POWER switches the set on from standby or off to standby.

MUTE POWER

TV/AV MULTIMEDIA I/II
I/II Selects the language during dual language broadcast. Selects the sound output. ARC Changes the picture format. MENU Displays on screen menus one by one. Exits the current menu. Memorizes menu changes.
D / E (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. F / G (Volume Up/Down) adjusts the volume. adjusts menu settings. OK accepts your selection or displays the current mode.

VOL PR VOL

NUMBER buttons
SSM To select the sound appropriate to your viewing programme character.
PSM Adjusts the factory preset picture according to the room. Q.VIEW Returns to the previously viewed programme. Note : This function works only when Favourite programme is set to Off. Otherwise each press of this button will select a stored favorite programme.
SLEEP Sets the sleep timer. TEXT These buttons are used for teletext. For further details, see the Teletext section. COLOURED BUTTONS These buttons are used for teletext (only TELETEXT models) or programme edit.
Q.VIEW TEXT REVEAL ? SIZE UPDATE HOLD

MODE M MIX TIME

INDEX i
Location and Function of Controls
<Front Panel Controls>
1. Remote Control Sensor 2. Power Indicator Illuminates red in standby mode, Illuminates green when the set is turned on. 3. Power Button Switches the set on from standby or off to standby. 4. TV/AV Button Selects the TV, AV, Component, RGB or HDMI modes. Switches the set on from standby. 5. MENU Displays on screen menus one by one. Exits the current menu. Memorizes menu changes.
6. OK Accepts your selection or displays the current mode. 7. D / E (Programme Up/Down) Selects a programme or a menu item. Switches the set on from standby. F / G (Volume Up/Down) Adjusts the volume. Adjusts menu settings.
- Shown is a simplified representation of the set. - Here shown may be somewhat different from your set.

<Back Panel>

AV5 V5

S-VIDEO VIDEO

COMPONENT

R AUDIO L/MONO

AC INPUT

(MONO)

S-VIDEO HDMI AUDIO INPUT RGB INPUT

AV4 V4

AUDIO AUDIO

Antenna

REMOTE CONTROL

RS-232C INPUT

(CONTROL/SERVICE)

VARIABLE VARIABLE AUDIO OUT
1. HDMI(DVI VIDEO) / AUDIO INPUT / RGB INPUT Connect the monitor output socket of the PERSONAL COMPUTER, DVD or STB to this socket. Note: If you want to use RGB/DVI audio, we strongly recommend that you use the cable that has a core, or the EMI Filter core along with separate cable. 2. CONTROL LOCK / REMOTE CONTROL 3. RS-232C INPUT(CONTROL/SERVICE) PORT Connect to the RS-232C port on a PC. 4. COMPONENT INPUT Connect DVD video outputs to Y, PB, PR of COMPONENT INPUT and audio outputs to Audio sockets of AUDIO INPUT. AUDIO/VIDEO IN SOCKETS (AV4) Connect the audio/video out sockets of external equipment to these sockets. S-VIDEO/AUDIO IN SOCKETS Connect the S-VIDEO out socket of an VCR to the S-VIDEO socket. Connect the audio out sockets of the VCR to the audio sockets as in AV4.
5. VARIABLE AUDIO OUTPUT 6. EURO SCART SOCKET Connect the euro scart socket of the VCR to these sockets. Note: If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable. 7. ANTENNA INPUT 8. POWER CORD SOCKET This set operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the set on DC power. 9. AUDIO/VIDEO INPUT (AV5) S-VIDEO/AUDIO IN SOCKETS
Displayable Monitor Specification

RGB / HDMI mode

Resolution 640x350 720x400 Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.468 70.09 37.861 31.469 37.927 31.469 35.000 640x480 37.861 37.500 43.269 31.500 848x480 37.799 39.375 31.500 852x480 37.799 39.375 35.156 37.879 800x600 48.077 46.875 53.674 832x624 49.725 48.363 1024x768 56.476 60.023 68.677 54.348 1152x864 1152x870 1280x960 1280x1024 63.995 67.500 68.681 60.023 63.981 85.08 70.08 85.03 59.94 66.66 72.80 75.00 85.00 60.00 70.00 75.00 60.00 70.00 75.00 56.25 60.31 72.18 75.00 85.06 74.55 60.00 70.06 75.02 85.00 60.05 70.01 75.00 75.06 60.02 60.02 1366x768 1360x768 1024x768 832x624 800x600 852x480 848x480 640x480
Resolution 640x350 720x400 Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.468 70.09 37.861 31.469 37.927 31.469 35.000 37.861 37.500 43.269 31.500 37.799 39.375 31.500 37.799 39.375 35.156 37.879 48.077 46.875 53.674 49.725 48.363 56.476 60.023 68.677 47.700 59.625 68.500 47.700 59.625 69.500 54.348 63.995 67.500 77.487 1152x870 1280x768 1280x960 1280x1024 68.681 47.693 60.091 68.504 60.023 63.981 85.08 70.08 85.03 59.94 66.66 72.80 75.00 85.00 60.00 70.00 75.00 60.00 70.00 75.00 56.25 (RGB) 60.31 72.18 75.00 85.06 74.55 60.00 70.06 75.02 85.00 60.00 75.02 85.00 60.00 75.02 85.00 60.05 70.01 75.00 85.00 75.06 60.00 75.00 85.00 60.02 60.02

42PX3RV series

1152x864

50PX3R series

Accessories
TV/AV MULTIMEDIA I/II LIST ARC MENU PR
Q.VIEW TEXT REVEAL ? SIZE

AS mark

UPDATE HOLD

Owners Manual

Remote Control handset

2-Eye Bolts

1.5V 1.5V

Alkaline batteries

Power Cord

2-Wall brackets

Joinning the set assembly to the wall to protect the set tumbling
- Secure the set assembly by joinning it to a wall by using the Eye Bolts/Wall brackets.
After the set must be mounted on a desktop, install the Eye Bolts on the set as shown. Insert the 2 Eye Bolts and tighten securely, in the holes on the bracket. Install the wall brackets on the wall with 2 bolts, (not supplied with the product), as shown. Match the height of the Eye Bolts and the wall brackets. Check to be sure the brackets are tightened securely.
Secure the set assembly to the wall with strong strings or wound wire cables, (not supplied with the product), as shown.

Optional Extras

Optional extras can be changed or modified for quality improvement without any notification new optional extras can be added. Contract your dealer for buying these items.
Tilt wall mounting bracket

Ceiling mounting bracket

Video cables

Audio cables

SPECIFICATIONS
NOTE : Specifications and others are subject to change without notice for improvement.

Application Range

This spec is applied to the 42PDP TV used MF-056C Chassis.

Specification

Each part is tested as below without special appointment. 1) Temperature : 255C (779F), CST : 405 2) Relative Humidity: 6510% 3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz) * Standard Voltage of each product is marked by models. 4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with BOM. 5) The receiver must be operated for about 20 minutes prior to the adjustment.

Test Method

1) Performance : LGE TV test method followed. 2) Demanded other specification Safety: CE, IEC specification EMC : CE, IEC Model Name 42PX3RVA-ZC Market EU Remark Safety : IEC/EN60065, EMI : EN55013, EMS : EN55020

General Specification

1. General Specification No 3 Item Display Screen Device Aspect Ratio PDP Module Specification 42 inch wide Color Display Module 16:9 PDP42V7xxxx RGB Closed Type, Film Filter 4 Operating Environment 1) Temp : 0~40 deg 2) Humidity : 0~85% 5 Storage Environment 1) Temp : -20~60 deg 2) Humidity : 0~85% 6 Input Voltage 100-240V~, 50/60Hz Maker : SONY/ Sanken LGE SPEC PDP Remark
2. Model Specification( 42PX3RVA-ZA)

No 3 Market

Item EU

Remark

Broadcasting system Available channel
PAL B/G/I/D/K, SECAM L/L BRAND VHF/UHF CATV PAL C1~C69 S1~S47 SECAM
Receiving system Scart Jack(3EA) Video input(2EA) S-Video Input(2EA) Component Input(2EA) RGB Input(1EA)
Upper Heterodyne PAL, SECAM PAL, SECAM, NTSC PAL, SECAM, NTSC Y/Cb/Cr, Y/Pb/Pr RGB-PC RGB-DTV 4 System : PAL, SECAM, NTSC,PALSystem : PAL, SECAM, NTSC,PAL60

HDMI Input(1EA)

HDMI-PC HDMI-DTV
Audio Input(4EA) Audio Output(1EA) Wired Control
PC Audio(1EA), Component, AV(2EA) Variable Audio Out Discrete IR

L/R Input L/R Output

ADJUSTMENT INSTRUCTIONS

1. Application Object

These instructions apply to the MF-056C Chassis.
3-2. Channel memory Method
1) Select PDP and Hurricane on Model dialog. And check your connection in Communication dialog. (If your connection is NG, then set your PORT(COM1,2,3,.) correctly.) 2) Connect RS-232C cable and turn on the power. (If your connection has completed, you can see Ready.) [ If your set is not an end products but only a board, you have to make your board to Stand-by state (LED_R). And you have to Download in Stand_by power state.

2. Specification

(1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument. (2) Adjustment must be done in the correct order. (3) The adjustment must be performed in the circumstance of 255C of temperature and 6510% of relative humidity if there is no specific designation. (4) The input voltage of the receiver must keep 100-220V, 50/60Hz. (5) The receiver must be operated for about 15 minutes prior to the adjustment. After RGB Full white HEAT-RUN Mode, the receiver must be operated prior to adjustment. O Enter into HEAT-RUN MODE 1) Press the POWER ON KEY on R/C for adjustment. 2) OSD display and screen display 100% full WHITE PATTERN.

[ Set is activated HEAT-RUN without signal generator in this mode. [ Single color pattern(RED/BLUE/GREEN) of HEAT-RUN mode uses to check PANEL. Caution) If you turn on a still screen more than 20 minutes (Especially digital pattern, cross hatch pattern), after image may be occur in the black level part of the screen.
(Fig. 2) 3) Select proper CH_memory file(*.nvm) for each model at [NVRAM Download] $ [Write Batch] Next, select proper binary file(*.bin) including the CH information for each model at [NVRAM File]. 4) Click the [Download] button. It means the completion of the CH memory download if all items show OK and Status is changed by PASS at the lower right corner of the window. 5) If you want to check whether the CH information is memorized correctly or not, click the [Verify] button. And then compare NVRAM File(*.bin) with the CH information downloaded.

3. Channel memory

3-1. Setting up the LGIDS
1) Install the LGIDS. (idsinst.exe) 2) After installation, restart your PC. 3) Extract [files.zip] to folder [c:\LGIDS\files]. 4) Start LGIDS.

(Fig. 3)

(Fig. 1)
Each PCB assembly must be checked by check JIG set. (Because power PCB Assembly damages to PDP Module, especially be careful)

5-2. Setting of device

4. POWER PCB Assy Voltage Adjustments (Va, Vs Voltage Adjustments)
4-1. Test Equipment : D.M.M. 1EA 4-2. Adjustment Method [P/No 3501V00220A(Sanken) B/D, P/No 6709V00010A(LGIT) B/D]

(1) Va Adjustment

1) After receiving 100% Full White Pattern, HEAT RUN. 2) Connect + terminal of D.M.M to Va pin of P807, connect - terminal to GND pin of P807. 3) After turning RV501, voltage of D.M.M adjustment as same as Va voltage which on label of panel right/top. (Deviation; 0.5V) (Fig. 5) Connection Diagram of DDC download
5.3. Preparation for Adjustment
1) As above Fig. 5, Connect the Set, EDID Download Jig, PC & Cable. 2) Turn on the PC & EDID Download Jig. And Execute the S/W : EDID TESTER Ver,2.5 3) Set up S/W option Repeat Number : 5 Device Address : A0 PageByte : 8 4) Power on the Set
5.4. Sequence of Adjustment
(1) DDC data of Analog-RGB

1) Init the data

(2) Vs Adjustment
1) Connect + terminal of D.M.M to Vs pin of P807, connect terminal to GND pin of P807. 2) After turning RV401, voltage of D.M.M adjustment as same as Va voltage which on label of panel right/top. (Deviation; 0.5V)
2) Load the EDID data.(Open File) [Analog-RGB : TYPE_VGA.ANA] [Digital(HDMI) : TYPE_VGA.DVI] 3) Set the S/W as below.

(Fig. 4) Connection diagram of power adjustment for measuring
5. EDID (The Extended Display Identification Data)/ DDC (Display Data Channel) download
5-1. Required Test Equipment
1) Adjusting PC with S/W for writing EDID Data.(S/W : EDID TESTER Ver.2.5) 2) A Jig for EDID Download 3) Cable : Serial(9Pin or USB) to D-sub 15Pin cable, D-sub 15Pin cable, DVI to HDMI cable. 4) Push the Write Data & Verifybutton. And confirm Yes. 5) If the writing is finished, you will see the OK message.
6. Auto AV(CVBS) Color Balance

6-1. Requirement

- This AV color balance adjustment should be per formed before White Balance Adjustment.
Auto adjustment Map(RS-232C) MF-056C : RZ-42PX30 Type Baud Rate 115200 Data bit 8 RS232 Stop bit 1 Parity NONE

6-2. Required Equipme

1) Remote controller for agdjustment 2) AV Pattern Generator : 802F Pattern Generator, Master (MSPG-925FA), etc (Which has PAL Composite Video format output with standard (1.0 Vpp) Vertical 100% Color Bar Pattern as Fig.6)
Index Cmd1 Cmd2 R Gain G Gain Protocol B Gain Setting R Offset G Offset B Offset j j j j j j a b c d e f
Data Min Value Max Value 00(00) 00(00) 00(00) 00(00) 00(00) 00(00) 255(FF) 255(FF) 255(FF) 255(FF) 255(FF) 255(FF)
6-3 Method of Auto RGB Color Balance
1) Input the PAL Composite Video (Fig.6.100% Color Bar Pattern) into video input. (RZ-42PX30 : AV4/AV5 Input 50Hz) 2) Set the PSM to Standard mode in Picture menu. 3) Press INSTART key on R/C for adjustment. 4) Press the G (Vol. +) key operat to set, then it becomes automatically. 5) Auto-RGB OK means completed adjustment.
7-3. Adjustment of White Balance
Operate the zero-calibration of the CA-100, then stick sensor to PDP module surface when you adjust. O For manual adjustment, it is also possible by the following sequence. 1) Select white pattern of heat-run mode by pressing power on key on remote control for adjustment then operate heat run more than 15 minutes. 2) As below Fig.7, Supply Window or Gray step pattern to Video input (RZ-42PX30 : AV4/AV5 INPUT 50Hz) 3) Press the TV/AV KEY on R/C for converting input mode. 4) Set the PSM to Standard mode in Picture menu. 5) Enter the White Balance adjustment mode by pressing the INSTART key twice(White Balance) on R/C 6) Stick sensor to center of the screen and select each items (Red/Green/Blue Gain and offset) using D/E(CH +/-) key on R/C. 7) Adjust High Light with R Gain/ B Gain and Low light with G Offset/ B Offset using F/G(VOL +/-) key on R/C. 8) Adjust it until color coordination becomes as below. (G Gain:7A/ R Offset:7F/ G Offset:7E/ B offset:80 is Fixed) [MF-056C : RZ-42PX30] - VGA 42 Bright : High Light : Cd/m2 Color-Coordinate : High Light : X : 0.285 0.003 Y : 0.290 0.003 Color Temperature : 9,300K 500K 9) When adjustment is completed, Exit adjustment mode using EXIT key on R/C

(Fig. 6) Auto AV(CVBS) Color Balance Test Pattern
7. Adjustment of White Balance

7-1. Required Equipment

1) Remote controller for adjustment 2) Color Analyzer (CA-100 or same product) 3) Auto W/B adjustment instrument(only for auto adjustment) 4) AV Pattern Generator
7-2. Connecting diagram of equipment for measuring (For Auto Adjustment)
COLOR ANALYZER TYPE ; CA-100

CVBS signal input

M SPG-/ M STG- 0 0
RS-232C Serial Communication
(Fig. 7) Connection Diagram of Auto W/B Adjustment
(Fig. 8) Position and Pattern for Manual Adjustment of White Balance
8. Auto Component Color Balance
8-1. Required Test Equipment
1) Remote controller for adjustment 2) 802F Pattern Generator (Which has 720p Ypbpr output & PC 1024x768 60Hz with Standard(0.7Vpp) Vertical 100% Color Bar Pattern as Fig.8)
10. Default Value in Adjustment mode
10-1. Auto Color Balance(Component/RGB)
Auto Color Balance(Hex) Auto-RGB G To Red Offset1 Green Offset1 Blue Offset1 Red Offset2 Green Offset2 Blue Offset2 Red Gain Green Gain Blue Gain Reset G To Set 11 Set
8-2. Method of Auto Component Color Balance
1) Input the Component 720p 100% Color Bar signal into Component1 or Component2. 2) Set the PSM to Standard mode in Picture menu. 3) Press INSTART key on R/C for adjustment. 4) Press the G(Vol. +) key operate To set, then it becomes automatically. 5) Auto-RGB OK means complete adjustment
(Fig. 11) Default Value on OSD

10-2. White Balance

White Balance(Hex)
(Fig. 9) Auto Component Color Balance Test Pattern
9. Auto RGB Color Balance
9-1. Required Test Equipment
1) Remote controller for adjustment 2) 802F Pattern Generator, Master (MSPG-925FA), etc. (Which has XGA 60Hz PC Format output with standard (0.7Vpp) horizontal black and white pattern as Fig.10)
Red Gain 82 Red Offset 7A Green Gain 86 Green Offset 7F Blue Gain 7E Blue Offset 80 Reset G To Set
(Fig. 12) Default Value on OSD
9-2. Method of Auto RGB Color Balance
1) Input the PC 1024x768 60Hz horizontal black and white pattern into RGB. 2) Set the PSM to Standard mode in Picture menu. 3) Press ADJ key on R/C for adjustment. 4) Press the G(Vol. +) key operate To set, then it becomes automatically. 5) Auto-RGB OK means completed adjustment.

Level : 0

Level : 255
(Fig. 10) Auto RGB Color Balance Test Pattern

TROUBLE SHOOTING GUIDE

1. Power Board
1-1. The whole flowchart which it follows in voltage output state

Start check

Doesn't the screen whole come out?
It is identical with Power Off condition? Yes
Is the Interface signal operated?
Yes 2. Check the Interface signal condition.
1. Check the Power Off condition.
Doesn't the low pressure output come out?
Doesn't the St-by 5V signal come out? Yes
Doesn't the 5V Monitor signal come out? Yes 4. Check the 5V Monitor signal circuit.
Doesn't the VSC signal RL-ON come out? Yes 5. Check the VSC RL-ON signal. No
3. Check the St-by 5V signal circuit.
Doesn't the high tension output come out?
Doesn't the VSC signal Vs-ON come out? Yes
Doesn't the Vs, Va voltage output come out? Yes 8. Check the Vs, Va voltage output circuit.
Doesn't the VSC low pressure output come out? Yes 6. Check the VSC low pressure output
7. Check the VSC Vs-ON signal
High tension output voltage Drop it occurs?
When remove the Y, Z B/D Module Input Connector, Power Board high tension output voltage Drop it occurs? Yes 9. Check the Power Board Output high tension circuit
When remove the Y B/D Module Input Connector, output voltage Drop it occurs? Yes 10. Check the Z B/D Module output circuit
When remove the Z B/D Module Input Connector, output voltage Drop it occurs? Yes 11. Check the Y B/D Module output circuit
Manufacture enterprise meaning of a passage
1-2. Sony Power Board Structure
T502: Vs Trans T702: Va Trans T101: St-by Trans

T103: Low Voltage Trans

1-3. Sanken Power Board Structure
T221: Vs Trans T271: Va Trans T121: St-by Trans

T201: Low Voltage Trans

2. No Power

(1) Symptom

Doest minute discharge at module. Non does not come in into the front LED.

(2) Check follow

No Is plug in power cord? Yes No Connect Cable. Plug in power cord.
Is connect the Line Filter and Power Board Cable? Yes
Is normal the Fuse(F101) on Power Board? Yes

No Replace Fuse.

Is connect the Power Board and 7P of VSC Board Cable? Yes

No Connect Cable.

After remove the cable connect to Power Board(except the CN101 connection cable), authorizes the AC voltage marking on manual. When ST-BY 5V does not operate, replace Power Board.

3. Protect Mode

After once shining, it does not discharge minutely from module The Rely falls(The sound is audible click) It is converted with the color where the front LED is red from green.
Is normal the Power Board? Yes Is normal the each connector? Yes Is normal the Y- Board? Yes Is normal the Z- Board? Yes Is normal the X- Board? Yes Is normal the Ctrl Board? Yes Is normal the VSC Board? Yes Is normal the COF of X, Y, Z? No After crisis COF of each board, check the normality operates. If in case normality operates, correspondence COF Fail is replace the module. No Is normal the output voltage after remove P1001, P1100? Yes After remove P1001, 1100 normal operation: Replace VSC Board No Is normal the output voltage after remove P1, 2, 4, 9, 10 connector of Ctrl-B/D? Yes Replace X-Board. No Is normal the output voltage after remove P1, 2, 3, 4, 5 connector of X-B/D? Yes After remove P1, P2, P3 output voltage normality: Replace Right X-B/D After remove P4, P5 output voltage normality: Replace Left X-B/D No Is normal the Fuse(FS1, FS2) on ZB/D? (In case of open is replace) Yes Is normal the output voltage after remove P1 connector of Z-B/D? Yes Replace Z-Board. No Is normal the Fuse(FS2) on Y-B/D? (In case of open is replace) Yes Is normal the output voltage after remove P5, P6 connector of Y-B/D? Yes Replace Y-Board. No After connecting well each connector, the normality it operates? No Replace connector. No Is output the normality Low/High voltage except Stand-by 5V? No Replace Power Board.

REPLACEMENT PARTS LIST

LOCA. NO PART NO DESCRIPTION LOCA. NO Q202 Q203 Q204 Q205 Q206 Q207 Q300 Q303 Q304 Q305 Q400 Q401 Q402 Q403 Q404 Q405 Q406 Q407 Q408 Q409 Q410 Q411 PART NO 0TR387500AA 0TR150400BA 0TR150400BA 0TR387500AA 0TR150400BA 0TR150400BA 0TR387500AA 0TR387500AA 0TR387500AA 0TR150400BA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR387500AA 0TR102008AA 0TR102008AA 0TR387500AA 0TR102008AA 0TR387500AA 0TR387500AA 0TR387500AA DESCRIPTION CHIP 2SC3875S(ALY) KEC CHIP 2SA1504S(ASY) KEC CHIP 2SA1504S(ASY) KEC CHIP 2SC3875S(ALY) KEC CHIP 2SA1504S(ASY) KEC CHIP 2SA1504S(ASY) KEC CHIP 2SC3875S(ALY) KEC CHIP 2SC3875S(ALY) KEC CHIP 2SC3875S(ALY) KEC CHIP 2SA1504S(ASY) KEC CHIP 2SC3875S(ALY) KEC CHIP 2SC3875S(ALY) KEC CHIP 2SC3875S(ALY) KEC CHIP 2SC3875S(ALY) KEC CHIP 2SC3875S(ALY) KEC KRA102S R/TP KEC SOT23 CHIP TR KRA102S R/TP KEC SOT23 CHIP TR CHIP 2SC3875S(ALY) KEC KRA102S R/TP KEC SOT23 CHIP TR CHIP 2SC3875S(ALY) KEC CHIP 2SC3875S(ALY) KEC CHIP 2SC3875S(ALY) KEC
IC1000 IC1001 IC1002 IC1003 IC1004 IC1005 IC1100 IC1101 IC1102 IC1103 IC1104 IC1200 IC1201 IC202 IC300 IC301 IC400 IC401 IC402 IC403 IC404 IC500 IC502 IC600 IC800 IC802 IC900 IC901 IC902 0IPRPML001A 0IMCRRH001A 0IMCRFA010A 0IPMG00027A 0IMCRRH001A 0IMCRRH001A 0IMCRRH001A 0IPRPML001A 0IPMG00027A 0IPMGKE030A 0IPMG00027A 0IPRPS5005A 0IMMRAL014B 0IPMGON013B 0ISO206900A 0ISA721700C 0IMCRMN028B 0ILNR00015A 0IMCRTI028C 0ISS455880A 0IPH741400E 0IMMRAL014B 0IPH741400E 0IPRP00009A 0IMCR02005A 0IMP242560A 0IMMRAL016D 0IMMR00002A 0IMMR00002A MIC39100 3P SOT223 R/TP LDO TYPE 2.5V BA033FP-E2 ROHM 3P-SOP,TO252-3 R/TP 3.3V KA7809R, FAIRCHILD 2P D-PAK, R/TP IC SC156515M-1.8TR SEMTECH 5P/TO-263-5 R/TP BA033FP-E2 ROHM 3P-SOP,TO252-3 R/TP 3.3V BA033FP-E2 ROHM 3P-SOP,TO252-3 R/TP 3.3V BA033FP-E2 ROHM 3P-SOP,TO252-3 R/TP 3.3V MIC39100 MICREL 3P SOT223 R/TP LDO TYPE SC156515M-1.8TR SEMTECH 5P/TO-263-5 KIA78R05F KEC 5PIN DPAK R/TP 1A,5V SC156515M-1.8TR SEMTECH 5P/TO-263-5 SII9011CLU(PB FREE) SILICON IMAGE 128P AT24C02N-10SI-2.7 ATMEL 8P SOIC R/TP MC34063ADR2G ON SEMI SO-8P R/TP CXA2069Q QFP64 BK I2C BUS AV S/W LA7217M MFP14 TP SYNC SEPARATOR ML-00BA MSP4410K MICRONAS 80P/PQFP NSP-2100A,LF NEOFIDELITY TQFP 64P TAS5122DCAR 56P/TSSOP R/TP 30W STEREO KA4558D 8SOP OP AMP 74HC14D 14SOP TP SHITTER TRIGGER AT24C02N-10SI-2.7 ATMEL 8P SOIC 74HC14D 14SOP TP SHITTER TRIGGER ICL3232CBNZ INTERSIL 16P/SOP R/TP FLI8532BC-LF GENESIS 416P/PBGA 24LC256-I/SM 8P,SOP TP 256K IIC SERIAL AT49BV160-70TI ATMEL 48P TSOP K4D261638F-LC50,LF TSOPII 66P K4D261638F-LC50,LF TSOPII 66P
D1005 D1006 D1007 D1008 D1009 D1010 D1012 D1013 D102 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD200009AF 0DD200009AF 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DD184009AA 0DS113379BA 0DD226239AA 0DD226239AA 0DD226239AA 0DD226239AA 0DR050008AA 0DR050008AA 0DR050008AA KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC RU2M V(1) TP SANKEN RU2M V(1) TP SANKEN KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS184 TP KEC - 85V - 300MA 1SS133 T-72 TP ROHM KOREA DO34 90V KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC KDS226 TP KEC SD05.TC R/TP SEMTECH SOD323 5V 5A 15A SD05.TC R/TP SEMTECH SOD323 5V 5A 15A SD05.TC R/TP SEMTECH SOD323 5V 5A 15A

DESCRIPTION 100UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 220UF MVG 16V 20% R/TP(SMD) SMD 10UF MVG 16V 20% R/TP(SMD) SMD 47UF MVG 16V 20% SMD R/TP 10UF MVG 16V 20% R/TP(SMD) SMD 100UF MVG 16V 20% SMD R/TP 10UF MVG 16V 20% R/TP(SMD) SMD 10UF MVG 16V 20% R/TP(SMD) SMD 10UF MVG 16V 20% R/TP(SMD) SMD 10UF MVG 16V 20% R/TP(SMD) SMD 10UF MVG 16V 20% R/TP(SMD) SMD 1UF 2012 16V 20% R/TP F(Y5V) 1UF 2012 16V 20% R/TP F(Y5V) 10UF MVG 16V 20% R/TP(SMD) SMD 47UF MVG 16V 20% SMD R/TP 220UF MVG 16V 20% R/TP(SMD) SMD 220UF MVG 16V 20% R/TP(SMD) SMD 220UF MV 16V 20% R/TP(SMD) SMD 47UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 10UF MVG 16V 20% R/TP(SMD) SMD 4.7UF MVG 50V 20% SMD R/TP 4.7UF MVG 50V 20% SMD R/TP 10UF MVG 16V 20% R/TP(SMD) SMD 1UF 2012 16V 20% R/TP F(Y5V) 10UF MVG 16V 20% R/TP(SMD) SMD 10UF MVG 25V 20% SMD R/TP 10UF MVG 25V 20% SMD R/TP 10UF MVG 25V 20% SMD R/TP 10UF MVG 25V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 470UF MVG 16V 20% R/TP(SMD) SMD 4.7UF MVG 50V 20% SMD R/TP 470UF MVG 16V 20% R/TP(SMD) SMD 10UF MVG 16V 20% R/TP(SMD) SMD 4.7UF MVG 50V 20% SMD R/TP 470UF MVG 16V 20% R/TP(SMD) SMD 100UF MVG 16V 20% SMD R/TP 47UF MVG,MC 50V 20% SMD TAPPING 100UF MVG 16V 20% SMD R/TP

CAPACITOR

C1000 C1005 C1007 C1009 C1010 C1019 C1022 C103 C1030 C1043 C1046 C1047 C1050 C1051 C1064 C1065 C1066 C1067 C1068 C1069 C1071 C1073 C108 C1082 C1083 C1084 C1085 C1087 C1098 C1099 C1102 C1105 C1107 C1108 C1110 C1115 C1116 C1117 C1117 C1118 C1119 C1120 C1126 0CE477SF6DC 0CE477SF6DC 0CE107SF6DC 0CE107SF6DC 0CE107SF6DC 0CE476SF6DC 0CE107SF6DC 0CE4763F618 0CE476SF6DC 0CE476SF6DC 0CE477SF6DC 0CE476SF6DC 0CE477SF6DC 0CE477SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE477SF6DC 0CE477SF6DC 0CE227SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE477SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE476SF6DC 0CE107SF6DC 0CE107SF6DC 0CE477SF6DC 0CE477DJ618 0CE477SF6DC 0CE227SF6DC 0CE227VF6DC 0CE477SF6DC 0CE477DJ618 0CE227VF6DC 0CE477SF6DC 470UF MVG 16V 20% R/TP(SMD) SMD 470UF MVG 16V 20% R/TP(SMD) SMD 100UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 47UF SRE 16V M FL TP5 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 470UF MVG 16V 20% R/TP(SMD) SMD 47UF MVG 16V 20% SMD R/TP 470UF MVG 16V 20% R/TP(SMD) SMD 470UF MVG 16V 20% R/TP(SMD) SMD 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 470UF MVG 16V 20% R/TP(SMD) SMD 470UF MVG 16V 20% R/TP(SMD) SMD 220UF MVG 16V 20% R/TP(SMD) SMD 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 470UF MVG 16V 20% R/TP(SMD) SMD 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 47UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 100UF MVG 16V 20% SMD R/TP 470UF MVG 16V 20% R/TP(SMD) SMD 470UF STD 35V 20% FL TP 5 470UF MVG 16V 20% R/TP(SMD) SMD 220UF MVG 16V 20% R/TP(SMD) SMD 220UF MV 16V 20% R/TP(SMD) SMD 470UF MVG 16V 20% R/TP(SMD) SMD 470UF STD 35V 20% FL TP 5 220UF MV 16V 20% R/TP(SMD) SMD 470UF MVG 16V 20% R/TP(SMD) SMD

RESISTOR

AR1200 AR1201 AR1202 AR1203 AR1204 AR1205 AR806 AR807 AR808 AR809 AR810 AR811 AR812 AR813 AR814 AR815 AR816 AR817 R230 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001D 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RRZVTA001B 0RD0331HOHM 1 / 16 W 1608 5% R/TP 4P 22 OHM 1 / 16 W 1608 5% R/TP 4P 22 OHM 1 / 16 W 1608 5% R/TP 4P 22 OHM 1 / 16 W 1608 5% R/TP 4P 22 OHM 1 / 16 W 1608 5% R/TP 4P 22 OHM 1 / 16 W 1608 5% R/TP 4P MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% MNR14-E0A-J-510 R OHM 51 OHM 5% 3.3 OHM 1/2 W 5.00% TA52
D1003 D1103 LD101 0DL233309AC 0DL233309AC 0DL200000CA SAM2333 GREEN/RED GREEN:10MCD, RED:6MCD SAM2333 GREEN/RED GREEN:10MCD, RED:6MCD SAM5670(DL-2LRG) BK Y-GREEN -

SWITCH

SW101 SW102 SW103 SW104 SW105 SW106 SW107 SW108 SW800 140-315A 140-315A 140-315A 140-315A 140-315A 140-315A 140-315A 140-315A 6600VR1004A TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V TACT SKHV17910B LG C&D 12V SKHMPW 5P CHIP TACT J-ALPS

- 30 -

LOCA. NO

PART NO

DESCRIPTION

LOCA. NO L126 L202

PART NO 6210VC0005A 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200JB8010L 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200JB8010L 6200J000013 6200JB8010L 6200J000013 6200J000013 6200JB8010L 6200JB8010L 6200J000013 6200J000013 6212AB2845A 166-E02F 156-A02M 6212AB2844A
DESCRIPTION BK2125 HS 750 2X1.25X0.85MM R/TP MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-201209-1000L-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-201209-1000L-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-201209-1000L-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-201209-1000L-N2 MAG LAYERS MLB-201209-1000L-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS RESONATOR,CRYSTALABLS-27.000MHZ RESONATOR,CERAMICCSBLA500KECZF09-B0 RESONATOR,CRYSTALHC49U 18.432MHZ RESONATOR,CRYSTALABLS-19.6608MHZ

FILTER & CRYSTAL

L100 L1004 L1005 L1006 L1007 L1009 L101 L1010 L1011 L1012 L1013 L1014 L1015 L1016 L1017 L1018 L1019 L1020 L1021 L1022 L1023 L1024 L1025 L110 L1105 L1106 L1107 L1108 L111 L1125 L1126 L1127 L1128 L1129 L1130 L114 L115 L119 L120 L1204 L1205 L1206 L1207 L1208 L1209 L121 L122 L123 L124 L125 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200JB8010L 6200JB8010L 6200JB8010L 6200JB8010L 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6200J000013 6210VC0005A 6210VC0005A 6210VC0005A 6210VC0005A MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-201209-1000L-N2 MAG LAYERS MLB-201209-1000L-N2 MAG LAYERS MLB-201209-1000L-N2 MAG LAYERS MLB-201209-1000L-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS MLB-321611-0500P-N2 MAG LAYERS BK2125 HS 750 2X1.25X0.85MM R/TP BK2125 HS 750 2X1.25X0.85MM R/TP BK2125 HS 750 2X1.25X0.85MM R/TP BK2125 HS 750 2X1.25X0.85MM R/TP