BACK COVER FOR WIRE ARRANGEMENT

Plasma TV models

42/50PG25**, 42/50PG35**, 42PG65**, 50PG45** 50PG65**, 50PG75**
Connect the cables as necessary. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section.
Install the C A B L E M A N A G E M E N T C L I P as shown.

CABLE MANAGEMENT CLIP

Fix the C a b l e H o l d e r as shown and bundle the cables.
42/50PG25**, 42/50PG35**, 50PG45**
How to remove the cable management clip Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward. For the 42PG65** model, press the center of the C A B L E M A N A G E M E N T C L I P and then lift up it.
Separate CABLE MANAGEMENT from TV by pressing two latches.

42PG65**

50PG65**/50PG75**

LCD TV models

Connect the cables as necessary. To connect additional equipment, see the External Equipment Setup section of the manual.
Open the C A B L E M A N A G E M E N T C L I P as shown and manage the cables.
Fit the C A B L E M A N A G E M E N T C L I P as shown.
G Do not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.
The TV can be installed in various ways such as on a wall or on a desktop etc. The TV is designed to be mounted horizontally.

EARTHING

Ensure that you connect the earth wire to prevent possible electric shock. Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.

Power Supply

Circuit breaker
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4 (10cm) all around the TV.

4 inches

WALL MOUNT: HORIZONTAL INSTALLATION
For adequate ventilation allow a clearance of 4 (10cm) all around the TV. We recommend that you use a wall mounting bracket of LG brand when mounting the TV to a wall.
4 inches 4 inches 4 inches 4 inches
Not using the desk-type stand
When installing the wall-mounted unit, use the protection cover for desk-type stand installation. Insert the P R O T E C T I O N C O V E R into the TV until clicking sound. < PLASMA TV >

< LCD TV >

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

ANTENNA CONNECTION

For optimum picture quality, adjust antenna direction. I An antenna cable and converter are not supplied.

Wall Antenna Socket

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

RGB IN HDMI IN

VIDEO AUDIO

VARIABLE AUDIO OUT

1(DVI)

RS-232C IN (CONTROL & SERVICE)
The TV can receive video and audio signals simultaneously when using a HDMI cable. If the DVD does not support Auto HDMI, you must set the output resolution appropriately.

VCR SETUP

When connecting with a RF Cable

MI/DVI IN

ANT OUT S-VIDEO VIDEO
To avoid picture noise (interference), allow adequate distance between the VCR and TV. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.

ANT IN OUTPUT SWITCH

Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
Connect the antenna cable to the A N T I N socket of the VCR.
Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.

Wall Jack

IN OPTICAL DIGITAL VI) AUDIO OUT
Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV1 input source using the I N P U T button on the remote control. If connected to A V 2 Euro scart socket, select AV2 input source.

B IN (PC)

V Connect the A U D I O/V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV3 input source using the I N P U T button on the remote control.
Connecting with a RCA cable

232C IN L & SERVICE)

VIDEO S-VIDEO
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the TV.
Connect the S-VIDEO output of the VCR to the S VIDEO input on the TV. The picture quality is improved; compared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the AUDIO input jacks on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select AV3 input source using the I N P U T button on the remote control.
If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.

DIGITAL AUDIO OUT SETUP

- Sending the TVs audio signal to external audio equipment via the Digital Audio Output (Optical) port.
Connect one end of an optical cable to the TV Digital Audio (Optical) Output port.

INFO i GUIDE

FAV VOL PR
Press the MENU button and then select the SCREEN menu.

button to

SETUPO Auto Config. PICTUREO Manual Config. AUDIOO XGA Mode Aspect Ratio TIMEO Reset OPTIONO SCREEN
Press the G button and then Auto Config.

or E button to select

Move MENU Prev.
Press the G button to start Auto Config.
When Auto Config. has finished, OK will be shown on screen. If the position of the image is still not correct, try Auto adjustment again.
Auto Config. Manual Config. XGA Mode Aspect Ratio Reset

To Set

If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Manual Config.
Press the EXIT button to return to normal TV viewing.
BACK EXIT MENU INFO i GUIDE
Adjustment for screen Phase, Clock, Position
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually.

FAV PR

To correct the screen size, adjust Clock. This function works in the following mode : RGB[PC]. Clock This function is to minimize any vertical bars or stripes visible on the screen background the horizontal screen size will also change. Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
Press the G button and then D or E button to select Manual Config.
Press the G button and then D or E button to select Phase, Clock, H-Position or V-Position.
Press the F or G button to make appropriate adjustments.
Phase Clock H-Position V-Position

BACK EXIT

Selecting Wide XGA mode
To view a normal picture, match the resolution of RGB mode and selection of XGA mode. This function works in the following mode: RGB[PC] mode
Press the MENU button and then D or E button to select the SCREEN menu.
Press the G button and then D or E button to select XGA Mode.
Press the G button and then D or E button to select the desired XGA resolution.

1024 X X X X 768

Initializing (Reset to original factory settings)
This function operates in current mode. To initialize the adjusted value
It is not possible to use ISM Method and Low power in LCD TV models. It is possible to use Power Indicator in LCD TV models only.
Press the MENU button and then select the OPTION menu.
Press the G button and then D or E button to select Factory Mode.
SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Input Label OPTION G SIMPLINK SCREENO Power Indicator Factory Mode
Press the G button and then D or E button to select Factory Reset.
Language Country Lock System Parental Control Input Label SIMPLINK Power Indicator Factory Mode Set ID 1 Factory Reset OK ISM Method Normal

Information Friends Mona The Vampire 14:00 15:20 Record 3 Apr 14 : Apr
Miss Gottos Haunted House/Cry Of the Swamp; Miss Gotto Wail Moves into a new house, and theres mysterious wail enanating from the local sweep Of The Swamp; Miss Gotto Wail Moves into a new house, and theres a mysterious wail enanating from the local sweep Of The Swamp; Miss Gotto Wail Moves into a new house, and theres a mysterious wail enanating from the local sweep Of The Swamp; Miss Gotto Wail Moves into a new house, and theres a mysterious wail enanating from the local sweep Of The Swamp

Info. Exit

Manual Record
Button Function in Record/Remind Setting Mode
- This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT terminal, using a SCART cable. Remote Control Buttons Function YELLOW Change to Guide mode Save Timer Record/Remind Select Type, Service, Date or Start/End time F or G Function setting D or E
Manual Record 14 : Apr Type

Programme 07 BBC THREE

Date 28 Feb

Start 22 : 35

End 23 : 00

Record

Cancel
Button Function in Timer List Mode
Remote Control Buttons YELLOW GREEN RED BLUE D or E Function Add new Manual Timer setting mode Enter Timer list editing mode Delete the selected item Change to Guide mode Select Timer list

Schedule List

1 BBC TWO 08:00 ~ 09:00 Fri 23 Feb

14 : Apr

Title Friends Newsnight review Road trip BBC News Carrott Gold Frineds
Programme 01 BBC TWO 02 BBC TWO 02 BBC TWO 07 BBC THREE 01 BBC ONE 01 BBC TWO
Date Wed 23 Feb Fri 25 Feb Sat 26 Feb Fri 25 Feb Mon 28 Feb Wed 28 Feb
Time 08:00 23:00 00:35 12:00 22:35 08:00

Delete

VCR SIMPLINK TEXT RATIO I/II
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; : 9, O r i g i n a l, 4 : 3, : 9, Z o o m 1 / 2 and J u s t S c a n (Only 32LG59**, 37/42/47/52LG55**, 32/37/42/47/52LG75**, 42LG75**, 50PG45**, 50PG75**). It is possible to use Just Scan in DTV mode only. If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.

VOL BACK EXIT MENU INFO i GUIDE

Vivid Standard

Cinema User 1/2
Press the MENU button and then D or E button to select the PICTURE menu. Press the G button and then D or E button to select Picture Mode. Press the G button and then D or E button to select Intelligent Sensor (32/37/42/47/52LG5***, 32/37/42/47/52LG75** only), Vivid, Standard, Cinema, User 1 or User 2. Press the EXIT button to return to normal TV viewing. Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the Picture Mode menu based on the programme category. Intelligent Sensor (32/37/42/47/52LG5***, 32/37/42/47/52LG75** only), Vivid, Standard and Cinema are programmed for optimum picture reproduction at the factory and cannot be changed.
SETUPO Picture Mode G Colour Temperature TIMEO Advanced Picture Reset Demo

AUDIOO OPTIONO SCREENO

Picture Mode Colour Temperature Advanced Picture Reset Demo
Intelligent Sensor Vivid Standard Cinema User 1 User 2
Auto Colour Tone Control (Warm/Medium/Cool)
To initialize values (reset to default settings), select the Cool option. Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red or set to cool to see less intense colours with more blue.
Its available to use this function in User mode.
Press the MENU button and then D or E button to select the PICTURE menu.
Press the G button and then D or E button to select Colour Temperature.
Press the G button and then D or E button to select either Cool, Medium, Warm or User.

Cool Medium Warm User

MANUAL PICTURE ADJUSTMENT

Picture Mode-User option

It is possible to use Back Light function in LCD TV models only.
Press the G button and then D or E button to select Picture Mode.
Press the G button and then 1 or User 2.

button to select User

Press the G button and then D or E button to select the desired picture option (Back Light, Contrast, Brightness, Colour, Sharpness and Tint).
Press the G button and then F or G button to make appropriate adjustments.

User 1

Back Light Contrast Brightness Colour Sharpness Tint

ADVANCED - BLACK(DARKNESS) LEVEL
When you view a film this function adjusts the TV to best picture quality. This function works in the following mode: AV (NTSC-M), S-Video (NTSC-M) or HDMI. Press the MENU button and then D or E button to select the PICTURE menu.
Cinema Off Black Level Low
Press the G button and then D or E button to select Advanced. Press the G button and then D or E button to select Black Level. Press the F or G button to select Auto, Low or High.
Picture Mode Colour Temperature Advanced Picture Reset Demo Cinema

F G On

Black Level Low
L o w : The reflection of the screen gets darker. H i g h : The reflection of the screen gets brighter.
A Auto Realizing the Black Level of the screen and set it to High or Low automatically.

ADVANCED - TRUMOTION

(37/42/47/52LG75** only)
It is used for the best picture quality without any motion blur or judder when you enter a quick image or Film Source. This feature is disable in RGB-PC, HDMI-PC mode.
Advanced Picture Reset OPTIONO Demo SCREENO TruMotion Demo
Press the G button and then D or E button to select Advanced.
Press the G button and then D or E button to select TruMotion.
Picture Mode Colour Temperature Advanced Picture Reset Demo TruMotion Demo
Cinema Off Black Level Low TruMotion High
, Press the F or G button to select Off, Low or High.
Low : Provides smooth picture movement. Use this setting for standard use. High : Provides smoother picture movement. Off : Use this setting when High and Low setting result in noise.
Advanced Picture Reset Demo TruMotion Demo
Cinema Off Black Level Low TruMotion

F G High

If you enable TruMotion, noise may appear on the screen. If this occurs, set TruMotion to Off.

PICTURE RESET

Returns to the default factory setting for Picture Mode, Colour, Temperature, XD and Advanced.
Press the MENU button and then D or E button to select the PICTURE menu. Press the G button and then D or E button to select Picture Reset. Press the G button to initialize the adjusted value.

TRUMOTION DEMO

Use it to see the difference between TruMotion Demo on and TruMotion Demo off. Its not available to use this function in RGB/HDMI-PC mode.
Press the MENU button and then D or E button to select the PICTURE menu. Press the G button and then D or E button to select. TruMotion Demo. Press the G button to begin TruMotion Demo. To stop TruMotion Demo, press the E X I T button.

TruMotion Demo

TruMotion On

Press the D or E button and then, O K button to select your desired language.
* If you want to change Language selection
Press the MENU button and then D or E button to select the OPTION menu. Press the G button and then D or E button to select Language. Press the G button and then D or E button to select Menu. Press the F or G button to select your desired language. The menus can be shown on the screen in the selected language. Press the O K button. Press the EXIT button to return to normal TV viewing.
If you do not finish the set-up Installation Guide by pressing EXIT or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on.

SIMPLINK TEXT RATIO I/II

LANGUAGE SELECTION (IN DIGITAL MODE ONLY)
The Audio function allows selection of a preferred language.If audio data in a selected language is not broadcast, the default language audio will be played. Use the Subtitle function when two or more subtitle languages are broadcast. If subtitle data in a selected language is not broadcast, the default language subtitle will be displayed.
Press the MENU button and then D or E button to select the OPTION menu. Press the G button and then D or E button to select Language. Press the G button and then D or E button to select Audio, Subtitle or Subtitle Hard of hearing. Press the G button and then F or G button to select your desired language. Press the EXIT button to return to normal TV viewing.
< Audio Language Selection > G When two or more audio languages are broadcast, you can select the audio language with the I/II button on the remote control. G Press the D or E button to select an audio language. G Press the F or G button to select L+R, L+L or R+R. < Subtitle Language Selection > G When two or more subtitle languages are broadcast, you can select the subtitle language with the SUBTITLE button on the remote control. G Press the D or E button to select a subtitle language.
Audio Language OSD Information Display N.A Status Not Available Audio for Visual Impaired Dolby Digital Audio HE-AAC Audio Dolby Digital Plus Audio
Subtitle Language OSD Information Display N.A
Status Not Available Teletext Subtitle Subtitle for Hard of Hearing
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider. - When you select supplementary Audio (Audio for Visual/Hearing Impaired) the TV may output a part of the Main audio.

CLOCK SETUP

The clock is set automatically when receiving a digital signal. (You can set the clock manually only if the TV has no DTV signal.) You must set the time correctly before using on/off timer function.

Press the MENU button and then select the TIME menu.

Press the Clock.

button and then
Press the G button and then F or G button to select either the year, date or time option.
Clock Off Time On Time Auto Sleep Time Zone
Once selected, use the D or E button to set the year, date, and time options.

Time Date Year

14 Apr 2007
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby at a preset time. Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. The Off time function overrides the On timer function if both are set to the same time. The TV must be in standby mode for the On timer to work.
Press the G button and then D or E button to select Off Time/On Time. Press the G button and then D or E button to select On. To cancel On/Off Time function, select Off.
Press the G button and then D or E button to set the hour. Press the G button and then D or E button to set the minutes. For On Time function only Programme: Press the G button and then D or E button to select TV, DTV or Radio in the Mode menu. And then, Press the G button and then D or E button to select the programme. Volume: Press the G button and then D or E button to adjust volume level at switch-on.

Volume Mode PR

AUTO SHUT-OFF SETTING
If the TV is switched on and there is no input signal, it will switch off automatically after 10 minutes.
Press the G button and then Auto Sleep.

TIME ZONE SETUP

TV time is set Paris GMT +1 when time is set automatically by a digital signal. You can not select another time zone.
Press the G button and then D or E button to select Time Zone. It will be displayed Paris GMT +1.

SLEEP TIMER SETTING

You do not have to remember to switch the TV off before you go to sleep. The sleep timer automatically switches the TV to standby after the preset time has elapsed.

Time Zone Paris GMT+1

Press the SLEEP button repeatedly to select the number of minutes. The display - - - Min will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.

b c d e

When the number of minutes required is displayed on the screen, the timer begins to count down from the number of minutes selected. To view the remaining sleep time, press the SLEEP button once. To cancel the sleep time, repeatedly press the SLEEP button until the display - - - Min appears. When you switch the TV off, the preset sleep time is cancelled.
SET PASSWORD & LOCK SYSTEM
Enter the password, press 0, 0, 0, 0 on the remote control handset.
Press the MENU button and then select the OPTION menu. Press the G button and then Lock System. Press the On.

PARENTAL CONTROL / RATING

or G button to select

To set the password Press the E button and then use the NUMBER buttons to input a 4-digit password. Be sure to remember this number! Re-enter new password for confirm. If you forget your password, press 7, 7, 7, 7 on the remote control handset.

Set Password New Confirm

INPUT D/A POWER MODE TV DVD BRIGHT VCR BACK INFO i GUIDE

PARENTAL CONTROL

This function operates according to information from the broadcasting station. Therefore if the signal has incorrect information, this function does not operate. This allows you to set up blocking schemes to block specific channels and ratings.

TV/RADIO INPUT

A password is required to gain access to this menu. This TV is programmed to remember which option it was last set to even if you switch the TV off.
Press the MENU button and then D or E button to select the OPTION menu. Press the G button and then D or E button to select Parental Control. Then, press the G button to enter the password as requested. The TV is set up with the initial password 0-0-0-0. Press the G button and then D or E button to select Parental Guidance or Key Lock. Parental Guidance (In Digital Mode only) Prevents children from watching certain adults TV programmes, according to the ratings limit set. Key Lock The TV can be set so that the remote control is required to control it. This feature can be used to prevent unauthorized viewing.

Parental Guidance

Key Lock
Press the F or G button to make appropriate adjustments. Press the EXIT button to return to normal TV viewing.
In Key Lock On, if the TV is turned off, press the r / I, INPUT, PR INPUT, D/A TV, PR + or - or NUMBER buttons on the remote control.
button on the TV or POWER,
With the Key Lock On, the display Key Lock On appears on the screen if any button on the front panel is pressed while viewing the TV.
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.

A HOLD

Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive. To continue press this button again.

TROUBLESHOOTING

The TV does not operate properly. Check to see if there is any object between the TV and the remote control causing an obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
The remote control does not work
Power is suddenly turned off
Is the sleep timer set? A Check the power control settings. Has the Power supply been interrupted. A Is Auto sleep activated on this station?
The video function does not work. Check whether the TV is switched on. Try another channel. The problem may be with the broadcast. A Is the power cord inserted correctly into the mains? A Check your antenna direction and/or location. A Test the mains outlet by plugging another TV into the same outlet.

No picture &No sound

Picture appears slowly after switching on
This is normal, the image is muted during the TV startup process. Please contact your service centre, if the picture has not appeared after five minutes.
No or poor colour or poor picture
Adjust Colour in menu option. Allow a sufficient distance between the TV and the VCR. A Try another channel. The problem may be with the broadcast. A Are the video cables installed properly? A Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels Lines or streaks in pictures No picture when connecting HDMI
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station. Station signal is weak, reposition the antenna to receive weaker stations. A Check for sources of possible interference.

EXTERNAL CONTROL DEVICE SETUP

RS-232C Setup

Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the TVs functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. Note: RS-232C connection cables are not supplied with the TV.
Type of Connector; D-Sub 9-Pin Male
No. 9 Pin Name No connection RXD (Receive data) TXD (Transmit data) DTR (DTE side ready) GND DSR (DCE side ready) RTS (Ready to send) CTS (Clear to send) No Connection

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable) PC RXD TXD GND DTR DSR RTS CTS 8 D-Sub 9 TV 7 D-Sub 9 TXD RXD GND DSR DTR CTS RTS RXD TXD GND DTR DSR RTS CTS 3-Wire Configurations(Not standard) PC 8 D-Sub 9 TV 8 D-Sub 9 TXD RXD GND DTR DSR RTS CTS

BACK MENU INFO i GUIDE

Set ID
Use this function to specify a set ID number. Refer to Real Data Mapping. G p.102 It is not possible to use ISM Method and Low power in LCD TV models. It is possible to use Power Indicator in LCD TV models only.

1 APPENDIX

Press the G button and then D or E button to select Set ID.
Press the F or G button to adjust Set ID to choose the desired TV ID number. The adjustment range of SET ID is 1~ 99.
Factory Reset ISM Method Normal Low Power Off

Communication Parameters

Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None
Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable.

Command Reference List

COMMAND COMMAND DATA (Hexadecimal) 01. Power 02. Aspect Ratio 03. Screen Mute 04. Volume Mute 05. Volume Control 06. Contrast 07 Brightness. 08. Colour 09. Tint 10. Sharpness 1 OSD Select 1. 1 Remote control lock mode 2. 1 Balance 3. 1 Colour Temperature 4. 1 Red Adjustment 5. 1 Green Adjustment 6. 1. Blue Adjustment Abnormal Status 8. 19. ISM Method 20. Low Power 21. Auto Configure 22. Channel Select Command 23. Send IR Code 24. Back Light 25. Input select (Main) k k k k k k k k k k k k k k k k k k j j j m m m x a c d e f g h i j k l m t u v w $ z p q u a c g b 00 ~ 01 Refer to p. ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ a Refer to p. ~ Refer to p. 103 Key Code 0 ~ 64 Refer to p. 103

(Only 37/42/47/52LG5***, 32/37/42/47/52LG75**, 42LG75**, 50PG45**, 50PG75**)
06. Contrast (Command: k g)
G To adjust screen contrast.
You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to Real data mapping 1. See page 102. Ack [g][ ][Set ID][ ][OK][Data][x]
[c][ ][Set ID][ ][OK][Data][x] * Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. 03. Screen Mute (Command: k d)
G To select screen mute on/off.
[k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) 01 : Screen mute on (Picture off)
07. Brightness (Command: k h) G To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to Real data mapping 1. See page 102. Ack [h][ ][Set ID][ ][OK][Data][x]
[d][ ][Set ID][ ][OK][Data][x]
08. Colour (Command: k i)
G To adjust the screen colour.
1 2. Remote control lock mode ( C o m m a n d : k m )
G To lock the front panel controls on the TV and remote
You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to Real data mapping 1. See page 102. Ack [i][ ][Set ID][ ][OK][Data][x]
control. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00 : Lock off Ack 01 : Lock on
[m][ ][Set ID][ ][OK][Data][x] * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released.
09. Tint (Command: k j) G To adjust the screen tint. You can also adjust tint in the PICTURE menu.
13. Balance (Command: k t)

G To adjust balance.

[k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 ~ Green : 64 * Refer to Real data mapping 1. See page 102. Ack [j][ ][Set ID][ ][OK][Data][x]
You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to Real data mapping 1. See page 102. Ack [t][ ][Set ID][ ][OK][Data][x]
10. Sharpness (Command: k k) G To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 * Refer to Real data mapping 1. See page 102. Ack [k][ ][Set ID][ ][OK][Data][x]
14. Colour Temperature (Command: k u)
G To adjust colour temperature. You can also adjust Colour
Temperature in the PICTURE menu. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 00: Cool Ack 01: Medium 02: Warm 03: User
[u][ ][Set ID][ ][OK][Data][x] 11. OSD Select (Command: k l)
G To select OSD (On Screen Display) on/off when con-
15. Red Adjustment (Command: k v)

G To adjust red in colour temperature.

trolling remotely.

[k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off Ack 01 : OSD on
Transmission [k][v][ ][Set ID][ ][Data][Cr]
Data Min : 00 ~ Max : 50 * Refer to Real data mapping 2. Ack [v][ ][Set ID][ ][OK][Data][x]
[l][ ][Set ID][ ][OK][Data][x]
16. Green Adjustment (Command: k w)
G To adjust green in colour temperature.
19. ISM Method (Command: j p)
G To control the ISM method. You can also adjust ISM
[k][w][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 50 * Refer to Real data mapping 2. Ack [w][ ][Set ID][ ][OK][Data][x]
Method in OPTION menu. It is not possible to use this function with LCD TV models. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 00: Normal 01: White wash 02: Orbiter 03: Inversion
[p][ ][Set ID][ ][OK/NG][Data][x] 17. Blue Adjustment (Command: k $) G To adjust blue in colour temperature. Transmission [k][$][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 50 * Refer to Real data mapping 2. Ack [$][ ][Set ID][ ][OK][Data][x] 20. Low Power (Command: j q)
G To reduce the power consumption of the TV. You can
also adjust Low Power in OPTION menu. It is not possible to use this function with LCD TV models. Transmission [j][q][ ][Set ID][ ][Data][ ][Cr] Data 00 : Off 01 : On Ack [q][ ][Set ID][ ][OK/NG][Data][x]
18. Abnormal State (Command: k z)
G To recognize an abnormal state.
[k][z][ ][Set ID][ ][FF][ ][Cr] Data FF : Read Ack [z][ ][Set ID][ ][OK][Data][x] Data 00: Normal (Power on and signal exist) 01: No signal (Power on) 02: Turn the TV off by remote control 03: Turn the TV off by sleep time function 04: Turn the TV off by RS-232C function 05: 5V down 06: AC down 07: Turn the TV off by Fan Alarm function 08: Turn the TV off by Off time function 09: Turn the TV off by Auto sleep function a: Turn the TV off by AV Board detect * This function is read only.
* Real data mapping : Step 0 A : Step 10 (Set ID 10) F : Step 15 (Set ID 15) 10 : Step 16 (Set ID 16) 64 : Step 100 6E : Step 73 : Step 74 : Step C7: Step 199 FE : Step 254 FF : Step 255
* Real data mapping :-: -:-:0 4E : +38 4F : +: +40
21. Auto Configure (Command: j u)
G To adjust picture position and minimize image shaking