PICTURE

Advanced Picture Reset OPTIONO Demo SCREENO D V RO

AUDIOO

*: This feature is not available in all countries.
SETUPO Clock PICTUREO Off Time AUDIOO On Time Auto Sleep TIME G Time Zone OPTIONO SCREENO D V RO
SETUPO TimeShift Mode PICTUREO Record Quality AUDIOO Recorded TV Schedule List TIMEO Manual Record OPTIONO HDD Format SCREENO DVR
It is not possible to use ISM Method and Low power in L C D T V models. G In Analogue mode, 5V Antenna Power, Booster, Software Update, Diagnostics and CI Information will not be displayed. G When you play recorded programmes, some of SETUP functions are not activated.
AUTO PROGRAMME TUNING (IN DIGITAL MODE)
Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted.
It is not possible to use this function while recording a programme.
Press the MENU button and then D or E button to select the SETUP menu.
Press the G button and then D or E button to select Auto Tuning.
SETUPG Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit 5V Antenna Power TIMEO Booster OPTIONO Software Update SCREENO Diagnostics D V RO CI Information
Press the G button to begin auto tuning. Use NUMBER buttons to input a 4-digit password in Lock System On. The message All service-information will be updated. Continue? will appear.
Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Booster Software Update Diagnostics CI Information
If you want to keep on auto tuning select YES with using the F or G button. Then, press the OK button. Otherwise select NO.
Auto Tuning Programme(s) Programme(s) %

MENU Stop

To stop auto tuning, press the MENU button.

UHF CH.

MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
Press the G button and then D or E button to select Manual Tuning.
Press the G button and then D or E button or NUMBER buttons to select the desired channel number. Use NUMBER buttons to input a 4-digit password in Lock System On.

After the Software Update is complete, the System takes about one minute to restart.
DIAGNOSTICS (IN DIGITAL MODE ONLY)
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned MUX. This displays the signal information and service name of the selected MUX.
Press the M E N U button and then D or E button to select the SETUP menu.
Press the G button and then use D or E button to select Diagnostics.
Press the G button to display Manufacturer, Model/Type, Serial Number and Software Version.
Press the E X I T button to return to normal TV viewing.
Engineering Diagnostics i Channel 30 Manufacturer : LG Electronics Inc. Model / Type Transmitter : Teracom_Mux_2 : 37LC2D-EC Signal strength Serial No. : 604KG0000006 53% Software version : 1.1.0 Signal quality
CH 30 CH YLE PEU 3 YLE TVYLE FST 7 YLE FSR+

Menu Prev.

1 YLE TVYLEQ 6 YLEN KLASS 8 YLE24

Back Select

CI [COMMON INTERFACE] INFORMATION (IN DIGITAL MODE ONLY)
This function enables you to watch some scrambled services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output. This may be incompatible with the CI module and smart card. CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances.
Press the G button and then D or E button to select CI Information.
Press the G button and then OK button.
Press the D or E button to select the desired item: Module information, smart card information, language, or software download etc.

Module

Press the OK button.
This OSD is only for illustration and the menu options and screen format will vary according to the Digital pay services provider. It is possible for you to change CI (Common Interface) menu screen and service by consulting your dealer.

Viaccess Module

Consultations Authorizations Module information

Select the item

AUTO PROGRAMME TUNING (IN ANALOGUE MODE)
All stations which can be received are stored by this method. It is recommended that you use Auto tuning during installation of this TV. It is not possible to use this function while recording a programme.
Press the M E N U button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Auto Tuning. Press the G button to select System. Select a TV system with the F or G button; L : SECAM L/L (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)

You can assign a station name to each programme number.
Storage System Band Channel Fine Search Name C
Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Manual Tuning. Press the G button and then D or E button to select Name. Press the G button and then D or E button. You can use the alphabet A to Z, numbers 0 to 9, +/ -, and blank. Press the F or G button to select the position and make your choice of the second character, and so on. Press the OK button to store settings. Press the EXIT button to return to normal TV viewing.
Storage System Band Channel Fine Search Name
PROGRAMME EDIT (IN ANALOGUE MODE)
This function enables you to delete or skip stored programmes. You can also move some programmes to other programme numbers or copy blank programme data into a selected programme number. It is not possible to use this function while recording a programme.
Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Programme Edit. Press the G button to display the Programme Edit menu.
Deleting a programme Select a programme to be deleted with the D or E or or G button.
Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position.

Copying a programme

Select a programme to be copied with the D or E or or G button.
Press the GREEN button. All the following programmes are shifted down one position.
Moving a programme Select a programme to be moved with D or E or F or G button. Press the YELLOW button. Move the programme to the desired programme number with the D or E or F or G button. Press the YELLOW button again to release this function.

a b c d

Skipping a programme number Select a programme number to be skipped with D or E or F or G button. Press the BLUE button. The skipped programme number turns to blue. Press the BLUE button to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the PR + or button during normal TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. Selecting a Favourite Programme Select your favourite programme number with D or E or F or G button. Press the FAV button. The selected programme will be added to the favourite programme list and the heart symbol will appear in front of that programme number.
SELECTING THE PROGRAMME TABLE
You can check which programmes are stored in the memory by displaying the programme table.

FAV VOL

Displaying programme LIST
Press the LIST button to display the PROGRAMME LIST menu. The programme list appears on the screen. You may find some blue programmes. These have been set up to be skipped by auto programming or in the programme edit mode. Some programmes with the channel number shown in the programme LIST indicate there is no station name assigned.

DTV List

801 YLE TVYLE TVYLE FST 804 YLEYLE Teema 806 TV4
< In Digital Mode >
Selecting a programme in the programme list

Programme List

Select a programme with the D or E button. Press the OK button. The TV switches to the chosen programme number.
BBC1 C 01 C 04 C 05 BLN 2 C 05
Paging through a programme list < In Analogue Mode > Programme LIST pages contain 100 programmes in total.
Press the D or E button repeatedly to turns the pages. Press the LIST button to return to normal TV viewing.
the favourite programme table

A Displaying

Mini Glossary Displayed when the Favourite Programme. Displayed when the Locked Programme.
Press the FAV button to display the Favourite Programme table menu.

INPUT SOURCE SELECTION

Selects a label for each input source which is not in use.

EXIT TIME SHIFT

Press the M E N U button and then use D or E button to select the OPTION menu.
Press the G button and then use D or E button to select Input Label.
Press the G button and then use D or E button to select the source: AV1, AV2, AV3, Comp., RGB, HDMI1 or HDMI2.
Press the F or G button to select the label.
Language Country Lock System Parental Control Input Label SIMPLINK Factory Mode

AV1 AV2 AV3

Comp. RGB HDMI1 HDMI2
Press EXIT button to return to normal TV viewing.

FUNCTION

This fundtion operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you require the SIMPLINK menu, select On.
Press the G button and then D or E button to select SIMPLINK.
Press the G button and then D or E button to select Off or On.

SIMPLINK Functions

Disc playback Control connected AV devices by pressing the D or E or F or G, OK, buttons. , , , , , and

LIVE 3 4

The Progress Bar?
After selecting TimeShift Mode On, press the O K button. As soon as TimeShift Mode starts, a progress bar indicating the current recording status is displayed in the bottom of the screen. Press the E X I T button to hide the Progress Bar or press the O K button to display the 'Progress Bar'. This function is preserved even when changing a programme or progressing the TimeShift Mode.
This function indicates what DVR reviewing is possible,a current on-screen and live broadcasting position.
Status of current displayed video. Current save time. 15 minute intervals from TimeShift Mode start time. (Total - one hour). Indicates current TimeShift Mode position.
When finishinging with the TimeShift Mode function, enter the option menu and turn TimeShift Mode O f f.
DVR (Digital Video Recorder) : A device which records and plays broadcast programme contents onto a hard disk in TV or SET TOP BOX. The total storage space of the hard-disk is 1 GB. GB minimum is reserved for TimeShift Mode. When turning power on, it may take up to a maximum of 3 minutes to initialise the HDD. The Recording function will not initiate for a copy-protected programme. Because an analogue broadcast is converted to a digital signal, video which contains rapid movement may show "cross stripes". This happens when the analogue signal is compressed and then restored in the digital signal. The unit will attempt to reduce excessive picture interference. TimeShift Mode is available in DTV, TV, AV1, AV2, AV3 mode. TimeShift Mode is available for Audio only channels. When pressing the P a u s e( I I) button in TimeShift Off mode, TimeShift starts. TimeShift remains active even when you change channels. In the case of DTV, the maximum DTV recording duration displayed as Free space may be slightly different from the actual maximum recording duration.
Using the TimeShift Mode function, play
When in TimeShift Mode, the following options are available.

DELAYED

Indicates that the current broadcast and displayed video differ.

Using the remote control

You can shift playback to any point within the recorded programme. When playing, repeatedly, press the R E W( FF) button to speed up F -> FF -> FFF -> FFFF -> FFFFF. repeatedly, press the F F ( GG) button to speed up GG-> GGG -> GGGG -> GGGGG.
Pressing these buttons repeatedly increases the fast forward/reverse speed.

Press the I FF or GGI

Schedule List Manual Record TV Menu 1
I n p u t : Select the input source from the DTV, RADIO, TV, AV1, AV2, AV3. P r o g r a m m e : Select either the current programme or a scanned programme. D a t e : You can select a date up to one month in advance. S t a r t / E n d : Ensure you have set these correctly. R e p e a t : Choose either Once, Daily, Weekly, Weekend, Weekday.
After setting the M a n u a l R e c o r d , press the O K button.
Button Function in Manual Record Mode
Remote Control Buttons D or E F or G EXIT Function Select required items with Up/down button. Selects the required fields. OSD disappears. Displays the reservation list after the recording has been registered.

Manual Record

Input DTV Programme 1 BBC ONE Date Fri Mar 30 Start 10:26 Fri Mar 30 10:24 End Repeat 10:56 Once

Navigation

Modify

Cancel

RECORDED TV PROGRAMME LIST
You can view the recorded programme list at a glance. This function is also available in the DVR menu. Information function is only applicable when the country selected is UK.
Press the D V R button to display H O M E menu. Use the D or E button to select Recorded TV and then use the O K or G button.
Free Space 23h 01m 3h 01m Page 3/27 To Buy or Not to Buy In the Night Garden Schools : Primary Geog
Input Date Duration Quality

: : : :

DTV 1 Fri Mar 30m High

0 Marked

Recorded TV Programme Guide Schedule List

Fri Fri Fri Fri Fri

Mar 30 Mar 30 Mar 30 Mar 30 Mar 30
10:49 10:36 10:36 10:21 10:20

Class TV : Revisewise

Manual Record TV Menu

30 Jahre 68 : Revolte

Information Move Page

EXIT MARK

Exit Mark

Popup Menu

When the highlighted recording is a locked programme or a rated programme, the preview window displays LOCKED SERVICE instead of the Play screen. If you wish to play locked or rated recordings, you must enter the password.
Recorded TV Input Date Duration Quality : : : : DTV 1 Fri Mar 30m High
0 Marked Fri Mar 30 10:49 10:36 10:36 10:21 10:20

LOCKED SERVICE

Free Space 23h 01m 3h 01m Page 3/27 To Buy or Not to Buy In the Night Garden
Fri Enter Password Mar 30

Schools : Primary Geog

- Mar 30

Mar 30 Mar 30

If the HDD has a problem performing a recording related function, this message is displayed. If the temperature is below zero (0), a warning message is displayed and you will not be able to use the DVR functions.
HDD initialisation in progress. Please try again later.
Low temperature. DVR initialisation cannot start. 4
Playing recorded programmes
- You can play a selected programme from the recorded programme list.
The Progress Bar? This function indicates what DVR reviewing is possible ,a current onscreen and live broadcasting position, a section of section-recording. 1 Indicates progress of recorded programme. 2 Indicates status of recorded programme. 3 Indicates elapsed playback time. 4 Indicates total playback time. 5 Indicates a quarter of programme runtime. 6 Indicates current playback position.
Play a recorded programme. While playing, You will see a playback screen as shown below. Initially, an icon showing the current playback mode is displayed PLAYING. Press the O K button to display the progress bar To stop displaying the recorded programmes icon, press the E X I T button.

PLAYING 5 6

You can shift playback to any point within the recorded programme. When playing, repeatedly, press the R E W( FF) button to speed up F -> FF -> FFF -> FFFF -> FFFFF. repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG.
Press the P a u s e ( I I) button and then use the F F (GG) button for slow motion (as showing the.) When using the F or G button during playback the cursor can be viewed on the screen.
Press the P L A Y ( G) button to return to normal playback. If you want to return to the current live broadcast, press the L I V E T V button.
If you press the S T O P (A) button, you can view live TV.

Chase playback

During recording, you can Trick play a programme that is being recorded without interrupting recording by using the Progress Bar.
The Progress Bar? This function indicates what DVR reviewing is possible ,a current onscreen and live broadcasting position, a section of section-recording. 1 Indicates progress of recorded programme. 2 Indicates status of recording programme. 3 Indicates elapsed recording time. 4 Indicates total recording time. 5 Indicates a quarter of programme runtime. 6 Indicates current playback position.

Schedule List Catch me if you can 027 Discovery Channel Wed Oct 17 Series Record Overall Schedule The Lord of the Rings Catch me if you can TV 11 DiscoveryRTime TV 1BBC (Weekdays) Ally Mcbeal (Weekends) DTV 4 Bloomberg (Weekly) Royal Ceremony
Sat. Oct 30 19:10 18:20 - 21:20 Page 1/1

Recommended

Tue. Feb 13 Tue. Feb 13 Wed. Feb 14 Wed. Feb 14 Thu. Feb 15 Fri. Feb 16 Fri. Feb 16
13:00 15:12 5:34 6:00 7:35 15:21 22:00

Popup Menu Guide

Move Page Weekly Schedule
Information Manual Record

RECORD QUALITY

This function is not available while a recording is taking place. (Only for analogue schedule recording)
Press the M E N U button and then use D / E button to select the D V R menu. Press the G button and then use D / E button to select Record Quality. Press the G button and then use D / E button to select H i g h or Normal. Press the EXIT button to return to normal TV viewing.

High Normal

Only for analogue schedule recording (TV, AV1, AV2, AV3).

FORMAT HARD DISK

Erases all programmes and initialises the hard drive.
Press the M E N U button and then use D / E button to select the D V R menu. Press the G button and then use D / E button to select HDD Format. Press the G button to start HDD Format. if you press the G button, this message is displayed.
Do you want to format HDD?

Yes No

To set
if you select Yes, this message is displayed.
HDD format in progress. 2 3
When completing, this message is displayed.
HDD initialisation successful.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster). This function can be used only when the EPG information is broadcast by broadcasting companies. The EPG displays the programme details for next 8 days.

Switch on/off EPG

Press the GUIDE button to switch on EPG. Press the GUIDE or EXIT button again to switch off EPG and return to normal TV viewing.

Schedule Overlap

The Weakest Link 2 BBC TWO Fri Mar 23 17:15~18:00 To schedule this, some timer changes are needed. Ginas Laughing Gear 1 BBC ONE Fri Mar 23 17:00~17:30 -> Ginas Laughing Gear 70 CBBC Channel Sat Mar 24 18:30~18:58

EXIT GUIDE

PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; : 9, O r i g i n a l, 4 : 3, : 9 and Z o o m 1 / 2.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using D or This function works in the following signal.

button.

Press the RATIO button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the SCREEN menu.
16:9 The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for viewing 4:3 formatted DVDs).
Original When your TV receives a wide screen signal it will automatically change to the picture format broadcast.

Original

4:3 The following selection will allow you to view a picture with an original 4:3 aspect ration, grey bars will appear on both the left and right of the screen.
Zoom1 The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.

4:3 Zoom1

14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right.
Zoom2 Choose Zoom 2 when you wish the picture to be altered, both horizontally extended and vertically cropped. The picture adopting a compromise between alteration and screen coverage.

G G G G

You can only select : 9 (Wide), 4 : 3, Zoom 1/2 in Component, HDMI mode. You can only select : 9 (Wide), 4 : 3, in RGB mode only. You can only select : 9 (Wide), 4 : 3, : 9, Zoom 1/2 in a delayed mode and during the playback of recordings of TV, AV1, AV2 and AV3 input. Aspect ratio control of the delayed mode and the playback is managed separately with the normal input mode.

PRESET PICTURE SETTINGS

Picture Mode-Preset
I n t e l l i g e n t E y e Adjusts picture according to the surrounding conditions. (LCD TV Models only) Dynamic Select this option to display a sharp image. Standard The most general and natural screen display status. Mild Select this option to display a mild image. User 1/2 Select this option to use a user defined setting.
Press the MENU button and then D or E button to select the PICTURE menu. Press the G button and then D or E button to select Picture Mode. Press the G button and then D or E button to select Intelligent Eye (LCD TV Models only), Dynamic, Standard, Mild, User 1, or User 2. Press the EXIT button to return to normal TV viewing. Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the programme category. Intelligent Eye (LCD TV Models only), Dynamic, Standard and Mild are programmed for optimum picture reproduction at the factory and cannot be changed. When the Intelligent eye function is on, the most suitable picture is automatically adjusted according to the surrounding conditions. (LCD TV Models only)

LOW-POWER PICTURE MODE

This function allows you to reduce the power consumption of the TV. It is not possible to use this function with LCD models.
Press the G button and then D or E button to select Factory Mode. Press the G button and then D or E button to select Low power. Press the G button and then F or G button to select Off or On. Press the EXIT button to return to normal TV viewing.
Set ID 1 Factory Reset OK ISM Method Normal Low Power
SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER

EXIT BACK DVR MENU GUIDE
AVL automatically remains on the same level of volume if you change programmes.
Press the MENU button and then select the AUDIO menu.
SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO Digital Audio Out OPTIONO SCREENO D V RO
Press the G button and then D or E button to select Auto Volume. Press the G button and then D or E button to select Off or On. Press the EXIT button to return to normal TV viewing.
Sound Mode Auto Volume Balance TV Speaker Digital Audio Out
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Surround MAX, Standard, Music, Movie or Sports and you can also adjust the frequency of the equalizer. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. S u r r o u n d M A X , S t a n d a r d , M u s i c , M o v i e , and S p o r t s are preset for optimum sound quality at the factory and are not adjustable. S u r r o u n d M A X Select this option for the most realistic sound. S t a n d a r d Commanding and natural audio. Music Select this option to enjoy the original sound when listening to music. Movie Select this option to enjoy sublime sound. Sports Select this option to watch sports broadcasting. User Select this option for user-defined audio settings.
Surround MAX Standard Music Movie Sports User
Press the M E N U button and then D or the AUDIO menu.

button to select

Press the G button and then D or Sound Mode.
Press the G button and then D or E button to select Surround MAX, Standard, Music, Movie, Sports or User.
SOUND SETTING ADJUSTMENT -USER MODE

DUAL I DUAL II DUAL I+II

Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker.
NICAM Reception (In Analogue Mode Only)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received by pressing the I/II button repeatedly.
When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O.
When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O. If the stereo signal is weak, switch to F M m o n o.
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or N I C A M D U A L I + I I or M O N O.
Speaker Sound Output Selection
In AV, S-Video, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I / I I button to select the sound output.
L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is sent to the right loud speaker. L+L: Audio signal from audio L input is sent to left and right loud speakers. R+R: Audio signal from audio R input is sent to left and right loud speakers.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
Press the D or E or F or G button and then, O K button to select your desired language. Press the D or E button and then, O K button to select your country.
* If you want to change Language/ Country selection
Press the G button and then use D or E button to select Language. The menus can be shown on the screen in the selected language. Or, Press the G button and then use D or E button to select Country. Press the G button and then use F or G button to select your desired language or country. Press the O K button.

UPDATE

SLEEP SUBTITLE
If you do not finish the set-up I n s t a l l a t i o n G u i d e by pressing E X I T or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on. If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. The CI (Common Interface) function may not be applied based on country broadcasting circumstances. DTV mode control buttons may not function based on country broadcasting circumstances.
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The A u d i o function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played.

Note R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON (POWER ON/OFF) R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON

II IFF GGI

FF GG A O

DVR LIVE TV

EXTERNAL CONTROL DEVICE SETUP

RS-232C Setup

Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the TVs functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. Note: RS-232C connection cables are not supplied with the TV.
PCMCIA CIA CARD SLOT RS-232C IN (CONTROL & SERVICE) RGB IN
Type of Connector; D-Sub 9-Pin Male
No. 9 Pin Name No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable) PC RXD TXD GND DTR DSR RTS CTS 8 D-Sub 9 TV 7 D-Sub 9 TXD RXD GND DSR DTR CTS RTS RXD TXD GND DTR DSR RTS CTS 3-Wire Configurations(Not standard) PC 8 D-Sub 9 TV 8 D-Sub 9 TXD RXD GND DTR DSR RTS CTS

Set ID

Use this function to specify a set ID number. Refer to Real Data Mapping. G p.116
Press the G button and then use D or E button to select Factory Mode.
Press the G button and then use D or E button to select Set ID.
Press the G button and then use F or G button to adjust Set ID to choose the desired TV ID number. The adjustment range of SET ID is 1~99.
Press E X I T button to return to normal TV viewing.
Factory Reset ISM Method Normal Low Power Off

Communication Parameters

Baud rate : 9600 bps (UART) Data length : 8 bits A Parity : None
Stop bit : 1 bit Communication code : ASCII code A Use a crossed (null modem) cable.

Command Reference List

COMMAND COMMAND DATA (Hexadecimal) 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07 Contrast. 08. Brightness 09. Colour 10. Tint 1 Sharpness 1. 1 OSD Select 2. 1 Remote control lock mode 3. 1 Balance 4. 1 Colour Temperature 5. 1 Red Adjustment 6. 1. Green Adjustment Blue Adjustment 8. 19. Abnormal Status 20. ISM Method 21. Low Power 22. Orbiter Time Setting 23. Orbiter Pixel Setting 24. Auto Configure 25. Channel Select Command 26. Send IR Code 27 Input select (Main). k k k k k k k k k k k k k k k k k k k j j j j j m m x a b c d e f g h i j k l m t u v w $ z p q r s u a c b 0~1 0~7 Refer to p. 0~1 0~~ ~ ~ ~ ~ ~ 64 0~1 0~~ 64 0~~ ~ ~ 50 0~7 Refer to p. 0~~ FE 0~Refer to p. Key Code Refer to p. 1 17

Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. * : You can adjust the TV ID to choose * [Set ID] desired monitor ID number in option menu. Adjustment range is 1 ~ 99. When selecting Set ID 0, every connected TV is controlled. Set ID is indicated as decimal (1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol. : To transmit command data. * [DATA] Transmit FF data to read status of command. : Carriage Return * [Cr] ASCII code 0x0D : ASCII code space (0x20) * [ ]

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x] * The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x] * The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data 1: Illegal Code 2: not support function 3: Wait more time
, * When setting the 19 ~ 27 a menu does not appear on screen.
01. Power (Command 2 : a)
G To control Power On/Off of the TV.
04. Screen Mute (Command 2 : d)
G To select screen mute on/off.
[k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Ack [a][ ][Set ID][ ][OK][Data][x]

G To show Power On/Off.

[k][d][ ][Set ID][ ][Data][Cr] 1 : Power On Data 0 : Screen mute on (Picture off) 1 : Screen mute off (Picture on)
[d][ ][Set ID][ ][OK][Data][x] 05. Volume Mute (Command 2 : e)
G To control volume mute on/off.
[k][a][ ][Set ID][ ][FF][Cr]
[a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit 0xFF data based on this format, Acknowledgement data feed back presents status about each function. 02. Input Select (Command 2 : b)
G To select an input source for the TV.
You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 0 : Volume mute on (Volume off) 1 : Volume mute off (Volume on) Ack [e][ ][Set ID][ ][OK][Data][x] 06. Volume Control (Command 2 : f)

G To adjust volume.

You can also select an input source using the INPUT button on the TV's remote control.
[k][b][ ][Set ID][ ][Data][Cr] Data 4 : DTV : Analogue : AV1 : AV2 : AV8 : Component : RGB-PC : HDMI1 : HDMI2
You can also adjust volume with the VOLUME buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 16. * Refer to Real data mapping 1. See page 1 Ack [f][ ][Set ID][ ][OK][Data][x] 07. Contrast (Command 2 : g)