Ofrecido por www.electromanuales.com
Users Guide Specification

1. Model Description

MODEL32/37/42/47/52LG7500-ZB,42/50PG2500-ZA,42/50PG3500ZA,42/50PG6500-ZA,50PG4500-ZA,50PG7500-ZB 32/37/42LG3500-ZA, 32LG59-ZG,32/37/42/47/52LG5500-ZB,

MOON.C.H 08.09.05

KIM JO 08.09.05
BRAND LG Part No. MFL34441665 (0810-REV01)

SUFFIX

Product Name
32/37/42LG35**, 32LG5***,37/42/47/52LG55**, 32/37/42/47/52LG75**,42/50PG25**,42/50PG35**,42 /50PG65**,50PG45**,50PG75**

Printing Specification

1. Trim Size (Format) : 185mm x 260 mm 2. Printing Colors Cover : 1 COLOR (BLACK) Inside : 1 COLOR (BLACK) 3. Stock (Paper) Cover : Coated paper , S/W 150 g/ Inside : Uncoated paper , 60 g/ 4. Printing Method : Off-set 5. Bindery : Perfect bind 6. Language : En/Fr/Sp/Ge/It/No/Sv(7) 7. Number of pages : 132

Special Instructions

(1) Origin Notification
* LGEIN : Printed in Indonesia * LGESP : Printed in Brazil * LGEND : Printed in China * LGEMA : Printed in Poland * LGEWA : Printed in U.K. * LGEMX : Printed in Mexico * LGEIL : Printed in India

REV. NO.

Changes

10/17/08 MOON CH

MM/DD/YY

S8-32517

CHANGE NO.
Changed the O/Manual about the EPA mark.

CHANGE

CONTENTS

Pagination sheet

MFL34441665

Front cover

LG(EN)

UK only

LG(FR)

LG(SP)

LG(GE)

LG(IT)

LG(NO)

LG(SV)

Back cover
LCD TV PLASMA TV OWNERS MANUAL
LCD TV MODELS L G 3 5* * L G 5 5* * L G 3 5* * L G 7 5* * L G 3 5* * L G 7 5* * L G 5* * * L G 7 5* * L G 5 5* * L G 7 5* * L G 5 5* * L G 7 5* * L G 5 5* *
This product qualifies for ENERGY STAR in the factory default (Home mode) setting and this is the setting in which power savings will be achieved.(Plasma TV only)
PLASMA TV MODELS P G 2 5* * P G 2 5* * P G 3 5* * P G 3 5* * P G 4 5* * P G 6 5* * P G 6 5* * P G 7 5* *
Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
Extended Owners Manual that contains advanced features of these LG TV-sets is located on CD-ROM in electronic version. To read it You need to open chosen files by using Personal Computer (PC) equipped with CD-ROM drive.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 5095: 32LG5500 5096: 37LG5500 5097: 42LG5500 5442: 47LG5500 5443: 52LG5500 5602: 32LG7500 5601: 37LG7500 5603: 42LG7500 5604: 47LG7500 5605: 52LG7500 5716: 32LG3500 5717: 37LG3500 5718: 42LG3500 5720: 32LG5900 5093: 42PG6500 5094: 50PG6500 5526: 50PG4500 5527: 50PG7500 5567: 42PG3500 5566: 50PG3500 5669: 42PG2500 5670: 50PG2500
P/NO: MFL34441665 (0810-REV01) Printed in Korea

CONNECTING YOUR UNIT

Image shown may differ from your TV.

DVD/STB

COMPONENT IN

VIDEO AUDIO

VCR Connection

Power Cord

Antenna Connection
* To connect an additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section in CD Manual.

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product. In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.

ENGLISH

WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged.
Precaution in Installing the Product

WARNING

Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.

CAUTION

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
Precautions in Moving the Product
Do not use the product in damp place such as a bathroom or any place where it is likely to get wet.
- This may cause a fire or could give an electric shock.
Make sure to turn off the product. Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.

If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
Do not shock the product when moving it.
Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
Make the panel face forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center for repair.
Precautions in Using the Product
Do not disassemble, repair or modify the product at your own discretion.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product in a built-in installation such as bookcase or rack.

- Ventilation required.

- Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair.
Electrical Power Related Precautions
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not keep a still image on the screen for an extended period (e.g. by pausing a video) as the fixed image may remian visible on the screen. This is known as image burn. Image burn is not covered under the manufacturers warranty.
Do not touch the power plug with wet hands. Additionally, it the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
During a thunder or lightning storm, unplug the power cable or signal cable.
- You may be electrocuted or a fire can break out.

PREPARATION

FRONT PANEL CONTROLS
Image shown may differ from your TV. If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.

PLASMA TV Models

Remote Control Sensor POWER
Power/Standby Indicator illuminates red in standby mode. illuminates green when the TV is switched on.

- VOL +

INPUT MENU

MENUOK

- VOLVOL + +

VOLUME

PROGRAMME

LCD TV Models

+ VOL VOL
OK POWER Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates blue when the TV is switched on. Note: You can adjust Power Indicator in the

MENU INPUT

OPTION menu.
Intelligent Sensor Adjusts picture according to the surrounding conditions. (32/37/42/47/52LG5***, 32/37/42/47/52LG75** only)

BACK PANEL INFORMATION

PCMCIA CARD SLOT

HDMI IN 3

VIDEO L/MONO AUDIO R
AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT

S-VIDEO

HDMI/DVI IN 2

RGB IN (PC)

1(DVI) RS-232C IN (CONTROL & SERVICE)

AV IN 3

ANTENNA IN
Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. AUDIO IN (RGB/DVI) Connect the audio from a PC.
RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot AV (Audio/Video) IN 3 Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device.
OPTICAL DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks.
HDMI IN 1/2/3 or 4 Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. RGB IN (PC) Connect the output from a PC.

STAND INSTALLATION

(Only 32/37/42LG35**, 32/37/42LG5***, 32/37/42LG75**)
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the TV as shown.
Assemble the parts of the s t a n d b o d y with c o v e r b a s e of the TV.
Fix the 4 bolts securely using the holes in the back of the TV.

Stand Body

Cover Base
BACK COVER FOR WIRE ARRANGEMENT

Plasma TV models

42/50PG25**, 42/50PG35**, 42PG65**, 50PG45** 50PG65**, 50PG75**
Connect the cables as necessary. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section.
Install the C A B L E M A N A G E M E N T C L I P as shown.

CABLE MANAGEMENT CLIP

Fix the C a b l e H o l d e r as shown and bundle the cables.
42/50PG25**, 42/50PG35**, 50PG45**
How to remove the cable management clip Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward. For the 42PG65** model, press the center of the C A B L E M A N A G E M E N T C L I P and then lift up it.
Separate CABLE MANAGEMENT from TV by pressing two latches.

42PG65**

50PG65**/50PG75**

LCD TV models

Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section of the manual.
Open the C A B L E M A N A G E M E N T C L I P as shown and manage the cables.
Fit the C A B L E M A N A G E M E N T C L I P as shown.

! NOTE

G Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER.
You should purchase necessary components to fix the TV to the wall on the market. Position the TV close to the wall to avoid the possibility of it falling when pushed. The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen these bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV.
When moving the TV undo the cords first. Use a platform or cabinet strong and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally.

EARTHING

Ensure that you connect the earth wire to prevent possible electric shock. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit breaker
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4 (10cm) all around the TV.

4 inches

Attaching the TV to a desk (Only 32/37/42LG35**, 32/37/42LG55**, 32LG59**, 32LG75**)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. Stand
1-Screw (provided as parts of the product)

! WARNING

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4 (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall.
4 inches 4 inches 4 inches 4 inches
Not using the desk-type stand
When installing the wall-mounted unit, use the protection cover for desk-type stand installation. Insert the P R O T E C T I O N C O V E R into the TV until clicking sound. < PLASMA TV >

< LCD TV >

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

ANTENNA CONNECTION

For optimum picture quality, adjust antenna direction. I An antenna cable and converter are not supplied.

Wall Antenna Socket

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

RGB IN HDMI IN

VARIABLE AUDIO OUT

RF Coaxial Wire (75 ohm)

Outdoor Antenna (VHF, UHF)
Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

Antenna

Signal Amplifier
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above. If signal needs to be split for two TVs,use an antenna signal splitter for connection.
Use of ferrite core (This feature is not available for all models.) Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is.
Install the power plug closely.
VIDEO R AUDIO L/MONO S-VIDEO

WATCHING TV /PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
INPUT D/A TV/RADIO INPUT BRIGHT VCR SIMPLINK TEXT RATIO I/II POWER MODE TV DVD
INPUT External input mode rotate in regular sequence. Switches the TV on from standby. MENU Selects a menu. VOLUME UP /DOWN Adjusts the volume. POWER Switches the TV on from standby or off to standby. MODE Selects the remote operating modes. GUIDE Shows programme schedule. THUMBSTICK(Up/Down/Left/Right) Allows you to navigate the on-screen menus and adjust the system settings to your preference.

INFO i GUIDE

FAV VOL PR

9 Q.VIEW

7 LIST
OK Accepts your selection or displays the current mode.
Programme UP/DOWN Selects a programme. Q.VIEW Returns to the previously viewed programme.

UPDATE SLEEP SUBTITLE

INDEX HOLD

REVEAL

Installing Batteries
Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AA batteries. Do not mix old or used batteries with new ones. Close cover.

TURNING ON THE TV

- When your TV is turned on, you will be able to use its features.
Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the r / I, INPUT or PR D or E button on the TV or press the POWER, INPUT, D/A, PR + or - or NUMBER button on the remote control and the TV will switch on.
Initializing setup If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Country, Auto programme tuning.
Note: I It will automatically disappear after approx. 40 seconds unless a button is pressed. I Press the BACK button to change the current OSD to the previous OSD. < Only PLASMA TV Models > I "Home mode is the optimal setting for home environments, and is the TV's default mode. I "In Store" mode is the optimal setting for store environments. If a user modifies image quality data, In Store mode initializes the product to the image quality set by us after a certain period of time. I The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.

ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
Press the D or E or F or G button and then, O K button to select your desired language. Press the D or E button and then, O K button to select your country.
* If you want to change Language/ Country selection
Press the M E N U button and then use D or E button to select the OPTION menu.
Press the G button and then use D or E button to select Language. The menus can be shown on the screen in the selected language. Or, Press the G button and then use D or E button to select Country. Press the G button and then use F or G button to select your desired language or country. Press the O K button. The DTV auto tuning will start again when you change the country selection.
Press the E X I T button to return to normal TV viewing.
If you do not finish the set-up Installation Guide by pressing EXIT or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on. If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. The CI (Common Interface) function may not be applied based on country broadcasting circumstances. DTV mode control buttons may not function based on country broadcasting circumstances In country that Digital broadcasting regulation isn t fixed,some DTV function may not work depending on digital broadcasting circumstances.

G G G G

ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Press the M E N U button and then D or E button to display each menu. Press the G button and then D or E button to select a menu item. Change the setting of an item in the sub or pull-down menu with F or G button. You can move to a higher level menu by pressing the OK or MENU button.
SETUP G Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit Booster TIMEO Software Update OPTIONO Diagnostics SCREENO CI Information SETUPO Picture Mode G Colour Temperature TIMEO

PICTURE

Advanced Picture Reset OPTIONO Demo SCREENO TruMotion Demo

AUDIOO

Move MENU Prev.

* Only 37/42/47/52LG75**

SETUPO Auto Config. PICTUREO Manual Config. AUDIOO XGA Mode Aspect Ratio TIMEO Reset OPTIONO SCREEN
SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO Digital Audio OPTIONO SCREENO
SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Input Label OPTION G SIMPLINK SCREENO Power Indicator Factory Mode
SETUPO Clock PICTUREO Off Time AUDIOO On Time Auto Sleep TIME G Time Zone OPTIONO SCREENO
It is not possible to use ISM Method and Low power in LCD TV models. In Analogue mode, Booster, Software Update, Diagnostics and CI Information will not be displayed. G It is possible to use Power Indicator in LCD TV models only.
AUTO PROGRAMME TUNING (IN DIGITAL MODE)
Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted. When the Republic of Slovenia is selected as the country, saving channels starts from 800 while the digital TV tuning.

BACK EXIT

Press the MENU button and then D or E button to select the SETUP menu.
SETUP G Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit Booster TIMEO Software Update OPTIONO Diagnostics SCREENO CI Information
Press the G button and then D or E button to select Auto Tuning.
Press the G button to begin auto tuning. Use NUMBER buttons to input a 4-digit password in Lock System On. The message All service-information will be updated. Continue? will appear.
Auto Tuning Manual Tuning Programme Edit Booster Software Update Diagnostics CI Information
If you want to keep on auto tuning select YES using the F or G button. Then, press the OK button. Otherwise select NO.
Auto Tuning Programme(s) Programme(s) %

MENU Stop

To stop auto tuning, press the MENU button.
Press the EXIT button to return to normal TV viewing.

UHF CH.

APPENDIX

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. A Do not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges.
TO VIEW THE USER'S GUIDE ON THE CD-ROM
To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader. If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG" Open the folder "ACRORD" double-click your language. To view the User's guide The User's guide files are included in the supplied CD-ROM. Load the supplied CD-ROM into the CD-ROM drive of your PC. After a while, the web page of the CD-ROM will open automatically.(Windows users only) If the web page does not appear automatically, open the User's guide file directly. Open "My computer" Open the folder "LG" Double click the "index.htm" file.

TROUBLESHOOTING

The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
The remote control does not work
Power is suddenly turned off
Is the sleep timer set? A Check the power control settings. Has the Power supply been interrupted. A Is Auto sleep activated on this station?
The video function does not work. Check whether the TV is switched on. Try another channel. The problem may be with the broadcast. A Is the power cord inserted correctly into the mains? A Check your antenna direction and/or location. A Test the mains outlet by plugging another TV into the same outlet.

No picture &No sound

Picture appears slowly after switching on

This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.
No or poor colour or poor picture
Adjust Colour in menu option. Allow a sufficient distance between the TV and the VCR. A Try another channel. The problem may be with the broadcast. A Are the video cables installed properly? A Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures No picture when connecting HDMI
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station. Station signal is weak, reposition the antenna to receive weaker stations. A Check for sources of possible interference.
Check antenna (Change the position of the antenna). Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.
The audio function does not work.
Picture OK & No sound
Press the VOL + or - button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? Adjust Balance in menu option. A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV. Check HDMI cable over version 1.3. Check USB cable over version 2.0.
No output from one of the speakers Unusual sound from inside the TV No sound when connecting HDMI or USB
*This feature is not available for all models.
There is a problem with PICTURE settings.
When the user changes the picture settings, the TV automatically converts back to the initial settings after a certain period of time.
It means that the TV is currently set to I n S t o r e mode. To switch to H o m e mode you should do the followings: Factory Mode Factory From the TV Menu, Choose O P T I O N Reset Press O K button.(Use NUMBER buttons to input a 4-digit password. Wait for a few seconds for the TV to download again) Choose Language W Choose C o u n t r y Choose H o m e OSD "W E L C O M E" appears Press O K button. Program search will begin automatically (You can stop the search by pressing the O K button). Now, you have completed switching to the H o m e mode.