ESPECIFICACIONES

NOTA: las especificaciones que reflejan mejoras en los productos estn sujetos a cambios sin previo aviso.

1. Application Range.

This spec sheet is applied to the 37"/42"/47"/52" LCD TV used LP81A chassis.

3. Test method

3.1 Performance : LGE TV test method followed. 3.2 Demanded other specification Safety : UL, CSA, IEC specification 3.3 EMC : FCC, ICES, IEC specification

2. Specification

Each part is tested as below without special appointment 2.1 Temperature : 255C(779F), CST : 405C 2.2 Relative Humidity : 6510% 2.3 Power Voltage : Standard input voltage (100~240V@ 50/60Hz) Standard Voltage of each products is marked by models 2.4 Specification and performance of each parts are followed each drawing and specification by part number in accordance with BOM. 2.5 The receiver must be operated for about 20 minutes prior to the adjustment.
4. General Specification(TV)
No 1. Item Display Screen Device Specification 37" wide Color Display Module 42" wide Color Display Module 47" wide Color Display Module 52" wide Color Display Module 2. 3. Aspect Ratio LCD Module 16:9 37" TFT WXGA LCD 42" TFT WXGA LCD 47" TFT WXGA LCD 42" TFT WUXGA LCD 47" TFT WUXGA LCD 52" TFT WUXGA LCD 4. 5. 6. Operating Environment 1) Temp. : 0 ~ 40 deg 2) Humidity : 0 ~ 85% Storage Environment 1) Temp. : -20 ~ 60 deg 2) Humidity : 0 ~ 85 % Input Voltage AC100 ~ 240V, 50/60Hz 37" HD MAKER :LPL 42" HD MAKER :AUO, LPL 47" HD MAKER :LPL 42" FHD MAKER : LPL 47" FHD MAKER : LPL 52" FHD MAKER : SHARP LGE SPEC Measurement Result Remark Resolution:1366X768(HD) Resolution:1366X768(HD)/1920*1080(FHD) Resolution:1366X768(HD)/1920*1080(FHD) Resolution:1920X1080(FHD)

Item Power Consumption

Specification Power on (Blue) : LG30/LG50 Power on (White) : LG60 TBD 250W 230W 320W 310W 350W 52" St-By (Red) 1.0 W (All) 47" 37" 42" HD HD FHD HD FHD FHD

Measurement

Result
Remark Volume: 1/8 volume of sound distortion point
LG60:St-by Light condition Inch 42" (H)x(V)x(D) 983 x 576 x 52.7 0.681 x 0.CCFL 42" 37" 877 x 516.8 x 55.5 0.200 x 0.EEFL 42" 983 x 576 x 51 0.227 x 0.681 47" 1096 x 640 x 51 0.76125 x 0.76125 42" 983 x 576 x 47.3/(51) 0.4845 x 0.4845 47" 1096 x 640 x 50/(51) 0.5415 x 0.5415 52" 1219.0x706.7x64.64 0.600 x 0.600 24CCFL 3H,AG/ 2H, AG LPL,CMO,AUO / Sharp unit mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm (W) x (H) x (D) (H) x (V) [w/o inverter]/(with inverter) [w/o inverter]/(with inverter) [with inverter] [with inverter] [with inverter] Remark [with inverter]

3. Adjustment items

3.1 PCB assembly adjustment items
Download the MSTAR main software (IC801, Mstar ISP Utility)
3.2 SET assembly adjustment items
DDC Data input. Adjustment of White Balance. Factoring Option Data input
(2) Connect the download jig to D-sub jack

- 11 -

4.1.2 Download steps (1) Execute ISP Tool program in PC, then a main window will be opened
(5).Click "Auto(2)" tab and set as below (6).click "Run(3)". (7).After downloading, check "OK(4)" message.

Double click

(2) Click the connect button and confirm "Dialog Box". # USB DOWNLOAD 1. Put the USB Stick to the USB socket
(3) Click the Config button and Change speed E2PROM Device setting : over the 350Khz
(4) Read and write bin file Click "(1)Read" tab, and then load download file(XXXX.bin) by clicking "Read".
2. Automatically detecting update file in USB Stick

- 12 -

3. Select "Start" Button and press "ok" button Updating is staring.
4.2.1.1 Confirmation - We confirm whether "0xF3 (offset), 0xF4 (gain)" address of EEPROM "0xBC" is "0xAA" or not. - If "0xF3", "0xF4" address of EEPROM "0xBC" isnt "0xAA", we adjust once more - We can confirm the ADC values from "0x06~0x0B" addresses in a page "0xBC" *Manual ADC process using Service Remocon. After enter Service Mode by pushing "ADJ" key, execute "Auto-RGB" by pushing "_" key at "Auto-RGB". 4.2.2 Component input ADC 4.2.2.1 Component Gain/Offset Adjustment7 - Convert to Component in Input-source - Input the Component ( Which has 720p@60Hz YPbPr signal : 100% Color Bar (MSPG-925F Model : 217 / Pattern: 65 ) into Component.
- Adjust by commanding AUTO_COLOR_ADJUST (0xF1) 0x00 0x02 instruction 4. Finishing the version updating, you have to put out USB stick and "AC Power" off 5. After putting "AC Power" on and check updated version on your TV 4.2.2.2 Confirmation - We confirm whether "0xF3 (offset), 0xF4 (gain)" address of EEPROM "0xBC" is "0xAA" or not. - If "0xF3", "0xF4" address of EEPROM "0xBC" isnt "0xAA", we adjust once more - We can confirm the ADC values from "0x06~0x0B" addresses in a page "0xBC" *Manual ADC process using Service Remocon. After enter Service Mode by pushing "ADJ" key, execute "Auto-RGB" by pushing "_" key at "Auto-RGB".

4.2 ADC Process

O Required Equipments - Remote controller for adjustment - MSPG-925F Pattern Generator 4.2.1 Method of Auto RGB Color Balance - Convert to RGB PC in Input-source - Input the PC 1024x768 @ 60Hz 1/2 Black & White Pattern(MSPG-925F model:60, pattern:54) into RGB
- Adjust by commanding AUTO_COLOR_ADJUST(0xF1) 0x00 0x02 instruction.

- 13 -

5. Adjusting the White Balance
5.1 Purpose and Principle for adjustment of the color temperature
- Purpose : Adjust the color temperature to reduce the deviation of the module color temperature. - Principle : To adjust the white balance without the saturation, (Fix the one of R/G/B gain to C0 and decrease the others.)
6. Adjustment of White Balance
Adjustment mode : Two modes (Cool and Warm) (Medium data is automatically calibrated by the Cool data) Color analyzer(CA100+, CA210) should be used in the calibrated ch by CS-1000 (LCD : CH9, PDP : CH10) Operate the zero-calibration of the CA100+ or CA-210, then stick sensor to the module when adjusting. For manual adjustment, it is also possible by the following sequence. 1) Select white pattern of heat-run by pressing "POWER ON" key on remote control for adjustment then operate heat run longer than 15 minutes. (If not executed this step, the condition for W/B may be different.) 2) Push "Exit" key. 3) Change to the AV mode by remote control.(Push front-AV or Input key) 4) Input external pattern(85% white pattern) 5) Push the ADJ key two times (entering White Balance mode) 6) Stick the sensor to the center of the screen and select each items (Red/Green/Blue Gain and Offset) using / (CH +/-) key on R/C. 7) Adjust R/ G/ B Gain using / (VOL+/-) key on R/C. 8) Adjust two modes (Cool and Warm) (Fix the one of R/G/B and change the others) 9) When adjustment is completed, Exit adjustment mode using EXIT key on R/C.
5.2 Adjustment mode : Two modes of Cool and Warm (Medium data is automatically calibrated by the Cool data)
O Required Equipments - Remote controller for adjustment - Color Analyzer : CA100+ or CA-210 or same product LCD TV( ch : 9 ), - Auto W/B adjustment instrument(only for Auto adjustment)
5.3 Connecting diagram of equipment for measuring (For Automatic Adjustment)
(1) Enter the adjustment mode of DDC - Set command delay time : 50ms - Enter the DDC adjustment mode at the same time heat- Maintain the DDC adjustment mode with same condition of Heat-run -> Maintain after AC off/on in status of Heat-run pattern display) (2) Release the DDC adjustment mode - Release the adjust mode after AC off/on or std-by off/on in status of finishing the Hear-run mode - Release the Adjust mode when receiving the aging off command(F00) from adjustment equipment - Need to transmit the aging off command to TV set after finishing the adjustment. - Check DDC adjust mode release by exit key and release DDC adjust mode (3) Enter the adjust mode of white balance - Enter the white balance adjustment mode with aging command(F3, 00, FF) * Luminance min value is 200cd/ in the cool mode( For LCD)

- 18 -

10. No Sound
10-1 Symptom 1) LED is green. 2) Screen display but sound is not output.

10-2 Check process

All input(mode) is no sound. No No Is the speaker on it men? Menu? Yes Set on speaker in menu

Only HDMI is no sound

Download the EDID data.
Is the speaker cable normal?

Check the Speaker cable

Yes Only AV/ COM2/PC input is no sound. Yes
Is the output of IC600 normal? Yes

Replace IC600

Check the signal after IC600 refer to circuit diagram
No IC801 operate normal? Normal Yes

Replace IC801

Only External speaker is no sound
Check the Tuner In/Out. No IC 601 operate normal? Normal Yes Replace Main B/D Replace IC601

- 19 -

RF (Tuner)
LINE IN SIF IN CVBS IN x0.55 AMP_MUTE TPA3107D Audio Amp CVBS IN Y/C IN x0.55 LINE_MUTE Mstar Romeo LGE6891CD AUDIO_SW LINE IN LVDS x0.55 S_VIDEO_DET LINE OUT LM324 X4 AMP LINE OUT SW_RESET SERIAL PART_I2C FLASH LINE IN DDR MEM MAIN NVM

TUNER_I2C CVBS IN

AV1 in
Spk Out 1W(Mono) SideAV in (AV2 in)

DISPLAY MODULE

Y/Pb/Pr IN

Comp1 in

LINE IN LINE IN x0.55 ROM_I2C DSUB_DDC x0.55 LINE IN UART_Rx/Tx HDMI_SEL TMDS351PAG HDMI MUX MC74HC4066 Audio SW EDID NVM TMDS(HDMI in) DDC/HDP/CEC PART_I2C NTP3000A SW_RESE Digital T I2S OUT Audio AMP TMDS(HDMI in) DDC/HPD/CEC [CEC not through HDMI MUX, direct JACK to MAIN IC]

Comp2 in

RGB in (D/L)

LINE IN R/G/B/HS/VS IN

DIAGRAMA DE BLOQUE
- 20 DDC EDID NVM DDC EDID NVM MPEG RX/TX MPEG RESET I2S IN 656 IN DDR MEM SERIAL FLASH

PC Audio in

RS-232C

Rx/Tx MX3232

EDID NVM DDC

TMDS(HDMI in)

DDC/HPD/CEC

HDMI3 (Option)

PART_I2 C SW_RESE 656 IN T CVBS OUT

TW9910 Sub Decoder

USB(AV I/O, Data I/O)

USB (Option)

Zoran VADDIS-966XD +5V BD2041 MPEG Decoder Protect IC

(Option)

VISTA EN DESPIECE

- 21 -

INPUT1 : COMP1/2,RS232C,PC

INPUT2 : CVBS,SIDE AV

RS-232C *ONLY LG30
RD103 R106 220K C115 1000pF READY R134 10K

JK101 PPJ209-02

COMPONENT2
[RD]O_SPRING 3E [RD]CONTACT 4E [RD]1P_CAN2 2E [WH]C_LUG_L 5D [WH]1P_CAN 2D [RD]C_LUG_L 5C [RD]1P_CAN1 2C [BL]C_LUG_L 5B [BL]1P_CAN 2B [GN]O_SPRING 3A [GN]CONTACT 4A [GN]1P_CAN 2A
D119 30V SD05 RD118 30V SD05 RD117 30V SD05 RD116 5.6V RR120 220K R140 10K C114 1000pF READY D115 5.6V RR119 220K R138 10K C113 1000pF READY R139 12K

JK100 PPJ209-02 COMP2_R

COMPONENT1
3E [RD]O_SPRING 4E[RD]CONTACT 2E [RD]1P_CAN2 5D [WH]C_LUG_L
D104 RR108 220K C116 1000pF READY R136 10K 5.6V

COMP1_R

R135 12K

+5V_ST 10 5

RS232C IC101 MAX3232CDR C109 0.1uF C110 0.1uF

JK200 PPJ148-10

SIDE AV
4 JK204 PPJ218-01 4A [YL]O_SPRING SIDE_V

5B 4B 2B 3 2

RC214 100pF 50V READY
[YL]CONTACT [YL]O_SPRING [YL]1P_CAN [WH]C_LUG_L [WH]1P_CAN [RD]CONTACT [RD]O_SPRING [RD]1P_CAN
D204 5.6V D202 5.6V D201 SD05 R208 75

COMP2_L

R141 12K

COMP1_L

R137 12K C107 0.1uF

IR_OUT

RRC112 OPT D121 CDS3C30GTH 30V C111 OPT D120 CDS3C30GTH 30V

RC207 OPT

2D [WH]1P_CAN 5C [RD]C_LUG_L

CVBS_VIN

5A 2A 3B 1 2B [WH]U_CAN [RD]O_SPRING [RD]CONTACT [RD]U_CAN

D215 5.6V

COMP2_Pr

COMP1_Pr

D105 SD05 R109 75
[YL]CONTACT [YL]U_CAN [WH]C_LUG

C213 0.1uF 16V

D214 SD05

R241 75

C106 0.1uF

R222 0

R218 R209 220K

R128 100

CVBS_LIN

R219 12K

2C [RD]1P_CAN1 5B [BL]C_LUG_L

R129 100

C211 100pF 50V OPT

C108 0.1uF

COMP2_Pb

COMP1_Pb

D106 SD05 R110 75

+3.3V_MST +5V_ST

R247 R242 220K

10K R248 12K

SIDE_LIN

5A 4A 2A

2B [BL]1P_CAN 3A [GN]O_SPRING

RC212 100pF 50V OPT

R220 R212 220K

CVBS_RIN

R221 12K

COMP2_Y

COMP1_Y

D107 RSD05

R150 4.7K READY

R151 4.7K READY

KCN-DS-1-0088

4C 5C 2C

R252 0
R249 C215 100pF 50V READY
4A[GN]CONTACT 2A [GN]1P_CAN
D216 5.6V R244 220K R250 12K

SIDE_RIN

SDC 15 applying check

*RS232C TX

MAIN : EAN41348201(TI) SUB : 0IMCRSG010A(STM)

JK201 PPJ200-01

JK205 PSJ015-GROUND D217 SD05 ROPT R236 1K OPT D208 OPT C216 100pF 50V OPT R229 470K

R213 0

SPK_R-_HOTEL

OPT C208 10uF

SIDE_Y

C_LUG_S_2

MNT_LOUT

**MULTI ITEM PC

JK104 KCN-DS-1-0089

6630TGA004K AC A C

PC SOUND

C B OPT Q203 E

+5V_MULTI
C100 0.1uF D108 ENKMC2837-T112
C101 0.1uF D109 ENKMC2837-T112
C102 0.1uF D111 ENKMC2837-T112
1.24C02-SUB:0IMMRAL014D 2.ENKMC2837-SUB:0DS226009AA (KDS226)

JK102 PEJ024-01

C_LUG_L_2 D218 SD05 R246 75

SIDE_C

RT1C3904-T112 R211 0
OPT R237 1K OPT D209 OPT C217 100pF 50V OPT R230 470K C B

C_LUG_S_1

AUDIO_R MNT_ROUT MUTE_LINE

POP NOISE

TXCE0TXCE1TXCE2TXCLKETXCE3-

A2. HPD 18 +5V_POWER GND

R334 R383 0

30K FHD 8BIT:NC

16 SDA 15 SCL 14 NC

JP1115

16 SDA 15 SCL

JP1117

14 NC 13 CEC 12 CLK-

JP1118

DDC_SDA2 DDC_SCL2 CEC TMDS2_RXCTMDS2_RXC+ TMDS2_RX0TMDS2_RX0+ TMDS2_RX1TMDS2_RX1+ TMDS2_RX2TMDS2_RX2+
+5V_HDMI_2 R329 10K R328 10K
13 CEC 12 CLK11 CLK_SHIELD 10 CLK+ 9 DATA08 DATA0_SHIELD
CEC TMDS3_RXCTMDS3_RXC+ TMDS3_RX0TMDS3_RX0+ TMDS3_RX1TMDS3_RX1+ TMDS3_RX2TMDS3_RX2+

+5V_HDMI_3 R352 10K

D302 30V

17 DDC/CEC_GND

JP1116

DDC_SDA3 DDC_SCL3

R376 0

C MMBD301LT1G D304

Q306 BSS83

D B S G

TXCE0+ TXCE1+ TXCE2+ TXCLKE+ TXCE3+ TXCE4+

R431 READY 0

R332 200

CDS3C30GTH

C307 0.01uF 50V READY

HD FHD

CPT LPL 32 sharp

R428 O X X

HPD_S/W_3 TMDS2_RX2+ TMDS2_RX2-

TMDS2_RX1+ TMDS2_RX1-

11 CLK_SHIELD 10 CLK+ 9 DATA08 DATA0_SHIELD 7 DATA0+ 6 DATA15 DATA1_SHIELD 4 DATA1+ 3 DATA22 DATA2_SHIELD 1 DATA2+ 20 JACK_GND 21.

TMDS2_RX0+ TMDS2_RX0-

R351 10K
TMDS2_RXC+ TMDS2_RXCDDC_SCL2 DDC_SDA2 HPD_S/W_2

HDMI3_5V_DET

HDMI2_5V_DET
7 DATA0+ 6 DATA15 DATA1_SHIELD 4 DATA1+ 3 DATA22 DATA2_SHIELD 1 DATA2+

+5V_MULTI +5V_ST

0 R359 READY A1 A2
R407 4.7K FHD RHD TXCO0TXCO1TXCO2TXCLKOTXCO3-
+3.3V 10BIT except for 52 sharp R401 4.7K

D305 KDS184S

KDS184

R402 8BIT or 52 sharp 0

0.01uF

R370 0

R369 0

DC1R019NBH JK303

TXCO4-

R373 0

+3.3V_HDMI_SW

RREADY

JK302 QJ41193-FEE2-7F
**MULTI ITEM 1.24C02-SUB:0IMMRAL014D
R401 4.7K 10BIT X 8BIT(HD) X 8BIT(FHD) X 52 sharp 32 sharp X

R402 X 0 X

R_USE LG50_60_70 L411-*1 0
2.SMD HDMI Jack-SUB:6612B00015B +5V_ST HPD_S/W_1

+5V_HDMI_1

A1 A2 KDS184

L410-*R_USE LG50_60_70

TXCLKO+,TXCLKO-,TXCO0+,TXCO0-,TXCO1+,TXCO1-,TXCO2+,TXCO2-,TXCO3+,TXCO3-,TXCO4+,TXCO4-
DDC_SDA3 DDC_SCL3 TMDS3_RXCTMDS3_RXC+ TMDS3_RX0TMDS3_RX0+ TMDS3_RX1TMDS3_RX1+

RR378 22

SDA3 SCL3 GND_1 B31 A31 VCC_1
A14 B14 VCC_6 A13 B13 GND_6 A12 B12 VCC_5 A11 B11 SCL1 SDA1 HPD1 EQ S2
TMDS1_RX2+ TMDS1_RX2C316 0.01uF
BEAD_USE LG50_60_70 L411 USE LG50_60_70 BG1608B501F R422 0

SCL_LED SDA_LED

R420 L403 EAM38769502 4.7K BG1608B121F L406 EAM38769502

+3.3V_MST

HPD_MST_1

R300 10K

R310 1K Q301C

RT1C3904-T112 E

D301 KDS184S
IC300 AT24C02BN-10SU-1.8 2SC3875S
B32 A32 GND_2 B33 A33 VCC_2
C300 50V R326 R327 0.01uF 47K 47K RR320 100

IC302 TMDS351PAG

TMDS1_RX1+ TMDS1_RX1P400
USE LG50_60_70 BG1608B501F L410 BEAD_USE LG50_60_70

R421 4.7K

KEY1 KEY2
+3.3V_MST CUSE LG50_60_70 L407 120OHM 470pF C404 470pF C411 0.1uF C408 0.1uF NOT LG60 R404 L404 120OHM UBW2012-121F C406 22uF 16V R413 R425 3.3K Q406 LG60 PNP E B C RLG60 R444 3.3K R445 3.3K LG60 +5V_ST
TMDS1_RX0+ TMDS1_RX0C315 0.01uF

12505WS-15A00

A2. HPD 18 +5V_POWER 17 DDC/CEC_GND 16 SDA 15 SCL GND

JP1119

JP1120

DDC_SDA1 DDC_SCL1

+5V_HDMI_1 R324 10K R325 10K

TMDS3_RX2TMDS3_RX2+

B34 A34 GND_3 VSADJ
11 CLK_SHIELD 10 CLK+ 9 DATA0-
8 DATA0_SHIELD 7 DATA0+ 6 DATA1-
5 DATA1_SHIELD 4 DATA1+ 3 DATA2-

2 DATA2_SHIELD 1 DATA2+

20 JACK_GND 21.
CEC TMDS1_RXCTMDS1_RXC+ TMDS1_RX0TMDS1_RX0+ TMDS1_RX1TMDS1_RX1+ TMDS1_RX2TMDS1_RX2+
TMDS1_RXC+ TMDS1_RXCDDC_SCL1 DDC_SDA1 HPD_S/W_1 +3.3V_HDMI_SW R374
4.7K R375 4.7K READY *TI Recommand -> Pull up
USE LG50_60_70 ZD401 5.6B
5.6B ZD402 USE LG50_60_70

C414 22uF 16V

UBW2012-121F USE LG50_60_70

+5V_ST_SW

LG30 LG50 LG60 LG70

R404 O O X O

R444 X X 3.3K X
R445 Q406 L410 L411 L407 X X X X X BEAD BEAD BEAD X X O BEAD BEAD BEAD 3.3K BEAD BEAD BEAD X X

C414 X 22uF 22uF 22uF

R414 X X 10K X

READY 6

LED_R_PWM_Big EYEQ_RESET IR
+5V_ST IR-OUT R440 10K R443 10K IR-OUT C B C402 Q405 2SC3052 E OPT READY E IR-OUT Q404 2SC3052 IR-OUT R441 10K C +5V_ST R442 IR-OUT 22
**MULTI ITEM 2SC3052(P/N:0TRIY80001A) RA:2SC3875(P/N:0TR387500AA)

R372 4.7K 1%

SCL_SINK

SDA_SINK

HPD_SINK

HDMI1_5V_DET

IR-OUT L402 EAM38769502 C407 ZD400 5.6B R439 47K B IR-OUT

R366 4.7K READY

HDMI_SEL2
OPT C403 47pF R414 BG1608B121F R403 10K READY LG60 10K

C310 0.01uF

C312 0.01uF

R345 R0

SPK-N* L G 6

Sound module output

R347 R0

R355 R0

R357 R0
+3.3V +3.3V R371 47K R365 READY 0 R360 4.7K READY
13 L400 C0.1uF EAM38769502
NOT LG60 Q402 2SA1530A-T112-1R NOT LG60 C E B R409 10K READY R410 100

HDMI_SEL1

LC401 470pF NOT LG60

EAM38769502 NOT LG60

HDMI_0+ HDMI_0-

HDMI_1+ HDMI_1-

HDMI_C+ HDMI_C-

JK301 QJ41193-FEE2-7F

HDMI_2+ HDMI_2-

AC_DET

+5V_ST R434 10K NOT LG60 C
3.3K R417 READY B 3.3K R435 NOT LG60

LED_R/PWM

HDMI_SCL HDMI_SDA

Q403 KRC102S NOT LG60 E

CONTROL KEY
NOT LG60 THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC.

Digital Audio AMP

+16V_NTP C615 0.1uF C617 0.1uF R604 C612 3. 3 35V 330uF C613 0.01uF
+16V_NTP C666 C620 330uF 35V 1000pF R607 3.9

+16V_NTP

C622 1000pF
+1.8V L611 UBW2012-121F EAM38769505 L603 2S DA-8580 2F 1S 1F C632 0.47uF C636 0.1uF R623 4.7K C637 0.1uF R624 4.7K C639 0.01uF R626 3.3 R625 3.3 C638 0.01uF L610 UBW2012-121F EAM38769505

SPK_L-

120OHM

SMAW250-04

UBW2012-121F

SPK_L+

+1.8V_AVDD EAM38769505 L615

SPK_RSPK_R+ SPK_LSPK_L+

R609 3.9

+1.8V_DVDD

22000pF

UBW2012-121F EAM38769505

READY 30V D601

D607 READY 1N4148W

C618 1uF

D606 READY 1N4148W

C616 22000pF

R608 3.9 C619 1000pF

R610 3.9 C621 1000pF

EAP38319001

PGND1A_2

PGND1A_1

PVDD1A_2

PVDD1A_1

PVDD1B_2

PVDD1B_1

PGND1B_2
TU500 TAFT-Z703D 1 NC_GND_6

PGND1B_1

OUT1A_2

OUT1A_1

OUT1B_2

OUT1B_1

NON EU TUNER

TU500-*1 TAFT-H703F

NTSC TUNER
NC_1 GND_1 +B[5V] NC_2 RF_AGC TP[33V_OPTION] NC_3 GND_2 DATA CLOCK AS NC_4 V-OUT AFT A-OUT SIF-OUT NC_5 NC_6 NC_7 NC_8

BST1A C608 READY 1uF D602 30V VDR1A /RESET AD VSS_IO CLK_I C642 100pF
NC_2 VDR2A BST2A PGND2A_2 PGND2A_1 OUT2A_2 OUT2A_1 PVDD2A_2 PVDD2A_1 PVDD2B_2 PVDD2B_1 OUT2B_2 OUT2B_1 PGND2B_2
D604 READY 1N4148W 100V 30V D600 READY

Chinese Hotel Option

C624 1uF +16V_NTP C625 C631 22000pF 1000pF R618 3.9 +16V_NTP C635 1000pF +16V_NTP R622 3.9
D605 READY 1N4148W 100V HOTEL_OPT P600 12505WR-09A00
+B[5V] NC_2 RF_AGC TP[33V_OPTION]

R514 0

+5V_TUNER

C521 10uF 16V

Near the pin

SW_RESET I2S_MCLK

+1.8V_AVDD C603 1000pF C601 100pF R600 3.3K +3.3V

C606 1000pF

R601 100

C503 0.01uF

L502 BLM18BD102SN1D READY

10 READY

CLK_O VDD_IO

C507 0.01uF

C510 4.7uF 35V

IC600 NTP3000A

7 NC_GND_DATA 10 CLOCK 11 AS 12 NC_V-OUT 14 AFT 15 A-OUT 16 SIF-OUT 17 NC_NC_NC_NC_SHIELD

AGNDPLL LFM AVDDPLL

10K R648

C626 0.1uF

C629 0.1uF

1S 1F EAP38319001

C643 R627 0.1uF 4.7K
R635 3.3 C647 0.01uF L612 UBW2012-121F EAM38769505

10K R631 HOTEL_OPT

C605 0.1uF

DGNDPLL

L607 2S DA-8580 2F
C644 R628 0.1uF 4.7K C640 0.47uF

C648 0.01uF R636 3.3

SPK_R+

AUDIO_R

HOTEL_OPT
L613 UBW2012-121F EAM38769505

4 SW_RESET 5

RRC501 27pF C502 27pF

R504 4.7K

R508 4.7K

SPK_RAMP_MUTE_HOTEL

6 HOTEL_OPT HOTEL_OPT C669 4.7uF 10V C B HOTEL_OPT Q609 RT1C3904-T112 E SPK_R-_HOTEL SPK_R+_HOTEL 8

+5V_TUNER R518 R0

+1.8V_AVDD C600 10uF 16V C602 0.1uF

DVDDPLL NC_1

SDA_TUNER

L501 UBW2012-121F

R617 3.9 C630 1000pF

R621 3.9 C634 1000pF

R632 200

SCL_TUNER

C520 0.1uF
RRE Q502 2SA1530A-T112-1R C

SHIELD

+1.8V_DVDD C604 10uF 16V C607 0.1uF

D603 30V BST2B READY

PGND2B_1

PROTECT

TV_MAIN
C513 270pF READY +5V_TUNER
R605 PWM_3B/PWM_HP2 PWM_3A/PWM_HP1

R503 4.7K

C623 22000pF

C614 1uF

B C506 4700pF R545 R553 OPT 0 E

AMP_MUTE_HOTEL R642

Q501 RT1C3904-T112 R515 1K C512 0.027uF

C609 16V 10uF

C610 0.1uF

I2S_SDO I2S_WS I2S_SCK

Q608 2SA1530A-T112-1R

10K R650

MAIN_SIF

R513 1K

AM_AUDIO

C651 1000pF 50V

100 R651

C667 33pF 50V READY

R602 100

R603 100

C668 33pF 50V READY

AMP :GAIN X 4

IC602 MC74HC4066ADR2G

SDA_Part SCL_Part

R611 680K

XA VCC

1 OUT1 LM324DOUT4 14

PWM2 NC_190 NC_189 GPIOB[6] GPIOB[4] VDDC_185 GND_184 VDDP_183 IRIN INT DDCA_CK DDCA_DA DDCR_CK DDCR_DA PWM1 PWM0 SAR3 SAR2 SAR1 SAR0 SDO CSZ SDI SCK GND_166 VDDP_165 ALE RDZ WZ R AD[7] AD[6] AD[5] AD[4] AD[3] AD[2] AD[1] AD[0] MADR[11] MADR[10] MADR[9] MADR[8] VDDC_149 GND_148 VDDM_147 MADR[7] MADR[6] MADR[5] MADR[4] MADR[3] MADR[2] MADR[1] MADR[0] WEZ CASZ AVDD_MEMPLL

X800 14.31818MHz

READY DEBUG TEST OPTION JK700 12505WS-04A00

100 RS232C

TXCE3-

TXCE2-

TXCE1-

TXCE4TXCE3+

TXCE2+

TXCE1+

100 100

HPLUGA REXT DDCDA_DA

REFM BIN1P SOGIN1 GIN1P RIN1P VCOM3 BIN0P VCOM2
DUPRD0 For Initial Download +1.8VDDA +1.8VDDC C747 0.1uF C748 0.1uF C749 0.1uF C750 0.1uF C751 0.1uF C752 0.1uF C753 0.1uF DEC_656[0] DUPTD0

R8022 R8027 R8028 R8023

0 READY 0 AVDD_33_254 AVDD_MPLL READY 0 0READY READY RXB0N RXB0P

R8064 1M

DDCDA_CK HSYNC1 VSYNC1 VCLAMP

R741 0

R705 1K

1/10W 5%

GND_17 RXA2N

External F/W Download

C735 0.1uF 50V

C736 0.1uF 50V

C737 0.1uF 50V

C738 0.1uF 50V

C739 0.1uF 50V

C740 0.1uF 50V

C741 0.1uF 50V

C742 0.1uF 50V

C743 0.1uF 50V

C744 0.1uF 50V

AVDD_33_14

TXCLKO+

TXCLKO-

TXCLKE+

TXCLKE-

TXCO4TXCO3+

TXCO3-

TXCO2-

TXCO1-

TXCO4+

TXCO2+

TXCO1+

TXCO0+

TXCO0-

TXCE4+

TXCE0+

TXCE0-
1/10W 5% ZORAN SRAM Board F/W Download

I2S_WS

R740 0

R704 1K

I2S_MCLK

LVACKM

LVBCKM

RXBCKN

RXBCKP

LVACKP

LVBCKP

IVSYNC

IHSYNC

NC_210

NC_209

NC_196

NC_195

DI[13]

DI[12]

DI[11]

DI[10]
TXCLKO+,TXCLKO-,TXCO0+,TXCO0-,TXCO1+,TXCO1-,TXCO2+,TXCO2-,TXCO3+,TXCO3-,TXCO4+,TXCO4TXCE0+,TXCE0-,TXCE1+,TXCE1-,TXCE2+,TXCE2-,TXCE3+,TXCE3-,TXCE4+,TXCE4-,TXCLKE+,TXCLKE-

GPIOB[5]

IC802 AT24C64AN-10SU-2.7

A0 VCC

GIN0P SOGIN0 RIN0P AVDD_33_39 GND_40 HSYNC0 VSYNC0 VSYNC2 BIN2P SOGIN2 GIN2P RIN2P C1

VDDC_240

VDDC_193

VDDP_235

VDDP_221

VDDP_207

VDDP_194

GPIOE[0]

GPIOE[1]

GPIOE[2]

GPIOE[3]

IC801-*1 LGE6891DD HD

SCL R8175 0

SCL_Part

GND 10K

HWRESET

GND_241

GND_222

GND_208

SDA_Part R8176 0

Y0 CVBS3 CVBS2 CVBS1 VCOM1 CVBS0 VCOM0 AVDD_33_58 CVBSOUT1 CVBSOUT0 GND_61 SIP0P AVDD_SIF SIF1P
GND_134 RASZ BADR[0] BADR[1] MCLK MCLKZ

VDDM_135

R8029 R8024 R8025

0 READY 0 READY 0

RXB1N RXB1P GND_3 RXB2N
PWM3 PWM2 NC_190 NC_189 GPIOB[6] GPIOB[5] GPIOB[4] VDDC_185 GND_184 VDDP_183 IRIN INT DDCA_CK DDCA_DA DDCR_CK DDCR_DA PWM1 PWM0 SAR3 SAR2 SAR1 SAR0 SDO CSZ SDI SCK GND_166 VDDP_165 ALE RDZ WRZ AD[7] AD[6] AD[5] AD[4] AD[3] AD[2] AD[1] AD[0] MADR[11] MADR[10] MADR[9] MADR[8] VDDC_149 GND_148 VDDM_147 MADR[7] MADR[6] MADR[5] MADR[4] MADR[3] MADR[2] MADR[1] MADR[0] WEZ CASZ AVDD_MEMPLL VDDM_135 GND_134 RASZ BADR[0] BADR[1] MCLK MCLKZ C802 R8178 C869 0.1uF C868 0.1uF
R8126 R8127 R866 R8115 R8116 R8117

NOT LG60

PWM2 PWM3

GPIOF[0]

GPIOF[1]

GPIOF[2]

GPIOF[3]

GPIOF[4]

GPIOF[5]

GPIOF[6]

GPIOF[7]

GPIOF[8]

GPIOF[9]

GND_100

DQS[1]

GND_105

MDATA[15]

MDATA[14]

MDATA[13]

MDATA[12]

MDATA[11]

MDATA[10]

VDDP_99

GND_113

GND_66

MDATA[7]

MDATA[6]

MDATA[5]

MDATA[4]

MDATA[3]

MDATA[2]

MDATA[1]

MDATA[9]

VDDC_101

MDATA[8]

VDDM_108

VDDM_114

VDDM_119

MDATA[0]

DQS[0]

LED_R/PWM LED_R_PWM_Big LG60 AC_DET TX_MPEG RX_MPEG PWM1 PWM0 EYEQ_RESET

AUVREF

L Q D M

AUOUTL3

AUOUTL2

AUOUTL1

AUOUTL0

AUOUTR3

AUOUTR2

AUOUTR1

AUVRADP

AUVRADN

AVDD_AU

AUOUTR0

A C M UO

A M N U O O

Capacitors on VBUSA should be placed as close to Connector as possible. HPD_MST_1

R1189 10K

R1190 1.2K
R1138 4.7K C B E Q1106 RT1C3904-T112

D1106 SAM2333

R1133 10K

AC_RST

P_16V C1122 0.1uF P_12V
L1106 UBW2012-121F EAM38769505
+16V_NTP C1148 0.1uF C1150 0.01uF

C1121 0.47uF

+5V_ST 0 R1129 10K READY R1196 10K 3 Q2SC3875S 1 R1135 10K

+5V_ST R1184 10K

C1137 47uF25V

C1139 0.1uF

*12V AUDIO and PANEL L1112 +12V MBW3216-501TF +12V EAM30764101 C1144 0.01uF

DISP_EN E_DIMMING

*SHARP 32" : DC DIMMING
L1107 C1138 220uF 16V C1140 0.1uF C1146 0.01uF UBW2012-121F RC1123 0.1uF

DC_DIM R1139 1K 1/10W 5%

+5VST_MST

SMAW200-24C

DC_DIM C1125 2.2uF 25VPWM_DIM CMO 32,42,47,57 RRCMO 32,42,47 RCMO 57"

R1139-*1/10W 5%

SWITCH VCC_LCD:12V or 5V 5V:5V_PULLUP,5V_MULTI

V0 = 0.8(R1+R2) / R2

NOT 32 Sharp UBW2012-121F
IC1100 SC4215ISTRT NC_1 EN

D1102 S2A

120OHM L1111

ADJ VO NC_3

R1107 5.6K

120OHM L1110

32 Sharp UBW2012-121F

50V +5VST_MST

VIN C1117 4.7uF C1102 0.1uF NC_2
R1106 18K +3.3V_MULTI_MST
*Applied to SIF,HDMI,ADC,MPLL,AUD

R1140 33K R1141 33K

C1126 1uF 25V S1 C Q1100 RT1C3904-T112 E G1
Q1101 SI4925DY 0TF492509AA D1_2 D1_1 D2_2 D2_1 L1105 UBW2012-121F C1135 EAM38769505 0.1uF C1141 100uF 16V L1104 UBW2012-121F EAM38769505 C1136 0.1uF R1152 2.2K R1153 2.2K R1154 2.2K

C1134 0.01uF

C1149 100uF 16V

C1109 100uF6V 1

C1152 10uF

D1103 MBRS190T3G 90V

IC1103 AZ1117H-ADJTRE1(EH11A) INPUT OUTPUT R1166 3.3K 1% 1 ADJ/GND R5%

PANEL_ON

R1134 10K

C1128 100uF6V 1

C1118 100uF 16V

R1130 22K

C1124 1uF R1131 1.6K

C1142 0.1uF

OUT:1.25V

ST 5V->3.3V->1.2V

R1128 10K
C B E Q1107 RT1C3904-T112

DC-DC CONVERTER

equal to 220uF pad size
IC1104 AZ1117H-ADJTRE1(EH11A)

IC1105 AZ1117H-3.3

ADJ/GND

R1% R1%

MAX 1A 1 2
R5% MBW3216-501TF +3.3V_USB R+3.3V_HDMI_SW 22uF

OUT:UNDER 7.22V

L1108 120OHM
IC1101 AZ1117H-ADJTRE1(EH11A)

OUTPUT READY