Ceiling Concealed Duct

Big Duct Model

Indoor Unit B120AH
Capacity Cooling Heating Input Running Current Power Supply E.E.R C.O.P Operational Temperature Range(Outdoor) Dehumidification Rate External Static Pressure Air Flow Rate Net Weight Noise Level(Sound Press, 1m) Dimensions (W*H*D) Net Weight Refrigerant Charge Compressor Outdoor Fan Noise Level (Sound Press, 1m) Pipe Connection Dimensions (W*H*D) Net Weight Power Supply Cable Interunit Cable Max length/Elevation Cooling Heating Cooling/Heating Cooling Heating Cooling Heating Btu/h W Btu/h W W W A ,V, Hz W/W W/W C C I/h mmAq CMM(CFM) kg(lbs) dB(A)3 mm kg(lbs) g(oz), type Type Side/Top dB(A)3 inch(mm) inch(mm) inch(mm) kg(lbs) No.*mm2 No.*mm2 m
112,000 32,825 130,000 38,100 14,500 12,500 24/21 3,380-415,50 2.26 3.05 -5~43 -10~24 10.0 7.6 (20) 105(3,780) 130(287) 53 1,600x720x800 130(287) 8,000(282.2), R410A Scroll Top Discharge 65 5/8(15.88) 1 (28.58) 300(661) 5*5.5 6*1.25 50/30 50.4x59.8x28.7(1,280x1,520x730)

Indoor Indoor Indoor

Discharge Outdoor Liquid Gas Outdoor Outdoor
Note : Due to our policy of innovation some specifications may be changed without notification.

B120AH

For continual product development, LG reserves the right to change specifications without notice. LG Electronics Inc. Printed in Korea January 2010

Features _ icon

Weekly Program

Turbo Fan

igh Head Drain Pump H

Low Standby Power

LG Commercial Air Conditioners 2010
Enjoy Clean, Quiet, and Comfortable Air Conditioning with LG.

Auto Restart

entral Controller(Accessory) C

roup Control G

Child Lock Function

Two Thermistor Control

uto Changeover A
Long & High Elevation Piping

ot Start H

Zone Control (Optional)
Wireless Remote Controller

J et Cool

Auto Operation
-Hour OFF Setting Timer 7
24-Hour ON/OFF Setting Timer

Duct Operation

CALOR SRL Str. Progresului nr. 30-40, sector 5, Bucuresti tel: 021.411.44.44, fax: 021.411.36.14 www.calorserv.ro - ofertare@calor.ro - www.calor.ro
Specifications, design and feature in this catalogue are subject to change without prior notice.

EU-CA109

LG Air Conditioners 2010

02 _03

Comfort Everyone in a Greener Way
Pursuing a more comfortable life in todays complicated society has become second nature. However, we cannot afford to compromise the health of the environment for our own personal comfort. In order to achieve a balance between these two needs, LG provides products and solutions for those who seek comfortable lives in a greener way; comfort and eco-friendliness are our key values. We at LG create optimal living and working conditions by enabling our customers to control their environment: including temperature, humidity and air quality to make them more comfortable. LG products are safe to operate and easy to manage and we provide our business partners with reliable and cost-effective solutions. Customer satisfaction motivates us to work closely and productively with our partners and we also offer a comprehensive after-sales and one-stop service system. LG is committed to protecting our environment by enhancing the energy efficiency of our products and our business operations by adhering to eco-friendly principles. LG has been significantly investing in R&D and pursuing continuous innovation to enhance product energy efficiency. LG uses eco-friendly refrigerants in its air conditioners, which help save the ozone layer and all LGs products are produced under an Eco-Design system, which ensures environmentally-friendly processes from production to disposal. LG is fully committed to making the lives of our customers more comfortable in an environmentally sustainable way and we strive to ensure our business partners benefit from partnering with us. Our commitment and innovation enable us to uphold our key values - Green and Comfort. With commitment and innovation, we comfort everyone our business partners and customers in a greener way.
E c o - D e s i g n , E ne r g y E f f i c i e n t , R ed u c e C O2 E m i s s i o n s
Energy Efficiency Class of The Unit In Cooling Mode :
Energy Efficiency Class of The Unit In Heating Mode :
Enjoy Clean, Quiet, and Comfortable Air Conditioning with LG
Ceiling Concealed Duct Type

Universal Indoor Type

Type kW 2.5 3.5 5.0 6.0 7.1 8.0 10.0 12.5 14.0(13.4*) 15.0

Ceiling Cassette Type

UT12H NP1 UT18H NP1 UT21H NN1 UT24H NN1 UT36H NM1 UT42H NM1 *UT48H NM1

UT09 NRD

UT12 NRD

UT18 NQD

UT24 NPD

UT30 NPD

UT36 NND

UT42 NMD

UT48 NMD

UT60 NMD

UB18H NG1

UB21H NG1

UB24H NG1

UB36H NR1

UB42H NR1

*UB48H NR1

UB18 NHD

UB24 NHD

UB30 NGD

UB36 NGD

UB42 NRD

UB48 NRD

UB60 NRD

Ceiling and Floor Type

UV09 NED

D UV12

UV18 NBD

UV24 NBD

UV30 NBD

UV36 NKD

UV42 NLD

UV48 NLD

UV60 NLD

Console Type* ACE

Inverter
*Only Connectable to DC Inverter CQ12 NA0 CQ18 NA0

CQ09 NA0

Universal Outdoor Type

Type kW

14.0(13.4*)

H-Inverter

UU12WH UE1

UU18WH UE1

UU21WH U41

UU24WH U41

UU36WH

UU42WH

*UU48WH

DC Inverter

UU09W ULD UU12W ULD UU18W UED UU24W UED UU30W UED UU36W UED UU42W U3D UU48W U3D UU60W U3D

3Phase DC Inverter

UU37W UED UU43W U3D UU49W U3D UU61W U3D

Heat Pump

UU12 ULD UU18 UED UU24 UED UU30 UED UU37 UED UU48 U3D UU60 U3D

Set Type

Type kW 14.0 21.1 32.8

Type kW 8.0 14.0 21.1

B120AH SV0

Floor Standing Type

P03AH SR1 P05AH ST0 P08AH SF1
*UU12WH UU36WH ~ ~ UU24WH UU48WH

Day time

Night Silent

Ceiling Concealed Duct

Hidden in the ceiling, this product is suitable for applications that require floor level or individual level air conditioning for buildings where there are many rooms or halls, such as restaurants, concert halls and hotels. Installation is not hindered by the location of lighting fixtures or room structure, and interior renovation is made easy with the installation of various ventilation diffusers.
5.50 5.00 4.50 4.00 3.50 3.00

2.66 2.53

COP Improved by 37%
Heat Pump Model (UB18 + UU18)
DC Inverter Model (UB18 + UU18W)

High Efficiency BLDC Fan

H-Inverter models can reduce operating noise and Save energy consumption with BLDC Fan 50% Reduction of Power consumption Low indoor Noise & Low vibration
* Based on 5.0kw Duct ** Test Condition : Fan mode
Noise Level [dB(A)] * Power Consumption(W)

ACE Inverter DC Inverter

Linear E.S.P. Control
Air volume and sound kept as design regardless of E.S.P change using this technology , you can Optimize duct work Installation Keep capacity & sound level as desired Simplify model numbers
*E.S.P is easily controlled by remote controller

High Head Drain Pump

Auxiliary Drain Pump automatically drains water. A standard drain-head height of up to 700mm is possible, creating the ideal solution for perfect water drainage. H-Inverter : High Head Drain Pump is Included in Indoor Unit
Drain Pipe Slope (1/50~1/100)

Fixture Drain pipe

450mm 700mm 300mm Flexible Drain Hose

(Accessory:ABDPG)

Two Thermistor Control
There may be a significant difference between the temperature taken at the installed product and indoor temperature. Two thermistor control provides option to control temperature by referring any of the two temperature. With the help of the slide switch at the back of the LCD wired remote controller, selection of the desired thermistor for controlling the unit can be done. One thermistor is in the Indoor unit & the other one is in the LCD wired remote.

LCD wired remote controller
Quiet Operation & Easy Service
A lightweight plastic blower and housing makes air conditioning operation quiet and backup servicing more convenient. The new fan housing can be easily dismantled for convenient servicing and maintenance. The fan motor can be removed without the need to remove the complete fan direct assembly.

Conventional

LG Fan and Housing

Heat pump

Big Duct Model
UB18 UB24 UB30 UB36 UB48 UB60

B120AH

Specifications
Nominal Capacity (Rated) Cooling EER Weight Piping Connections Btu/h
22,179 6.5 26,410 7.4 2.49 2.60 0./ 220 ~240 / 50 2.61 2.85 -5 ~ 43 -10 ~ 24 18/16.5/14 636/583/494 38/36/34 2.5
27,300 8.00 30,700 9.00 3.60 3.20 1./ 220 ~240 / 50 2.22 2.81 -5 ~ 43 -10 ~ 24 26.5/23/20 936/812/706 34/38/35 3.3 38(84) 9.52 (3/8) 15.88 (5/8) 32/25
34,100 10.0 37,500 11.0 4.00 3.60 1./ 220 ~240 / 50 2.50 3.06 -5 ~ 43 -10 ~ 24 32/29/26 1130/1024/918 42/39/36 4.0 38(84) 9.52 (3/8) 15.88(5/8) 32/25
46,700 13.70 54,600 16.00 5.84 5.20 3./ 220 ~240 / 50 2.35 3.08 -5 ~ 43 -10 ~ 24 40/35/30 1413/1236/1059 44/42/40 6.0 60(132) 9.52 (3/8) 15.88(5/8) 32/25
50,800 14.90 59,700 17.50 6.30 5.00 3./ 220 ~240 / 50 2.37 3.50 -5 ~ 43 -10 ~ 24 50/45/40 1766/1413/1236 46/44/42 6.5 62(137) 9.52 (3/8) 15.88(5/8) 32/25
880260450(34.610.217.7) 1180298450(46.511.717.7) 1180298450(46.511.717.7) 1230380590(48.415.023.2) 1230380590(48.415.023.2)
Body Liquid Gas Drain(OD/ID)
kg(lbs) mm(inch) mm(inch) mm
35(77.2) 9.52 (3/8) 15.88 (5/8) 32/25
Capacity Cooling Btu/h W Heating Btu/h W Input Cooling W Heating W Running Current Cooling/Heating A Power Supply ,V, Hz E.E.R Cooling W/W C.O.P Heating W/W Operational Temperature Cooling C Range(Outdoor) Heating C Dehumidification Rate I/h External Static Pressure(max) mmAq(inAq) Air Flow Rate(H/M/L) Indoor CMM(CFM) Net Weight Indoor kg(lbs) Noise Level(H/M/L) Indoor dB(A)3 Dimensions (W*H*D) Indoor mm Refrigerant Charge(at 7.5m) g(oz), type Compressor Type Outdoor Fan Discharge Side/Top dB(A)3 Noise Level (Sound Press, 1m) Outdoor Pipe Connection Liquid inch(mm) Gas inch(mm) Dimensions (W*H*D) Outdoor inch(mm) Net Weight Outdoor kg(lbs) Power Supply Cable No.*mm2 Interunit Cable No.*mm2 Max length/Elevation m
Note : Due to our policy of innovation some specifications may be changed without notification.
112,000 32,825 130,000 38,100 14,500 12,500 24/21
3,380-415,50 2.26 3.05 -5 ~ 43 -10 ~ 24 10.(0.79) 105/97/90 (3,708/3,426/3,179) 130(287) 53/51/49 1,600x720x800 8,000(282.2), R410A Scroll Top Discharge 65 5/8(15.88) 11/8 (28.58) 50.459.828.7(1,2801,520730) 300(661) 58.5 21.25 50/30
Dimensions _ Ceiling Concealed Duct
UB18 NHD ABNH186HLAD[UB18 UB24 NHD NHD] ABNH246HLAD[UB24 NHD]

UB42 NRD UB48 NRD UB60 NRD UB36H NR1 UB42H NR1 UB48H NR1

Model name

ABNH426RLAD[UB42 NRD] ABNH486RLAD[UB48 NRD] ABNH606RLAD[UB60 NRD]
ABNH426RLAD[UB42 NRD] ABNH486RLAD[UB48 NRD] ABNH606RLAD[UB60 NRD] 1 / 220 ~240 / 50 COMBINATION TABLE REFER TO EACH 9.52
ABNH186HLAD[UB18 NHD] ABNH246HLAD[UB24 NHD] 1 / 220 ~240 / / 220 ~240 / 50 REFER TO EACH

COMBINATION TABLE

(Unit:mm)

No. 5 6

Part Name 12.7 15.88 Air suction flange 32/25 32/25 Air discharge flange Control box Gas pipe connection Luquid pipe connection Drain pipe connection
Part Name Air suction flange Air discharge flange Control box Gas pipe connection Luquid pipe connection Drain pipe connection

12.5/14.0/15.0 kW

ABNH306GLAD[UB30 UB30 NGD NGD] ABNH366GLAD[UB36 NGD] 5.0/7.1 kW UB36 NGD UB18H NG1 UB21H NG1 UB24H NG1
ABNH306GLAD[UB30 NGD] ABNH366GLAD[UB36 NGD] 1/ 220~240 / / 220 ~240 / 50 REFER TO EACH
Part Name 32 / 35 Air suction flange Air discharge flange Control box Gas pipe connection Luquid pipe connection Drain pipe connection

32 / 35

Dimensions _ Universal Outdoor

OUTDOOR UNIT

5CSL0-05A

AUUW186D [UU18W UED]

Outdoor unit - DC Inverter SINGLE A (1, 3)
OUTDOOR UNIT AUUW216DH [UU21WH U4D] AUUW246DH [UU24WH U4D]

UU21WH U41 UU24WH U41

Remark
Part Name Air discharge grille Gas pipe connection Liquid pipe connection Power & transmission connection Earth screw SVC valve cover

Item No. 5

Part Name Air discharge grille Gas pipe connection Liquid pipe connection Power & transmission connection Earth screw

340 360

Technical Specification
Model name Power Supply AUUW216DH [UU21WH U4D] /V/Hz kW kW mm mm 1/ 220~240 / 50 AUUW246DH [UU24WH U4D] 1/ 220~240 / 50
Model name Power Supply /V/Hz kW kW mm mm AUUW186D[UU18W UED] 1/ 220~240 / 50
Cooling Capacity Heating Capacity Piping Connections Liquid Gas
Simultaneous operation Refer to combination table

9.52 15.88 9.52 15.88

6.35 12.7
1. Unit should be installed in compliance with the installation manual in the product box.
1. Unit should be installed in compliance with the installation manual in No. Part Name the product box.

4. Electrical characteristics chapter should be considered for electrical (Unit:mm) 6 SVC valve cover work and design. Especially the capacity of power cable and circuit breaker for outdoor unit should be more than that of electrical characteristics chapter.
3. All electrical components and materials to be supplied on the site 4 Power & Transmission connection must comply with thescrew regulations or international codes. local 5 Earth
2. Unit should be grounded in accordance with the local regulations or 2 Gas pipe connection applicable national codes.

3 Liquid pipe connection

Air discharge grille
3. All electrical components and materials to be supplied on the site must comply with the local regulations or international codes. No. (Unit:mm) characteristics chapter should be Part Name for electrical 4. Electrical considered 1 work and design. Especially the capacity ofAir discharge grille power cable and circuit 2 Gas pipe connection breaker for outdoor unit should be more than that of electrical characteristics chapter. 3 Liquid pipe connection
2. Unit should be grounded in accordance with the local regulations or applicable national codes.
Power & Transmission connection Earth screw
76, Seongsan-dong, Changwon City, Gyeongnam, 641-713, Korea www.lge.com/airconditioner

CHASSIS CODE: U4

Dimensions
Outdoor unit - DC Inverter SINGLE A (1, 3) 153

OUTDOOR UNIT UU18WH NE1

AUUW186DH[UU18WH UED]
CHASSIS CODE: UE OUTDOOR UNIT
OUTDOOR UNIT UU36WH U31 AUUW428D[UU43W U3D] UU42WH U31 AUUW488D[UU49W U3D] AUUW608D[UU61W U3D] UU48WH U31

No. 3 4

Part Name Air discharge grille Gas pipe connection Liquid pipe connection Power & transmission connection

Supporter

Model name Power Supply Cooling Capacity Heating Capacity Piping Connections Liquid Gas /V/Hz kW kW mm mm AUUW186DH[UU18WH UED] 1/ 220~240 / 50 4.04 Simultaneous operation Refer to combination table 13,800 9.52 15.88
Model name Power Supply Cooling Capacity Heating Capacity Piping Connections Liquid Gas /V/Hz kW kW mm mm
AUUW428D[UU43W U3D] AUUW488D[UU49W U3D] AUUW608D[UU61W U3D] 3/ 380~415 / 50 3/ 380~415 / 50 3/ 380~415 / 50

9.52 15.88

1. Unit should be installed in compliance with the installation manual in the product box. 3. All electrical components and materials toGas pipe connection be supplied on the site 2 must comply with the local regulations or international codes. 2. Unit should be grounded in accordance with the local regulations or 1 Air discharge grille applicable national codes.
No. Part Name 1. Unit should be installed in compliance with the installation manual in the product box. 1 Air discharge grille 2 Gas pipe connection 2. Unit should be grounded in accordance with the local regulations or applicable national codes. 3 Liquid pipe connection 3. All electrical components 4 materials& Transmissionon the site and Power to be supplied connection must comply with the local regulations or international codes. 5 Earth screw 6 4. Electrical characteristics chapter should becover SVC valve considered for electrical (Unit:mm) work and design. Especially the capacity of power cable and circuit breaker for outdoor unit should be more than that of electrical characteristics chapter.

Part Name

4. Electrical characteristics chapter should be considered for electrical 4 Power cable and circuit work and design. Especially the capacity of power & Transmission breaker for outdoor unit should be more than that of electrical characteristics chapter.

Liquid pipe connection

connection

2.1.4 Dimensions

UU09W UNIT OUTDOOR ULD AUUW096D[UU09W ULD] UU12W ULD

AUUW126D[UU12W ULD]

Remark No. 1 2

UU24W UED UU30W UED

AUUW246D[UU24W UED] AUUW306D[UU30W UED]
Model name Power Supply Cooling Capacity Heating Capacity Piping Connections Liquid Gas /V/Hz kW kW mm mm AUUW096D[UU09W ULD] 1/ 220~240 / 50 AUUW126D[UU12W ULD] 1/ 220~240 / 50 Simultaneous operation 6.35 9.52 Refer to combination table
Power Supply Cooling Capacity Heating Capacity Piping Connections Liquid Gas

/V/Hz kW kW mm mm

AUUW246D[UU24W UED] 1/ 220~240 / 50
AUUW306D[UU30W UED] 1/ 220~240 / 50
Refer to combination table

6.35 9.52

1. Unit should be installed in compliance with the installation manual in No. Part Name the product box. 1 Air discharge grille 2. Unit should be grounded in accordance with the local regulations or 2 Gas pipe connection applicable national codes. 3 3. All electrical components and materials Liquidsupplied on the site to be pipe connection 4. Electrical characteristics chapter 5 shouldEarth screw for electrical be considered (Unit:mm) work and design. Especially the capacity of power cable and circuit 6 SVC valve cover breaker for outdoor unit should be more than that of electrical characteristics chapter.
1. Unit should be installed in compliance with the installation manual in the product box. No. Part Name
5CSL0-05A Outdoor unit - DC Inverter SINGLE A (1, 3) Outdoor unit - DC Inverter SINGLE A (1, 3)
4 Power & Transmission connection must comply with the local regulations or international codes.
2. Unit should be grounded in accordance with the local regulations or 1 Air discharge grille applicable national codes.2 Gas pipe connection 3. All electrical components and materialspipe connectionon the site 3 Liquid to be supplied must comply with the local regulations or international codes. 4 Power & Transmission connection (Unit:mm) 4. Electrical characteristics chapter should be considered for electrical 5 Earth screw work and design. Especially the capacity of power cable and circuit 6 SVC valve cover breaker for outdoor unit should be more than that of electrical characteristics chapter.
CHASSIS CODE: UL OUTDOOR UNIT

UU18W UED

UU36W UED AUUW366D[UU36W UED] AUUW368D[UU37W UED] UU37W UED

Air discharge grille Gas pipe connection Liquid pipe connection Power & transmission connection Earth screw SVC valve cover
AUUW366D[UU36W UED] 1/ 220~240 / 50
AUUW368D[UU37W UED] 3/ 380~415 / 50
Simultaneous operation _Refer to combination table
No. Part Name 1. Unit should be installed in compliance with the installation manual in Air discharge grille the product box. 2. Unit should be grounded Gas pipe connection the local regulations or in accordance with Liquid pipe connection applicable national 3 codes.
1. Unit should be installed in compliance Part Name with the installation manual in No. the product box. 1 Air discharge grille 2. Unit should be grounded in accordance with the local regulations or 2 Gas pipe connection applicable national codes. 3 Liquid pipe connection 3. All electrical components and materials to be supplied on the site 4 must comply with the local regulationsPower & Transmission connection or international codes.

513 319

(Unit:mm) comply with the local regulations or international codes. 5 Earth screw must
4 3. All electrical componentsPower & Transmission connectionthe site and materials to be supplied on
6 SVC valve cover 4. Electrical characteristics chapter should be considered for electrical work and design. Especially the capacity of power cable and circuit breaker for outdoor unit should be more than that of electrical characteristics chapter.
5 Earth screw 4. Electrical characteristics chapter should be considered for electrical SVC power cable work and design. Especially the6capacity of valve cover and circuit breaker for outdoor unit should be more than that of electrical (Unit:mm) characteristics chapter.
Dimensions 150 AUUW426D[UU42W U3D] AUUW486D[UU48W U3D] AUUW606D[UU60W U3D]
No. Part Name Air discharge grille Gas pipe connection Liquid pipe connection Power & transmission connection Remark
Outdoor unit - Non inverter Single A (1, 3)
AUUH246D[UU24 UED] AUUH306D[UU30 UED]
AUUW426D[UU42W U3D] 1/ 220~240 / 50
AUUW486D[UU48W U3D] 1/ 220~240 / 50
AUUW606D[UU60W U3D] 1/ 220~240 / 50
9.52 15.88 9.52 15.88 9.52 15.88
UU42W U3D UU48W U3D UU60W U3D UU43W U3D UU49W U3D UU60W U3D

UU24 UED UU30 UED

AUUH246D[UU24 UED] 1, 220~240V, 50Hz
AUUH306D[UU30 UED] 1, 220~240V, 50Hz
1. Unit should be installed in compliance with the installation manual in the product box. 2. Unit should be grounded in accordance with the local regulations or applicable national codes.

4. Electrical characteristics chapter should be considered for electrical work and design. Especially the capacity of power cable and circuit breaker for outdoor unit should be more than that of electrical characteristics chapter.
3. All electrical components and materials to be supplied on the site must comply with the local regulations or international codes.

AUUH126D

No. Part Name 1 Air discharge grille [UUULD]Gas pipe connection 3 Liquid pipe connection 4 Power & Transmission connection

AUUH368D[UU37 UED]

Part Name Air discharge grille Gas pipe connection Liquid pipe connection Power & Transmission connection Earth screw SVC valve cover

1) Outdoor unit

2.3.4 Dimensions

UU12 ULD

UU37 UED
AUUH126D[UU12 ULD] 1/ 220~240 / 50
AUUH368D[UU37 UED] 1, 220~240V, 50Hz
Part Name Air discharge grille 3. All electrical components and materials to be supplied on the site 2 Gas pipe connection must comply with the local regulations or international codes. 3 Liquid pipe connection 4. Electrical characteristics chapter should be considered for electrical 4 Power & Transmission connection work and design. Especially the capacity of power cable and circuit breaker for outdoor unit should be more than that of electrical 5 Earth screw characteristics (Unit:mm) chapter. 6 SVC [UU18 UED] AUUH186D valve cover
2. Unit should be grounded in accordance with the local regulations or 1 applicable national codes.

UU18 UED

AUUH488D[UU48 U3D] AUUH608D[UU60 U3D]

UU48 U3D UU60 U3D

AUUH186D[UU18 UED] 1, 220~240V, 50Hz
Model name Power Supply Cooling Capacity Heating Capacity Piping Connections Liquid Gas /V/Hz kW kW mm mm AUUH488D[UU48 U3D] 3, 380~415V, 50Hz AUUH608D[UU60 U3D] 3, 380~415V, 50Hz
2 Gas pipe connection 2. Unit should be grounded in accordance with the local regulations or 3 Liquid pipe connection applicable national codes. 4 Power & site 3. All electrical components and materials to be supplied on the Transmission connection must comply with the local regulations or international codes. 5 Earth screw 4. Electrical characteristics chapter should be 6 considered for electrical SVC valve cover (Unit:mm)

work and design. Especially the capacity of power cable and circuit breaker for outdoor unit should be more than that of electrical characteristics chapter.
1. Unit should be installed in compliance with the installation manual in 1 Air discharge grille the product box.
Part Name Air discharge grille Gas pipe connection Liquid pipe connection Power & Transmission connection

CHASSIS CODE: U3

Dimens