USB Input

S-Video Input S-VIDEO Connect S-Video out from an S-VIDEO device.
ATTACHING THE TV TO A WALL(This feature is not available for all models.)
Set it up close to the wall so the product doesnt fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesnt fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children dont climb on or hang from the product.
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture. (If your product has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.) * Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes. Secure the wall brackets with the bolts (not provided as parts of the product, must purchase separately) on the wall. Match the height of the bracket that is mounted on the wall.
Use a sturdy rope (not provided as parts of the product, must purchase separately) to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

! NOTE

When moving the product to another place undo the ropes first. Use a product holder or a cabinet that is big and strong enough for the size and weight of the product. To use the product safely make sure that the height of the bracket that is mounted on the wall is same as that of the product.
BACK COVER FOR WIRE ARRANGEMENT
Hold the C A B L E M A N A G E M E N T with hands and push it as shown.

CABLE MANAGEMENT

Connect the cables as necessary. To connect an additional equipment, see the External equipment Setup section.
Reinstall the C A B L E M A N A G E M E N T as shown.
The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally.

GROUNDING

Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.

Power Supply

Short-circuit Breaker
DESKTOP PEDESTAL INSTALLATION
For proper ventilation, allow a clearance of 4" on each side and from the wall.

4 inches

WALL MOUNT: HORIZONTAL INSTALLATION
For proper ventilation, allow a clearance of 4" on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide.

Refer to the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the TV

Y PB PR

PB B-Y Cb Pb

PR R-Y Cr Pr

Video output ports on DVD player
When connecting with a Euro Scart
Connect the Euro scart socket of the DVD to the A V 1 Euro B C) scart socket on the set.

AUDIO OUT

Select AV1 input source with using the I N P U T button on the remote control. If connected to AV2 Euro scart socket, select AV2 input source.
AUDIO/ AUDIO/ VIDEO VIDEO
(R) AUDIO (L) (R) AUDIO (L)
Please use the shield scart cable.
When connecting with an S-Video cable
Connect the S-VIDEO output of the DVD to the S V I D E O input on the set. Connect the audio outputs of the DVD to the A U D I O input jacks on the set. Turn on the DVD player, insert a DVD. Select AV3 input source with using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions.

USB IN

ANT IN

OUTPUT SWITCH

ANT OUT
When connecting HDMI cable
Connect the HDMI output of the DVD to the H D M I / D V I I N 1 or H D M I I N 2 jack on the set.
TV can receive the video and audio signal simultaneously with using a HDMI cable. If the DVD does not support Auto HDMI, you need to set the output resolution appropriately.

HDMI-DVD OUTPUT

VCR SETUP
To avoid picture noise (interference), leave an adequate distance between the VCR and TV. n Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
When connecting with an antenna

GB PC)

Wall Jack
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the set.
Connect the antenna cable to the A N T I N socket of the VCR.
VIDEO L/MONO AUDIO R VIDEO L/MONO AUDIO R

ANTENNA ANTENNA IN IN

Press the P L A Y button on the VCR and match the appropriate programme between the TV and VCR for viewing.

Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the set. 1
Turn on the PC and the set.
Select RGB input source with using the I N P U T button on the remote control.

RGB (PC)

DVI-PC OUTPUT
Connect the DVI output of the PC to the H D M I / D V I I N 1 jack on the set.
Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the set.
If the PC has a DVI output and no HDMI output, a separated audio connection is necessary. If the PC does not support Auto DVI, you need to set the output resolution appropriately.
Supported Display Resolution (RGB /HDMI[PC]mode) Resolution 720x400 640x480 800x600 1024x768 Horizontal Frequency(kHz) 31.469 31.469 37.500 37.879 46.875 48.363 56.476 60.023 47.693 47.700 47.700 Vertical Frequency(Hz) 70.08 59.94 75.00 60.31 75.00 60.00 70.06 75.02 59.99 60.00 60.00
1280x768 1360x768 1366x768
enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the sets screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the set; change the resolution output of PC accordingly. G There might be noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode into another resolution or change the refresh rate into another rate or adjust the brightness and contrast on the menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult it to the manufacturer of the PC graphic card. G The synchronization input waveform for Horizontal and Vertical frequencies are separate.
We recommend using 1024x768, 60Hz (42 inch PLASMA TV models)/ 1360x768, 60Hz (50 inch PLASMA TV models) for the PC mode, they provide the best picture quality.
the signal cable from the monitor output port of the PC to the RGB (PC/DTV) port of the set or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port

G Connect

on the set. the audio cable from the PC to the Audio input on the set. (Audio cables are not included with the set). G If using a sound card, adjust PC sound as required. G This set uses a VESA Plug and Play Solution. The set provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this set. G DDC protocol is preset for RGB (Analog RGB) and HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionally. G If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC on the set. G If graphic card on the PC does output analog and digital RGB simultaneously, set the set to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the set.) G DOS mode may not work depending on video card if you use a HDMI to DVI cable. G When you use too long RGB-PC cable, there might be a noise on the screen. We recommend using under 5m of the cable. It provides the best picture quality.

SETUP MENU

PICTURE MENU

AUDIO MENU

SETUPO TimeShift Mode PICTURE O Record Quality AUDIOO Recorded TV TIMEO Schedule List OPTIONO Manual Record DVRG HDD Format DivX Reg. Code USB Backup USB HDD Format
SETUPO Language PICTUREO Country AUDIOO Input Label SIMPLINK TIMEO Key Lock OPTION G ISM Method DVRO Low Power Set ID
SETUPO Clock PICTUREO Off Time AUDIOO On Time Sleep Time TIME G Auto Sleep OPTIONO DVRO

Subtitle

DVR MENU

OPTION MENU

TIME MENU
The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation. In this manual, the OSD (On Screen Display) may be different from your TVs because it is just example to G help the TV operation. In the teletext mode, menus are not displayed G G Its not available to use SETUP menu on playing recorded programme.

AUTO PROGRAMME TUNING

Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR + / or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. Its not available to use this function on recording programme.
Press the M E N U button and then D / SETUP menu. Press the G button and then D / Tuning. Press the G button and then D /

E button to select the

E button to select Auto
E button to select System.
Press the F / G button to select a TV system menu; BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / NewZealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) L : SECAM L/L (France) M : (USA / Korea / Philippines) (option) Press the D /
E button to select Storage
Press the F / G button or NUMBER buttons to select the beginning programme number. If you use NUMBER buttons, any number under 10 is entered with a numeric 0 in front of it, 0 i.e.for 5. Press the D /

E button to select Start.
Auto Tuning Manual Tuning Programme Edit Favourite Prog.
System Storage From Start
Press the G button to begin auto tuning. All receivable stations are stored. The station name is stored for stations which broadcast VPS (Video Programme Service), PDC (Programme Delivery Control) or TELETEXT data. If no station name can be assigned to a station, the channel number is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47), followed by a number. To stop auto tuning, press the M E N U button. When auto tuning is completed, the Programme edit menu appears on the screen. See the Programme edit section to edit the stored programme.
Auto Tuning Name System Storage

C 04 M 1

MENU Stop
Press the E X I T button to return to normal TV viewing.

MANUAL PROGRAMME TUNING

Manual programme lets you manually tune and arrange the stations in whatever order you desire.
Its not available to use this function in TimeShift Mode On mode. Its not available to use this function on recording programme.
Press the M E N U button and then D / E button to select the SETUP menu. Press the G button and then D / E button to select Manual Tuning. Press the G button and then D / E button to select Storage. Press the F / G button or NUMBER buttons to select the desired programme number (0 to 99). If you use NUMBER buttons, any number under 10 is entered with a numeric 0 in 0 front of it, i.e. for 5. Press the D / E button to select System. Press the F / G button to select a TV system menu; BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / NewZealand / M.East / Africa / Australia) I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa) DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS) L : SECAM L/L (France) M : (USA / Korea / Philippines) (option) Press the D / E button to select Band. Press the G button and then F / G button to select V/UHF or Cable. Press the D / E button to select Channel. You can select the desired programme number with the F / G button or number buttons. If possible, select the programme number directly with the number buttons. Any number under is entered with a numeric 0 in front of it, i.e. for 5. Press the D / E button to select Search. Press the F / G button to commence searching. If a station is found the search will stop. Press the O K button to store it. To store another station, repeat steps 3 to 1 3. Press the E X I T button to return to normal TV viewing.

Storage

G F G5
System Band Channel Fine Search Name C Booster Store

BG V/UHF 5

05 Off

FINE TUNING

Normally fine tuning is only necessary if reception is poor.
Press the M E N U button and then D / the SETUP menu.
Press the G button and then D / Manual Tuning.
Press the G button and then D /

button to select Fine.

Press the F / and sound.
button to fine tune for the best picture

You can increase or decrease recording time by pressing the O button while recording. After pressing the O button, press the F / G buttons repeatedly to increase or decrease the recording time. Each time you press F / G button the recording duration changes as shown below. + 10 m i n -> + m i n -> + m i n -> + m i n -> + m i n -> + m i n No Change - 10 m i n -> - m i n -> - m i n -> - m i n -> - m i n -> - m i n
The extra recording time added to existing setting equals the final recording time.
Recording Option Recording Time 00:00~02:00 (0

00:00 Min Recorded)

After adjusting the recording time, select O K. The Status bar will be displayed.

Total recording duration

Set Duration OK

No Change

Cancel

Stop Record

Elapsed recording time
Press the E X I T button to hide the Status bar. Press the O K button to display the Status bar.
Recording stops when the selected duration is reached or when you press the A button. Although recording has stopped, the Timeshift feature remains active.
When recording, if the available storage space becomes low, the recording will be automatically stopped. G Recordings of less than 10 seconds will not be saved. To save disk space while recording broadcasts, no G data will be saved if there is no signal. G The recording function will not initiate for a copyprotected programme. G The displayed time may differ slightly from the actual time. G In there is no signal or a film source is being viewed, the displayed time may differ slightly from the actual time.
Timeshift recording is not possible with copy-protected programmes.
Stop recording due to copy protection.
When a poor quality external source is recorded (old VHS tape for example) the quality of the recording will not be as good as it could be. G Programmes are stored separately according to the colour system that they are using. e.g. PAL/NTSC. G Manual Recording available time is maximum 4 hours and minimum 5 minutes.

MANUAL RECORD

This function is easy to register to reserved recording. This function is available to use in DVR menu. When Manual Record, its stored the default sound of the set.
MENU LIST MENU TIME SHIFT

LIVE TV EXIT TIME SHIFT

Press the D V R button to display H o m e menu. Use the D / E button to select the M a n u a l R e c o r d and then use the O K or G button.
Recorded TV Manual Record
M a n u a l R e c o r d screen is displayed as shown below. Use the D / E / F / G button to set the I n p u t, P R, D a t e, T i m e, D u r a t i o n, F r e q u e n c y.

Press the D V R button and then use D / E button to select the Photo List menu.

Photo List

USB Device

Drive1

UP Folder

Folder

File 1. jpg

File 2. jpg

File 3. jpg Menu Navigation OK

File 4. jpg Move Page

File 5. jpg Mark Exit
Displays the selected drive Moves to upper level file Current page/Total pages Total number of marked thumbnail photos Corresponding buttons on the remote control
Photo Selection and PopUp Menu
As shown, up to 6 thumbnail photos are listed per page.
Photo List USB Device Drive1 Page 2/3 No Marked
Use D / E / F / G buttons to select the target folder or drive then press O K.

File 3. jpg

File 4. jpg

File 5. jpg

Mark Exit
Use the P R + / - button to navigation in the thumbnail photo page.
Use the M A R K button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos. If no photos are marked, you can view all photos individually or all photos in the folder in a slide show.
Photo List USB Device Drive1
1024x768 720KB 1. jpg File

View Mark All Cancel

Use D / E / F / G button to navigation the appropriate thumbnail photos, then press the O K button to show the PopUp menu.
Menu Navigation Popup Menu
View : Display the selected item.
Mark All : Mark all photos on the screen. G Unmark All : Deselect all marked photos. G C a n c e l : Close the pop-up menu.
Set up the menu in Full-Sized Screen
You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen.

720KB 1. jpg File

Use the P R + / - button to navigation the thumbnail photo page.
Use D / E button to Move to the View menu, then press the O K button.
The selected photo is displayed in full size. Slide Show : When no picture is selected, all photos in the current folder are displayed during slide show. When selected, the selected photos are displayed during slide show. To start slide show, press O K button on.
1/12 Slideshow BGM Option Hide
The aspect ratio of a photo may change the size of the photo displayed on the screen in full size. 5
S the time interval of the slide show in Option. et
B G M : Listen to music while viewing photos in full size. To start BGM, press O K button on. I Set the BGM device and album in O p t i o n. (Rotate) : Rotate photos. Rotates the photo 90 clockwise upon O K button (Rotate). on

Option : Set values for Slide Speed and Music folde r. Use F / G button to select Option and press O K button. I Use F / G button and O K button to set values. Then go to and press O K to save the settings. I You cannot change M u s i c F o l d e r while BGM is playing. Hide : Hide the menu on the full-sized screen. Use F / G button to select H i d e and press O K button. I To see the menu again on the full-sized screen, press O K button to display.
Change slide speed using Slide Speed Music Folder

Fast Music

Use D / E / F / G button to select the previous or next photo. Use D / E / F / G button to select and control the menu on the full-sized screen.
Use E X I T button to go back to the photo list from the fullsized screen.
If it is Progressive JPEG format, some photos may be not decorded.
DVR (DIGITAL VIDEO RECORDER) MUSIC LIST
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit.
The On Screen Display may be different from your set. Images are an example to assist with the TV operation. Supports up to four drives.
MUSIC(*.MP3) supporting file Bitrate range 8Kbps ~ 320Kbps Sampling rate MPEG1 : 32000, 44100, 48000Hz MPEG2 : 16000, 24000, 22050Hz MPEG2.5 : 8000, 1 1025, 12000Hz
Press the D V R button and then use D / E button to select the Music List menu.

Music List Home

Page1/11
Displays the selected drive Moves to upper level file Current page/Total pages Current playing time/Total playing time Total number of marked musics Corresponding buttons on the remote control
Music Selection and PopUp Menu
As shown , up to 8 music titles are listed per page.
Music List USB Device Drive1 Page 1/1 No Marked
Use D / E / F / G buttons to select the target folder or drive then press O K. Use the P R + / - button to navigation in the music titles page. Use M A R K button to mark or unmark a music. When one or more music files are marked, the marked musics will be played in sequence. For example, if you want to listen to only one music repeatedly, just mark the music only and play it. If no music is marked, all the music in the folder will be played in sequence. Use D / E button to navigation the appropriate musics, then press the O K button to show up the pop-up menu. P l a y (During stop) : Play the selected musics. Once a music finishes playing, the next selected one will be played. When there are no selected musics to play, the next one in the current folder will be played. If you go to a different folder and press the O K button, the current music in playback will stop. G P l a y M a r k e d : Play the selected musics. Once a music finishes playing, the next selected one will be played automatically. G S t o p P l a y (During playback) : Stop the playing musics. G P l a y W i t h P h o t o : Start playing the selected musics and then move to the Photo List. G M a r k A l l : Mark all musics in the folder. G U n m a r k A l l : Deselect all marked musics. G C a n c e l : Close the pop-up menu.

Movie List USB Device Drive1 Page 1/1 No Marked
Use the P R + / - button to navigation in the movie titles page.
Menu Navigation OK Move Page Mark Exit
Use M A R K button to mark or unmark a movie. When one or more movie files are marked, the marked movies will be played in sequence. Use D / E button to navigation the appropriate movies, then press the O K button to show up the pop-up menu. Preview: Displays the preview video of the current file. G P l a y : Play the selected movie. Divx Play is executed while screen changes. G M a r k A l l : Mark all Movie in the folder. G U n m a r k A l l : Deselect all marked Movies. G C a n c e l : Close the pop-up menu.

Page 1/1

Movie List USB Device Drive1

Love. Act. No Marked

Preview Play Mark All Cancel
In the case of files not supported, a message regarding non-supported file is displayed.
DivX Audio Language & Subtitle Language
When DivX is playing, if you press the D i v X button, this message is displayed.
Choose from options below Audio Language
Press the D / E / F / G button to select the desired option. Supports up to Mpeg, Mp3, PCM, AC3 file.

Mpeg(1/1)

Subtitle Language - - - - (0/0)

Navigation OK

SUBTITLE
Turns the subtitle control during movie play.
Press the M E N U button and then use D / E button to select the D V R menu. Press the G button and then use D / E button to select Subtitle. Press the G button to start Subtitle.
SETUPO PICTURE O AUDIOO TIMEO OPTIONO DVR G TimeShift Mode Record Quality Recorded TV Schedule List Manual Record HDD Format DivX Reg. Code USB Backup USB HDD Format
button to select the desired subti-

tle option.

On Control Language

Off Sync Position

Control : Turns the position of the subtitle on and off during movie play. Language : Changes the Language Group of the subtitle during movie play. Sync : Adjusts the time synchronisation of the subtitle from -10 secs ~ +10 secs by steps of 1 secs during movie play. Position : Changes the position of the subtitle either up or down during movie play.

DIVX REGISTRATION CODE

Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.)
Press the M E N U button and then use D / E button to select the D V R menu.
SETUPO TimeShift Mode Record Quality Recorded TV Schedule List Manual Record HDD Format DivX Reg. Code DivX Reg. Code USB Backup USB HDD Format
Press the G button and then use D / E button to select DivX Reg. Code. Press the G button to start DivX Reg. Code.
DivX Registration Code : xxxxxxx

14:9 You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode. The screen 14:9 is viewed just like that the screen 4:3 is magnified to the left / right.

Original

Zoom1 Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bottom portions of the picture will be cropped.
Zoom2 Choose Zoom2 when you want the picture to be altered, both horizontally extended and vertically cropped. The picture taking a halfway trade off between alteration and screen coverage.
You can only select : 9 (Wide), 4 : 3, Zoom 1/2 in Component, HDMI(DTV) mode. You can only select : 9 (Wide), 4 : 3, in RGB/HDMI(PC) mode only. G You can select 4 : 3, : 9, Z o o m 1, Z o o m 2 in Recorded TV, Movie List, Play back mode only. G In Timeshift Delay/Recording Delay function, TV displays the aspect ratio of previous input mode. G It's available 16:9 when viewing a jpeg file in photo list.

PRESET PICTURE SETTINGS

Picture Mode-Preset
Dynamic Standard Mild User 1/2 Select this option to display with a sharp image. The most general and natural screen display status. Select this option to display with a mild image. Select this option to use the user-defined setting.
Press the M E N U button and then D / the PICTURE menu.
Press the G button and then D / Picture Mode.
Press the G button and then D / E button to select Dynamic, Standard, Mild, User 1 or User 2.
Dynamic Standard Mild User 1 User 2
Press the E X I T button to return to normal TV viewing. Picture Mode adjusts the TV for the best picture appear ance. Select the preset value in the P i c t u r e M o d e menu based on the programme category. Dynamic, Standard and Mild are programmed for optimum picture reproduction at the factory and cannot be changed.
Auto Colour Tone Control(Warm/Medium/Cool)
To initialize values (reset to default settings), select the Cool option. Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. U Its available to use this function in U s e r 1 / 2 of Picture mode only.

SIMPLE TEXT

Page selection
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. The P R +/- button can be used to select the preceding or following page.

TOP TEXT

The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block.
Block / group / page selection
With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group. Alternatively the P R + button can be used. The red button permits to return to previous selection. Alternatively the P R - button can be used.

Direct page selection

Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode.

FASTEXT

The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The P R +/- button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS

A REVEAL

Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display.

A SIZE

Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display.

A UPDATE

Displays the TV picture on the screen while waiting for the new teletext page. The display will appear at the top left hand corner of the screen. When the updated page is available then display will change to the page number. Press this button to view the updated teletext page.

A TIME

When viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the RED/GREEN, P R +/- or NUMBER buttons. Press again to exit this function.

A HOLD

Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited. To continue press this button again.

TROUBLESHOOTING

The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. I Are batteries installed with correct polarity (+ to +, - to -)? I Correct remote operating mode set: TV, VCR etc.? I Install new batteries.
The remote control doesnt work
Power is suddenly turned off
Is the sleep timer set? I Check the power control settings. Power interrupted I No broadcast on station tuned with Auto off activated.
The video function does not work. Check whether the product is turned on. Try another channel. The problem may be with the broadcast. I Is the power cord inserted into wall power outlet? I Check your antenna direction and/or location. I Test the wall power outlet, plug another products power cord into the outlet where the products power cord was plugged in.
No picture & No sound
P i c t u r e a p p e a r s s l o wly after switching on
This is normal, the image is muted during the product startup process. Please contact your service center, if the picture has not appeared after five minutes.
No or poor colour or poor picture
Adjust Colour in menu option. I Keep a sufficient distance between the product and the VCR. I Try another channel. The problem may be with the broadcast. I Are the video cables installed properly? I Activate any function to restore the brightness of the picture.
Horizontal/vertical bars or picture shaking Poor reception on some channels
Check for local interference such as an electrical appliance or power tool.
Station or cable product experiencing problems, tune to another station. Station signal is weak, reorient antenna to receive weaker station. I Check for sources of possible interference.

MGA MINOLTA MITSUBISHI

153 010
MTC MULTITECH NEC NORDMENDE OPTONICA PANASONIC

021 048

PENTAX PHILCO PHILIPS PILOT PIONEER PORTLAND PULSAR QUARTZ QUASAR RCA

REALISTIC

062 140

063 144

101 106

RICO RUNCO SALORA

125 SANSUI 022 SANYO SCOTT SEARS SHARP 031 SHINTOM 024 SONY 077 SOUNDESIGN 034 STS 013 SYLVANIA SYMPHONIC 034 TANDY 010 TATUNG 039 TEAC 034 TECHNICS 031 TEKNIKA THOMAS 034 TMK 006 TOSHIBA TOTEVISION 040 UNITECH 040 VECTOR RESEARCH 012 VICTOR 048 VIDEO CONCEPTS 012 VIDEOSONIC 040 WARDS 053 YAMAHA 012 ZENITH 034 058

131 101

043 101

Brand Codes

016 025
MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN

021 005

RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH
APEX DIGITAL 022 DENON 020 GE 005 HARMAN KARDON JVC 012 LG 001 MAGNAVOX 013 MARANTZ 024

026 006

IR CODES

1. How to Connect

Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes

Output waveform

Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency FCAR = 1/TC = fOSC/12 Duty ratio = T1/TC = 1/3

Configuration of frame

1st frame
Lead code Low custom code High custom code Data code Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7

Repeat frame

Repeat code

Lead code

9 ms 4.5 ms

0.55 ms

2.25 ms

Bit description Bit 0

0.56 ms

0.56 ms 2.24 ms

1.12 ms
Frame interval: Tf The waveform is transmitted as long as a key is depressed.

Tf Tf Tf=108ms @455KHz

Code (Hexa) 0F 08 0B 79 E0 E1 7E 0A B1 B0 BA BD B2 8F 8E B53 C8 9E 5B 01 1E 0E 1A 65 2A 91
Function TV POWER INPUT RATIO BRIGHTNESS + BRIGHTNESS SIMPLINK PIP TEXT I/II PIP PR-(RED) PIP PR+(GREEN) SWAP(YELLOW) PIP INPUT(CYAN) DVR STOP(A) DVR PLAY(G) DVR PAUSE(II) DVR REC(O) IFF
FF GG GGI MENU LIST DVR LIVE TV EXIT UP(D) DOWN(E) LEFT(F) RIGHT(G) OK( ) VOL + VOL PR + PR FAV/MARK MUTE Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 Number Key 0 SLEEP Q.VIEW SIZE POSITION INDEX TIME HOLD REVEAL DviX
Note R/C BUTTON R/C BUTTON(POWER ON/OFF) R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON R/C BUTTON