Press the P L A Y button on the VCR and match the appropriate programme between the TV and VCR for viewing.
Connecting with a Euro Scart
Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the TV.

GB(PC) AUDIO (RGB/DVI)

Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.)
Select AV1 input source using the I N P U T button on the remote control. If connected to A V 2 Euro scart socket, select AV2 input source.

ENT IN

Any Euro Scart cable used must be signal shielded.
Connecting with an RCA cable
V Connect the A U D I O/V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV3 input source using the I N P U T button on the remote control.

OUTPUT SWITCH ANT OUT

If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the TV.
Connect the S-VIDEO output of the VCR to the S V I D E O input on the TV. The picture quality is improved; compared to normal composite (RCA cable) input.
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV3 input source using the I N P U T button on the remote control.
If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.

DIGITAL AUDIO OUT SETUP

Connect one end of an optical cable to the TV Digital EJECT Audio (Optical) Output port. Connect the other end of the optical cable to the digital audio (optical) input on the audio equipment.
Sending the TVs audio signal to external audio equipment via the Digital Audio Output (Optical) port.
Connect the audio outputs of the VCR to the A U D I O input jacks on the TV.

RS-232C IN RVICE)

Set the TV Speaker option - Off in the AUDIO menu. (Gp.88). Refer to the external audio equipment instruction manual for operation.

CAUTION

not look into the optical output port. Looking at the laser beam may damage your vision.

OTHER A/V SOURCE SETUP

Camcorder

Video Game Set

V Connect the A U D I O/V I D E O jacks between TV and external equipment. Match the jack colours. (Video = yellow, Audio Left = white, and Audio Right = red)
Select AV3 input source using the I N P U T button on the remote control.
Operate the corresponding external equipment. Refer to external equipment operating guide.

PC SETUP

G Connect

the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). G If using a sound card, adjust PC sound as required. G This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV. G DDC protocol is preset for RGB (Analogue RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionality. G If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV. G If the graphic card on the PC does output analogue and digital RGB simultaneously, switch the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.) G DOS mode may not work depending on the video card if you use a HDMI to DVI cable. G If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.
Supported Display Resolution

RGB[PC] / HDMI[PC] mode

Resolution 720x400 640x480 800x600 832x624 1024x768

1280x768

HDMI[DTV] mode
Resolution 640x480 720x480 720x576 1280x720 Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.469 31.469 31.47 31.50 31.25 37.50 44.96 45.00 33.72 33.75 28.125 27.00 56.25 67.433 67.500 59.94 60.00 59.94 60.00 50.00 50.00 59.94 60.00 59.94 60.00 50.00 24.00 50.00 59.94 60.00
Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.468 31.469 37.684 37.879 46.875 49.725 48.363 56.476 60.123 47.78 47.72 47.56 66.647 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.029 59.87 59.8 59.6 59.988
1360x768 1366x768 1920x1080

1920x1080

Screen Setup for PC mode
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not correct, your TV is functioning properly but needs further adjustment.

MENU GUIDE

Auto configure This function is for automatic adjustment of the screen position, clock, and phase. The displayed image will be unstable for a few seconds while the auto configuration is in progress.
Press the M E N U button and then use D or E button to select the SCREEN menu. Press the G button and then use select Auto Config.
SETUPO Auto Config. PICTUREO Manual Config. AUDIOO XGA Mode Aspect Ratio TIMEO Reset OPTIONO SCREEN

button to

D V RO
Press the G button to start Auto Config. When Auto Config. has finished, OK will be shown on screen. If the position of the image is still not correct, try Auto adjustment again. If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Manual Config.

AUTO PROGRAMME TUNING (IN DIGITAL MODE)
Use this to automatically find and store all available programmes. When you start auto programming in digital mode, all previously stored service information will be deleted.
It is not possible to use this function while recording a programme.
Press the MENU button and then D or E button to select the SETUP menu.
Press the G button and then D or E button to select Auto Tuning.
SETUPG Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit 5V Antenna Power TIMEO Booster OPTIONO Software Update SCREENO Diagnostics D V RO CI Information
Press the G button to begin auto tuning. Use NUMBER buttons to input a 4-digit password in Lock System On. The message All service-information will be updated. Continue? will appear.
Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Booster Software Update Diagnostics CI Information
If you want to keep on auto tuning select YES with using the F or G button. Then, press the OK button. Otherwise select NO.
Auto Tuning Programme(s) Programme(s) %

MENU Stop

To stop auto tuning, press the MENU button.

UHF CH.

MANUAL PROGRAMME TUNING (IN DIGITAL MODE)
Manual Tuning lets you manually add a programme to your programme list.
Press the G button and then D or E button to select Manual Tuning.
Press the G button and then D or E button or NUMBER buttons to select the desired channel number. Use NUMBER buttons to input a 4-digit password in Lock System On.
Your receiver will add this channel to your channel list. UHF CH. 35
Press the OK button to save.
When the channel number you want to add is already in the programme list, the message Setup information for the channel will be updated. Continue? will appear.
Auto Tuning Manual Tuning Programme Edit 5V Antenna Power Booster Software Update Diagnostics CI Information Your receiver will add this channel to your channel list. UHF CH
If you wish to continue manual tuning, select YES using the F or G button.
Then, press the OK button. Otherwise select NO.

Search

PROGRAMME EDIT (IN DIGITAL MODE)
When a programme number is skipped, it means that you will be unable to select it using PR + or - button during TV viewing. If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes.

The extra recording time added to the existing setting equals the final recording time.
Recording Options Cricket World Cup 23:40~00:40 23:57
After adjusting the recording time, select O K. The Status bar will be displayed.

Total recording duration

Recording time 23:54~01:55 (2 min recorded)

Set duration

No change

Cancel 3

0:00:00 / 2:00:00

Elapsed recording time

Press the E X I T button to hide the Status bar. Press the O K button to display the Status bar.
Recording stops when the selected duration is reached or when you press the A button. Although recording has stopped, the TimeShift Mode feature remains active.
When recording, if the available storage space is not sufficient, the recording will automatically Stop. In Radio mode, recordings of less than 30 seconds will not be saved. In other modes, recordings of less than 10 seconds will not be saved. No data will be saved on paid channels with no CI Card or expired period of validity of CI Card, in invalid services and in data only channels (ex. MHEG) In order to save disk space. The recording function will not initiate for a copy-protected programme. The displayed time differs slightly from the actual time. When there is no signal or a film source is being viewed, the displayed time may differ slightly from the actual time. Recording is not possible with copy-protected programmes. When Instant Recording, this message is displayed.
Cannot record due to copy protection.
When Manual Recording, this message is displayed.
Schedule recording cannot start. Copy protected.
Recording is based on the currently being viewed source. The Auto AV source is recorded while viewing the SCART Auto AV, but the Analog TV source is recorded while viewing the Analog TV source. When reserved recording is performed, even if the channel is set to the Analog TV, if the Scart Auto AV operates, the Auto AV source is recorded. When the programme switch key is pressed while recording the Analog TV source, the channel is switched to the Digital TV source. However, when the numeric key is pressed, it is not switched. The maximum schedule recording duration is 12 hours. The maximum number of schedule recording is 60 in the UK and 30 in the rest of the world. When Manual Recording, the default sound settings apply. When the recording time conflicts with that of existing recordings, the Collision message is displayed in a Popup window in the UK and recording is not registered in the rest of the world. When recording a DTV source, you cannot watch Scrambled channels (paid channel). When you choose an scrambled channel (paid channel), the following message is displayed.
Cannot watch a scrambled programme. while recording another DTV programme.
When you change channels while recording an Analog TV source, the channel will be switched to the DTV mode.

Manual Record TV Menu 1

Button Function in Schedule List Mode
Remote Control Buttons Function D or E Select programmes Up/down. Display Popup window EXIT OSD disappears. YELLOW Enter Manual record mode. BLUE Change to Guide mode. Page Up/Down PR D or E In UK, this function is available for use in the Overall Schedule mode. Popup Menu Modify Delete Delete All Cancel Function Modify to the Schedule Recording. Delete Schedule Recording. Delete All Schedule Recording. Delete Popup window.
Schedule List This is BBC THREE DTV 7 BBC THREE Sun Apr 01 16:48~17:18 (30min) Title No title This is BBC THREE

TV DTV

Mon Mar 26 15:47 Page 1/1 Programme 1 C 01 Date Start Repeat Once Weekly

Wed Mar 28 15:18

7 BBC THREE Sun Apr 01 16:48

Move Page

Popup Menu Manual Record

Exit Guide

Modify Delete

Delete All Cancel

The contents below are only applicable when country selected is the UK. Remote Control Buttons Function RED Select Overall Schedule/Weekly Schedule in turn. INFO i Detail information on or off.
Schedule List Catch me if you can 027 Discovery Channel Wed Oct 17 Series Record Overall Schedule The Lord of the Rings Catch me if you can TV 11 DiscoveryRTime TV 1BBC (Weekdays) Ally Mcbeal (Weekends) DTV 4 Bloomberg (Weekly) Royal Ceremony
Sat. Oct 30 19:10 18:20 - 21:20 Page 1/1

Recommended

Tue. Feb 13 Tue. Feb 13 Wed. Feb 14 Wed. Feb 14 Thu. Feb 15 Fri. Feb 16 Fri. Feb 16
13:00 15:12 5:34 6:00 7:35 15:21 22:00

Popup Menu Guide

Move Page Weekly Schedule
Information Manual Record

RECORD QUALITY

This function is not available while a recording is taking place. (Only for analogue schedule recording)
Press the M E N U button and then use D / E button to select the D V R menu. Press the G button and then use D / E button to select Record Quality. Press the G button and then use D / E button to select H i g h or Normal. Press the EXIT button to return to normal TV viewing.

High Normal

Only for analogue schedule recording (TV, AV1, AV2, AV3).

FORMAT HARD DISK

Erases all programmes and initialises the hard drive.

Press the M E N U button and then use D / E button to select the D V R menu. Press the G button and then use D / E button to select HDD Format. Press the G button to start HDD Format. if you press the G button, this message is displayed.
Do you want to format HDD?

Yes No

To set
if you select Yes, this message is displayed.
HDD format in progress. 2 3
When completing, this message is displayed.
HDD initialisation successful.
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services. In addition, detailed information about the programme is often available in the EPG (the availability and amount of these programme details will vary, depending on the particular broadcaster). This function can be used only when the EPG information is broadcast by broadcasting companies. The EPG displays the programme details for next 8 days.

Switch on/off EPG

Press the GUIDE button to switch on EPG. Press the GUIDE or EXIT button again to switch off EPG and return to normal TV viewing.

Select a programme

Programme Guide 1 BBC ONE 08:Mar 08:Mar 08:30 Breakfast Cramp. Chuck. To. 09:00 Don.
EPG (ELECTRONIC PROGRAMME GUIDE)
Press the D or E, F or G, PR + or - button to select the desired programme, then the OK button, the popup window to select the function is displayed.
DTV 80 BBC ONE BBC TWO BBC THREE CBBC Channel BBC NEWS 24

Number ja. Nina a. Lu.

This is BBC THREE Dogstar Breakfast Young Dracula Class TV:. CI. BBC News BBCi BBC News

105 BBCi

TV/RADIO

Radio Date

Record Manual Record

Information

Button Function in NOW/NEXT Guide Mode
Remote Control Buttons RED YELLOW BLUE
or G D or E PR + or GUIDE/EXIT TV/RADIO INFO i RECORD FAV
Function Change EPG mode Enter Manual Record setting mode Enter Schedule list mode Display Popup window Select NOW or NEXT Programme Select the Broadcast Programme Page Up/Down Switch off EPG Select TV or RADIO Programme Detail information on or off. Select Record/delete the highlighted programme in turn. Select the Favourite programme/all Programmes in turn.
Programme Guide 1 BBC ONE DTV 80 BBC ONE BBC TWO BBC THREE CBBC Channel BBC NEWS 24 NOW Breakfast ChuckleVision This is BBC THREE Dogstar Breakfast BBCi 08:Mar NEXT Dont Get Done Get Dom Tommy Zoom This is BBC THREE Young Dracula BBC News BBCi

X D C o n t r a s t : Optimises the contrast automatically according to the brightness of the reflection. A X D C o l o u r : Adjusts the colour of the reflection automatically to reproduce as close as possible natural colours. A X D N R : Removes interference up to the point where it does not damage the original picture. A M P E G N R : Reduces interference which may appear on the screen while watching TV.
Use it to see the difference between XD Demo on and XD Demo off.
It is not possible to use this function in RGB[PC],HDMI[PC] mode.
Press the MENU button and then D or E button to select XD Demo.
Press the G button to begin XD Demo.
To stop X D D e m o, press the M E N U or E X I T button.

To Start

XD Demo

XD Off XD On

Menu Exit

ADVANCED - CINEMA

To set the TV up for the best picture quality for viewing films.
This feature operates only in TV, AV, S-Video and Component 480i/576i mode.
It is not possible to use this function while playing a recorded programme.
Press the G button and then D or E button to select Advanced.
Press the G button and then D or E button to select Cinema.
Cinema Off Black Level Low
Press the G button and then F or G button to select On or Off.
Picture Mode Colour Temperature Advanced Picture Reset Demo Cinema

F G On

Black Level Low
ADVANCED - BLACK(DARKNESS) LEVEL
When you view a film this function adjusts the TV to best picture quality. Adjusting the contrast and the brightness of the screen using the black level of the screen. This function works in the following mode: AV (NTSC-M), SVideo (NTSC-M) or HDMI.
It is not possible to use this function while playing a recorded programme Press the M E N U button and then D or E button to select the PICTURE menu.
PICTURE SETUPO Picture Mode G Colour Temperature TIMEO
Press the G button and then D or E button to select Black Level.
Press the G button and then F or G button to select Low or High.
L o w : The black level of the screen gets darker. H i g h : The black level of the screen gets brighter.
Picture Mode Colour Temperature Advanced Picture Reset Demo Cinema Off Black Level

PICTURE RESET

Returns to the default factory setting for Picture Mode, Colour, Temperature, XD and Advanced.
Press the G button and then D or E button to select Picture Reset.

Press the G button to initialise the adjusted value.
IMAGE STICKING MINIMIZATION (ISM) METHOD
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. It is not possible to use this function with LCD models. White wash White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Inversion This function inverts the panel colour of the screen. The panel colour is automatically inverted every 30 minutes.
Set ID 1 Factory Reset OK ISM Method
Press the MENU button and then D or E button to select the OPTION menu. Press the G button and then D or E button to select Factory Mode. Press the G button and then D or E button to select ISM Method. Press the G button and then D or E button to select either Normal, Orbiter, White wash or Inversion. If you do not need this function, set Normal. Press the EXIT button to return to normal TV viewing.

Normal Off

Low Power

LOW-POWER PICTURE MODE

This function allows you to reduce the power consumption of the TV. It is not possible to use this function with LCD models.
Press the G button and then D or E button to select Factory Mode. Press the G button and then D or E button to select Low power. Press the G button and then F or G button to select Off or On. Press the EXIT button to return to normal TV viewing.
Set ID 1 Factory Reset OK ISM Method Normal Low Power
SOUND & LANGUAGE CONTROL

AUTO VOLUME LEVELER

EXIT BACK DVR MENU GUIDE
AVL automatically remains on the same level of volume if you change programmes.
Press the MENU button and then select the AUDIO menu.
SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO Digital Audio Out OPTIONO SCREENO D V RO
Press the G button and then D or E button to select Auto Volume. Press the G button and then D or E button to select Off or On. Press the EXIT button to return to normal TV viewing.
Sound Mode Auto Volume Balance TV Speaker Digital Audio Out
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Surround MAX, Standard, Music, Movie or Sports and you can also adjust the frequency of the equalizer. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. S u r r o u n d M A X , S t a n d a r d , M u s i c , M o v i e , and S p o r t s are preset for optimum sound quality at the factory and are not adjustable. S u r r o u n d M A X Select this option for the most realistic sound. S t a n d a r d Commanding and natural audio. Music Select this option to enjoy the original sound when listening to music. Movie Select this option to enjoy sublime sound. Sports Select this option to watch sports broadcasting. User Select this option for user-defined audio settings.

Surround MAX Standard Music Movie Sports User
Press the M E N U button and then D or the AUDIO menu.

button to select

Press the G button and then D or Sound Mode.
Press the G button and then D or E button to select Surround MAX, Standard, Music, Movie, Sports or User.
SOUND SETTING ADJUSTMENT -USER MODE
Adjusting the audio equalizer.
Press the G button and then D or

button to select User.

Press the G button.
Select a frequency band by pressing the F or G button. Set the desired sound level with the D or E button.
User 120Hz 200Hz 500Hz 1.2KHz 3KHz 7.5KHz 12KHz

BALANCE

You can adjust the sound balance of the speakers to preferred levels.
Press the MENU button and then select the AUDIO menu. Press the G button and then Balance. Press the G button and then desired adjustment.

button to make

TV SPEAKERS ON/ OFF SETUP
You can adjust the internal speaker status. In A V 1 , A V 2 , A V 3 , C O M P O N E N T , R G B and H D M I with H D M I to D V I cable, the TV speaker can be operational even when there is no video signal.
If you wish to use an external hi-fi system, turn off the TV internal speakers.
Press the G button and then D or E button to select TV Speaker. Press the G button and then D or E button to select Off or On. Press the EXIT button to return to normal TV viewing.
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output. The TV can only output Dolby Digital if a channel is broadcast with Dolby Digital Audio. When Dolby digital is available, selecting Dolby Digital in the Digital Audio Out menu will set SPDIF output to Dolby Digital. If Dolby Digital is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM. Even if both Dolby Digital and Audio language have been set in a channel which broadcast Dolby Digital Audio, only Dolby Digital will be played. This function is not displayed in the Analogue mode. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Press the MENU button and then D or E button to select the AUDIO menu. Press the G button and then D or E button to select Digital Audio Out. Press the G button and then D or E button to select Dolby Digital or PCM.

Dolby Digital PCM

Stereo/Dual Reception (In Analogue Mode Only)
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast Mono Stereo Dual

On Screen Display

MONO STEREO DUAL I
Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice. In mono reception, the clarity of sound is improved. To switch back to stereo, press the I/I I button twice. Language selection for dual language broadcast If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I / I I button repeatedly.

DUAL I DUAL II DUAL I+II

Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker.
NICAM Reception (In Analogue Mode Only)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received by pressing the I/II button repeatedly.
When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O.
When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O. If the stereo signal is weak, switch to F M m o n o.
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or N I C A M D U A L I + I I or M O N O.
Speaker Sound Output Selection
In AV, S-Video, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Repeatedly press the I / I I button to select the sound output.
L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio R input is sent to the right loud speaker. L+L: Audio signal from audio L input is sent to left and right loud speakers. R+R: Audio signal from audio R input is sent to left and right loud speakers.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
Press the D or E or F or G button and then, O K button to select your desired language. Press the D or E button and then, O K button to select your country.

* If you want to change Language/ Country selection
Press the G button and then use D or E button to select Language. The menus can be shown on the screen in the selected language. Or, Press the G button and then use D or E button to select Country. Press the G button and then use F or G button to select your desired language or country. Press the O K button.

UPDATE

SLEEP SUBTITLE
If you do not finish the set-up I n s t a l l a t i o n G u i d e by pressing E X I T or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on. If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. The CI (Common Interface) function may not be applied based on country broadcasting circumstances. DTV mode control buttons may not function based on country broadcasting circumstances.
LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The A u d i o function allows selection of a preferred language. If audio data in a selected language is not broadcast, the default language audio will be played.
Use the S u b t i t l e function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
Press the G button and then use D or E button to select L a n g u a g e. Press the G button and then use D or E button to select A u d i o, S u b t i t l e or S u b t i t l e H a r d o f h e a r i n g. Press the G button and then use F or G button to select your desired language.
< Audio Language Selection > G When two or more audio languages are broadcast, you can select the audio language with the I/II button on the remote control. G Press the D or E button to select an audio language. G Press the F or G button to select L+R, L+L or R+R. < Subtitle Language Selection > G When two or more subtitle languages are broadcast, you can select the subtitle language with the SUBTITLE button on the remote control. G Press the D or E button to select a subtitle language.
Audio Language OSD Information Display N.A Status Not Available MPEG Audio Dolby Digital Audio Audio for Visual Impaired Audio for Hearing Impaired

Direct page selection

As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode.

FASTEXT

The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.

A Page selection

Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with corresponding coloured buttons. AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The PR+ or - button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS

A REVEAL

Press this button to display concealed information, such as solutions to riddles or puzzles. Press this button again to remove the information from the display.

A UPDATE

Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Press this button again to view the updated teletext page.

A TIME

When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, PR+ or - or NUMBER buttons. Press again to exit this function.

A HOLD

Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive. To continue press this button again.

DIGITAL TELETEXT

*This function works in UK only.
The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc. This digital teletext can access special digital teletext services and specific services which broadcast digital teletext. You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button. If the digital teletext service or the digital teletext only service is on, then Trick Play is not supported. The immediate recording feature is not supported in the digital teletext only service. Digital teletext service is not supported in the delayed mode.

Cleaning the Screen

A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it to wipe the screen. Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.

Cleaning the Cabinet

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Do not to use a wet cloth.

Extended Absence

If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to protect against possible damage from lightning or power surges.

PRODUCT SPECIFICATIONS

MODELS 32LT7* 32LT75-ZA Dimensions

(Width x Height x Depth)

37LT7* 37LT75-ZA
934.3 x 675.9 x 285.6 mm 36.8 x 26.6 x 1 inches 1.3 934.3 x 628.5 x 88.5 mm 36.8 x 24.8 x 3.5 inches 19.8 kg / 43.7 lbs 1 kg / 36.0 lbs 6.3 AC100-240V~ 50/60Hz 2.0A 200W

42LT7* 42LT75-ZA

1038.1 x 750.6 x 335.7 mm 40.9x 29.6 x 1 inches 3.2 1038.1 x 687 x 88.5 mm.9 40.9 x 27 x 3.5 inches.1 24.2 kg / 53.4 lbs 21.1 kg / 46.5 lbs AC100-240V~ 50/60Hz 2.4A 240W

with stand without stand

806.4 x 598.9 x 273.9 mm 31.8 x 23.6 x 10.8 inches 806.4 x 542.4 x 79.0 mm 31.8 x 21.4 x 3.1 inches 1 kg / 29.3 lbs 3.kg / 25.6 lbs 1.6 AC100-240V~ 50/60Hz 1.7A 1 70W

Weight

Power Requirement Power Consumption MODELS

42PT8* 42PT85-ZB

1 130.0 x 768.1 x 310.4 mm 44.5 x 30.3 x 12.3 inches 1 130.0 x 715.0 x 85.0 mm 44.5 x 28.2 x 3.4 inches 31.1 kg / 68.6 lbs 27 kg / 61.1 lbs.7 AC100-240V~ 50/60Hz 3.5A 330W

50PT8* 50PT85-ZB

1308.0 x 906.1 x 370.0 mm 51.5 x 35.7 x 14.6 inches 1308.0 x 845.0 x 89.5 mm 51.5 x 33.3 x 3.5 inches 42.4 kg / 93.5 lbs 37 kg / 83.1 lbs.7 AC100-240V~ 50/60Hz 4.5A 450W

Dimensions

with stand without stand with stand without stand
Power Requirement Power Consumption Television System Programme Coverage External Antenna Impedance Operating Temperature Environmental conditions Operating Humidity Storage Temperature Storage Humidity
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S0 ~ 40C / 32 ~ 104F Less than 80% -20 ~ 60C / -4 ~ 140F Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
PROGRAMMING THE REMOTE CONTROL
The remote control is a multi brand or universal remote. It can be programmed. to operate most remote controlled devices from other manufacturers. Note that the remote control may not control all models from other brands.
Programming a code into a remote mode
Testing your remote control. To find out whether your remote control can operate other components without programming, turn on a component such as a VCR and press the corresponding mode button (such as a D V D or V C R) on the remote control, while pointing at the component. Test the P O W E R and P R + / - buttons to see if the component responds correctly. If the component does not operate correctly, the remote control requires programming to operate the device. Switch on the component to be programmed, then press the corresponding mode button (such as D V D or V C R) on the remote control. The remote control button of the desired device is illumintated. Press the M E N U and M U T E buttons simultaneously, the remote control is ready to be programmed with the code. Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off. Press the M E N U button to store the code. Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.

APPENDIX

Troubleshooting...103 Maintenance...105 Product Specifications...106 Programming the Remote Control..107 IR Codes..External Control Device Setup..1 12

PREPARATION

HOME MENU
This menu is a contents guide. In Home Menu, you enter the Recorded list of DVR, Manual Recording of the DVR, Schedule List ,Photo List, Music List, Movie List or TV Menu.

INPUT TV INPUT

MODE TV DVD

Free Space

HIGH NORMAL
BRIGHT RATIO SIMPLINK VCR

PIP PR- PIP PR+

SWAP PIP INPUT

Recorded TV

LIST MENU

G p.46

LIVE TV EXIT
Manual Record Schedule List

TIME SHIFT

Photo List Music List

7 G p. 6 2~7 0

FAV/ MARK

Movie List TV Menu

FRONT PANEL CONTROLS
This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth.

Remote Control Sensor

Power/Standby Indicator illuminates red in standby mode. illuminates green when the set is switched on. illuminates orange when the set is switched off during recording.

INPUT MENU OK VOL PR

INPUT MENU OK

POWER Button

INPUT Button

MENU Button

OK Button

VOLUME Buttons

PROGRAMME Buttons

BACK PANEL INFORMATION

This is a simplified representation of the back panel. Here shown may be somewhat different from your TV.

AV IN 3 V

AV IN 3

VIDEO L/MONO AUDIO R

S-VIDEO
Audio/Video Input Connect audio/video output from an external device to these jacks.
RGB IN HDMI/DVI IN 1 HDMI IN 2

HDMI/DVI IN 1

HDMI IN RGB IN 2

RGB IN

AUDIO (RGB/DVI)

ANTENNA IN

HDMI/DVI IN

HDMI IN 2

AV 1 (PC) AV 2
RS-232C IN (CONTROL&SERVICE)
VARIABLE AUDIO OUT VARIABLE AUDIO OUT

COMPONENT IN

VARIABLE AUDIO OUT ARIABLE AUDIO
RS-232C IN (CONTROL&SERVICE) (CONTROL&SERVICE)

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
When connecting with a D-sub 15 pin cable
RGB RGB IN IN HDMI/DVI IN 1 HDMI IN 2

RGB OUTPUT

Connect the RGB output of the PC to the R G B ( P C) jack on the set.
Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the set. 1
Turn on the PC and the set.
Select RGB input source with using the I N P U T button on the remote control.

RGB (PC)

DVI-PC OUTPUT
Connect the DVI output of the PC to the H D M I / D V I I N 1 jack on the set.
Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the set.
If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. If the PC does not support Auto DVI, you need to set the output resolution appropriately.
Supported Display Resolution (RGB /HDMI[PC]mode) Resolution 720x400 640x480 800x600 1024x768 Horizontal Frequency(kHz) 31.469 31.469 37.500 37.879 46.875 48.363 56.476 60.023 47.693 47.700 47.700 Vertical Frequency(Hz) 70.08 59.94 75.00 60.31 75.00 60.00 70.06 75.02 59.99 60.00 60.00
1280x768 1360x768 1366x768
enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the sets screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the set; change the resolution output of PC accordingly. G There might be noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode into another resolution or change the refresh rate into another rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card. G The synchronization input waveform for Horizontal and Vertical frequencies are separate.

We recommend using 1024x768, 60Hz (42 inch PLASMA TV models)/ 1360x768, 60Hz (50 inch PLASMA TV models) for the PC mode, they provide the best picture quality.
the signal cable from the monitor output port of the PC to the RGB (PC/DTV) port of the set or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port

G Connect

on the set. the audio cable from the PC to the Audio input on the set. (Audio cables are not included with the set). G If using a sound card, adjust PC sound as required. G This set uses a VESA Plug and Play Solution. The set provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this set. G DDC protocol is preset for RGB (Analog RGB) and HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionally. G If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC on the set. G If graphic card on the PC does output analog and digital RGB simultaneously, set the set to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the set.) G DOS mode may not work depending on video card if you use a HDMI to DVI cable. G When you use too long RGB-PC cable, there might be a noise on the screen. We recommend using under 5m of the cable. It provides the best picture quality.

Screen Setup for PC mode

Auto Configure (RGB mode only)
Automatically adjusts picture position and minimizes image shaking.After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment.
Auto configure This function is for the automatic adjustment of the screen position, clock, and phase. The displayed image will unstable for a few seconds while the auto configuration is in progress.

PICTURE AUDIOO TIMEO

SETUPO Picture Mode G Colour Temperature
Press the M E N U button and then use D / select the PICTURE menu.

button to

Advanced Aspect Ratio OPTIONO Picture Reset DVRO Screen Demo
Press the G button and then use D / E button to select Screen.
Picture Mode Colour Temperature
Press the G button and then use D / E button to select Auto Config.

Advanced Aspect Ratio Picture Reset Screen Demo

To Set

Press the G button to start Auto Config. When A u t o c o n f i g. has finished, OK will be shown on screen. If the position of the image is still not correct, try Auto adjustment again.
Screen Auto Config. Manual Config. XGA Mode Reset
If picture needs to be adjusted more after Auto adjustment in RGB, you can adjust the Manual Config.
Press the E X I T button to return to TV viewing.
Adjustment for screen Phase, Clock, Position
If the picture isnt clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. To correct the screen size, adjust C l o c k. This function works in the following mode : RGB, COMPONENT (480p/576p/720p/1080i/1080p), HDMI (480p/576p/720p/1080i/1080p). Its not available to use Phase, Clock function in COMPONENT (480p/576p/720p/1080i/1080p), HDMI (480p/576p/720p/1080i/1080p). C l o c k This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. P h a s e This function allows you to remove any horizontal noise and clear or sharpen the image of characters.

Menu Prev.

PICTURE
SETUPO Picture Mode G Colour Temperature TIMEO

AUDIOO

Press the M E N U button and then use D / select the PICTURE menu. Press the G button and then use D / Screen. Press the G button and then use D / Manual Config.
Picture Mode Colour Temperature Advanced Aspect Ratio Picture Reset Screen Demo

button to select

Screen Auto Config. Manual Config. XGA Mode Reset Phase Clock H-Position V-Position
Press the G button and then use D / E button to select Phase, Clock, H-Position or V-Position. Press the F /
button to make appropriate adjustments.

Selecting Wide XGA mode

To see a normal picture, match the resolution of RGB mode and selection of XGA mode. This function works in the following mode: RGB mode.

Programme Edit

4 C C C S S S 16 S 17 C 04 BLN 2 S 22

Delete Move Menu Prev.

Copy Skip

FAVOURITE PROGRAMME

This function lets you select your favourite programmes directly. Repeatedly press the F A V button to select stored favourite programmes.
Press the M E N U button and then D / SETUP menu.

button to select the

Press the G button and then D / E button to select Favourite Prog.

Press the D /

E button to select - -

- - - - -.

Select a desired programme with the F / G button or NUMBER buttons. Any number under 10 is entered with a numeric 0 0in front of it, i.e.for 5. To store another programme, repeat steps 4 to 5. You can store up to 8 programmes.
---------------------------------

--------

CALLING THE PROGRAMME TABLE
You can check the programmes stored in the memory by displaying the programme Table.

LIST MENU LIVE TV EXIT

Displaying programme Table Press the L I S T button to display the Programme Table menu. The programme list appears on the screen. One programme list contains ten programmes as shown.

SIZE POSITION INDEX

a. You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode.

Programme List

4 ----C 01 C 04 C 05 BLN S S C S S 28
b. Some programmes with the channel number shown in the pro gramme list indicate there is no station name assigned.

ED FEG EE

Selecting a programme in the programme Table Select a programme with the D / E / F / G button. Then press the O K button. The set switches to the chosen programme number.
Paging through a programme Table There are 10 programme list pages in which contain 100 pro grammes. Pressing the D / E / F / G button repeatedly turns the pages.
Press the L I S T button to return to normal TV viewing.

INPUT SOURCE SELECTION

Sets a label to each input source which is not in use.
Press the M E N U button and then use D / to select the OPTION menu.

SIMPLINK Menu

Press the D / E /
/ G button and then OK button to select the desired SIMPLINK source.
T V v i e w i n g : Switch to the previous TV programme regardless of the current mode. D I S C p l a y b a c k : Select and play discs. When multiple discs are available, the titles of the discs are conveniently displayed at the bottom of the screen. V C R p l a y b a c k : Play and control the connected VCR.

Selected Device

2 G When
H D D R e c o r d i n g s p l a y b a c k : Play and control recordings stored in HDD. Audio Out to Home theater/Audio Out to TV : Select Home theater or TV speaker for Audio Out.
no device is connected (displayed in gray) a device is connected (displayed in bright colour)

G When

Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the SIMPLINK device with the HDMI cable. G After connecting the HDMI terminal for the home theater with SIMPLINK function in the above method, connect the VARIABLE AUDIO OUT terminal on the back of the TV to the VARIABLE AUDIO IN terminal on the back of the SIMPLINK device with the VARIABLE AUDIO OUT cable. G When operating the external device with SIMPLINK, press the TV button among the MODE button on the remote controller. G When you switch the Input source with the INPUT button on the remote controller, you can stop the operation of device controlled by SIMPLINK. G When you select or operate the media device with home theater function, the speaker automatically switches to home theater speaker (HT speaker). G If the SIMPLINK is operated, the keys such as stop / play / pause / fast reverse / fast forward / chapter skip are used for driving the SIMPLINK device, but not used for the DVR feature.
TIMESHIFT MODE(PAUSE & REPLAY OF LIVE TV)
This function allows the unit to automatically record live TV and make it available for reviewing at any time.
With Timeshift turned on, you may pause and rewind normal TV viewing at any time without missing any of the live broadcast.
(TimeShift Mode and Recording functions might not work if the signal strength is weak.)
SETUPO TimeShift Mode PICTURE O Record Quality AUDIOO Recorded TV TIMEO Schedule List
Press the M E N U button and then use D / E button to select the DVR menu.

When pressing the O button delaying Timeshift, Timeshift is dumped. And delayed time is recording.

Using the remote control

You can shift playback to any point within the recorded programme When playing,
repeatedly, press the R E W( FF) button to speed up FF -> FFF -> FFFF -> FFFFF ->FFFFFF.
repeatedly, press the F F( GG) button to speed up GG-> GGG -> GGGG -> GGGGG -> GGGGGG.
Pressing these buttons repeatedly increases the fast forward/reverse speed.

Press the I FF / GGI

button to jump about 20 seconds forward.
Pressing the I FF button to jump about 8 seconds backward.
During playback, press the P a u s e ( I I ) button. Still screen is displayed. I Repeatedly press the P a u s e ( I I ) button to advance frame by frame.
II Press the P a u s e ( I I ) button and then use the F F (GG) button for slow motion (the icon is displayed.) I Press the P a u s e ( I I ) button and then use the F F ( FF ) button for slow motion (the icon is displayed.)
When using the F or G button during playback a cursor indicating the position can be viewed on the screen.

P L A Y ( G) LIVE TV

Press the P L A Y ( G) button to return to normal playback. If you want to return to the current live broadcast, press the LIVE TV button.

FORMAT HARD DISK

Erases all programmes and initializes the hard disk.

SETUPO TimeShift Mode

Press the M E N U button and then use D / E button to select the D V R menu. Press the G button and then use D / E button to select HDD Format. Press the G button to start HDD Format. if you press the G button, this message is displayed.

PICTURE O

Record Quality AUDIOO Recorded TV TIMEO Schedule List
OPTIONO Manual Record DVRG HDD Format DivX Reg. Code USB Backup USB HDD Format

TimeShift Mode

Do you want to format HDD?

Yes No

Record Quality Recorded TV Schedule List Manual Record HDD Format DivX Reg. Code USB Backup To set
if you select Yes, this message is displayed.
HDD formatting is started

USB HDD Format Subtitle

When completing, this message is displayed.
HDD formatting is completed.

INSTANT RECORDING

Use this function to record the programme you are watching on the main screen.

Instant Record

This function records the currently displayed programme.

Press the D V R button to display H o m e menu. Use the D / E button to select the M a n u a l R e c o r d and then use the O K or G button.
Recorded TV Manual Record
M a n u a l R e c o r d screen is displayed as shown below. Use the D / E / F / G button to set the I n p u t, P R, D a t e, T i m e, D u r a t i o n, F r e q u e n c y.
Schedule List Photo List Music List Movie List TV Menu
I n p u t : Select the input source from the TV, AV1, AV2, AV3,Component(480i/576i). G P R : Select either the current programme or a scanned programme. G D a t e : You can select a date up to one month in the future. G T i m e / D u r a t i o n : Ensure you have set correctly. G F r e q u e n c y : Choose among Once, Daily and Weekly.
Manual Record Sun,Jan 1 11:03 Input AV1 PR -Date Sun.Jan 1 Time 00:03 Duration Frequency 30min Once

Navigation

Modify
After setting the M a n u a l R e c o r d , press the O K button.

SCHEDULE LIST

This function is used to show scheduled recordings. This function is available to use in DVR menu. You can store up to 8 programmes.

NORMAL

Press the D V R button to display H o m e menu. Use the D / E button to select the Schedule List and then use the O K or G button. Schedule List screen is displayed as shown below. Use the D / E button to select recorded programme.
Schedule List AV1 Input AV1 AV1 Thu. Jun 14 Date Thu. Jun 14 Thu. Jun 14

Schedule List

Photo List Music List Movie List

TV Menu

10:20~10:50 (30min) Time 10:20 11:12 Duration 30 min 30 min
Thu. Jun 14 10:18 Frequency Once Once

RECORD QUALITY

When recording analogue broadcasts and external input signals, the Record Quality can be selected. This function is not available while a recording is taking place.

Popup Menu

Press the M E N U button and then use D / E button to select the DVR menu. Press the G button and then use D / E button to select Record Quality. Press the G button and then use D / E button to select High or Normal. Press the EXIT button to return to normal TV viewing.
TimeShift Mode Record Quality Record Quality Recorded TV Schedule List Manual Record HDD Format DivX Reg. Code USB Backup USB HDD Format Subtitle

High Normal

TO USE THE USB DEVICE
Precautions when using the USB device
Only a USB storage device is recognizable. G If the USB storage device is connected through a USB hub, the device is not recognizable. G A USB storage device using an automatic recognition programme may not be recognized. G A USB storage device which uses its own driver may not be recognized. G In case of a card reader, up to four memory cards are concurrently recognizable. G The recognition speed of a USB storage device may depend on each device. G Please do not turn off the TV or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. G Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files or image files. G Please use only a USB storage device which was formatted as a FAT32 file system provided with the Windows operating system. In case of a storage device formatted as a different utility programme which is not supported by Windows, it may not be recognized. G Please connect power to a USB storage device which requires an external power supply. If not, the device may not be recognized. G Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered by USB maker or an excessively long cable, the device may not be recognized. G Some USB storage devices may not be supported or operated smoothly. G If the name of a folder or file is too long, it will not be displayed or recognized. G Please backup the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage. G Supported maximum external HDD size is up to 400GB. G Supported maximum USB memory stick size is up to 32GB.

USB Backup is started. Copying to USB HDD (1/1)

75% Close Stop

Rename Copy to USB HDD Cancel
if you press the A button, this message is displayed.
Do you really want to cancel the backup?
When 'Yes is selected, the backup is cancelled and is converted back to input mode. If more than two files are transferred, the transferred file is stored, and the backup operations on the files in progress of transferring and scheduled for backup are cancelled. I When No is selected, returns to the backup process screen.
While backup is being performed in the background, the status of the copy progress can be checked by pressing the OK button.

Copying 0%( 1/1 )

C a n c e l : Close the Pop-up menu.
Repeatedly, press E X I T button to return to TV viewing or press D V R button to return to the H o m e menu.
If the HDD has a problem performing a recording related function, this message is displayed. If the temperature is below zero (0), a warning message is displayed and you will not be able to use the DVR functions.
HDD initialisation is in progress.
Cannot operate DVR at low temperature. 4

USB BACKUP

- When the Recorded List is stored exceeding the capacity of the internal HDD, the USB backup feature allows the backup of Recorded List of the internal HDD to the external HDD for backup connected through USB. - To use USB backup function, be sure to initialize the USB HDD using DVR menuUSB HDD format. OK - To use USB Backup, USB HDD is necessary more than 40 GB, 1 partition disk, and FAT32 system. - It only supports file backup features; therefore, playback of the Recorded List directly from the current OSD is not allowed. In order to play the recorded contents, the files must be moved to the internal HDD through the Copy to Recorded List from the popup menu. - View the list of the backed up recorded programme by using the Copy to USB HDD from the Recorded TV'. - It moves to the external HDD list for backup connected by USB.
SETUPO PICTURE O AUDIOO TIMEO
TimeShift Mode Record Quality Recorded TV Schedule List Manual Record HDD Format DivX Reg. Code Backup USB Backup
Press the M E N U button and then use D / E button to select the D V R menu. Press the G button and then use D / E button to select USB Backup. Press the G button to start USB Backup. Recorded TV screen is displayed as shown. Use the P R + / - button to navigation in the recorded programme. Use M A R K button to mark or unmark a recorded programme. Use D / E button to navigation the appropriate recorded programme, then press the O K button to show up the popup menu. Mark All : mark all recorded programmes on the screen. G Unmark All : Change marked recorded programmes to unmarked recorded programmes. G D e l e t e : Delete the selected recorded programmes.

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of the PC computer.

Refer to p. 1 17

FF 0~3 0~Key Code * *

Error Acknowledgement

[Command2][ ][Set ID][ ][NG][Data][x] * The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from non-viable functions or communication errors. Data 1: Illegal Code 2: not support function 3: Wait more time
01. Power (Command 2 : a)
G To control Power On/Off of the set.
05. Volume Control (Command 2 : f)

G To adjust volume.

[k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Ack [a][ ][Set ID][ ][OK][Data][x]

G To show Power On/Off.

You can also adjust volume with the VOLUME buttons on remote control. Transmission 1 : Power On [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : * Refer to Real data mapping 1. See page 1. Ack [f][ ][Set ID][ ][OK][Data][x] 06. Contrast (Command 2 : g)
G To adjust screen contrast.
[k][a][ ][Set ID][ ][FF][Cr]
[a][ ][Set ID][ ][OK][Data][x] * In like manner, if other functions transmit 0xFF data based on this format, Acknowledgement data feed back presents status about each function. 02. Aspect Ratio (Command2:c)
G To adjust the screen format. (Main picture format)
You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : * Refer to Real data mapping 1. See page 1. Ack [g][ ][Set ID][ ][OK][Data][x] 07. Brightness (Command 2 : h) G To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : * Refer to Real data mapping 1. See page 1. Ack [h][ ][Set ID][ ][OK][Data][x] 08. Colour (Command 2 : i)
G To adjust the screen colour.
You can also adjust the screen format using the ARC (Aspect Ratio Control) button on remote control or in the PICTURE menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Date 1: Normal screen (4:3) 2: Wide screen (1 6:9) 4: Zoom1 5: Zoom2 6: Original 7: 14:9
[c][ ][Set ID][ ][OK][Data][x] * Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. 03. Screen Mute (Command 2 : d)
G To select screen mute on/off.

G To adjust red in colour temperature.
You can also control the PIP/DW using the PIP button on the remote control or in the PIP/DW menu.
[k][n][ ][Set ID][ ][Data][Cr] Data 0: PIP/DW off 1: PIP Ack [n][ ][Set ID][ ][OK][Data][x] 2: DW1 3: DW2
Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : * Refer to Real data mapping 2. See page 1. Ack [v][ ][Set ID][ ][OK][Data][x] 18. Green Adjustment (Command 2 : w)
G To adjust green in colour temperature.
[k][w][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : * Refer to Real data mapping 2. See page 1. Ack [w][ ][Set ID][ ][OK][Data][x]
19. Blue Adjustment (Command 2 : $)
G To adjust blue in colour temperature.
22. ISM Method (Command 1 : j, Command 2 : p)
G To control the ISM method. You can also adjust ISM
[k][$][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : * Refer to Real data mapping 2. See page 1. Ack [$][ ][Set ID][ ][OK][Data][x]

Method in OPTION menu.

[j][p][ ][Set ID][ ][Data][Cr] Data 0: Normal 1: White wash 2: Orbiter 3: Inversion
20. Tune Command/Channel Tuning (Command1:m, Command2:a) G To select a programme for the main picture. Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Data 0: Min: 0 ~ Max: 63 (0~CPr is on) , Refer to Real data mapping 1. 1: Dont care 2: 0 : Main 1 : Sub Ack [$][ ][Set ID][ ][OK][Data][x] 21. Abnormal State (Command 2 : z)
G To recognize an abnormal state.
[p][ ][Set ID][ ][OK/NG][Data][x] 23. Low Power (Command 1 : j, Command 2 : q)
G To reduce the power consumption of the set. You can
also adjust Low Power in OPTION menu.
[j][q][ ][Set ID][ ][Data][ ][Cr] Data 0 : Off 1 : On Ack [q][ ][Set ID][ ][OK/NG][Data][x] 24. Auto Configure (Command 1 : j, Command 2 : u) G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]
This feature is not available for all models. Transmission [k][z][ ][Set ID][ ][FF][ ][Cr] Data FF : Read Ack [z][ ][Set ID][ ][OK][Data][x] Data 0: Normal (Power on and signal exist) 1: No signal (Power on) 2: Turn the TV off by remote control 3: Turn the TV off by sleep time function 4: Turn the TV off by RS-232C function 5: 5V down 6: AC down 7: Turn the TV off by Fan Alarm function 8: Turn the TV off by Off time function 9: Turn the TV off by Auto sleep function

a: Turn the TV off by AV board detect
* Real data mapping : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 73 : Step 74 : Step C7: Step 199 FE : Step 254 FF : Step 255
* Real data mapping : -: -: -:0 4E : +38 4F : +: +40
* This function is read only.
25. K e y (Command1:m, Command2:c)
G To send IR remote key code.
27. PIP Input select (Command1:x, Command2:y)
G To adjust input source for sub picture in PIP mode
[m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 1 1. 1
[x][y][ ][Set ID][ ][Data][Cr] Data Structure

MSB 0 LSB 0

Ack [c][ ][Set ID][ ][OK][Data][x]
26. Input select (Command1:x, Command2:b) (Main Picture Input)
G To select input source for set.
External Input External Input 0

Input Number Data

[x][b][ ][Set ID][ ][Data][Cr] Data Structure
Analog AV Component RGB-PC HDMI

Input Number 0 0

Data 0
Input1 Input2 Input3 Input4
[y][ ][Set ID][ ][OK][Data][x]
[b][ ][Set ID][ ][OK][Data][x]