PROFESSIONAL GALERY S.L. - http://www.intersonido.com/
Accesorios (27) |___ conectores (27) |___ neutrik (27) |___ crest audio Agujas (17) |___ ortofon (10) |___ stanton (7) Auriculares (8) |___ akg (4) |___ akg DJ |___ akg Hi-fi |___ akg studio (4) |___ numark |___ pioneer |___ sennheiser (2) |___ sennheiser DJ (2) |___ sennheiser Hi-fi |___ stanton |___ technics (2) Bafles (52) |___ behringer (5) |___ bose (5) |___ dynacord (2) |___ electro voice (2) |___ jbl (10) |___ wharfedale (28) Cpsulas (39) |___ numark |___ ortofon (29) |___ shure |___ stanton (10) Etapas (29) |___ behringer (3) |___ crest audio (9) |___ crown (8) |___ ecler (3) |___ samson (3) |___ wharfedale (3)
hi-fi (1) |___ denon (1) Mezcladores (13) |___ Mezclador DJ (13) |___ American Audio (8) |___ Denon (4) |___ Technics (1) |___ Mezclador estudio/directo Microfonos (90) |___ AKG (82) |___ BLUE LINE (10) |___ CONDENSADOR (15) |___ MIC. LEVALIER (13) |___ MIC. DIADEMA (9) |___ MICROMIC III (18) |___ SER. TRIPOWER (6) |___ SER.EMOTION (3) |___ ULTRA LINEAR (8) |___ SHURE (8) Platos (3) Televisores (5) |___ plasmas (2) |___ proyectores (3) CDs (10) |___ Doble (3) |___ Simple (7)

Accesorios

conectores ---> neutrik
NEUTRIK NA 3F 5M NEUTRIK 8.00EUR
NEUTRIK NA 3 M 5F NEUTRIK 8.64EUR
NEUTRIK NA 2 FP MM NEUTRIK 6.91EUR
NEUTRIK NA 2 MP MM NEUTRIK 6.91EUR
NEUTRIK NA 2 FP MF NEUTRIK 6.41EUR
NEUTRIK NA 2 MP MF NEUTRIK 6.38EUR
NEUTRIK NA 2 MB NC NEUTRIK 7.09EUR
NEUTRIK NA 2 FB NC NEUTRIK 7.20EUR
NEUTRIK NA 3 MP NEUTRIK 7.20EUR
NEUTRIK NA3FP NEUTRIK 7.19EUR
NEUTRIK NA2MP NEUTRIK 6.38EUR
NEUTRIK NA2FP NEUTRIK 6.38EUR
NEUTRIK NA3MJ NEUTRIK 8.12EUR
NEUTRIK NA3FJ NEUTRIK 8.35EUR
NEUTRIK NA3FM NEUTRIK 5.68EUR
NEUTRIK NA3MM NEUTRIK 5.56EUR
NEUTRIK NA3FF NEUTRIK 5.80EUR
NC-5 MDL1 NEUTRIK 6.67EUR
NC-3 MDL1 NEUTRIK 2.77EUR
NC-5 FDL1 NEUTRIK 6.67EUR
NC-3 FDL1 NEUTRIK 2.98EUR

NC-3 MRC NEUTRIK 4.66EUR

NP-3 FRC NEUTRIK 5.39EUR

NC-5 MX NEUTRIK 5.07EUR

NC-5 FX NEUTRIK 6.09EUR

NC-3 MX NEUTRIK 2.30EUR

NEUTRIK NC-3 FX NEUTRIK 2.71EUR

Agujas

Agujas ---> ortofon
CONCORDE Q BERT ORTOFON 33.87EUR
CONCORDE GOLD ORTOFON 47.79EUR
CONCORDE ELEKTRO ORTOFON 26.22EUR
CONCORDE PRO S ORTOFON 17.98EUR
CONCORDE PRO ORTOFON 22.39EUR
CONCORDE NIGHT CLUB E ORTOFON 40.25EUR
CONCORDE NIGHT CLUB S ORTOFON 32.48EUR
CONCORDE SCRATCH ORTOFON 25.52EUR
ORTOFON DJS ORTOFON 25.52EUR
AGUJA CONCORDE DJE ORTOFON 31.32EUR

Agujas ---> stanton

STANTON GROOVEMASTER STANTON 49.88EUR
STANTO TRACKMASTER SK DP STANTON 46.40EUR
STANTON DISCMASTER STANTON 16.47EUR
STANTON 6800 STANTON 99.76EUR
STANTON 8900 SA-DP STANTON 36.54EUR
STANTON 5100 SK DP STANTON 49.88EUR
AGUJA STANTON 5100 AL II DP STANTON 45.24EUR

Auriculares

akg ---> akg studio
AKG K271 STUDIO AKG 163.56EUR
AKG K171 STUDIO AKG 134.56EUR
AKG K-240 STUDIO AKG 135.72EUR
AKG K141 STUDIO AKG 110.20EUR
sennheiser ---> sennheiser DJ
HD-25 SENNHEISER 204.16EUR
HD-25/SP SENNHEISER 107.88EUR
Auriculares ---> technics
TECHNICS RPDH1200E-S TECHNICS 160.08EUR
RP-DJ1210E-S TECHNICS 106.72EUR

Bafles

Bafles ---> behringer

CONCORDE GOLD KIT ORTOFON 136.88EUR
CONCOPRDE ELEKTRO TWIN ORTOFON 140.36EUR
CONCORDE ELEKTRO KIT ORTOFON 85.84EUR
CONCORDE PRO S TWIN ORTOFON 104.40EUR
CONCORDE PRO S KIT 64.96EUR
CONCORDE PRO TWIN ORTOFON 117.16EUR
CONCORDE PRO KIT ORTOFON 69.60EUR
CONCORDE NIGHT CLUB E TWIN ORTOFON 177.48EUR
CONCORDE NIGHT CLUB E KIT ORTOFON 118.32EUR
CONCORDE NIGHT CLUB S TWIN ORTOFON 163.56EUR
CONCORDE NIGHT CLUB S KIT ORTOFON 105.56EUR
CONCORDE SCRATCH TWIN 132.24EUR
CONCORDE SCRATCH KIT ORTOFON 83.52EUR
CONCORDE DJS TWIN ORTOFON 127.60EUR
CONCORDE DJS KIT ORTOFON 81.20EUR
CONCORDE DJE TWIN ORTOFON 139.20EUR
CONCORDE Q/BERT KIT ORTOFON 99.76EUR
CONCORDE DJE KIT ORTOFON 90.48EUR
CONCORDE PRO S ORTOFON 56.84EUR
CONCORDE PRO ORTOFON 60.32EUR
CONCORDE NIGHT CLUB E ORTOFON 90.48EUR
CONCORDE NIGHT CLUB S ORTOFON 90.48EUR
CONCORDE SCRATCH ORTOFON 71.92EUR
CONCORDE GOLD ORTOFON 132.24EUR
CONCORDE ELEKTRO 76.56EUR
CONCORDE DJS ORTOFON 66.12EUR
CONCORDE DJE ORTOFON 70.76EUR

Cpsulas ---> stanton

STANTON TRACKMASTER II SK MP4 STANTON 206.48EUR
STANTO GROVEMASTER II PRO M4P STANTON 255.20EUR
STANTO TRACKMASTER II SK STANTON 104.40EUR
STANTON DISCMASTER STANTON 75.40EUR
STANTON 890 SA STANTON 84.68EUR
STANTON 680 EL II STANTON 66.12EUR
STANTON 520 SK STANTON 44.08EUR
STANTON 505 SK STANTON 40.60EUR
STANTON 500 AL TWIN STANTON 55.68EUR
STANTON 500 AL II STANTON 32.48EUR

Etapas

Etapas ---> behringer
BEHRINGER A500 BEHRINGER 191.40EUR
BEHRINGER EP 2500 BEHRINGER 359.60EUR
BEHRINGER EP15OO BEHRINGER 313.20EUR
Etapas ---> crest audio
CREST AUDIO CA18 CREST AUDIO 2088.00EUR
CREST AUDIO CA12 CREST AUDIO 1566.00EUR
CREST AUDIO CA9 CREST AUDIO 1264.40EUR
CREST AUDIO CA6 CREST AUDIO 928.00EUR
CREST AUDIO CA4 CREST AUDIO 788.80EUR
CREST AUDIO CA2 CREST AUDIO 614.80EUR
CREST AUDIO CPX2600 CREST AUDIO 649.60EUR
CREST AUDIO CPX1500 CREST AUDIO 475.60EUR
CREST AUDIO CPX900 CREST AUDIO 382.80EUR

Etapas ---> crown

CROWN CROWN 2122.80EUR
CROWN K-1 CROWN 1832.80EUR
CROWN CE-4000 CROWN 2315.36EUR
CROWN CE-2000 CROWN 1061.40EUR
CROWN CE-1000 CROWN 771.40EUR
CROWN XLS-602 CROWN 497.64EUR
CROWN XLS-402 CROWN 392.08EUR
CROWN XLS-202 CROWN 316.68EUR

Etapas ---> ecler

ECLER MPA/6-80 ECLER 625.24EUR
ECLER MPA/4-400 ECLER 1015.00EUR

ANTENNA IN

COMPONENT IN

VARIABLE AUDIO OUT

DIGITAL AUDIO OUT

OPTICAL

RS-232C IN RS-232C IN (CONTROL & SERVICE)
PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.
RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. Component Input Connect a component video/audio device to these jacks.
RGB/DVI Audio Input Connect the monitor output from a PC to the appropriate input port.
Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
Antenna Input Connect over-the-air signals to this jack. DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.

Only 42/50PC3*

EJECT PCMCIA CARD SLO SLOT EJECT HDMI/DVI IN AV 1 HDMI IN 2 AV ANTENNA IN
VIDEO AUDIO DIGITAL AUDIO OUT VIDEO

CMCIA D SLOT

RGB (PC) AUDIO (RGB/DVI)

AUDIO UDIO

COMPONENT IN ANTENNA IN RS-232C IN RS-232C IN (CONTROL & SERVICE)

S-VIDEO

VIDEO L/MONO AUDIO R
Audio/Video Input Connect audio/video output from an external device to these jacks.

HDMI IN 1 2

PCMCIA RGB IN CARD SLOT

AV 1 EJECT AV 2

HDMI/DVI ANTENNA ININ 1

HDMI IN 2

RGB(PC) AUDIO IN (RGB/DVI)

VIDEO AUDIO

RS-232C IN (CONTROL & SERVICE)
S-Video Input S-VIDEO Connect S-Video out from an SVIDEO device.

AV IN 2

HDMI/DVI HDMI/D IN 1

HDMI IN 3

PCMCIA CARD SLOT SLO

RGB IN 2

RGB(PC)

AUDIO IN (RGB/DVI)

PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. Antenna Input Connect over-the-air signals to this jack. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.
Component Input Connect a component video/audio device to these jacks. RGB/DVI Audio Input Connect the monitor output from a PC to the appropriate input port. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

In poor signal areas,to get better picture quality, install a signal amplifier to the antenna as shown to the right. If signal needs to be split for two TVs,use an antenna signal splitter for connection.
This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.However,if you do receive Digital signals from a digital set-top box or other digital external device,refer to the figure as shown below.
When connecting with a component cable
Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O jacks on the set. Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O jacks on the set.
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select COMPONENT input source with using the PCMCIA I N P U T button on the remote control. EJECT CARD SLOT
Signal 480i/576i 480p/576p 720p/1080i 1080p

Component

PCMCIA CARDYes SLOT
HDMI1/2/3 (HDMI3 : only 26/32LB7*)

Yes Yes No

HDMI/DVI IN 1Yes HDMI IN 2

Yes Yes

EJECT HDMI/DVI IN 1 HDMI IN 2
When connecting with a HDMI cable
PCMCIA CARD SLOT EJECT HDMI/DVI IN 1 HDMI IN 2 RGB IN

RGB(PC) AUD (RG

Connect the digital set-top box to H D M I / D V I I N 1or H D M I I N 2 jack on the set. Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select HDMI1 or HDMI2 input source with using the I N P U T button on the remote control.

COMPONENT I

AUDIO AUDI
RS-232C IN (CONTROL & SERVICE) 1

PCMCIA CARD SLOT EJECT

HDMI/DVI IN 1 HDMI IN 2 HDMI IN 3
Connect the digital set-top box to H D M I / D V I I N 1, H D M I I N 2 or H D M I I N 3 jack on the set.
RS-232C IN (CONTROL SERVICE) (CONTROL & SERVICE)

AUD (RG

Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select HDMI1, HDMI2 or HDMI3 input source with using the I N P U T button on the remote control.

AUDI UDIO

When connecting with a HDMI to DVI cable
EJECT ECT HDMI/DVI IN 1 HDMI IN 2 RGB IN
Connect theAUDIO audio output of the digital set-top box to VIDEO the A U D I O I N ( R G B / D V I ) jack on the set. Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select HDMI1 input source with using the I N P U T AV 1 AV button on the remote 2control.

ANTENNA ENNA IN

Connect the digital set-top box to H D M I / D V I I N 1 jack on the set.
1 RS-232C IN (CONTROL & SERVICE)

DMI/DVI IN 1

IN 2 HDMI IN 3

EJECT CT

AV 1 V

N ERVICE)

Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the set.
Turn on the digital set-top box. (Refer to the owners manual for the digital set-top box.) Select HDMI1 input source with using the I N P U T button on the remote control.

DVD SETUP

Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set. Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the set. Turn on the DVD player, insert a DVD.
Select COMPONENT input source with using the I N P U T button on the remote control. Refer to the DVD player's manual for operating PCMCIA EJECT CARD SLOT HDMI/DVI IN 1 instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV

Y PB PR

PCMCIA PR CARD SLOT EJECT HDMI/DVI IN 1 HDMI IN 2

PB B-Y Cb Pb

Video output ports on DVD player

R-Y Cr Pr

When connecting with a Euro Scart

PCMCIA CARD SLOT EJECT RGB IN

C) AUDIO IN (RGB/DVI)

HDMI/DVI IN 1 HDMI IN Connect the Euro scart socket of the DVD to the2A V 1 Euro scart socket on the set.

PONENT IN

Turn on the DVD player,ANTENNA a DVD. insert
Select AV1 input source with using the I N P U T button on the remote control. RS-232C IN If connected to AV2 Euro scart socket, select AV2 input source. Refer to the DVD player's manual for operating instructions.

AUDIO/ VIDEO

(R) AUDIO (L)
If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.
When connecting with an S-Video cable

VIDEO S-VIDEO

ANT IN
Connect the S-VIDEO output of the DVD to the S V I D E O input on the set. Connect the audio outputs of the DVD to the A U D I O input jacks on the set. Turn on the DVD player, insert a DVD. Select AV3 input source with using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.

OUTPUT SWITCH

ANT OUT
MONO VIDEO L/MONO AUDIO R
PCMCIA CARD SLOT EJECT HDMI/DVI IN 1 HDMI IN 2
When connecting HDMI cable

AV 1 AV 2

PCMCIA CARD SLOT EJECT HDMI/DVI IN 1 HDMI IN 2 R

MI IN 2

Connect the HDMI output of the DVD to the H D M I / D V I I N 1 or H D M I I N 2 jack on the set.
Select HDMI1or HDMI2 input source with using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.

Only 26/32LB7* 1

Connect the HDMI output of the DVD to the H D M I / D V I I N 1, H D M I I N 2 or H D M I I N 3 jack on the set.
PCMCIA CARD SLOT EJECT JECT
Select HDMI1, HDMI2 or HDMI3 input source with using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.
TV can receive the video and audio signal simultaneously with using a HDMI cable. If the DVD does not support Auto HDMI, you need to set the output resolution appropriately.

INSERTION OF CI MODULE

- To view the scrambled (pay) services in digital TV mode. - This feature is not available in all countries.

PCMCIA CARD SLOT EJECT HDMI IN 1 HDMI IN 2

OPTICA

Insert the CI Module to P C M C I A (Personal Computer Memory Card International Association) C A R D S L O T of TV as shown. For further information, see p.54.
RS-232C RS-232 IN (CONTROL &

VCR SETUP

To avoid picture noise (interference), leave an adequate distance between the VCR and TV. I Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of PCMCIA EJECT the screen may CARD SLOT remain visible on theHDMI/DVI IN 1 screen. HDMI IN 2
When connecting with an antenna

DIGITAL AUDIO OU

Wall Jack
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the set.
Connect the antenna cable to the A N T I N socket of the VCR.
Press the P L A Y button on the VCR and match the appropriate programme between the TV and VCR for viewing.

B(PC) AUDIO IN (RGB/DVI)

VI IN 1
Connect the Euro scart socket of the VCR to the A V 1 Euro scart AV 1 AV 2the set. socket on
IN Insert a video tape into the VCR and press PLAY on VIDEO the VCR. (Refer to the VCR owners manual.)

MPONENT IN

ANTENNA
RS-232C P Select AV1 input source with using the I NIN U T button on the remote control.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV3 input source using the I N P U T button on the remote control.
If connected to A V 2 Euro scart socket, select AV2 input source.
When connecting with a RCA cable
V Connect the A U D I O/V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the set.
Connect the S-VIDEO output of the VCR to the S V I D E O input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the A U D I O input jacks on the set. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV3 input source with using the I N P U T button on the remote control.
If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.
Send the TVs audio to external audio equipment via the Digital Audio Output (Optical) port.

RGB(PC

DIGITAL AUDIO OUT SETUP
Connect one end of an optical cable to the TV Digital Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment. Set the TV Speaker option - Off in the AUDIO menu. (Gp.85). See the external audio equipment instruction manual for operation.
ANTENNA IN DIGITAL AUDIO OUT COMP

1 OPTICAL

CAUTION
not look into the optical output port. Looking at the laser beam may damage your vision.

OTHER A/V SOURCE SETUP

Camcorder

Video Game Set

V Connect the A U D I O/V I D E O jacks between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red)
Select AV3 input source with using the I N P U T button on the remote control.
Operate the corresponding external equipment. Refer to external equipment operating guide.

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting with a D-sub 15 pin cable
PCMCIA CARD SLOT EJECT PCMCIA EJECT CARD SLOT IN 1 HDMI/DVI HDMI IN 2 IN 1 HDMI/DVI

AV 2 AV 1

Connect the RGB output of the PC to the R G B ( P C) jack on the set. ANTENNA Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the set. Turn on the PC and the set. Select RGB input source with using the I N P U T button on the remote control.

RS-232C IN SERVICE)

RGB OUTPUT
Connect the DVI output of the PC to the H D M I / D V I I N 1 jack on the set.
Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the set.
VIDEO RS-232C IN (CONTROL & SERVICE) 1
Turn on the PC and the set Select HDMI1 input source with using the I N P U T button on the remote control.

DVI-PC OUTPUT AUDIO

If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. If the PC does not support Auto DVI, you need to set the output resolution appropriately. To get the best picture quality, adjust the output resolution of PC graphics card's output resolution to 1024x768, 60Hz.
enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the sets screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the set; change the resolution output of PC accordingly. G There might be noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode into another resolution or change the refresh rate into another rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card. G The synchronization input waveform for Horizontal and Vertical frequencies are separate. G In Plasma TV models, we recommend using 1024x768, 60Hz for the PC mode, they provide the best picture quality. G Connect the signal cable from the monitor output port of the PC to the RGB (PC/DTV) port of the set or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the set.

Press the EXIT button to return to TV viewing.
Locking a programme (In Lock System On mode only) Select a programme to be locked with the D or E or F or G button. Press the GREEN button. The lock mark will appear in front of that programme number. Press the GREEN button again to release this function.
Note : G To watch a locked programme, input a 4-digit password in Lock system. Be sure to remember this number! , , , G If you forgot your password, press on the remote control handset. G If you select other programme after releasing a locked programme and then return to the locked programme within 1 minute, you neednt input a password to select the locked programme.
Selecting favourite programme Select your favourite programme number by pressing D or E or F or G button and then press the FAV button on your remote control handset. It will automatically include the selected programme into your favourite programme list and heart-mark will appear in front of that programme number.
5V ANTENNA POWER (IN DIGITAL MODE ONLY)
Even if there isnt a special 5V adapter power in the external antenna, this function can output 5V in the set.
Press the G button and then use D or E button to select 5V Antenna Power.
Press the G button and then use D or E button to select On or Off.
In 5V Antenna Power On, if the set is short-circuit, it will automatically return to Off.

Off On

The message Antenna feed overloaded. Automatically switched off. will appear.
SOFTWARE UPDATE (IN DIGITAL MODE ONLY)
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
Press the MENU button and then select the SETUP menu.
Press the G button and then D or E button to select Software update. Press the G button and then D or E button to select Off or On. If you select On, a user confirm message box will be displayed to notify that new software is found.
* When setting Software Update
Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen.

MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
TV D/A POWER BACK INPUT EXIT I/II MUTE MENU INFO i GUIDE
Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Manual Tuning. Press the G button to select Storage. Select the desired programme number with the F or G button or NUMBER buttons on the Storage menu.
Press the E button to select System. Select a TV system with the F or G button; L : SECAM L/L (France) BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)

Storage

1 BG V/UHF 1
System Band Channel Fine Search Name C
Press the E button to select Band. Press the F or G button to select V/UHF or Cable as required. Press the E button to select Channel. You can select the desired channel number with the F or G button or NUMBER buttons. If possible, select the channel number directly with the NUMBER buttons.
Press the E button to select Search. Press the F or G button to commence searching. If a station is found the search will stop. Press the OK button to store it. To store another station, repeat steps 3 to 8. Press the EXIT button to return to normal TV viewing.
FINE TUNING (IN ANALOGUE MODE)
Normally fine tuning is only necessary if reception is poor.
Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Manual Tuning. Press the G button and then D or E button to select Fine. Press the G button and then F or G button to fine tune for the best picture and sound. Press the OK button to store it. Press the EXIT button to return to normal TV viewing.
ASSIGNING A STATION NAME (IN ANALOGUE MODE)
You can assign a station name with five characters to each programme number.
Storage System Band Channel Fine Search Name C
Press the MENU button and then D or E button to select the SETUP menu. Press the G button and then D or E button to select Manual Tuning. Press the G button and then D or E button to select Name. Press the G button and then D or E button. You can use a the alphabet A to Z, the number 0 to 9, +/ -, and blank. Press the F or G button to select the position and make your choice of the second character, and so on. Press the OK button to store it. Press the EXIT button to return to normal TV viewing.

Switch on/off EPG

Press the GUIDE button to switch on EPG. Press the GUIDE or EXIT button again to switch off EPG and return to normal TV viewing.

Select a programme

Press the D or E, F or G, PR + or - button to select desired programme, then press the OK button to display the selected programme.
Button Function in NOW/NEXT Guide Mode
Remote Control Buttons RED YELLOW BLUE
or G or E PR + or GUIDE/EXIT TV/RADIO INFO i
Function Change EPG mode Enter Timer Record/Remind setting mode Enter Timer Record/Remind list mode Change to the selected channel Select NOW or NEXT Programme Select the Broadcasting Programme Page Up/Down Switch off EPG Select TV or RADIO Programme The detail information on or off
Button Function in 8 Days Guide Mode
Remote Control Buttons RED GREEN YELLOW BLUE
Function Change EPG mode Enter Date setting mode Enter Timer Record/Remind setting mode Enter Timer Record/Remind list mode Change to the selected channel Select NOW or NEXT Programme Select the Broadcasting Programme Page Up/Down Switch off EPG Select TV or RADIO Programme The detail information on or off
Button Function in Date Change Mode
Remote Control Buttons Function GREEN Switch off Date setting mode Change to the selected date Select a date F or G Switch off Date setting mode E GUIDE/EXIT Switch off EPG
Button Function in Extended Description Box
Remote Control Buttons D or E YELLOW INFO i GUIDE/EXIT Function Text Up/Down Enter Timer Record/Remind setting mode The detail information on or off Switch off EPG
Button Function in Record/Remind Setting Mode
- This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT terminal, using a SCART cable. Remote Control Buttons Function YELLOW Change to Guide or Timer list mode Save Timer Record/Remind Select Type, Service, Date or Start/End time F or G Function setting D or E
Button Function in Timer List Mode
Remote Control Buttons YELLOW GREEN RED BLUE D or E Function Add new Manual Timer setting mode Enter Timer list editing mode Delete the selected item Change to Guide mode Select Timer list
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats;
Spectacle (except 26/32LB7*, 42/50PC3*, P C 4 * ), F u l l, O r i g i n a l, 4 : 3, : 9, : 9 and

Z o o m 1 / 2.

BACK FAV
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. There might be uncomfortable in full mode. Then change into other mode. You can adjust the enlarge proportion using D or This function works in the following signal.

SETUPO Picture Mode PICTUREO Colour Temperature Advanced Picture Reset OPTIONO Demo SCREENO TIMEO AUDIOO
Picture Mode Colour Temperature Advanced Picture Reset Demo
Dynamic Standard Mild User 1 User 2

7 LIST 9 Q.VIEW

Auto Colour Tone Control (Warm/Medium/Cool)
To initialize values (reset to default settings), select the Cool option.
Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue.
Its available to use this function in User mode.
SETUPO Picture Mode PICTUREO Colour Temperature AUDIOO TIMEO OPTIONO SCREENO Advanced Picture Reset Demo
Press the MENU button and then D or E button to select the PICTURE menu.
Press the G button and then D or E button to select Colour Temperature.
Picture Mode Colour Temperature
Press the G button and then D or E button to select either Cool, Medium, Warm, or User.
Advanced Picture Reset Demo

Cool Medium Warm User

MANUAL PICTURE ADJUSTMENT

Picture Mode-User option

Contrast Brightness Colour Sharpness
Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels.
Press the M E N U button and then D or E button to select the PICTURE menu.
Press the G button and then D or E button to select Picture Mode.
Press the G button and then D or E button to select User 1 or User 2.
Press the G button and then D or E button to select the desired picture option (Contrast, Brightness, Colour, Sharpness and Tint).

User 1

Press the F or G button to make appropriate adjustments.
Contrast Brightness Colour Sharpness Tint
You cant adjust colour, sharpness and tint in the RGBPC mode to the levels you prefer.
Colour Tone - User option
To adjust red, green, blue to any colour temperature you prefer.
SETUPO Picture Mode PICTUREO Colour Temperature AUDIOO

TIMEO OPTIONO SCREENO

Press the G button and then D or E button to select User.
Press the G button and then D or E button to select Red, Green or Blue.

User Red Green Blue 0

Press the G button and then F or G button to select Low or High.
L o w : The reflection of the screen gets darker. H i g h : The reflection of the screen gets brighter.
Picture Mode Colour Temperature Advanced Picture Reset Demo Cinema Off Black Level

PICTURE RESET

Returns to the default settings Picture Mode, Colour Temperature, XD, Advanced at the factory.
Press the G button and then D or E button to select Picture Reset.
Press the G button to initialize the adjusted value.
IMAGE STICKING MINIMIZATION (ISM) METHOD
A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. Its not available to use this function in LCD models. White wash White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash.
Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Inversion This is the function to invert the panel colour of the screen. The panel colour is automatically inverted every 30 minutes.
Set ID 1 Factory Reset OK ISM Method
Press the MENU button and then D or E button to select the OPTION menu. Press the G button and then D or E button to select Factory Mode. Press the G button and then D or E button to select ISM Method. Press the G button and then D or E button to select either Normal, White wash, Orbiter or Inversion. If you unnecessary to set this function, set Normal. Press the EXIT button to return to normal TV viewing.

Normal Off

Low Power

LOW-POWER PICTURE MODE

This is the function to reduce the power consumption of the set. Its not available to use this function in LCD TV models.
Press the G button and then D or E button to select Factory Mode. Press the G button and then D or E button to select Low power. Press the G button and then D or E button to select Off or On. Press the EXIT button to return to normal TV viewing.
Set ID 1 Factory Reset OK ISM Method Normal Low Power

AUTO VOLUME LEVELER

AVL automatically keeps on an equal volume level even if you change programmes.

If you dont finish set up I n s t a l l a t i o n G u i d e by pressing E X I T button or time out of OSD (On Screen Display) display, it will continuously appear until completing set up whenever the set is turned on. If you select wrong local country, the teletext may not appear correctly on the screen and some problem may happen during teletext operation. CI (Common Interface) function may not be applied based on country broadcasting circumstance. DTV mode control buttons may not be working based on country broadcasting circumstance.
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
A u d i o function lets you select your preferred language for audio. If the audio data in selected language is not broadcasted, default language audio will be played. Use S u b t i t l e function when two or more subtitle languages are broadcasted. If the subtitle data in selected language is not broadcasted, default language subtitle will be displayed.
BACK EXIT MENU INFO i GUIDE MENU

UPDATE SLEEP

SUBTITLE
Press the G button and then use D or E button to select L a n g u a g e.
Press the G button and then use D or E button to select A u d i o, S u b t i t l e or S u b t i t l e H a r d o f h e a r i n g. Press the G button and then use F or G button to select your desired language.
< Audio Language Selection > G When two or more audio languages are broadcasted, you can select audio language with the I/II button on the remote control. G Press the D or E button to select an audio language. G Press the F or G button to select L+R, L+L or R+R. < Subtitle Language Selection > G When two or more subtitle languages are broadcasted, you can select subtitle language with the SUBTITLE button on the remote control. G Press the D or E button to select a subtitle language.
Audio Language OSD Information Display N.A Status Not Available MPEG Audio Dolby Digital Audio Audio for Visual Impaired Audio for Hearing Impaired
Subtitle Language OSD Information Display N.A
Status Not Available Teletext Subtitle Subtitle for Hard of Hearing
- The audio/subtitle can be displayed simpler form with 1 to 3 characters which is broadcast by service provider. - When you select supplementary Audio (Audio for Visual/Hearing Impaired) it may speak out a part of Main audio.

CLOCK SETUP

The clock is set automatically when receiving the digital signal. (You can set the clock if the TV has no DTV signal.) You must set to the time correctly before using on/off time function.
Press the MENU button and then select the TIME menu.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for a long time (such as a vacation), its a good idea to unplug the power cord to protect against possible damage from lightning or power surges.

PRODUCT SPECIFICATIONS

26LC4* MODELS 26LC45-ZA 26LC46-ZC
676.4 x 529.2x 221.0 mm 26.6 x 20.8 x 8.7 inches 676.4 x 474.5 x 85.0 mm 26.6 x 18.7 x 3.3 inches 10.04kg / 22.1 lbs 9.04kg / 19.9 lbs AC100-240V~ 50/60Hz 1.3A 130W
32LC4* 32LC45-ZA 32LC46-ZC
806.8 x 605.6 x 249.0 mm 31.8 x 23.9 x 9.8 inches 806.8 x 548.6 x 79.0 mm 31.8 x 21.6x 3.1 inches 13.8 kg / 30.5 lbs 10.7 kg / 23.6 lbs
37LC4* 37LC45-ZA 37LC46-ZC
926.6 x 697 280.4mm.6x 36.5x 27 x 1 inches.5 1.0 926.6 x 635.6 x 88.0mm 36.5x 25.0 x 3.5 inches 20.0 kg / 44.1 lbs 16.3 kg / 35.9 lbs
42LC4* 42LC45-ZA 42LC46-ZC
1032.7 x 750.0 x 287 mm.6 40.7x 29.5 x 1 inches 1.3 1032.7 x 685.5 x 88.5 mm 40.7 x 27 x 3.5 inches.0 24.5 kg / 54.0 lbs 20 kg / 44.1 lbs

Dimensions

(Width x Height x Depth)

with stand without stand

Weight
Power requirement Power Consumption MODELS
AC100-240V~ 50/60Hz 1.5A AC100-240V~ 50/60Hz 1.8A AC100-240V~ 50/60Hz 2.3A 1 80W 230W 150W

26LC5* 26LC55-ZA

676.4 x 529.2x 221.0 mm 26.7 x 20.9 x 8.7 inches 676.4 x 478.7 x 84.0 mm 26.7 x 18.9 x 3.3 inches 10.04kg / 22.2 lbs 8.62kg / 19.0 lbs
32LC5* 32LC55-ZA 32LC56-ZC
806.6 x 606.5 x 249.0 mm 31.8 x 23.9 x 9.8 inches 806.6 x 552.3 x 79 mm 31.8 x 21.8x 3.1 inches 14.1kg / 31.1 lbs 1 1.2kg / 24.7 lbs

37LC5* 37LC55-ZA

927 x 692.8x 280.5mm.0 36.5x 27 x 1 inches.3 1.x 630.0 x 88.0mm.0 36.5x 24.8 x 3.5 inches 20.0 kg / 44.1 lbs 16.0 kg / 35.3 lbs

42LC5* 42LC55-ZA

1033.1 x 749.5 x 287 mm.6 40.7x 29.5 x 1 inches 1.3 1033.4 x 686.8 x 88.5mm 40.7 x 27 3.5inches.0x 24.5 kg / 54.1 lbs 20.4 kg / 45.0 lbs AC100-240V~ 50/60Hz 2.3A 230W
with stand without stand with stand without stand
Power requirement Power Consumption Television System Program Coverage External Antenna Impedance Operating Temperature Environment condition Operating Humidity Storage Temperature Storage Humidity
AC100-240V~ 50/60Hz 1.3A AC100-240V~ 50/60Hz 1.5A AC100-240V~ 50/60Hz 1.8A 130W 150W 1 80W
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S0 ~ 40C / 32 ~ 104F Less than 80% -20 ~ 60C / -4 ~ 140F Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
26LB7* MODELS 26LB75-ZE 26LB76-ZF
671.8x539.8x254.2 mm 26.4x21.2x10 inches 671.8x476.1x85 mm 26.4x18.7x3.3 inches 14 kg / 30.9 lbs 1 kg / 24.3 lbs 1 AC100-240V~ 50/60Hz 1.3A 130W