, or Hide.

(Rotate),

1/17 Sideshow BGM Delete Option Hide
Use button to select the previous or next photo. I Use button to select and control the menu on the full-sized screen.
S i d e s h o w: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show. I Set the time interval of the slide show in O p t i o n. I A slide show continues for a maximum of 4 hours. After 4 hours, the slide show will end and go to TV mode or external input mode. G B G M: Listen to music while viewing photos in full size. I Set the BGM device and album in O p t i o n. ( R o t a t e ): Rotate photos. G I Rotates the photo 90, 180, 270, 360 clockwise. G D e l e t e: Delete photos. G O p t i o n: Set values for S l i d e S p e e d and M u s i c F o l d e r. I Use button and E N T E R button to set values. Then go to and press E N T E R to save the settings. I You cannot change M u s i c F o l d e r while BGM is playing. G H i d e : Hide the menu on the full-sized screen. I To see the menu again on the full-sized screen, press E N T E R button to display.
Press F G to set the time interval between slides. Slide Speed Music Folder ENTER Fast. Cancel
This TV will not be able to decode most JPEG images saved using the Progressive option.
You can use the Music List menu to play MP3 files form a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different.
Supported music file: *.MP3 Bit rate range 40Kbps ~ 320Kbps Sampling rate (Sampling Frequency) MPEG1 : 32000, 44100, 48000Hz MPEG2 : 16000, 24000, 22050Hz MPEG2.5 : 16 ~ 48KHz
Select M U S I C L I S T.
Moves to upper level file Preview: If any album jacket for the file exists, this jacket is displayed. Current page/Total pages Total number of marked musics Usable USB memory Corresponding buttons on the remote control
Page 1/1 Drive1 Arirang Upper Arirang Good Bye 04:12 05:30 No Marked Title
Free Space 150MB Play Time

3945 KB, 128 Kbps

Music Selection and Popup Menu
Up to 6 music titles are listed per page.
USB Device Page 1/1 No Marked
Title Upper Arirang Good Bye 04:12 05:30

Arirang

Play Time

3945 KB, 128 Kbps Upper

Title Upper Arirang Good Bye

3945 KB 128 Kbps

Play Play with Photo Mark All Delete Cancel
P l a y (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the E N T E R button, the current music in playback will stop. G P l a y M a r k e d: Play the selected musics. Once a music finishes playing, the next selected one will be played automatically. G S t o p P l a y (During playback): Stop the playing musics. G P l a y w i t h P h o t o: Start playing the selected musics and then move to the Photo List. G M a r k A l l: Mark all musics in the folder. G U n m a r k A l l: Deselect all marked music. G D e l e t e: Delete the selected music. G C a n c e l: Close the pop-up menu.

Medium Off Off Off Medium Low Off
Noise Reduction Gamma Black Level Film Mode

Eye Care Real Cinema

Off High

For Plasma TV

For LCD TV
Select R e a l C i n e m a or F i l m M o d e.
ADVANCED CONTROL - TRUMOTION
- Only 32/37/42/47/52LG60, 32/42/47/52LG70
TruMotion provides even better quality for movies than 3:2 Pull-Down conversions. TruMotion means the panel supports faster frame rates that normal panels which makes for smoother motion in video. TruMotion LCD models support 120Hz instead of 60Hz. This means twice the information on the screen in the same amount of time and easier film conversions (120 is equally divisible by 24, so no interpretations or double frames are needed). TruMotion works with all inputs except PC mode.

50 Color Temperature

Medium Off Off Off Medium Low Off Off
60 Fresh Contrast Color 60 Fresh Color G Tint 0 R Noise Reduction Advanced Control Gamma Reset Black Level Screen (RGB-PC) TruMotion Demo Eye Care Real Cinema TruMotion
Select T r u M o t i o n.
Select O f f, L o w, or H i g h.
H i g h: Provides smoother picture movement. L o w: Provides smooth picture movement. Use this setting for standard use. O f f: Use this setting when Highand Low setting result in noise. If you enable "TruMotion", noise may appear on the screen. If this occurs, set "TruMotion" to "Off".
TRUMOTION DEMO - Only 32/37/42/47/52LG60, 32/42/47/52LG70
Use this feature to see the difference TruMotion makes. TruMotion works with all inputs except PC mode.
Advanced Control TruMotion On TruMotion Off
Select T r u M o t i o n D e m o.
Begin T r u M o t i o n D e m o.
Stop T r u M o t i o n D e m o.

PICTURE RESET

Settings of the selected picture modes return to the default factory settings.
Brightness Sharpness Color Tint
G 0 R Resetting video configuration. Advanced Control
Reset Screen (RGB-PC) TruMotion Demo Screen (RGB-PC)

Reset TruMotion Demo

Initialize the adjusted value.
POWER INDICATOR - LCD TV Only
: English : On : Off : Off Srartup Sound :1 Standby Light Power Light : Home Demo Mode Close

Auto Volume Clear Voice Balance Sound Mode : Standard : Off : On
Auto Volume Clear Voice : On : On

Off On 0

Select A U D I O.
Select A u t o V o l u m e.
PRESET SOUND SETTINGS (SOUND MODE)
Sound Mode lets you enjoy the best sound without any special adjustment as the TV sets the appropriate sound options based on the program content. S t a n d a r d, M u s i c, C i n e m a, S p o r t, and G a m e are preset for optimum sound quality at the factory and are not adjustable.
Balance Sound Mode : Standard
Standard SRS TruSurround XT: Off Music Treble 50 Cinema Bass 50 Sport Reset Game
Select S o u n d M o d e.
You can also adjust S o u n d M o d e in the Q. M e n u.
Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e. Return to the previous menu. Return to TV viewing.
SOUND SETTING ADJUSTMENT - USER MODE
Adjust the sound to suit your taste and room situations.
Auto Volume Clear Voice Balance Sound Mode : Standard SRS TruSurround XT: Off Treble Bass Reset
Auto Volume Clear Voice : Off : On 0 : Standard

: Off : On 0

Balance Sound Mode
SRS TruSurround XT Treble Bass Close

1 MENU 2

Select S t a n d a r d, M u s i c, C i n e m a, S p o r t, or G a m e.
Select T r e b l e or B a s s.

SRS TRUSURROUND XT

Select S R S T r u S u r r o u n d X T
S R S T r u S u r r o u n d X T: Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard stereo material.

CLEAR VOICE

By differentiating the human sound range from others, it improves the sound quality of voices.
Select C l e a r V o i c e.
C If you select C l e a r V o i c e - O n, S R S T r u S u r r o u n d X T feature will not work. You can also adjust C l e a r V o i c e in the Q - M e n u.

BALANCE

Adjust the left/right sound of speaker to suit your taste and room situations.
Auto Volume Clear Voice Balance Sound Mode : Standard : Off : On 0

Sound Mode 50 50

Select B a l a n c e.

Balance

L Balance

TV SPEAKERS ON/OFF SETUP

Turn the TV speakers off if using external audio equipment.

: Feb/21/2008 2:10 AM F Year Month Date Hour Minute Time Zone
Manual AM 10 Eastern Auto Close

Select M a n u a l.

Select the Year, Month, Date, Hour, or Minutes option. Set the Year, Month, Date, Hour, or Minutes option.

AUTO ON/OFF TIME SETTING

This function operates only if the current time has been set. The O f f T i m e function overrides the O n T i m e function if they are both set to the same time. The TV must be in standby mode for the O n T i m e to work. If you do not press any button within 2 hours after the TV turns on with the O n T i m e function, the TV will automatically revert to standby mode.
Clock Off Time On Time : Off
Repeat : 6:30 AM (Once) Sleep Timer : Off Hour Auto Sleep : Off Minute Input Channel Volume
Once 6 AM 30 TV TV 2-0 30
To cancel O n / O f f T i m e function, select O f f. Only for On Time function
Select O f f t i m e or O n t i m e.

Select I n p u t.

Select R e p e a t.
Select T V, AV/AV1-2, Component1-2, R G B - P C, or H D M I 1 - 4. When Selecting T V: set the channel at turn-on. Adjust to sound level at turn-on.
F Select O f f, O n c e, E v e r y d a y, M o n~F r i, M o n~S a t, W e e k e n d, or S u n d a y. S
Select and set H o u r or M i n u t e.

SLEEP TIMER SETTING

The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off.

Off Close

Select S l e e p T i m e r.
Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 0, 0, or 0 minutes.
You can also adjust S l e e p T i m e r in the Q - M e n u.

AUTO SHUT-OFF SETTING

TV will be automatically turned off, in case of no signal for 10 minutes.
Sleep Timer : Off Auto Sleep : On Off On
TV will be automatically turned off, in case of No Signal for 10 minutes.
Select A u t o S l e e p.
Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by choosing the type of the program and the categories. It is also possible to block all program viewing for a time period. To use this function, the following must be done : 1. Set ratings and categories to be blocked. 2. Specify a password 3. Enable the lock

V-Chip rating and categories
Rating guidelines are provided by broadcasting stations. Most television programs and television movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown at the theaters or direct-tovideo movies use the Movie Rating System (MPAA) only.
Ratings for Television programs including made-for-TV movies :

TV-G I TV-PG I TV-14

(General audience) (Parental guidance suggested) (Parents strongly cautioned)
TV-MA (Mature audience only) (All children) I TV-Y I TV-Y7 (Children 7 years older)
SET PASSWORD & LOCK SYSTEM
PARENTAL CONTROL / RATING

Setting up Your Password

Set up blocking schemes to block specific channels, ratings, and external viewing sources. A password is required to gain access to this menu. For USA
Lock System Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block

Enter Password

Select L O C K.
Enter the password as requested. The TV is set up with the initial password 0-0-0-0.

Input the password.

Lock System
Enables or disables the blocking scheme you set up previously.

Off On

Select L o c k S y s t e m.
When you select O n, the Lock System is enable.

Set Password

Change the password by inputting a new password twice.

: Off New Confirm

Select S e t p a s s w o r d. Choose any 4 digits for your new password. As soon as the 4 digits are entered, re-enter the same 4 digits on the C o n f i r m.

CHANNEL BLOCKING

Blocks any channels that you do not want to watch or that you do not want your children to watch.

Block/Unblock

Select B l o c k C h a n n e l.
Select a channel to block or unblock.
Block or unblock a channel.

6 MENU

MOVIE & TV RATING
Movie Rating (MPAA) - For USA only
Blocks movies according to the movie ratings limits specified, so children cannot view certain movies. You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such as soap operas.
Enter Blocking off : Permits all programs
G PG PG-13 R NC-17 X Blocking Off
Select L O C K. G (General audience) I PG (Parental guidance suggested) I PG-13 (Parents strongly cautioned) I R (Restricted) I NC-17 (No one 17 and under admitted) I X (Adult only) I Blocking Off (Permits all programs) G If you set PG-13: G and PG movies will be available, PG-13, R, NC-17 and X will be blocked.

: Off Humor Sport Cruelty Language Sadness Genre Age
Based on rating table, your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual.
Select D o w n l o a d a b l e R a t i n g.
Select desired D o w n l o a d a b l e R a t i n g option. Select desired option and block it.

EXTERNAL INPUT BLOCKING

Enables you to block an input.
AV2 Component1 Component2 RGB-PC HDMI1 HDMI2 HDMI3 Close
Select I n p u t B l o c k.

Select input source.

5 6RETURN

KEY LOCK

The TV can be set up so that it can only be used with the remote control. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the TV off.
: English : On : On : Off : Level 0 :1 Off On

: Normal

Select Key Lock.
O In K e y L o c k O n, if the TV is turned off, press the r / I, INPUT, CH (DE or ) button on the TV or POWER, INPUT, CH or NUMBER buttons on the remote control. With the K e y L o c k O n, the display ! K e y L o c k appears on the screen if any button on the front panel is pressed while viewing the TV.

TROUBLESHOOTING

The operation does not work normally.
The remote control doesnt work
Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. I Ensure that the batteries are installed with correct polarity (+ to +, - to -). I Ensure that the correct remote operating mode is set: TV, VCR etc. I Install new batteries. Is the sleep timer set? I Check the power control settings. Power interrupted.
Power is suddenly turned off
The video function does not work. Check whether the product is turned on. I Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet? I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in.

No picture &No sound

Picture appears slowly after switching on
This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes.
No or poor color or poor picture
Adjust Color in menu option. Keep a sufficient distance between the product and the VCR. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly? I Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station. I Check for sources of possible interference.

No. 9 Pin Name No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection

Communication Parameters

Baud rate : 9600 bps (UART) I Data length : 8 bits I Parity : None I Stop bit : 1 bit I Communication code : ASCII code I Use a crossed (reverse) cable.
This product has command echo back in the RS-232C Command.

RS-232C Configurations

Either cable below can be used. 7-Wire Configuration (Serial female-female NULL modem cable) PC RXD TXD GND DTR DSR RTS CTS 8 D-Sub 9 TV 7 D-Sub 9 TXD RXD GND DSR DTR CTS RTS RXD TXD GND DTR DSR RTS CTS 3-Wire Configurations (Not standard) PC 8 D-Sub 9 TV 8 D-Sub 9 TXD RXD GND DTR DSR RTS CTS

Set ID

Use this function to specify a TV ID number. Refer to Real Data Mapping1. G p.133.
: English : On : Off : Off : Level 0 :1
Select Set ID. Choose the desired TV ID number. The adjustment range of Set ID is 1~99. Return to the previous menu. Return to TV viewing.

Command Reference List

COMMAND1 COMMAND2 DATA (Hexadecimal) COMMAND1 COMMAND2 DATA (Hexadecimal)
01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07 Contrast. 08. Brightness 09. Color 10. Tint 1 Sharpness 1. 12. OSD Select 13. Remote Control Lock Mode

k x k k k k k k k k k k

a b c d e f g h i j k l
00 ~ 01 (G p.132) (G p.132) 00 ~ ~ ~ ~ ~ ~ ~ ~ ~ 01
14. Treble 15. Bass 16. Balance 17 Color Temperature. 18. ISM Method 19. Power Saving 20. Auto Configuration 22. Channel Add/Del 23. Key 24. Backlight

k k k k j j j m m m

r s t u p q u b c g
00 ~ ~ ~ ~ 02 (G p.134) 00 ~ 01 (G p.134) 00 ~ 01 (G p.135) 00 ~ 64
Only LCD TV Model Only Plasma TV Model

00 ~ 01

DATA00 DATA01 DATA02 DATA03 DATA04 DATA05 (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal)

COMMAND1 COMMAND2

21. Channel Tuning
physical major major low program high program low

minor high

minor low

attribute

Transmission / Receiving Protocol
Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired TV ID number in Setup menu. Adjustment range is 1~ 99. When selecting Set ID 0, every connected the TV is controlled. Set ID is indicated as decimal (1~ 99) on menu and as Hexa decimal (0x0~ 0x63) on transmission /receiving protocol. [DATA] : To transmit the command data. Transmit the FF data to read status of command. [Cr] : Carriage Return ASCII code 0x0D [ ] : ASCII code space (0x20) * In this model, TV will not send the status during the standby mode. OK Acknowledgement [Command2][ ][Set ID][ ][OK][Data][x] The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer. * In this model, TV will not send the status during the standby mode. * Data Format [Command 2] : Use as command. [Set ID] : Use the small character, if set ID is 10, it will send the 0, a. [DATA] : Use the small character, if data is 0 x ab, it will send the a, b. [OK] : Use the large character. Error Acknowledgement [Command2][ ][Set ID][ ][NG][Data][x] The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data1: Illegal Code Data2: Not supported function Data3: Wait more time * In this model, TV will not send the status during the standby mode. * Data Format [Command 2] : Use as command. [Set ID] : Use the small character, if set ID is 10, it will send the 0, a. [DATA] : Use the small character, if data is 0 x ab, it will send the a, b. [NG] : Use the large character

any later version published by the Free Software Foundation. If the program does not specify a version number of this license, you may choose any version ever published by the Free Software Foundation. 10.If you wish to incorporate parts of the program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 1 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, 1. THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12.IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS How to apply these terms to your new programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the "copyright" line and a pointer to where the full notice is found. one line to give the program's name and a brief idea of what it does. Copyright (C) <year> <name of author> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the license, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 021 10-1301 USA.