Ofrecido por www.electromanuales.com
Users Guide Specification

1. Model Description

MODEL32/37/42/47/52LG7500-ZB,42/50PG2500-ZA,42/50PG3500ZA,42/50PG6500-ZA,50PG4500-ZA,50PG7500-ZB 32/37/42LG3500-ZA, 32LG59-ZG,32/37/42/47/52LG5500-ZB,

MOON.C.H 08.09.05

KIM JO 08.09.05
BRAND LG Part No. MFL34441665 (0810-REV01)

SUFFIX

Product Name
32/37/42LG35**, 32LG5***,37/42/47/52LG55**, 32/37/42/47/52LG75**,42/50PG25**,42/50PG35**,42 /50PG65**,50PG45**,50PG75**

Printing Specification

1. Trim Size (Format) : 185mm x 260 mm 2. Printing Colors Cover : 1 COLOR (BLACK) Inside : 1 COLOR (BLACK) 3. Stock (Paper) Cover : Coated paper , S/W 150 g/ Inside : Uncoated paper , 60 g/ 4. Printing Method : Off-set 5. Bindery : Perfect bind 6. Language : En/Fr/Sp/Ge/It/No/Sv(7) 7. Number of pages : 132

Special Instructions

(1) Origin Notification
* LGEIN : Printed in Indonesia * LGESP : Printed in Brazil * LGEND : Printed in China * LGEMA : Printed in Poland * LGEWA : Printed in U.K. * LGEMX : Printed in Mexico * LGEIL : Printed in India

REV. NO.

Changes

10/17/08 MOON CH

MM/DD/YY

S8-32517

CHANGE NO.
Changed the O/Manual about the EPA mark.

CHANGE

CONTENTS

Pagination sheet

MFL34441665

Front cover

LG(EN)

UK only

LG(FR)

LG(SP)

LG(GE)

LG(IT)

LG(NO)

LG(SV)

Back cover
LCD TV PLASMA TV OWNERS MANUAL
LCD TV MODELS L G 3 5* * L G 5 5* * L G 3 5* * L G 7 5* * L G 3 5* * L G 7 5* * L G 5* * * L G 7 5* * L G 5 5* * L G 7 5* * L G 5 5* * L G 7 5* * L G 5 5* *
This product qualifies for ENERGY STAR in the factory default (Home mode) setting and this is the setting in which power savings will be achieved.(Plasma TV only)
PLASMA TV MODELS P G 2 5* * P G 2 5* * P G 3 5* * P G 3 5* * P G 4 5* * P G 6 5* * P G 6 5* * P G 7 5* *
Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
Extended Owners Manual that contains advanced features of these LG TV-sets is located on CD-ROM in electronic version. To read it You need to open chosen files by using Personal Computer (PC) equipped with CD-ROM drive.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 5095: 32LG5500 5096: 37LG5500 5097: 42LG5500 5442: 47LG5500 5443: 52LG5500 5602: 32LG7500 5601: 37LG7500 5603: 42LG7500 5604: 47LG7500 5605: 52LG7500 5716: 32LG3500 5717: 37LG3500 5718: 42LG3500 5720: 32LG5900 5093: 42PG6500 5094: 50PG6500 5526: 50PG4500 5527: 50PG7500 5567: 42PG3500 5566: 50PG3500 5669: 42PG2500 5670: 50PG2500
P/NO: MFL34441665 (0810-REV01) Printed in Korea

CONNECTING YOUR UNIT

Image shown may differ from your TV.

DVD/STB

COMPONENT IN

VIDEO AUDIO

VCR Connection

Power Cord

Antenna Connection
* To connect an additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section in CD Manual.

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product. In this manual, the illustration may be somewhat different from your product because it is just example to help the instruction.

ENGLISH

WARNING If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death. CAUTION If you ignore the caution message, you may be slightly injured or the product may be damaged.
Precaution in Installing the Product

WARNING

Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.

CAUTION

Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.

Precautions in Moving the Product
Do not use the product in damp place such as a bathroom or any place where it is likely to get wet.
- This may cause a fire or could give an electric shock.
Make sure to turn off the product. Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
Do not shock the product when moving it.
Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
Make the panel face forward and hold it with both hands to move.
- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center for repair.
Precautions in Using the Product
Do not disassemble, repair or modify the product at your own discretion.
Keep the product away from direct sunlight.
- The product can be damaged.
Do not place the product in a built-in installation such as bookcase or rack.

- Ventilation required.

- Fire or electric shock accident can occur. - Contact the service center for check, calibration or repair.
Electrical Power Related Precautions
Make sure to connect the power cable to the grounded current.
- You may be electrocuted or injured.
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Do not keep a still image on the screen for an extended period (e.g. by pausing a video) as the fixed image may remian visible on the screen. This is known as image burn. Image burn is not covered under the manufacturers warranty.
Do not touch the power plug with wet hands. Additionally, it the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.
- You may be electrocuted due to excess moisture.
During a thunder or lightning storm, unplug the power cable or signal cable.

- You may be electrocuted or a fire can break out.

PREPARATION

FRONT PANEL CONTROLS
Image shown may differ from your TV. If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.

PLASMA TV Models

Remote Control Sensor POWER
Power/Standby Indicator illuminates red in standby mode. illuminates green when the TV is switched on.

- VOL +

INPUT MENU

MENUOK

- VOLVOL + +

VOLUME

PROGRAMME

LCD TV Models

+ VOL VOL
OK POWER Remote Control Sensor Power/Standby Indicator illuminates red in standby mode. illuminates blue when the TV is switched on. Note: You can adjust Power Indicator in the

MENU INPUT

OPTION menu.
Intelligent Sensor Adjusts picture according to the surrounding conditions. (32/37/42/47/52LG5***, 32/37/42/47/52LG75** only)

BACK PANEL INFORMATION

PCMCIA CARD SLOT

HDMI IN 3

VIDEO L/MONO AUDIO R
AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT

S-VIDEO

HDMI/DVI IN 2

RGB IN (PC)

1(DVI) RS-232C IN (CONTROL & SERVICE)

AV IN 3

ANTENNA IN
Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. AUDIO IN (RGB/DVI) Connect the audio from a PC.
RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot AV (Audio/Video) IN 3 Connect audio/video output from an external device to these jacks. S-VIDEO Connect S-Video out from an S-VIDEO device.
OPTICAL DIGITAL AUDIO OUT Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks.
HDMI IN 1/2/3 or 4 Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable. RGB IN (PC) Connect the output from a PC.

STAND INSTALLATION

(Only 32/37/42LG35**, 32/37/42LG5***, 32/37/42LG75**)
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

Assemble the TV as shown.
Assemble the parts of the s t a n d b o d y with c o v e r b a s e of the TV.
Fix the 4 bolts securely using the holes in the back of the TV.

Stand Body

Cover Base
BACK COVER FOR WIRE ARRANGEMENT

Plasma TV models

42/50PG25**, 42/50PG35**, 42PG65**, 50PG45** 50PG65**, 50PG75**
Connect the cables as necessary. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section.
Install the C A B L E M A N A G E M E N T C L I P as shown.

CABLE MANAGEMENT CLIP

Fix the C a b l e H o l d e r as shown and bundle the cables.
42/50PG25**, 42/50PG35**, 50PG45**
How to remove the cable management clip Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward. For the 42PG65** model, press the center of the C A B L E M A N A G E M E N T C L I P and then lift up it.
Separate CABLE MANAGEMENT from TV by pressing two latches.

42PG65**

50PG65**/50PG75**

LCD TV models

Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section of the manual.
Open the C A B L E M A N A G E M E N T C L I P as shown and manage the cables.
Fit the C A B L E M A N A G E M E N T C L I P as shown.

! NOTE

G Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.
PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOES NOT FALL OVER.
You should purchase necessary components to fix the TV to the wall on the market. Position the TV close to the wall to avoid the possibility of it falling when pushed. The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen these bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall and the TV.
When moving the TV undo the cords first. Use a platform or cabinet strong and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally.

EARTHING

Ensure that you connect the earth wire to prevent possible electric shock. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit breaker
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4 (10cm) all around the TV.

4 inches

Attaching the TV to a desk (Only 32/37/42LG35**, 32/37/42LG55**, 32LG59**, 32LG75**)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw. Stand
1-Screw (provided as parts of the product)

! WARNING

To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4 (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall.
4 inches 4 inches 4 inches 4 inches
Not using the desk-type stand
When installing the wall-mounted unit, use the protection cover for desk-type stand installation. Insert the P R O T E C T I O N C O V E R into the TV until clicking sound. < PLASMA TV >

< LCD TV >

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

ANTENNA CONNECTION

For optimum picture quality, adjust antenna direction. I An antenna cable and converter are not supplied.

Wall Antenna Socket

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

RGB IN HDMI IN

VARIABLE AUDIO OUT

RF Coaxial Wire (75 ohm)

Outdoor Antenna (VHF, UHF)
Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

Antenna

Signal Amplifier
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above. If signal needs to be split for two TVs,use an antenna signal splitter for connection.
Use of ferrite core (This feature is not available for all models.) Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is.
Install the power plug closely.
VIDEO R AUDIO L/MONO S-VIDEO
WATCHING TV /PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.

INPUT D/A TV/RADIO INPUT BRIGHT VCR SIMPLINK TEXT RATIO I/II POWER MODE TV DVD
INPUT External input mode rotate in regular sequence. Switches the TV on from standby. MENU Selects a menu. VOLUME UP /DOWN Adjusts the volume. POWER Switches the TV on from standby or off to standby. MODE Selects the remote operating modes. GUIDE Shows programme schedule. THUMBSTICK(Up/Down/Left/Right) Allows you to navigate the on-screen menus and adjust the system settings to your preference.

INFO i GUIDE

FAV VOL PR

9 Q.VIEW

7 LIST
OK Accepts your selection or displays the current mode.
Programme UP/DOWN Selects a programme. Q.VIEW Returns to the previously viewed programme.

UPDATE SLEEP SUBTITLE

INDEX HOLD

REVEAL

Installing Batteries
Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AA batteries. Do not mix old or used batteries with new ones. Close cover.

TURNING ON THE TV

- When your TV is turned on, you will be able to use its features.
Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the r / I, INPUT or PR D or E button on the TV or press the POWER, INPUT, D/A, PR + or - or NUMBER button on the remote control and the TV will switch on.
Initializing setup If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Country, Auto programme tuning.
Note: I It will automatically disappear after approx. 40 seconds unless a button is pressed. I Press the BACK button to change the current OSD to the previous OSD. < Only PLASMA TV Models > I "Home mode is the optimal setting for home environments, and is the TV's default mode. I "In Store" mode is the optimal setting for store environments. If a user modifies image quality data, In Store mode initializes the product to the image quality set by us after a certain period of time. I The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
Press the D or E or F or G button and then, O K button to select your desired language. Press the D or E button and then, O K button to select your country.
* If you want to change Language/ Country selection
Press the M E N U button and then use D or E button to select the OPTION menu.
Press the G button and then use D or E button to select Language. The menus can be shown on the screen in the selected language. Or, Press the G button and then use D or E button to select Country. Press the G button and then use F or G button to select your desired language or country. Press the O K button. The DTV auto tuning will start again when you change the country selection.

Press the E X I T button to return to normal TV viewing.
If you do not finish the set-up Installation Guide by pressing EXIT or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on. If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. The CI (Common Interface) function may not be applied based on country broadcasting circumstances. DTV mode control buttons may not function based on country broadcasting circumstances In country that Digital broadcasting regulation isn t fixed,some DTV function may not work depending on digital broadcasting circumstances.

G G G G

ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Press the M E N U button and then D or E button to display each menu. Press the G button and then D or E button to select a menu item. Change the setting of an item in the sub or pull-down menu with F or G button. You can move to a higher level menu by pressing the OK or MENU button.
SETUP G Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit Booster TIMEO Software Update OPTIONO Diagnostics SCREENO CI Information SETUPO Picture Mode G Colour Temperature TIMEO

PICTURE

Advanced Picture Reset OPTIONO Demo SCREENO TruMotion Demo

AUDIOO

Move MENU Prev.

* Only 37/42/47/52LG75**

SETUPO Auto Config. PICTUREO Manual Config. AUDIOO XGA Mode Aspect Ratio TIMEO Reset OPTIONO SCREEN
SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO Digital Audio OPTIONO SCREENO
SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Input Label OPTION G SIMPLINK SCREENO Power Indicator Factory Mode
SETUPO Clock PICTUREO Off Time AUDIOO On Time Auto Sleep TIME G Time Zone OPTIONO SCREENO
It is not possible to use ISM Method and Low power in LCD TV models. In Analogue mode, Booster, Software Update, Diagnostics and CI Information will not be displayed. G It is possible to use Power Indicator in LCD TV models only.
AUTO PROGRAMME TUNING (IN DIGITAL MODE)
Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted. When the Republic of Slovenia is selected as the country, saving channels starts from 800 while the digital TV tuning.

BACK EXIT

Press the MENU button and then D or E button to select the SETUP menu.
SETUP G Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit Booster TIMEO Software Update OPTIONO Diagnostics SCREENO CI Information
Press the G button and then D or E button to select Auto Tuning.
Press the G button to begin auto tuning. Use NUMBER buttons to input a 4-digit password in Lock System On. The message All service-information will be updated. Continue? will appear.
Auto Tuning Manual Tuning Programme Edit Booster Software Update Diagnostics CI Information
If you want to keep on auto tuning select YES using the F or G button. Then, press the OK button. Otherwise select NO.
Auto Tuning Programme(s) Programme(s) %

MENU Stop

To stop auto tuning, press the MENU button.
Press the EXIT button to return to normal TV viewing.

UHF CH.

APPENDIX

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV. Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. A Do not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges.
TO VIEW THE USER'S GUIDE ON THE CD-ROM
To view the User's guide on the CD-ROM, Adobe Acrobat Reader must be installed on your PC. The "ACRORD" folder on the CD-ROM contains the installation program for Acrobat Reader. If you want to install Acrobat Reader, Open "My Computer" Open the folder "LG" Open the folder "ACRORD" double-click your language. To view the User's guide The User's guide files are included in the supplied CD-ROM. Load the supplied CD-ROM into the CD-ROM drive of your PC. After a while, the web page of the CD-ROM will open automatically.(Windows users only) If the web page does not appear automatically, open the User's guide file directly. Open "My computer" Open the folder "LG" Double click the "index.htm" file.

TROUBLESHOOTING

The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
The remote control does not work
Power is suddenly turned off
Is the sleep timer set? A Check the power control settings. Has the Power supply been interrupted. A Is Auto sleep activated on this station?
The video function does not work. Check whether the TV is switched on. Try another channel. The problem may be with the broadcast. A Is the power cord inserted correctly into the mains? A Check your antenna direction and/or location. A Test the mains outlet by plugging another TV into the same outlet.

No picture &No sound

Picture appears slowly after switching on
This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.
No or poor colour or poor picture
Adjust Colour in menu option. Allow a sufficient distance between the TV and the VCR. A Try another channel. The problem may be with the broadcast. A Are the video cables installed properly? A Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures No picture when connecting HDMI
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station. Station signal is weak, reposition the antenna to receive weaker stations. A Check for sources of possible interference.
Check antenna (Change the position of the antenna). Check HDMI cable over version 1.3. If the HDMI cables dont support HDMI version 1.3, it can cause flickers or no screen display. In this case use the latest cables that support HDMI version 1.3.
The audio function does not work.
Picture OK & No sound
Press the VOL + or - button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? Adjust Balance in menu option. A change in ambient humidity or temperature may result in an unusual noise when the TV is switched on or off and does not indicate a fault with the TV. Check HDMI cable over version 1.3. Check USB cable over version 2.0.
No output from one of the speakers Unusual sound from inside the TV No sound when connecting HDMI or USB
*This feature is not available for all models.
There is a problem with PICTURE settings.

When the user changes the picture settings, the TV automatically converts back to the initial settings after a certain period of time.
It means that the TV is currently set to I n S t o r e mode. To switch to H o m e mode you should do the followings: Factory Mode Factory From the TV Menu, Choose O P T I O N Reset Press O K button.(Use NUMBER buttons to input a 4-digit password. Wait for a few seconds for the TV to download again) Choose Language W Choose C o u n t r y Choose H o m e OSD "W E L C O M E" appears Press O K button. Program search will begin automatically (You can stop the search by pressing the O K button). Now, you have completed switching to the H o m e mode.

WEIGHT

MODELS 32LG5*** 32LG5500-ZB 32LG5900-ZG
1 kg / 31.1 lbs 4.kg / 27 lbs 2.6.8

37LG55** 37LG5500-ZB

1 kg / 40.4 lbs 8.kg / 34.4 lbs 5.6

42LG55** 42LG5500-ZB

22.5 kg / 49.6 lbs 20.0 kg / 44.1 lbs

Weight

with stand without stand MODELS

47LG55** 47LG5500-ZB

52LG55** 52LG5500-ZB
39.5 kg / 87 lbs.1 34.9 kg / 77 lbs.0

42PG35** 42PG3500-ZA

28.0 kg / 61.8 lbs 25.0 kg / 55.1 lbs
29.2 kg / 64.4 lbs 24.6 kg / 54.3 lbs

50PG35** 50PG3500-ZA

42PG65** 42PG6500-ZA
27 kg / 61.3 lbs.kg / 55.2 lbs

50PG65** 50PG6500-ZA

43.7 kg / 96.4 lbs 39.7 kg / 87 lbs.6

with stand without stand

42.3 kg / 93.3 lbs 38.3 kg / 84.5 lbs

MODELS

50PG45** 50PG4500-ZA

50PG75** 50PG7500-ZB

45.7 kg / 100.8 lbs 41.7 kg / 92.0 lbs

42PG25** 42PG2500-ZA

50PG25** 50PG2500-ZA

32LG75** 32LG7500-ZB

1 kg / 29.4 lbs 3.kg / 26.1 lbs 1.8

37LG75** 37LG7500-ZB

1 kg / 41.1 lbs 8.kg / 35.3 lbs 6.0

42LG75** 42LG7500-ZB

47LG75** 47LG7500-ZB
30.0 kg / 66.2 lbs 25.3 kg / 55.8 lbs

52LG75** 52LG7500-ZB

39.9 kg / 88.0 lbs 35.2 kg / 77 lbs.7
22.4 kg / 49.4 lbs 19.8 kg / 43.7 lbs

32LG35** 32LG3500-ZA

1 kg / 29.6 lbs 3.kg / 26.3 lbs 1.9

37LG35** 37LG3500-ZA

1 kg / 41.5 lbs 8.kg / 35.7 lbs 6.2

42LG35** 42LG3500-ZA

23.6 kg / 52.1 lbs 21.0 kg / 46.3 lbs
The specifications shown above may be changed without prior notice for quality improvement.

Ofrecido por www.electromanuales.com
LCD TV PLASMA TV OWNERS MANUAL
PLASMA TV MODELS P G 2 5* * P G 2 5* * P G 3 5* * P G 3 5* * P G 4 5* * P G 6 5* * P G 6 5* * P G 7 5* * Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service. LCD TV MODELS L G 3 5* * L G 5 5* * L G 3 5* * L G 7 5* * L G 3 5* * L G 7 5* * L G 5* * * L G 7 5* * L G 5 5* * L G 7 5* * L G 5 5* * L G 7 5* * L G 5 5* *
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 5095: 32LG5500 5096: 37LG5500 5097: 42LG5500 5442: 47LG5500 5443: 52LG5500 5602: 32LG7500 5601: 37LG7500 5603: 42LG7500 5604: 47LG7500 5605: 52LG7500 5716: 32LG3500 5717: 37LG3500 5718: 42LG3500 5720: 32LG5900 5093: 42PG6500 5094: 50PG6500 5526: 50PG4500 5527: 50PG7500 5567: 42PG3500 5566: 50PG3500 5669: 42PG2500 5670: 50PG2500
This product qualifies for ENERGY STAR in the factory default (Home mode) setting and this is the setting in which power savings will be achieved.(Plasma TV only)
This product incorporates copy protection technology that is protected by U.S. and foreign patents, including patent numbers 5,315,448 and 6,836,549, and other intellectual property rights. The use of Macrovisions copy protection technology in the product must be authorized by Macrovision. Reverse engineering or disassembly is prohibited.

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

Owners Manual

Power Cord

Batteries

IN PU D/A T TV/RA INPU DIO T SIM PLINK TE XT RA TIO I/II BA CK M EN U VC R BR IG HT DV D PO W

M O D TV E

INFO i GU IDE

FA V PR

7 LIST
UPDA TE SUBT ITLE SL EE P HO LD RE VE AL INDE X TIM E

9 Q.VIE W 3

Protection Cover Remote Control
PLASMA TV models (50PG65**, 50PG75** only) (42/50PG25**, 42/50PG35**, 50PG45** only)

Cable management clip

Cable Holder (42PG25**/ 42PG35**/ 42PG65**: 1EA, 50PG25**/ 50PG35**/ 50PG45**: 2EA)
(This feature is not available for all models.)

Ferrite Core

LCD TV models (32/37/42LG35**, 32/37/42LG55**, 32LG59**, 32LG75** only)

Polishing Cloth

Polishing cloth for use on the screen.
Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Do not use excessive force. This may cause scratching or discolouration.
1-screw for stand fixing (Refer to p.5)
Bolts for stand assembly (Refer to p.8)
Use of ferrite core (This feature is not available for all models.) Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord. The closer the location of the ferrite core to the power plug, the better it is.
Install the power plug closely.

CONTENTS

PREPARATION
Front Panel Controls. 4 Back Panel Information. 6 Stand Installation. 8 Please set it up carefully so the product does not fall over. 9 Back Cover for Wire Arrangement. 10 Desktop Pedestal Installation. 12 Wall Mount: Horizontal installation. 12 Antenna Connection. 13
Fine Tuning (In Analogue Mode). 46 Assigning a Station Name (In Analogue Mode). 46 Programme Edit (In Analogue Mode). 47 Selecting the Programme Table. 49 Input Source Selection. 50 SIMPLINK Function. 51
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
Switch on/off EPG. 53 Select programme. 53 Button function in NOW/NEXT guide mode. 54 Button Function in 8 Day Guide Mode. 54 Button function in date change mode. 54 Button function in extended description box. 55 Button function in record/remind setting mode. 55 Button function in timer list mode. 55

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup. 14 DVD Setup. 16 VCR Setup. 19 Digital Audio Out Setup. 22 Insertion of CI module. 22 Other A/V Source Setup. 23 PC Setup. 24 - Screen Setup for PC Mode. 27

PICTURE CONTROL

Picture Size (Aspect Ratio) Control. 56 Preset Picture Settings - Picture Mode-Preset. 58 - Auto Colour Tone Control (Warm/Medium/Cool).59 Manual Picture Adjustment - Picture Mode-User option. 60 - Colour Tone - User option.61 XD - Picture Improvement Technology. 62 XD Demo. 63 Advanced - Cinema/Real Cinema. 64 Advanced - Black(Darkness) Level. 64 Advanced - Trumotion. 65 Picture Reset. 66 TruMotion Demo. 66 Image Sticking Minimization(ISM) Method. 67 Low-Power Picture Mode. 68

ANTENNA CONNECTION

For optimum picture quality, adjust antenna direction. I An antenna cable and converter are not supplied.

Wall Antenna Socket

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

RGB IN HDMI IN

VIDEO AUDIO

VARIABLE AUDIO OUT

RF Coaxial Wire (75 ohm)
Outdoor Antenna (VHF, UHF)
Single-family Dwellings /Houses (Connect to wall jack for outdoor antenna)

Antenna

Signal Amplifier
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above. If signal needs to be split for two TVs,use an antenna signal splitter for connection.
VIDEO R AUDIO L/MONO S-VIDEO
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the LCD TV models.

HD RECEIVER SETUP

This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a component cable
Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O jacks on the TV.

HDMI/DVI IN

Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O jacks on the TV. Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select COMPONENT input source using the I N P U T button on the remote control.
Signal 480i/576i 480p/576p 720p/1080i 1080p
Component Yes Yes Yes Yes
(Only 32LG59**, 37/42/47/52LG55**, 32/37/42/47/52LG75**, 50PG45**, 50PG75**)
HDMI1/2/3/4 (HDMI4 : only PLASMA TV Models) No Yes Yes Yes
Connecting a set-top box with an HDMI cable
Connect the digital set-top box to H D M I I N 2 jack on the TV. Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select HDMI2 input source using the I N P U T button on the remote control. If connected to H D M I I N 3 (or H D M I I N 4) jack, select HDMI3 (or HDMI4) input source.

ANT OUT

L/MONO VIDEO L/ MONO AUDIO R

Connecting HDMI cable

AUDIO IN DIGITAL (RGB/DVI) AUDIO OUT
Connect the HDMI output of the DVD to the H D M I I N 2 jack on the set. Select HDMI2 input source using the I N P U T button on the remote control. If connected to H D M I I N 3 (or H D M I I N 4) jack, select HDMI3 (or HDMI4) input source. Refer to the DVD player's manual for operating instructions.

1(DVI)

RS-232C IN (CONTROL & SERVICE)
The TV can receive video and audio signals simultaneously when using a HDMI cable. If the DVD does not support Auto HDMI, you must set the output resolution appropriately.

VCR SETUP

When connecting with a RF Cable

MI/DVI IN

ANT OUT S-VIDEO VIDEO
To avoid picture noise (interference), allow adequate distance between the VCR and TV. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.

ANT IN OUTPUT SWITCH

Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
Connect the antenna cable to the A N T I N socket of the VCR.
Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.

Wall Jack

IN OPTICAL DIGITAL VI) AUDIO OUT
Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV1 input source using the I N P U T button on the remote control. If connected to A V 2 Euro scart socket, select AV2 input source.

B IN (PC)

V Connect the A U D I O/V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV3 input source using the I N P U T button on the remote control.
Connecting with a RCA cable

232C IN L & SERVICE)

VIDEO S-VIDEO
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the TV.

Connecting with a D-sub 15 pin cable
Connect the RGB output of the PC to the RGB IN (PC) jack on the TV. Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV. Turn on the PC and the TV.
) RS-232C IN (CONTROL & SERVICE)
Select RGB input source using the INPUT button on the remote control.

RGB OUTPUT

Connect the DVI output of the PC to the H D M I / D V I I N 1 ( D V I ) jack on the TV. Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV.
Turn on the PC and the TV. Select HDMI1 input source using the INPUT button on the remote control.

DVI-PC OUTPUT AUDIO

If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. If the PC does not support Auto DVI, you need to set the output resolution appropriately.
enjoy vivid picture and sound, connect a PC to the TV. G Avoid keeping a fixed image on the TVs screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the TV; change the resolution. G There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. G The synchronization input waveform for Horizontal and Vertical frequencies are separate. G In PLASMA TV models, we recommend using 1024x768, 60Hz for the PC mode, these should provide the best picture quality. G Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.

G Connect

the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). G If using a sound card, adjust PC sound as required. G This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV. G DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionality. G If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV. G If the graphic card on the PC does output analogue and digital RGB simultaneously, switch the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.) G DOS mode may not work depending on the video card if you use a HDMI to DVI cable. G If you use too long an RGB[PC] cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.

Mini Glossary

Displayed when a DTV Programme. Displayed when a Locked Programme. Displayed when a Radio Programme.
Skipping a programme number
Select a programme number to be skipped with the D or E or F or G button. Press the BLUE button. The skipped programme number turns to blue. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the PR + or button during normal TV viewing. If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.
Locking a programme (In Lock System On mode only) Select a programme to be locked with the D or E or F or G button. Press the GREEN button. The lock symbol will appear in front of that programme number. Press the GREEN button again to release this function.
Note : G To watch a locked programme, input a 4-digit password in Lock system. Be sure to remember this number! , , , G If you forget your password, press on the remote control handset. G If you select another programme after releasing a locked programme and then return to the locked programme within 1 minute, there is no need to input a password to select the locked programme.
Selecting favourite programme Select your favourite programme number by pressing D or E or F or G button and then press the FAV button on your remote control handset. This will automatically include the selected programme into your favourite programme list.
BOOSTER (IN DIGITAL MODE ONLY)
When the interference between programmes appear, select Booster to Off.
Press the G button and then D or E button to select Booster.
Press the G button and then D or E button to select On or Off.

Off On

SOFTWARE UPDATE (IN DIGITAL MODE ONLY)
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
Press the MENU button and then select the SETUP menu. Press the G button and then Software update. Press the G button and then On or Off.
or E button to select or E button to select
If you select On, a user confirm message box will be displayed to notify that new software is found.
* When setting Software Update
Occasionally, a transmission of updated digital software information will result in the OSD (On Screen Display) on the TV screen. Select YES using the F or G button. The OSD will be disappeared on the TV screen, and you can watch the current TV viewing.

? New software(ver. F.FF.F) is available. Do you want to download? Yes No
When you change the TV to standby mode using the POWER button while watching the TV, it will be started Software update. G Turn on the TV in standby mode. The OSD is displayed on the screen based on Software update circumstances. G After the Software update is complete, the System takes about one minute to restart.
- During Progress of a Software Update, please note the following: Power to the TV must not be interrupted. The TV must not be switched off. The antenna must not be disconnected. After Software Update, you can confirm the updated software version in Diagnostics menu.
DIAGNOSTICS (IN DIGITAL MODE ONLY)
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned MUX. This displays the signal information and service name of the selected MUX.
Press the G button and then D or E button to select Diagnostics.
Press the G button to display Manufacturer, Model/Type, Serial Number and Software Version.
Engineering Diagnostics i Channel 30 Manufacturer : LG Electronics Inc. Transmitter : Digital Finland Model / Type : 37LC2D-EC Signal Strength Serial No. : 604KG0000006 53% Software Version : 1.1.0 Signal Quality CH 30 100%
CH YLE TVYLE KLASS 5 YLE FST 9 YLE Teema

Menu Prev.

2 YLE TVYLE FSR+ 8 YLEYLE PEILE

Back Select

CI [COMMON INTERFACE] INFORMATION (IN DIGITAL MODE ONLY)
This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output. This may be incompatible with the CI module and smart card.
Press the G button and then D or E button to select CI Information.
Press the G button and then OK button.
Press the D or E button to select the desired item: Module information, smart card information, language or software download etc.

Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Programme Edit. Press the G button to display the Programme Edit menu.
Deleting a programme Select a programme to be deleted with the D or E or or G button.
Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position.

Copying a programme

Select a programme to be copied with the D or E or or G button.
Press the GREEN button. All the following programmes are shifted down one position.
SIMPLINK TEXT RATIO I/II FAV VOL PR
Moving a programme Select a programme to be moved with D or E or F or G button. Press the YELLOW button. Move the programme to the desired programme number with the D or E or F or G button. Press the YELLOW button again to release this function.

a b c d

Skipping a programme number Select a programme number to be skipped with D or E or F or G button. Press the BLUE button. The skipped programme number turns to blue. Press the BLUE button to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the PR + or button during normal TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. Selecting a Favourite Programme Select your favourite programme number with D or E or F or G button. Press the FAV button. The selected programme will be added to the favourite programme list.
SELECTING THE PROGRAMME TABLE
You can check which programmes are stored in the memory by displaying the programme table.

DTV List

Displaying programme LIST Press the LIST button to display the PROGRAMME LIST menu. The programme list appears on the screen. You may find some blue programmes. These have been set up to be skipped by auto programming or in the programme edit mode. Some programmes with the channel number shown in the programme LIST indicate there is no station name assigned.
YLE TV1 YLE TV2 YLE FST YLE 24 YLE Teema TV4 TV4 Film TVTV4 Plus CNN
< In Digital Mode >

Programme List

Selecting a programme in the programme list Select a programme with the D or E button. Press the OK button. The TV switches to the chosen programme number.
BBC1 C 01 C 04 C 43 C 05 BLN 2 S 04 S 05 S 07 S 12
Paging through a programme list (Digital Mode Only) Press the PR + or - button repeatedly to turns the pages. Press the LIST button to return to normal TV viewing.
< In Analogue Mode >
Displaying the favourite programme table Press the FAV button to display the Favourite Programme table menu.
Mini Glossary Displayed when the Locked Programme.

6 BBC Channel Today G 14:30
This is BBC THREE BBC BBCi Racing BBC NEWS Racing News BBC THREE

Date Change Date Exit

Button Function in Extended Description Box
Remote Control Buttons D or E INFO i PR + or GUIDE/EXIT Function Text Up/Down The detail information on or off Page Up/Down Switch off EPG
Information Friends Mona The Vampire 14:00 15:20 Record 3 Apr 14 : Apr
Miss Gottos Haunted House/Cry Of the Swamp; Miss Gotto Wail Moves into a new house, and theres mysterious wail enanating from the local sweep Of The Swamp; Miss Gotto Wail Moves into a new house, and theres a mysterious wail enanating from the local sweep Of The Swamp; Miss Gotto Wail Moves into a new house, and theres a mysterious wail enanating from the local sweep Of The Swamp; Miss Gotto Wail Moves into a new house, and theres a mysterious wail enanating from the local sweep Of The Swamp

Info. Exit

Manual Record
Button Function in Record/Remind Setting Mode
- This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT terminal, using a SCART cable. Remote Control Buttons Function YELLOW Change to Guide mode Save Timer Record/Remind Select Type, Service, Date or Start/End time F or G Function setting D or E
Manual Record 14 : Apr Type

Programme 07 BBC THREE

Date 28 Feb

Start 22 : 35

End 23 : 00

Record

Cancel
Button Function in Timer List Mode
Remote Control Buttons YELLOW GREEN RED BLUE D or E Function Add new Manual Timer setting mode Enter Timer list editing mode Delete the selected item Change to Guide mode Select Timer list

Schedule List

1 BBC TWO 08:00 ~ 09:00 Fri 23 Feb

14 : Apr

Title Friends Newsnight review Road trip BBC News Carrott Gold Frineds
Programme 01 BBC TWO 02 BBC TWO 02 BBC TWO 07 BBC THREE 01 BBC ONE 01 BBC TWO
Date Wed 23 Feb Fri 25 Feb Sat 26 Feb Fri 25 Feb Mon 28 Feb Wed 28 Feb
Time 08:00 23:00 00:35 12:00 22:35 08:00

Delete

VCR SIMPLINK TEXT RATIO I/II
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; : 9, O r i g i n a l, 4 : 3, : 9, Z o o m 1 / 2 and J u s t S c a n (Only 32LG59**, 37/42/47/52LG55**, 32/37/42/47/52LG75**, 42LG75**, 50PG45**, 50PG75**). It is possible to use Just Scan in DTV mode only. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
FAV BACK EXIT MENU INFO i GUIDE
You can adjust the enlarge proportion using D or E button.
Press the R A T I O button repeatedly to select the desired picture format. You can also adjust Aspect Ratio in the SCREEN menu.

SIMPLINK TEXT RATIO I/II

LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The Audio function allows selection of a preferred language.If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
Press the MENU button and then D or E button to select the OPTION menu. Press the G button and then D or E button to select Language. Press the G button and then D or E button to select Audio, Subtitle or Subtitle Hard of hearing. Press the G button and then F or G button to select your desired language. Press the EXIT button to return to normal TV viewing.
< Audio Language Selection > G When two or more audio languages are broadcast, you can select the audio language with the I/II button on the remote control. G Press the D or E button to select an audio language. G Press the F or G button to select L+R, L+L or R+R. < Subtitle Language Selection > G When two or more subtitle languages are broadcast, you can select the subtitle language with the SUBTITLE button on the remote control. G Press the D or E button to select a subtitle language.
Audio Language OSD Information Display N.A Status Not Available Audio for Visual Impaired Dolby Digital Audio HE-AAC Audio Dolby Digital Plus Audio
Subtitle Language OSD Information Display N.A
Status Not Available Teletext Subtitle Subtitle for Hard of Hearing
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider. - When you select supplementary Audio (Audio for Visual/Hearing Impaired) the TV may output a part of the Main audio.

CLOCK SETUP

The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function.
Press the MENU button and then select the TIME menu.

Press the Clock.

button and then
Press the G button and then F or G button to select either the year, date or time option.
Clock Off Time On Time Auto Sleep Time Zone
Once selected, use the D or E button to set the year, date, and time options.

Time Date Year

14 Apr 2007
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. The Off time function overrides the On timer function if both are set to the same time. The TV must be in standby mode for the On timer to work.

Press the MENU button and then D or E button to select the OPTION menu. Press the G button and then D or E button to select Parental Control. Then, press the G button to enter the password as requested. The TV is set up with the initial password 0-0-0-0. Press the G button and then D or E button to select Parental Guidance or Key Lock. Parental Guidance (In Digital Mode only) Prevents children from watching certain adults TV programmes, according to the ratings limit set. Key Lock The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing.

Parental Guidance

Key Lock
Press the F or G button to make appropriate adjustments. Press the EXIT button to return to normal TV viewing.
In Key Lock On, if the TV is turned off, press the r / I, INPUT, PR INPUT, D/A TV, PR + or - or NUMBER buttons on the remote control.
button on the TV or POWER,
With the Key Lock On, the display Key Lock On appears on the screen if any button on the front panel is pressed while viewing the TV.
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.

SWITCH ON/OFF

Press the T E X T button to switch to teletext. The initial page or last page viewed appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the T E X T or E X I T button to switch off teletext. The previous mode reappears.

SIMPLE TEXT

Page selection
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The PR+ or - button can be used to select the preceding or following page.

TOP TEXT

The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block.
Block / group / page selection
With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the PR+ button can be used. The red button returns to the previous selection. Alternatively the PR- button can be used.

AIWA AKAI
MAGNAVOX MARANTZ MARTA MATSUI MEI MEMOREX

033 067

SAMSUNG
125 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 BROKSONIC 035 CANON 028 CAPEHART 108 CRAIG 003 CURTIS MATHES 031 DAEWOO DAYTRON 108 DBX 012 DYNATECH 034 ELECTROHOME 059 EMERSON FISHER 003 FUNAI 034 GE GO VIDEO 132 HARMAN KARDON HITACHI INSTANTREPLAY 031 JCL 031 JCPENNY JENSEN 043 JVC 130 KENWOOD LG (GOLDSTAR) LLOYD 034 LXI MAGIN 040

MGA MINOLTA MITSUBISHI

153 010
MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC

021 048

PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RCA

REALISTIC

062 140

063 144

101 106

RICO RUNCO SALORA

125 SANSUI 022 SANYO SCOTT SEARS SHARP 031 SHINTOM 024 SONY 077 SOUNDESIGN 034 STS 013 SYLVANIA SYMPHONIC 034 TANDY 010 TATUNG 039 TEAC 034 TECHNICS 031 TEKNIKA THOMAS 034 TMK 006 TOSHIBA TOTEVISION 040 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 VIDEOSONIC 040 WARDS 053 YAMAHA 012 ZENITH 034 058

131 101

043 101

IR CODES

1. How to Connect
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes

Output waveform

Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3

Configuration of frame

1st frame
Lead code Low custom code High custom code Data code Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Repeat frame

Repeat code

Lead code

9 ms 4.5 ms

0.55 ms

2.25 ms

Bit description Bit 0

0.56 ms

1.12 ms

0.56 ms 2.24 ms
Frame interval: Tf The waveform is transmitted as long as a key is depressed.

Tf Tf Tf=108ms @455KHz

Code (Hexa) 19 0B AA AB 56 5B 1E 1A 50 F0 7E E0 E1 0A 0E 2A B0 BA B2 B3 8F 8E B1 BD Function PR + PR VOL + VOL Up (D) Down (E) Right (G) Left (F) POWER MUTE Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 INPUT INFO i GUIDE SUBTITLE EXIT FAV Q.VIEW D/A TV TV/RADIO SIMPLINK BRIGHT + BRIGHT I/II SLEEP MENU OK( ) LIST TEXT REVEAL TIME BACK UPDATE INDEX HOLD BLUE Key YELLOW Key GREEN Key RED Key RATIO
Note R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON (POWER ON/OFF) R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON

Transmission / Receiving Protocol

Transmission

[Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command 1] : First command to control the TV. (j, k, m or x) * [Command 2] : Second command to control the TV. : You can adjust the set ID to choose * [Set ID] desired monitor ID number in option menu. Adjustment range is 1 ~ 99. When selecting Set ID 0, every connected TV is controlled. Set ID is indicated as decimal (1~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receiving protocol. : To transmit command data. * [DATA] Transmit FF data to read status of command. : Carriage Return * [Cr] ASCII code 0x0D [ ] : ASCII code space (0x20) *

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x] * The TV transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x] * The TV transmits ACK (acknowledgement) based on this format when receiving abnormal data from nonviable functions or communication errors. Data 01: Illegal Code 02: not support function 03: Wait more time

01. Power (Command: k a)

G To control Power On/Off of the TV.
04. Volume Mute (Command: k e)
G To control volume mute on/off.
[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack

G To show Power On/Off.

You can also adjust mute using the MUTE button on remote control. Transmission : Power On [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on) Ack [e][ ][Set ID][ ][OK][Data][x]
[a][ ][Set ID][ ][OK][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
[a][ ][Set ID][ ][OK][Data][x] * Similarly, if other functions transmit 0xFF data based on this format, Acknowledgement data feed back presents status about each function.
05. Volume Control (Command: k f)

G To adjust volume.

You can also adjust volume with the VOLUME buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to Real data mapping 1. See page 102. Ack [f][ ][Set ID][ ][OK][Data][x]
02. Aspect Ratio (Command: k c) (Main Picture Size)
G To adjust the screen format. (Main picture format)

14. Colour Temperature (Command: k u)
G To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 00: Cool Ack 01: Medium 02: Warm 03: User
[u][ ][Set ID][ ][OK][Data][x] 11. OSD Select (Command: k l)
G To select OSD (On Screen Display) on/off when con-
15. Red Adjustment (Command: k v)
G To adjust red in colour temperature.

trolling remotely.

[k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off Ack 01 : OSD on
Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 50 * Refer to Real data mapping 2. Ack [v][ ][Set ID][ ][OK][Data][x]
[l][ ][Set ID][ ][OK][Data][x]
16. Green Adjustment (Command: k w)
G To adjust green in colour temperature.
19. ISM Method (Command: j p)
G To control the ISM method. You can also adjust ISM
[k][w][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 50 * Refer to Real data mapping 2. Ack [w][ ][Set ID][ ][OK][Data][x]
Method in OPTION menu. It is not possible to use this function with LCD TV models. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 00: Normal 01: White wash 02: Orbiter 03: Inversion
[p][ ][Set ID][ ][OK/NG][Data][x] 17. Blue Adjustment (Command: k $) G To adjust blue in colour temperature. Transmission [k][$][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 50 * Refer to Real data mapping 2. Ack [$][ ][Set ID][ ][OK][Data][x] 20. Low Power (Command: j q)
G To reduce the power consumption of the TV. You can
also adjust Low Power in OPTION menu. It is not possible to use this function with LCD TV models. Transmission [j][q][ ][Set ID][ ][Data][ ][Cr] Data 00 : Off 01 : On Ack [q][ ][Set ID][ ][OK/NG][Data][x]
18. Abnormal State (Command: k z)
G To recognize an abnormal state.
[k][z][ ][Set ID][ ][FF][ ][Cr] Data FF : Read Ack [z][ ][Set ID][ ][OK][Data][x] Data 00: Normal (Power on and signal exist) 01: No signal (Power on) 02: Turn the TV off by remote control 03: Turn the TV off by sleep time function 04: Turn the TV off by RS-232C function 05: 5V down 06: AC down 07: Turn the TV off by Fan Alarm function 08: Turn the TV off by Off time function 09: Turn the TV off by Auto sleep function a: Turn the TV off by AV Board detect * This function is read only.
* Real data mapping : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 73 : Step 74 : Step C7: Step 199 FE : Step 254 FF : Step 255