Reviews & Opinions
Independent and trusted. Read before buy LG 42PC1RR!

LG 42PC1RR

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
LG 42PC1RR TV, size: 7.3 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

LG 42PC1RRAbout LG 42PC1RR
Here you can find all about LG 42PC1RR like manual and other informations. For example: .

LG 42PC1RR manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a LG 42PC1RR please write about it to help other people.

 

[ Report abuse or wrong photo | Share your LG 42PC1RR photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc1

website:http://biz.LGservice.com e-mail:http://www.LGEservice.com/techsup.html

PLASMA TV SERVICE MANUAL

CHASSIS : MF-056L

MODEL : 42PC1RR

42PC1RR-ZL

CAUTION

BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.

CONTENTS

SAFETY PRECAUTIONS...3 DESCRIPTION OF CONTROLS...4 SPECIFICATIONS....10 ADJUSTMENT INSTRUCTIONS...12 TROUBLE SHOOTING GUIDE...19 BLOCK DIAGRAM...30 EXPLODED VIEW....32 EXPLODED VIEW PARTS LIST..33 REPLACEMENT PARTS LIST...34 SCHEMATIC DIAGRAM.... PRINTED CIRCUIT DIAGRAM...

SAFETY PRECAUTIONS

IMPORTANT SAFETY NOTICE
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer.

General Guidance

An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks. It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation. If any fuse (or Fusible Resistor) in this monitor is blown, replace it with the specified. When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1W), keep the resistor 10mm away from PCB. Keep wires away from high voltage or high temperature parts. Due to high vacuum and large surface area of picture tube, extreme care should be used in handling the Picture Tube. Do not lift the Picture tube by it's Neck.
Leakage Current Hot Check (See below Figure) Plug the AC cord directly into the AC outlet. Do not use a line Isolation Transformer during this check. Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts. Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity. Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5mA. In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer.
Leakage Current Hot Check circuit

AC Volt-meter

Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1M and 5.2M. When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer.
To Instrument's exposed METALLIC PARTS
Good Earth Ground such as WATER PIPE, CONDUIT etc.

0.15uF

1.5 Kohm/10W

DESCRIPTION OF CONTROLS

POWER switches the set on from standby or off to standby. INPUT Selects the TV, AV, Component, RGB or HDMI/DVI modes. switches the set on from standby.

MULTIMEDIA Selects the Component, RGB or HDMI/DVI modes.

MULTIMEDIA

switches the set on from standby. MODE Selects another device.
VCR BUT- Controls a video cassette recorder. TONS These buttons are used for X Studio. For further details, see the X Studio section. MARK Selects the wanted functions.
LIVE TV In AV1, AV2, S-Video2, AV3, AV4, Component, RGB, HDMI/DVI input sources, screen returns to the last TV programme. Brings up the HOME menu. MENU Displays on screen menus one by one. Exits the current menu. Memorizes menu changes. EXIT Clears all on-screen displays and returns to TV

viewing from any menu.

TIME SHIFT

PIP PR +

PIP IN
VOL D / E Increases/decreases sound level. (Volume Up/Down)
PR D / E Select a programme. (Programme Switchs the set on from standby. Up/Down)

LIST Q.VIEW

POSITION
MUTE Switches the sound on or off. TEXT These buttons are used for teletext.
For further details, see the Teletext section. Note : In teletext mode, the PIP PR +/-, SWAP and PIP INPUT buttons are used for teletext function. ARC Changes the picture format.

REVEAL

PIP ARC I/II
I/II Selects the language during dual language broadcast. Selects the sound output.
OK accepts your selection or displays the
current mode. Adjusts menu settings. (TIME SHIFT) Selects menu item.

TIME SHIFT TIME SHIFT

PIP Switches the sub picture on or off.
Selects PIP , POP or DW modes.
PIP PR +/- Selects a programme for the sub picture. SWAP Alternates between main and sub picture.
PIP INPUT Selects the input mode for the sub picture. SIZE Adjusts the sub picture size. POSITION Moves the sub picture to NUMBER buttons LIST Displays the programme table. Q.VIEW Returns to the previously viewed programme. SLEEP Sets the sleep timer. FAV Selects a favourite programme.

direction.

Installing Batteries
Remote control effective range
Open the battery compartment cover on the back side.
Insert two batteries in correct polarity (+ with +, with -). Dont mix old or used batteries with new ones. Close the cover.

LIVE TV

PIP PR -

PIP INPUT

PIP PR
Use a remote control 7 meter distance and 30 degree (left/right) within the receiving unit scope. Dispose of used batteries in a recyclebin to preserve environment.

Front Panel Controls

Power/Standby Indicator
illuminates red in standby mode. illuminates white when the set is switched on.
INPUT Button OK Button POWER Button MENU Button VOLUME Buttons PROGRAMME Buttons

Back Connection Panel

AV IN 4

S-VIDEO

S-VIDEO Input Connect S-Video out from an SVIDEO device. AUDIO Input Connections are available for listening stereo sound from an external device. VIDEO Input Connects the video signal from a video device.

Specification

Each part is tested as below without special appointment. 1) Temperature : 255C (779F), CST : 405 2) Relative Humidity: 6510% 3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz) * Standard Voltage of each product is marked by models. 4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with SBOM. 5) The receiver must be operated for about 20 minutes prior to the adjustment.

Test Method

1) Performance : LGE TV test method followed. 2) Demanded other specification Safety : CE, IEC specification EMC : CE, IEC Model 42PC1RR-ZL Market EU Appliance Safety : IEC/EN60065, EMI : EN55013, EMS : EN55020 Remark TEST

General Specification

1. Module Specification( 42XGA MODULE ) No 3 Item Display Screen Device Aspect Ratio PDP Module Specification 42 Wide Color Display Module 16:9 PDP42X3, RGB Closed Type 4 Operating Environment 1)Temp. : 0~40deg LGE SPEC. Film Filter Remark Plasma Display Panel
2)Humidity : 0~85% 5 Storage Environment 3)Temp. : -20~60deg
4)Humidity : 0~85% 6 Input Voltage 100-240V~, 50/60Hz Maker : SONY/ Sanken

- 10 -

2. Model General Specification No 3 Market Broadcasting system Available Channel Item EU PAL-BG/I/DK, NTSC BAND VHF/UHF CATV Receiving system Video Input (2EA) Video Output (1EA) S-Video Input (2EA) Component Input (1EA) RGB Input (1EA) PAL C1~C69 S1~S47 NTSC 2~83 1~71 Specification Remark
Upper Heterodyne PAL, SECAM, NTSC PAL, SECAM, NTSC PAL, SECAM, NTSC Y/Cb/Cr, Y/Pb/Pr RGB-PC, RGB-DTV 4 System : PAL, SECAM, NTSC, PALSystem : PAL, SECAM, NTSC, PALSystem : PAL, SECAM, NTSC, PAL60

HDMI Input (1EA)

HDMI-PC HDMI-DTV

Compatible with DVI

Audio Input (4EA) Wired Control (1EA) Audio variable out (1EA)
PC Audio, Component(1EA), AV (2EA)

L/R Input

SM,MMC,SD,MS Pro,CF,Microdrive
Available for TV Speaker Off

- 11 -

ADJUSTMENT INSTRUCTIONS

1. Application Object

These instructions is applied all of the 42 PLASMA TV, MF-056L Chassis.
3-2. Channel memory Method
1) Select PDP and Hurricane on Model dialog. And check your connection in Communication dialog. (If your connection is NG, then set your PORT.(COM1,2,3,.) correctly.) 2) Connect RS-232C cable and turn on the power. (If your connection has completed, you can see Ready.) [ If your set is not an end products but only a board, you have to make your board to Stand-by state (LED_R). And you have to Download in Stand_by power state.

2. Note

(1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument. (2) Adjustment must be done in the correct order. (3) The adjustment must be performed in the circumstance of 255C of temperature and 6510% of relative humidity if there is no specific designation. (4) The input voltage of the receiver must keep 100-220V~, 50/60Hz. (5) The receiver must be operated for about 15 minutes prior to the adjustment. After RGB Full white HEAT-RUN Mode, the receiver must be operated prior to adjustment. O Enter into HEAT-RUN MODE 1) Press the POWER ON KEY on R/C for adjustment. 2) OSD display and screen display PATTERN MODE.
[ Set is activated HEAT-RUN without signal generator in this mode. [ Single color pattern(RED/BLUE/GREEN) of HEAT-RUN mode uses to check PANEL. Caution) If you turn on a still screen more than 20 minutes, (Especially digital pattern, cross hatch pattern) after image may be occur in the black level part of the screen.
(Fig. 2) 3) Select proper CH_memory file(*.nvm) for each model at [NVRAM Download] $ [Write Batch] Next, select proper binary file(*.bin) including the CH information for each model at [NVRAM File]. File name : H2_CH_Memory_RZ.nvm 4) Click the [Download] button. It means the completion of the CH memory download if all items show OK and Status is changed by PASS at the lower right corner of the window. 5) If you want to check whether the CH information is memorized correctly or not, click the [Verify] button. And then compare NVRAM File(*.bin) with the CH information downloaded.

3. Channel memory

3-1. Setting up the LGIDS
1) Install the LGIDS. (idsinst.exe) 2) After installation, restart your PC. 3) Extract [files.zip] to folder [c:\LGIDS\files]. 4) Start LGIDS.

(Fig. 3) (Fig. 1)

- 12 -

4. Sub Program Down Load

4-1. Sub Program Down Load for Cortez
1) Select PDP and Hurricane on Model dialog. and check your connection in Communication dialog. (If your connection is NG, then set your PORT(COM1,2,3,.) correctly) 2) Connect RS232 cable and turn on the power.(Use the Special Cable For Sub-program) (If your connection has completed, you can see ) 3) Select proper Model for each model. 4) Select flash file for each model. 5) Click the [Download] button. It means the completion of the ROM download if all items show OK and Status is changed by PASS at the lower right corner of the window.

You have to select this item.

Click.

Find the file for downloading

(2) (3)

(Fig. 4)
4-2. Sub Program Down Load for DVR
1) Download Setup - You must change the DVR Download mode by using the Turbo Sound Key on the remote controller.
2) MDS Program Setup - Open the MDS Program
You cant remove the power cable while downloading

- 13 -

If Minimum Black Level and/or Maximum White Level is not correct, Do select 100% Color Bar Pattern.
6-2. Required Test Equipment
1) Remote controller for adjustment. 2) 802F Pattern Generator. ( Which has 720p YpbPr output with Standard(0.7Vpp)Vertical 100% Color Bar Pattern as Fig. 6 )
Turn power off and than turn on.(Main AC Power)
6-3. Method of Auto RGB Color Balance
1) Input the Component 720p 100% Color Bar signal into Component1 or Component2. 2) Set the PSM to Dynamic mode in Picture menu. 3) Press INSTART key on R/C for adjustment. 4) Press the G (Vol.+) key operate To set , then it becomes automatically. 5) Auto-RGB OK means completed adjustment.
5. Auto AV(CVBS) Color Balance

5-1. Requirement

This AV color balance adjustment should be performed before White Balance Adjustment. It is very import to use correct adjustment pattern like (Fig.5). A Within the pattern, color sequence should be aligned : W-Y-C-G-M-R-BLUE-BLACK. (If color sequence is reversed (Black ->.-> White), reverse the pattern with REV key, when using Master pattern generator like MSPG-925) A If Minimum Black Level and/or Maximum White Level is not correct, Do select 100% Color Bar Pattern.
(Fig. 6) Auto Component Color Balance Test Pattern
7. Auto RGB Color Balance

7-1. Requirement

5-2. Required Test Equipment
1) Remote controller for adjustment 2) AV Pattern Generator : 802F Pattern Generator, Master(MSPG-925FA), etc. (Which has PAL Composite Video format output with standard(1.0 Vpp) Vertical 100% Color Bar Pattern as Fig. 5)
5-3. Method of Auto RGB Color Balance
1) Input the PAL Composite Video (Fig.5. 100% Color Bar Pattern) into video input. ( 42PC1RR-ZL : AV3/AV4 ) 2) Set the PSM to Dynamic mode in Picture menu. 3) Press INSTART key on R/C for adjustment. 4) Press the G (Vol.+) key operate to set , then it becomes automatically. 5) Auto-RGB OK means completed adjustment.

It is very import to use correct adjustment pattern like (Fig. 7). A Within the pattern, color sequence should be aligned : W-Y-C-G-M-R-BLUE-BLACK. (If color sequence is reversed (Black ->.-> White), reverse the pattern with REV key, when using Master pattern generator like MSPG-925) A If Minimum Black Level and/or Maximum White Level is not correct, Do select 100% Color Bar Pattern.
7-2. Required Test Equipment
1) Remote controller for adjustment 2) 802F Pattern Generator, Master (MSPG-925FA), etc. ( Which has XGA 60Hz PC Format output with standard(0.7Vpp) 100 % Color Bar Pattern as Fig. 7 )
7-3. Method of Auto RGB Color Balance
1) Input the PC 1024x768 @ 60Hz 100 % Color Bar Pattern into RGB. 2) Set the PSM to Dynamic mode in Picture menu. 3) Press INSTART key on R/C for adjustment. 4) Press the G (Vol.+) key operate To set , then it becomes automatically. 5) Auto-RGB OK means completed adjustment.
(Fig. 5) Auto AV(CVBS) Color Balance Test Pattern
6. Auto Component Color Balance

6-1. Requirement

It is very import to use correct adjustment pattern like (Fig.6). A Within the pattern, color sequence should be aligned : W-Y-C-G-M-R-BLUE-BLACK. (If color sequence is reversed (Black ->.-> White), reverse the pattern with REV key, when using Master pattern generator like MSPG-925)
(Fig. 7) Auto RGB Color Balance Test Pattern

- 14 -

8. Checking DVR Function and HDD
(1) Set recoding information and check it on the scheduled list.
(Fig. 8) DVR MENU (Fig. 11) Scheduled List

8-1. Time Shift

1) Press OK button and check Time Shift is working through Progress bar is on. 2) Press after the time is 0:00:02 on the bar and check previous picture for a few seconds. ( just , is working under 30seconds) 3) Press and check a live picture back.
3) Instant Recoding. (1) Press the recoding button on remote control and record a present program for 10 seconds then press the stop button to stop recoding. (2) After finishing recoding, play the recoded clip on the Recoded TV.
(Fig. 12) Xstudio PRO MENU (Fig. 9) Time Shift Progress bar

8-2. Recoding

1) Time setting : (1) Set any time on the MENU for recoding. (Recoding cant be done under the Time is not active. When main power is off , the time will be resetted.) 2) Manual Recoding :

(Fig. 13) Recoded List

(Fig. 10) DVR MENU

- 15 -

9. POWER PCB Assy Voltage Adjustments (Va, Vs Voltage adjustments)
9-1. Test Equipment : D.M.M. 1EA 9-2. Connection Diagram for Measuring

: refer to Fig.14

10-3. Preparation for Adjustment
1) As above Fig. 6, Connect the Set, EDID Download Jig, PC & Cable. 2) Turn on the PC & EDID Download Jig. And Execute the S/W : EDID TESTER Ver,2.5. 3) Set up S/W option. Repeat Number : 5 Device Address : A0 PageByte : 8

9-3. Adjustment Method

(1) Va Adjustment
1) After receiving 100% Full White Pattern, HEAT RUN. 2) Connect + terminal of D. M.M. to Va pin of P807, connect -terminal to GND pin of P807. 3) After turning RV501,voltage of D.M.M adjustment as same as Va voltage which on label of panel right/top. (deviation; 0.5V)

(2) Vs Adjustment

1) Connect + terminal of D. M.M. to Vs pin of P807, connect -terminal to GND pin of P807. 2) After turning RV 401, voltage of D.M.M adjustment as same as Vs voltage which on label of panel right/top. (deviation ; 0.5V) 4) Power on the Set.
10-4. Sequence of Adjustment
(1) DDC data of Analog-RGB

1) Init the data.

2) Load the EDID data.(Open File). [Analog(RGB) : 42PC1RR_RGB(3A)0307.ana] (VGA,XGA) [Digital(HDMI): 42PC1RR_HDMI(1F0C)_0307.div] (XGA) (Fig. 14) Connection Diagram of power adjustment for measuring.
10. EDID (The Extended Display Identification Data)/ DDC (Display Data Channel) download
10-1. Required Test Equipment
1) Adjusting PC with S/W for writing EDID Data. (S/W : EDID TESTER Ver.2.5) 2) A Jig for EDID Download. 3) Cable : Serial(9Pin or USB) to D-sub 15Pin cable, D-sub 15Pin cable, DVI to HDMI cable.
3) Set the S/W as below. 4) Push the Write Data & Verifybutton. And confirm Yes. 5) If the writing is finished, you will see the OK message.

10-2. Setting of device

(Fig. 15) Connection Diagram of DDC download

- 16 -

6) HDMI/DVI EDID data(check sum : 1F0C)
11-2. Connecting diagram of equipment for measuring (For Auto Adjustment)
Auto adjustment Map(RS-232C) Type Baud Rate 115200 Index R Gain Data bit 8 Cmd1 Cmd2 j j j j j j a b c d e f MF-056L Stop bit 1 Parity NONE
Data Min Value Max Value 00(00) 00(00) 00(00) 00(00) 00(00) 00(00) 255(FF) 255(FF) 255(FF) 255(FF) 255(FF) 255(FF)
G Gain Protocol B Gain Setting R Offset G Offset B Offset
11-3. Adjustment of White Balance (For Manual adjustment)
7) HDMI/DVI EDID data(check sum : 1F0C)

- 23 -

5. In case of occurring strange screen into specific mode
5-1. In case the OSD does not displayed
1) LED is green. 2) The minute discharged continuously becomes. 3) Accomplished from module.
Is the LVDS cable normal ? No Is the LVDS cable connected well? No Yes Replace the cable.

Cable inserts well.

Is the VSC Board normal?
Does the FIL8662 IC (IC800) Operates ? No

Yes Replace VSC B/D

Replace FIL8662 IC (IC800).
Is the Ctrl Board of Module normal?

No Replace Ctrl B/D.

- 24 -
5-2. In case of doest display the screen into specific mode
1) The screen does not become the display from specific input mode (RF, AV, Component, RGB, DVI).
1) Check the all input mode should become normality display. 2) Check the Video(Main)/Data(Sub), Video(Main)/Video(Sub) should become normality display from the PIP mode or DW mode. (Re-Check it Swap)
(3) In case of becomes unusual display from RF mode
No Is the Tuner normal? Is the Tuner Cable connected well? No Yes Cable inserts well. No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC. Yes Is the Input voltage, IIC Communication and CVBS output normal? No Replace the Tuner.
Is the CXA2069Q normal? Yes Is the FIL8662 normal?
Is normal the Input voltage, IIC Communication and HV sync?

No Replace the IC.

(4) In the case of becomes unusual display from RF, AV mode
Is the CXA2069Q normal? Yes Is the FIL8662 normal? No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC. No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC.
(5) In the case of becomes unusual display from Component, RGB mode
Is the FIL8668 normal? No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC.
(6) In the case of becomes unusual display from HDMI mode
Is the ANX9021 normal? Yes Is the FIL8662 normal? No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC. No Is the Input voltage, IIC Communication and HV sync normal? No Replace the IC.

- 25 -

6. In case of no sound
1) LED is white. 2) Screen display but sound is not output.
Is the SPK cable normal? No Is the SPK cable connected well? No Yes Cable inserts well. Yes Replace SPK cable.
Is the RF/ AV/ Component/ RGB/ HDMI sound normal?
Does IC400 Operates ? No Replace IC400.
Does IC404 Operates ? No Replace IC404.

Replace VSC B/D.

- 26 -
7. Time shift Mode ( DVR BOARD )
1) Doesnt work time shift mode. 2) Cant enter to recorded list. 3) Cant record AV/RF.
Yes Is time shift mode on?
Are the cables connected well?(12pin, 4pin,40pin) No
Yes Power B/D works well? Yes HDD jumper is located in Master? Yes 31pin flat cables are connected well?

No Change power B/D.

Insert cables well.
Place jumper to master position.

No Connect 31pin cable.

Yes Check U1, U7, U11 and These ICs are wrong? Yes No Change the HDD Is it ok? No

Change ICs?

Change the DVR B/D.
Change time shift mode from off to on.

- 27 -

8. Time shift sound and Recorded video sound ( DVR BOARD )
1) SOUND doesnt come out.
Yes MUTE key on? No Yes Sound cable is OK? Are power cables connected well. No No Connect power cables /power B/D. Connect speak cable Sound is ok? No Check U13, U14, U1, U7 Check MSP(IC406), IC404 Is it ok? Check speakers Are they ok? Yes No Change the ICs Is it ok? Yes Is 31pin cable ok? Yes No Change the speakers. No Connect 31p cable. Turn off the mute key.

Yes Change B/D.

- 28 -
9. Recorded video ( DVR BOARD )
1) Cant play the recorded video.
Check 31pin flat cable Is it ok? Yes Yes Connect 31pin well. Yes1 Yes2 Check 40pin, 4pin HDD cable Is it ok? No Check U11, U1, U7 Is it ok? No Remove the recorded lists and Record one more time and Play again Is it ok?

Connect cable well.

Check 2068(IC1206) Is it ok? No Change HDD Is it ok? No Change B/D.

- 29 -

BLOCK DIAGRAM

- 30 -

- 31 -

EXPLODED VIEW

121 601

301 304

580 206

203 240

520 430

- 32 -

EXPLODED VIEW PARTS LIST
The components identified by mark critical for safety. Replace only with part number specified.

Part No.

6400WMCX03A 6400DTTX02B 6348Q-E066H 6348Q-E128J 6871QCH077A 6871QDH117A 6871QLH059A 6871QRH068A 6871QYH053B 6871QZH056B 4980900109A 4980900109C 4980900109B 4980900109D 30919E0024B 30919E0024W 4980900113A 4980900113B 4980900114A 4980900114B 4980900115A 4980900115B 4980900116A 4980900116B 3809900103B 3809900103R 3501900014A 3501900014C 3301900095M 3301900095S 3301900112B 3301900112C 68719MMU56A 68719MMX36A 68719MMV03A 6744BSUN18A 6744BSUN18B 4980900138C 31419SNK34A 31419SNK40A 31419SNK73A 31419SN971A

Descriptions

Speaker, Woofer ND35 15W 8OHM 82DB 100HZ 193X57mM LUG Speaker, Tweeter EN15D-6659 TOPTONE TWEETER(DOME) 8OHM 15/20W 78DB OTHERS PC1 MODEL PDP, Module-XGA PDP42X30201.AKLGG XGA 42INCH 1024X768 16/9 LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) PDP,Module-XGA PDP42X30201.ADLGB XGA 42INCH 1024X768 16/9 PCB Assembly, Display CTRL ASSY HAND INSERT 42HD 42X3 CTRL ASSY HAND PCB Assembly, Display YDRV ASSY HAND INSERT 42HD 42X3 YDRV HAND INSERT PCB Assembly, Display XRLT ASSY HAND INSERT 42HD 42X3 XRLT ASSY HAND PCB Assembly, Display XRRT ASSY HAND INSERT 42HD 42X3 XRRT ASSY PCB Assembly, Display YSUS ASSY HAND INSERT 42HD 42X3 VER.B PCB Assembly, Display ZSUS ASSY HAND INSERT 42HD 42X3 VER.B Supporter, COMPLEX ASSY AL 42PC1R-TA, VERTICAL RIGHT LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Supporter, ASSY AL 42PC1R-TA, VERTICAL RIGHT, C/SKD Supporter, COMPLEX ASSY AL 42PC1R-TA, VERTICAL LEFT LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Supporter, ASSY AL 42PC1R-TA, VERTICAL LEFT, C/SKD Cover Assembly, 42PC1RR-ZL BRAND 30909E0008A 3211900003A(LG) LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Cover Assembly, 42PC1RR-ZL BRAND 30909E0008 3211900003A.C/SKD Supporter, COMPLEX ASSY AL FILTER TOP 42PC1R-TA LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Supporter, ASSY AL FILTER TOP 42PC1R-TA C/SKD Supporter, COMPLEX ASSY AL FILTER BOTTOM 42PC1R-TA LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Supporter, ASSY AL FILTER BOTTOM 42PC1R-TA C/SKD Supporter, COMPLEX ASSY AL FILTER RIGHT 42PC1R-TA LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Supporter, ASSY AL FILTER RIGHT 42PC1R-TA, C/SKD Supporter, COMPLEX ASSY AL FILTER LEFT 42PC1-TA LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Supporter, ASSY AL FILTER LEFT 42PC1-TA, C/SKD Cover Assembly, 42PC1D NON DIGITA LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Cover Assembly, 42PC1 NON LGEMA ASSY ONLY (DIGITAL) Base Assembly, D/T SPK STAND AP-42DC11 MF056A FOLDING STAND LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Base Assembly, AP-42DC11 MF056A D/T SPK STAND FOLDING STAND LGERS C/SKD Plate Assembly, AV 42PC1RR-ZL LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Plate Assembly, AV ANALOG PVR / CKD Plate Assembly, ASSY ANALOG PVR COVER/42PC1RR-ZL LGEGF(U.A.E)/ISRAEL/LGEMC(MOSCOW) Plate Assembly, ASSY ANALOG PVR COVER/42PC1RR-ZL(C/SKD) PCB Assembly, Main M.I MF056L MAIN1 42PC1RR-ZL AEULLHX ANALOG PVR PCB Assembly, Main M.I MF056L MAIN1 42PC1RR-ZL KETLLMP 42PC1RR-ZL.KETLLMP MAIN1 FOR CK PCB Assembly, Main M.I MF056L MAIN2 42PC1RR-ZL AEULLHX ANALOG PVR HDD,3.5, ST380012ACE SEAGATE 80GB ULTRA ATA/66/100 INNER FOR 7200RPM HDD,3.5 ST380012ACE SEAGATE 80GB ULTRA ATA/66/100 INNER FOR 7200RPM TONKA 2 Supporter, ASSY SECC(EGI) HDD 50PCIDRA PRESS Chassis Assembly, MF056L SUB 42PC1RR-ZL HDD ASSY FOR SKD Chassis Assembly, MF056L SUB 42PC1RR-ZL HDD ASSY FOR SKD, SPAIN Chassis Assembly, MF056L SUB ANALOG DVR HDD FOR CKD Chassis Assembly, SUB MF056L SUB 42PC1RR-ZL HDD ASSY LGEGF(U.A.E)/ H.Y.C(ISRAEL)/LGEMC(MOSCOW) PCB Assembly,Sub SUB M.I PP62A 42PC1R AMLLKX CLRT PCB Assembly, Sub M.I MF056L SUB 42PC1RR-ZL KETLLMP ANALOG DVR PREAMP FOR CKD PCB Assembly,Sub SUB M.I MF056L 42PC1RR-ZL AEULLHX ANALOG PVR PREAMP U.A.E / ISRAEL/MOSCOW PCB Assembly,Sub M.I MF056L SUB 42PC1RR-ZL SETLLJP DMS SKD PREAMP PCB Assembly, Sub M.I MF056L SUB 42PC1RR-ZL SETLLJP DMS SKD PREAMP SPAIN PCB Assembly, Sub SUB M.I MF056L 42PC1RR-ZL KETLLMP Power Supply Assembly, LGIT PDP UNIFICATION PSU PA61B 400W 42PB2D 42INCH PCB Assembly,Sub M.I MF056L SUB 42PC1RR-ZL AUELLHX ANALOG PVR SIDE AV PCB Assembly, Sub SUB M.I MF056L 42PC1RR-ZL AUELLHX ANALOG DVR U.A.E / ISRAEL/MOSCOW PCB Assembly, Sub M.I MF056L SUB 42PC1RR-ZL KETLLMP ANALOG DVR Bracket Assembly, 42PC1RR-ZL MF056L SIDE AV ANALOG-PVR, EU Bracket Assembly, 42PC1RR-ZL PA52D SIDE AV C/SKD Plate, PRESS SPTE T0.3 SIDE AV 42PC1R

For Capacitor & Resistors, the charactors at 2nd and 3rd digit in the P/No. means as follows;
CC, CX, CK, CN : Ceramic CQ : Polyestor CE : Electrolytic
RD : Carbon Film RS : Metal Oxide Film RN : Metal Film RF : Fusible
LOCA. NO Q304 Q305 Q306 Q307 Q400 Q401 Q402 Q403 Q404 Q405 Q406 Q407 Q408 Q409 Q410 Q411 Q412 Q413 Q700 Q701 Q702
PART NO 0TR387500AA 0TR150400BA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR102009AM 0TR387500AA 0TR387500AA 0TR102009AM 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA
DESCRIPTION 2SC3875S NPN 5V 60V 50V 150MA KTA1504S PNP -5V -50V -50V -0.15A 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA KRA102S PNP -30V - -50V -0.1A 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA KRA102S PNP -30V - -50V -0.1A 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA 2SC3875S NPN 5V 60V 50V 150MA
LOCA. NO D504 D505 D506 ZD300 ZD301 ZD400 ZD401 ZD600
PART NO 0DR050008AA 0DR050008AA 0DR050008AA 0DR050008AA 0DR050008AA 0DZRM00248A 0DZRM00248A 0DR050008AA
DESCRIPTION SD05 - 6V 14.5V 24A 350W SOD323 SD05 - 6V 14.5V 24A 350W SOD323 SD05 - 6V 14.5V 24A 350W SOD323 SD05 - 6V 14.5V 24A 350W SOD323 SD05 - 6V 14.5V 24A 350W SOD323 RLZ8.2B 8200MV 7.78TO8.19V 8OHM RLZ8.2B 8200MV 7.78TO8.19V 8OHM SD05 - 6V 14.5V 24A 350W SOD323

CAPACITOR

BC1 BC10 BC100 BC101 BC102 BC103 BC104 BC105 BC106 BC107 BC108 BC109 BC11 BC110 BC111 BC112 BC113 BC114 BC115 BC116 BC117 BC118 BC119 BC12 BC120 BC121 BC122 BC123 BC124 BC125 BC126 BC127 BC128 BC129 BC13 BC130 BC131 BC132 BC133 BC134 BC135 BC136 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0CK104CK56A 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R 0603B104K500CT 100n 10% 50V X7R

C1 C2 C3 C4 C5 C6 C7 C8 C9 C10 C11 C12 C13 C14 6631900012C 6631900027C 6631900048C 6631900065C 6631900097A 6631900098A 6631900099C 6631900101B 6631900104C 6631900105C 6631900106A 6631900119A 6631T39004D 6631V39013N Harness,SingleSMH250 SMH250 200mM 2.50MM Harness,Single SMH250 SMH250 200mM 2.50MM Harness,SingleSMH200 SMH200 250mM 2.00MM Harness,SingleSMH250 SMH250 350mM 2.50MM Harness,SingleSMH250 110T/205T 350_500mM 2.50MM Harness,SingleSMH250 110T/205T 350_500mM 2.50MM Harness,SingleSMH250 SMP250 400mM 2.50MM Harness,SingleSMH200 SMP250 600mM 2/2.5MM Harness,SingleSMH200 SMH250 300mM 2/2.5MM Harness,SingleSMH200 SMP250 700mM 2.5/2.0MM Harness,SingleSMH200 SMH250 300mM 2.5/2.0MM Harness,Single(AMP)770827-1 YH396 150mM 3.96MM Harness,Single 1-1123722-9 1-1123722-9 220mM Harness,Single1-1123722-8 1-1123722-8 900mM
LOCA. NO CN1 CN2 CN3 CN8 CN9 JK500 JK601 P500 P501
PART NO 6630B00159A 6630VZS0110 6630B00169A 6630VE00731 6630VE00731 6630G70016A 6630G70017A 6630VE00731 6630VE00731
DESCRIPTION Conector,BtoBSPG-SH2S-0601-01 40P 2.54MM Conector,BtoBYFDW254-10 10P 2.54MM Conector,BtoBFCS243-60G02 60P 1.27MM Conector,FFC/FPC/PIC10022HS-31A02 31P 1.00MM Conector,FFC/FPC/PIC10022HS-31A02 31P 1.00MM Conector,DSUBA03-7071-094 D-SUB 15P 2.29MM Conector,DSUBA02-0915-101 D-SUB 9P 2.54MM Conector,FFC/FPC/PIC10022HS-31A02 31P 1.00MM Conector,FFC/FPC/PIC10022HS-31A02 31P 1.00MM

LOCA. NO LD101

PART NO 0DLAU0410AA
DESCRIPTION SAW5670 ROUND 5mM AMBER/WHITE

SWITCH

SW101 SW102 SW103 SW104 SW105 SW106 SW107 SW108 SW700 SW800 140-313B 140-313B 140-313B 140-313B 140-313B 140-313B 140-313B 140-313B 6600VR1004A 6600VR1004A Tact, KPT-1115AM 1C1P 12VDC 0.05A Tact, KPT-1115AM 1C1P 12VDC 0.05A Tact, KPT-1115AM 1C1P 12VDC 0.05A Tact, KPT-1115AM 1C1P 12VDC 0.05A Tact, KPT-1115AM 1C1P 12VDC 0.05A Tact, KPT-1115AM 1C1P 12VDC 0.05A Tact, KPT-1115AM 1C1P 12VDC 0.05A Tact, KPT-1115AM 1C1P 12VDC 0.05A Tact, SKHMPWE010 1C1P 12VDC 0.05A Tact, SKHMPWE010 1C1P 12VDC 0.05A

RESISTOR

AR700 AR701 AR702 AR703 AR704 AR705 AR806 AR807 AR808 AR809 AR810 AR811 AR812 AR813 AR814 AR815 AR816 AR817 PA101 R230 RN1 RN10 RN11 RN12 RN13 RN14 RN2 RN3 RN4 RN5 RN6 RN7 RN8 RN9 0RJ0222C687 0RJ0222C687 0RJ0222C687 0RJ0222C687 0RJ0222C687 0RJ0222C687 0RJ0512C687 0RJ0512C687 0RJ0512C687 0RJ0512C687 0RJ0512C687 0RJ0512C687 0RJ0512C687 0RJ0512C687 0RJ0512C687 0RJ0512C687 0RJ0512C687 0RJ0512C687 6712000011B 0RD0331H609 0RR1002Q62A 0RJ0222C687 0RJ0222C687 0RJ0222C687 0RJ0222C687 0RJ0222C687 0RR1002Q62A 0RR1002Q62A 0RJ0222C687 0RJ0222C687 0RJ0222C687 0RJ0222C687 0RJ0222C687 0RJ0222C687 RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% RCA86TRJ51R0 51OHM 5% KSM-2013TE2A 4.5TO5.5V RD-92T1J3R30 3300MOHM RCA86TRJ10K0 10KOHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ10K0 10KOHM 5% RCA86TRJ10K0 10KOHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5% RCA86TRJ22R0 22OHM 5%

JK100 JK101 JK101 JK103 JK104 JK105 JK1200 6612J00043C 6612J10033A 6612J00043C 6612J10031A 6612J10003W 6612F00024C 6612B00015B Jack,ScartUPJ-R1-031 21P 21P/1C Jack,ComplexPMJ016-13 13P DIN/RCA Jack,ScartUPJ-R1-031 21P 21P/1C Jack,RCAPPJ209-02 14.0MM 1RX5C Jack,RCAKCN-BT-0-0048 14.0MM Jack,DINPSJ014-01 SOCKET 4P ANGLE Jack,DINDC1R019WDH SOCKET 21P
The components identified by mark critical for safety. Replace only with part number specified. LOCA. NO JK200 JK400 JK501 JK600 PART NO 6612J10025A 6612J10002B 6612F00099A 6612F00099A
DESCRIPTION Jack,ComplexKCN-BT-0-0055 4P PAL/RCA Jack,RCAPPJ200-01 14.0MM 1RX2C Jack,PhonePEJ024-01 1P 4P STRAIGHT Jack,PhonePEJ024-01 1P 4P STRAIGHT

LOCA. NO A4

PART NO 4972V00178B
DESCRIPTION Supporter, WALL FOLDING STAND ONLY
CN6 CN7 CW1 CW2 P1 P100 P1001 P101 P101 P101 P1100 P1103 P1104 P300 P401 P401 P402 P800 P802 P803 P805 6602T25008L 6602Q39005A 366-036B 366-036B 6602T20009C 6602T20009J 6602T25008M 6602T20009C 6602T20009C 6602T20009L 6602T25008J 6602T12007D 6602T25008B 6602T20009L 6602T25008B 6602T25008C 6602T25008C 6602T20008J 6602T20008J 6602T12007D 6602T12007D Conector,Wafer SMW250-12P 12P 2.50MM Conector,Wafer 1-1123723-4 4P 3.96MM Conector,Wafer 53014-1210 12P 2.00MM Conector,Wafer 53014-1210 12P 2.00MM Conector,Wafer SMAW200-04P 4P 2.00MM Conector,Wafer SMAW200-10P 10P 2.00MM Conector,Wafer SMW250-13P 13P 2.50MM Conector,Wafer SMAW200-04P 4P 2.00MM Conector,Wafer SMAW200-04P 4P 2.00MM Conector,Wafer SMAW200-12P 12P 2.00MM Conector,Wafer SMW250-10P 10P 2.50MM Conector,Wafer GT121-31P-TD 31P 1.25MM Conector,Wafer SMW250-03P 3P 2.50MM Conector,Wafer SMAW200-12P 12P 2.00MM Conector,Wafer SMW250-03P 3P 2.50MM Conector,Wafer SMW250-04P 4P 2.50MM Conector,Wafer SMW250-04P 4P 2.50MM Conector,Wafer SMW200-10P 10P 2.00MM Conector,Wafer SMW200-10P 10P 2.00MM Conector,Wafer GT121-31P-TD 31P 1.25MM Conector,Wafer GT121-31P-TD 31P 1.25MM

MISCELLANEOUS

CA1 CA2 CA3 CA4 CA5 CA6 IC603 IC900 S1 TU206 TU207 6631900100D 6631T11017J 6631V10008A 68509A0004J 68509C0001A 6850J00005C 0IPRPNS054A 692791167AD 692791176AA 6700MF0012A 6700MF0012C Cable & Wire,Unclassified4P 2.5MM 600MM Cable,FFCSML2SC-31(4)x92-BDx8(BL) Cable,FFC31Px50xP7x1.0x(0.1x0.65) CABLE,COAXIALRCA R/A TO RCA R/A UL Cable,AssemblySP-FC-40P IDC TYPE CONNECTOR(F) Cable,Assembly GT121 HOUSING GT121 0.6M Sensor,TemperatureLM75CIMX-3 3TO5.5V SOP S/W,FirmwareV2.04 59C2 EUROPE FLASH S/W,FirmwareV2.00 ED89 EUROPE FLASH Tuner,Tuner/ModulatorTAUM-W101P LGIT MULTI Tuner,Tuner/ModulatorTAFM-W103P LGIT MULTI

 

Tags

Controller TV32RN10D Intrigue 2002 CDE-9850RI Pega-JC40K AM-672 HT33S FP783 Freelancer Sbig ST-4 Smartphone Dreamweaver ER9004B KP-51PS2 03 MW3-245GE Toshiba D-R1 ZR850 GA-P31-ds3L RC136 HL-730 Ryobi P201 TM-T90 DSP-AZ2 Supplement 10CHG VCL-HGA07 Extensa 5430 WA 162 Bicphone DBS 2781 Pathfinder-2006 DW12-CFE 2S Cateye ATC MV16P DSC-P93 MP620 CDX-L350 Psus4 950 Live SAL-70400G Router DMC-FZ30GK PMA-2000R 12 5 Nokia 6650 Audi S6 M-J400 C18AWR Evil EYE EL-2631L MES-330 42LG7000 CDP-XB630 MP-375SD Falk N120 ES1719 NWZ-W202 Ezl24025-B406 C782N RQ-2102 KX-TG7301HG LCD4000 AL1914 S7010 Starcraft P5MT-M Intermatic SS7C PCG-Z600TEK Firstscope 70EQ SMX-C10rn RED HDB71 VR 5000 Navigator 7 Imedia 6412 M893 IS 69NT40-531 LW050 Iden I205 IPF710 VGN-FS315H PEG-S300 E Urc 4330 Sofa BED CL 600 Escape-2001 Temporis MAX Flash Platinum T Zoom DVP-NS705V Videostudio 11 SC-55 Davs500 CDX-396 UBT880 A8-S8314 SGH-E420 Asus Z92K PSC 1410

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101