MFL34797048-en-4 3/18/08 7:26 PM Page 1
LCD TV PLASMA TV OWNERS MANUAL

LCD TV MODELS

32LG30 37LG30 42LG30 37LG50 42LG50 47LG50 52LG50 32LG70 42LG70 47LG70 52LG70

PLASMA TV MODELS

42PG25 50PG25 50PG60 60PG60
32LG60 37LG60 42LG60 47LG60 52LG60
Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ENERGY STAR is a set of power-saving guidelines issued by the U.S. Environmental Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
An extended owners manual that contains information on the advanced features of these LG TV sets is located on the CD-ROM provided in an electronic version. To read these files, you will need to use personal computer (PC) equipped with a CD-ROM drive.
P/NO : MFL34797048 (0803-REV04) Printed in Korea

www.lgusa.com

MFL34797048-en-4 3/18/08 7:26 PM Page 2

WARNING / CAUTION

To prevent fire or shock hazards, do not expose this product to rain or moisture. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

FCC NOTICE

Class B digital device This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

NOTE TO CABLE/TV INSTALLER
This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

CAUTION

Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the users authority to operate this product
MFL34797048-en-4 3/18/08 7:26 PM Page 3

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS
Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used. The important safety instructions shall be entitled Important Safety Instructions. The following safety instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety information may be included by adding statements after the end of the following safety instruction list. At the manufacturers option, a picture or drawing that illustrates the intent of a specific safety instruction may be placed immediately adjacent to that safety instruction:
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
Do not use this apparatus near water.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong, The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Clean only with dry cloth.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

You can find the desired contents easily using the bookmark.

! NOTE

If the web page does not appear automatically, open the Owner's Manual file directly. Open the My computer Open the LG Open the index.htm file.
MFL34797048-en-4 3/18/08 7:27 PM Page 6

PREPARATION

ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product. The accessories included may differ from the images below. For further information, see the the Owner's Manual files supplied CD-ROM.
TV Q. STB MEN U MEN U IN PO W ER DV VC PU T R D

RE TU RN

FLASHB K

1.5V 1.5V

Copyright 2007 LGE, All Rights Reserved.

Owners Manual

CD Manual (Refer to p.5)
* Wipe spots on the exterior only with the polishing cloth.
Remote Control, Batteries

Option Extras

Power Cord
* Do not wipe roughly when removing Polishing Cloth stain. Please be cautions of that (This feature is not available excessive pressure may cause scratch for all models.) or discoloration.

D-sub 15 pin Cable

When using the VGA (D-sub 15 pin cable) PC connection, the user must use shielded signal interface cables with ferrite cores to maintain standards compliance.

For Plasma TV models

x4 Bolts for stand assembly (Refer to P.12)

(Only 42PG25)

(Only 50PG25, 50/60PG60)

Cable Holder

Cable Management Clip
Protection Cover (Refer to P.18)
For LCD TV models 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70
(Only 32/37/42LG30, 37/42LG50, 32/42LG70) (Only 32LG30/70) or
x4 Screw for stand fixing (Refer to P.16)
Bolts for stand assembly (Refer to P.12)

32/37/42/47/52LG60

(Only 32/37LG60)

(Only 42LG60) or

32LG60: 3EA 37LG60: 4EA

2EA (M4x16)

4EA (M4x20)
Bolts for stand assembly (Refer to P.13)
MFL34797048-en-4 3/18/08 7:27 PM Page 7

FRONT PANEL INFORMATION

Image shown may differ from your TV. NOTE: If your TV has a protection tape attached, remove the tape. And then wipe the TV with a cloth (If a polishing cloth is included with your TV, use it).

Plasma TV Models

DIGITAL AUDIO OUT Digital audio output for use with amps and home theater systems. Includes an optical and/or coaxial connection. Note: In standby mode, these ports do not work. AUDIO OUT Analog audio output for use with amps and home theater systems. AV (Audio/Video) IN Analog composite connection. Supports standard definition video only (480i). S-VIDEO Better quality than standard composition. Supports standard definition video only (480i). USB INPUT Used for viewing photos and listening to MP3s. USB SERVICE ONLY or RS-232C IN (SERVICE ONLY) Used for software updates. Power Cord Socket For operation with AC power. Caution: Never attempt to operate the TV on DC power.
MFL34797048-en-4 3/18/08 7:27 PM Page 10

REMOTE CONTROL FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.
TV/STB/DVD/VCR Select the remote operating mode: TV, STB, DVD, or VCR. POWER Turns your TV or any other programmed equipment on or off, depending on the mode. Q.MENU Select the desired quick menu source. MENU Displays the main menu. Clear all on-screen displays and return to TV viewing from any menu. INPUT External input modes rotate in regular sequence. VOLUME UP Increase/decrease the sound level. /DOWN FAV Scroll through the programmed Favorite channels.

TV STB

DVD VCR INPUT

Q. MENU MENU

RETURN

AV MODE

MUTE Switch the sound on or off. CHANNEL Select available channels. UP/DOWN PAGE Move from one full set of screen information to the next one. UP/DOWN NUMBER button (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc. FLASHBK Tune to the last channel viewed.

P A G E

FLASHBK
VCR/DVD, USB, SIMPLINK Control buttons
Control video cassette recorders or DVD players. Control USB menu (PHOTO LIST and MUSIC LIST.) Control the SIMPLINK compatible devices.
MFL34797048-en-4 3/18/08 7:27 PM Page 11
THUMBSTICK Navigate the on-screen menus and adjust the system settings to your preference.
(Up/Down/Left Right/ENTER)
RETURN Allows the user to move return one step in an interactive application or other user interaction function. SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the SIMPLINK menu appears at the screen. AV MODE It helps you select and set images and sounds.

Installing Batteries

Open the battery compartment cover on the back side and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AAA batteries. Dont mix old or used batteries with new ones. Close cover.

MFL34797048-en-4 3/18/08 7:27 PM Page 12

STAND INSTALLATION

Only 42PG25
Only 32/37/42LG30, 37/42LG50, 32/42LG70
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Assemble the TV as shown.
Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV.

STAND BODY

COVER BASE
Fix the 4 bolts securely using the holes in the back of the TV.
MFL34797048-en-4 3/18/08 7:27 PM Page 13

Only 32/37/42LG60

37LG60 42LG60

32LG60

(M4x16)

(M4x20)

MFL34797048-en-4 3/18/08 7:27 PM Page 14

CABLE MANAGEMENT

Here shown may be somewhat different from your TV.

Plasma TV Model

Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
Install the CABLE MANAGEMENT CLIP as shown. If your TV has the CABLE HOLDER, install it as shown and bundle the cables.

CABLE HOLDER

CABLE MANAGEMENT CLIP
How to remove the CABLE MANAGEMENT CLIP

42PG25

50PG25, 50/60PG60
First, press the cable management. Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.
Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.
Separate C A B L E M A N A G E M E N T C L I P from TV by pressing two latches.
Do not hold the CABLE MANAGEMENT CLIP when moving the TV. - If the TV is dropped, you may be injured or the product may be broken.
MFL34797048-en-4 3/18/08 7:27 PM Page 15
LCD TV Model 32/37/42LG30, 37/42/47/52LG50, 32/42/47/52LG70 32/37/42/47/52LG60 PREPARATION
Align the hole with the tab on the C A B L E M A N A G E M E N T C L I P. Turn the C A B L E M A N A G E M E N T C L I P as shown. Note: This cable management can be broken by excessive pressure.
Install the CABLE MANAGEMENT CLIP as shown.
Put the cables inside the CABLE MANAGEMENT CLIP and snap it closed.
MFL34797048-en-4 3/18/08 7:27 PM Page 16
DESKTOP PEDESTAL INSTALLATION
Image shown may differ from your TV.
For proper ventilation, allow a clearance of 4 inches on all four sides from the wall.
4 inches 4 inches 4 inches 4 inches
Ensure adequate ventilation by following the clearance recommendations.

SWIVEL STAND

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.
ATTACHING THE TV TO A DESK (Only 32LG30/70)

Signal Amplifier
The TV will let you know when the analog, cable, and digital channel scans are complete.
MFL34797048-en-4 3/18/08 7:27 PM Page 21
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use picture for 37/42/47/52LG50.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.

Component Connection

1. How to connect
Connect the video outputs (Y, PB, PR) of the digital settop box to the C O M P O N E N T I N V I D E O 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O 1 jacks on the TV.

Y PB PR L R

2. How to use
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box. operation) Select the C o m p o n e n t 1 input source on the TV using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select the C o m p o n e n t 2 input source on the TV.

RS-232 (CONTROL &

i.e) 37/42/47/52LG50
Supported Resolutions Signal 480i 480p 720p 1080i 1080p Component Yes Yes Yes Yes Yes HDMI No Yes Yes Yes Yes
Y, CB/PB, CR/PR Resolution 720x480i 720x480p 1280x720p 1920x1080i Horizontal Frequency(KHz) 15.73 15.73 31.47 31.50 44.96 45.00 33.72 33.75 26.97 27.00 33.71 33.75 67.432 67.50 Vertical Frequency(Hz) 59.94 60.00 59.94 60.00 59.94 60.00 59.94 60.00 23.976 24.00 29.97 30.00 59.94 60.00

1920x1080p

MFL34797048-en-4 3/18/08 7:27 PM Page 22

DVD SETUP

Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O 1 jacks on the TV. Match the jack colors (Y = green, PB = blue, and PR = red). i.e) 37/42/47/52LG50
Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the TV.

DIGITA AUDIO (RGB/DVI)

REMOTE CONTROL IN OPTICA
Turn on the DVD player, insert a DVD. Select the C o m p o n e n t 1 input source on the TV using the I N P U T button on the remote control. If connected to C O M P O N E N T I N 2 input, select the C o m p o n e n t 2 input source on the TV. Refer to the DVD player's manual for operating instructions.
RS-232C I (CONTROL & SER

S-VIDEO V

HDMI Connection
Connect the HDMI output of the DVD to the H D M I / D V I I N 1, 2 , 3 or 4 jack on the TV. No separate audio connection is necessary. HDMI supports both audio and video. i.e) 37/42/47/52LG50

Del/Add/Fav USB Eject Close

Return to TV viewing.

Except 32/37/42LG30
ON-SCREEN MENUS SELECTION
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

PICTURE

1 MENU 2
Display each menu. Select a menu item.

OPTION

Enter to the pop up menu.

4 MENU

CHANNEL PICTURE AUDIO

Move ENTER

All available TV channels are searched and stored automatically. User can do manual channel selection and add or delete individual channels. You can add or delete in the channel list.
MFL34797048-en-4 3/18/08 7:27 PM Page 28
Aspect Ratio : 16:9 Picture Mode : Standard Backlight Contrast Brightness Sharpness Color Tint

Aspect Ratio

Select the desired picture format: Set by program, 4:3, 1 6:9, Zoom1, Zoom2, Just Scan.

Picture Mode

Select the Intelligent Sensor (Except 32/37/42LG30, Plasma TV), Vivid, Standard, Cinema/ Cinema (Only for 50/60PG60), Sport, Game, Expert1, Expert2. I Adjust the Backlight (Only LCD TV), Contrast, Brightness, Sharpness, Color, Tint. I Advanced Control: Adjust the Color Temperature, Fresh Contrast, Fresh Color, Noise Rreduction, Gamma, Black Level, Eye Care (Only LCD TV), Real Cinema (For LCD TV) / Film Mode (For Plasma TV), TruMotion (Only 32/37/42/47/52LG60, 32/42/47/52LG70). I Reset: Settings of the selected picture modes return to the default factory settings.
Auto Volume Clear Voice Balance Sound Mode : Standard SRS TruSurround XT: Off Treble Bass Reset

Screen (RGB-PC)

(32/37/42/47/52LG60, 32/42/47/52LG70 Only)
Adjust the screen Resolution, Auto config, Position, Size, Phase, Reset. Use this feature to see the difference TruMotion makes.

TruMotion Demo

Auto Volume Clear Voice Balance

: Off : On 0

Auto Volume makes sure that the volume level remains consistent whether you are watching a commercial or a regular TV program. By differentiating the human sound range from others, it helps users listen to human voices better. Adjust the left/right sound of speaker. Select the Standard, Music, Cinema, Sport, and Game.

Sound Mode

SRS TruSurround XT, Treble, Bass: Adjust the sound to suit your taste and room situations. I Reset: Settings of the selected Sound Mode return to the default factory settings.

TV Speaker

Turn the TV speaker On or off.
Clock Off Time On Time : Off : Off

: Feb/21/2008 2:10 AM

Sleep Timer : Off Auto Sleep : Off
Auto: The time is set automatically from a digital channel signal. Select your viewing area time zone. Select Auto, Off, On depending on whether or not your viewing area observes Daylight Saving time. I Manual: Set the clock manually.
Off Time On Time Sleep Timer Auto Sleep
Select On or Off. Select On or Off. Select the amount of time before your TV turns off automatically: Off, 10, 20, 30, 60, 90, 120, 1 240. 80, TV will be automatically turned off, in case of no signal for 10 minutes.
MFL34797048-en-4 3/18/08 7:27 PM Page 29
Language Input Label SIMPLINK Key Lock Caption ISM Method Power Saving Set ID

Language Input Label

: English : On : Off : Off : Normal : Level 0 :1

SIMPLINK key Lock

Caption
ISM Method (Plasma TV only) Power Saving (Plasma TV only) Set ID (Except 32/37/42/47/52LG60) Power Indicator (LCD TV only) LOCK
Lock System Set Password Block Channel Movie Rating TV Rating-Children TV Rating-General Downloadable Rating Input Block
Select your desired language for on screen menus : English, Spanish, French. I Set a label to each input source. I Control and play other AV devices connected to the TV through HDMI cable without additional cables and settings. I This feature can be used to prevent unauthorized viewing by locking out the front panel controls. I When selecting Off, Submenus for Analog, DTV, and Digital Option become disabled. I Analog: CC1~ CC4 , Text1~ Text4. I Digital: CC1~ CC4 , Text1~ Text4, Service1~ Service6. I Digital Option: Customize the DTV/CADTV captions that appear on your screen. I Use it to minimize any fixed image on the screen. : Normal, Orbiter, Inversion, White Wash. I Reduces the plasma display power consumption.
Choose the desired TV ID number. Adjust Power Indicator menu options. After turning on the TV, adjust Mode, Time, Language, Auto Tuning. Select On or Off. Change the password. Select a channel number that you wish to block. Blocks movies according to the movie ratings limits specified. Prevents children from watching certain children's TV programs, according to the ratings limit set. Based on the ratings, blocks certain TV programs that you and your family do not want to view. Selecting canadian english language rating system. Selecting canadian french language rating system. This function may become available in the future and will be available only for digital channel signal. Enables you to select a source to block from the external source devices you have hooked up.

Initial Setting

Lock System Set Password Block Channel Movie Rating TV Rating-Children

I I I I

For USA
Lock System Set Password Block Channel TV Rating-English TV Rating-French Downloadable Rating Input Block
TV Rating-General TV Rating-English TV Rating-French Downloadable Rating Input Block

: Off I I I

For Canada INPUT
Antenna Cable AV1 AV2 Component1 Component2 RGB-PC HDMI1
Input (Except 32/37/42LG30) Select desired input sources. I Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.

PHOTO LIST MUSIC LIST

USB (Except 32/37/42LG30)
Use PHOTO LIST or MUSIC LIST.
MFL34797048-en-4 3/18/08 7:27 PM Page 30
* This feature is only for 37/42/47/52LG50, 32/37/42/47/52LG60, 32/42/47/52LG70, Plasma TV.

ENTRY MODES

When you connect a USB device, this screen is displayed automatically. In USB device, you can not add a new folder or delete the existing folder.
1 Connect the USB device to the U S B

jacks on the side of TV.

It doesnt support USB HDD This TV supports JPG and MP3.
When removing the USB device
Select the U S B E j e c t menu before removing the USB device.
Select P H O T O L I S T or M U S I C L I S T.

DMI IN 3

1Q. MENU 2

Select U S B E j e c t.

PHOTO LIST

MUSIC LIST

Precautions when using the USB device

G G G G G G G

Only a USB storage device is recognizable. If the USB storage device is connected through a USB hub, the device is not recognizable. A USB storage device using an automatic recognition program may not be recognized. A USB storage device which uses its own driver may not be recognized. In case of a card reader, up to four memory cards are concurrently recognizable. The recognition speed of a USB storage device may depend on each device. Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files.
Please use only a USB storage device which was formatted as a FAT or NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized. Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. Some USB storage devices may not be supported or operated smoothly. File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English characters. Please backup important files because data on USB device may be damaged. Data management is consumer's responsibility and as a result, the manufacturer does not cover data damage.

1/17 Sideshow BGM Delete Option Hide
The aspect ratio of a photo may change the size of the photo displayed on the screen in full size.
Press F G to set the time interval between slides. Slide Speed Music Folder ENTER Fast. Cancel
This TV will not be able to decode most JPG images saved using the Progressive option.
MFL34797048-en-4 3/18/08 7:27 PM Page 33
You can use the Music List menu to play MP3 files form a USB storage device. This TV cannot play back copy-protected files. The On Screen Display on your model may be slightly different.
Supported music file: *.MP3 Bit rate range 40Kbps ~ 320Kbps Sampling rate (Sampling Frequency) MPEG1 : 32000, 44100, 48000Hz MPEG2 : 16000, 24000, 22050Hz MPEG2.5 : 16 ~ 48KHz
Select M U S I C L I S T.
Moves to upper level file Preview: If any album jacket for the file exists, this jacket is displayed. Current page/Total pages Total number of marked musics Usable USB memory Corresponding buttons on the remote control
Page 1/1 Drive1 Arirang Upper Arirang Good Bye 04:12 05:30 No Marked Title
Free Space 150MB Play Time

3945 KB, 128 Kbps

MFL34797048-en-4 3/18/08 7:27 PM Page 34
Music Selection and Popup Menu
Up to 6 music titles are listed per page.

Arirang

USB Device Page 1/1 No Marked
Title Upper Arirang Good Bye 04:12 05:30

Play Time

Select the desired musics.

show the PopUp menu.

Page 1/1 No Marked

Title Upper Arirang

USB Device Free Space 150MB

4 5RETURN

Select the desired PopUp menu.

3945 KB 128 Kbps

Good Bye
Play Play with Photo Mark All Delete Cancel

3945 KB, 128 Kbps Upper

Use the C H button to navigation in the music page. I Use F A V button to mark or unmark a music file. If no music is marked, all the music in the folder will be played in sequence. When one or more music files are marked, the marked music files will be played in sequence. If you want to listen to only one song repeatedly, just mark that one file and play.
The play information box (as shown below) will automatically move across the screen when there is no user input to prevent a fixed image remaining on the screen for a extended period of time.
P l a y (During stop): Play the selected music. Once a song finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the E N T E R button, the current music in playback will stop. G P l a y M a r k e d: Play the selected musics. Once a music finishes playing, the next selected one will be played automatically. S t o p P l a y (During playback): Stop the playG ing musics. P l a y w i t h P h o t o: Start playing the selected G musics and then move to the Photo List. G M a r k A l l: Mark all musics in the folder. G U n m a r k A l l: Deselect all marked music. G D e l e t e: Delete the selected music. G C a n c e l: Close the pop-up menu.

G G G G G

When music is playing, is displayed in front of the music play time. A damaged or corrupted music file that does not play displays 00:00 as the play time. Music files with copy-protection will not play. Press E N T E R, A , or R E T U R N button to stop the screen saver. This TV can not play music files less than 16 Kbytes.
MFL34797048-en-4 3/18/08 7:27 PM Page 35

TROUBLESHOOTING

The operation does not work normally.
The remote control doesnt work
Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. I Ensure that the batteries are installed with correct polarity (+ to +, - to -). I Ensure that the correct remote operating mode is set: TV, VCR etc. I Install new batteries.
Power is suddenly turned off
Is the sleep timer set? Check the power control settings. Power interrupted.
The video function does not work. Check whether the product is turned on. Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet? I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in.

No picture &No sound

Picture appears slowly after switching on
This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes.
No or poor color or poor picture
Adjust Color in menu option. Keep a sufficient distance between the product and the VCR. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly? I Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station. I Check for sources of possible interference.
Check antenna (Change the direction of the antenna). Check HDMI cable over version 1.3. The HDMI cables dont support HDMI version 1.3, it cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.
No picture when connecting HDMI
MFL34797048-en-4 3/18/08 7:27 PM Page 36
The audio function does not work. Press the VOL or VOLUME button. Sound muted? Press MUTE button. I Try another channel. The problem may be with the broadcast. I Are the audio cables installed properly?
Picture OK & No sound

No output from one of the speakers Unusual sound from inside the product No sound when connecting HDMI or USB
Adjust Balance in menu option. A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
Check HDMI cable over version 1.3. Check USB cable over version 2.0. I Use normal MP3 file.
There is a problem in PC mode. (Only PC mode applied) The signal is out of range Vertical bar or stripe on background & Horizontal Noise & Incorrect position Screen color is unstable or single color
Adjust resolution, horizontal frequency, or vertical frequency. Check the input source. Work the Auto configure or adjust clock, phase, or H/V position. (Option)
Check the signal cable. Reinstall the PC video card.

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

Heres a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until its almost dry, and then use it to wipe the screen. Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges.
MFL34797048-en-4 3/18/08 7:27 PM Page 37

PRODUCT SPECIFICATIONS

MODELS Dimensions (Width x Height x Depth) With stand Without stand 32LG30 (32LG30-UA) (32LG30-UD) 31.5 x 23.7 x 8.9 inches 801.8 x 604.2 x 227 mm.3 31.5 x 21.4 x 3.1 inches 801.8 x 544.1 x 79.0 mm 29.5 pounds / 13.4 kg 26.2 pounds / 1 kg 1.9 37LG30 (37LG30-UA) (37LG30-UD) 42LG30 (42LG30-UA) (42LG30-UD)

MFL34797048-en-4 3/18/08 7:27 PM Page 39
MODLES Dimensions (Width x Height x Depth) With stand Without stand
42PG25 (42PG60-UA) 41.1 x 28.9 x 12.1 inches 1044.4 x 735.4 x 308.0 mm 41.1 x 26.7 x 3.1 inches 1044.4 x 680.6 x 79.6 mm 61.7 pounds / 28.0 kg 55.1 pounds / 25.0 kg 50PG60 (50PG60F-UA) 48.6 x 33.4 x 14.3 inches 1235.6 x 849.3 x 364.1 mm 48.6 x 31.2 x 3.1 inches 1235.6 x 792.8 x 79.6 mm 100.7 pounds / 45.7 kg 91.9 pounds / 41.7 kg
50PG25 (50PG60-UA) 48.6 x 33.4 x 14.3 inches 1235.6 x 849.3 x 364.1 mm 48.6 x 31.2 x 3.1 inches 1235.6 x 792.8 x 79.6 mm 96.3 pounds / 43.7 kg 87 pounds / 39.7 kg.5 60PG60 (60PG60F-UA) 57 x 38.8 x 16.3 inches.3 1455.0 x 985.0 x 414.0 mm 57 x 36.4 x 3.3 inches.3 1455.0 x 924.8 x 84.1 mm 137 pounds / 62.4 kg.5 121.0 pounds / 54.9 kg
With stand Without stand MODLES
OPEN SOURCE SOFTWARE NOTICE - This feature is not available for all
The following GPL executables and LGPL/MPL libraries used in this product are subject to the GPL/LGPL/MPL License Agreements: GPL EXECUTABLES: I Linux kernel 2.6.12 I busybox LGPL LIBRARIES: I uclibc MPL LIBRARIES: I Nanox LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of

models.

performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: Opensource@lge.com This offer is valid for a period of three(3) years from the date of the distribution of this product by LG Electronics. You can obtain a copy of the GPL, LGPL and MPL licenses on the CD-ROM provided with this product. This software is based in part on the work of the Independent JPEG Group. I This software includes the Zlib compression library, developed by Jean-loup Gailly and Mark Adler. Copyright (C) 1995-2005 Jean-loup Gailly and Mark Adler
MFL34797048-en-4 3/18/08 7:27 PM Page 40