LG 37LH50 Television

37" Full HD 1080p 200Hz True Motion LCD TV
Full HD 1080p performance, a robust feature set, and energy savings make this series of LCD TVs a standout. The LH50 features a 200Hz True Motion IPS panel, Intelligent Sensor, and LGs Core Technologieswhile letting you choose the features to perfectly fit your needs, like 3x or 4x HDMI, a range of screen sizes, and a USB port

Full HD 1080p

LG Full HD TV excels the picture quality and sharpness of the original HD TV technology, delivering image resolution (1920x1080).

24p Real Cinema

Movies are played fluidly without judder. The Real Cinema experience awaits. If youre a movie buff that watches movies on your TV, surely youve experienced the judder that spoils the movie theater mood while watching. Because films that are played at 24 frames per second are converted to play at 50 frames per second on regular TVs. LG 24p Real Cinema function matches the original frame rate of the film with no judder.

Picture Wizard

The picture quality adjust system developed by the foremost experts in picture quality.

Invisible Speaker

Great sound is meant to be heard, not seen! Our Invisible Speakers beautifully hidden are designed with simplicity.

True Motion 240Hz

Dramatically reduces motion blur, even in fast moving images

Key Features

PDF created with pdfFactory Pro trial version www.pdffactory.com
Full HD 1080p, Invisible Speaker, 24p Real Cinema, Clear Voice II, True Motion 240Hz, Picture Wizard, AV Mode

Common Spec

Display Type LCD TV Screen Size ( Inch ) 37

Broadcasting System

PAL NoB/G, D/K, I SECAMNoB/G, D/K, I

PICTURE

Resolution: 1920x1080 Brightness ( ) 500 Dynamic Contrast Ratio 150,000:1 Viewing Angle Degree 178/178 Colors Reproduction(R,G,B) 10bit Response Time (MPRT) 2.0ms WCC (Wide Color Control) Life Span (hr) 60,000h
Dual XD Engine : 7 Modes (16:9/JustScan/Original /4:3/14:9/Zoom/CinemaZoom) Aspect Ratio Correction Just Scan (0% overscan) Film Mode (3:2 Pull down) Fresh White AV Mode II (Cinema/Game/Sport)
Audio Output 10W+10W Speaker System 2 Way 4 Speakers Surround System: Dolby Digital Decoder SRS Trussuround Clear Voice II Smart Volume Leveler

FEATURE

Smart Energy Saving Plus True Motion 1080P Source Input: HDMI 60p/30p,50p/24p Component 60p/30p,50p/24p RGB 1920x1080(60p) AV Input Navigation SIMPLINK (HDMI CEC) Swivel ()+20 / 20 MP3/JEPG MPEG 2/4 Subtitle for DivX (HD/SD) USB 2.0 MP3/JEPG, MPEG 2/4, Subtitile for DivX(HD/SD)

INTERFACE

AV In HDMI/HDCP Input USB 2.0 RF In AV In AV Out RGB In (Dsub 15pin) Component in (Y,Pb,Pr) + Audio HDMI/HDCP Input PC Audio Input RS232C (Control / SVC)
Voltage, Hz 100 ~ 240V 50/60Hz Standby (Stand by mode) 1W

4 inches

CAREFUL INSTALLATION ADVICE
You should purchase necessary components to fix the TV safety and secure to the wall on the market. A Position the TV close to the wall to avoid the possibility of it falling when pushed. A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

SWIVEL STAND

Image shown may differ from your TV. After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
(Except for 19/22LH20**, 19/22LU40**, 19/22/26LU50**)
TO USE THE STAND REAR COVER (Only 37/42/47LH70**)
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
Image shown may differ from your TV. Install the S T A N D R E A R C O V E R as shown.

STAND REAR COVER

Grip the knob in your fingers and pull it. Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
When moving the TV undo the cords first. Use a platform or cabinet strong and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
LCD TV Models : 32/37/42LF25**, 32/37/42LG21**, 26/32/37/42LH20**, 32/37/42/47LH30**, 32/37/42/47LH40**, 32/37/42/47LH49**, 32/37/42/47LH50**
Install the CABLE MANAGEMENT CLIP as shown.

CABLE MANAGEMENT CLIP

Open the CABLE MANAGEMENT CLIP as shown.
Fit the CABLE MANAGEMENT CLIP as shown.
Fit the C A B L E M A N A G E M E N T C L I P as shown.
How to remove the cable management clip (LCD TV Models : 19/22LH20**)
Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward.
After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.
not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.
Align the hole with the tab on the C A B L E M A N A G E M E N T C L I P. Turn the C A B L E M A N A G E M E N T C L I P as shown. Note : that excessive force might cause damage to the product when using Cable Management clip.

After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section.

CABLE HOLDER

Install the C A B L E M A N A G E M E N T C L I P as shown.
Connect the cables as necessary. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section.
How to remove the cable management clip How to secure the power cable

(Only 32/37/42/47LH70**)

Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.
Secure the power cable with the PROTECTIVE BRACKET and the bolt as shown. It will help prevent the power cable from being removed by accident.

PROTECTIVE BRACKET

Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.
NOT USING THE DESK-TYPE STAND
(Except for 19/22LU40**, 19/22/26LU50**)
Image shown may differ from your TV. When installing the wall-mounted unit, use the protection cover.
Plasma TV models PREPARATION

PROTECTION COVER

Insert the P R O T E C T I O N C O V E R into the TV until clicking sound.

Loose the bolts from TV.

Detach the stand from TV.
After removing the protection paper from the protection cover, adhere it to the TV as shown. Only 26/32/37/42LH20**, 32/37/42/47LH30**, 32/37/42/47LH40**, 32/37/42/47LH49**, 32/37/42/47LH50** Insert the P r o t e c t i o n C o v e r into the TV.
Only 32/37/42LF25**, 32/37/42LG21**
A The TV can be installed in various ways such as on a wall, or on a desktop etc. A The TV is designed to be mounted horizontally.
4 inches 4 inches 4 inches 4 inches

EARTHING

Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit breaker
WALL MOUNT: HORIZONTAL INSTALLATION
We recommend the use of a LG Brand wall mounting bracket when mounting the TV to a wall. A We recommend that you purchase a wall mounting bracket which supports VESA standard. A LG recommends that wall mounting be performed by a qualified professional installer. A First you connect the USB extension cable to the USB IN terminal, and then hang it on the wall. (Only 32/37/42/47LH70**) Should Install wall mount on a solid wall perpendicular to the floor. G Should use a special wall mount, if you want to install it to ceiling or slanted wall. G The surface that wall mount is to be mounted on should be of sufficient strength to support the weight of TV set; e.g. concrete, natural rock, brick and hollow block. G Installing screw type and length depends on the wall mount used. Further information, refer to the instructions included with the mount. G LG is not liable for any accidents or damage to property or TV due to incorrect installation: - Where a non-compliant VESA wall mount is used. - Incorrect fastening of screws to surface which may cause TV to fall and cause personal injury. - Not following the recommended Installation method.

SIMPLINK Key Lock Simple Manual Set ID Power Indicator Demo Mode Mode Setting Factory Reset FactoryReset
SIMPLINK Key Lock Simple Manual Set ID
: On : Off :1 : On : Store Demo

: On : Off

:1 All user settings and channel settings will be reset. Still Power Indicator Demo Mode Continue? : On Mode Setting Factory Reset Factory Reset : Store Demo Yes No
Select O P T I O N. Select F a c t o r y R e s e t. Select Y e s.
O In L o c k S y s t e m "O n", if you forget your password, press '7', '7', '7', '7' on the remote control handset.

Start Factory Reset.

TO USE THE BLUETOOTH (Only 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**)
Bluetooth is a short distance networking technology using 2.4 GHz frequency to connect various types of information devices such as computers, cell phones and PDAs, as well as digital appliances through wireless connection, without having to connect any cable, to enable data exchange. With the Bluetooth communication function, you can connect the Bluetooth enabled wireless headset or receive images(only JPEG), listen to music from the Bluetooth enabled cell phone using this TV.
Communication Spec.: Bluetooth Specification Version 2.0 + EDR (Enhanced Data Rate) Output: Bluetooth Specification Power Class 2 Maximum Communication Range: Line of open sight approx. 10 m (30 ft) Frequency Band: 2.4 GHz band (2.4 GHz ~ 2.4835 GHz) Bluetooth Module: EAX57538201 (LG Electronics) Compatible Bluetooth Profile : GAVDP(Generic Audio/Video Distribution Profile) A2DP(Advanced Audio Distribution Profile) HSP(Headset Profile) OPP(Object Push Profile) BIP(Basic Imaging Profile) FTP(File Transfer Profile)

Bluetooth?

TO USE THE BLUETOOTH
Precautions when using the Bluetooth
Use within 10m(-45~ 45) range. If you use the device out of the range or within the range with obstacles, it can result in communication error. G Communication error can occur depending on the surrounding devices. G Products using the same frequency of 2.4 GHz (Wireless LAN, microwave oven etc.), can cause communication error by using the same frequency bandwidth. G The device search time differs depending on the number of Bluetooth devices and the operating situation. G The probability of search increases with less number of devices. G Electromagnetic wave can be interfered with applicable wireless devices. G Because applicable wireless devices have the possibility of electromagnetic wave interference, they cannot provide services related to human life. G You can only connect one Bluetooth device at a time. G You cannot receive photos(only JPEG) or listen to music from other Bluetooth devices while using the Bluetooth headset. For details of Bluetooth, refer to the user manual of the Bluetooth device. G G USB (Photo List, Music List, Movie List(Only 32/37/42/47LH49**, 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**)) and Bluetooth will not be supported at the same time. G Operation is subject to the following two conditions : (1) This device may not cause (harmful) interference, and (2) this device must accept any interference received, including interference that may cause undesired operation (of the device).

QDID(Qualified Design Identity) : B014836

SETTING THE BLUETOOTH

If you want to listen to the broadcasted sound using the Bluetooth headset or receive the jpeg images from an external device and view them on the TV, listen to music from cell phone(Bluetooth device), you can use the wireless communication without having to connect any cables. O You can use the BLUETOOTH menu by selecting O n. O If you do not want to use the Bluetooth function, select O f f. If it is connected to the external Bluetooth device, you can select Off after disconnecting the device.
Bluetooth Bluetooth TV PIN
: Off Off :Off On :On 0000
Bluetooth Headset : Disconnected Registered Bluetooth Device My Bluetooth Info.
Select B L U E T O O T H.
Select B l u e t o o t h.

SET TV PIN

To accept connection from an external Bluetooth device or to connect to an external Bluetooth device, the PIN needs to be entered. For details on how to set the PIN of the external Bluetooth device, refer to the user manual of the applicable device. The TV PIN is composed of numbers of up to 10 digits. The TV PIN must have more than 1 digit.

Bluetooth TV PIN TV PIN

: Off 0000 :: 0000

Set TV PIN 0 0_

Delete
Press the button to delete digits one by one.

Select T V P I N.

Select the desired PIN number.

BLUETOOTH HEADSET

When you select the Bluetooth headset, you can listen to the TV sound in the Bluetooth headset through wireless communication. You must pair it with any new Bluetooth device before the first use. For details, refer to the user manual of the applicable device. A maximum of 1 devices can be paired. 2 When the unit is searching for the Bluetooth headset, other buttons except for the Stop (OK button) do not work.
Connecting a new Bluetooth headset
You can only search for the new Bluetooth headset only in the D i s c o n n e c t e d condition. When you run the search, it will show you the list of all Bluetooth headsets responding. After new Bluetooth device is searched, the PIN number is validated to connect the device. For details, refer to the user manual of the applicable device. When selecting Cable (DVB cable mode) if Finland or Sweden is chosen in LCD TV Models, you cannot hear stereo sound through the Bluetooth headset. *When selecting Cable (DVB cable mode) if Finland or Sweden is chosen in LCD TV Models 1. A Bluetooth headset is disconnected if there is any. 2. All headset device lists are deleted. 3. Bluetooth mode is turned off. 4. When trying to connect with a stereo-only headset, Invalid format will be displayed.

When you connect a USB device, this pop up menu is displayed, automatically. POP UP MENU will not be displayed while the OSD including Menu, EPG or Schedule list is activated or while the Bluetooth Headset is connected. When the Pop Up menu does not appear, you can select Music List, Photo List or Movie List(Only 32/37/42/47LH49**, 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**) in the USB menu. In USB device, you can not add a new folder or delete the existing folder.
When connecting a USB device
1 Connect the USB device to the U S B

on the TV.

I N jack
Only photo(JPEG), music (MP3) and movie(DAT, MPG, MPEG, VOB, AVI, DIVX, MP4, MKV, TS, TRP TP)(Only 32/37/42/47LH49**, , 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**) are supported.

USB memory stick

When removing the USB device
Select the USB Device menu before removing the USB device.
Select P H O T O L I S T, M U S I C L I S T or M O V I E L I S T(Only 32/37/42/47LH49**, 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**).
PHOTO LIST MUSIC LIST MOVIE LIST

1Q. MENU 2

Select Eject.
G Only a USB storage device is recognizable. G If the USB storage device is connected through a USB hub, the device is not recognizable. G A USB storage device using an automatic recognition programme may not be recognized. G A USB storage device which uses its own driver may not be recognized. G The recognition speed of a USB storage device may depend on each device. G Please do not turn off the TV or unplug the USB device when the connected USB storage device is
Precautions when using the USB device
working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files, image files or movie files. G Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized. G Please connect power to a USB storage device(over 0.5A) which requires an external power supply. If not, the device may not be recognized. G Please connect a USB storage device with the cable offered by the device maker. G Some USB storage devices may not be supported or operated smoothly. G File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English characters. G Be sure to back up important files since data stored in a USB memory device may be damaged. We will not be responsible for any data loss. G If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. - Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source. G Data in a USB storage device cannot be deleted in the NTFS file system. G If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices. G Only the FAT32 file system supports the delete function. G If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected. G If the USB memory device does not work properly, disconnect and reconnect it. G How fast a USB memory device is detected differs from device to device. G If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on. G The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB memory. G Any device with more than the recommended capacity may not work properly. G If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on again to make it work properly. G USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list.

SIMPLINK Key Lock Simple Manual Set ID Power Indicator Demo Mode Mode Setting Factory Reset :1 : On : Store Demo
SIMPLINK Key Lock Simple Manual Set ID Power Indicator Demo Mode Mode Setting Factory Reset
: On : Off :1 Startup Sound : On Standby Light : Store Demo Power Light Close

Medium On On

Select P o w e r I n d i c a t o r.
Select S t a r t u p S o u n d(Only 32/37/42/47LH70**), S t a n d b y L i g h t or P o w e r L i g h t. Select your desired Source.
IMAGE STICKING MINIMIZATION (ISM) METHOD (PLASMA TV ONLY)
A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. White Wash White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Colour Wash The colour block with the screen moved a little and the white pattern are alternately displayed. It is difficult to sense the afterimage occurred while the temporary afterimage is removed and the colour pattern is operating.
SIMPLINK Key Lock Simple Manual Set ID ISM Method ISM Method Demo Mode Mode Setting Factory Reset
SIMPLINK Key Lock Simple Manual Set ID ISM Method Demo Mode Mode Setting Factory Reset
: On : Off :1 : Normal : On : Store Demo
: On : Off :1 Normal ::Normal : On Normal
Orbiter : Store Demo Colour Wash White Wash
If you do not need this function, set N o r m a l.
Select I S M M e t h o d.
Select N o r m a l , O r b i t e r , C o l o u r W a s h or W h i t e W a s h.

DEMO MODE

Display the slide show to explain the various logo of this TV. It is not possible to use D e m o M o d e in H o m e U s e mode. In S t o r e D e m o, D e m o M o d e is automatically set to O n. Once D e m o M o d e is set to O f f in S t o r e D e m o, D e m o M o d e does not run and only the screen is reset. The screen is reset automatically after 5 minutes in D e m o M o d e.
SIMPLINK Key Lock Simple Manual Set ID Power Indicator Demo Mode Demo Mode Mode Setting Factory Reset
: On : Off :1 : On On : Store Demo
: On : Off :1 : On On Off : OnStore Demo On Off On(LED On) On(LED On) On(LED Off)

Lock System Set Password Block Programme Parental Guidance Parental Guidance Input Block
Lock System Set Password Block Programme
Blocking Off :: Blocking Off

Blocking Off

Select P a r e n t a l G u i d a n c e.
Blocking Off : Permits all Move OK programmes : Off 10 and above 11 and above 12 and above Blocking Off :: Blocking Off 13 and above 14 and above 15 and above 16 and above 17 and above 18 and above

EXTERNAL INPUT BLOCKING

Enables you to block an input.
Off Off Off Off Off Off Off Off Off
Lock System Set Password Block Programme Parental Guidance Input Block Input Block

AV3 : Off Component RGB

Parental Guidance HDMI1 : Blocking Off Input Block HDMI2 HDMI3 HDMI4
(Except for 19/22LU40**, 19/22LU50**, 19/22/26/32/37/42LH20**, 32/37/42LF25**, 32/37/42LG21**)
Select I n p u t B l o c k.

Select input source.

KEY LOCK
The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing.
Menu Language Audio Language Subtitle Language Hard of Hearing( Country Input Label SIMPLINK Key Lock Key Lock
: English : English : English : UK : On : Off ) : Off
: English : English : English : UK : On Off : Off : Off On On ) : Off
O In K e y L o c k O n, if the TV is turned off, press the r / I,

Select K e y L o c k.

Select O n or O f f. Save.
) button on the TV or POWER INPUT, P D or E(or P INPUT, P or NUMBER buttons on the remote control then the set will be turned on. Key Lock On With the K e y L o c k O n, the display appears on the screen if any button on the front panel is pressed while viewing the TV. (Except for r / I button : Plasma TV only)
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.

50PS80** 50PS8000-ZA

1228.8 x 835.8 x 309 mm 48.4 x 32.9x 12.2inches 1228.8x 795.1 x 78.9 mm 48.4 x 31.3 x 3.1 inches 38.3 kg / 84.4 lbs 34.3kg / 75.6 lbs AC100-240V~ 50/60Hz 490W

60PS80** 60PS8000-ZA

1465.4x 986.4 x 371 mm 57.7 x 38.9 x 14.6 inches 1465.4 x 926.7 x 82.1 mm 57.7 x 36.5 x 3.2 inches 53.6kg / 118.2 lbs 46.6kg / 102.8 lbs AC100-240V~ 50/60Hz 580W
Digital TV Television System Program Coverage External Antenna Impedance DVB-T DVB-C (Sweden, Finland only) VHF, UHF 75
Analogue TV PAL/SECAM B/G/D/K, PAL I/II,
SECAM L/L VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S

IR CODES

1. How to Connect
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes

Output waveform

Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency FCAR = 1/Tc = fOSC/12 Duty ratio = T1/Tc = 1/3

Configuration of frame

1st frame
Lead code Low custom code High custom code Data code Data code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Repeat frame

Repeat code

Lead code

4.5 ms

0.55 ms

2.25 ms

Bit description Bit 0

0.56 ms 1.12 ms

0.56 ms 2.24 ms

Frame interval: Tf The waveform is transmitted as long as a key is depressed.

Tf Tf Tf=108ms @455KHz

Code (Hexa) 0B 79 F43 AB AA 03 1E 01 10~1A 39 7E 65
Function Energy Saving POWER INPUT RATIO TV/RAD Q.MENU MENU GUIDE Up ( ) Down ( ) Left ( ) Right ( ) OK( ) RETURN/EXIT INFO i AV MODE + FAV ( MARK ) MUTE P P Number Key 0~9 LIST Q.VIEW RED Key GREEN Key YELLOW Key BLUE Key TEXT T.OPT(T.Option) SUBTITLE SIMPLINK FREEZE(Plasma TV only)
Note R/C BUTTON R/C BUTTON(POWER ON/OFF) R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON
EXTERNAL CONTROL DEVICE SETUP

RS-232C Setup

Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the products functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
Type of Connector; D-Sub 9-Pin Male
No. 9 Pin Name No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable) PC RXD TXD GND DTR DSR RTS CTS 8 D-Sub 9 TV 7 D-Sub 9 TXD RXD GND DSR DTR CTS RTS RXD TXD GND DTR DSR RTS CTS 3-Wire Configurations(Not standard) PC 8 D-Sub 9 TV 8 D-Sub 9 TXD RXD GND DTR DSR RTS CTS

Set ID

Use this function to specify a set ID number. Refer to Real Data Mapping. G p.157
SIMPLINK Key Lock Simple Manual Set ID Set ID Power Indicator Demo Mode Mode Setting Factory Reset
: On : Off ::: On : Store Demo

: On : Off ::: On

: Store Demo
Select S e t I D. Adjust Set ID to choose the desired TV ID number. The adjustment range of SET ID is 1~99.
Press R E T U R N to move to the previous menu screen.

Communication Parameters

Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None
Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable.
Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. * : You can adjust the set ID to choose * [Set ID] desired monitor ID number in option menu. Adjustment range is 1 ~ 99. When selecting Set ID 0, every connected set is controlled. Set ID is indicated as decimal (1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol. : To transmit command data. * [DATA] Transmit FF data to read status of command. [Cr] : Carriage Return * ASCII code 0x0D : ASCII code space (0x20) * [ ]

Command Reference List

COMMAND COMMAND DATA (Hexadecimal) 01. Power 02. Aspect Ratio 03. Screen Mute 04. Volume Mute 05. Volume Control 06. Contrast 07 Brightness. 08. Colour 09. Tint 10. Sharpness 1 OSD Select 1. 1 Remote control lock mode 2. 1 Treble 3. 1 Bass 4. 1 Balance 5. 1 Colour Temperature 6. 1. ISM Method Energy Saving 8. 19. Auto Configuration 20. Tune Command 21. Programme Add/Skip 22. Key 23. Control Back Light 24. Input select (Main) k k k k k k k k k k k k k k k k j j j m m m m x a c d e f g h i j k l m r s t u p q u a b c g b 00 ~ 01 Refer to p. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ 02 Refer to p. ~ Refer to p. ~ 01 Key C ode 00 ~ 64 Refer to p. 158

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.
* When setting the 17 ~ 24, a menu does not appear on screen. * Note : During USB operations such as Dvix or EMF, all com- Data 00: Illegal Code mands except Power(ka) and Key(mc) are not executed and treated as NG.

G To select screen mute on/off.
[k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) Video mute off 01 : Screen mute on (Picture off) 10 : Video mute on
You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1. See page 157 Ack [i][ ][Set ID][ ][OK/NG][Data][x]
[d][ ][Set ID][ ][OK/NG][Data][x] * In case of video mute on only, TV will display On Screen Display(OSD). But, in case of Screen mute on, TV will not display OSD.
0 9. T i n t (C o m m a n d : k j )
G To adjust the screen tint.
13. Treble (Command: k r)

G To adjust treble.

You can also adjust tint in the PICTURE menu.
[k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 ~ Green : 64. * Refer to Real data mapping 1. See page 157 Ack [j][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust treble in the AUDIO menu. Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1 See page 157
[r][ ][Set ID][ ][OK/NG][Data][x]

1 4. Bass (Command: k s)

1 0. S h a r p n e s s (C o m m a n d : k k ) G To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1 See page 157 Ack [k][ ][Set ID][ ][OK/NG][Data][x]

G To adjust bass.

You can also adjust bass in the AUDIO menu. Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1 See page 157
[s][ ][Set ID][ ][OK/NG][Data][x] 1 5. B a l a n c e (C o m m a n d : k t )
1 1. O S D S e l e c t (C o m m a n d : k l ) G To select OSD (On Screen Display) on/off when controlling remotely.

G To adjust balance.

You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1. See page 157 Ack [t][ ][Set ID][ ][OK/NG][Data][x]

Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.

Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library. 4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code. 5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a "work that uses the Library". Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a "work that uses the Library" with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a "work that uses the library". The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a "work that uses the Library" uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself. 6. As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable "work that uses the Library", as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.) b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the user's computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.

6.1. New Versions. Netscape Communications Corporation ("Netscape") may publish revised and/or new versions of the License from time to time. Each version will be given a distinguishing version number. 6.2. Effect of New Versions. Once Covered Code has been published under a particular version of the License, You may always continue to use it under the terms of that version. You may also choose to use such Covered Code under the terms of any subsequent version of the License published by Netscape. No one other than Netscape has the right to modify the terms applicable to Covered Code created under this License.
6.3. Derivative Works. If You create or use a modified version of this License (which you may only do in order to apply it to code which is not already Covered Code governed by this License), You must (a) rename Your license so that the phrases "Mozilla", "MOZILLAPL", "MOZPL", "Netscape", "MPL", "NPL" or any confusingly similar phrase do not appear in your license (except to note that your license differs from this License) and (b) otherwise make it clear that Your version of the license contains terms which differ from the Mozilla Public License and Netscape Public License. (Filling in the name of the Initial Developer, Original Code or Contributor in the notice described in Exhibit A shall not of themselves be deemed to be modifications of this License.) 7. DISCLAIMER OF WARRANTY. COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS, MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU (NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR) ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS DISCLAIMER. 8. TERMINATION. 8.1. This License and the rights granted hereunder will terminate automatically if You fail to comply with terms herein and fail to cure such breach within 30 days of becoming aware of the breach. All sublicenses to the Covered Code which are properly granted shall survive any termination of this License. Provisions which, by their nature, must remain in effect beyond the termination of this License shall survive. 8.2. If You initiate litigation by asserting a patent infringement claim (excluding declatory judgment actions) against Initial Developer or a Contributor (the Initial Developer or Contributor against whom You file such action is referred to as "Participant") alleging that: (a) such Participant's Contributor Version directly or indirectly infringes any patent, then any and all rights granted by such Participant to You under Sections 2.1 and/or 2.2 of this License shall, upon 60 days notice from Participant terminate prospectively, unless if within 60 days after receipt of notice You either: (i) agree in writing to pay Participant a mutually agreeable reasonable royalty for Your past and future use of Modifications made by such Participant, or (ii) withdraw Your litigation claim with respect to the Contributor Version against such Participant. If within 60 days of notice, a reasonable royalty and payment arrangement are not mutually agreed upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under Sections 2.1 and/or 2.2 automatically terminate at the expiration of the 60 day notice period specified above. (b) any software, hardware, or device, other than such Participant's Contributor Version, directly or indirectly infringes any patent, then any rights granted to You by such Participant under Sections 2.1(b) and 2.2(b) are revoked effective as of the date You first made, used, sold, distributed, or had made, Modifications made by that Participant. 8.3. If You assert a patent infringement claim against Participant alleging that such Participant's Contributor Version directly or indirectly infringes any patent where such claim is resolved (such as by license or settlement) prior to the initiation of patent infringement litigation, then the reasonable value of the licenses granted by such Participant under Sections 2.1 or 2.2 shall be taken into account in determining the amount or value of any payment or license. 8.4. In the event of termination under Sections 8.1 or 8.2 above, all end user license agreements (excluding distributors and resellers) which have been validly granted by You or any distributor hereunder prior to termination shall survive termination. 9. LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR OTHERWISE, SHALL YOU, THE INITIAL DEVELOPER, ANY OTHER CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE,OR ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO ANY PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.