DOORKING VEHICULAR GATE OPERATORS Rev 6/08
MODEL 6100 Swing Gate Operator
For gates up to 14-feet wide, 500 Lb. maximum gate weight The model 6100 swing gate operator is designed to operate vehicular swing gates in residential and commercial applications. These operators can be installed on mounting posts or directly onto a concrete mounting-pad.

Standard Features

1/2 HP continuous duty motor For gates up to 14-feet wide, 500 Lb. Includes Primary and Built-in Secondary entrapment prevention system Self-adjusting, maintenance free limits Programming switches allow you to set desired mode of operation Keyed release for manual operation Fail-safe design Auto-close timer Plug-in loop detectors Overlap feature for bi-parting gate operation Gate Tracker reporting output provides operator data to access control system*
(*DKS systems with card access only)

POST MOUNT

5-year limited warranty 10F to 140F (-12C to 62C)

Options

PAD MOUNT
Available for single or dual gates Bi-parting gate connection cable (second operator
includes 40-feet of cable)
Post or Pad mounting options DC Powered convenience open Gate operator control stations Heater kit (recommended when temperature routinely falls below 32F (0C). Secondary entrapment prevention devices Plug-in loop detectors. Swing gate accessories

Dimensions

6100 - Standard 13.25w x 12H x 23L 6100 w / Convenience Open 13.25W x 12H x 28L Post Mount X Dimension: Variable by Installation Pad Mount X Dimension: 10

Shipping Weight

82 Lbs. 102 Lbs. 44 Lbs. 42 Lbs.
Class: I, II, III, IV Class: I, II, III, IV
115 VAC, 60 Hz 1/2 HP: 5.4 A 115 VAC, 60 Hz 1/2 HP: 5.4 A

www.leedan.com

info@leedan.com

Toll-Free: 800-231-1414

6100 Swing Gate Operator Assemblies List Price
Description Single Gate (Pri Operator + Hardware Kit) Dual Gate (Pri + Sec Operator + 2 Hardware Kits) Single Gate w/ DC Open (Pri Operator + Kit) Dual Gate w/ DC Open (Pri + Sec Operator + 2 Kits) (Note 1) (Note 2) (Note 3) (Note 4) Order using P/Ns below.
6100 Swing Gate Operator Components
P/N 6100-080 6100-081 6100-082 6100-083 2600-674 2600-671 Description 1/2 HP Primary Operator, 115 VAC 1/2 HP Secondary Operator 1/2 HP Primary Operator, 115 VAC w/ DC Open 1/2 HP Secondary Operator w/ DC Open Hardware Kit for Post Mounted Operator Hardware Kit for Pad Mounted Operator (Note 7) (Note 5) (Note 6) (Note 7)

Accessories

P/N 9409-010 9410-010 1601-154 Description DoorKing plug-in 2-channel detector. Use with DKS operators only. DoorKing plug-in single channel detector. Use with DKS operators only. Heater Kit Heater kit for operators installed in cold weather environments. Built-in fan and thermostat.
To Order: Select an operator(s) AND hardware kit(s). Hardware Kit(s) Must Be Ordered with the Operator(s). Hardware kits include drive arm and extension arm, arm mounting brackets, arm joint and mounting configuration (post or pad) hardware. Notes: (1) Price includes Primary operator and respective hardware kit. (2) Price includes Primary and Secondary operators, two hardware kits and 30-ft of interconnection cable. (3) Price includes Primary operator with DC Convenience Open and respective hardware kit. (4) Price includes Primary and Secondary operators with DC Convenience Open, two hardware kits and 30-ft of interconnection cable. (5) Includes two 2-1/2 inch (O.D.) mounting posts and necessary hardware. (6) Includes mounting base and necessary hardware. (7) Secondary operator must be used with a primary operator.