Adjustment for screen Position, Size, Phase
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB[PC].
Select P o s i t i o n, S i z e or P h a s e.
Make appropriate adjustments.

Selecting Resolution

To view a normal picture, match the resolution of RGB mode and selection of PC mode. This function works in the following mode: RGB[PC]
Select R e s o l u t i o n.
Select the desired resolution.

1024 x x x 768

Auto Configure (RGB [PC] mode only)
Automatically adjusts the picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment. Auto configure This function is for automatic adjustment of the screen position, size, and phase The displayed image will be unstable for a few seconds while the auto configuration is in progress.
If the position of the image is still not correct, If picture needs to be adjusted again after Auto
try Auto adjustment again.
adjustment in RGB (PC), you can adjust the P o s i t i o n, S i z e or P h a s e.
Select A u t o C o n f i g.

Run A u t o C o n f i g.

REMOTE CONTROL KEY FUNCTIONS
(Only 32/37/42/47LH40**, 32/37/42/47LH49**, 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**)
When using the remote control, aim it at the remote control sensor on the TV. ENERGY SAVING Adjust the Energy Saving mode of the TV. (G p. 2) RATIO Selects your desired Aspect Ratio of picture. (G p. 9 9) POWER Switches the TV on from standby or off to standby. INPUT External input mode rotate in regular sequence. (G p. 6 6) TV/RAD Selects Radio, TV and DTV channel. Q. MENU Select the desired quick menu source. (Aspect Ratio, Clear Voice II , Picture Mode, Sound Mode, Audio, Sleep Timer, Favourite, USB Device).(G p. 5 1) MENU Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(G p. 5 2) GUIDE Shows programme schedule.(G p. 9 6)
(Up/Down/Left/ the system settings to your preference. Right)
THUMBSTICK Allows you to navigate the on-screen menus and adjust
OK Accepts your selection or displays the current mode.
RETURN(EXIT) Allows the user to move return one step in an interactive application, EPG or other user interaction function. INFO i Shows the present screen information. AV MODE It helps you select and set images and sounds when connecting AV devices.(G p. 7 2) Coloured These buttons are used for teletext (on T E L E T E X T buttons models only) , P r o g r a m m e e d i t.
TELETEXT These buttons are used for teletext. BUTTONS For further details, see the Teletext section.(G p. 5) SUBTITLE Recalls your preferred subtitle in digital mode. See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(G p. 6 9)

VOLUME UP Adjusts the volume. /DOWN MARK Check and un-check programmes in the USB menu. FAV Displays the selected favourite programme. MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the next UP/DOWN one. 0~9 number Selects a programme. button Selects numbered items in a menu. LIST Displays the programme table.(G p. 6 4) Q.VIEW Returns to the previously viewed programme. SIMPLINK / Controls SIMPLINK or USB menu(Photo List and Music USB Menu List or Movie List (Only 32/37/42/47LH49**, control buttons 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**)). FREEZE Pause the present picture at the screen.(Plasma TV only)

Installing Batteries

Open the battery compartment cover on the back and install the batteries matching correct polarity (+with +,-with -). Install two 1.5V AAA batteries. Do not mix old or used batteries with new ones. Close cover.
(Only 19/22LU40**, 19/22/26LU50**, 32/37/42LF25**, 32/37/42LG21**, 19/22/26/32/37/42LH20**, 32/37/42/47LH30**)
When using the remote control, aim it at the remote control sensor on the TV. TV/RAD Selects Radio, TV and DTV channel. AV MODE It helps you select and set images and sounds when connecting AV devices.(G p. 7 2)

AV MODE ENERGY SAVING

POWER Switches the TV on from standby or off to standby. INPUT External input mode rotate in regular sequence. (G p. 6 6) ENERGY SAVING Adjust the Energy Saving mode of the TV. (G p. 2)
0~9 number Selects a programme. button Selects numbered items in a menu. Q.VIEW Returns to the previously viewed programme.

LIST Q.VIEW

LIST Displays the programme table.(G p. 6 4) THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/Right) the system settings to your preference.
MENU Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu.(G p. 5 2) RETURN(EXIT) Allows the user to move return one step in an interactive application, EPG or other user interaction function.

RETURN / EXIT

Coloured These buttons are used for teletext (on T E L E T E X T buttons models only) , P r o g r a m m e e d i t.

Q.MENU INFO

GUIDE MARK FAV
VOLUME UP Adjusts the volume. /DOWN MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the next UP/DOWN one.
SIMPLINK Controls SIMPLINK. control buttons
Q. MENU Select the desired quick menu source. (Aspect Ratio, Clear Voice II , Picture Mode, Sound Mode, Audio, Sleep Timer, Favourite, Energy Saving.)(G p. 5 1) INFO i Shows the present screen information. GUIDE Shows programme schedule.(G p. 9 6) FAV Displays the selected favourite programme. MARK Select the input to apply the Picture Wizard settings.

TURNING ON THE TV

- When your TV is turned on, you will be able to use its features. Firstly, connect the power cord correctly and check the main power on the TV. At this stage, the TV switches to standby mode. In standby mode to turn TV on, press the INPUT or P D E (or P ) button on the TV or press the POWER, INPUT, P or NUMBER button on the remote control and the TV will switch on.

Disc playback Control connected AV devices by pressing the , OK, G, A, l l, FF and GG buttons. Direct Play After connecting AV devices to the TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of the AV devices connected to the TV and operate it. Power off all devices When you switch off the TV, all connected devices are turned off. Switch audio-out Offers an easy way to switch audio-out. Sync Power on When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically to turn on mode. * A device, which is connected to the TV through an HDMI cable but does not support SIMPLINK, does not provide this function. Note: To operate SIMPLINK, an HDMI cable over Version 1.3 with *CEC function should be used. (*CEC: Consumer Electronics Control).

SIMPLINK Menu

Press the
button and then OK button to select the desired SIMPLINK source.
T V v i e w i n g : Switch to the previous TV programme regardless of the current mode. D I S C p l a y b a c k : Select and play connected discs. When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the screen. V C R p l a y b a c k : Play and control the connected VCR. H D D R e c o r d i n g s p l a y b a c k : Play and control recordings stored in HDD. Audio Out to Home theater/Audio Out to TV: Select Home theater or TV speaker for Audio Out.
Selected Device When device is not connected (displayed in gray) When a device is connected (displayed in bright colour)

Change Device

Home theater: Only one supported at a time DVD, Recorder: Up to one(19/22LH20**), two(19/22LU40**, 19/22LU50**, 26/32/37/42LH20**, 32/37/42LF25**, 32/37/42LG21**), three(32/37/42/47LH30**,
VCR: Only one supported at a time
32/37/42/47LH40**, 26LU50**) or four(32/37/42/47LH49**, 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**) supported at a time.

AV MODE

You can select the optimal images and sounds when connecting AV devices to external input. Off Cinema Sport Game Disables the AV MODE. Optimizes video and audio for watching movies. Optimizes video and audio for watching sports events. Optimizes video and audio for playing games.

Cinema

1AV MODE 2
Press the AV MODE button repeatedly to select the desired source.
If you select C i n e m a in AV mode, C i n e m a will be selected both for
P i c t u r e M o d e and S o u n d M o d e in P I C T U R E menu and A U D I O menu respectively. O If you select O f f in AV mode, the picture and image which you initially set will be selected.
INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS)

Only one Bluetooth headset can be connected at once. G Connection that is lost due to the TV being turned off etc. will not be automatically recovered. Try connecting the applicable device again. G Some operations can be slower while operating the headset. G Even if you choose simplink Home Theater after using the headset during Simplink operation, the unit will not automatically switch to Home Theater speakers. G When the headset connection continuously fails, pair the device one more time. G The audio quality of mono headsets will not be as good as that for stereo headsets. G Mono headsets may suffer from noise as the distance from the TV increases, because they use a different transmission method compared with stereo headsets. G When a Bluetooth headset is in use, the Volume +/- and Mute keys do not work, and the Audio menu returns to the default value and is disabled. G With Bluetooth set to On, if any registered devices are turned on, the TV will switch to Bluetooth mode automatically even though you are watching in another input mode. In this case, set Bluetooth to Off.
MANAGING REGISTERED BLUETOOTH DEVICE
If there are no devices registered, Registered Bluetooth Device menu will be deactivated and cannot be used. When 12 devices are registered, you cannot register any more devices, and the external device will no longer be able to pair up with the TV. In this case, you should delete one (disconnect first if a device is connected to the TV) and then you can register another device.

Bluetooth

Bluetooth Headset : Disconnected Bluetooth Device Registered Bluetooth Device My Bluetooth Info.
: Off Registered Bluetooth Device TV PIN : 0000 00:0d:44:84:14:62 Bluetooth Headset : Disconnected Registered Bluetooth Device Registered Bluetooth Device FreePulse_Wireless My Bluetooth Info. LG L600V

Connect

Select B L U E T O O T H. Select R e g i s t e r e d B l u e t o o t h D e v i c e. Check the registered Bluetooth device.
Connecting the registered Bluetooth headset
Select the registered Bluetooth headset you want to connect.
BLUE Message asking to connect the selected Bluetooth headset will be displayed.
"Delete" will be available when selecting the device that is not connected to the TV.
Deleting registered Bluetooth device
Select the Bluetooth device you want to remove. RED Message asking to delete the selected Bluetooth device will be displayed.

Image shown may differ from your TV. G In order to avoid losing the USB memory stick, use the USB connector(sold separately) to fix the USB memory stick to the USB connector holder of the TV. (Plasma TV only)

USB connector holder

USB Input Port USB Connector (sold separately) - Fix the one end of the USB connector to the USB memory stick and the other end to the USB connector holder.

PHOTO LIST

You can view photo files on USB storage device. The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
PHOTO(*.JPEG) supporting file Baseline : 64 x 64 ~ 15360 x 8640 Progressive : 64 x 64 ~ 1920 x 1440 You can play JPEG files only. Non-supported files are displayed in the form of predefined icon.

Screen Components

1 MENU

Select U S B.

Select Photo List.
Moves to upper level folder Current page/Total pages Total number of marked photos Corresponding buttons on the remote control

Photo List

Drive1 JMJ001

Page 2/3

No Marked KY103
09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
Up Folder KY101 KY102 JMJ001
KY104 KY105 JMJ005 JMJ006 JMJ007 JMJ008

1366x768, 125KB

JMJ002 JMJ003
Up Folder Navigation Popup Menu

JMJ004

Photo Selection and PopUp Menu

Drive1

JMJ001

No Marked Up Folder

KR101 KR102 JMJ001 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
KR103 KR104 KR105 JMJ005 JMJ006 JMJ007 JMJ008
09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
1366x768, 125KB Up Folder Navigation Popup Menu

JMJ002 JMJ003 JMJ004

KR101 KR102 JMJ001 09/10/2008 09/10/2008 KR103 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008 09/10/2008
View : Display the selected item.
KR104 KR105 JMJ005 JMJ006 JMJ007 JMJ008

View 09/10/2008

09/10/2008 09/10/2008 09/10/2008

Mark All Delete Close

Mark All : Mark all photos on the screen. Unmark All : Deselect all marked photos. G D e l e t e or Delete Marked(FAT32 file system only) : Delete the selected photo item. G C l o s e : Close the pop-up menu.
Select the target folder or drive.

Use the P

Select the desired photos.

Select Music List.

Preview: If any album jacket for the file(Album Art Image) exists, this jacket is displayed. Moves to upper level folder Current page/Total pages Total number of marked music title Corresponding buttons on the remote control

Music List

No Marked Title Duration

Up Folder

01:34 00:00/01:34 Up Folder Navigation Popup Menu Page Change

03:23 04:28 Mark Exit

Music Selection and PopUp Menu
As shown, up to 6 music titles are listed per page.
No Marked Title Up Folder Duration
00:00/01:34 Up Folder Navigation Popup Menu Page Change
01:34 03:23 04:28 Mark Exit
No Marked Title Up Folder

4395KB 1Kbps

Play Play with Photo Mark All Delete

Close 04:28 Mark Exit

P l a y (During stop) : Play the selected music titles. One playback of a piece of music finishes, the next selected one will be played. When there are no selected music titles to play, the next one in the current folder will be played. If you go to a different folder and press the O K button, the current music in playback will stop. G P l a y M a r k e d : Play the selected music titles. Once a music finishes playing, the next selected one will be played automatically. G S t o p P l a y (During playback) : Stop the playing music titles. G P l a y w i t h P h o t o : Start playing the selected music titles and then move to the Photo List. G M a r k A l l : Mark all music titles in the folder. G U n m a r k A l l : Deselect all marked music titles. G D e l e t e or Delete Marked(FAT32 file system only) : Delete the selected music titles. G C l o s e : Close the pop-up menu.
Select the desired music title
button to navigate up/down in the music page. Use M A R K button to mark or unmark a music. When one or more music files are marked, the marked music title will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence.
If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. The Screen Saver? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time.
When a music file is played, is displayed behind the title. G A damaged or corrupted music does not play but displays 00:00 in playtime. G A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. G If you press O K, A buttons, screen saver is stopped. G The P L A Y ( G) , P a u s e ( I I ) , A, GG, FF buttons on the remote control are also available in this mode. G You can use the GG button to select the next music and the FF button to select the previous music.

Dolby Digital,HEAAC,AAC,MPEG,MP3,LPCM
Audio Codec Dolby Digital,MPEG,MP3,LPCM Dolby Digital,MPEG,MP3,LPCM Dolby Digital,AAC,MPEG Dolby Digital,HEAAC, AAC,MPEG,MP3,LPCM

Max Resolution

1920x1080@30p
Dolby Digital,HEAAC,AAC,MPEG, MP3,LPCM

Select Movie List.

Moves to upper level folder Current page/Total pages Total number of marked movie title Corresponding buttons on the remote control

640x480, 720KB

Movie List
Up Folder Navigation Popup Menu Page Change
Movie Selection and PopUp Menu
movie Up Folder Page 2/3 No Marked Title Duration
1:340, 120KB Up Folder Navigation Popup Menu Page Change
Play Mark All 1:340, 120KB Up Folder Navigation Popup Menu Page Change

Delete Close

Play : Play the selected movie. Divx Play is executed while screen changes. G M a r k A l l : Mark all Movie in the folder. G U n m a r k A l l : Deselect all marked movies. G D e l e t e or Delete Marked(FAT32 file system only) : Delete the selected Movie item. G C l o s e : Close the pop-up menu.
Select the desired movie title
button to navigation in the movie page. Use M A R K button to mark or unmark a movie. When one or more movie files are marked, the marked movies will be played in sequence.
In the case of files not supported, a message regarding non-supported file is displayed.
Using the Movie List function, play
Picture Size Audio Language Subtitle Language. Sync. Position

Full 1 Latin 0

Option

Subtitle Language Latin1

Support Language English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan,Valencian Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Hungarian Estonian, Latvian, Lithuanian Bulgarian, Macedonian, Russian, Ukrainian, Kazakh Greek Turkish
Latin2 Latin4 Cyrillic Greek Turkish
P i c t u r e S i z e : Selects your desired picture format during movie play. G Audio Language & Subtitle Language : Changes the Language Group of the audio/subtitle during movie play. G S y n c : Adjusts the time synchronisation of the subtitle from -10 secs ~ +10 secs by steps of 0.5 secs during movie play. G P o s i t i o n : Changes the position of the subtitle either up or down during movie play.

Only the files saved in ASCII CODE is supported for the external subtitles of the movie. G Only 250 Korean characters, 500 alphabets and 500 numbers are supported for each line of the subtitle. G Only 10,000 of sync blocks can be supported within the subtitle file.

Using the remote control

When playing,
repeatedly, press the R E W( FF) button to speed up FF(x2) -> FFF(x4) -> FFFF(x8) -> FFFFF(x16) ->FFFFFF(x32). repeatedly, press the F F( GG) button to speed up GG(x2)-> GGG(x4) -> GGGG(x8) -> GGGGG(x16) -> GGGGGG(x32).
Pressing these buttons repeatedly increases the fast forward/reverse speed.
During playback, press the P a u s e ( I I) button. Still screen is displayed. If no buttons are pressed on the remote control for 10 minutes after pausing, the TV returns to the playback state. Press the P a u s e ( I I ) button and then use the F F ( GG ) button for slow motion.
When using the or button during playback a cursor indicating the position can be viewed on the screen.

P L A Y ( G)

Press the P L A Y( G) button to return to normal playback. Press the E N E R G Y S A V I N G button repeatedly to increase the brightness of your screen.(Refer to p. 102)
Press the A V M O D E button repeatedly to select the desired source.(Refer to p. 72)
TO USE A USB DEVICE DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.)
Photo List Music List Movie List DivX Reg. Code DivX Reg. Code Deactivation

DivX(R) Video On Demand

Your registration Code is: xxxxxxxxxx To learn more visit www.divx.com/vod. Close
Select D i v X R e g. C o d e.
Display D i v X R e g. C o d e.
DivX Certified to play DivX video up to HD 1080p, including premium content ABOUT DIVX VIDEO: DivX is a digital video format created by DivX,Inc. This is an official DivX Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

Original

Just Scan Following Selection will lead to you view the picture of best quality without loss of original picture in high resolution image. Note : If there is noise in original Picture, You can see the noise at the edge.
Full Wide When TV receives the wide screen signal,it will lead you to adjust the picture horizontally or vertically, in a linear proportion,to fill the entire screen fully.

Just Scan

Full Wide
4:3 The following selection will allow you to view a picture with an original 4:3 aspect ratio, gray bars will appear on both the left and right of the screen.
Zoom The following selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped.
14:9 You can view a picture format of 14:9 or a general TV programme in the 14:9 mode. The 14:9 screen is viewed in the same way as in 4:3, but is magnified to the left and right.
Cinema Zoom Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note:When enlarging or reducing the picture, the image may become distorted.
F or G button: Adjust enlarge proportion of E or D button: Move the screen.
Cinema Zoom. The adjustment range is 1~16.

G G G G G

You can only select 4 : 3, : 9 (Wide), : 9, Z o o m / C i n e m a Z o o m in Component mode. You can only select 4 : 3, Original, : 9 (Wide), : 9, Z o o m / C i n e m a Z o o m in HDMI mode. You can only select 4 : 3, : 9 (Wide) in RGB-PC, HDMI-PC mode only. In DTV/HDMI/Component (over 720p) mode, J u s t S c a n is available. In Analogue/AV mode, Full Wide is available.

PICTURE WIZARD

This feature lets you adjust the picture quality of the original image. Use this to calibrate the screen quality by adjusting the Black and White Level etc. General users can calibrate the screen quality by easily following each stage. When you adjust the image to Low, Recommended or High, you can see the changed result as an example. In RGB input, the changed Colour, Tint and H/V Sharpness values are not applied.
Picture Wizard With Picture Wizard, you can adjust the picture quality of the original image.

100.0 x 55.0 x 5.0mm 3.94 x 2.17 x 0.20inches Operating Temperature 0 ~ 40C / 32 ~ 104F Less than 80% -20 ~ 60C / -4 ~ 140F Less than 85%
MODELS with stand without stand 19LH20** 19LH2000-ZA / 19LH2010-ZB 19LH2020-ZC
462.4 x 353.0 x 1 71.0 mm 1 x 1 x 6.8 inches 8.2 3.9 462.4 x 308.0 x 65.0 mm 1 x 1 x 2.6 inches 8.2 2.2 3.8 kg / 8.4 lbs 3.6 kg / 8.0 lbs AC100-240V~ 50/60Hz 40W
22LH20** 22LH2000-ZA / 22LH2010-ZB 22LH2020-ZC
533.4 x 397 x 1.0 71.0 mm 21.0 x 1 x 6.8 inches 5.7 533.4 x 351.7 x 65.0 mm 21.0 x 1 x 2.6 inches 3.9 4.8 kg / 10.6 lbs 4.6 kg / 10.2 lbs AC100-240V~ 50/60Hz 55W
26LH20** 26LH2000-ZA 26LH2020-ZC
667 x 504.0 x 224.0 mm.0 26.3 x 19.9 x 8.8 inches 667 x 446.2 x 80.0 mm.0 26.3 x 1.6 x 3.2 inches 7 8.9 kg / 19.7 lbs 7 kg / 1.2 lbs.AC100-240V~ 50/60Hz 1 10W
32LH20** 32LH2000-ZA 32LH2020-ZC 32LH2010-ZB
805.0 x 586.0 x 21 mm 1.0 31.7 x 23.1 x 8.3 inches 805.0 x 528.0 x 79.9mm 31.7 x 20.8 x 3.2 inches 1 kg / 25.4 lbs 1.5 10.3 kg / 22.7 lbs AC100-240V~ 50/60Hz 150W

26LH2010-ZB

667 x 507 x 21 mm 805.0 x 583.0 x 224.0 mm.0.0 1.0 26.3 x 20.0 x 8.3 inches 31.7 x 23.0 x 8.8 inches 667 x 446.2 x 80.0 mm.0 26.3 x 1.6 x 3.2 inches 7 8.9 kg / 19.7 lbs 7 kg / 1.2 lbs.AC100-240V~ 50/60Hz 1 10W 805.0 x 528.0 x 79.9mm 31.7 x 20.8 x 3.2 inches 1 kg / 25.4 lbs 1.5 10.3 kg / 22.7 lbs AC100-240V~ 50/60Hz 150W
37LH20** 37LH2000-ZA 37LH2020-ZC
922.0 x 659.0x 297.0mm 36.3x 26.0 x 1 inches 1.7 922.0 x 595.0x 88.0mm 36.3x 23.4 x 3.5 inches 14.8 kg / 32.6 lbs 13.0 kg / 28.7 lbs AC100-240V~ 50/60Hz 1 80W
42LH20** 42LH2000-ZA 42LH2020-ZC
1028.0 x 715.4 x 297.0mm 40.5x 28.2 x 1 inches 1.7 1028.0 x 655.0x 88.7mm 40.5 x 25.8 x 3.5 inches 18.0 kg / 39.7 lbs 16.2 kg / 35.7 lbs AC100-240V~ 50/60Hz 210W

37LH2010-ZB

922.0 x 660.0x 270.6mm 36.3x 26.0 x 10.7 inches 922.0 x 595.0x 88.0mm 36.3x 23.4 x 3.5 inches 14.8 kg / 32.6 lbs 13.0 kg / 28.7 lbs AC100-240V~ 50/60Hz 1 80W

42LH2010-ZB

1028.0 x 716.4 x 270.6mm 40.5x 28.2 x 10.7 inches 1028.0 x 655.0x 88.7mm 40.5 x 25.8 x 3.5 inches 18.0 kg / 39.7 lbs 16.2 kg / 35.7 lbs AC100-240V~ 50/60Hz 210W
32LH30** 32LH3000-ZA 32LH3020-ZD/ 32LH3010-ZB/ 32LH3030-ZE
37LH30** 37LH3000-ZA 37LH3020-ZD/
922.0 x 659.0x 297.0mm 36.3x 26.0 x 1 inches 1.7 922.0 x 595.0x 88.0mm 36.3x 23.4 x 3.5 inches 14.9 kg / 32.9 lbs 13.1 kg / 28.9 lbs AC100-240V~ 50/60Hz 1 80W

37LH3010-ZB/ 37LH3030-ZE

922.0 x 660.0x 270.6mm 36.3x 26.0 x 10.7 inches 922.0 x 595.0x 88.0mm 36.3x 23.4 x 3.5 inches 14.9 kg / 32.9 lbs 13.1 kg / 28.9 lbs AC100-240V~ 50/60Hz 1 80W
805.0 x 583.0 x 224.0 mm 805.0 x 586.0 x 21 mm 1.0 31.7 x 23.0 x 8.8 inches 31.7 x 23.1 x 8.3 inches 805.0x 531.0x 79.9mm 31.7 x 20.9 x 3.2 inches 12.1 kg / 26.7 lbs 1 kg / 24.3 lbs 1.0 AC100-240V~ 50/60Hz 150W 805.0x 531.0x 79.9mm 31.7 x 20.9 x 3.2 inches 12.1 kg / 26.7 lbs 1 kg / 24.3 lbs 1.0 AC100-240V~ 50/60Hz 150W

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors.
* When setting the 17 ~ 24, a menu does not appear on screen. * Note : During USB operations such as Dvix or EMF, all com- Data 00: Illegal Code mands except Power(ka) and Key(mc) are not executed and treated as NG.

01. Power (Command: k a)

G To control Power On/Off of the set.
0 4. V o l u m e M u t e (C o m m a n d : k e )
G To control volume mute on/off.
[k][a][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Ack

G To show Power On/Off.

01 : Power On
You can also adjust mute using the MUTE button on remote control. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Volume mute on (Volume off) 01 : Volume mute off (Volume on) Ack [e][ ][Set ID][ ][OK/NG][Data][x] 0 5. V o l u m e C o n t r o l (C o m m a n d : k f )

G To adjust volume.

[a][ ][Set ID][ ][OK/NG][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
[a][ ][Set ID][ ][OK/NG][Data][x] * Similarly, if other functions transmit 0xFF data based on this format, Acknowledgement data feed back presents status about each function. * OK Ack., Error Ack. and other message may display on the screen when TV is power On. 0 2. A s p e c t R a t i o (C o m m a n d : k c ) ( M a i n P i c t u r e S i z e )
G To adjust the screen format. (Main picture format)
You can also adjust volume with the VOLUME buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1. See page 157 Ack [f][ ][Set ID][ ][OK/NG][Data][x] 0 6. C o n t r a s t (C o m m a n d : k g ) G To adjust screen contrast. You can also adjust contrast in the PICTURE menu. Transmission
You can also adjust the screen format using the A s p e c t R a t i o in the Q.MENU. or PICTURE menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01 : Normal screen (4:3) 02 : Wide screen (16:9) 04 : Zoom 06 : Original Ack
[k][g][ ][Set ID][ ][Data][Cr] 07 : 14:: Just Scan Data Min : 00 ~ Max : 64 0B : Full Wide. * Refer to Real data mapping 1. See page 157 10~1F : Cinema Zom 1~16 Ack [g][ ][Set ID][ ][OK/NG][Data][x] 0 7. B r i g h t n e s s (C o m m a n d : k h ) G To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1 See page 157 Ack [h][ ][Set ID][ ][OK/NG][Data][x] 0 8. C o l o u r (C o m m a n d : k i )

3.4. Intellectual Property Matters (a) Third Party Claims. If Contributor has knowledge that a license under a third party's intellectual property rights is required to exercise the rights granted by such Contributor under Sections 2.1 or 2.2, Contributor must include a text file with the Source Code distribution titled "LEGAL" which describes the claim and the party making the claim in sufficient detail that a recipient will know whom to contact. If Contributor obtains such knowledge after the Modification is made available as described in Section 3.2, Contributor shall promptly modify the LEGAL file in all copies Contributor makes available thereafter and shall take other steps (such as notifying appropriate mailing lists or newsgroups) reasonably calculated to inform those who received the Covered Code that new knowledge has been obtained.
(b) Contributor APIs. If Contributor's Modifications include an application programming interface and Contributor has knowledge of patent licenses which are reasonably necessary to implement that API, Contributor must also include this information in the LEGAL file. (c) Representations. Contributor represents that, except as disclosed pursuant to Section 3.4(a) above, Contributor believes that Contributor's Modifications are Contributor's original creation(s) and/or Contributor has sufficient rights to grant the rights conveyed by this License. 3.5. Required Notices. You must duplicate the notice in Exhibit A in each file of the Source Code. If it is not possible to put such notice in a particular Source Code file due to its structure, then You must include such notice in a location (such as a relevant directory) where a user would be likely to look for such a notice. If You created one or more Modification(s) You may add your name as a Contributor to the notice described in Exhibit A. You must also duplicate this License in any documentation for the Source Code where You describe recipients' rights or ownership rights relating to Covered Code. You may choose to offer, and to charge a fee for, warranty, support, indemnity or liability obligations to one or more recipients of Covered Code. However, You may do so only on Your own behalf, and not on behalf of the Initial Developer or any Contributor. You must make it absolutely clear than any such warranty, support, indemnity or liability obligation is offered by You alone, and You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of warranty, support, indemnity or liability terms You offer. 3.6. Distribution of Executable Versions. You may distribute Covered Code in Executable form only if the requirements of Section 3.1-3.5 have been met for that Covered Code, and if You include a notice stating that the Source Code version of the Covered Code is available under the terms of this License, including a description of how and where You have fulfilled the obligations of Section 3.2. The notice must be conspicuously included in any notice in an Executable version, related documentation or collateral in which You describe recipients' rights relating to the Covered Code. You may distribute the Executable version of Covered Code or ownership rights under a license of Your choice, which may contain terms different from this License, provided that You are in compliance with the terms of this License and that the license for the Executable version does not attempt to limit or alter the recipient's rights in the Source Code version from the rights set forth in this License. If You distribute the Executable version under a different license You must make it absolutely clear that any terms which differ from this License are offered by You alone, not by the Initial Developer or any Contributor. You hereby agree to indemnify the Initial Developer and every Contributor for any liability incurred by the Initial Developer or such Contributor as a result of any such terms You offer. 3.7. Larger Works. You may create a Larger Work by combining Covered Code with other code not governed by the terms of this License and distribute the Larger Work as a single product. In such a case, You must make sure the requirements of this License are fulfilled for the Covered Code. 4. Inability to Comply Due to Statute or Regulation. If it is impossible for You to comply with any of the terms of this License with respect to some or all of the Covered Code due to statute, judicial order, or regulation then You must: (a) comply with the terms of this License to the maximum extent possible; and (b) describe the limitations and the code they affect. Such description must be included in the LEGAL file described in Section 3.4 and must be included with all distributions of the Source Code. Except to the extent prohibited by statute or regulation, such description must be sufficiently detailed for a recipient of ordinary skill to be able to understand it. 5. Application of this License. This License applies to code to which the Initial Developer has attached the notice in Exhibit A and to related Covered Code. 6. Versions of the License.

10. U.S. GOVERNMENT END USERS. The Covered Code is a "commercial item," as that term is defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial computer software" and "commercial computer software documentation," as such terms are used in 48 C.F.R. 12.212 (Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4 (June 1995), all U.S. Government End Users acquire Covered Code with only those rights set forth herein. 11. MISCELLANEOUS. This License represents the complete agreement concerning subject matter hereof. If any provision of this License is held to be unenforceable, such provision shall be reformed only to the extent necessary to make it enforceable. This License shall be governed by California law provisions (except to the extent applicable law, if any, provides otherwise), excluding its conflict-of-law provisions. With respect to disputes in which at least one party is a citizen of, or an entity chartered or registered to do business in the United States of America, any litigation relating to this License shall be subject to the jurisdiction of the Federal Courts of the Northern District of California, with venue lying in Santa Clara County, California, with the losing party responsible for costs, including without limitation, court costs and reasonable attorneys' fees and expenses. The application of the United Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12. RESPONSIBILITY FOR CLAIMS. As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to work with Initial Developer and Contributors to distribute such responsibility on an equitable basis. Nothing herein is intended or shall be deemed to constitute any admission of liability. 13. MULTIPLE-LICENSED CODE. Initial Developer may designate portions of the Covered Code as "Multiple-Licensed". "Multiple-Licensed" means that the Initial Developer permits you to utilize portions of the Covered Code under Your choice of the NPL or the alternative licenses, if any, specified by the Initial Developer in the file described in Exhibit A. EXHIBIT A -Mozilla Public License. ``The contents of this file are subject to the Mozilla Public License Version 1.1 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.mozilla.org/MPL/ Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. The Original Code is ______________________________________. The Initial Developer of the Original Code is ________________________. Portions created by ______________________ are Copyright (C) ______ _______________________. All Rights Reserved. Contributor(s): ______________________________________. Alternatively, the contents of this file may be used under the terms of the _____ license (the "[___] License"), in which case the provisions of [______] License are applicable instead of those above. If you wish to allow use of your version of this file only under the terms of the [____] License and not to allow others to use your version of this file under the MPL, indicate your decision by deleting the provisions above and replace them with the notice and other provisions required by the [___] License. If you do not delete the provisions above, a recipient may use your version of this file under either the MPL or the [___] License." [NOTE: The text of this Exhibit A may differ slightly from the text of the notices in the Source Code files of the Original Code. You should use the text of this Exhibit A rather than the text found in the Original Code Source Code for Your Modifications.]

LG 42LHLCD TV

Display
Screen size (in.): 42 Display Type: LCD Full HD (1080p): Yes Resolution: 1920 x 1080 Brightness (cd/m2): 500 Contrast Ratio: 50,000:1 Colors Reproduction (R,G,B) Bit: 10 Life Span (hr): 60,000

XD Engine: Yes

Input Details
HDMI: 3 Aspect Ratio Correction: 8modes (16:9/Just scan/Original/4:3/14:9/Zoom/ Cinema Zoom/full wide) Just Scan: HDMI/Component: 1080i / 1080p / 720p
Computec AV Ltd, Unit 7 Dominion Business Park, Goodwin Road Edmonton, London, N9 0BG Email: sales@computecgroup.com Tel. +44 (0)2002 Fax. +44 (0)3818
Eye Care (Anti Dazzling): Yes AV Mode (Cinema/Game/Sport): Yes
Audio Output: 10W + 10W Speaker System: 2 Way 4 Speakers Dolby Digital Decoder: Yes Surround System: SRS Trussurond Sound Status Mode: 5 modes (Standard/Music/Cinema/Game/Sport) Clear Voice: Yes (Clear Voice II)
Recording Time (HD/SD): No/No

USB 2.0

System Upgrade: Yes

Special Features

EPG(SI): 8 Days e-Manual: Yes Energy Saving recommended: Yes 1080P Source Input: HDMI 60p/50p/30p/24p Component 60p/50p Quick View: Yes Parental Control: Yes Child Lock: Yes Sub Title: Yes SimpLink (HDMI-CEC): Yes Image control: Yes Clock On/ Off Time: Yes Clock Sleep Timer: Yes

Jack Pack (Side)

AV In: 1 HDMI In: 1 CI slot: 1 Headphone Out: 1

Jack Pack (Rear)

RF In: 1 Full Scart: 1(TV out)
Half Scart: 1(MNT/DTV Out) Component in (Y,Pb,Pr) + Audio: 1(480i/480p/576i/576p/720p/1080i/1080p)1080p : 60p/50p Digital Audio Out (Coaxial/ Optical): 1(Optical) HDMI/HDCP Input: 2 (480p/576p/720p/1080i/1080p)- 1 Port PC Mode RGB In (D-sub 15pin) - PC: 1 PC Audio Input: 1 LAN (For Modem): 1 RS-232C (Control / SVC): 1 USB (SVC): 1(SVC)
Consumption (Typical W): 210 Stand-by (Cable card on): under 1w DC Off (W): 0.1

Weight (Kg)

SET (w/o stand kg): 15.6 Including stand (kg): 17.4

Dimensions - WxHxD (mm)

SET (w/o stand) (mm): 1028 x 658.6 x 87.8 Including stand (mm): 1028 x 715.4 x 297

Cabinet Description

Front Cabinet Style: Glossy (Silver Deco) Stand style ( color / Glare): Round/Black/Glare Swivel (angle): Yes