MFL34797048-en-4 3/18/08 7:26 PM Page 1
LCD TV PLASMA TV OWNERS MANUAL

LCD TV MODELS

32LG30 37LG30 42LG30 37LG50 42LG50 47LG50 52LG50 32LG70 42LG70 47LG70 52LG70

PLASMA TV MODELS

42PG25 50PG25 50PG60 60PG60
32LG60 37LG60 42LG60 47LG60 52LG60
Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
An extended owners manual that contains information on the advanced features of these LG TV sets is located on the CD-ROM provided in an electronic version. To read these files, you will need to use personal computer (PC) equipped with a CD-ROM drive.
P/NO : MFL34797048 (0803-REV04) Printed in Korea

www.lgusa.com

MFL34797048-en-4 3/18/08 7:26 PM Page 2

WARNING / CAUTION

To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

FCC NOTICE

Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)that produce heat.
Only use attachments/accessories specified by the manufacturer.
When mounting a TV it on the wall, make sure not to install TV by hanging power and signal cables on the back of the TV.
Unplug this apparatus when unused for long periods of time.
MFL34797048-en-4 3/18/08 7:26 PM Page 4
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Outdoor use marking : WARNING - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Never touch this apparatus or antenna during a thunder or lighting storm. Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screen with something. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has exposed to rain or moisture, does not operate normally, or has been dropped.
Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on or over apparatus.
GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Power Supply Short-circuit Breaker
CAUTION concerning the Power Cord : Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

DIGITAL AUDIO OUT Digital audio output for use with amps and home theater systems. Includes an optical and/or coaxial connection. Note: In standby mode, these ports do not work. AUDIO OUT Analog audio output for use with amps and home theater systems. AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). S-VIDEO Better quality than standard composition. Supports standard definition video only (480i). USB INPUT Used for viewing photos and listening to MP3s. USB SERVICE ONLY or RS-232C IN (SERVICE ONLY) Used for software updates. Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power.
MFL34797048-en-4 3/18/08 7:27 PM Page 10

REMOTE CONTROL FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.
TV/STB/DVD/VCR Select the remote operating mode: TV, STB, DVD, or VCR. POWER Turns your TV or any other programmed equipment on or off, depending on the mode. Q.MENU Select the desired quick menu source. MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu. INPUT External input modes rotate in regular sequence. VOLUME UP Increase/decrease the sound level. /DOWN FAV Scroll through the programmed Favorite channels.

TV STB

DVD VCR INPUT

Q. MENU MENU

RETURN

AV MODE

MUTE Switch the sound on or off. CHANNEL Select available channels. UP/DOWN PAGE Move from one full set of screen information to the next one. UP/DOWN NUMBER button (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tune to the last channel viewed.

P A G E

FLASHBK
VCR/DVD, USB, SIMPLINK Control buttons
Control video cassette recorders or DVD players. Control USB menu (PHOTO LIST and MUSIC LIST.) Control the SIMPLINK compatible devices.
MFL34797048-en-4 3/18/08 7:27 PM Page 11
THUMBSTICK Navigate the on-screen menus and adjust the system settings to your preference.
(Up/Down/Left Right/ENTER)
RETURN Allows the user to move return one step in an interactive application or other user interaction function. SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears at the screen. AV MODE It helps you select and set images and sounds.

Installing Batteries

Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AAA batteries. Dont mix old or used batteries with new ones. Close cover.

Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.
Use a platform or cabinet strong enough and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and the one on the TV are the same.
MFL34797048-en-4 3/18/08 7:27 PM Page 20
To prevent damage do not connect to the power outlet until all connections are made between the devices.
ANTENNA OR CABLE CONNECTION
1. Antenna (Analog or Digital)
Wall Antenna Socket or Outdoor Antenna without a Cable Box Connection. For optimum picture quality, adjust antenna direction if needed.
Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)
Copper Wire Be careful not to bend the copper wire when connecting the antenna.

2. Cable

Cable TV Wall Jack

RF Coaxial Wire (75 ohm)

( ) To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly. I If the antenna needs to be split for two TVs, install a 2-Way Signal Splitter. I If the antenna is not installed properly, contact your dealer for assistance.
ANTENNA/ CABLE IN ANTENNA/ CABLE IN

Wall Antenna Socket

Multi-family Dwellings/Apartments (Connect to wall antenna socket)
Outdoor Antenna (VHF, UHF)

Antenna

Signal Amplifier
The TV will let you know when the analog, cable, and digital channel scans are complete.
MFL34797048-en-4 3/18/08 7:27 PM Page 21
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 37/42/47/52LG50.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection

1. How to connect
Connect the video outputs (Y, PB, PR) of the digital settop box to the C O M P O N E N T I N V I D E O 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O 1 jacks on the TV.

Y PB PR L R

2. How to use
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box. operation) Select the C o m p o n e n t 1 input source on the TV using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select the C o m p o n e n t 2 input source on the TV.

RS-232 (CONTROL &

i.e) 37/42/47/52LG50
Supported Resolutions Signal 480i 480p 720p 1080i 1080p Component Yes Yes Yes Yes Yes HDMI No Yes Yes Yes Yes
Y, CB/PB, CR/PR Resolution 720x480i 720x480p 1280x720p 1920x1080i Horizontal Frequency(KHz) 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 Vertical Frequency(Hz) 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00

1920x1080p

MFL34797048-en-4 3/18/08 7:27 PM Page 22

DVD SETUP

Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). i.e) 37/42/47/52LG50
Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the TV.

DIGITA AUDIO (RGB/DVI)

REMOTE CONTROL IN OPTICA
Turn on the DVD player, insert a DVD. Select the C o m p o n e n t 1 input source on the TV using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select the C o m p o n e n t 2 input source on the TV. Refer to the DVD player's manual for operating instructions.
RS-232C I (CONTROL & SER

S-VIDEO V

HDMI Connection
Connect the HDMI output of the DVD to the H D M I / D V I I N 1, 2 , 3 or 4 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. i.e) 37/42/47/52LG50

RGB(PC) U O (RGB/D

Y PB PR L

VIDEO A

Select the HDMI1, H D M I2, HDMI3, or HDMI4 input source on the TV using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.

HDMI-DVD OUTPUT

MFL34797048-en-4 3/18/08 7:27 PM Page 23

VCR SETUP

Composite (RCA) Connection

ANT IN S-VIDEO VIDEO

V Connect the A U D I O/V I D E O jacks between TV and VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red)

ANT OUT

OUTPUT SWITCH
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) I Select the A V 1 input source on the TV using the I N P U T button on the remote control. I If connected to A V I N 2, select A V 2 input source on the TV.
ANTENNA/ CABLE IN DIGITAL AUDIO OUT AUDIO (RGB/DVI)
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the TV.
S-VIDEO VIDEO L (MONO) AUDIO R
S-Video Connection (Except 32/37/42/47/52LG60)
Connect the S-VIDEO output of the VCR to the S - V I D E O input on the TV. Connect the audio outputs of the VCR to the A U D I O input jacks on the TV. i.e) 37/42/47/52LG50

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select the A V 1 input source on the TV using the I N P U T button on the remote control.

1 DIGITAL AUDIO OUT 2

COAXIAL
Do not connect to both Video and S-Video at the same time. In the event that you connect both Video and the S-Video cables, only the S-Video will work.
S-Video provides better quality than composite. Use it when available.
MFL34797048-en-4 3/18/08 7:27 PM Page 24

PC SETUP

VGA (D-Sub 15 pin) Connection
Connect the VGA output of the PC to the R G B ( P C) jack on the TV. Connect the PC audio output to the A U D I O ( R G B / D V I) jack on the TV. i.e) 37/42/47/52LG50

REMOTE CONTROL I

Turn on the PC and the TV. Select the R G B - P C input source on the TV using the I N P U T button on the remote control.

RGB OUTPUT

MFL34797048-en-4 3/18/08 7:27 PM Page 25
Supported Display Specifications (RGB-PC, HDMI-PC)

For 32/37/42LG30

Horizontal Frequency(KHz) 31.469 31.469 31.469 37.879 48.363 47.776 47.720 47.130 Vertical Frequency(Hz) 70.08 70.08 59.94 60.31 60.00 59.87 59.799 59.65 * Only RGB-PC mode 1024x768 1280x768 1280x1024 1360x768 1600x1200 1920x1080

RGB-PC HDMI-PC

For 37/42/47/52LG50, 32/37/42/47/52LG60, 32/42/47/52LG70
Resolution 640x350 720x400 640x480 Horizontal Vertical Frequency(KHz) Frequency(Hz)
Resolution 640x350 720x400 640x480 800x600 1024x768 1280x768 1360x768 1366x768

800x600

31.468 31.469 31.469 37.500 37.861 35.156 37.879 46.875 48.077 48.363 56.476 60.023 47.776 60.289 63.981 79.976 47.712 75.00 66.587 67.5
70.09 70.08 59.94 75.00 72.80 56.25 60.31 75.00 72.18 60.00 70.06 75.02 59.87 74.893 60.02 75.025 60.015 60.00 59.934 60.00 * Only RGB-PC mode

For 42/50PG25, 50/60PG60

Resolution 640x350 720x400 640x480 Horizontal Frequency(KHz) 31.468 31.469 31.469 37.500 37.861 35.156 37.879 46.875 48.077 48.363 56.476 60.023 47.776 60.289 63.981 79.976 47.712 75.00 66.587 Vertical Frequency(Hz) 70.09 70.08 59.94 75.00 72.80 56.25 60.31 75.00 72.18 60.00 70.06 75.02 59.87 74.893 60.02 75.025 60.015 60.00 59.934 * Only RGB-PC mode
1024x768 1280x768 1280x1024 1360x768 1600x1200 1920x1080
MFL34797048-en-4 3/18/08 7:27 PM Page 26

TURNING ON TV

First, connect power cord correctly. At this moment, the TV switches to standby mode. I In standby mode to turn TV on, press the ) button on the TV or press the POWER, , INPUT, (DE or INPUT, CH( or ), Number (0~9 ) button on the remote control. 9 Select the viewing source by using the INPUT button on the remote control. This TV is programmed to remember which power state it was last set to, even if the power cord is out.

When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

CHANNEL SETUP

Auto Scan (Auto Tuning)
Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel list. Run Auto Tuning again after any Antenna/Cable connection changes.

CHANNEL

Auto Tuning Manual Tuning Channel Edit

Move Enter

Press Yes button to begin auto tuning.

Yes No

1 MENU 2 3

Select C H A N N E L.

5RETURN
Return to the previous menu. Return to TV viewing.
Select A u t o T u n i n g.

Select Y e s.

Run A u t o t u n i n g.
A password is required to gain access to Auto Tuning menu if the Lock System is turned on.
MFL34797048-en-4 3/18/08 7:27 PM Page 27

QUICK MENU

Q.Menu (Quick Menu) is a menu of features which users might use frequently.

Plasma TV

Q.Menu
Aspect Ratio Power Saving Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer

LCD TV

16:Off Vivid Standard Off English Off Add Eject
Aspect Ratio Backlight Clear Voice Picture Mode Sound Mode Caption Multi Audio Sleep Timer

1Q. MENU 2 3Q. MENU

Display each menu.
Make appropriate adjustments.
Del/Add/Fav USB Eject Close

Return to TV viewing.

Except 32/37/42LG30
ON-SCREEN MENUS SELECTION
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

PICTURE

1 MENU 2
Display each menu. Select a menu item.

OPTION

Enter to the pop up menu.

4 MENU

CHANNEL PICTURE AUDIO

Move ENTER

All available TV channels are searched and stored automatically. User can do manual channel selection and add or delete individual channels. You can add or delete in the channel list.
MFL34797048-en-4 3/18/08 7:27 PM Page 28
Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint

Aspect Ratio

Select the desired picture format: Set by program, 4:3, 1 6:9, Zoom1, Zoom2, Just Scan.

Picture Mode

Select the Intelligent Sensor (Except 32/37/42LG30, Plasma TV), Vivid, Standard, Cinema/ Cinema (Only for 50/60PG60), Sport, Game, Expert1, Expert2. I Adjust the Backlight (Only LCD TV), Contrast, Brightness, Sharpness, Color, Tint. I Advanced Control: Adjust the Color Temperature, Fresh Contrast, Fresh Color, Noise Rreduction, Gamma, Black Level, Eye Care (Only LCD TV), Real Cinema (For LCD TV) / Film Mode (For Plasma TV), TruMotion (Only 32/37/42/47/52LG60, 32/42/47/52LG70). I Reset: Settings of the selected picture modes return to the default factory settings.

Auto Volume Clear Voice Balance Sound Mode : Standard SRS TruSurround XT: Off Treble Bass Reset

Screen (RGB-PC)

(32/37/42/47/52LG60, 32/42/47/52LG70 Only)
Adjust the screen Resolution, Auto config, Position, Size, Phase, Reset. Use this feature to see the difference TruMotion makes.

TruMotion Demo

Auto Volume Clear Voice Balance

: Off : On 0

Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. By differentiating the human sound range from others, it helps users listen to human voices better. Adjust the left/right sound of speaker. Select the Standard, Music, Cinema, Sport, and Game.

Sound Mode

SRS TruSurround XT, Treble, Bass: Adjust the sound to suit your taste and room situations. I Reset: Settings of the selected Sound Mode return to the default factory settings.

TV Speaker

Turn the TV speaker On or off.
Clock Off Time On Time : Off : Off

: Feb/21/2008 2:10 AM

Sleep Timer : Off Auto Sleep : Off
Auto: The time is set automatically from a digital channel signal. Select your viewing area time zone. Select Auto, Off, On depending on whether or not your viewing area observes Daylight Saving time. I Manual: Set the clock manually.
Off Time On Time Sleep Timer Auto Sleep
Select On or Off. Select On or Off. Select the amount of time before your TV turns off automatically: Off, 10, 20, 30, 60, 90, 120, 1 240. 80, TV will be automatically turned off, in case of no signal for 10 minutes.
MFL34797048-en-4 3/18/08 7:27 PM Page 29
Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID

Language Input Label

: English : On : Off : Off : Normal : Level 0 :1

SIMPLINK key Lock

Caption
ISM Method (Plasma TV only) Power Saving (Plasma TV only) Set ID (Except 32/37/42/47/52LG60) Power Indicator (LCD TV only) LOCK
Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block
Select your desired language for on screen menus : English, Spanish, French. I Set a label to each input source. I Control and play other AV devices connected to the TV through HDMI cable without additional cables and settings. I This feature can be used to prevent unauthorized viewing by locking out the front panel controls. I When selecting Off, Submenus for Analog, DTV, and Digital Option become disabled. I Analog: CC1~ CC4 , Text1~ Text4. I Digital: CC1~ CC4 , Text1~ Text4, Service1~ Service6. I Digital Option: Customize the DTV/CADTV captions that appear on your screen. I Use it to minimize any fixed image on the screen. : Normal, Orbiter, Inversion, White Wash. I Reduces the plasma display power consumption.

Please use only a USB storage device which was formatted as a FAT or NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized. Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. Some USB storage devices may not be supported or operated smoothly. File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English characters. Please backup important files because data on USB device may be damaged. Data management is consumer's responsibility and as a result, the manufacturer does not cover data damage.
MFL34797048-en-4 3/18/08 7:27 PM Page 31
You can view.JPG files from USB storage devices. The On Screen Display on your model may be slightly different.

Screen Components

1 MENU

Select U S B.

Select P H O T O L I S T.

USB Device

Moves to upper level file Preview: Display the thumbnail/folder name of the photo in the selected folder Current page/Total pages Total number of marked photos Usable USB memory Corresponding buttons on the remote control
Page 1/1 TOP FOLDER Drive1 Drive1 No Marked

Free Space 150MB

2Folders, 4Files Upper

Navigate

PopUp Menu

Move Page

RETURN Exit
Photo Selection and Popup Menu
Select the target folder or drive.

TOP FOLDER

Drive1
USB Device Page 1/1 No Marked Free Space 150MB
Select the desired photos.

PopUp Menu CH

Show the Popup menu. Select the desired Popup menu.

Butterfly

1366x768 125KB
View Mark All 1366x768 125KB Upper Navigate Move Page Delete Cancel
Use the C H button to navigation in the photo page. I Use the F A V button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show.
When you select a file (not folder), this PopUp menu is displayed. G V i e w: Display the selected item. G Mark All: Mark all photos on the screen. G U n m a r k A l l: Deselect all marked photos. G D e l e t e: Delete the selected photo item. G C a n c e l: Close the pop-up menu.
MFL34797048-en-4 3/18/08 7:27 PM Page 32

Full Screen Menu

You can change the Photo List view so that it fills the screen. More operations are available in full screen mode.

Drive1 Drive1

Show the Popup menu. Select V i e w.

View Mark All 1366x768 125KB Delete Cancel
The selected photo is displayed in full size.

Upper Navigate Move Page

Select the Sideshow, B G M, D e l e t e, Option, or Hide.

(Rotate),

S i d e s h o w: Selected photos are displayed during the slide show. If no photo is selected, all photos in the current folder are displayed during slide show. I Set the time interval of the slide show in O p t i o n. I A slide show continues for a maximum of 4 hours. After 4 hours, the slide show will end and go to TV mode or external input mode. G B G M: Listen to music while viewing photos in full size. I Set the BGM device and album in O p t i o n. ( R o t a t e ): Rotate photos. G I Rotates the photo 90, 180, 270, 360 clockwise. G D e l e t e: Delete photos. G O p t i o n: Set values for S l i d e S p e e d and M u s i c F o l d e r. I Use button and E N T E R button to set values. Then go to and press E N T E R to save the settings. I You cannot change M u s i c F o l d e r while BGM is playing. G H i d e : Hide the menu on the full-sized screen. I To see the menu again on the full-sized screen, press E N T E R button to display.
1/17 Sideshow BGM Delete Option Hide
The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.
Press F G to set the time interval between slides. Slide Speed Music Folder ENTER Fast. Cancel
This TV will not be able to decode most JPG images saved using the Progressive option.
MFL34797048-en-4 3/18/08 7:27 PM Page 33
You can use the Music List menu to play MP3 files form a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different.
Supported music file: *.MP3 Bit rate range 40Kbps ~ 320Kbps Sampling rate (Sampling Frequency) MPEG1 : 32000, 44100, 48000Hz MPEG2 : 16000, 24000, 22050Hz MPEG2.5 : 16 ~ 48KHz
Select M U S I C L I S T.
Moves to upper level file Preview: If any album jacket for the file exists, this jacket is displayed. Current page/Total pages Total number of marked musics Usable USB memory Corresponding buttons on the remote control
Page 1/1 Drive1 Arirang Upper Arirang Good Bye 04:12 05:30 No Marked Title
Free Space 150MB Play Time

3945 KB, 128 Kbps

MFL34797048-en-4 3/18/08 7:27 PM Page 34
Music Selection and Popup Menu
Up to 6 music titles are listed per page.

Arirang

USB Device Page 1/1 No Marked
Title Upper Arirang Good Bye 04:12 05:30

Play Time

Select the desired musics.

show the PopUp menu.

Page 1/1 No Marked

Title Upper Arirang

USB Device Free Space 150MB

4 5RETURN

The video function does not work. Check whether the product is turned on. Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet? I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in.

No picture &No sound

Picture appears slowly after switching on
This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes.
No or poor color or poor picture
Adjust Color in menu option. Keep a sufficient distance between the product and the VCR. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly? I Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station. I Check for sources of possible interference.
Check antenna (Change the direction of the antenna). Check HDMI cable over version 1.3. The HDMI cables dont support HDMI version 1.3, it cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.
No picture when connecting HDMI
MFL34797048-en-4 3/18/08 7:27 PM Page 36
The audio function does not work. Press the VOL or VOLUME button. Sound muted? Press MUTE button. I Try another channel. The problem may be with the broadcast. I Are the audio cables installed properly?
Picture OK & No sound
No output from one of the speakers Unusual sound from inside the product No sound when connecting HDMI or USB
Adjust Balance in menu option. A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.

Power requirement Television System Program Coverage External Antenna Impedance Operating Temperature Operating Humidity Storage Temperature Storage Humidity
AC100-240V ~ 50/60Hz NTSC-M, ATSC, 64 & 256 QAM VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-ohm 32 ~ 104F (0 ~ 40C) Less than 80% -4 ~ 140F (-20 ~ 60C) Less than 85%

Environment condition

The specifications shown above may be changed without prior notice for quality improvement.
MFL34797048-en-4 3/18/08 7:27 PM Page 38
MODELS Dimensions (Width x Height x Depth) With stand Without stand 32LG60 (32LG60-UA) 31.7 x 24.6 x 13.1 inches 805.6 x 626.0 x 333.0mm 31.7 x 23.1 x 3.7 inches 805.6 x 587 x 96.2 mm.4 31.7 pounds / 14.4 kg 26.8 pounds / 12.2 kg 47LG60 (47LG60-UA) 45.3 x 34.1 x 17.1 inches 1 152.8 x 868.6 x 434.5 mm 45.3 x 32.3 x 3.1 inches 1 152.8 x 820.8 x 79.0 mm 71.8 pounds / 32.6 kg 59.3 pounds / 26.9 kg 32LG70 (32LG70-UA) 31.3 x 23.5 x 8.9 inches 797 x 597 x 227 mm.0.0.3 31.3 x 21.9 x 3.9 inches 797 x 558.6 x 100.5 mm.0 28.4 pounds / 12.9 kg 25.1 pounds / 1 kg 1.4 47LG70 (47LG70-UA) 44.8 x 32.2 x 13.5 inches 1 140.4 x 820.1 x 342.9 mm 44.8 x 30.1 x 5.0 inches 1 140.4 x 764.8 x 129.0 mm 66.3 pounds / 30.1 kg 55.9 pounds / 25.4 kg 37LG60 (37LG60-UA) 36.5 x 27 x 14.7 inches.8 929.0 x 706.9 x 374.7 mm 36.5 x26.1 x 3.8 inches 929.0 x 665.0 x 98.7 mm 46.7 pounds / 21.2 kg 39.9 pounds / 18.1 kg 42LG60 (42LG60-UA) 40.8 x 31.3 x 14.9 inches 1.8 x 796.4 x 379.5 mm 037 40.8 x 29.4 x 3.1 inches 1.8 x 747 x 80.8 mm 037.0 53.1 pounds / 24.1 kg 44.9 pounds / 20.4 kg 52LG60 (52LG60-UA) 50.3 x 37.1 x 16.9 inches 1280.1 x 944.7 x 430.0 mm 50.3 x 35.2 x 3.5 inches 1280.1 x 896.0 x 89.0 mm 99.2 pounds / 45.0 kg 83.9 pounds / 38.1 kg 42LG70 (42LG70-UA) 40.4 x 28.8 x 1 inches 1.5 1026.2 x 734.0 x 293.4 mm 40.4 x 27 x 4.4 inches.0 1026.2 x 687 x 1 1.8 mm.49.3 pounds / 22.4 kg 43.4 pounds / 19.7 kg 52LG70 (52LG70-UA) 50.5 x 35.3 x 13.5 inches 1284.4 x 898.6 x 342.9 mm 50.5 x 33.2 x 5.0 inches 1284.4 x 844.6 x 129.5 mm 87 pounds / 39.9 kg.pounds / 35.2 kg.6
MFL34797048-en-4 3/18/08 7:27 PM Page 39
MODLES Dimensions (Width x Height x Depth) With stand Without stand
42PG25 (42PG60-UA) 41.1 x 28.9 x 12.1 inches 1044.4 x 735.4 x 308.0 mm 41.1 x 26.7 x 3.1 inches 1044.4 x 680.6 x 79.6 mm 61.7 pounds / 28.0 kg 55.1 pounds / 25.0 kg 50PG60 (50PG60F-UA) 48.6 x 33.4 x 14.3 inches 1235.6 x 849.3 x 364.1 mm 48.6 x 31.2 x 3.1 inches 1235.6 x 792.8 x 79.6 mm 100.7 pounds / 45.7 kg 91.9 pounds / 41.7 kg