EXTERNAL EQUIPMENT SETUP

HD Receiver Setup.. 27 DVD Setup... 29 VCR Setup... 32 Insertion of CI Module... 34 Digital Audio Out Setup.. 35 Headphone Setup.. 35 Other A/V Source Setup.. 36 Usb Setup... 37 PC Setup.. 38 - Screen Setup for PC Mode..42
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions. 46 Turning on the TV.. 50 Programme Selection.. 50 Volume Adjustment... 50 Quick Menu... 51 On-Screen Menus Selection and Adjustment.. 52 Auto Programme Tuning.. 53 Manual Programme Tuning (In Digital Mode).. 55

TO USE A USB DEVICE

When connecting a USB device.. 82 Photo List... 83 Music List..87 Movie List...90 DivX Registration Code...94 Deactivation..95
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
Switch on/off EPG.. 96 Select a Programme.. 96 Button Function in NOW/NEXT Guide Mode. 96 Button Function in 8 Day Guide Mode.97 Button Function in Date Change Mode. 97 Button Function in Extended Description Box. 98 Button Function in Record/Remind Setting Mode. 98 Button Function in Schedule List Mode.. 98
I/II - Stereo/Dual Reception (In Analogue Mode Only) 123 - NICAM Reception (In Analogue Mode Only). 124 - Speaker Sound Output Selection. 124 On-Screen Menu Language/Country Selection. 125 Language Selection (In Digital Mode only). 126

TIME SETTING

Clock Setup... 127 Auto On/ Off Time Setting. 128 Sleep Timer Setting.. 129

PICTURE CONTROL

Picture Size (Aspect Ratio) Control.. 99 Picture Wizard..101 Energy Saving..102 Preset Picture Settings - Picture Mode-Preset.. 103 Manual Picture Adjustment - Picture Mode-User option.. 104 Picture Improvement Technology.. 105 Expert Picture Control.. 106 Picture Reset.. 109 Power Indicator..Image Sticking Minimization (ISM) Method. 1 Demo Mode... Mode Setting...1 13
PARENTAL CONTROL / RATINGS
Set Password & Lock System.. 130 Block Programme.. 131 Parental Control (In Digital Mode only). 132 External Input Blocking..133 Key Lock... 134

TELETEXT

Switch on/off.. 135 SIMPLE Text... 135 TOP Text... 135 FASTEXT... 136 Special Teletext Functions.. 136
SOUND & LANGUAGE CONTROL
Auto Volume Leveler.. Clear Voice II...Preset Sound Settings - Sound Mode.. Sound Setting Adjustment -User Mode.SRS TruSurround XT.. Balance... TV Speakers On/ Off Setup..DTV Audio setting (In Digital Mode only).Selecting Digital Audio Out..120 Audio Reset..121 Audio Description (In Digital Mode only).122

TV can receive video and audio signals simultaneously when using an HDMI cable. G If the DVD does not support Auto HDMI, you must set the output resolution appropriately. G Check that your HDMI cable is version 1.3 or higher. If the HDMI cables dont support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.

VCR SETUP

To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF Cable

ANT OUT S-VIDEO VIDEO

Wall Jack
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
Connect the antenna cable to the A N T I N socket of the VCR.
Press the P L A Y button on the VCR and match the appropriate channel between the TV and VCR for viewing.
Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select A V 1 input source using the I N P U T button on the remote control. If connected to A V 2 Euro scart socket, select A V 2 input source.
Any Euro Scart cable used must be signal shielded.
Connecting with a RCA cable
(Except for 19/22LU40**, 19/22LU50**, 19/22LH20**, 32/37/42LF25**)
V Connect the A U D I O/V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select A V 3 input source using the I N P U T button on the remote control.

S-VIDEO

If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the TV.
Connect the S-VIDEO output of the VCR to the S V I D E O input on the TV set. The picture quality is improved; compared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the A U D I O input jacks on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select A V 3 input source with using the I N P U T button on the remote control.

VOLUME UP Adjusts the volume. /DOWN MARK Check and un-check programmes in the USB menu. FAV Displays the selected favourite programme. MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the next UP/DOWN one. 0~9 number Selects a programme. button Selects numbered items in a menu. LIST Displays the programme table.(G p. 6 4) Q.VIEW Returns to the previously viewed programme. SIMPLINK / Controls SIMPLINK or USB menu(Photo List and Music USB Menu List or Movie List (Only 32/37/42/47LH49**, control buttons 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**)). FREEZE Pause the present picture at the screen.(Plasma TV only)

Installing Batteries

Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones. Close cover.
(Only 19/22LU40**, 19/22/26LU50**, 32/37/42LF25**, 32/37/42LG21**, 19/22/26/32/37/42LH20**, 32/37/42/47LH30**)
When using the remote control, aim it at the remote control sensor on the TV. TV/RAD Selects Radio, TV and DTV channel. AV MODE It helps you select and set images and sounds when connecting AV devices.(G p. 7 2)

AV MODE ENERGY SAVING

POWER Switches the TV on from standby or off to standby. INPUT External input mode rotate in regular sequence. (G p. 6 6) ENERGY SAVING Adjust the Energy Saving mode of the TV. (G p. 2)
0~9 number Selects a programme. button Selects numbered items in a menu. Q.VIEW Returns to the previously viewed programme.

LIST Q.VIEW

LIST Displays the programme table.(G p. 6 4) THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/Right) the system settings to your preference.
MENU Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(G p. 5 2) RETURN(EXIT) Allows the user to move return one step in an interactive application, EPG or other user interaction function.

RETURN / EXIT

Coloured These buttons are used for teletext (on T E L E T E X T buttons models only) , P r o g r a m m e e d i t.

Q.MENU INFO

GUIDE MARK FAV
VOLUME UP Adjusts the volume. /DOWN MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the next UP/DOWN one.

Hard of Hearing( Country Input Label SIMPLINK Key Lock Simple Manual Simple Manual

Select Simple Manual.

Select the part of the manual you want to see.
This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. O If you do not want SIMPLINK menu,select O f f.
: English : English : English ) : Off : UK Off : On On On : Off

Select S I M P L I N K.

Connecting to Home Theater with the SIMPLINK logo.
Connect the H D M I / D V I I N 1, H D M I I N 2(Except for , 19/22LH20**), H D M I I N 3 (Except for 19/22LU40**, 19/22LU50**, 19/22/26/32/37/42LH20**, 32/37/42LF25**, 32/37/42LG21**) or H D M I I N 4 (Only 32/37/42/47LH49**, 32/37/42/47LH50**, 32/37/42/47LH70**) terminal on the back of the TV and the HDMI output terminal of the Home Theater using HDMI cables. Connect the Digital Audio output terminal on the back of the TV and the Digital Audio input terminal of the Home Theater using optical cables. Select Home Theater in the Speaker menu by pushing the S I M P L I N K button.

Home Theater

When you select or operate a media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker).
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device controlled by SIMPLINK.

SIMPLINK Functions

Disc playback Control connected AV devices by pressing the , OK, G, A, l l, FF and GG buttons. Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it. Power off all devices When you switch off the TV, all connected devices are turned off. Switch audio-out Offers an easy way to switch audio-out. Sync Power on When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn on mode. * A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK, does not provide this function. Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics Control).

SIMPLINK Menu

Press the
button and then OK button to select the desired SIMPLINK source.
T V v i e w i n g : Switch to the previous TV programme regardless of the current mode. D I S C p l a y b a c k : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. V C R p l a y b a c k : Play and control the connected VCR. H D D R e c o r d i n g s p l a y b a c k : Play and control recordings stored in HDD. Audio Out to Home theater/Audio Out to TV: Select Home theater or TV speaker for Audio Out.
Selected Device When device is not connected (displayed in gray) When a device is connected (displayed in bright colour)

Change Device

Home theater: Only one supported at a time DVD, Recorder: Up to one(19/22LH20**), two(19/22LU40**, 19/22LU50**, 26/32/37/42LH20**, 32/37/42LF25**, 32/37/42LG21**), three(32/37/42/47LH30**,
VCR: Only one supported at a time
32/37/42/47LH40**, 26LU50**) or four(32/37/42/47LH49**, 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**) supported at a time.

AV MODE

You can select the optimal images and sounds when connecting AV devices to external input. Off Cinema Sport Game Disables the AV MODE. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games.

Cinema

1AV MODE 2
Press the AV MODE button repeatedly to select the desired source.
If you select C i n e m a in AV mode, C i n e m a will be selected both for
P i c t u r e M o d e and S o u n d M o d e in P I C T U R E menu and A U D I O menu respectively. O If you select O f f in AV mode, the picture and image which you initially set will be selected.
INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS)
This function initializes all settings. D a y and N i g h t of the P i c t u r e M o d e cannot be initialized. But the settings of It is useful to initialize the product or when you move to other city or country. When the Factory Reset is completed, you must restart the Initializing setup. O When the L o c k S y s t e m menu is "O n", the message to enter the password appears.
SIMPLINK Key Lock Simple Manual Set ID Power Indicator Demo Mode Mode Setting Factory Reset FactoryReset
SIMPLINK Key Lock Simple Manual Set ID
: On : Off :1 : On : Store Demo

: On : Off

:1 All user settings and channel settings will be reset. Still Power Indicator Demo Mode Continue? : On Mode Setting Factory Reset Factory Reset : Store Demo Yes No
Select O P T I O N. Select F a c t o r y R e s e t. Select Y e s.
O In L o c k S y s t e m "O n", if you forget your password, press '7', '7', '7', '7' on the remote control handset.

Select the desired music title
button to navigate up/down in the music page. Use M A R K button to mark or unmark a music. When one or more music files are marked, the marked music title will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence.
If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. The Screen Saver? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.
When a music file is played, is displayed behind the title. G A damaged or corrupted music does not play but displays 00:00 in playtime. G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. G If you press O K, A buttons, screen saver is stopped. G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode. G You can use the GG button to select the next music and the FF button to select the previous music.
TO USE A USB DEVICE MOVIE LIST(Only 32/37/42/47LH49**, 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**)
You can play movie files on a USB storage device. The movie list is activated once USB is detected. It is used when playing movie files on TV. Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. It is a movie list that displays folder information and movie file. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation. Movie(*.dat/*.mpg/*.mpeg/*.ts/*.trp/*.tp/*.vob/*.mp4/*.mkv/*.avi/*.divx) supporting file Video format :DivX3.1 DivX4.12, DivX5.x, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid 1.101, beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC Audio format : Dolby Digital, AAC, Mpeg, MP3, LPCM, HEAAC Bit rate : within 32 ~ 320kbps(MP3) Subtitle format : *.smi/*.srt/*.sub(MicroDVD, SubViewer1.0/2.0)/*.ass/*.ssa/*.txt(TMPlayer)/*.psb(PowerDivx) Some user-created subtitles may not work properly. Some special characters are not supported in subtitles. HTML tags are not supported in subtitles. Subtitles in languages other than the supported languages are not available. Time information in an external subtitle file should be arranged in ascending order to be played. The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed. A damaged movie file may not be played correctly, or some player functions may not be usable. Movie files produced with some encoders may not be played correctly. If the video and audio structure of recorded file is not interleaved, either video or audio is outputted. HD videos with a maximum of 1920x1080@25/30P or 1 280x720@50/60P are supported, depending on the frame. Videos with resolutions higher than 1920X1080@25/30P or 1280x720@50/60P may not work properly depending on the frame. Movie files other than the specified types and formats may not work properly. Max bitrate of playable movie file is 20Mbps. We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/AVC. DTS Audio codec is not supported. A movie file more than 30GB in file size is not supported for playback. A DivX movie file and its subtitle file must be located in the same folder. A video file name and its subtitle file name must be identical for it to be displayed. Playing a video via a USB connection that doesnt support high speed may not work properly. Files encoded with GMC(Global Motion Compensation) may not be played.

Using the Movie List function, play
Picture Size Audio Language Subtitle Language. Sync. Position

Full 1 Latin 0

Option

Subtitle Language Latin1

Support Language English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan,Valencian Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Hungarian Estonian, Latvian, Lithuanian Bulgarian, Macedonian, Russian, Ukrainian, Kazakh Greek Turkish
Latin2 Latin4 Cyrillic Greek Turkish
P i c t u r e S i z e : Selects your desired picture format during movie play. G Audio Language & Subtitle Language : Changes the Language Group of the audio/subtitle during movie play. G S y n c : Adjusts the time synchronisation of the subtitle from -10 secs ~ +10 secs by steps of 0.5 secs during movie play. G P o s i t i o n : Changes the position of the subtitle either up or down during movie play.
Only the files saved in ASCII CODE is supported for the external subtitles of the movie. G Only 250 Korean characters, 500 alphabets and 500 numbers are supported for each line of the subtitle. G Only 10,000 of sync blocks can be supported within the subtitle file.

Using the remote control

When playing,
repeatedly, press the R E W( FF) button to speed up FF(x2) -> FFF(x4) -> FFFF(x8) -> FFFFF(x16) ->FFFFFF(x32). repeatedly, press the F F( GG) button to speed up GG(x2)-> GGG(x4) -> GGGG(x8) -> GGGGG(x16) -> GGGGGG(x32).
Pressing these buttons repeatedly increases the fast forward/reverse speed.
During playback, press the P a u s e ( I I) button. Still screen is displayed. If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state. Press the P a u s e ( I I ) button and then use the F F ( GG ) button for slow motion.
When using the or button during playback a cursor indicating the position can be viewed on the screen.

P L A Y ( G)

Press the P L A Y( G) button to return to normal playback. Press the E N E R G Y S A V I N G button repeatedly to increase the brightness of your screen.(Refer to p. 102)
Press the A V M O D E button repeatedly to select the desired source.(Refer to p. 72)
TO USE A USB DEVICE DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.)

SIMPLINK Key Lock Simple Manual Set ID ISM Method ISM Method Demo Mode Mode Setting Factory Reset
SIMPLINK Key Lock Simple Manual Set ID ISM Method Demo Mode Mode Setting Factory Reset
: On : Off :1 : Normal : On : Store Demo
: On : Off :1 Normal ::Normal : On Normal
Orbiter : Store Demo Colour Wash White Wash
If you do not need this function, set N o r m a l.
Select I S M M e t h o d.
Select N o r m a l , O r b i t e r , C o l o u r W a s h or W h i t e W a s h.

DEMO MODE

Display the slide show to explain the various logo of this TV. It is not possible to use D e m o M o d e in H o m e U s e mode. In S t o r e D e m o, D e m o M o d e is automatically set to O n. Once D e m o M o d e is set to O f f in S t o r e D e m o, D e m o M o d e does not run and only the screen is reset. The screen is reset automatically after 5 minutes in D e m o M o d e.
SIMPLINK Key Lock Simple Manual Set ID Power Indicator Demo Mode Demo Mode Mode Setting Factory Reset
: On : Off :1 : On On : Store Demo
: On : Off :1 : On On Off : OnStore Demo On Off On(LED On) On(LED On) On(LED Off)

Select Demo Mode.

Select O n to show the various logo of TV.
Return to TV viewing. If you want to stop the demo, press any button. (except for + , - button) MUTE,

MODE SETTING

H We recommend setting the TV to H o m e U s e mode for the best picture in your home environment. S S t o r e D e m o mode is an optimal setting for displaying at stores.
SIMPLINK Key Lock Simple Manual Set ID Power Indicator Demo Mode Mode Setting Mode Setting Factory Reset
: On : Off :1 : On Store Demo ::Store Demo
: On : Off Selecting the environment. :1 Choose the setting mode you want. : On Store Demo :: Store Demo Store Demo Home Use
Select [Home Use] to use this TV at home. To use this TV at store, select [Store Demo].

Select Mode Setting.

Select Store Demo or Home Use.

AUTO VOLUME LEVELER

AVL automatically remains on the same level of volume if you change programmes. Because each broadcasting station has its own signal conditions, volume adjustment may be needed every time the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program. If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amp to cope with different user environments.
Auto Volume Clear Voice II Balance Sound Mode : Standard SRS TruSurround XT : Off Treble Bass
Auto Volume Clear Voice II : :Off Off : Off Level Balance Sound Mode : Standard
::Off Off : Off Level 3 0

Off Off On 3 0

Select A U D I O.
Select A u t o V o l u m e.

CLEAR VOICE II

By differentiating the human sound range from others, it helps users listen to human voices better.

TROUBLESHOOTING

The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Install new batteries.
The remote control does not work
Power is suddenly turned off
Is the sleep timer set? A Check the power control settings. Has the Power supply been interrupted. A If the TV is switched on and there is no input signal, it will switch off automatically after 15 minutes.
The video function does not work. Check whether the TV is switched on. A Try another channel. The problem may be with the broadcast. A Is the power cord inserted correctly into the mains? A Check your antenna direction and/or location. A Test the mains outlet by plugging another TV into the same outlet.
No picture & No sound
Picture appears slowly after switching on
This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.
No or poor colour or poor picture
Adjust Colour in menu option. A Allow a sufficient distance between the TV and the VCR. A Try another channel. The problem may be with the broadcast. A Are the video cables installed properly? A Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures No picture when connecting HDMI
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station. Station signal is weak, reposition the antenna to receive weaker stations. A Check for sources of possible interference.
Check antenna (Change the position of the antenna). Check that your HDMI cable is version 1.3 or higher. If the HDMI cables dont support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.
The audio function does not work.
Picture OK & No sound
+ or - button. Press the Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? Adjust B a l a n c e in menu option. A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV. Check HDMI cable over version 1.3. Check USB cable over version 2.0.

42LH50** 42LH5000-ZB 42LH5010-ZD 42LH5020-ZE
47LH50** 47LH5000-ZB 47LH5010-ZD 47LH5020-ZE
1 73.4 x 791.4x 319.0mm 1 46.2x 31.2 x 1 inches 2.73.4x 723.4x 100.8mm 1 46.2x 28.5 x 4.0 inches 23.6 kg / 52.0 lbs 20.8 kg / 45.9 lbs AC100-240V~ 50/60Hz 260W
1052.2 x 719.1 x 296.2mm 1052.2 x 720.1 x 270.6mm 1 73.4 x 789.7x 337 1.4mm 41.5x 28.3 x 1 inches 1.7 41.5x 28.4 x 10.7 inches 46.2x 31.1 x 1 inches 3.3 1052.2 x 657.3 x 90.8mm 41.5 x 25.9 x 3.6 inches 19.0 kg / 41.9 lbs 17.2 kg / 37.9 lbs AC100-240V~ 50/60Hz 210W 1052.2 x 657.3 x 90.8mm 41.5 x 25.9 x 3.6 inches 19.0 kg / 41.9 lbs 17.2 kg / 37.9 lbs AC100-240V~ 50/60Hz 210W 1 73.4x 723.4x 100.8mm 1 46.2x 28.5 x 4.0 inches 23.4 kg / 51.6 lbs 20.8 kg / 45.9 lbs AC100-240V~ 50/60Hz 260W
100.0 x 55.0 x 5.0mm 3.94 x 2.17 x 0.20inches Operating Temperature 0 ~ 40C / 32 ~ 104F Less than 80% -20 ~ 60C / -4 ~ 140F Less than 85% Refer to p.90
Operating Humidity Storage Temperature Storage Humidity

Supported movie files

19LU50** MODELS with stand without stand 19LU5000-ZA 19U5010-ZB 19LU5020-ZC
462.0 x 373.0 x 1 82.0 mm 1 x 1 x 7 inches 8.2 4.7.2 462.0 x 305.0 x 65.0 mm 1 x 1 x 2.6 inches 8.2 2.0 4.4 kg / 9.7 lbs 3.7 kg / 8.2 lbs AC100-240V~ 50/60Hz 40W
22LU50** 22LU5000-ZA 22U5010-ZB 22LU5020-ZC
529.1 x 41 x 196.0 mm 6.6 20.9 x 1 x 7 inches 6.4.7 529.1 x 342.3 x 65.0 mm 20.9 x 1 x 2.6 inches 3.5 5.4 kg / 1 lbs 1.9 4.6 kg / 10.2 lbs AC100-240V~ 50/60Hz 55W
26LU50** 26LU5000-ZA 26U5010-ZB 26LU5020-ZC
668.0 x 538.3 x 236 mm 26.3 x 21.2 x 9.3 inches 668.0 x 456.0 x 81.0 mm 26.3 x 1 x 3.2 inches 8.0 8.9 kg / 19.6 lbs 7 kg / 1.0 lbs.AC100-240V~ 50/60Hz 1 0W 1

Dimensions

19LU40** 19LU4000-ZB 19LU4010-ZC

22LU40** 22LU4000-ZB

542.9 x 429.3 x 196.0mm 21.4 x 1 x 7 inches 6.9.7 542.9 x 397 x 65.0 mm.8 21.4 x 1 x 2.6 inches 5.7 5.5 kg / 1 lbs 2.1 5.0 kg /1 lbs 1.0 AC100-240V~ 50/60Hz 55W

22LU4010-ZC

474.0 x 390.0 x 1 82.0 mm 474.0 x 390.0 x 1 82.0 mm 1 x 1 x 7 inches 8.7 5.4.x 1 x 7 inches 8.7 5.4.2 474.0 x 357 x 65.0 mm.x 1 x 2.6 inches 8.7 4.1 4.4 kg / 9.7 lbs 3.9 kg / 8.6 lbs AC100-240V~ 50/60Hz 40W 474.0 x 357 x 65.0 mm.x 1 x 2.6 inches 8.7 4.1 4.4 kg / 9.7 lbs 3.9 kg / 8.6 lbs AC100-240V~ 50/60Hz 40W

EXTERNAL CONTROL DEVICE SETUP

RS-232C Setup

Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the products functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
Type of Connector; D-Sub 9-Pin Male
No. 9 Pin Name No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable) PC RXD TXD GND DTR DSR RTS CTS 8 D-Sub 9 TV 7 D-Sub 9 TXD RXD GND DSR DTR CTS RTS RXD TXD GND DTR DSR RTS CTS 3-Wire Configurations(Not standard) PC 8 D-Sub 9 TV 8 D-Sub 9 TXD RXD GND DTR DSR RTS CTS

Set ID

Use this function to specify a set ID number. Refer to Real Data Mapping. G p.157
SIMPLINK Key Lock Simple Manual Set ID Set ID Power Indicator Demo Mode Mode Setting Factory Reset
: On : Off ::: On : Store Demo

: On : Off ::: On

: Store Demo
Select S e t I D. Adjust Set ID to choose the desired TV ID number. The adjustment range of SET ID is 1~99.
Press R E T U R N to move to the previous menu screen.

Communication Parameters

Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None
Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable.
Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. * : You can adjust the set ID to choose * [Set ID] desired monitor ID number in option menu. Adjustment range is 1 ~ 99. When selecting Set ID 0, every connected set is controlled. Set ID is indicated as decimal (1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol. : To transmit command data. * [DATA] Transmit FF data to read status of command. [Cr] : Carriage Return * ASCII code 0x0D : ASCII code space (0x20) * [ ]

Command Reference List

COMMAND COMMAND DATA (Hexadecimal) 01. Power 02. Aspect Ratio 03. Screen Mute 04. Volume Mute 05. Volume Control 06. Contrast 07 Brightness. 08. Colour 09. Tint 10. Sharpness 1 OSD Select 1. 1 Remote control lock mode 2. 1 Treble 3. 1 Bass 4. 1 Balance 5. 1 Colour Temperature 6. 1. ISM Method Energy Saving 8. 19. Auto Configuration 20. Tune Command 21. Programme Add/Skip 22. Key 23. Control Back Light 24. Input select (Main) k k k k k k k k k k k k k k k k j j j m m m m x a c d e f g h i j k l m r s t u p q u a b c g b 00 ~ 01 Refer to p. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 02 Refer to p. ~ Refer to p. ~ 01 Key C ode 00 ~ 64 Refer to p. 158

3.4. Intellectual Property Matters (a) Third Party Claims. If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has been obtained.
(b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License. 3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer. 3.6. Distribution of Executable Versions. You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients' rights relating to the Covered Code. You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms different from this License, provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from the rights set forth in this License. If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any such terms You offer. 3.7. Larger Works. You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License are fulfilled for the Covered Code. 4. Inability to Comply Due to Statute or Regulation. If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it. 5. Application of this License. This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code. 6. Versions of the License.