Ofrecido por www.electromanuales.com
Users Guide Specification

1. Model Description

MODEL SUFFIX
19/22LS4D-ZD, 19/22/26/32/37/42LG3000-ZA, 32/37/42/47/52LG5000-ZA

SHIN HJ 08.10.17

KIM JO 08.10.17

LG Part No.

Product Name
19/22LS4D*, 19/22/26/32/37/42LG 30**, 32/37/42/47/52LG50**

MFL34441652 (0810-REV00)

Printing Specification
1. Trim Size (Format) : 185 mm x 260 mm 2. Printing Colors : 1 Color (BLACK) 3. Stock (Paper) : Uncoated paper, 60 g/ 4. Printing Method : Off-set 5. Bindery : Saddle stitch 6. Language : EN (1) 7. Number of pages : 20 pages

N O T E S

This part contain Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level, Details should be followed Eco-SCM management standard[LG(56)-A-2524]. Especially, Part should be followed and controlled the following specification. (1)Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production. (2) Especially, Dont use or contain lead(Pb) and cadmium(Cd) in ink.

Special Instructions

(1) Origin Notification
* LGEIN : Printed in Indonesia * LGEWA : Printed in U.K. * LGESP : Printed in Brazil * LGEMX : Printed in Mexico * LGEND : Printed in China * LGEIL : Printed in India * Other Oversea Factories : NON * LGEMA : Printed in Poland

REV. NO.

Changes

MM/DD/YY

SIGNATURE

CHANGE NO.

CHANGE

CONTENTS

Pagination sheet

Front Cover

P/NO. MFL34441652 Total pages : 20 pages

(UK only)

LCD TV OWNERS MANUAL
LCD TV MODELS L S 4 D* L G 3 0* * L S 4 D* L G 3 0* * L G 2 0* * L G 3 0* * L G 2 0* * L G 5* * * L G 2 0* * L G 5 0* * L G 3 0* * L G 5 0* * L G 3 0* * L G 5 0* * L G 3 0* * L G 5 0* * Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
5507: 19LS4D-ZD 5721: 26LG3050-ZA 5631: 42LG2000-ZA 5090: 22LG3000-ZA 5089: 32LG3000-ZA 5086: 42LG3000-ZA 5084: 37LG5000-ZA 5082: 47LG5000-ZA 5385: 52LG5010-ZD 5387: 42LG5010-ZD 5389: 32LG5010-ZD 5391: 47LG5020-ZB 5393: 37LG5020-ZB 5395: 52LG5030-ZE 5397: 42LG5030-ZE 5399: 32LG5030-ZE 5820: 19LG3050-ZA 5879: 19LG3060-ZB 5878: 32LG5600-ZB
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 5499: 22LS4D-ZD 5629: 32LG2000-ZA 5630: 37LG2000-ZA 5088: 19LG3000-ZA 5080: 26LG3000-ZA 5087: 37LG3000-ZA 5085: 32LG5000-ZA 5083: 42LG5000-ZA 5081: 52LG5000-ZA 5386: 47LG5010-ZD 5388: 37LG5010-ZD 5390: 52LG5020-ZB 5392: 42LG5020-ZB 5394: 32LG5020-ZB 5396: 47LG5030-ZE 5398: 37LG5030-ZE 5671: 32LG5700-ZF 5818: 22LG3050-ZA 5880: 22LG3060-ZB
Extended Owners Manual that contains advanced features of these LG TV-sets is located on CD-ROM in electronic version. To read it You need to open chosen files by using Personal Computer (PC) equipped with CD-ROM drive.
P/NO: MFL34441652 (0810-REV00) Printed in Korea

CONNECTING YOUR UNIT

Image shown may differ from your TV.

DVD/STB

COMPONENT IN

VIDEO AUDIO

VCR Connection

Power Cord

USB IN SERVICE ONLY
AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT

HDMI/DVI IN 2

RGB IN (PC)
1(DVI) RS-232C IN (CONTROL & SERVICE)
* To connect an additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section in CD Manual.

ANTENNA IN

Antenna Connection

ENGLISH

HDMI/DVI IN AUDIO IN (RGB/DVI) ANTENNA IN PCMCIA CARD SLOT EJECT
RS-232C IN (CONTROL & SERVICE)

RGB (PC) IN

COMPONENT IN VIDEO AUDIO

SERVICE ONLY

SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product. In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.
WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged.
Precaution in Installing the Product

WARNING

Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.

CAUTION

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
Precautions in Moving the Product
Do not use the product in damp place such as a bathroom or any place where it is likely to get wet.
- This may cause a fire or could give an electric shock.
Make sure to turn off the product. Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
Do not shock the product when moving it.
Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
Make the panel face forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center for repair.
Precautions in Using the Product
Do not disassemble, repair or modify the product at your own discretion.
- Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product in a built-in installation such as bookcase or rack.

- Ventilation required.

Electrical Power Related Precautions
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not keep a still image on the screen for an extended period (e.g. by pausing a video) as the fixed image may remian visible on the screen. This is known as image burn. Image burn is not covered under the manufacturers warranty.

Do not touch the power plug with wet hands. Additionally, it the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
During a thunder or lightning storm, unplug the power cable or signal cable.
- You may be electrocuted or a fire can break out.

PREPARATION

FRONT PANEL CONTROLS
Image shown may differ from your TV. If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.
LCD TV Models : 32/37/42LG20**, 26/32/37/42LG30**, 32/37/42/47/52LG5***

PROGRAMME

VOLUME
Intelligent Sensor Adjusts picture according to the surrounding conditions. (32/37/42/47/52LG5*** only) POWER Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates blue when the TV is switched on. Note: You can adjust Power Indicator
LCD TV Models : 19/22LG30**
INPUT MENU OK VOLUME PROGRAMME

in the OPTION menu.

INPUT MENU OK
LCD TV Models : 19/22LS4D*
POWER INPUT MENU OK VOLUME PROGRAMME
Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates green when the TV is switched on.

BACK PANEL INFORMATION

PCMCIA CARD SLOT

HDMI IN 3

HDMI/DVI IN

AUDIO IN (RGB/DVI)

PCMCIS CARD SLOT

VIDEO L/MONO AUDIO R

1(DVI)
Except for 32/37/42LG20**

S-VIDEO

AV IN 3

AV IN 3 H/P

Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. RGB/DVI Audio Input Connect the audio from a PC or DTV.
Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) Audio/Video Input (Except for 19/22LS4D*) Connect audio/video output from an external device to these jacks. S-VIDEO (Except for 19/22LS4D*, 32/37/42LG20**) Connect S-Video out from an S-VIDEO device. Headphone Socket (Except for 19/22LS4D*, 32/37/42LG20**) Connect the headphone plug to this socket. SERVICE ONLY PORT
DIGITAL AUDIO OUT OPTICAL (Except for 19/22LS4D*) Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. HDMI Input Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. RGB IN (PC) Connect the output from a PC. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.

STAND INSTALLATION

(LCD TV Models: 32/37/42LG20**, 26/32/37/42LG30**, 32/37/42LG5***)

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Assemble the TV as shown.
Assemble the parts of the S t a n d B o d y with the C o v e r B a s e of the TV.
Fix the 4 bolts securely using the holes in the back of the TV.

Stand Body

Cover Base

(Only 19/22LG30**)

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. Insert the S T A N D B O D Y into a C O V E R B A S E until clicking sound. Assemble the TV as shown.

DETACHING STAND

(Only 19/22LS4D*)
Image shown may differ from your TV. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Place the tv with its front facing downward on a cushion or soft cloth.
Hold the H i n g e B o d y and bend it upward.

Hinge Body

Pull the C o v e r B a s e backward during pressing a button on the S t a n d B o d y.
Insert the S t a n d B o d y into the TV until clicking sound.
Hold the C o v e r B a s e and pull with shake it backward to separate from the S t a n d B o d y.
Hold the S t a n d B o d y and bend it upward.
Pull stand body to separate from the TV during pressing 2 latches.
BACK COVER FOR WIRE ARRANGEMENT
LCD TV Models: 32/37/42LG20**, 26/32/37/ 42LG30**, 32/37/42/47/52LG5***
LCD TV Models : 19/22LS4D*, 19/22LG30**
Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section of the manual. Open the C A B L E M A N A G E M E N T C L I P as shown and manage the cables.
Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section.

CABLE MANAGEMENT CLIP

Install the CABLE MANAGEMENT CLIP as shown.
Fit the C A B L E M A N A G E M E N T C L I P as shown.
How to remove the cable management clip
First, press the cable management. Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward. Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward.

! NOTE

G Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER.
You should purchase necessary components to fix the TV to the wall on the market. Position the TV close to the wall to avoid the possibility of it falling when pushed. The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen these bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV.
When moving the TV undo the cords first. Use a platform or cabinet strong and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally.

EARTHING

Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit breaker
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4 (10cm) all around the TV.

4 inches

Attaching the TV to a desk (Only 32/37/42LG20**, 26/32/37/42LG30**, 32/37/42LG5***)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. Stand
1-Screw (provided as parts of the product)

! WARNING

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4 (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall.

4 inches 4 inches 4 inches 4 inches
Not using the desk-type stand (Except for 19/22LS4D*)
When installing the wall-mounted unit, use the protection cover for desk-type stand installation. Insert the P R O T E C T I O N C O V E R into the TV until clicking sound.
To prevent damage do not connect to the mains outlet until all connections are made between the devices.

ANTENNA CONNECTION

For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied.

Wall Antenna Socket

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

HDMI IN RGB IN

VARIABLE AUDIO OUT

RF Coaxial Wire (75 ohm)

Outdoor Antenna (VHF, UHF)
Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

Antenna

Signal Amplifier
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above. If signal needs to be split for two TVs,use an antenna signal splitter for connection.
WATCHING TV /PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.

TV D/A POWER INPUT

TV/RADIO TEXT I/II MUTE

7 LIST

9 Q.VIEW

AV MODE

INFO i

VOL EXIT RETURN

INPUT External input mode rotate in regular sequence. Switches the TV on from standby. GUIDE Shows programme schedule. THUMBSTICK(Up/Down/LeftRight) Allows you to navigate the on-screen menus and adjust the system settings to your preference. OK Accepts your selection or displays the current mode. Programme UP/DOWN Selects a programme. Q.VIEW Returns to the previously viewed programme.
MODE Selects the remote operating modes. Q. MENU Select the desired quick menu source. MENU Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu. VOLUME UP /DOWN Adjusts the volume. POWER Switches the TV on from standby or off to standby.

Installing Batteries

Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones. Close cover.

TURNING ON THE TV

- When your TV is turned on, you will be able to use its features.
Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. (or PR D E) button on the TV or In standby mode to turn TV on, press the r / I, INPUT or P press the POWER, INPUT, D/A, P (or PR + -) or NUMBER button on the remote control and the TV will switch on.

Initializing setup

If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Select Mode, Country, Time Zone, Auto programme tuning.

Note: a. It will automatically disappear after approx. 40 seconds unless a button is pressed. b. Press the BACK or RETURN button to change the current OSD to the previous OSD. c. For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. d. "Home mode is the optimal setting for home environments, and is the TV's default mode. e. "In Store" mode is the optimal setting for store environments. If a user modifies image quality data, In Store mode initializes the product to the image quality set by us after a certain period of time. f. The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
Select your desired language.

Select your country.

* If you want to change Language/ Country selection
Select O P T I O N. Select M e n u L a n g u a g e or C o u n t r y.
Select your desired language or country. Save it.

G G G G G

If you do not finish the set-up Installation Guide by pressing RETURN or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. The CI (Common Interface) function may not be applied based on country broadcasting circumstances. DTV mode control buttons may not function based on country broadcasting circumstances. In country that Digital broadcasting regulation isnt fixed, some DTV function may not work depending on digital broadcasting circumstances. The Country Setting UK should only be activated UK.
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. SETUP

Move OK

Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information

PICTURE

Aspect Ratio Picture Mode : 16:9 : Vivid Backlight Contrast Brightness Sharpness Colour Tint
Auto Volume Balance Sound Mode : Off 0 : Standard 120Hz 200Hz 500Hz 1.2KHz 3KHz

OPTION

+ + + + +
Clock Off Time On Time Sleep Timer Auto Sleep Time Zone
Menu Language Audio Language Subtitle Language Hard of Hearing( Country Input Label SIMPLINK Key Lock
: Off : Off : Off : Off : Canary GMT
: English : English : English ) Off :UK : Off : Off
Lock System : Off Set Password Block Programme Parental Guidance : Off

1MENU 2

Display each menu.

Select a menu item.

Move to the pop up menu. Press the MENU button to return to normal TV viewing. Press the RETURN button to move to the previous menu screen.

AUTO PROGRAMME TUNING

Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted.
Auto tuning Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information
All service-information will be updated. Continue? Yes

SECAM L Search

Select SETUP.
Use NUMBER buttons to input a 4-digit
password in Lock System On.
If you wish to keep on auto tuning select YES

Select Auto Tuning.

using the button. Then, press the OK button. Otherwise select NO.

Select Yes.

Run Auto tuning.
Press the MENU button to return to normal TV viewing. Press the RETURN button to move to the previous menu screen.

APPENDIX

MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Do not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges.
TO VIEW THE USER'S GUIDE ON THE CD-ROM
To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader. If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG" Open the folder "ACRORD" double-click your language. To view the User's guide The User's guide files are included in the supplied CD-ROM. Load the supplied CD-ROM into the CD-ROM drive of your PC. After a while, the web page of the CD-ROM will open automatically.(Windows users only) If the web page does not appear automatically, open the User's guide file directly. Open "My computer" Open the folder "LG" Double click the "index.htm" file.

TROUBLESHOOTING

The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
The remote control does not work
Power is suddenly turned off
Is the sleep timer set? Check the power control settings. Has the Power supply been interrupted. A Is Auto sleep activated on this station?
The video function does not work.

No picture &No sound

Check whether the TV is switched on. Try another channel. The problem may be with the broadcast. A Is the power cord inserted correctly into the mains? A Check your antenna direction and/or location. A Test the mains outlet by plugging another TV into the same outlet.
Picture appears slowly after switching on
This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.
No or poor colour or poor picture
Adjust Colour in menu option. Allow a sufficient distance between the TV and the VCR. A Try another channel. The problem may be with the broadcast. A Are the video cables installed properly? A Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures No picture when connecting HDMI
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station. Station signal is weak, reposition the antenna to receive weaker stations. A Check for sources of possible interference.
Check antenna (Change the position of the antenna). Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.
The audio function does not work.
Picture OK & No sound
Press the VOLUME button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? Adjust Balance in menu option. A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV. Check HDMI cable over version 1.3. Check USB cable over version 2.0.

No output from one of the speakers Unusual sound from inside the TV No sound when connecting HDMI or USB
*This feature is not available for all models.
There is a problem with PICTURE settings. When the user changes the picture settings, the TV automatically converts back to the initial settings after a certain period of time.
It means that the TV is currently set to I n S t o r e mode. To switch to H o m e mode you should do the followings: From the TV Menu, choose O P T I O N -> F a c t o r y R e s e t -> Y e s (wait for a W few seconds for the TV to download again) -> OSD "W E L C O M E" appears -> Press O K button -> Choose L a n g u a g e -> Choose H o m e -> Select your C o u n t r y and T i m e Z o n e -> Press O K button. Program search will begin automatically (You can stop the search by pressing the O K button). Now, you have completed switching to the H o m e mode.

WEIGHT

19LS4D* MODELS 19LS4D-ZD 22LS4D-ZD 22LS4D* 19LG30** 19LG3000-ZA 19LG3050-ZA 19LG3060-ZB
5.02 kg / 1 lbs 1.1 4.76 kg / 10.5 lbs

Weight

with stand without stand
5.1 kg / 1 lbs 1.3 4.6 kg / 10.2 lbs
6.1 kg / 1 lbs 3.5 5.7 kg / 1 lbs 2.6
22LG30** MODELS 22LG3000-ZA 22LG3050-ZA 22LG3060-ZB
5.6 kg / 1 lbs 2.4 5.34 kg / 1 lbs 1.8
26LG30** 26LG3000-ZA 26LG3050-ZA
10.1 kg / 22.3 lbs 8.6 kg / 19.0 lbs
32LG30** 32LG3000-ZA 32LG3030-ZA
1 kg / 29.6 lbs 3.kg / 26.3 lbs 1.9
37LG30** MODELS 37LG3000-ZA 37LG3030-ZA
1 kg / 41.5 lbs 8.kg / 35.7 lbs 6.2
42LG30** 42LG3000-ZA 42LG3030-ZA
23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs

32LG20** 32LG2000-ZA

37LG20** MODELS 37LG2000-ZA

42LG20** 42LG2000-ZA

32LG5*** 32LG5000-ZA 32LG5010-ZD 32LG5020-ZB 32LG5030-ZE 32LG5600-ZB 32LG5700-ZF
1 kg / 31.1 lbs 4.kg / 27 lbs 2.6.8
37LG50** MODELS 37LG5000-ZA 37LG5010-ZD 37LG5020-ZB 37LG5030-ZE
1 kg / 40.4 lbs 8.kg / 34.4 lbs 5.6
42LG50** 42LG5000-ZA 42LG5010-ZD 42LG5020-ZB 42LG5030-ZE
26.2 kg / 57 lbs.8 23.5 kg / 51.8 lbs
47LG50** 47LG5000-ZA 47LG5010-ZD 47LG5020-ZB 47LG5030-ZE
29.2 kg / 64.4 lbs 24.6 kg / 54.3 lbs
52LG50** 52LG5000-ZA 52LG5010-ZD 52LG5020-ZB 52LG5030-ZE
39.5 kg / 87 lbs.1 34.9 kg / 77 lbs.0
The specifications shown above may be changed without prior notice for quality improvement.

ENGLISH

LCD TV PLASMA TV OWNERS MANUAL
LCD TV MODELS L G 3 0* * L S 4 D* L S 4 D* L G 5 0* * L G 3 0* * L G 5 0* * L G 3 0* * L G 5 0* * L G 3 0* * L G 5 0* * L G 3 0* * L G 5 0* * L G 3 0* * PLASMA TV MODELS P G 1 0* * P G 1 0* * P G 2 0* * P G 2 0* * P G 3 0* * P G 3 0* * P G 3 0* *
Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 5499: 22LS4D-ZD 5107: 42PG1000-ZA 5107: 42PG2000-ZA 5109: 42PG3000-ZA 5498: 60PG3000-ZA 5088: 19LG3000-ZA 5080: 26LG3000-ZA 5087: 37LG3000-ZA 5085: 32LG5000-ZA 5083: 42LG5000-ZA 5081: 52LG5000-ZA 5386: 47LG5010-ZD 5388: 37LG5010-ZD 5390: 52LG5020-ZB 5392: 42LG5020-ZB 5394: 32LG5020-ZB 5396: 47LG5030-ZE 5398: 37LG5030-ZE 5507: 19LS4D-ZD 5106: 50PG1000-ZA 5106: 50PG2000-ZA 5108: 50PG3000-ZA 5090: 22LG3000-ZA 5089: 32LG3000-ZA 5086: 42LG3000-ZA 5084: 37LG5000-ZA 5082: 47LG5000-ZA 5385: 52LG5010-ZD 5387: 42LG5010-ZD 5389: 32LG5010-ZD 5391: 47LG5020-ZB 5393: 37LG5020-ZB 5395: 52LG5030-ZE 5397: 42LG5030-ZE 5399: 32LG5030-ZE
This feature is not available for all models.

(Except for 19/22LS4D*)

ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. Image shown may differ from your TV.
TV D/A TV /RAD IO TE XT PO W ER IN PU T MU TE

Q.VIE W

IN FO i

RA TIO

Owner's Manual

VO L RAT

Owners manual

E RE XIT TU RN

GU IDE
IO SLE EP TIM E HO LD RE VE AL

IND EX

UPDA TE

Owners Manual

Batteries

Remote Control

Polishing Cloth

Power Cord

Polishing cloth for use on the screen.

Protection Cover

Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Do not use excessive force. This may cause scratching or discolouration.

PLASMA TV models

Bolts for stand assembly (Refer to p.1 1) (Only 42PG10**, 42PG20**, 42PG30**)
Cable Holder (42PG10**, 42PG20**, 42PG30**: 1EA, 50PG10**, 50PG20**, 50/60PG30**: 2EA)
Cable management clip (Only 42/50PG10**)
Cable management clip (Only 42/50PG20**, 42/50/60PG30**)

LCD TV models

x4 Cable management clip (Only 19/22LG30**)
Bolts for stand assembly (Refer to p.10) (Only 32/37/42LG50**, 26/32/37/42LG30**)
1-screw for stand fixing (Refer to p.5) (Only 26/32/42LG30**, 32/42LG50**)
Cable management clip (Only 19/22LS4D*)

CONTENTS

PREPARATION
Front Panel Controls. 4 Back Panel Information. 7 Stand Installation. 10 Detaching Stand. 13 Please set it up carefully so the product does not fall over. 14 Back Cover for Wire Arrangement. 15 Positioning Your Display. Location. Kensington Security System. Desktop Pedestal Installation. 19 Wall Mount: Horizontal Installation. 19 Antenna Connection. 20

RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) SERVICE ONLY PORT Audio/Video Input (Except for 42/50PG10**) Connect audio/video output from an external device to these jacks. S-Video Input (Except for 42/50PG10**) Connect S-Video out from an S-VIDEO device.

PCMCIA CARD SLOT

LCD TV Models: 19/22/26/32/37/42LG30** 32/37/42/47/52LG50**

HDMI IN 3

PCMCIS CARD SLOT
DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks.

COMPONENT IN

USB IN SERVICE ONLY
AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT

HDMI/DVI IN 2

RGB IN (PC)
1(DVI) RS-232C IN (CONTROL & SERVICE)

ANTENNA IN

Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. RGB/DVI Audio Input Connect the audio from a PC or DTV.
Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) Audio/Video Input Connect audio/video output from an external device to these jacks. S-Video Input Connect S-Video out from an S-VIDEO device. Headphone Socket Connect the headphone plug to this socket. SERVICE ONLY PORT
HDMI Input Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
RGB Input Connect the output from a PC. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.

AUDIO IN (RGB/DVI)

RS-232C IN (CONTROL & SERVICE)

RGB (PC) IN

COMPONENT IN VIDEO AUDIO
Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. RGB/DVI Audio Input Connect the audio from a PC or DTV. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.)
Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. Component Input Connect a component video/audio device to these jacks. RGB Input Connect the output from a PC. SERVICE ONLY PORT

STAND INSTALLATION

(LCD TV Models: 26/32/37/42LG30**, 32/37/42LG50**)
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Assemble the TV as shown.
Assemble the parts of the S t a n d B o d y with the C o v e r B a s e of the TV.
Fix the 4 bolts securely using the holes in the back of the TV.

Stand Body

Cover Base

(Only 19/22LG30**)

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. Insert the S T A N D B O D Y into a C O V E R B A S E until clicking sound. Assemble the TV as shown.
(Only 42PG10**, 42PG20**, 42PG30**)
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV.
STAND INSTALLATION (Only 19/22LS4D*)
Image shown may differ from your TV. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Insert the S t a n d B o d y into the TV until clicking sound.
Hold the H i n g e B o d y and bend it upward.

Hinge Body

Swivel Stand
(Except for 19/22LS4D*, 50PG10**)
After installing the TV, you can adjust the TV manually to the left or right direction by 20 degrees to suit your viewing position.
DETACHING STAND (Only 19/22LS4D*)
Image shown may differ from your TV. Place the tv with its front facing downward on a cushion or soft cloth.
Hold the S t a n d B o d y and bend it upward.
Pull the C o v e r B a s e backward during pressing a button on the S t a n d B o d y.
Pull stand body to separate from the TV during pressing 2 latches.

Connecting with a component cable

EXTERNAL EQIPMENT SETUP

Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O jacks on the TV. Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O jacks on the TV.
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select C o m p o n e n t input source using the I N P U T button on the remote control. Signal Component Yes Yes Yes Yes

(50/60Hz)

HDMI No Yes Yes Yes
480i/576i 480p/576p 720p/1080i 1080p
Connecting a set-top box with an HDMI cable
Connect the HDMI output of the digital set-top box to the H D M I / D V I I N, H D M I / D V I I N 1, H D M I I N 2 or H D M I I N 3 jack on the TV. Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select HDMI/DVI, HDMI1, HDMI2 or HDMI3 input source using the I N P U T button on the remote control.
Connecting with a HDMI to DVI cable
Connect the digital set-top box to H D M I / D V I I N, H D M I / D V I I N 1 ( D V I ) or H D M I / D V I I N 1 jack on the TV. Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the TV.
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select HDMI/DVI or HDMI 1 input source using the I N P U T button on the remote control.

DVI-PC OUTPUT

DIGITAL AUDIO OUT SETUP
- Sending the TVs audio signal to external audio equipment via the Digital Audio Output (Optical) port.
Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.

DVI IN

Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu. (G p.80) Refer to the external audio equipment instruction manual for operation.

CAUTION

not look into the optical output port. Looking at the laser beam may damage your vision.

DVD SETUP

When connecting with a component cable
Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the TV. Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the TV. Turn on the DVD player, insert a DVD. Select C o m p o n e n t input source using the I N P U T button on the remote control.

Connect the DVI output of the PC to the H D M I / D V I I N, H D M I / D V I I N 1 ( D V I ) or H D M I / D V I I N 1 jack on the TV. Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. Turn on the PC and the TV. Select HDMI/DVI or HDMI 1 input source using the I N P U T button on the remote control.
enjoy vivid picture and sound, connect a PC to the TV. G Avoid keeping a fixed image on the TVs screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the TV; change the resolution. G There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. synchronization input waveform for G The Horizontal and Vertical frequencies are separate. G Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.

G Connect

the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). G If using a sound card, adjust PC sound as required. G This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV. G DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionality. G If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV. G If the graphic card on the PC does output analogue and digital RGB simultaneously, switch the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.) G DOS mode may not work depending on the video card if you use a HDMI to DVI cable. G If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.

Supported Display Resolution (Only 19/22LS4D*)

RGB[PC], HDMI[PC] mode

Resolution 720x400 640x480 800x600 832x624 1024x768 1280x768 1360x768 1366x768 1280x1024 1440x900 1400x1050 1680x1050 Horizontal Frequency(kHz) 31.468 31.469 37.684 37.879 46.875 49.725 48.363 56.470 60.123 47.78 47.72 47.56 63.595 55.5 64.744 65.16 Vertical Frequency(Hz) 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.029 59.87 59.8 59.6 60.0 59.90 59.948 59.94

HDMI[DTV] mode

Resolution 720x480 720x576 1280x720 Horizontal Frequency(kHz) 31.469 31.5 31.25 37.500 44.33.72 33.75 28.125 26.33.716 33.75 56.250 67.43 67.5 Vertical Frequency(Hz) 59.59.59.50.00 23.29.976 30.59.94 60

1920x1080

Only 19LS4D* Only 22LS4D*
Supported Display Resolution
(Only 19/22/26/32/37/42LG30**, 32/37/42/47/52LG50**)
Resolution 720x400 640x480 800x600 832x624 1024x768 1280x768 1360x768 1366x768 1440x900 1400x1050 1680x1050 1280x1024 1920x1080 Horizontal Frequency(kHz) 31.468 31.469 37.684 37.879 46.875 49.725 48.363 56.470 60.123 47.78 47.72 47.56 55.5 64.744 65.16 63.595 66.647 Vertical Frequency(Hz) 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.029 59.87 59.8 59.6 59.90 59.948 59.94 60.0 59.988
Resolution 720x480 720x576 1280x720 Horizontal Frequency(kHz) Vertical Frequency(Hz)
31.469 / 31.5 59.94 / 60 31.37.44.96 / 45 59.94 / 60 33.72 / 33.75 59.94 / 60 28.125 50.00 26.97 / 27 23.97 / 24 33.716 / 33.75 26.976 / 30.00 56.67 / 67.43.5 59.94 / 60
Only 19LG30** Only 22LG30** Only 19LG30**, 37/42/47/52LG50** Only 37/42/47/52LG50**
Supported Display Resolution (Only 42/50PG10**, 42/50PG20**, 42/50/60PG30**)
Resolution 720x400 640x480 800x600 1024x768 1280x768 1360x768 1920x1080 Horizontal Frequency(kHz) 31.468 31.469 37.879 48.363 47.78 47.72 66.647 Vertical Frequency(Hz) 70.08 59.94 60.31 60.00 59.87 59.80 59.988
Resolution 640x480 720x480 720x576 1280x720 Horizontal Frequency(kHz) 31.469 31.469 31.47 31.50 31.25 37.50 44.96 45.00 28.125 33.72 33.75 27.000 33.75 56.25 67.433 67.50 Vertical Frequency(Hz) 59.94 60.00 59.94 60.00 50.00 50.00 59.94 60.00 50.00 59.94 60.00 24.50.00 59.94 60

Screen Setup for PC mode

Screen Reset
Returns to the default settings Position, Size and Phase at the factory. This function works in the following mode : RGB[PC].

PICTURE

SCREEN
Resolution Auto Config. Position Size Phase Reset

RETURN Prev.

Contrast : 70 Brightness : 50 Sharpness : 50 Colour : 50 Tint :0 Advanced Control Picture Reset Screen

To Set

YELLOW

Turn the moved programme number to YELLOW.
Release the moved programme.
Selecting a Favourite Programme
The selected programme will be added to the
favourite programme list.
BOOSTER (IN DIGITAL MODE ONLY)
If reception is poor, selectBooster to On. When the signal is strong, select Off.
Auto tuning Manual tuning Programme Edit Booster :: On Booster On Software Update : Off Diagnostics CI Information

Off On On

Select Booster.

Select On or Off.

SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
Auto tuning Manual tuning Programme Edit Booster : On Software Update :: Off Software Update Off Diagnostics CI Information

Off Off On

Select Software Update.
Select On or Off. If you select On, a user confirm message box will be displayed to notify that new software is found. Save.
* When setting Software Update
Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen. Select the Y E S using the button and you will see the following picture. After the Software Update is complete, the System restarts.
When the Software Update O menu is "O f f", the message to O change it to "O n" appears.
When the power is turned off, downloading starts. When the power is turned on while updating, the progress status is displayed.
- During Progress of a Software Update, please note the following: Power to the TV must not be interrupted. The TV must not be switched off. The antenna must not be disconnected. After Software Update, you can confirm the updated software version in Diagnostics menu.
DIAGNOSTICS (IN DIGITAL MODE ONLY)
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned MUX. This displays the signal information and service name of the selected MUX.

Engineering Diagnostics

Manufacturer Model/Type Serial No. Software Version CH 30 CH 34 CH 36 CH 38 CH 54 CH 60
Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics Diagnostics CI Information
: LG Electronics Inc. : 22LS4D : 708KGKG00019 : V1.18.1

MENU Exit

Select Diagnostics.
Display Manufacturer, Model/Type, Serial Number and Software Version.
Display the information of Channel.
CI [COMMON INTERFACE] INFORMATION
This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output. This may be incompatible with the CI module and smart card. CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances.

Viaccess Module

Consultations Authorizations Module information
Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information CI Information

Select the item

This OSD is only for illustration and the menu options and screen format will vary according to the Digital pay services provider. It is possible for you to change CI (Common Interface) menu screen and service by consulting your dealer.

Select CI Information.

Select the desired item: Module information, smart card information, language, or software download etc. Save.
SELECTING THE PROGRAMME TABLE
You can check which programmes are stored in the memory by displaying the programme table.
Displayed when the Locked Programme.
Displaying programme LIST
You may find some blue programmes. These
display the PROGRAMME LIST.
have been set up to be skipped by auto programming or in the programme edit mode. Some programmes with the channel number shown in the programme LIST indicate there is no station name assigned.
Selecting a programme in the programme list

Select a programme.

TV/RAD

TV/RADIO

From the programme you are currently watching, the mode will change from TV to DTV to Radio.
Switch to the chosen programme number.
Paging through a programme list

Turns the pages.

Return to normal TV viewing.
Displaying the favourite programme table
Display the Favourite Programme table.
This function operates only with devices with the SIMPLINK logo. Please check the SIMPLINK logo. This TV might not function properly when using it with other products with HDMI-CEC function. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. O If you do not want SIMPLINK menu, select O f f. SIMPLINK function is not supported by HDMI IN 3 input.
Menu Language : English Audio Language : English Subtitle Language : English Hard of Hearing( ) Off Country :UK Input Label SIMPLINK : On SIMPLINK Key Lock : Off
Menu Language : English Audio Language : English Subtitle Language : English Hard of Hearing( ) Off Country :UK Input Label Off SIMPLINK : On SIMPLINK On On Key Lock : Off

Select OPTION.

Select SIMPLINK.
Save. Press the MENU button to return to normal TV viewing. Press the RETURN button to move to the previous menu screen.
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G After connecting the HDMI terminal for the home theatre with the SIMPLINK function using the above method, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN terminal on the back of the SIMPLINK device with the OPTICAL cable. G When operating an external device with SIMPLINK, press the TV button from the MODE buttons on the remote control. G When you switch the Input source using the INPUT button on the remote control, you can stop the operation of a device controlled by SIMPLINK G When you select or operate a media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker).

SIMPLINK Functions

Disc playback Control connected AV devices by pressing the not provide such functions.) , OK, G, A, l l, FF and GG buttons.(The button does
Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it. Power off all devices When you switch off the TV, all connected devices are turned off. Switch audio-out Offers an easy way to switch audio-out. Sync Power on When you play the connected AV device, TV will automatically turn on. * A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function.

SIMPLINK Menu

Press the
button and then OK button to select the desired SIMPLINK source.
T V v i e w i n g : Switch to the previous TV programme regardless of the current mode. D I S C p l a y b a c k : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. V C R p l a y b a c k : Play and control the connected VCR. H D D R e c o r d i n g s p l a y b a c k : Play and control recordings stored in HDD. Audio Out to Home theater/Audio Out to TV: Select Home theater or TV speaker for Audio Out.
Home theater: Only one supported at once DVD, Recorder: Up to three supported at
Selected Device When no device is connected (displayed in gray) When a device is connected (displayed in bright colour)
VCR: Only one supported at once

INPUT LABEL

: Off : Off Off : Off : Off : Canary GMT
: Off Repeat :Off Off Hour : Off Minute : Off Mode : Canary GMT

1/Mar. 2007 16:09

Off DTV 800 30

Programme Volume Close

To cancel On/Off Time function, select Off. For On Time function only

Select Mode.

Select Off time or On time.

Select Repeat.

Select TV, DTV or Radio.
Set the programme. Select Off, Once, Daily, Mon ~ Fri, Mon ~ Sat, Sat ~ Sun or Sun. Set the hour.
Adjust volume level at switch-on.

Set the minutes.

AUTO SHUT-OFF SETTING
If the TV is switched on and there is no input signal, it will switch off automatically after 10 minutes.
Clock Off Time : Off On Time : Off Sleep Timer : Off Auto Sleep Off Auto Sleep : Off
Clock Off Time : Off On Time : Off Sleep Timer : Off Auto Sleep : Off Auto Sleep Off Time Zone : Canary GMT
Off Off On Time Zone : Canary GMT

Select Auto Sleep.

Select Off or On.

TIME ZONE SETUP

When you select a Time Zone city, the TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and the time is set automatically by a digital signal.

Select Time Zone.

Select your viewing area time zone.

Confirm it.

SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed.
Select S l e e p T i m e r.
Select O f f, 1 0, 2 0, 3 0, 6 0, 9 0, 0, 0 or 0 M i n.
Select the number of minutes.
When you switch the TV off, the preset sleep time is cancelled. You can also adjust Sleep Timer in the TIME menu.
SET PASSWORD & LOCK SYSTEM
Enter the password, press 0, 0, 0, 0 on the remote control handset.
Lock System : Off Lock System Set Password Block Programme Parental Guidance : Off
Lock System Lock System Set Password Block Programme Parental Guidance : Off

Off : Off Off On

Select LOCK.
If you forget your password, press 7, 7, 7, 7

on the remote control handset.

Select Lock System.

Select On.

Set the password.

Input a 4-digit password. Be sure to remember this number! Re-enter new password for confirm.

BLOCK PROGRAMME

Blocks any programmes that you do not want to watch or that you do not want your children to watch. It is available to use this function in Lock System On.

YLE TV1

1 YLE TVTV4 Stockholm 6 CNN 9 YLE Teema 24 TV4 Fakta 24 TV4 Fakta 24 TV4 Fakta 87 Doku/Kika

2 YLE TVYLE FST 8 YLE24

Lock System : Off Set Password Block Programme Block Programme Parental Guidance : Off
14 TV4 Film 50 TVKanal Lokal 86 Info/3sat 88 TVE 1

Pr. Change Block/Unlock

D F G E

Navigation

Page Change

RETURN Previous

Select Block Programme.
Enter the Block Programme.
GREEN Select a programme to be locked.
PARENTAL CONTROL (IN DIGITAL MODE ONLY)
This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. A password is required to gain access to this menu. This TV is programmed to remember which option it was last set to even if you switch the TV off. Prevents children from watching certain adults TV programmes, according to the ratings limit set.
Lock System : Off Set Password Block Programme Parental Guidance : Off Parental Guidance
Lock System : Off Set Password Block Programme Parental Guidance : Off Parental Guidance Off

Off Close

Select Parental Guidance.

KEY LOCK

The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing.
Menu Language : English Audio Language : English Subtitle Language : English Hard of Hearing( ) Off Country :UK Input Label SIMPLINK : On Key Lock : Off Key Lock
Menu Language : English Audio Language : English Subtitle Language : English Hard of Hearing( ) Off Country :UK Input Label SIMPLINK : On Off Key Lock : Off Off Key Lock On E
In Key Lock On, if the TV is turned off, press

Select Key Lock.

TELETEXT IN DIGITAL SERVICE
Press the numeric or P (or (PR + - or P + -)) button to select a certain service which broadcasts digital teletext. Press the TEXT or coloured button to switch on teletext. Follow the indications on digital teletext and move onto the next step by pressing OK, , RED, GREEN, YELLOW, BLUE or NUMBER buttons and so on. Press the TEXT or colour button to switch off digital teletext and return to TV viewing. Some services may allow you to access text services by pressing the RED button.
Initializing (Reset to original factory settings)
This function operates in current mode. To initialize the adjusted value. When the Lock System menu is On, the message to enter the password appears.
Country Input Label SIMPLINK Key Lock Set ID ISM Method Power Saving Factory Reset Factory Reset
:UK : On : Off : Normal : Level 0
:UK : On : Off : Normal : Level 0 Enter Password

* * * *

Cancel
In Lock System On, if you forget your
password, press 7, 7, 7, 7 on the remote control handset. Select Factory Reset.

TROUBLESHOOTING

The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
The remote control does not work
Power is suddenly turned off
Is the sleep timer set? A Check the power control settings. Has the Power supply been interrupted. A Is Auto sleep activated on this station?
The video function does not work. Check whether the TV is switched on. Try another channel. The problem may be with the broadcast. A Is the power cord inserted correctly into the mains? A Check your antenna direction and/or location. A Test the mains outlet by plugging another TV into the same outlet.

No picture &No sound

Picture appears slowly after switching on
This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.
No or poor colour or poor picture
Adjust Colour in menu option. Allow a sufficient distance between the TV and the VCR. A Try another channel. The problem may be with the broadcast. A Are the video cables installed properly? A Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures No picture when connecting HDMI

16. ISM Method (Plasma TV only) (Command: j p )
G To control the ISM method. You can also adjust ISM
19. Equalize (Command : j v)

G To adjust equalize.

Method in OPTION menu. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 01: Inversion 02: Orbiter 04: White wash 08: Normal
[j][v][ ][Set ID][ ][Data][Cr] MSB Data : 0 LSB 0
[p][ ][Set ID][ ][OK/NG][Data][x]
17. Power Saving (Plasma TV only) (Command: j q)
G To reduce the power consumption of the TV. You can also
Frequency Step Frequency : 0 120Hz 1 200Hz 2 500Hz 3 1.2kHz 4 3kHz 5 7.5kHz 6 12kHz Step (Frequency data): Refer to Real data mapping 3. See page 1 15.
[v][ ][Set ID][ ][OK/NG][Data][x] * Euqalize command expression Step 0. 0. 0. 1. 0. 1. 0. 1. 0. 1. Frequency 120Hz 200Hz 500Hz 1.2KHz 3KHz 7.5KHz 12KHz OSD Value -24. 0. 24
adjust Low Power in OPTION menu. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data Min :00 ~ Max :04 (*transmit by hexadecimal code)
[q][ ][Set ID][ ][OK/NG][Data][x]
18. Auto Configure (Command: j u)
G To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 73 : Step 74 : Step C7: Step 199 FE : Step 254 FF : Step 255
* Real data mapping :-: -:-:0 4E : +38 4F : +: +40
Ex) If you wish to set frequency 500Hz and -20 value on menu OSD, refer to Real data mapping 3 and then find Step value for -20. 010 (500Hz) 0001 1(Step 3) => 0100001 => (Hexadecimal) : [j][v][ ][Set ID][ ][43][Cr] * 3 bits of Frequency and 5 bits of Step makes 8 bits (1 byte). Change 8 bits to Hexadecimal code.
20. Tune Command (Command: m a)
G Select channel to following physical number.
24. Input select (Command: x b) (Main Picture Input)
G To select input source for main picture.
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Data 00 : High channel data Data 01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> (188H), DTV No. 0 -> Dont care Data 02 : 0x00 : ATV, 0x10 : DTV, 0x20 : Radio Channel data range Analogue - Min: 00 ~ Max: 63 (0~99) Digital - Min: 00 ~ Max: 3E7 (0~999) Ack [a][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 ~ Max: 7DH