DV480.90.82.92-E.BDEULLK4307ENG

1/23/09

1:49 PM

Page 1

DVX480 / DVX490 / DVX482 / DVX492
As an ENERGY STAR Partner, LG has determined that this product or product models meet the ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.

ENGLISH

P/No. : MFL61304307

Page 2

Safety Precaution

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products shall be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. This product is manufactured to comply with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. European representative : LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +310365478940)

Page 3

About the
Safety Precaution.2 Types of Playable Discs.3 Hooking up the unit.4 Remote Control.5 Main Unit.6 Adjust the settings.7-8 Displaying Disc Information.8 Playing a Disc.9-10 Playing a DivX movie file.10 Listening to Music Disc or files.11 Viewing photo files.12 USB Direct Recording (DVX482/DVX492 only).13 Using an USB Flash Drive (DVX482/DVX492 only).13 Language Codes.14 Area Codes.14 Troubleshooting.15 Specifications.15

Symbol Display

may appear on your TV display during operation and indicates that the function explained in this owners manual is not available on that disc.

Table of Contents

Regional Codes
This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or ALL. Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your units regional code or the disc cannot play. If you try to play a DVD with a different regional code from your player, the message Check Regional Code appears on the TV screen.

Copyrights

It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DVD Logo is a trademark of DVD Format/Logo Licensing Corporation.

Types of Playable Discs

DVD-VIDEO: Discs such as movies that can be purchased or rented. DVD-R: Video mode and finalized only DVD-RW: VR mode, Video mode and finalized only DVD+R: Video mode only DVD+RW: Video mode only Audio CD: Music CDs or CD-R/CD-RW in music CD format that can be purchased. This unit plays DVDR/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVDRW/DVDR or CD-RW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software.

Page 4

Hooking up the unit
Audio and Video Connection
The unit Audio/Video jacks are color coded (yellow for video, red for right audio and white for left audio). If your TV has only one input for audio (mono), connect it to the left (white) audio jack on the unit.
Hooking up the unit - more you can do

A SCART connection

Connect the TO TV jack on the unit and your TV using the SCART cable. Caution : You must set the [TV Output Select] option to [RGB] on the setup menu to use this connection. (See page 7)
B Component Video Connections
Connect the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit to the corresponding input jacks on your TV using a YPBPR cable. You will still need to connect the left and right audio cables to the TV, or digital audio cable to your stereo. If your TV accepts progressive format signals, you must use this connection and set [Progressive Scan] to [On] on the setup menu. (See page 7) Caution : You must set the [TV Output Select] option to [YPbPr] on the setup menu to use this connection. (See page 7) Rear of TV
C Digital Audio Output Connection
Connect one of the units DIGITAL AUDIO OUTPUT (COAXIAL) jack to the corresponding jack on your amplifier. If the audio format of the digital output does not match the capabilities of your amplifier, the amplifier will produce a strong, distorted sound or no sound at all. To see the audio format of the current disc in the on-screen display, press AUDIO. This unit does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this unit to a DTS compatible amplifier via one of this units digital audio outputs.

Rear of DVD player

Connect the AC power cord into the power outlet.

Page 5

Remote Control
POWER (1) Switches the unit ON or OFF. OPEN/CLOSE Opens and closes the disc tray. CLEAR Removes a track number on the Program List. PROGRAM Enters the program edit mode. Numerical buttons Selects numbered options in a menu.
SCAN (m / M) Search backward or forward. SKIP (. / >) Go to next or previous chapter/track/file. PAUSE/STEP (X) Pauses playback temporarily/ press repeatedly for frame-by-frame playback. PLAY (N) Starts playback. STOP (x) Stops playback. DVD MENU Accesses or exits the DVD menu.
TITLE Access the discs title menu. vV b B Navigates the menus. ENTER ( ) Confirms menu selection.
DISPLAY Accesses or exits On-Screen Display. AUDIO ( ) Selects an audio language or audio channel. SUBTITLE ( ) Selects a subtitle language. ANGLE ( ) Selects a DVD camera angle, if available. SETUP Accesses or exits the setup menu.
RETURN (O) Returns to previous in menu or exits the menu. A-B Repeats a section. REPEAT Repeats a chapter, track, title or all. ZOOM Enlarges video image.
Put the battery into the Remote Control Remove the battery cover on the rear of Remote Control, and insert battery (size AAA) with + and matched correctly.

Button is not available.

Page 6

Main Unit

DVX480 / DVX482

a b c d e f g

DVX490 / DVX492

b c g a f e d

a Power Turn the unit ON or OFF. b Disc Tray Insert a disc here. c Z (Open / Close) Opens or closes the disc tray. d Display window Shows the current status of the unit. e Remote sensor Point the remote control here.
f USB Port (DVX482/DVX492 only) Connect an USB Flash Drive. g N (Play) Starts playback. x (Stop) Stops playback. . (Skip) Returns to the beginning of current chapter/track/file or go to the previous chapter/track/file. > (Skip) Go to next chapter/track/file.

Page 7

Adjust the settings

ON REMOTE

1 Display setup menu: 2 Select a desired option on the first level: 3 Move to second level: 4 Select a desired option on the second level: 5 Move to third level: 6 Change the setting: SETUP

vV B vV B v V / ENTER

Display Mode If you selected 4:3, youll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. Progressive Scan (For Component Video connections) Selects whether the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks output progressive signal. If your TV accepts progressive format signals, you will enjoy accurate color reproduction and high quality image by selecting [On]. If your TV does not accept progressive format signals, select [Off]. If you set Progressive Scan to [On] in error, you must reset the unit. First, remove the disc in the unit. Next, press and hold STOP for five seconds. The video output will be restored to the standard setting, and a picture will be visible on your TV. TV Output Select Select an option according to the TV connection type. [RGB]: When your TV is connected with the SCART jack. [YPbPr]: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN OUTPUT jacks on the unit.
Adjust the settings - more you can do
When you turn on for the first time (optional)
The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use b B to select [Enter] then press ENTER.
Adjust the audio settings
Dolby Digital / DTS / MPEG Selects the type of digital audio signal when using the DIGITAL AUDIO OUTPUT jack. [Bitstream]: Select this when you connect this units DIGITAL AUDIO OUTPUT jack to an amplifier with a built-in Dolby Digital, DTS or MPEG decoder. [PCM] (for Dolby Digital / MPEG): Select this when you connect this units DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in Dolby Digital or MPEG decoder. [Off] (for DTS): Select this when you connect this units DIGITAL AUDIO OUTPUT jack to an amplifier without a built-in DTS decoder. Sample Freq. (Frequency) Selects the sampling frequency of the audio signal. [48 KHz]: The audio signals are always converted to 48 kHz. [96 KHz]: The audio signals are output in their original format. DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal Set to [On] only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound.

Adjust the language settings
Menu Language Select a language for the Setup menu and on-screen display. Disc Audio/Subtitle/Menu Select a language for the Disc Audio/Subtitle/ Menu. [Original]: Refers to the original language in which the disc was recorded. [Other]: To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list. (see page 14) If you make a mistake while entering number, press CLEAR to delete numbers then correct it. [Off] (for Disc Subtitle): Turn off Subtitle.
Adjust the display settings
TV Aspect Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected.

Page 8

Adjust the lock settings
You must set the [Area Code] option to use the lock options. Select [Area Code] option then press B. Enter a 4-digit password then press ENTER. Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then correct it. If you forget your password you can reset it. First, remove the disc in the unit. Display setup menu then input the 6-digit number 210499. The P CLr appear in the display window and the password is deleted. Rating Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. Password Sets or changes the password for lock settings. [New]: Enter a new 4-digits password using the numerical buttons then press ENTER. Enter the password again to confirm. [Change]: Enter the new password twice after entering the current password. Area Code Select a code for a geographic area as the playback rating level. This determines which areas standards are used to rate DVDs controlled by the parental lock. (See page 14)
Displaying Disc Information
1 Press DISPLAY: 2 Select a item: 3 Adjust the Display menu settings: 4 To return the exit: DISPLAY

vV b B / ENTER

DISPLAY
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by pressing b B or using the numbered buttons (0-9). Current title (or track) number/total number of titles (or tracks) Current chapter number/total number of chapters Elapsed playing time Selected audio language or channel Selected subtitle Selected angle/total number of angles

Adjust the others settings
B.L.E. (Black Level Expansion) To select the black level of playback pictures. Set your preference and monitors ability. DivX(R) VOD We provide you with the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. Press ENTER when [Select] icon is highlighted and you can view the registration code of the unit. All the downloaded videos from DivX VOD can only be played back on this unit. REC Bitrate (DVX482/DVX492 only) You can choose a bitrate for USB direct recording (96 kbps or 128 kbps). Higher bitrate gives the better sound quality but uses more space on the USB Flash Drive. For USB direct recording. (see page 13)
Symbol Used in this Manual

ALL DVD MP3 WMA

All discs and file listed below DVD and finalized DVDR/RW MP3 files WMA files

ACD CD-G DivX

Audio CDs CD-G discs DivX files

Page 9

Playing a Disc
1 Open the disc tray: 2 Insert a Disc: 3 Close the disc tray: 4 Start playback: 5 To stop playback: Z Z N x OPEN/CLOSE PLAY STOP OPEN/CLOSE

Pause a playback

Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue playback.

Frame-by-Frame playback

Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.

Playing repeatedly

Press REPEAT repeatedly to select an item to be repeated. The current title, chapter, track or all will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [Off].
Playing a Disc - more you can do

Stops the playback

x The unit records the stopped point depending on the disc. Xx appears on the screen briefly. Press PLAY ( N) to resume playback (from the scene x point). If you press STOP (x ) again or unload the disc ( x appears on the screen), the unit will clear the stopped point. X (Xx =Resume Stop, x =Complete Stop) The resume point may be cleared when a button is pressed (for example :POWER, OPEN/CLOSE, etc).
Fast forward or fast reverse

DVD DivX ACD WMA MP3

Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY ( N) to continue play at normal speed.
- DVD, DivX: mmb P mm P mb P m / M p MB p MM p MMB - ACD, WMA, MP3: mx8 P mx4 P mx2 / Mx2 p Mx4 p Mx8
Repeating a specific portion (A-B)
Playing a DVD that has a menu
Press A-B at the beginning of the portion you wish to repeat and again at the end of the portion. Your selected portion will be repeated continually. To return to normal playback, press A-B to select [Off].
Most DVD now have menus which load first before the film begins to play. You can navigate these menus using vV b B or number button to highlight an option. Press ENTER to select.

Selecting a subtitle language
During playback, press SUBTITLE ( language.
) repeatedly to select a desired subtitle

Playing a DVD VR disc

This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. When you insert a disc DVD VR disc, the menu will appear on the screen. Use vV to select a title then press PLAY ( N). To display DVD-VR menu, press DVD MENU or TITLE. Some DVD-VR disc are made with CPRM data by DVD RECORDER. Player does not support these kinds of discs.
Watching from a different angle
If the angle indicator appears on the screen for a moment, you can select a different camera angle by pressing ANGLE ( ) repeatedly.
Hearing a different audio
Skip to the next/previous chapter/track/file
During playback, press AUDIO ( ) repeatedly to switch between the available audio languages, channels or encoding methods.
Press SKIP (>) to move to the next chapter/track/file. Press SKIP (.) to return to the beginning of the current chapter/track/file. Press SKIP (.) twice briefly to step back to the previous chapter/track/file.
Slow down the playing speed

(Forward only)

While playback is paused, press SCAN (M) to slow down forward playback. You can change the various playback speed by pressing SCAN (M) repeatedly. Press PLAY ( N) to continue play at normal speed.

Page 10

Watching an enlarged video image
During playback or pause mode, press ZOOM repeatedly to select zoom mode. You can move through the zoomed picture using vVb B buttons. Press CLEAR to exit. (100% p 200% p 300% p 400% p 100%)
Playing a DivX movie file
1 Open the disc tray: Z Z OPEN/CLOSE v V, DVD MENU OPEN/CLOSE 2 Insert a disc: 3 Close the disc tray: 4 Select a movie file from the menu:
To go directly to file and play, enter the file number using the numbered buttons (0-9).

Viewing the title menu

Press TITLE to display the disc's title menu, if available.

Viewing the DVD menu

Press DVD MENU to display the disc menu, if available.
Starting play from selected time
5 Start playback: 6 To stop playback:

PLAY STOP

Searches for the starting point of entered time code. Press DISPLAY then select clock icon. Enter a time then press ENTER. For example, to find a scene at 1 hour, 10 minutes, and 20 seconds, enter "11020" and press ENTER. If you enter the wrong number, press CLEAR to enter again.
Playing a DivX movie file - more you can do
Changing the character set to display DivX subtitle correctly

N PLAY x STOP

Listening to Music Disc or files - more you can do
Creating your own program
You can play the contents of a disc in the order you want by arranging the order of the musics on the disc. To add a music(s) on the program list, press PROGRAM to enter the program edit mode ( E mark appears on the menu). Select a desired music on the [List] then press ENTER to add the music to the program list. Select a music from the program list then press ENTER to start programmed playback. To clear a music from the program list, select the music you want to clear then press CLEAR in program edit mode. To clear all music from the program list, select [Clear All] then press ENTER in program edit mode. The program is cleared when the disc is removed or the unit is turned off.

Playing a CD-G disc

Once you insert an CD-G disc, a menu appears on the screen. Use vV to select a track then press PLAY ( N). To display the CD-G menu during x playback, press STOP (x ) twice. You can display the setup menu by pressing SETUP only when CD-G menu appears on the TV screen.

Page 12

Viewing photo files
Open the disc tray: Insert a disc: Close the disc tray: Select a photo file on the menu:
Watching a enlarged photo image
While viewing a photo in full screen, press ZOOM repeatedly to select zoom mode. You can move through the zoomed photo using vVb B buttons. Press CLEAR to exit.

Photo file requirement

JPEG file compatibility with this unit is limited as follows: File extensions:.jpg Photo size: Less than 2M recommended CD-R/RW, DVDR/RW Format: ISO 9660 Maximum Files/Folders: Less than 600 (total number of files and folders)
5 Display the selected file in full screen: 6 To return to the menu:
Viewing photo files - more you can do
Viewing photo files as a slide show
Use vV b B to highlight ( ) icon then press ENTER to start slide show. You can change slide show speed using b B when ( ) icon is highlighted.

Skip to the next/previous photo
Press SKIP (. or >) to view the previous/next photo.

Rotate a photo

Use vV to rotate the photo in full screen counterclockwise or clockwise while viewing a photo in full screen.

Pause a slide show

Press PAUSE/STEP (X) to pause a slide show. Press PLAY ( N) to continue the slide show.
Listening to music during slide show
You can listen to music during slide show, if the disc contain music and photo files together. Use vV b B to highlight ( ) icon then press ENTER to start slide show.

Page 13

USB Direct Recording (DVX482/DVX492 only)
Connect USB Flash Drive to the unit before recording. Set [REC Bitrate] option to [96 kbps] or [128 kbps] as required. (See page 8)
1 Insert an Audio CD: 2 Select a track:
To go directly to track and play, enter the track number using the numbered buttons (0-9).
The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recording, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Be responsible Respect copyrights

v V, DVD MENU

Using an USB Flash Drive

(DVX482/DVX492 only)

You can play MP3/WMA/JPEG/DivX in the USB Flash Drive with version 2.0/1.1.
3 Start recording: 4 To stop recording: Recordable mode x

AUDIO STOP

1 Connect an USB Flash Drive to the USB port on the unit: 2 Display the menu screen in stop mode: 3 Select a file:
You can record one desired track or all of the tracks in Audio CD to USB Flash Drive. For track recording: Press AUDIO in play, pause or resume stop mode. For disc recording: Press AUDIO in complete stop mode. For program list recording: In stop mode, press AUDIO after selecting a track on the program list.

RETURN

4 Play the file: 5 Remove the USB Flash Drive: Notes an USB Flash Drive
Notes an USB direct Recording
The recording is available only for Audio CD tracks. If you use this function, the CD_REC folder will be created automatically in the USB Flash Driver then the music file(s) is saved in it. If you remove USB Flash Drive, turn off or open the unit while recording, it can make a malfunction. During the recording is no sound. If the remaining space on the USB Flash Drive is insufficient, the recording is not available. To increase the free space, delete files in it using your PC. CD-G disc and Audio CDs encoded in DTS cannot be recorded. External HDD, Multi Card Reader, Multi Partition USB, Locked device and MP3 player is not supported. Recording format: MP3 file Encoding Bitrate: 96 kbps / 128 kbps Maximum Files/Floders: Less than 600 (total number of files and folders)

O You can switch USB and DISC mode by pressing RETURN (O) only in stop mode. Do not extract the USB device in operating. Regular back up is recommended to prevent data loss. If you use a USB extension cable or USB HUB, the USB device might not be recognized. Music files (MP3/WMA), photo files (JPEG) and DivX files can be played. For details of operations on each files, refer to relevant pages. This unit is not supported when the total number of files is more than 600. Bit rate: within 8 - 320 kbps (MP3), within 32 - 192 kbps (WMA), less than 4Mbps (DivX file) The USB function of this unit does not support all kinds of USB devices. Digital camera and mobile phone are not supported. USB port of the unit can not be connected to PC. The unit can not be used as a storage device.

Page 14

Language Codes
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali, Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code 9072 Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code 7185 Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code 8084 Language Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code 8476 Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapk Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 9085

Area Codes

Choose a area code from this list.
Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code GL HK HU IN ID IL IT JM JP KE KW LY LU MY Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Code MV MX MC MN MA NP NL AN NZ NG NO OM PK PA Area Paraguay Philippines Poland Portugal Romania Russian Federation Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code PY PH PL PT RO RU SA SN SG SK SI ZA KR ES Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code LK SE CH TW TH TR UG UA US UY UZ VN ZW

Page 15

Troubleshooting

Symptom

No power.

Specifications

Cause Correction
Plug the power cord into the wall outlet securely. Insert a disc. Net Weight (Approx.) Operating temperature Operating humidity Laser Signal system

General

Power requirements Power consumption Dimensions (Approx.) AC 200-240V, 50/60 Hz 8W 430 x 35 x 200 mm (W x H x D) without foot 1.6 kg 5 C to 35 C 5 % to 90 % Semiconductor laser PAL/NTSC
The power cord is disconnected.
The power is on, but the unit does not work. No picture.

No disc is inserted.

The TV is not set to receive the signal from the unit. The video cable is not connected securely.
Select the appropriate video input mode on the TV. Connect the video cable securely.

Inputs

USB IN (DVX482/DVX492 only) 4 pin (USB 2.0 / 1.1 standard)

No sound.

The equipment connected with the audio cable is not set to receive the signal from the unit. The AUDIO options are set to the wrong position.
Select the correct input mode of the audio amplifier.

Outputs

Video Output Component Video Output 1.0 V (p-p), 75 , sync negative, RCA jack x 1 / SCART (TO TV) (Y) 1.0 V (p-p), 75 , sync negative, RCA jack x 1, (Pb)/(Pr) 0.7 V (p-p), 75 , RCA jack x 2 2.0 Vrms (1 KHz, 0 dB), 600 , RCA jack (L, R) x 1 / SCART (TO TV) 0.5 V (p-p), 75 , RCA jack x 1
Set the AUDIO settings to the correct position. Insert a playable disc. (Check the disc type and regional code.) Change the rating level. Point the remote control at the remote sensor of the unit. Operate the remote control closer to the unit.
The unit does not start playback.
An unplayable disc is inserted.
Audio Output Digital Output (Coaxial)
The rating level is set. The remote control does not work properly. The remote control is not pointed at the remote sensor on the unit. The remote control is too far from the unit.

Accessories

Video/Audio cable, Remote Control, Battery
Designs and specifications are subject to change without prior notice.