HOME MENU
This menu is a contents guide. In Home Menu, you enter the Recorded list of TIME MACHINE, Manual Recording of TIME MACHINE, Schedule List ,Photo List, Music List, Movie List or TV Menu.
INPUT TV INPUT POWER MODE TV DVD BRIGHT RATIO SIMPLINK VCR

Free Space

HIGH NORMAL

PIP PR- PIP PR+

SWAP PIP INPUT
Recorded TV Manual Record

LIST MENU

G p.50

LIVE TV EXIT

Schedule List Photo List

7 G p. 6 6~7 4

TIME SHIFT

Music List

FAV/ MARK

Movie List

TV Menu

FRONT PANEL CONTROLS

This is a simplified representation of the front panel. Image shown may differ from your TV. If your TV has a protection film attached, remove the film and then wipe the product with a polishing cloth.

Plasma TV Models

Remote Control Sensor
Power/Standby Indicator illuminates red in standby mode. illuminates green when the TV is switched on. illuminates orange when the TV is switched off during recording.

INPUT MENU OK VOL PR

INPUT MENU OK VOL

VOLUME

PROGRAMME

LCD TV Models

Intelligent Eye Adjusts picture according to the surrounding conditions. Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates green when the TV is switched on. illuminates orange when the TV is switched off during recording.

OK MENU

OK MENU INPUT POWER

BACK PANEL INFORMATION

This is a simplified representation of the back panel. Image shown may differ from your TV.

AV IN 2 V

USB Input

AV IN 2

S-VIDEO
L/MONO VIDEO L/ MONO AUDIO R
S-Video Input Connect S-Video out from an S-VIDEO S-VIDEO device.

VIDEO L/MONO AUDIO R

RGB IN HDMI IN 2

HDMI/DVI IN 1 RGB IN

Audio/Video Input Connect audio/video output from an external device to these jacks.

MI/DVI IN 1

AV IN 1

HDMI/DVI HDMI/DVI IN

HDMI IN 2

HDMI IN

R AUDIO L/MONO VIDEO

RGB AV OUT IN RGB

AUDIO (RGB/DVI)

COMPONENT IN 1

COMPONENT IN
VARIABLE AUDIO OUT VARIABLE AUDIO OUT VIDEO
VARIABLE AUDIO OUT ARIABLE AUDIO
HDMI/DVI1, HDMI2 Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. RGB/Audio Input Connect the monitor output from a PC to the appropriate input port.

! NOTE

When moving the TV undo the cords first. Use a platform or cabinet string and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
BACK COVER FOR WIRE ARRANGEMENT
Grip the C A B L E M A N A G E M E N T and push the cover upwards

CABLE MANAGEMENT

Connect the cables as necessary. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section.
Reinstall the C A B L E M A N A G E M E N T as shown
Bundle the cables together using the supplied twister holder. (This feature is not available for all models.)
How to remove the cable management
Hold the C A B L E M A N A G E M E N T with both hands and pull it upward.
G Do not use the CABLE MANAGEMENT to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.
The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally.

EARTHING

Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit breaker
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4 (10cm) all around the TV.

4 inches

WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4 (10cm) all around the TV. Detailed installation instruc-tions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.
4 inches 4 inches 4 inches 4 inches
It is recommended that 42PB4RTH / 50PB4RTH model only be used at an altitude of less than 6561 feet (2000m) to get the best quality picture and sound. S-VIDEO I To prevent damage do not connect to the mains outlet until all connections are made between the devices.
VIDEO L/MONO AUDIO R USB IN

ANTENNA CONNECTION

For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied.
R AUDIOVIDEO L/MONO AUDIO R L/MONO VIDEO

HDMI/DVI IN 1

2 COMPONENT IN VARIABLE AUDIO OUT

VARIABLE AUDIO OUT

RF Coaxial Wire (75 ohm)

Outdoor Antenna

Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV.
Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O jacks on the TV.
Turn on the DVD player, insert a DVD.
Refer to the DVD player's manual for operating instructions.

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below. HDMI/DVI IN HDMI IN
Component ports on the TV

PB B-Y Cb Pb

PR R-Y Cr Pr
Video output ports on DVD player
Connecting with an S-Video cable
Connect the S-VIDEO output of the DVD to the S V I D E O input on the TV. Connect the audio outputs of the DVD to the A U D I O input jacks on the TV. Turn on the DVD player, insert a DVD. Select AV2 input source using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.

ANT IN

ONENT IN

OUTPUT SWITCH

ANT OUT
Connecting the HDMI cable
Connect the HDMI output of the DVD to the H D M I / D V I I N 1 or H D M I I N 2 jack on the TV.
TV can receive the video and audio signal simultaneously with using a HDMI cable. If the DVD player does not support Auto HDMI, you must set the output resolution appropriately.

VCR SETUP

To avoid picture noise (interference), allow adequate distance between the VCR and TV. I Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.
Connecting with a RF Cable

Wall Jack

ABLE O OUT
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
Connect the antenna cable to the A N T I N socket of the VCR.
Press the P L A Y button on the VCR and match the appropriate programme between the TV and VCR for viewing.
Connecting with a RCA cable
V Connect the A U D I O/V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.)
Select AV1 input source using the I N P U T button on the remote control. If connected to A V I N 2, select AV2 input source.
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the TV.
R AUDIO L/MONO VIDEO L/ MONO

V AV IN 1

Connecting with a S-Video cable
Connect the S-VIDEO output of the VCR to the S V I D E O input on the TV. The picture quality is improved; compared to normal composite (RCA cable) input.
Connect the audio outputs of the VCR to the AUDIO input jacks on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV2 input source using the I N P U T button on the remote control.

Screen Auto Config. Manual Config. XGA Mode Reset Phase Clock H-Position V-Position
button to make appropriate adjustments.

Selecting Wide XGA mode

To view a normal picture, match the resolution of RGB mode and selection of XGA mode. This function works in the following mode: RGB mode.
Advanced TIMEO Aspect Ratio OPTIONO Picture Reset TIME MACHINEO Screen Demo
Press the G button and then use D / Screen.

button to select

Press the G button and then use D / XGA Mode.
Press the G button and then use D / the desired XGA resolution.

Screen

Auto Config. Manual Config. XGA Mode Reset

1024 X X X X 768

Initializing (Reset to original factory settings)
This function operates in current mode. To initialize the adjusted value
Press the MENU button and then use D / select the PICTURE menu.
Press the G button and then use D / Reset.

Press the G button.

REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV. POWER Switches the TV on from standby or off to standby.
TV INPUT Returns to the TV viewing from any mode. Switches the TV on from standby. INPUT If you press the button once, the input source OSD will appear on screen as shown. Press the D / E button and then OK button to select the desired input source (TV, AV1, AV2, Component1, Component2, RGB, HDMI1/DVI or HDMI2).
RATIO Selects your desired picture format. Brightness Adjusts screen brightness. adjustment This returns to the default settings brightness by changing mode source.
PIP Switches the sub picture PIP, DW mode. PIP PR - /+ Selects a programme for the sub picture.
SWAP Exchanges the main/sub images in PIP/DW. PIP INPUT Selects the input source for the sub picture in PIP/DW picture mode.
SIZE Adjusts the sub picture size.
POSITION Moves the sub picture. TIME MACHINE/ Controls video cassette recorders or DVD players when VCR/DVD you select DVD or VCR mode button. Control connected AV devices by pressing the D / E / control buttons F / G, O K buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip. (The button does not provide such functions.) Use for TIME MACHINE record or trick play. MENU Selects a menu. LIST Displays the programme list.

Q.VIEW

SIZE TIME

Press the G button to begin auto tuning. All receivable stations are stored.

Auto Tuning

C 04 M 1
To stop auto tuning, press the M E N U button. When auto tuning is complete, the Programme Edit menu appears on the screen. See the Programme edit section to edit the stored programme.

System Storage

MENU Stop
Press the E X I T button to return to normal TV viewing.

MANUAL PROGRAMME TUNING

Manual programme lets you manually tune and arrange the stations in whatever order you desire.
It is not possible to use this function with TimeShift Mode On. It is not possible to use this function whilst recording a programme.
Press the M E N U button and then D / E button to select the SETUP menu. Press the G button and then D / E button to select Manual Tuning. Press the G button and then D / E button to select Storage. Press the F / G button or NUMBER buttons to select the desired programme number (0 to 99). If you use NUMBER buttons, any number under 10 is entered with a numeric 0 in 0 front of it, i.e. for 5. Press the D / E button to select System. Press the F / G button to select a TV system menu; BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / NewZealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) M : (USA / Korea / Philippines) Press the D / E button to select Band. Press the G button and then F / G button to select V/UHF or Cable. Press the D / E button to select Channel. You can select the desired programme number with the F / G button or number buttons. If possible, select the programme number directly with the number buttons. Any number under is entered with a numeric 0 in front of it, i.e. for 5. Press the D / E button to select Search. Press the F / G button to commence searching. If a station is found the search will stop. Press the O K button to store it. To store another station, repeat steps 3 to 1 3. Press the E X I T button to return to normal TV viewing.

Storage

G F G5
System Band Channel Fine Search Name C Booster Store

BG V/UHF 5

05 Off

FINE TUNING

Normally fine tuning is only necessary if reception is poor.

Status of current displayed video. Current save time. 15 minute intervals from TimeShift Mode start time. (Total - one hour). Indicates current TimeShift Mode position.
When finishing the Timeshift function, enter the TIME MACHINE menu and turn TimeShift Mode Off.
TIME MACHINE : A device which records and plays broadcast programme contents onto a hard disk in set or SET TOP BOX. G In order to save hard-disk space, nothing is saved when there is no signal. The total storage space of the hard-disk is 80 GB. G 4 GB minimum is reserved for TimeShift Mode. G When turning power on, it may take up to a maximum of 3 minutes to initialize the HDD. G The Recording function will not initiate for a copy-protected programme. G Because an analogue broadcast is converted to a
digital signal, video which contains rapid movement may show "cross stripes". This happens when the analog signal is compressed and then restored in the digital signal. The unit will attempt to reduce excessive picture interference. G When using the PIP/DW mode, Timeshift is stopped. G TimeShift Mode is available in TV, AV1, AV2, Component(480i/480p/576i/576p/720p/1080i ) mode. G TimeShift Mode is not available for Audio only channels. G Maximum recording file size is up to 16GB(4Hr).
Using the TimeShift Mode function, play
- When in timeshift mode, the following options are available.
DELAYED DELAYED Indicates that the current broadcast and displayed video differ.

TIME SHIFT LIST MENU

When pressing the O button delaying Timeshift, Timeshift is dumped. And delayed time is recording.

Using the remote control

You can shift playback to any point within the recorded programme When playing, repeatedly, press the R E W( FF) button to speed up FF -> FFF -> FFFF -> FFFFF ->FFFFFF. repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG -> GGGGGG.
Pressing these buttons repeatedly increases the fast forward/reverse speed.

I FF /

Press the
button to jump about 20 seconds forward.
Pressing the I FF button to jump about 8 seconds back.
During playback, press the P a u s e ( I I) button. I Still screen is displayed. I Repeatedly press the P a u s e ( I I ) button to advance frame by frame. II Press the P a u s e ( I I) button and then use the F F (GG) button for slow motion (the icon is displayed.) I Press the P a u s e ( I I ) button and then use the F F ( FF ) button for slow motion (the icon is displayed.)

10 : 07

Play Mark All Delete
Menu Navigation Popup Menu Move Page
<HDD Backup process screen>
USB Backup is started. Copying to USB HDD (1/1)

75% Close Stop

Rename Copy to USB HDD Cancel
if you press the A button, this message is displayed.
Do you really want to cancel the backup?
When 'Yes is selected, the backup is cancelled and is converted back to input mode. If more than two files are transferred, the transferred file is stored, and the backup operations on the files in progress of transferring and scheduled for backup are cancelled. I When No is selected, returns to the backup process screen.
While backup is being performed in the background, the status of the copy progress can be checked by pressing the OK button.

Copying 0%( 1/1 )

C a n c e l : Close the Pop-up menu.
Repeatedly, press the E X I T button to return to TV viewing or press the T I M E M A C H I N E button to return to the H o m e menu.
If the HDD has a problem performing a recording related function, this message is displayed. If the temperature is below zero (0), a warning message is displayed and you will not be able to use the TIME MACHINE functions.
HDD initialisation is in progress.
Cannot operate TIME MACHINE at low temperature. 4

USB BACKUP

- When the Recorded List is stored exceeding the capacity of the internal HDD, the USB backup feature allows the backup of Recorded List of the internal HDD to the external HDD for backup connected through USB. - To use USB backup function, be sure to initialize the USB HDD using TIME OK MACHINE menu- USB HDD format. - To use USB Backup, USB HDD is necessary more than 40 GB, 1 partition disk, and FAT32 system. - It only supports file backup features; therefore, playback of the Recorded List directly from the current OSD is not allowed. In order to play the recorded contents, the files must be moved to the internal HDD through the Copy to Recorded List from the popup menu. - View the list of the backed up recorded programme by using the Copy to USB HDD from the Recorded TV'. - It moves to the external HDD list for backup connected by USB.

SETUPO PICTURE O AUDIOO

TimeShift Mode Record Quality Recorded TV Schedule List Manual Record HDD Format DivX Reg. Code Backup USB Backup USB HDD Format Subtitle To set

Playing recorded programmes
- You can play a selected programme from the recorded programme list.
Play a recorded programme. While playing, You will see a playback screen as shown below.
To stop displaying the recorded programmes icon, press the EXIT button.

PLAYING YING PLA

This function indicates what TIME MACHINE reviewing is possible ,a current on-screen and live broadcasting position, a section of section-recording. 1 Indicates progress of recorded programme. 2 Indicates status of recorded programme. 3 Indicates elasped playback time. 4 Indicates total playback time. 5 Indicates a quarter of programme runtime. 6 Indicates current playback position.
You can shift playback to any point within the recorded programme. When playing, repeatedly, press the R E W( FF) button to speed up FF -> FFF -> FFFF -> FFFFF ->FFFFFF. repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG -> GGGGGG.

Press the I FF / GGI

Pressing the I FF button to jump about 8 seconds backward.
During playback, press the P a u s e ( I I ) button. I Still screen is displayed. I Repeatedly press the P a u s e ( I I ) button to advance frame by frame. Press the P a u s e ( I I ) button and then use the F F (GG) button for slow motion (the icon is displayed.) I Press the P a u s e ( I I ) button and then use the F F ( FF ) button for slow motion (the icon is displayed.)
P L A Y ( G) LIVE TV S T O P ( A)
Press the P L A Y ( G) button to return to normal playback. Press the LIVE TV button to jump at the front of the programme.
If you press the S T O P (A) button, you can view live TV.

TIME MACHINE PHOTO LIST

Its available to playback the photo file(*.jpg) in the USB device.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
Supports up to four drives.
PHOTO(*.JPEG) supporting file Baseline: width<=4800, height is no limit You can play JPEG files only. Only baseline scan is supported among JPEG. Non-supported files are displayed in the form of icon.
Press the T I M E M A C H I N E button and then use D / E button to select the Photo List menu.

Photo List

USB Device

Drive1

Recorded TV Manual Record Schedule List Photo List Music List Movie List TV Menu

Press the M E N U button and then D / select the OPTION menu.
Normal White Wash Orbiter Inversion
Press the G button and then D / ISM Method.
Press the G button and then D / E button to select either Normal, White Wash, Orbiter or Inversion. If you do not need this function, set Normal

LOW-POWER PICTURE MODE

This function allows you to reduce the power consumption of the TV.
It is not possible to use this function in LCD models.
Press the M E N U button and then D / select the OPTION menu. Press the G button and then D / Low Power. Press the G button and then D / On or Off.

AUTO VOLUME LEVELER

Auto Volume automatically remains on the same level of volume if you change programmes.
Press the M E N U button and then D / the AUDIO menu.
Press the G button and then D / Volume.
Sound Mode Auto Volume Balance TV Speaker
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; SRS TSXT, Standard, Music, Movie or Sports and you can also adjust the frequency of the equalizer. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. S R S T S X T, S t a n d a r d, M u s i c, M o v i e, and S p o r t s are preset for optimum sound quality at the factory and are not adjustable. S R S T S X T Select this option for the most realistic sound. S t a n d a r d Commanding and natural audio. Music Select this option to enjoy the original sound when listening to music. Movie Select this option to enjoy sublime sound. Sports Select this option when watching sports broadcasting. User Select this option for user-defined audio settings.
SRS TSXT Standard Music Movie Sports User
Press the G button and then D / E button to select Sound Mode.
Press the G button and then D / E button to select SRS TSXT, Standard, Music, Movie, Sports or User.
is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

TruSurround XT

SOUND SETTING ADJUSTMENT -USER MODE
Adjusting the audio equalizer.
Press the G button and then D / Sound Mode.
Select a frequency band by pressing the F / G button. Set the desired sound level with the D / E button.
User 120Hz 200Hz 500Hz 1. 2KHz 3KHz 7. 5KHz 12KHz

BALANCE

You can adjust the sound balance of the speakers to the preferred levels.

button to select-

Press the G button and then D / E button to select Balance.
Press the G button and then F / desired adjustment.

button to make

TV SPEAKER ON/OFF SETUP
You can adjust the internal speaker status.
In AV, COMPONENT, RGB and HDMI mode, internal speaker audio can be operational even when there is no video signal. If you want to use your external hi-fi stereo system, turn off the internal speakers of the TV.

Speaker.

button to select TV
Press the G button and then D / On or Off.

Stereo/Dual Reception

When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast Mono Stereo Dual

On Screen Display

MONO STEREO DUAL I
Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice. In mono reception, the clarity of sound is improved. To switch back to stereo, press the I / I I button twice. Language selection for dual language broadcast If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I / I I button repeatedly.

DUAL I DUAL II DUAL I+II

Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker.

NICAM Reception

If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received as by pressing the I/II button repeatedly.
When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O.
When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O. If the stereo signal is weak, switch to F M M O N O.
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or N I C A M D U A L I + I I or M O N O.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I / I I button to select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent to the right loudspeaker. L+L: Audio signal from audio L input is sent to left and right loudspeakers. R+R: Audio signal from audio R input is sent to left and right loudspeakers.

ON-SCREEN MENU LANGUAGE SELECTION
The menus can be shown on the screen in the selected language. First select your language.
Press the M E N U button and then use D / E button to select the OPTION menu.
Press the G button and then use D / Language.
Press the G button and then use D / desired language.

button to select your

Press the O K button.

CLOCK SETUP

You must set the time correctly before using on/off timer function.
Press the M E N U button and then D / the TIME menu.
Press the G button and then D / Clock.
Press the G button and then F / the year, date, or time option.

button to select either

Clock Off Time On Time Sleep Time Auto Sleep
Once selected, use the and time options.
button to set the year, date,

Year Date Time

/ 20 :
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. The Off time function overrides the On timer function if both are set to the same time. The TV must be in standby mode for the On Timer to work.
Press the G button and then D / E button to select On/Off Time.
Press the G button and then D / E button to select On. To cancel On/Off Time function, select Off.

button to set the hour.

Press the G button and then D / minutes.

button to set the

For On Time function only P r o g r a m m e: Press the G button and then D / E button to select the programme. V o l u m e: Press the G button and then D / E button to adjust volume level at switch-on.

Vol. PR

SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed.
Press the S L E E P button repeatedly to select the number of minutes. The display - - -Min will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.

There is a problem in PC mode. (Only PC mode applied) The signal is out of range. Vertical bar or stripe on background & Horizontal Noise & Incorrect position Screen colour is unstable or single colour
Adjust resolution, horizontal frequency, or vertical frequency. Check the input source.
Use Auto configure or adjust clock, phase, or H/V position.
Check the signal cable. Reinstall the PC video card.

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to swith the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Do not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges.

PRODUCT SPECIFICATIONS

MODELS 32LB5R* 32LB5RT-TB Dimensions

(Width x Height x Depth)

37LB5R* 37LB5RT-TB
927 x 693x 281mm 36.5x 27 x 1 inches.3 1.x 630x 88 mm 36.5x 24.8 x 3.5 inches 2 kg / 46.3 lbs kg / 37 lbs 7.5 AC1 00-240V~ 50/60Hz 2.0A

42LB5R* 42LB5RT-TB

1 033.4 x 750.0 x 287 mm.6 40.7x 29.5 x 1 inches 1.033.4 x 686.8 x 88.5 mm 40.7 x 27 x 3.5 inches.0 25.4 kg / 56.0 lbs 20.9kg / 46.1 lbs AC1 00-240V~ 50/60Hz 2.5A

with stand without stand

806.6 x 607 x 249.0 mm.x 23.9 x 9.8 inches 1.8 806.6 x 552.3 x 97 mm.x 21.7x 3.8 inches 1.kg / 33.7 lbs 5.kg / 27 lbs 2.5.6 AC1 00-240V~ 50/60Hz 1.5A

Weight

Power requirement

MODELS

47LB5R* 47LB5RE-TB

52LB5R* 52LB5RE-TB

1 284.6 x 901.8 x 356.9 mm 50.6x 35.5 x 1 inches 4.284.6 x 83 x 11.5 mm 1.50.6 x 32.7x 4.4 inches 49.6 kg / 1 09.3 lbs 4 1.5kg / 91.4 lbs AC1 00-240V~ 50/60Hz 3.7A

Dimensions

1 44.5 x 825.6 x 306.4 mm 1 45.1 x 32.5 x 1 inches 2.44.5 x 754.9 x 1 mm 3 x 29.7x 4.1 inches 1.8 33.4 kg / 73.6 lbs 27 kg / 60.1.3 9lbs AC1 00-240V~ 50/60Hz 3.2A
Power requirement Television System Program Coverage External Antenna Impedance Operating Temperature Environment condition Operating Humidity Storage Temperature Storage Humidity

FF GG GGI MENU LIST TIME MACHINE LIVE TV EXIT UP(D) DOWN(E) LEFT(F) RIGHT(G) OK( ) VOL + VOL PR + PR FAV/MARK MUTE Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 Number Key 0 SLEEP Q.VIEW SIZE POSITION INDEX TIME HOLD REVEAL DivX
Note R/C BUTTON R/C BUTTON(POWER ON/OFF) R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON
EXTERNAL CONTROL DEVICE SETUP
Its not available to use this function in TIME MACHINE mode. Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the TVs functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. RS-232C connection cables are not supplied with the TV.

RS-232C Setup

RGB IN VI IN HDMI IN 2

OMPONENT IN

Type of Connector; D-Sub 9-Pin Male

No. 9 Pin Name

No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection
RS-232C RS-232C IN (CONTROL&SERVICE) (CONTROL&SERVICE) (CONTROL&SERVICE)

RS-232C Configurations

Please make sure the RS-232C configuration below. If you use different kind of RS-232C cable, system error may occur. 3-Wire Configurations PC RXD TXD GND DTR DSR RTS CTS 8 D-Sub 9 TV 8 D-Sub 9 TXD RXD GND DTR DSR RTS CTS

Set ID

Use this function to specify a set ID number. Refer to Real Data Mapping1. See page p.121
Press the G button and then use D / E button to select Set ID.
Press the G button and then use F / G button to adjust Set ID to choose the desired TV ID number. The adjustment range of SET ID is 1~99.