ENGLISH

LCD TV PLASMA TV OWNERS MANUAL
LCD TV MODELS L T 7* L T 7* L T 7* PLASMA TV MODELS P T 8* P T 8*
Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
Trademark of the DVB Digital Video Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 4652: 42PT85 4681: 32LT75 4679: 42LT75 4651: 50PT85 4680: 37LT75

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

Owner's Manual

Owners manual

Owners Manual

IN PU D/A T TV/RA INPU DIO T SIM PLINK TE XT INFO i VC LIV E TV R BR IG HT DV D PO W

Power Cord

Polishing Cloth
Polishing cloth for use on the screen This feature is not available for all models.

M O D TV E

*Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing cloth. Do not use excessive force. This may cause scratching or discolouration.

EX IT TI SH ME IFT

BA CK DV R MEN U

TI SH ME IFT

FA V PR

7 LIST

UPDA TE SUBT ITLE SL EE P HO LD RAT IO I/II RE VE AL INDE X TIM E

9 Q.VIE W 3

Batteries Remote Control

Plasma TV models

2-Wall brackets

2-eye-bolts

This feature is not available This feature is not available for all models. for all models.

LCD TV models

32, 37 only

/ L T 7* o n l y

2- TV Brackets 2- Wall Brackets
This feature is not available for all models.

2-bolts

Twister Holder Arrange the wires with Cable Management the twister holder.
4-bolts for stand assembly Refer to p. 9
1-screw for stand fixing Refer to p. 9

CONTENTS

PREPARATION
Home Menu. 4 Front Panel Controls. 5 Back Panel Information. 7 Stand installation. 9 ATTACHING THE TV TO A DESK (Only 32/37LT7* model).9 Attaching the TV to a wall. 10 Back Cover for Wire Arrangement. Desktop Pedestal Installation. 13 Wall Mount: Horizontal installation. 13 Antenna Connection. 14
CI Information (In Digital Mode only). 43 Auto Programme Tuning (In Analogue Mode). 44 Manual Programme Tuning (In Analogue Mode). 45 Fine Tuning (In Analogue Mode). 46 Assigning a Station Name (In Analogue Mode). 46 Programme Edit (In Analogue Mode). 47 Selecting the Programme Table. 49 Input Source Selection. 50 SIMPLINK Function. 51
DVR (DIGITAL VIDEO RECORDER)
TimeShift Mode ( Pause & Replay of Live TV). 53 Instant Recording. 56 Manual Recording. 59 Recorded TV Programme List. 60 Schedule List. 64 Record Quality. 65 Format Hard Disc. 66

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup. 15 DVD Setup. 17 Insertion of CI module. 19 VCR Setup. 20 Digital Audio Out Setup. 22 Other A/V Source Setup. 23 PC Setup. 24 - Screen Setup for PC Mode. 27
EPG (Electronic programme guide)(In Digital Mode)
Switch on/off EPG. 67 Select programme. 67 Button function in NOW/NEXT guide mode. 67 Button function in 8 days guide mode. 68 Button function in date change mode. 69 Button function in extended description box. 69 Record Popup.70 Conflict pop-up.70
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions. 31 Turning on the TV. 33 Programme Selection. 34 Volume Adjustment. 34 On-Screen Menus Selection and Adjustment. 35 Auto Programme Tuning (In Digital Mode). 36 Manual Programme Tuning (In Digital Mode). 37 Programme Edit (In Digital Mode). 38 5V antenna Power (In Digital Mode only). 40 Booster (In Digital Mode only). 40 Software Update (In Digital Mode only). 41 Diagnostics (In Digital Mode only). 42

CAUTION

not look into the optical output port. Looking at the laser beam may damage your vision.

OTHER A/V SOURCE SETUP

Camcorder

Video Game Set

V Connect the A U D I O/V I D E O jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red)
Select AV3 input source using the I N P U T button on the remote control.
Operate the corresponding external equipment. Refer to external equipment operating guide.

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
ANTENNA RS-232C IN (CONTROL & SERVICE) IN
Connect the RGB output of the PC to the R G B ( P C) jack on the TV. Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. Turn on the PC and the TV. Select RGB input source using the I N P U T button on the remote control.

RGB OUTPUT

EJECT EJECT PCMCIA CARD SLOT HDMI/DVI IN 1 HDMI IN 2
Connect the DVI output of the PC to the H D M I / D V I ANTENNA I N jack on the TV. IN Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. Turn on the PC and the TV. Select HDMI1 input source using the I N P U T button on the remote control.

ANTENNA RS-232C IN NA IN

DVI-PC OUTPUT
If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. If the PC does not support Auto DVI, you need to set the output resolution appropriately.
enjoy vivid picture and sound, connect the PC to the TV. G Avoid keeping a fixed image on the TV s screen for prolonged periods of time.The fixed image may become permanently imprinted on the screen;use a screen saver when possible. G Connect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the TV; change the resolution output of PC accordingly. G There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. G RGB input only supports the separate horizontal and vertical synchronization pulses in separate channels. G We recommend using 1360x768, 60Hz (LCD TV models / 50 inch PLASMA TV models) / 1024x768, 60Hz (42 inch PLASMA TV models) for the PC mode, these should provide the best picture quality. G Connect the signal cable from the monitor output port of the PC to the RGB (PC/DTV) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.

SETUPO Auto Config. PICTUREO Manual Config. AUDIOO XGA Mode Aspect Ratio TIMEO Reset OPTIONO SCREEN

button to

D V RO
Press the G button to start Auto Config. When Auto Config. has finished, OK will be shown on screen. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Manual Config.

Move MENU Prev.

Auto Config. Manual Config. XGA Mode Aspect Ratio Reset

To Set

Press the EXIT button to return to normal TV viewing.

BACK EXIT

Adjustment for screen Phase, Clock, Position
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. To correct the screen size, adjust C l o c k.
This function works in the following mode : RGB[PC]. C l o c k This function is to minimize any vertical bars or stripes visible on the screen background the horizontal screen size will also change. P h a s e This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Press the MENU button and then use to select the SCREEN menu.

button

Phase Clock H-Position V-Position
Press the G button and then D or E button to select Manual Config. Press the G button and then D or E button to select Phase, Clock, H-Position or V-Position. Press the ments.
button to make appropriate adjust-

Selecting Wide XGA mode

To view a normal picture, match the resolution of RGB mode and selection of XGA mode This function works in the following mode: RGB[PC] mode
Press the MENU button and then use D or E button to select the SCREEN menu. Press the G button and then use D or E button to select XGA Mode. Press the G button and then use D or E button to select the desired XGA resolution. Press the EXIT button to return to normal TV viewing.

1024 X X X X 768

BACK DVR MENU GUIDE
Initialising (Reset to original factory settings)
This function operates in current mode. To initialise the adjusted value
It is not possible to use ISM Method and Low power in LCD TV models.

9 Q.VIEW

Press the MENU button and then select the OPTION menu.
Press the G button and then D or E button to select Factory Mode. Press the G button and then D or E button to select Factory Reset. Press the G button. The message If you enter a password, all user setting will be reset will appear.

OK Accepts your selection or displays the current mode.
SLEEP Sets the sleep timer. SUBTITLE Recalls your preferred subtitle in digital mode.
RATIO Selects your desired picture format. I/II Selects the sound output.

Installing Batteries

Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AA batteries. Do not mix old or used batteries with new ones. Close cover.

TURNING ON THE TV

- When your TV is turned on, you will be able to use its features.

INPUT D/A

Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode.

TV/RADIO INPUT BRIGHT

VCR SIMPLINK TEXT INFO i LIVE TV
In standby mode to turn TV on, press the r / I, INPUT or PR D or E button on the TV or press the POWER, INPUT, D/A, PR + or - or NUMBER button on the remote control and the TV will switch on.

BACK DVR MENU GUIDE EXIT

Initialising setup
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Country, Time Zone, Auto programme tuning.
Note: a. It will automatically disappear after approx. 40 seconds unless a button is pressed. b. Press the BACK button to change the current OSD to the previous OSD.

PROGRAMME SELECTION

Press the P R + or - or NUMBER buttons to select a programme number.

VOLUME ADJUSTMENT

Press the VOL + or - button to adjust the volume. If you wish to switch the sound off, press the MUTE button. You can cancel this function by pressing the MUTE, VOL + or - , or I/II button.
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Press the M E N U button and then D or E button to display each menu. Press the G button and then D or E button to select a menu item. Change the setting of an item in the sub or pull-down menu with F or G button. You can move to a higher level menu by pressing the O K or M E N U button.
SETUPG Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit 5V Antenna Power TIMEO Booster OPTIONO Software Update SCREENO Diagnostics D V RO CI Information SETUPO Picture Mode G Colour Temperature TIMEO SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO Digital Audio Out OPTIONO SCREENO D V RO

Press the MENU button and then select the SETUP menu. Press the G button and then Software update. Press the G button and then Off or On.

or E button to select

If you select On, a user confirm message box will be displayed to notify that new software is found.
* When setting Software Update
Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen.
- During Progress of a Software Update, please note the following: Select YES using the F or G button and you will see the following picture. Power to the TV must not be interrupted. The TV must not be switched off. The antenna must not be disconnected. During this time, you should not switch off the power to the TV. At this time, you should not work power On/Off. After Software Update, you can confirm the updated software version in Diagnostics menu. OTA cannot be performed while the DVR function(recording, playback) is running.
After the Software Update is complete, the System takes about one minute to restart.
DIAGNOSTICS (IN DIGITAL MODE ONLY)
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned MUX. This displays the signal information and service name of the selected MUX.
Press the M E N U button and then D or E button to select the SETUP menu.
Press the G button and then use D or E button to select Diagnostics.
Press the G button to display Manufacturer, Model/Type, Serial Number and Software Version.
Press the E X I T button to return to normal TV viewing.
Engineering Diagnostics i Channel 30 Manufacturer : LG Electronics Inc. Model / Type Transmitter : Teracom_Mux_2 : 37LC2D-EC Signal strength Serial No. : 604KG0000006 53% Software version : 1.1.0 Signal quality
CH 30 CH YLE PEU 3 YLE TVYLE FST 7 YLE FSR+

Menu Prev.

1 YLE TVYLEQ 6 YLEN KLASS 8 YLE24

Back Select

CI [COMMON INTERFACE] INFORMATION (IN DIGITAL MODE ONLY)
This function enables you to watch some scrambled services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output. This may be incompatible with the CI module and smart card. CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances.
Press the G button and then D or E button to select CI Information.
Press the G button and then OK button.
Press the D or E button to select the desired item: Module information, smart card information, language, or software download etc.

Module

Press the OK button.
This OSD is only for illustration and the menu options and screen format will vary according to the Digital pay services provider. It is possible for you to change CI (Common Interface) menu screen and service by consulting your dealer.

Viaccess Module

Consultations Authorizations Module information

Select the item

AUTO PROGRAMME TUNING (IN ANALOGUE MODE)
All stations which can be received are stored by this method. It is recommended that you use Auto tuning during installation of this TV. It is not possible to use this function while recording a programme.
Press the M E N U button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Auto Tuning. Press the G button to select System. Select a TV system with the F or G button; L : SECAM L/L (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
SETUPG Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit TIMEO OPTIONO SCREENO D V RO
Press the E button to select Storage From. Select the initial programme number with the F or G button or NUMBER buttons on the Storage From menu.
Press the E button to select Start. The station name is stored for stations which broadcast VPS (Video Programme Service), PDC (Programme Delivery Control) or TELETEXT data. If no station name can be assigned to a station, the channel number is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47), followed by a number. To stop auto tuning, press the MENU button. When auto tuning is complete, the Programme Edit menu appears on the screen. See the Programme Edit section to edit the stored programme.

Auto Tuning Manual Tuning Programme Edit
System Storage From Start
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. It is not possible to use this function with TimeShift Mode On.
Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Manual Tuning. Press the G button to select Storage. Select the desired programme number with the F or G button or NUMBER buttons on the Storage menu.

Q.VIEW

Press the E button to select System. Select a TV system with the F or G button; L : SECAM L/L (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
Press the E button to select Band. Press the F or G button to select V/UHF or Cable as required. Press the E button to select Channel. You can select the desired channel number with the F or G button or NUMBER buttons. If possible, select the channel number directly with the NUMBER buttons.

Storage

1 BG V/UHF 1
System Band Channel Fine Search Name C
Press the E button to select Search. Press the F or G button to commence searching. If a station is found the search will stop. Press the OK button to store settings. To store another station, repeat steps 3 to 8. Press the EXIT button to return to normal TV viewing.
FINE TUNING (IN ANALOGUE MODE)
Normally fine tuning is only necessary if reception is poor.
EXIT TIME SHIFT BACK MENU GUIDE
Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Manual Tuning. Press the G button and then D or E button to select Fine. Press the G button and then F or G button to fine tune for the best picture and sound. Press the OK button to store settings. Press the EXIT button to return to normal TV viewing.

SIMPLINK Menu

Press the D or E or F or G button and then OK button to select the desired SIMPLINK source.
T V v i e w i n g : Switch to the previous TV programme regardless of the current mode. D I S C p l a y b a c k : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. V C R p l a y b a c k : control the connected VCR. H D D R e c o r d i n g s p l a y b a c k : control recordings stored in HDD. Audio Out to Home theatre/Audio Out to TV: Select Home theatre or TV speaker for Audio Out.
Selected Device When no device is connected (displayed in gray)
When a device is connected (displayed in bright colour)
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G After connecting the HDMI terminal for the home theatre with the SIMPLINK function using the above method, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with the OPTICAL cable. G When operating an external device with SIMPLINK, press the TV button from the MODE buttons on the remote control. G When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device controlled by SIMPLINK. G When you select or operate a media device with home theatre function, the speaker automatically switches to home theatre speaker (HT speaker). G If SIMPLINK is operated, the keys such as stop / play / pause / fast reverse / fast forward / chapter skip are used for driving the SIMPLINK device, but are not used for the DVR feature.
TIMESHIFT MODE (PAUSE & REPLAY OF LIVE TV)
This function allows the unit to automatically record live TV and make it available for viewing at any time. With the TimeShift Mode turned on, you may pause and rewind normal TV viewing at any time without missing any of the live broadcast. (TimeShift Mode and Recording functions may not work if the signal strength is weak.)
Press the M E N U button and then use D / E button to select the D V R menu.
Press the G button and then use D / E button to select the TimeShift Mode.
Press the G button and then use D / E button to select O n or O f f.
TimeShift Mode Record Quality Recorded TV Schedule List Manual Record HDD Format
Using the TimeShift Mode function

LIVE 3 4

The Progress Bar?
After selecting TimeShift Mode On, press the O K button. As soon as TimeShift Mode starts, a progress bar indicating the current recording status is displayed in the bottom of the screen. Press the E X I T button to hide the Progress Bar or press the O K button to display the 'Progress Bar'. This function is preserved even when changing a programme or progressing the TimeShift Mode.

Manual Record

Input DTV Programme 1 BBC ONE Date Fri Mar 30 Start 10:26 Fri Mar 30 10:24 End Repeat 10:56 Once

Navigation

Modify

Cancel

RECORDED TV PROGRAMME LIST
You can view the recorded programme list at a glance. This function is also available in the DVR menu. Information function is only applicable when the country selected is UK.
Press the D V R button to display H O M E menu. Use the D or E button to select Recorded TV and then use the O K or G button.
Free Space 23h 01m 3h 01m Page 3/27 To Buy or Not to Buy In the Night Garden Schools : Primary Geog
Input Date Duration Quality

: : : :

DTV 1 Fri Mar 30m High

0 Marked

Recorded TV Programme Guide Schedule List

Fri Fri Fri Fri Fri

Mar 30 Mar 30 Mar 30 Mar 30 Mar 30
10:49 10:36 10:36 10:21 10:20

Class TV : Revisewise

Manual Record TV Menu

30 Jahre 68 : Revolte

Information Move Page

EXIT MARK

Exit Mark

Popup Menu

When the highlighted recording is a locked programme or a rated programme, the preview window displays LOCKED SERVICE instead of the Play screen. If you wish to play locked or rated recordings, you must enter the password.
Recorded TV Input Date Duration Quality : : : : DTV 1 Fri Mar 30m High
0 Marked Fri Mar 30 10:49 10:36 10:36 10:21 10:20

LOCKED SERVICE

Free Space 23h 01m 3h 01m Page 3/27 To Buy or Not to Buy In the Night Garden
Fri Enter Password Mar 30

Schools : Primary Geog

- Mar 30

Mar 30 Mar 30

Class TV : Revisewise 30 Jahre 68 : Revolte

Fri Fri

In the case of recording an Audio only programme the preview window displays AUDIO ONLY instead of the Play screen.
0 Marked Fri Fri Fri Fri Fri Mar 30 Mar 30 Mar 30 Mar 30 Mar 30 10:49 10:36 10:36 10:21 10:20

AUDIO ONLY

Free Space 23h 01m 3h 01m Page 3/27 To Buy or Not to Buy In the Night Garden Schools : Primary Geog Class TV : Revisewise 30 Jahre 68 : Revolte
When scheduled recording fails for various reasons such as signal strength, it is registered in the Recorded TV List and the Preview window displays the OSD as shown in the diagram. When you press the OK button to execute the failed recording, a message is displayed as shown in the picture.
Recorded TV Input Date Duration Quality
Free Space 23h 01m 3h 01m Page 3/27 To Buy or Not to Buy Fri 0 Marked Mar 30 10:49 10:36 10:36 10:21 10:20
Schedule In the Night Garden
recordingMar 30 failed Fri due to no signal. Do you want to delete? Schools : Primary Geog Fri Mar 30
Class TV : Revisewise YES 30 Jahre 68 : Revolte Fri Fri Mar NO 30 Mar 30
Recorded programme Selection and Popup Menu
The preview recorded list is shown above.

Play a recorded programme. While playing, You will see a playback screen as shown below. Initially, an icon showing the current playback mode is displayed PLAYING. Press the O K button to display the progress bar To stop displaying the recorded programmes icon, press the E X I T button.

PLAYING 5 6

You can shift playback to any point within the recorded programme. When playing, repeatedly, press the R E W( FF) button to speed up F -> FF -> FFF -> FFFF -> FFFFF. repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG.
Press the P a u s e ( I I) button and then use the F F (GG) button for slow motion (as showing the.) When using the F or G button during playback the cursor can be viewed on the screen.
Press the P L A Y ( G) button to return to normal playback. If you want to return to the current live broadcast, press the L I V E T V button.
If you press the S T O P (A) button, you can view live TV.

Chase playback

During recording, you can Trick play a programme that is being recorded without interrupting recording by using the Progress Bar.
The Progress Bar? This function indicates what DVR reviewing is possible ,a current onscreen and live broadcasting position, a section of section-recording. 1 Indicates progress of recorded programme. 2 Indicates status of recording programme. 3 Indicates elapsed recording time. 4 Indicates total recording time. 5 Indicates a quarter of programme runtime. 6 Indicates current playback position.
Record a programme. While recording, You will see a playback screen as shown below. Initially, an icon showing the current playback mode is displayed REC. Press the O K button to display the progress bar To stop displaying the recorded programmes icon, press the E X I T button.

REC 5 6

You can shift playback to any point while recording programme. When playing, repeatedly, press the R E W( FF) button to speed up F -> FF -> FFF -> FFFF -> FFFFF. repeatedly, press the F F ( GG) button to speed up GG-> GGG -> GGGG -> GGGGG.
During recording, press the P a u s e( I I) button. Still screen is displayed. Repetedly press the P a u s e ( I I ) button to advance frame by frame.

13:00 15:12 5:34 6:00 7:35 15:21 22:00

Popup Menu Guide

Move Page Weekly Schedule
Information Manual Record

RECORD QUALITY

This function is not available while a recording is taking place. (Only for analogue schedule recording)
Press the M E N U button and then use D / E button to select the D V R menu. Press the G button and then use D / E button to select Record Quality. Press the G button and then use D / E button to select H i g h or Normal. Press the EXIT button to return to normal TV viewing.

High Normal

Only for analogue schedule recording (TV, AV1, AV2, AV3).

FORMAT HARD DISK

Erases all programmes and initialises the hard drive.
Press the M E N U button and then use D / E button to select the D V R menu. Press the G button and then use D / E button to select HDD Format. Press the G button to start HDD Format. if you press the G button, this message is displayed.
Do you want to format HDD?

Yes No

To set
if you select Yes, this message is displayed.
HDD format in progress. 2 3
When completing, this message is displayed.
HDD initialisation successful.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster). This function can be used only when the EPG information is broadcast by broadcasting companies. The EPG displays the programme details for next 8 days.

Switch on/off EPG

Press the GUIDE button to switch on EPG. Press the GUIDE or EXIT button again to switch off EPG and return to normal TV viewing.

Select a programme

Programme Guide 1 BBC ONE 08:Mar 08:Mar 08:30 Breakfast Cramp. Chuck. To. 09:00 Don.
EPG (ELECTRONIC PROGRAMME GUIDE)
Press the D or E, F or G, PR + or - button to select the desired programme, then the OK button, the popup window to select the function is displayed.

Temperature in the PICTURE menu. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 0: Cool Ack 1: Medium 2: Warm 3: User
[u][ ][Set ID][ ][OK][Data][x] 16. Red Adjustment (Command 2 : v)
G To adjust red in colour temperature.
Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 50 16. * Refer to Real data mapping 2. See page 1 Ack [v][ ][Set ID][ ][OK][Data][x] 17. Green Adjustment (Command 2 : w)
G To adjust green in colour temperature.
[k][l][ ][Set ID][ ][Data][Cr] Data 0 : OSD off Ack 1 : OSD on
[k][w][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 50 16. * Refer to Real data mapping 2. See page 1 Ack [w][ ][Set ID][ ][OK][Data][x] 18. Blue Adjustment (Command 2 : $)
[l][ ][Set ID][ ][OK][Data][x] 1 3. Remote control lock mode ( C o m m a n d 2 : m )
G To lock the front panel controls on the monitor and
remote control. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 0 : Lock off Ack 1 : Lock on
G To adjust blue in colour temperature.
[k][$][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 50 16. * Refer to Real data mapping 2. See page 1 Ack [$][ ][Set ID][ ][OK][Data][x]
[m][ ][Set ID][ ][OK][Data][x] * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released.
19. Abnormal State (Command 2 : z)
G To recognize an abnormal state.
21. Low Power (Command 1 : j, Command 2 : q)
G To reduce the power consumption of the TV. You can
[k][z][ ][Set ID][ ][FF][ ][Cr] Data FF : Read Ack [z][ ][Set ID][ ][OK][Data][x] Data 0: Normal (Power on and signal exist) 1: No signal (Power on) 2: Turn the TV off by remote control 3: Turn the TV off by sleep time function 4: Turn the TV off by RS-232C function 5: 5V down 6: AC down 7: Turn the TV off by Fan Alarm function 8: Turn the TV off by Off time function 9: Turn the TV off by Auto sleep function * This function is read only.
also adjust Low Power in OPTION menu. It is not possible to use this function with LCD TV models. Transmission [j][q][ ][Set ID][ ][Data][ ][Cr] Data 0 : Off 1 : On Ack [q][ ][Set ID][ ][OK/NG][Data][x]
22. Orbiter Time Setting (Command 1 : j, Command 2 : r)
G To adjust orbiter operation time term.
It is not possible to use this function with LCD TV models. Transmission [j][r][ ][Set ID][ ][Data][ ][Cr] Data Min: 1 ~ Max: FE * Refer to Real data mapping 1. Ack [r][ ][Set ID][ ][OK/NG][Data][x]

20. ISM Method (Command 1 : j, Command 2 : p)
G To control the ISM method. You can also adjust ISM
Method in OPTION menu. It is not possible to use this function with LCD TV models. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 0: Normal 1: White wash 2: Orbiter 3: Inversion
23. Orbiter Pixel Setting (Command 1 : j, Command 2 : s)
G To adjust pixel number in orbiter function.
[p][ ][Set ID][ ][OK/NG][Data][x]
It is not possible to use this function with LCD TV models. Transmission [j][s][ ][Set ID][ ][Data][Cr] Data Min: 1 ~ Max: 3 * Refer to Real data mapping 1. Ack [s][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 73 : Step 74 : Step C7: Step 199 FE : Step 254 FF : Step 255
* Real data mapping : -: -: -:0 4E : +38 4F : +: +40
24. Auto Configure (Command 1 : j, Command 2 : u) G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]
27. Input select (Command 1 : x, Command 2 : b)
G To select input source.
[x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 LSB 0
External Input 25. Channel Select Command (Command 1 : m, Command 2 : a)
G Select channel to following physical number.
Input Number Data DTV Analogue AV Component RGB HDMI Data Input1 Input2 Input3 Input4

External Input 0 0

[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Data0 :High channel data Data1 :Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> (188H), DTV No. 0 -> Dont care Data2 0x00 : ATV Main 0x10 : DTV Main Channel data range Analogue - Min: 00 ~ Max: 63 (0~99) Digital - Min: 00 ~ Max: 3E7 (0~999)

Input Number 1 1

[a][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 ~ Max: 7D
26. Send IR Code (Command 1 : m, Command 2 : c)
G To send IR remote key code.
[b][ ][Set ID][ ][OK/NG][Data][x]
[m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 1 10.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]