ENGLISH

LCD TV PLASMA TV OWNERS MANUAL
LCD TV MODELS L U * * L H 5 0* * L U * * L H 5 0* * L U * * L H 5 0* * L U * * L H 5 0* * L U * * L H 7 0* * L H * * L H 7 0* * L H * * L H 7 0* * L H * * L H 7 0* * L H 2 0* * L F 2 5* * L H 2 0* * L F 2 5* * L H 2 0* * L F 2 5* * L H 3 0* * L H 4 9* * L H 3 0* * L H 4 9* * L H 3 0* * L H 4 9* * L H 3 0* * L H 4 9* * L H 4 0* * L G 2 1* * L H 4 0* * L G 2 1* * L H 4 0* * L G 2 1* * L H 4 0* * PLASMA TV MODELS P S 7 0* * P S 7 0* * P S 8 0* * P S 8 0* *
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
I D N u m b e r ( s ) : 6337 : 19LU: 19LU: 22LU: 22LU: 19LU: 19LU: 19LU: 22LU: 22LU: 22LU: 26LU: 26LU: 26LU5020 6200: 19LH: 19LH: 19LH2020 6201: 22LH: 22LH: 22LH2020 6202: 26LH: 26LH: 26LH2020 6203: 32LH: 32LH: 32LH2020 6204: 37LH: 37LH: 37LH: 42LH: 42LH: 42LH: 32LH: 32LH: 32LH: 32LH3030 6208: 37LH: 37LH: 37LH: 37LH3030 6209: 42LH: 42LH: 42LH: 42LH3030 6210: 47LH: 47LH: 47LH: 47LH32LH4000 1: 6467 : 32LH: 32LH4010 6212: 37LH: 37LH: 37LH4010 6213: 42LH: 42LH: 42LH4010 6214: 47LH: 47LH: 47LH4010 6484: 32LH: 32LH: 32LH5010 6485: 37LH: 37LH: 37LH5010 6486: 42LH: 42LH: 42LH: 47LH: 47LH: 47LH5010 6195: 32LH: 32LH: 32LH: 32LH7030 6196: 37LH: 37LH: 37LH: 37LH7030 6197: 42LH: 42LH: 42LH: 42LH7030 6198: 47LH: 47LH: 47LH: 47LH: 32LF: 32LF: 37LF: 37LF: 42LF: 42LF: 32LH: 37LH: 42LH: 47LH: 32LG: 37LG: 42LG2100 6191: 50PS7000 6192: 60PS7000 6193: 50PS8000 6194: 60PS8000
Please read this manual carefully before operating your TV. Retain it for future reference. Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information. To your dealer when requiring any service.
This product qualifies for ENERGY STAR in the factory default (Home Use mode) setting and this is the setting in which power savings will be achieved. Changing the factory default picture setting or enabling other features will increase power consumption that could exceed the limits necessary to qualify for Energy Star rating.
Use screws 12mm(+0.5/-0.5) long on the SET assembly side. (Only 42/47LH70**)
Set assembly side (with guide spacer) Set assembly side (without guide spacer)

Guide spacer

Wall Mounting Bracket(Separate purchase) RW120 RW230 AW-47LG30M
(19/22LU50** /19/22LU40** /19/22LH20**)
(26LU50**/32LF25** /32LG21**/26/32LH20**/ 32LH30**/32LH40**/ 32LH49** /32LH50**/32LH70**)

AW-50PG60MS

AW-60PG60MS
(32/37/42LF25** /32/37/42LG21** /32/37/42LH20** /32/37/42/47LH30** /32/37/42/47LH40** /32/37/42/47LH49** /32/37/42/47LH50** /32/37/42/47LH70**)

(50PS70**/50PS80**)

(60PS70**/60PS80**)

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.
Image shown may differ from your TV.

LIS T M UT E Q.V IEW

PO W ER

ENER GY

SAVIN G

Q.M EN U IN FO

RETU RN

/ EX IT

GU ID E

MA R FA K V

This item is not included for all models. * Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth. Polishing Cloth Do not use excessive force. Polishing cloth for This may cause scratching use on the screen. or discolouration.

Owners Manual

(Except for 19/22LH20**, 19/22LU40**, 19/22/26LU50**)
TO USE THE STAND REAR COVER (Only 37/42/47LH70**)
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your TV has bolts in the eyebolts, loosen then bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.
Image shown may differ from your TV. Install the S T A N D R E A R C O V E R as shown.

STAND REAR COVER

Grip the knob in your fingers and pull it. Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
When moving the TV undo the cords first. Use a platform or cabinet strong and large enough to support the size and weight of the TV. To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
BACK COVER FOR WIRE ARRANGEMENT
Connect the cables as necessary. To connect additional equipment, see the EXTERNAL EQUIPMENT SETUP section.
LCD TV Models : 32/37/42LF25**, 32/37/42LG21**, 26/32/37/42LH20**, 32/37/42/47LH30**, 32/37/42/47LH40**, 32/37/42/47LH49**, 32/37/42/47LH50**
Install the CABLE MANAGEMENT CLIP as shown.

CABLE MANAGEMENT CLIP

Open the CABLE MANAGEMENT CLIP as shown.
Fit the CABLE MANAGEMENT CLIP as shown.
Fit the C A B L E M A N A G E M E N T C L I P as shown.
How to remove the cable management clip (LCD TV Models : 19/22LH20**)
Hold the CABLE MANAGEMENT CLIP with both hands and pull it backward.
After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables.
not use the CABLE MANAGEMENT CLIP to lift the TV. - If the TV is dropped, you may be injured or the TV may be damaged.
Align the hole with the tab on the C A B L E M A N A G E M E N T C L I P. Turn the C A B L E M A N A G E M E N T C L I P as shown. Note : that excessive force might cause damage to the product when using Cable Management clip.
After Connecting the cables as necessary, install CABLE HOLDER as shown and bundle the cables. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section.

CABLE HOLDER

Install the C A B L E M A N A G E M E N T C L I P as shown.
Connect the cables as necessary. To connect additional equipment, see the E x t e r n a l e q u i p m e n t S e t u p section.
How to remove the cable management clip How to secure the power cable

(Only 32/37/42/47LH70**)

Hold the C A B L E M A N A G E M E N T C L I P with both hands and pull it upward.

Input Video O O Audio O O AV1 (TV Out) X O O X O RGB O X Output Video, Audio Analogue only Analogue, DTV, AV1/2/3 output is available.
(When DTV scheduled recording is in progress using recording equipment.)
AUDIO/ VIDEO (R) AUDIO (L)

Scart AV1 AV2

Output Type Current input mode Digital TV Analogue TV, AV1/3 Component/RGB HDMI AV2
AV2 (Monitor Out) O O X X O

AV2 O O

(The input mode is converted to DTV.)
TV Out : Outputs analogue TV signals. Monitor Out: Outputs the current screen image.
Any Euro scart cable used must be signal shielded.
Connecting with a S-Video cable
(Only 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**)
Connect the S-VIDEO output of the DVD to the S V I D E O input on the TV. Connect the audio outputs of the DVD to the A U D I O input jacks on the TV. Turn on the DVD player, insert a DVD. Select A V 3 input source using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.

VIDEO S-VIDEO

ANT IN

OUTPUT SWITCH

ANT OUT
Connecting the HDMI cable
Connect the HDMI output of the DVD to the H D M I / D V I I N 1, H D M I I N 2(Except for 19/22LH20**),, H D M I I N 3 (Except for 19/22LU40**, 19/22LU50**, 19/22/26/32/37/42LH20**, 32/37/42LF25**, 32/37/42LG21**) or H D M I I N 4 (Only 32/37/42/47LH49**, 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**) jack on the TV. Select HDMI1, HDMI2(Except for 1 9/22LH20**), HDMI3(Except for 1 9/22LU40**, 19/22LU50**, 19/22/26/32/37/42LH20**, 32/37/42LF25**, 32/37/42LG21**) or HDMI4(Only 32/37/42/47LH49**, 32/37/42/47LH50**, 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**) input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions.
TV can receive video and audio signals simultaneously when using an HDMI cable. G If the DVD does not support Auto HDMI, you must set the output resolution appropriately. G Check that your HDMI cable is version 1.3 or higher. If the HDMI cables dont support HDMI version 1.3, flickering or no screen display can result. Please use the latest cables that support at least HDMI version 1.3.

VCR SETUP

To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF Cable

ANT OUT S-VIDEO VIDEO

Wall Jack
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
Connect the antenna cable to the A N T I N socket of the VCR.
Press the P L A Y button on the VCR and match the appropriate channel between the TV and VCR for viewing.
Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select A V 1 input source using the I N P U T button on the remote control. If connected to A V 2 Euro scart socket, select A V 2 input source.
Any Euro Scart cable used must be signal shielded.
Connecting with a RCA cable
(Except for 19/22LU40**, 19/22LU50**, 19/22LH20**, 32/37/42LF25**)
V Connect the A U D I O/V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select A V 3 input source using the I N P U T button on the remote control.

S-VIDEO

If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the TV.
Connect the S-VIDEO output of the VCR to the S V I D E O input on the TV set. The picture quality is improved; compared to normal composite (RCA cable) input. Connect the audio outputs of the VCR to the A U D I O input jacks on the TV. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owners manual.) Select A V 3 input source with using the I N P U T button on the remote control.
If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-VIDEO can be received.

INSERTION OF CI MODULE

- To view the encrypted (pay) services in digital TV mode. - This feature is not available in all countries. Insert the CI Module to P C M C I A (Personal Computer Memory Card International Association) C A R D S L O T of TV as shown. For further information, see p.63.

MANUAL PROGRAMME TUNING (IN ANALOGUE MODE)
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.

3 BG V/UHF

Storage : On System Band Channel Fine Search Name Store Close

F G F G

Select V / U H F or C a b l e.
Select T V. Select the desired programme number on.
Commence searching. Select S t o r e.
Select a TV system. Press the M E N U button to return to normal TV viewing. Press the R E T U R N button to move to the previous menu screen.
O Use NUMBER buttons to input a 4-digit password in L o c k S y s t e m O n. L : SECAM L/L (France)
B G : PAL B/G, SECAM B/G (Europe / East Europe / Asia / New Zealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) D K : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) To store another channel, repeat steps 4 to 9.
Storage : On System Band Channel Fine Search Name Store

Assigning a station name

You can assign a station name with five characters to each programme number.
Select the position and make your choice of the second character, and so on. You can use an the alphabet A to Z , the number 0 to 9 , +/ -, and blank. Select C l o s e.

Select T V.

Select S t o r e.

Select N a m e.

Fine Tuning (Except for 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**)
Normally fine tuning is only necessary if reception is poor.

Select F i n e.

Fine tune for the best picture and sound.

PROGRAMME EDIT

When a programme number is skipped, it means that you will be unable to select it using P viewing. button during TV
If you wish to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. This function enables you to skip the stored programmes. You can change the programme number using Movefunction, if Automatic Numbering is unchecked when you start Auto Tuning.

YLE TV1

1 YLE TV1
2 YLE TVYLE FST 8 YLETV4 Film 50 TV400
Auto Tuning Manual Tuning Programme Edit Programme Edit Software Update Diagnostics CI Information
4 TV4 Stockholm 6 CNN 9 YLE Teema : On 24 TV4 Fakta 24 TV4 Fakta 24 TV4 Fakta 87 Doku/Kika
84 Kanal Lokal 86 Info/3sat 88 TVE 1

Previous Skip

Pr. Change

Navigation

Page Change
Select P r o g r a m m e E d i t.
Enter the P r o g r a m m e E d i t. Select a programme to be stored or skipped.

IN DTV/RADIO MODE

Skipping a programme number
Select a programme number to be skipped.
When programmes are to be skipped, the
skipped programme shows in blue and these programmes will not be selected by the P buttons during TV viewing.

BLUE Turn the programme number to blue. BLUE Release.
If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or EPG.

IN TV MODE

This function enables you to delete or skip the stored programmes. You can also move some channels and use other programme numbers.

Deleting a programme

Select a programme number to be deleted.
RED Delete. BLUE Release.
RED Turn the programme number to red.
The selected programme is deleted, all the fol-
lowing programmes are shifted up one

Moving a programme

Select a programme number to be moved. Turn the programme number to green.

GREEN Release.

Auto Sort

YELLOW Start Auto Sort.

After activating Auto Sort once, you can no longer edit programmes.
When a programme number is skipped it means
that you will be unable to select it using the P button during normal TV viewing.
BLUE Turn the programme number to blue.

BLUE Release.

BOOSTER (IN DIGITAL MODE)
If reception is poor select Booster to On. When the signal is strong, select "Off".
(Except for 32/37/42/47LH70**, 50/60PS70**, 50/60PS80**)
Auto Tuning Manual Tuning Programme Edit Booster Booster Software Update Diagnostics CI Information

: On : On

Booster Booster Software Update Diagnostics CI Information

Off : On On On : On

Select B o o s t e r.

Select O n or O f f.

SOFTWARE UPDATE
Software Update means software can be downloaded through the digital terrestrial broadcasting system.
Auto Tuning Manual Tuning Programme Edit Software Update Diagnostics CI Information On :: On

Off On :: On On On

1 MENU 2
Select S o f t w a r e U p d a t e.
Select O n or O f f. If you select O n, a user confirm message box will be displayed to notify that new software is found. Save.
* When setting Software Update
Occasionally, a transmission of updated digital software information will result in the following menu on the TV screen.
Software update is available. Would you like to download now? (approximately 30 Min ~ 2 hours) Your TV software is updated when you turn off the TV using the remote control or local key. Do not unplug! Yes No
Select the Y e s using the button and you will see the following picture.
Software downloading progress. Ver. 03.02.00 Ver. 03.01.00
After the Software Update is complete, the System restarts.

Select Bluetooth headset PIN number. Refer to the user manual of the applicable device for the PIN number.
Select B l u e t o o t h H e a d s e t.
GREEN Search the Bluetooth headset.
Connect the Bluetooth headset.
Connecting to Bluetooth headset already registered
Bluetooth headsets are listed in the order most recently used with the headset currently in use listed at the top. When connecting to the Bluetooth device already registered, you can select and connect directly without any PIN validation.
Select B L U E T O O T H. Select B l u e t o o t h H e a d s e t.
Message asking to connect the selected Bluetooth headset will be displayed. Select Y e s or N o. Connect the Bluetooth headset.
Select the desired Bluetooth headset.
After connecting/using the Bluetooth headset, the headset setting will be the D i s c o n n e c t e d condition automatically when you turn off the power of the TV and then turn on. After connecting the Bluetooth headset, the TV speaker is switched to Mute condition and the sound will only be generated from the headset.
Disconnecting the Bluetooth headset during use
Disconnect the Bluetooth headset.
When requesting to connect to TV from the Bluetooth headset
When the Bluetooth menu is "On" and there is a connection request from the headset, this message is dispalyed. Not all headsets support the this feature.(Refer to the user manual of the applicable Bluetooth headset.) Some headset types may make an attempt at connection when they are turned off/on even though they are not included in the Registered Device list.
Do you want to connect your headset?

Select Y e s or N o.

LG recommends the following headset models. -Mono/Stereo : Nokia : BH501 / Jabra : BT620s / Sony : DR-BT30Q / Philips : SHB7100 / Plantronics : Pulsar590 / Motorola : HT820 / Motorola : S9 / LG : HBS200 -Only Stereo : Logitech : Freepulse-wireless -Only Mono : Motorola : H800 / Jabra : BT250v / Jabra : BT2040 / Plantronics : Discovery665 / Nokia : BH-900 / Sony Ericsson : HBH-GV435 / Samsung : WEP500 / LG: Prada HBM-510 There might be an audio delay, depending on the buffer memory size of the headset. G The stereo/mono headset officially certified to be Bluetooth compatible can be searched and connected. G The stereo/mono headset that supports the A2DP or HSP function among the Bluetooth devices can be connected. G If the surrounding environment of the TV is as follows, the device may not be searched or connected properly. -If there is strong electromagnetic wave. -If there are many Bluetooth devices. -If the headset is turned off, not in place or has an error. -Because products such as microwave oven, wireless LAN, plasma light, gas range etc., use the same frequency range, it can cause communication error.
Only one Bluetooth headset can be connected at once. G Connection that is lost due to the TV being turned off etc. will not be automatically recovered. Try connecting the applicable device again. G Some operations can be slower while operating the headset. G Even if you choose simplink Home Theater after using the headset during Simplink operation, the unit will not automatically switch to Home Theater speakers. G When the headset connection continuously fails, pair the device one more time. G The audio quality of mono headsets will not be as good as that for stereo headsets. G Mono headsets may suffer from noise as the distance from the TV increases, because they use a different transmission method compared with stereo headsets. G When a Bluetooth headset is in use, the Volume +/- and Mute keys do not work, and the Audio menu returns to the default value and is disabled. G With Bluetooth set to On, if any registered devices are turned on, the TV will switch to Bluetooth mode automatically even though you are watching in another input mode. In this case, set Bluetooth to Off.

Contrast Brightness

Advanced Control Screen
Sharpness 60 ? All picture setting will be resetted. Colour 60 continue? G Tint 0 R Advanced Control Yes Picture Reset Picture Reset No
Select P i c t u r e R e s e t.
Initialize the adjusted value.
POWER INDICATOR (except for 19/22LU40**, 19/22/26LU50**, 19/22/26LH20**, 32/37/42LF25**, 32/37/42LG21**, 50/60PS70**, 50/60PS80**)
It helps you adjust the brightness of moving LED and sound when power is turned on. S t a r t u p S o u n d(Only 32/37/42/47LH70**) Set Startup Sound to O f f , L o w , M e d i u m or H i g h when the power is turned on. Standby Light Determines whether to set the indicator light on the front of the TV to O f f, L o w or H i g h in standby mode.(Only 32/37/42/47LH70**) Determines whether to set the indicator light on the front of the TV to O n or O f f in standby mode.(except for 32/37/42/47LH70**) Power Light Determines whether to set the indicator light on the front of the TV to O n or O f f when the power turns on.
SIMPLINK Key Lock Simple Manual Set ID Power Indicator Demo Mode Mode Setting Factory Reset :1 : On : Store Demo
SIMPLINK Key Lock Simple Manual Set ID Power Indicator Demo Mode Mode Setting Factory Reset
: On : Off :1 Startup Sound : On Standby Light : Store Demo Power Light Close

Medium On On

Select P o w e r I n d i c a t o r.
Select S t a r t u p S o u n d(Only 32/37/42/47LH70**), S t a n d b y L i g h t or P o w e r L i g h t. Select your desired Source.
IMAGE STICKING MINIMIZATION (ISM) METHOD (PLASMA TV ONLY)
A frozen or still picture displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for prolonged periods. White Wash White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash. Orbiter Orbiter may help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Colour Wash The colour block with the screen moved a little and the white pattern are alternately displayed. It is difficult to sense the afterimage occurred while the temporary afterimage is removed and the colour pattern is operating.

Set the desired sound level.

SRS TRUSURROUND XT

Select this option to sound realistic.
S R S T r u S u r r o u n d X T : TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multicannel content over two speakers.
Select S R S T r u S u r r o u n d X T.
is a trademark of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.

BALANCE

You can adjust the sound balance of the speakers to preferred levels.
Auto Volume Clear Voice II Balance Balance Sound Mode : Standard SRS TruSurround XT : Off Treble Bass
Auto Volume Clear Voice II : Off : Off Level Balance Sound Mode : Standard 3

: Off : Off Level 3 0

L L + R R

Balance 0L L 0

R + F R

Select B a l a n c e.

TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status. In A V 1, A V 2, A V 3, C O M P O N E N T, R G B and H D M I 1 with HDMI to DVI cable, the TV speaker can be operational even when there is no video signal. If you wish to use an external Hi-Fi system, turn off the TVs internal speakers.
Treble Bass Reset Digital Audio Out : PCM TV Speaker TV Speaker Off : On Volume 0
Treble Bass Reset Digital Audio Out : PCM TV Speaker TV Speaker :: On Off Volume Audio Description :On 0
SRS TruSurround XT : Off 50 50
SRS TruSurround XT : Off Off Off On

Audio Description :On

Select T V S p e a k e r.
When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output the TV speaker. Some menus in A U D I O are disabled when TV Speaker is set to Off. G
DTV AUDIO SETTING (IN DIGITAL MODE ONLY)
(This menu is enabled only in Sweden. ) When different audio types exist in an input signal, this function allows you to select the audio type you want.
Treble Bass Reset Digital Audio Out : PCM TV Speaker : On DTV Audio Setting Auto DTV Audio Setting : :Auto Audio Description :On

Treble Bass Reset Digital Audio Out : PCM TV Speaker : On : On Audio Description :On Volume 0
Treble Bass Reset Digital Audio Out : PCM TV Speaker : On Volume Audio Description : On Audio Description :On Off On On 0
Select A u d i o D e s c r i p t i o n. Select O n or O f f.
Adjustment for Audio Description Volume With selecting On

Select V o l u m e.

Stereo/Dual Reception (In Analogue Mode Only)
When a programme is selected, the sound information for the station appears with the programme number and station name.
Select A u d i o. Select the sound output.
Broadcast Mono Stereo Dual

On Screen Display

MONO STEREO DUAL I, DUAL II, DUAL I+II
Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved. Language selection for dual language broadcast If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II.

DUAL I DUAL II DUAL I+II

Sends the primary broadcast language to the loudspeakers. Sends the secondary broadcast language to the loudspeakers. Sends a separate language to each loudspeaker.
NICAM Reception (In Analogue Mode Only)
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received.
When NICAM mono is received, you can select N I C A M M O N O or F M M O N O.
When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O. If the stereo signal is weak, switch to F M M O N O.
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or N I C A M D U A L I + I I or F M M O N O.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers. Select the sound output.
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent to the right loudspeaker. L + L : Audio signal from audio L input is sent to left and right loudspeakers. R + R : Audio signal from audio R input is sent to left and right loudspeakers.

You can also adjust treble in the AUDIO menu. Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1 See page 157
[r][ ][Set ID][ ][OK/NG][Data][x]

1 4. Bass (Command: k s)

1 0. S h a r p n e s s (C o m m a n d : k k ) G To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1 See page 157 Ack [k][ ][Set ID][ ][OK/NG][Data][x]

G To adjust bass.

You can also adjust bass in the AUDIO menu. Transmission [k][s][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1 See page 157
[s][ ][Set ID][ ][OK/NG][Data][x] 1 5. B a l a n c e (C o m m a n d : k t )
1 1. O S D S e l e c t (C o m m a n d : k l ) G To select OSD (On Screen Display) on/off when controlling remotely.

G To adjust balance.

You can also adjust balance in the AUDIO menu. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data Min : 00 ~ Max : 64. * Refer to Real data mapping 1. See page 157 Ack [t][ ][Set ID][ ][OK/NG][Data][x]
[k][l][ ][Set ID][ ][Data][Cr] Data 00 : OSD off Ack 01 : OSD on
[l][ ][Set ID][ ][OK/NG][Data][x] 1 6. C o l o u r T e m p e r a t u r e (C o m m a n d : k u ) 1 2. Remote control lock mode ( C o m m a n d : k m )
G To lock the front panel controls on the monitor and G To adjust colour temperature. You can also adjust Colour
remote control. Transmission Data 00 : Lock off Ack
Temperature in the PICTURE menu. Transmission [k][u][ ][Set ID][ ][Data][Cr] Data 00: Medium 01:Cool Ack
[k][m][ ][Set ID][ ][Data][Cr] 01 : Lock on

02: Warm

[u][ ][Set ID][ ][OK/NG][Data][x]
[m][ ][Set ID][ ][OK/NG][Data][x] * If you are not using the remote control, use this mode. When main power is on/off, external control lock is released. * Local Power Key will work properly.
17. ISM Method (Plasma TV only) (Command: j p)
G To control the ISM method. You can also adjust ISM
19. Auto Configure(Command: j u)
G To adjust picture position and minimize image shaking
Method in OPTION menu. Transmission Data 02: Orbiter 04: White wash 08: Normal 20: Colour Wash
automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x] 20.Tune Command (Command: m a)
G Select channel to following physical number.
[j][p][ ][Set ID][ ][Data][Cr]
[p][ ][Set ID][ ][OK/NG][Data][x] 18. Energy Saving (Command: j q)
G To reduce the power consumption of the TV. You can also
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr] Data00 : High channel data Data01 : Low channel data ex. No. 47 -> 00 2F (2FH) No. 394 -> 01 8A (18AH), DTV No. 0 -> Dont care Data02 : 0x00 : Analogue Main 0x10 : DTV Main 0x20 : Radio Channel data range Analogue - Min: 00 ~ Max: 63 (0~99) Digital - Min: 00 ~ Max: 3E7 (0~999) (Except For Sweden, Finland, Norway, Denmark, Ireland) Digital - Min: 00 ~ Max: 270F (0~9999) (Only Sweden, Finland, Norway, Denmark, Ireland) Ack [a][ ][Set ID][ ][OK/NG][Data][x] Data Min: 00 ~ Max: 7DH

OPEN SOURCE LICENSE

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Copyright (C) 1989, 1991 Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Lesser General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. GNU GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run. GNU LESSER GENERAL PUBLIC LICENSE TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called "this License"). Each licensee is addressed as "you". A "library" means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The "Library", below, refers to any such software library or work which has been distributed under these terms. A "work based on the Library" means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term "modification".) "Source code" for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does. 1. You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License. d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. (For example, a function in a library to compute square roots has a purpose that is entirely well-defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.