TELETEXT

Switch on/off. 100 SIMPLE Text. 100 TOP Text. 100 FASTEXT. 101 Special Teletext Functions. 101
SOUND & LANGUAGE CONTROL DIGITAL TELETEXT
Auto Volume Leveler. 84 Preset Sound Settings - Sound Mode. 85 Sound Setting Adjustment - User Mode. 86 Balance. 87 TV Speakers On/ Off Setup. 88 Selecting digital audio out. 89 I/II - Stereo/Dual Reception (In Analogue Mode Only). 90 - NICAM Reception (In Analogue Mode Only). 91 - Speaker Sound Output Selection. 91 On-Screen Menus Language/Country Selection. 92 Language selection (In Digital Mode only). 93 Teletext within Digital Service. 102 Teletext in Digital Service. 102

APPENDIX

Troubleshooting. 103 Maintenance. 105 Product Specifications. 106 Programming the Remote Control. 107 IR Codes. 109 External Control Device Setup. 1

TIME SETTING

Clock Setup. 94 Auto On/ Off Timer Setting. 95 Auto Shut-off Setting. 96 Time zone Setup. 97 Sleep Timer Setting. 97
PARENTAL CONTROL / RATINGS
Set Password & Lock System. 98 Parental Control. 99

HOME MENU

This menu is a contents guide. In the Home Menu, you can access the Recorded list of the DVR, Manual Recording of the DVR, Schedule List or the TV Menu.

INPUT D/A TV/RADIO INPUT

MODE TV DVD

Free Space

This displays the remaining record time for analogue input. (Analog TV, AV1,AV2, AV3) This displays the remaining record time for DTV input.

BRIGHT VCR

SIMPLINK TEXT

INFO i

LIVE TV

Recorded TV

BACK EXIT DVR MENU GUIDE
Programme Guide Schedule List Manual Record

TIME SHIFT

FAV VOL PR

TV Menu

FRONT PANEL CONTROLS
This is a simplified representation of the front panel. Image shown may differ from your TV. If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.

Plasma TV Models

Remote Control Sensor
Power/Standby Indicator illuminates red in standby mode. illuminates green when the TV is switched on.

INPUT MENU OK VOL

VOLUME

PROGRAMME

LCD TV Models

OK MENU

OK MENU INPUT POWER
Intelligent Eye Power/Standby Indicator Adjusts picture illuminates red in standby mode. according to the Remote Control Sensor illuminates green when the TV is switched on. surrounding conditions.

BACK PANEL INFORMATION

This is a simplified representation of the back panel. Image shown may differ from your TV.

AV IN 3 AV IN 3 V

S-VIDEO

VIDEO L/MONO AUDIO R

AV IN 2
L/MONO VIDEO L/ MONO AUDIO R
S-Video Input Connect S-Video out from an S-VIDEO device. Audio/Video Input Connect audio/video output from an external device to these jacks.

To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment. This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the Plasma TV models.

HD RECEIVER SETUP

This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below. AV 1 PCMCIA

CARD SLOT RS-232C IN

Connecting with a component cable
Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O jacks on the TV. Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O jacks on the TV.
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select COMPONENT input source using the I N P U T button on the remote control.
Signal 480i/576i 480p/576p 720p/1080i 1080p

Component Yes Yes Yes No

HDMI1/2 No Yes Yes Yes
PCMCIA CARD SLOT RS-232C IN
Connecting a set-top box with an HDMI cable
EJECT HDMI/DVI IN 1 HDMI IN 2
Connect the digital set-top box to H D M I / D V I I N or H D M I I N jack on the TV. Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.)

ANTENNA NA IN

Select HDMI1 or HDMI2 input source using the I N P U T button on the remote control.
Connecting with a HDMI to DVI cable

AV 1 AV 2

32C IN
Connect the digital set-top box to H D M I / D V I I N jack on the TV. ANTENNA
Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the TV. Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select HDMI1 input source using the I N P U T button on the remote control.

DVD SETUP

Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. Turn on the DVD player, insert a DVD. Select COMPONENT input source using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.

Component Input ports

Component ports on the TV
To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Y PB PR

PB B-Y Cb Pb

SETUPG Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit TIMEO OPTIONO SCREENO D V RO
Press the E button to select Storage From. Select the initial programme number with the F or G button or NUMBER buttons on the Storage From menu.
Press the E button to select Start. The station name is stored for stations which broadcast VPS (Video Programme Service), PDC (Programme Delivery Control) or TELETEXT data. If no station name can be assigned to a station, the channel number is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47), followed by a number. To stop auto tuning, press the MENU button. When auto tuning is complete, the Programme Edit menu appears on the screen. See the Programme Edit section to edit the stored programme.
Auto Tuning Manual Tuning Programme Edit
System Storage From Start
MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. It is not possible to use this function with TimeShift Mode On.
Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Manual Tuning. Press the G button to select Storage. Select the desired programme number with the F or G button or NUMBER buttons on the Storage menu.

Q.VIEW

Press the E button to select System. Select a TV system with the F or G button; L : SECAM L/L (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
Press the E button to select Band. Press the F or G button to select V/UHF or Cable as required. Press the E button to select Channel. You can select the desired channel number with the F or G button or NUMBER buttons. If possible, select the channel number directly with the NUMBER buttons.

Storage

1 BG V/UHF 1
System Band Channel Fine Search Name C
Press the E button to select Search. Press the F or G button to commence searching. If a station is found the search will stop. Press the OK button to store settings. To store another station, repeat steps 3 to 8. Press the EXIT button to return to normal TV viewing.

P L A Y ( G) LIVE TV

Press the P L A Y ( G) button to return to normal playback. If you want to return to the current live broadcast, press the LIVE TV button.

INSTANT RECORDING

Use this function to record the programme you are watching on the main screen (Analogue or Digital broadcast).

Instant Record

This function records the currently displayed programme.
Select the programme you wish to record and then press the O button. REC During recording is displayed. Use this feature to record up to 2 hours of programming.
If you wish to stop recording, press the A button.
While recording, if you press the A button before 10 seconds of recording time has passed, this message is displayed. While Audio recording, if you press the A button before 30 seconds of recording time has passed, this message is displayed. If you press the A button after more than 10 seconds of recording time has passed, this message is displayed.
Recording failed. Length is less than 10 seconds.
Recording failed. Length is less than 30 seconds.

Recording completed.

You can increase or decrease the recording time by pressing the O button while recording. After pressing the O button, press the F or G buttons repeatedly to increase or decrease the recording time. Each time you press F or G button the recording duration changes as shown below. + 10 m i n -> + m i n -> + m i n -> + m i n -> + m i n -> + m i n No Change - 10 m i n -> - m i n -> - m i n -> - m i n -> - m i n -> - m i n
The extra recording time added to the existing setting equals the final recording time.
Recording Options Cricket World Cup 23:40~00:40 23:57
After adjusting the recording time, select O K. The Status bar will be displayed.

Total recording duration

Recording time 23:54~01:55 (2 min recorded)

Set duration

No change

Cancel 3

0:00:00 / 2:00:00

Elapsed recording time

Press the E X I T button to hide the Status bar. Press the O K button to display the Status bar.
Recording stops when the selected duration is reached or when you press the A button. Although recording has stopped, the TimeShift Mode feature remains active.
When recording, if the available storage space is not sufficient, the recording will automatically Stop. In Radio mode, recordings of less than 30 seconds will not be saved. In other modes, recordings of less than 10 seconds will not be saved. No data will be saved on paid channels with no CI Card or expired period of validity of CI Card, in invalid services and in data only channels (ex. MHEG) In order to save disk space. The recording function will not initiate for a copy-protected programme. The displayed time differs slightly from the actual time. When there is no signal or a film source is being viewed, the displayed time may differ slightly from the actual time. Recording is not possible with copy-protected programmes. When Instant Recording, this message is displayed.

Recorded TV Input Date Duration Quality
Free Space 23h 01m 3h 01m Page 3/27 To Buy or Not to Buy Fri 0 Marked Mar 30 10:49 10:36 10:36 10:21 10:20
Schedule In the Night Garden
recordingMar 30 failed Fri due to no signal. Do you want to delete? Schools : Primary Geog Fri Mar 30
Class TV : Revisewise YES 30 Jahre 68 : Revolte Fri Fri Mar NO 30 Mar 30
Recorded programme Selection and Popup Menu
The preview recorded list is shown above.
Free Space 23h 01m 3h 01m Page 3/27 To Buy or Not to Buy In the Night Garden Schools : Primary Geog Class TV : Revisewise Fri Fri Fri Fri Fri 0 Marked Mar 30 Mar 30 Mar 30 Mar 30 Mar 30 10:49 10:36 10:36 10:21 10:20
Use the PR + or PR - button for page up/down navigation.
Use the M A R K button to delete from the list. A is displayed next to the preview window if an item is marked.
Use D or E button to navigate the appropriate thumbnail photo, then press the O K button to open the Pop-up Menu. Play : Begin playback of the selected recording. Mark All : mark all recordings on the screen. Unmark All : Change marked recordings to unmarked recordings. Delete : Delete the selected recording. Rename : Edit the recorded programme title. Cancel : Close the Pop-up Menu.

23h 01m 3h 01m

Page 3/27 To Buy or Not to Buy In the Night Garden Schools : Primary Geog Class TV : Revisewise 30 Jahre 68 : Revolte DTV 1 10:49~11:19 Play Mark All Delete Rename Cancel Fri Mar 30
Free Space 23h 01m 3h 01m Page 3/27 To Buy or Not to Buy In the Night Garden Schools : Primary Geog Class TV : Revisewise 30 Jahre 68 : Revolte DTV 1 10:49~11:19 Play Mark All Delete Rename Cancel Fri Mar 30 10:36 10:21 10:Marked 10:49 10:36
Repeatedly, press the E X I T button to return to TV viewing or press the D V R button to return to the H o m e menu.
If the HDD has a problem performing a recording related function, this message is displayed. If the temperature is below zero (0), a warning message is displayed and you will not be able to use the DVR functions.
HDD initialisation in progress. Please try again later.
Low temperature. DVR initialisation cannot start. 4
Playing recorded programmes
- You can play a selected programme from the recorded programme list.
The Progress Bar? This function indicates what DVR reviewing is possible ,a current onscreen and live broadcasting position, a section of section-recording. 1 Indicates progress of recorded programme. 2 Indicates status of recorded programme. 3 Indicates elapsed playback time. 4 Indicates total playback time. 5 Indicates a quarter of programme runtime. 6 Indicates current playback position.
Play a recorded programme. While playing, You will see a playback screen as shown below. Initially, an icon showing the current playback mode is displayed PLAYING. Press the O K button to display the progress bar To stop displaying the recorded programmes icon, press the E X I T button.

Press the G button and then D or E button to select either Cool, Medium, Warm, or User.

Cool Medium Warm User

MANUAL PICTURE ADJUSTMENT

Picture Mode-User option

Contrast Brightness Colour Sharpness Adjusts the difference between light and dark levels in the picture. Increases or decreases the amount of white in the picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels.
SETUPO Picture Mode G Colour Temperature TIMEO Advanced Picture Reset Demo
AUDIOO OPTIONO SCREENO D V RO
Press the M E N U button and then D or E button to select the PICTURE menu.
Press the G button and then D or E button to select Picture Mode.
Picture Mode Colour Temperature

1 PICTURE CONTROL

Press the G button and then D or E button to select User 1 or User 2.
Advanced Picture Reset Demo
Press the G button and then D or E button to select the desired picture option (Contrast, Brightness, Colour, Sharpness and Tint).
Press the F or G button to make appropriate adjustments.
User 1 Contrast Brightness Colour Sharpness Tint 0
You cannot adjust colour, sharpness and tint in the RGBPC mode.
Colour Tone - User option
To adjust red, green, blue to any colour temperature you prefer.

OPTIONO SCREENO D V RO

Press the G button and then D or E button to select User.
Press the G button and then D or E button to select Red, Green or Blue.

User Red Green Blue 0

XD - PICTURE IMPROVEMENT TECHNOLOGY
XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. It is not possible to use this function in RGB-PC mode.
Press the MENU button and then D or E button to select the PICTURE menu. Press the G button and then D or E button to select XD. Press the G button and then D or E button to select Auto or Manual. Press the E X I T button to return to normal TV viewing.

* Manual Selection

This menu is activated after selecting the User1 or User2 of P i c t u r e M o d e.

Auto Manual XD Contrast On XD Colour On XD NR Low
Press the G button and then D or E button to select X D Contrast, XD Colour, XD NR or MPEG NR. Press the G button and then D or or Off.

button to select On

MPEG NR
Picture Mode Colour Temperature Advanced Picture Reset Demo Auto Manual XD Contrast On XD Colour On XD NR Low MPEG NR 0
X D C o n t r a s t : Optimises the contrast automatically according to the brightness of the reflection. A X D C o l o u r : Adjusts the colour of the reflection automatically to reproduce as close as possible natural colours. A X D N R : Removes interference up to the point where it does not damage the original picture. A M P E G N R : Reduces interference which may appear on the screen while watching TV.
Use it to see the difference between XD Demo on and XD Demo off.
It is not possible to use this function in RGB[PC],HDMI[PC] mode.
Press the MENU button and then D or E button to select XD Demo.
Press the G button to begin XD Demo.
To stop X D D e m o, press the M E N U or E X I T button.

To Start

XD Demo

XD Off XD On

Menu Exit

ADVANCED - CINEMA

To set the TV up for the best picture quality for viewing films.
This feature operates only in TV, AV, S-Video and Component 480i/576i mode.
It is not possible to use this function while playing a recorded programme.
Press the G button and then D or E button to select Advanced.
Press the G button and then D or E button to select Cinema.
Cinema Off Black Level Low
Press the G button and then F or G button to select On or Off.
Picture Mode Colour Temperature Advanced Picture Reset Demo Cinema

F G On

Black Level Low
ADVANCED - BLACK(DARKNESS) LEVEL
When you view a film this function adjusts the TV to best picture quality. Adjusting the contrast and the brightness of the screen using the black level of the screen. This function works in the following mode: AV (NTSC-M), SVideo (NTSC-M) or HDMI.
It is not possible to use this function while playing a recorded programme Press the M E N U button and then D or E button to select the PICTURE menu.

Press the MENU button and then select the AUDIO menu.
SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO Digital Audio Out OPTIONO SCREENO D V RO
Press the G button and then D or E button to select Auto Volume. Press the G button and then D or E button to select Off or On. Press the EXIT button to return to normal TV viewing.
Sound Mode Auto Volume Balance TV Speaker Digital Audio Out
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Surround MAX, Standard, Music, Movie or Sports and you can also adjust the frequency of the equalizer. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. S u r r o u n d M A X , S t a n d a r d , M u s i c , M o v i e , and S p o r t s are preset for optimum sound quality at the factory and are not adjustable. S u r r o u n d M A X Select this option for the most realistic sound. S t a n d a r d Commanding and natural audio. Music Select this option to enjoy the original sound when listening to music. Movie Select this option to enjoy sublime sound. Sports Select this option to watch sports broadcasting. User Select this option for user-defined audio settings.
Surround MAX Standard Music Movie Sports User
Press the M E N U button and then D or the AUDIO menu.

button to select

Press the G button and then D or Sound Mode.
Press the G button and then D or E button to select Surround MAX, Standard, Music, Movie, Sports or User.
SOUND SETTING ADJUSTMENT -USER MODE
Adjusting the audio equalizer.
Press the G button and then D or

button to select User.

Press the G button.
Select a frequency band by pressing the F or G button. Set the desired sound level with the D or E button.
User 120Hz 200Hz 500Hz 1.2KHz 3KHz 7.5KHz 12KHz

BALANCE

You can adjust the sound balance of the speakers to preferred levels.
Press the MENU button and then select the AUDIO menu. Press the G button and then Balance. Press the G button and then desired adjustment.

button to make

TV SPEAKERS ON/ OFF SETUP
You can adjust the internal speaker status. In A V 1 , A V 2 , A V 3 , C O M P O N E N T , R G B and H D M I with H D M I to D V I cable, the TV speaker can be operational even when there is no video signal.
If you wish to use an external hi-fi system, turn off the TV internal speakers.
Press the G button and then D or E button to select TV Speaker. Press the G button and then D or E button to select Off or On. Press the EXIT button to return to normal TV viewing.

When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O. If the stereo signal is weak, switch to F M m o n o.
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or N I C A M D U A L I + I I or M O N O.
Speaker Sound Output Selection
In AV, S-Video, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I / I I button to select the sound output.
L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is sent to the right loud speaker. L+L: Audio signal from audio L input is sent to left and right loud speakers. R+R: Audio signal from audio R input is sent to left and right loud speakers.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
Press the D or E or F or G button and then, O K button to select your desired language. Press the D or E button and then, O K button to select your country.
* If you want to change Language/ Country selection
Press the G button and then use D or E button to select Language. The menus can be shown on the screen in the selected language. Or, Press the G button and then use D or E button to select Country. Press the G button and then use F or G button to select your desired language or country. Press the O K button.

UPDATE

SLEEP SUBTITLE
If you do not finish the set-up I n s t a l l a t i o n G u i d e by pressing E X I T or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on. If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. The CI (Common Interface) function may not be applied based on country broadcasting circumstances. DTV mode control buttons may not function based on country broadcasting circumstances.
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The A u d i o function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played.

Press the MENU button and then select the TIME menu. Press the G button and then Off Time/On Time. Press the G button and then On.
To cancel On/Off Time function, select Off.
Press the G button and then D or E button to set the hour. Press the G button and then D or E button to set the minutes. For On Time function only Programme: Press the G button and then D or E button to select TV, DTV or Radio in the Mode menu. And then, Press the G button and then D or E button to select the programme. Volume: Press the G button and then D or E button to adjust volume level at switch-on.

Volume Mode PR

3 TV 0

AUTO SHUT-OFF SETTING

If the TV is switched on and there is no input signal, it will switch off automatically after 10 minutes.
Press the G button and then D or E button to select Auto Sleep. Press the G button and then D or E button to select Off or On. Press the EXIT button to return to normal TV viewing.

TIME ZONE SETUP

When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.
Press the MENU button and then select the TIME menu. Press the G button and then Time Zone. Press the G button and then your viewing area time zone.

or G button to select

SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed.

Time Zone London GMT

Press the SLEEP button repeatedly to select the number of minutes. The display - - - Min will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.

b c d e

When the number of minutes required is displayed on the screen, the timer begins to count down from the number of minutes selected. To view the remaining sleep time, press the SLEEP button once. To cancel the sleep time, repeatedly press the SLEEP button until the display - - - Min appears. When you switch the TV off, the preset sleep time is cancelled.
SET PASSWORD & LOCK SYSTEM
Enter the password, press 0, 0, 0, 0 on the remote control handset.

Press the G button and then D or E button to select Lock System. Press the G button and then F or G button to select On. To set the password Press the G button and then use the NUMBER buttons to input a 4-digit password. Be sure to remember this number!

Set Password New Confirm

PARENTAL CONTROL / RATING
Re-enter new password for confirm. If you forget your password, press 7, 7, 7, 7 on the remote control handset.

PARENTAL CONTROL

This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. This allows you to set up blocking schemes to block specific channels and ratings. A password is required to gain access to this menu. This TV is programmed to remember which option it was last set to even if you switch the TV off. Recording and TimeShift Mode can be accessed even when locked or rated. When a programme is locked or rated with delayed state, the message locked program is displayed without displaying the password window. When recording a locked or rated programme, the recorded programme will be locked unless you enter the password before the recording is finished. If you wish to play the locked programme, you should enter the password.
Press the MENU button and then D or E button to select the OPTION menu. Press the G button and then D or E button to select Parental Control. Then, press the G button to enter the password as requested. The TV is set up with the initial password 0-0-0-0. Press the G button and then F or G button to select Parental Guidance or Key Lock. P a r e n t a l G u i d a n c e (In Digital mode only) Prevents children from watching certain adults TV programmes, according to the ratings limit set. Key Lock The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorised viewing.

Parental Guidance

Key Lock
In Key Lock On, if the TV is turned off, press the r / I, INPUT, PR D or E button on the TV or POWER, INPUT, D / A, PR + or - or NUMBER buttons on the remote control. With the Key Lock On, the display Key Lock On appears on the screen if any button on the front panel is pressed while viewing the TV.
Press the D or E button to make appropriate adjustments. Press the E X I T button to return to normal TV viewing.

This feature is not available in all countries.
Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.

SWITCH ON/OFF

Press the TEXT button to switch to teletext. The initial page or last page viewed appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the T E X T or E X I T button to switch off teletext. The previous mode reappears.

SIMPLE TEXT

Page selection
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The PR+ or - button can be used to select the preceding or following page.

TOP TEXT

The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block.
Block / group / page selection
With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the PR+ button can be used. The red button returns to the previous selection. Alternatively the PR- button can be used.

Direct page selection

As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode.

FASTEXT

The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.

A Page selection

Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The PR+ or - button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS

A REVEAL

Press this button to display concealed information, such as solutions to riddles or puzzles. Press this button again to remove the information from the display.

A UPDATE

Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Press this button again to view the updated teletext page.

A TIME

When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, PR+ or - or NUMBER buttons. Press again to exit this function.

A HOLD

Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive. To continue press this button again.

DIGITAL TELETEXT

*This function works in UK only.
The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button. If the digital teletext service or the digital teletext only service is on, then Trick Play is not supported. The immediate recording feature is not supported in the digital teletext only service. Digital teletext service is not supported in the delayed mode.
TELETEXT WITHIN DIGITAL SERVICE
Press the numeric or PR + or - button to select a digital service which broadcasts digital teletext. To know which are digital teletext services, refer to the EPG service list. Follow the indications on digital teletext and move onto the next step by pressing TEXT, OK, D or E, F or G, RED, GREEN, YELLOW, BLUE or NUMBER buttons etc. To change digital teletext service, select a different service by the numeric or PR + or - button. If pressing the MENU, GUIDE or INFO i button causes the teletext service disappear temporarily, press these buttons again to return to teletext.
TELETEXT IN DIGITAL SERVICE
Press the numeric or PR + or - button to select a certain service which broadcasts digital teletext. Press the TEXT or coloured button to switch on teletext. Follow the indications on digital teletext and move onto the next step by pressing OK, D or E, F or G, RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on. Press the TEXT or colour button to switch off digital teletext and return to TV viewing. Some services may allow you to access text services by pressing the RED button. If pressing the MENU, GUIDE or INFO i button causes the teletext service disappear temporarily. Press these buttons again to return to the teletext.