ENGLISH

LCD TV PLASMA TV OWNERS MANUAL
LCD TV MODELS L G 3 0* * L S 4 D* L S 4 D* L G 5 0* * L G 3 0* * L G 5 0* * L G 3 0* * L G 5 0* * L G 3 0* * L G 5 0* * L G 3 0* * L G 5 0* * L G 3 0* * PLASMA TV MODELS P G 1 0* * P G 1 0* * P G 2 0* * P G 2 0* * P G 3 0* * P G 3 0* * P G 3 0* *
Please read this manual carefully before operating your TV. Retain it for future reference. Record model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring service.
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 5499: 22LS4D-ZD 5107: 42PG1000-ZA 5107: 42PG2000-ZA 5109: 42PG3000-ZA 5498: 60PG3000-ZA 5088: 19LG3000-ZA 5080: 26LG3000-ZA 5087: 37LG3000-ZA 5085: 32LG5000-ZA 5083: 42LG5000-ZA 5081: 52LG5000-ZA 5386: 47LG5010-ZD 5388: 37LG5010-ZD 5390: 52LG5020-ZB 5392: 42LG5020-ZB 5394: 32LG5020-ZB 5396: 47LG5030-ZE 5398: 37LG5030-ZE 5507: 19LS4D-ZD 5106: 50PG1000-ZA 5106: 50PG2000-ZA 5108: 50PG3000-ZA 5090: 22LG3000-ZA 5089: 32LG3000-ZA 5086: 42LG3000-ZA 5084: 37LG5000-ZA 5082: 47LG5000-ZA 5385: 52LG5010-ZD 5387: 42LG5010-ZD 5389: 32LG5010-ZD 5391: 47LG5020-ZB 5393: 37LG5020-ZB 5395: 52LG5030-ZE 5397: 42LG5030-ZE 5399: 32LG5030-ZE
This feature is not available for all models.

(Except for 19/22LS4D*)

ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV. Image shown may differ from your TV.
TV D/A TV /RAD IO TE XT PO W ER IN PU T MU TE

Q.VIE W

IN FO i

RA TIO

Owner's Manual

VO L RAT

Owners manual

E RE XIT TU RN

GU IDE
IO SLE EP TIM E HO LD RE VE AL

IND EX

UPDA TE

Owners Manual

Batteries

Remote Control

Polishing Cloth

Power Cord

Polishing cloth for use on the screen.

Protection Cover

Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Do not use excessive force. This may cause scratching or discolouration.

PLASMA TV models

Bolts for stand assembly (Refer to p.1 1) (Only 42PG10**, 42PG20**, 42PG30**)
Cable Holder (42PG10**, 42PG20**, 42PG30**: 1EA, 50PG10**, 50PG20**, 50/60PG30**: 2EA)
Cable management clip (Only 42/50PG10**)
Cable management clip (Only 42/50PG20**, 42/50/60PG30**)

LCD TV models

x4 Cable management clip (Only 19/22LG30**)
Bolts for stand assembly (Refer to p.10) (Only 32/37/42LG50**, 26/32/37/42LG30**)
1-screw for stand fixing (Refer to p.5) (Only 26/32/42LG30**, 32/42LG50**)
Cable management clip (Only 19/22LS4D*)

CONTENTS

PREPARATION
Front Panel Controls. 4 Back Panel Information. 7 Stand Installation. 10 Detaching Stand. 13 Please set it up carefully so the product does not fall over. 14 Back Cover for Wire Arrangement. 15 Positioning Your Display. Location. Kensington Security System. Desktop Pedestal Installation. 19 Wall Mount: Horizontal Installation. 19 Antenna Connection. 20
Software Update. 52 Diagnostics. 53 CI Information. 54 Selecting the Programme Table. 55 SIMPLINK. 56 Input Label. 58 AV Mode. 59
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)
Switch On/ Off EPG. 60 Select Programme. 60 Button Function in NOW/NEXT Guide Mode. 61 Button Function in 8 Day Guide Mode. 61 Button Function in Date Change Mode. 61 Button Function in Extended Description Box. 62 Button Function in Record/Remind Setting Mode. 62 Button Function in Schedule List Mode. 62

RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) SERVICE ONLY PORT Audio/Video Input (Except for 42/50PG10**) Connect audio/video output from an external device to these jacks. S-Video Input (Except for 42/50PG10**) Connect S-Video out from an S-VIDEO device.

PCMCIA CARD SLOT

LCD TV Models: 19/22/26/32/37/42LG30** 32/37/42/47/52LG50**

HDMI IN 3

PCMCIS CARD SLOT
DIGITAL AUDIO OUT OPTICAL Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work. Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks.

COMPONENT IN

USB IN SERVICE ONLY
AUDIO IN OPTICAL DIGITAL (RGB/DVI) AUDIO OUT

HDMI/DVI IN 2

RGB IN (PC)
1(DVI) RS-232C IN (CONTROL & SERVICE)

ANTENNA IN

Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. RGB/DVI Audio Input Connect the audio from a PC or DTV.
Component Input Connect a component video/audio device to these jacks. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) Audio/Video Input Connect audio/video output from an external device to these jacks. S-Video Input Connect S-Video out from an S-VIDEO device. Headphone Socket Connect the headphone plug to this socket. SERVICE ONLY PORT
HDMI Input Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
RGB Input Connect the output from a PC. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC.

AUDIO IN (RGB/DVI)

RS-232C IN (CONTROL & SERVICE)

RGB (PC) IN

COMPONENT IN VIDEO AUDIO

Power Cord Socket This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power. HDMI Input Connect a HDMI signal to HDMI IN. Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable. RGB/DVI Audio Input Connect the audio from a PC or DTV. Antenna Input Connect RF antenna to this jack. PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.)
Euro Scart Socket (AV1/AV2) Connect scart socket input or output from an external device to these jacks. RS-232C IN (CONTROL & SERVICE) PORT Connect to the RS-232C port on a PC. Component Input Connect a component video/audio device to these jacks. RGB Input Connect the output from a PC. SERVICE ONLY PORT

STAND INSTALLATION

(LCD TV Models: 26/32/37/42LG30**, 32/37/42LG50**)
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Assemble the TV as shown.
Assemble the parts of the S t a n d B o d y with the C o v e r B a s e of the TV.
Fix the 4 bolts securely using the holes in the back of the TV.

Stand Body

Cover Base

(Only 19/22LG30**)

Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the parts of the S T A N D B O D Y with C O V E R B A S E of the TV. Insert the S T A N D B O D Y into a C O V E R B A S E until clicking sound. Assemble the TV as shown.
(Only 42PG10**, 42PG20**, 42PG30**)
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage. Assemble the TV as shown. Fix the 4 bolts securely using the holes in the back of the TV.
STAND INSTALLATION (Only 19/22LS4D*)
Image shown may differ from your TV. Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
Insert the S t a n d B o d y into the TV until clicking sound.
Hold the H i n g e B o d y and bend it upward.

Hinge Body

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
Connect the RGB output of the PC to the R G B I N ( P C ) jack on the TV. Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. Turn on the PC and the TV
Select R G B input source using the INPUT button on the remote control.

RGB OUTPUT

Connect the DVI output of the PC to the H D M I / D V I I N, H D M I / D V I I N 1 ( D V I ) or H D M I / D V I I N 1 jack on the TV. Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV. Turn on the PC and the TV. Select HDMI/DVI or HDMI 1 input source using the I N P U T button on the remote control.
enjoy vivid picture and sound, connect a PC to the TV. G Avoid keeping a fixed image on the TVs screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the TV; change the resolution. G There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card. synchronization input waveform for G The Horizontal and Vertical frequencies are separate. G Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.

G Connect

the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV). G If using a sound card, adjust PC sound as required. G This TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV. G DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionality. G If the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV. G If the graphic card on the PC does output analogue and digital RGB simultaneously, switch the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.) G DOS mode may not work depending on the video card if you use a HDMI to DVI cable. G If you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.

INPUT External input mode rotate in regular sequence. Switches the TV on from standby. TV/RAD Selects Radio or TV channel in digital mode.

Q.MENU

GUIDE Shows programme schedule. INFO i Shows the present screen information.
TELETEXT These buttons are used for teletext. BUTTONS For further details, see the Teletext section. AV MODE It helps you select and set images and sounds when connecting AV devices.
0~9 number Selects a programme. button Selects numbered items in a menu.

RETURN

LIST Displays the programme table. Q.VIEW Returns to the previously viewed programme.

MARK FAV

MENU Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu. Q.MENU Select the desired quick menu source.

SUBTITLE

THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left the system settings to your preference.

Right)

RETURN(EXIT) Allows the user to move back one step in an interactive application, EPG or other user interaction function. RATIO Selects your desired picture format.
VOLUME UP Adjusts the volume. /DOWN FAV Displays the selected favourite programme. * No function MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN Coloured These buttons are used for teletext (on T E L E T E X T modbuttons els only) or P r o g r a m m e e d i t. SUBTITLE Recalls your preferred subtitle in digital mode. SIMPLINK Controls simplink. control buttons
MODE Selects the remote operating modes. POWER Switches the TV on from standby or off to standby.
INPUT External input mode rotate in regular sequence. Switches the TV on from standby. TV/RAD Selects Radio, TV, DTV channel. RATIO Selects your desired picture format. Q. MENU Select the desired quick menu source. MENU Selects a menu. Clears all on-screen displays and returns to TV viewing from any menu. GUIDE Shows programme schedule. THUMBSTICK Allows you to navigate the on-screen menus and adjust (Up/Down/Left the system settings to your preference. Right)
RETURN(EXIT) Allows the user to move back one step in an interactive application, EPG or other user interaction function. INFO i Shows the present screen information. AV MODE It helps you select and set images and sounds when connecting AV devices. Coloured These buttons are used for teletext (on T E L E T E X T buttons models only) , P r o g r a m m e e d i t. TELETEXT These buttons are used for teletext. BUTTONS For further details, see the Teletext section. SUBTITLE Recalls your preferred subtitle in digital mode.
See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.
VOLUME UP Adjusts the volume. /DOWN FAV Displays the selected favourite programme. MUTE Switches the sound on or off. Programme Selects a programme. UP/DOWN PAGE Move from one full set of screen information to the next UP/DOWN one. 0~9 number Selects a programme. button Selects numbered items in a menu. LIST Displays the programme table. Q.VIEW Returns to the previously viewed programme.

SIMPLINK Controls simplink. control buttons

TURNING ON THE TV

- When your TV is turned on, you will be able to use its features.
Firstly, connect the power cord correctly. At this stage, the TV switches to standby mode.
In standby mode to turn TV on, press the r / I, INPUT or P (or PR D E) button on the TV or press the POWER, INPUT, D/A, P (or (PR + - or P + -)) or NUMBER button on the remote control and the TV will switch on.
Initializing setup If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the Language, Select Mode, Country, Time Zone, Auto programme tuning.
Note: a. It will automatically disappear after approx. 40 seconds unless a button is pressed. b. Press the RETURN button to change the current OSD to the previous OSD. c. For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on the DTV broadcasting environment. d. "Home mode is the optimal setting for home environments, and is the TV's default mode. e. "In Store" mode is the optimal setting for store environments. If a user modifies image quality data, In Store mode initializes the product to the image quality set by us after a certain period of time. f. The mode (Home, In Store) can be changed by executing Factory Reset in the OPTION menu.

PROGRAMME SELECTION

Press the P (or (PR + - or P + -)) or NUMBER buttons to select a programme number.

VOLUME ADJUSTMENT

Press the VOL + - (or + -) button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE, VOL + - (or

+ -), or I/II button.

ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. SETUP

Move OK

Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics CI Information
Aspect Ratio Picture Mode : 16:9 : Vivid Backlight Contrast Brightness Sharpness Colour Tint
Auto Volume Balance Sound Mode : Off 0 : Standard 120Hz 200Hz 500Hz 1.2KHz 3KHz

OPTION

+ + + + +
Clock Off Time On Time Sleep Timer Auto Sleep Time Zone
Menu Language Audio Language Subtitle Language Hard of Hearing( Country Input Label SIMPLINK Key Lock
: Off : Off : Off : Off : Canary GMT
: English : English : English ) Off :UK : On : Off
Lock System : Off Set Password Block Programme Parental Guidance : Off

Display each menu.

Select a menu item.
Move to the pop up menu. Press the MENU button to return to normal TV viewing. Press the RETURN button to move to the previous menu screen.

Select On or Off. If you select On, a user confirm message box will be displayed to notify that new software is found. Save.
* When setting Software Update
Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen. Select the Y E S using the button and you will see the following picture. After the Software Update is complete, the System restarts.
When the Software Update O menu is "O f f", the message to O change it to "O n" appears.
When the power is turned off, downloading starts. When the power is turned on while updating, the progress status is displayed.
- During Progress of a Software Update, please note the following: Power to the TV must not be interrupted. The TV must not be switched off. The antenna must not be disconnected. After Software Update, you can confirm the updated software version in Diagnostics menu.
DIAGNOSTICS (IN DIGITAL MODE ONLY)
This function enables you to view information on the Manufacturer, Model/Type, Serial Number and Software Version. This displays the information and signal strength of the tuned MUX. This displays the signal information and service name of the selected MUX.

Engineering Diagnostics

Manufacturer Model/Type Serial No. Software Version CH 30 CH 34 CH 36 CH 38 CH 54 CH 60
Auto tuning Manual tuning Programme Edit Booster : On Software Update : Off Diagnostics Diagnostics CI Information
: LG Electronics Inc. : 22LS4D : 708KGKG00019 : V1.18.1

MENU Exit

Select Diagnostics.
Display Manufacturer, Model/Type, Serial Number and Software Version.
Display the information of Channel.
CI [COMMON INTERFACE] INFORMATION
This function enables you to watch some encrypted services (pay services). If you remove the CI Module, you cannot watch pay services. When the module is inserted into the CI slot, you can access the module menu. To purchase a module and smart card, contact your dealer. Do not repeatedly insert or remove a CAM module from the TV. This may cause a malfunction. When the TV is turned on after inserting a CI Module, you may not have any sound output. This may be incompatible with the CI module and smart card. CI (Common Interface) functions may not be possible depending upon the country broadcasting circumstances.

Input Label SIMPLINK Key Lock Set ID ISM Method ISM Method Power Saving Factory Reset

: On : Off

: Level 0
: On : Off Normal Normal : LevelOrbiter 0 Inversion White wash

Select ISM Method.

Select Normal, Orbiter, Inversion or White wash. Save.
If you do not need this function, set N o r m a l.
POWER SAVING PICTURE MODE (PLASMA TV ONLY)
This function allows you to reduce the power consumption of the TV.
Input Label SIMPLINK Key Lock Set ID ISM Method Power Saving Power Saving Factory Reset
: On : Off Level 0 Level 0 : LevelLevel Level 2 Level 3 Level 4

Select Power Saving.

Select Level 0, Level 1, Level 2, Level 3 or Level 4. Save.
Level 0 is the brightest.
In 19/22LS4D* Models, TV Speaker will not be displayed.

AUTO VOLUME LEVELER

AVL automatically remains on the same level of volume if you change programmes.
Auto Volume : Off Auto Volume : Off Balance Sound Mode : Standard 120Hz 200Hz 500Hz 1.2KHz 3KHz

Select AUDIO.

Select Auto Volume.
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; SRS TruSurround XT or (SRS TruSurround HD (32/37/42/47/52LG5010 Only)), Clear Voice, Standard, Music, Cinema, Sport or Game and you can also adjust the frequency of the equalizer. Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content. SRS TruSurround XT or (SRS TruSurround HD (32/37/42/47/52LG5010 Only)), Clear Voice, Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Auto Volume Balance Sound Mode Sound Mode : Off 0 Standard : :Standard 120Hz 200Hz 500Hz 1.2KHz 3KHz
Auto Volume Balance Sound Mode Sound Mode
: Off 0 : :Standard Standard 120Hz 200Hz 500Hz 1.2KHz 3KHz
SRS TruSurround XT Clear Voice Standard R Standard L Music Cinema Sport Game
If you select C l e a r V o i c e,
S R S T r u S u r r o u n d X T feature will not work.
Select Sound Mode. Select SRS TruSurround XT or (SRS TruSurround HD (32/37/42/47/52LG5010 Only)), Clear Voice, Standard, Music, Cinema, Sport or Game.
and are a trademark of SRS Labs, Inc. TruSurround XT and TruSurround HD technology is incorporated under license from SRS Labs, Inc.
SOUND SETTING ADJUSTMENT -USER MODE
Adjusting the audio equalizer.
Auto Volume Balance Sound Mode Sound Mode : Off 0 : :Standard (User) Standard (User) 120Hz 0 200Hz 0 500Hz 0 1.2KHz 0 3KHz 0
: Off 0 : :Standard (User) Standard 120Hz 0 200Hz 0 500Hz 0 1.2KHz 0 3KHz 0
SRS TruSurround XT Clear Voice Standard R LStandard (User) Music Cinema Sport Game

Select a frequency band.

Set the desired sound level.

BALANCE

You can adjust the sound balance of the speakers to preferred levels.

DUAL I DUAL II DUAL I+II

Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker.
NICAM Reception (In Analogue Mode Only)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received.
When NICAM mono is received, you can select N I C A M M O N O or F M M O N O.
When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O. If the stereo signal is weak, switch to F M m o n o.
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or N I C A M D U A L I + I I or F M M O N O.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent to the right loudspeaker. L+L: Audio signal from audio L input is sent to left and right loudspeakers. R+R: Audio signal from audio R input is sent to left and right loudspeakers.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
Select your desired language.

Select your country.

* If you want to change Language/ Country selection
Select Menu Language or Country.
Select your desired language or country.
If you do not finish the set-up Installation Guide by pressing RETURN or if you time out on the OSD (On Screen Display) the installation menu will continuously appear until the set up is completed whenever the TV is switched on If you select the wrong local country, teletext may not appear correctly on the screen and some problems may occur during teletext operation. The CI (Common Interface) function may not be applied based on country broadcasting circumstances. DTV mode control buttons may not function based on country broadcasting circumstances. In country that Digital broadcasting regulation isnt fixed, some DTV function may not work depending on digital broadcasting circumstances.

Dimensions

(Width x Height x Depth)

Weight

50PG30** 50PG3000-ZA

42PG20** 42PG2000-ZA

1040 x 731.3 x 308 mm 40.9x 28.7 x 1 inches 2.x 677 x 86 mm 40.9 x 26.6 x 3.4 inches 27 kg / 60.1 lbs.3 24.4 kg / 53.8 lbs AC100-240V~ 50/60Hz 3.1A 310W

50PG20** 50PG2000-ZA

1 224.7 x 849 x 364 mm 48.2 x 33.4x 1 4.3inches 1 224.7 x 790 x 86 mm 48.2x 31.1 x 3.4 inches 41.8 kg / 92.2 lbs 37.8kg / 83.3lbs AC100-240V~ 50/60Hz 4.2A 420W
with stand without stand with stand without stand
1 232.0 x 850.0 x 363.6 mm 48.5 x 33.5 x 1 inches 4.232.0 x 793.0 x 84.0 mm 48.5 x 31.2 x 3.3 inches 42.3 kg / 93.3 lbs 38.3 kg / 84.5 lbs AC100-240V~ 50/60Hz 4.2A 420W
Weight Power requirement Power Consumption

MODELS

60PG30** 60PG3000-ZA

19LS4D* 19LS4D-ZD

456.8x 396.6x 1 72.0 mm 1 x 1 x 6.8 inches 8.0 5.6 456.8 x 368.5 x 70.5 mm 1 x 1 x 2.8 inches 8.0 4.5 1.3 5.1 kg / 1 lbs 4.6 kg / 10.2 lbs AC100-240V~ 50/60Hz 0.8A 50W

22LS4D* 22LS4D-ZD

525.4 x 441.7x 1.4 mm 87 20.7 x 1.4 x 7 inches 7.3 525.4 x 41 68.6 mm 3x 20.7 x 1 x 2.7 inches 6.3 6.1 kg / 1 lbs 3.5 5.7 kg / 1 lbs 2.6 AC100-240V~ 50/60Hz 1.0A 60W
x 1009.1 x 41 mm 3.x 39.7 x 1 inches.8 6.468 x 949.5 x 88.5 mm 57 x 37 x 3.5 inches.8.4 80.6 kg / 1.7 lbs 77 72.6 kg / 1 60.1 lbs AC100-240V~ 50/60Hz 5.6A 560W
Television System Programme Coverage External Antenna Impedance Operating Temperature Operating Humidity Environment condition Storage Temperature Storage Humidity
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S0 ~ 40C / 32 ~ 104F Less than 80% -20 ~ 60C / -4 ~ 140F Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.

19LG30** 19LG3000-ZA

22LG30** 22LG3000-ZA
522.2 x 431.5 x 1 89.0 mm 20.6 x 1.0 x 7 inches 7.5 522.2 x 384.2 x 69.0 mm 20.6 x 1 x 2.7 inches 5.2 5.6 kg / 1 lbs 2.4 5.34 kg / 1 lbs 1.8 AC100-240V~ 50/60Hz 0.9A 55W

26LG30** 26LG3000-ZA

663.3 x 508.2 x 227 mm.3 26.1 x 20.1 x 9.0 inches 663.3 x 449.8 x 80.0 mm 26.1 x 1.8 x 3.2 inches 7 10.1 kg / 22.3 lbs 8.6 kg / 19.0 lbs AC100-240V~ 50/60Hz 1.2A 1 20W
458.8 x 391.0 x 1 89.2 mm 1 x 1 x 7 inches 8.1 5.4.5 458.8 x 344.5 x 69.0 mm 1 x 1 x 2.7 inches 8.1 3.6 1.1 5.02 kg / 1 lbs 4.76 kg / 10.5 lbs AC100-240V~ 50/60Hz 0.8A 50W

Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed with the code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the corresponding component can be found on the following pages. If the code is correct, the device will turn off. Press the M E N U button to store the code. Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
ALPHASTAR DSR AMPLICA BIRDVIEW CHANNEL MASTER
PROSAT RCA REALISTIC SAMSUNG SATELLITE SERVICE CO

057 138

036 CHAPARRAL 008 CITOH 054 CURTIS MATHES 050 DRAKE DX ANTENNA 024 ECHOSTAR ELECTRO HOME 089 EUROPLUS FUJITSU GENERAL INSTRUMENT HITACHI 139

096 100

101 140
HOUSTON TRACKER HUGHES 068 JANIEL 060 JERROLD 061 KATHREIN 108 LEGEND 057 LG 001 LUTRON 132 LUXOR 062 MACOM MEMOREX 057 NEXTWAVE 028 NORSAT 069 PACE SKY SATELLITE 143 PANASONIC 060 PANSAT 121 PERSONAL CABLE PHILIPS 071 PICO 105 PRESIDENT 019 PRIMESTAR 030

063 064

070 142
SCIENTIFIC ATLANTA 032 SONY 103 STARCAST 041 SUPER GUIDE 020 TEECOM 137 TOSHIBA 002 UNIDEN VIEWSTAR WINEGARD 128 ZENITH 081 091

IR CODES

1. How to Connect
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes

Output waveform

Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3

Configuration of frame

1st frame
Lead code Low custom code High custom code Data code Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Repeat frame

Repeat code

Lead code APPENDIX

9 ms 4.5 ms

0.55 ms

2.25 ms

Bit description Bit 0

0.56 ms 1.12 ms

0.56 ms 2.24 ms

Frame interval: Tf The waveform is transmitted as long as a key is depressed.

Tf Tf Tf=108ms @455KHz

Code (Hexa) 08 0B F43 AB AA 01 1E ~1A 39 BD 7E 79 0A 0E 26 2A 65 70
Function POWER INPUT TV/RADIO Q.MENU MENU GUIDE Left ( or F) Right ( or G) Up ( or D) Down ( or E) OK( ) RETURN INFO i AV MODE +) VOL + (or -) VOL - (or P (or (PR + or P +)) P (or (PR - or P -)) FAV MUTE Number Key 0~9 LIST Q.VIEW RED Key GREEN Key YELLOW Key BLUE Key TEXT T.Option SUBTITLE (Record) SIMPLINK RATIO I/II SLEEP TIME REVEAL TV D/A UPDATE HOLD INDEX

You can also adjust the screen format using the A s p e c t R a t i o in the Q.MENU. or PICTURE menu. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01 : 02 : 04 : 05 : Normal screen (4:3) Wide screen (1 6:9) Zoom1 Zoom: Original 07 : 1 4:: Just Scan
You can also adjust contrast in the PICTURE menu. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 14. * Refer to Real data mapping 1. See page 1 Ack [g][ ][Set ID][ ][OK/NG][Data][x] 07. Brightness (Command: k h) G To adjust screen brightness. You can also adjust brightness in the PICTURE menu. Transmission [k][h][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 14. * Refer to Real data mapping 1. See page 1 Ack [h][ ][Set ID][ ][OK/NG][Data][x] 08. Colour (Command: k i)
G To adjust the screen colour.
[c][ ][Set ID][ ][OK/NG][Data][x] * Using the PC input, you select either 16:9 or 4:3 screen aspect ratio. * In HDMI/Component (over 720p) mode, Just Scan is available. * You can only select Original in UK digital teletext (MHEG-5).
03. Screen Mute (Command: k d)
G To select screen mute on/off.
[k][d][ ][Set ID][ ][Data][Cr] Data 00 : Screen mute off (Picture on) 01 : Screen mute on (Picture off)
You can also adjust colour in the PICTURE menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 14. * Refer to Real data mapping 1. See page 1 Ack [i][ ][Set ID][ ][OK/NG][Data][x]
[d][ ][Set ID][ ][OK/NG][Data][x]

09. Tint (Command: k j)

G To adjust the screen tint.
13. Balance (Command: k t)

G To adjust balance.

You can also adjust tint in the PICTURE menu.
[k][j][ ][Set ID][ ][Data][Cr] Data Red : 00 ~ Green : 64 14. * Refer to Real data mapping 1. See page 1 Ack [j][ ][Set ID][ ][OK/NG][Data][x]
You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 14. * Refer to Real data mapping 1. See page 1 Ack [t][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
G To adjust the screen sharpness.
14. Colour Temperature (Command: k u)
G To adjust colour temperature. You can also adjust
You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64 14. * Refer to Real data mapping 1. See page 1 Ack [k][ ][Set ID][ ][OK/NG][Data][x]
Colour Temperature in the PICTURE menu. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 00: Medium Ack 01: Cool 02: Warm
[u][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l) G To select OSD (On Screen Display) on/off when controlling remotely.

G Select channel to following physical number.
24. Input select (Command: x b) (Main Picture Input)
G To select input source for main picture.
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Data 00 : High channel data Data 01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> (188H), DTV No. 0 -> Dont care Data 02 : 0x00 : ATV, 0x10 : DTV, 0x20 : Radio Channel data range Analogue - Min: 00 ~ Max: 63 (0~99) Digital - Min: 00 ~ Max: 3E7 (0~999) Ack [a][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 ~ Max: 7DH
[x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 LSB 0
External Input External Input 1
Input Number Data DTV Analogue AV Component RGB HDMI Data 0 Input1 Input2 Input3
21. Channel Add/Skip (Command: m b)
G To set skip status for the current Programme.
[m][b][ ][Set ID][ ][Data][Cr] Data 00 : Skip 01 : Add

Input Number 1

Ack [b][ ][Set ID][ ][OK/NG][Data][x]

22. Key (Command : m c)

G To send IR remote key code.
[m][c][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 108.
[b][ ][Set ID][ ][OK/NG][Data][x]
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
23. Control Back Light (LCD TV only) (Command: m g)
G To Cont rol t he back light.
[m][g][ ][Set ID][ ][Data][Cr] Data : Min: 00 ~ Max: 64 (*transmit by hexadecimal code)
[g][ ][Set ID][ ][OK/NG][Data][x]
* Real data mapping 3 (Equalize) Step: OSD Step: OSD 00 : -: : -: : -: : -: : -: : -: : -: : -: : -: : -: : -: 1 : -: : -: : -: : -: : : 24