LASYSTEMS - Brusselsesteenweg 208 - 1730 Asse - Belgium
Phone: +32-2-4531312 - Fax: +32-2-4531763 E-mail: info@lasystems.be

Lg FBD203 (FBD203)

Price details:
Price excl. VAT: 172.95 Eco fees: 0.00 VAT 21 %: 36.32
PDF generated on: 8 June, 2011

Product details:

Product code: FBD203 EAN: 8801031856800 Manufacturer: LG

209.27

* VAT included / Main specifications:
Product is discontinued. You can not order it anymore.
RMS rated power: Audio compression formats: 200 W MP3, WMA JPEG Y Y Y Y Y 2 pcs 1 Black Mini set

Still image

Supported image formats:

Media types

CD player: MP3 playback: DVD Audio playback: CD-R playback: CD-RW playback:

Loudspeakers

Number of loudspeakers:

Connectivity

USB 2.0 ports quantity:

Colour

Colour of product:

Technical details

*PLEASE NOTE: Every effort has been made to ensure the accuracy of all information contained herein. Lasystems makes no warranty expressed or implied with respect to accuracy of the information, including price, editorials or specifications. Lasystems or its suppliers shall not be liable for incidental, consequential or special damages arising from, or as a result of, any electronic transmission or the accuracy of the information contained herin, even if Lasystems has been advised of the possibility of such damages. Product and manufacturer names are used only for the purpose of identification.

DVD Mini Hi-Fi System ] USER GUIDE

Page 3

Types of Playable Discs
DVD-VIDEO: Discs such as movies that can be purchased or rented. DVD-R: Video mode and finalized only DVD-RW: Video mode and finalized only DVD+R: Video mode only Supports the double layer disc also DVD+RW: Video mode only Audio CD: In addition, this unit can play a DVDR/RW and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG files. Depending on the conditions of the recording equipment or the CD-R/RW (or DVDR/RW) disc itself, some CD-R/RW (or DVDR/RW) discs may not be played on the unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. The disc will not play if it has not been correctly finalized. Player does not support these kinds of discs.

About the

Symbol Display
may appear on your TV display during operation and indicates that the function explained in this owners manual is not available on that specific DVD video disc.

Regional code

This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or ALL. Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your units regional code or the disc cannot play. If you try to play a DVD with a different regional code from your player, the message Check Regional Code appears on the TV screen.

Copyrights

It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE STANDARD DEFINITION OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p UNIT, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories.

Page 4

Welcome to your new DVD Mini Hi-Fi System
Contents Safety Precaution.2 Types of Playable Discs.3 Setting up.5 Main Unit.6 Hooking up the unit -I.7 Hooking up the unit -II (Optional).8 Remote control.9 OSD Initial language setting(Optional).10 Initial Setting the Area Code(Optional).10 Adjust the setting.10-11 Displaying Disc Information.12 Setting the clock.12 Use your player as an alarm clock.12-13 Setting the sound mode.13 Playing a Disc.14 Playing a DivX Movie file.15 Listening to Audio CD,MP3 or WMA files.15-16 Viewing photo files.16-17 Listening to the radio.17 Listening to music from your portable player.18 Connecting your portable USB player USB DIRECT RECORDING. Language Codes. Area Codes. Troubleshooting. Specifications.18.19.20.20.21.22
Power Save Mode You can set up the unit into an economic power save mode. In power-on status, press and hold 1 (STANDBY/ON) button for about 3 seconds. - Nothing is displayed in the display window when the unit is turned off. To cancel, press 1 (STANDBY/ON) , CLOCK, TIMER.
Precautions in using the touch buttons Use the touch buttons with clean and dry hands. - In a humid environment, wipe out any moisture on the touch buttons before using. Do not press the touch buttons hard to make it work. - If you apply too much strength, it can damage the sensor of the touch buttons. Touch the button that you want to work in order to operate the function correctly. Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions.

Page 5

Setting up
Attaching the speakers to the unit
Connect the wires to the unit.
Match each wires coloured band to the same coloured connection terminal on the reverse of the unit. To connect the cable to the unit, press each plastic finger pad to open the connection terminal. Insert the wire and release the finger pad
The connector will open ready to receive a cable.
Connect the red end of each wire to the terminals marked +(plus) and the black end to the terminals marked - (minus).

COLOUR

Red White

SPEAKER

Front Front

POSITION

In front of you, to the right of the screen In front of you, to the left of the screen
Remote control Operation Point the Remote Control at the remote sensor and press the buttons. Remote control Battery Installation Detach the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with 3 and # aligned correctly. Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).
Be careful of the following Be careful to make sure children not to put their hands or any objects into the speaker duct. Speaker duct : A hall for plentiful bass sound on speaker cabinet (enclosure).

Page 6

Main unit
1 (STANDBY/ON) Turn on or off MIC VOL.(OPTIONAL) Adjust microphone volume by pressing MIC VOL. +/ -. MIC1/MIC2 (OPTIONAL) Connect the microphone. ( 6.3 mm) PORT. IN For connecting a portable device and playing it through the systems speaker. Headphone jack Connect a headphone plug ( 3.5 mm) into the jack to listen to the sound through headphones (not supplied).

FUNCTION To select the Functions press (DVD/CD USB TV-AUDIO (Optional) PORTABLE FM
CLOCK For setting the clock and checking the time.(see setting the clock) TIMER (Use your player as a desired time.) SET confirms the time you have selected when setting the clock. - RDS (OPTIONAL) shows information about radio stations. (see listening to the radio) USB connector Connect a remote USB compatible player here.
VOLUME Adjustment Moves volume knob to right and left

Touch buttons

. (. or >) AUTO TUNING -TUNER. / (. or >) SKIP/ SCAN (Press and hold the key )- CD buttons B/]] (PLAY/PAUSE) - DISPLAY MODE Press and hold about 3 second B/]] (page 13) x STOP button - DEMO (page 13) XDSS (MP3 Optimizer) Reinforce the treble, bass and surround effect,XDSS ON will show in the display,press again for NORMAL. (Page 13) USB Rec. USB DIRECT RECORDING (Page 19)
Disc tray Z OPEN/CLOSE Ejects or
inserts the disc tray by pressing the button.

Page 7

Hooking up the unit - I
MONITOR OUT / OUT PUT(COMPONENT VIDEO /PROGRESSIVE SCAN) connections

MONITOR jack connection

Connect the VIDEO jack on the unit to the corresponding input jacks on your TV using a Video cable.
OUT PUT (COMPONENT VIDEO) jacks connection
Connect one end of the component(Y PB PR) cable to the COMPONENT VIDEO jack on the unit and other end to the COMPONENT INPUT jack on your TV.

SPEAKERS

Page 8
Hooking up the unit -II (Optional)
SCART connection- Optional Antenna connection
Fit the AM loop aerial to its stand Connect the AM loop aerial to the player. Connect the FM aerial The reception will be at its best when the two loose ends of the aerial are in a straight line and horizontal.
a Connect one end of the scart
cable into the TO TV SCART jack on the unit and other end to the corresponding in jack on your TV. You can get Audio and Video signals together with this connection. (In DVD/USB function, you can hear to set speaker only.) b Plug the power cord into the power source.

Page 9

Remote control
a POWER : Switches the unit ON or OFF. MUTE : Press MUTE to mute your unit. For example, to answer the telephone. c PLAY (N): Starts playback. - 1.5 speed playback The 1.5 speed allows you to watch the pictures and listen to the sound quicker than playing at a normal speed on the disc.- (page 14) - MONO/STEREO FM mode state,selects MONO or STEREO by pressing play button STOP (x): Stops playback or recording. PAUSE/STEP(X): Pause playback. REC (z) : USB DIRECT RECORDING This function enable you to record music to a connected USB storage device from any other source (Audio CD) (page19) - SCAN (-/+)(bb/BB) : Search backward or forward. - SKIP (-/+)(. / >): Go to next or previous chapter/ track/Title. PROG./MEMO. : Accesses or removes Program menu. VOLUME (+/-) : Adjusts speaker volume. d REPEAT : Repeats a Chapter/ Track/ Title all. CLEAR: Removes a track number on the Program List. S-TITLE: During playback, S - TITLE repeatedly to select a desired subtitle language. VOCAL FADER (Optional) : You can enjoy the function as karaoke, by reducing singer vocal of music in the various source (MP3/WMA/CD or media encoded with Dolby Digital etc.) except for Karaoke mode. (Page 13 ) RDS (optional): Radio display mode PTY (optional) : Views the various displays of the RDS.

FUNCTION : (DVD/CD FM AM) INPUT : Changes the input source (USB TV -AUDIO (Optional) PORTABLE) SLEEP : You can set the unit to turn off automatically at a specified time. - DIMMER Dims the LED (Light-emitting diode) of front panel by half in power-on status. RETURN (O): Press to move back wards in the menu. EQ (EQUALIZER Effect) : You can choose 7 fixed sound impressions.(page 13)
VSM : Press VSM to set the VIRTUAL sound.(page 13) 0-9 numerical buttons: Selects numbered options in a menu. b ECHO VOL.(V /v ):Adjusts echo volume (Optional) MIC VOL.(V /v ): Adjusts microphone volume (Optional) SETUP : Accesses or removes setup menu MENU : Accesses the menu on a DVD disc. DISPLAY: Accesses On-Screen Display. TITLE : If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appear. b / B / v / V (left/right/up/down):Used to navigate onscreen displays. SELECT/ENTER : Acknowledges menu selection. PRESET(-/+) (V/v) : Selects programme of Radio. TUN.(-/+) (b/B): Tunes in the desired radio station.

Page 10

OSD Initial language setting (Optional)
After factory setting ,this beginning menu language will only be displayed at DVD or USB mode if you turn on the power at the first time.

Adjust the setting

ON REMOTE
1. Display setup menu: 2. Select a desired option on the first level: 3. Move to second level: 4. Select a desired option on the second level: 5. Move to third level: SETUP
vV B vV B v V and SELECT/ENTER
ON PLAYER 1. Turn the power on: Appear the language list display window 2. Select the language : 3. Press: 4.To confirm press: 1 STANDBY/ON

ON REMOTE 1 POWER

6.Change the setting:
SELECT/ENTER SELECT/ENTER
Adjust the settings - more you can do
Adjust the language settings
OSD Select a language for the Setup menu and on-screen display. Disc Audio/Subtitle/Disc Menu Select a language for the Menu/Audio/Subtitle. [Original]: Refers to the original language in which the disc was recorded. [Others]: To select another language, press number buttons then SELECT/ENTER to enter the corresponding 4-digit number according to the language code list in the reference chapter. If you make a mistake while entering number, press CLEAR to delete numbers then correct it. [OFF] (for Disc Subtitle): Turn off Subtitle.

Initial Setting the Area Code (Optional)
After factory setting ,To set the Area code you have to as below.
ON REMOTE 1. Display setup menu: 2. Select LOCK menu on the first level: 3. Move to second level: Appears the activated Area code on the second level. 4. Move to third level: 5. Enter the new pass word and then, press: 6. Recheck entered new pass word and then, press: 7. Select a code for a geographic area: After select,Rating and Password will be activated.(page 20) SETUP
Adjust the display settings
TV Aspect Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. [16:9]: Select when a 16:9 wide TV is connected. Display Mode If you selected 4:3, youll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary.
Numerical button of 0~ 9 then, SELECT/ENTER Numerical button of 0~ 9 then, SELECT/ENTER

Page 11

TV Output Select (Optional) Select an option according to the TV connection type. [YPbPr]: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN jacks on the unit. [RGB]: When your TV is connected with the SCART jack. - When connected by RGB, COMPONENT OUT not operate. Progressive ScanProgressive Scan Video provides the high quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set [Progressive Scan] to [On]. Press SELECT/ENTER to comfirm your selection. - If you not press ENTER within 10 seconds it will be [OFF].
Adjust the others settings
DivX (R) Registration - We provide you with the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX VOD service. For more information, visit www.divx.com/vod. Press SELECT/ENTER when [Select] icon is highlighted and you can view the registration code of the unit. Semi Karaoke (Optional) - When a chapter/ title / track is fully finished, this function shows the score in the screen with a fanfare sound. Semi Karaoke on : Turn the Semi Karaoke function on. When you finished singing a score will appear on the screen. Semi Karaoke off : Turn the Semi Karaoke function off. Fanfare and score do not appears on the screen Available discs for the Semi Karaoke function: - DVD, DVD Karaoke discs with more than 2 tracks - This function operate on the DVD/CD mode. - The Semi Karaoke function is available only when a microphone is connected. - When you watching movies, off the Semi Karaoke at the SETUP menu or enjoy it without connecting the MIC if the fanfare or score appears during changing a chapter. Bit Rate - Select Bit Rate signal speed 96kbps or 128kbps (Rec. Bit rate)

Adjust the audio settings
DRC (Dynamic Range Control) Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal Select [On] to mix karaoke channels into normal stereo. This function is effective for multi-channel karaoke DVDs only.

Adjust the lock settings

To access the lock options, you must enter the 4-digit password. If you have not yet entered a password you are prompted to do so. Enter a 4-digit password. Enter it again to verify. If you make a mistake while entering number, press CLEAR to delete numbers then correct it. If you forget your password you can reset it. Press SETUP and Input 210499 The password has now been cleared. Rating Select a rating level. The lower the level, the stricter the rating. Select [UNLOCK] to deactivate the rating. Password Sets or changes the password for lock settings. [New]: Enter a new 4-digits password using the numerical buttons then press SELECT/ENTER. Enter the password again to confirm. [Change]: Enter the new password twice after entering the current password. Area code Select a code for a geographic area as the playback rating level. This determines which areas standards are used to rate DVDs controlled by the parental lock. See the Area Codes on page 20.

Page 12

Displaying Disc Information
1. Press: 2. Select a item: 3. Adjust the Display menu settings: 4. To return the exit DISPLAY

Setting the Clock

ON PLAYER 1. Turn the power on: 2. Press for at least 2 seconds: 3. Choose from either: AM 12:00 (for an am and pm display) or 0:00 (for a 24 hour display) 4. Confirm your selection: 5. Select the hours: 6. Press: 7. Select the minutes: 8. Press: 1 STANDBY/ON CLOCK ON REMOTE 1 POWER

DISPLAY

. or >
Displaying Disc Information - more you can do
You can select an item by pressing vV and change or select the setting by pressing b B. Current title (or track) number/total number of titles (or tracks) Current chapter number/total number of chapters Elapsed playing time Selected audio language or channel Selected subtitle Selected angle/total number of angles Selected Sound mode
Use your player as an alarm clock
Press and hold TIMER for two seconds. Each function, TUNER, DVD/CD, USB flashes for two seconds. Press SET when the function you want to be woken by is showing. When you select the TUNER function, select the previously memorized preset number by tapping./ > on the front panel and press SET. If you choose DVD/CD or USB you will be shown below. You will be shown the ON TIME display. This is where you set the time you want the alarm to go off. Use. or >to change the hours and minutes and SET to save. You will then be shown the OFF TIME display. This is where you set the time you want the function to stop. Use. or > to change the hours and minutes and press SET to save. Next you will be shown the volume (VOL) you want to be woken by. Use. or > to change the volume and SET to save. Switch the system off. The clock icon shows that the alarm is set. When the system is turned off you can check the time the alarm is set for by pressing TIMER. You can also turn the alarm on and off by pressing TIMER. To set the alarm to go off at a different time, switch the system on and reprogramme following the same steps as initially.

When not using the microphone, set the MIC VOL. volume button to minimum or turn off the MICs and remove the microphone from the MIC Jacks. If the microphone is set too near the speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using the MIC VOL. volume button. If sound through the microphone is extremely loud, it may be distorted. In this case, press the MIC VOL. volume button toward minimum.
When you connect a headphone to set with one of the EQ modes chosen, the EQ button does not work. When you connect a headphone with 'regional EQ' chosen, the mode changes into 'NORMAL'. It returns to regional EQ when you disconnect the headphone.

Page 14

Playing a Disc

ON PLAYER

1. Insert a Disc: 2. To Start playback: 3. To Stop playback: Z B/]] x B x STOP
Selecting a subtitle language
During playback, press S-TITLE ( guage.
) repeatedly to select a desired subtitle lan-
Fast forward or fast reverse

DVD DivX ACD WMA MP3

Press SCAN (m or M) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing SCAN (m or M) repeatedly. Press PLAY ( N) to continue play at normal speed.
Playing a Disc - more you can do
Playing a DVD that has a menu
Watch and listen 1.5 times faster
Most DVD now have menus which load first before the film begins to play. You can navigate these menus using vV b B to highlight an option. Press SELECT/ENTER to select.
Press PLAY when a disc is already playing to watch and listen to a DVD 1.5 times faster than normal playback speed. B x1.5 will appear on the screen. Press PLAY again to return to normal playback speed.
Slow down the playing speed
Skip to the next/previous chapter/track
Press SKIP (>) to move to the next chapter/track. Press SKIP (.) to return to the beginning of the current chapter/track. Press SKIP (.) twice briefly to step back to the previous chapter/track.
While playback is paused, press SCAN (M) to slow down forward playback. You can change the various playback speed by pressing SCAN (M) repeatedly. Press PLAY ( N) to continue play at normal speed. DVD disc can operate Slow down Forward/ Reverse playback only.

Pause a playback

Viewing the title menu
Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue playback.
Press TITLE to display the disc's title menu, if available.

Viewing the DVD menu

Frame-by-Frame playback
Press MENU to display the disc menu, if available.
Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback.
Starting play from selected time

Playing repeatedly

Press REPEAT repeatedly to select an item to be repeated. The current title, chapter or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [Off]. DivX : Track All Off ACD WMA MP3 : TRACK ALL [OFF No display ] DVD : Chapter Title Off
Searches for the starting point of entered time code. Press DISPLAY then select clock icon. Enter a time then press SELECT/ENTER. For example, to find a scene at 1 hours, 10 minutes, and 20 seconds, enter "11020" and press SELECT/ENTER. If you enter the wrong number, press CLEAR to enter again.

Page 15

Last Scene Memory
Playing a DivX movie file - more you can do
Changing the character set to display DivX subtitle correctly
If the subtitle does not display properly,press and hold S-TITLE button about 3seconds to display the language code menu and then,press S-TITLE button repeatly to change the language code until the subtitle is displayed properly. DivX disc compatibility with this player is limited as follows: Available resolution size of the DivX file is under 800x600 (W x H) pixel. The file name of the DivX subtitle is available by 45 characters. If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. If the video and audio structure of recorded files are not interleaved, either video or audio is outputted. Playable DivX file : ".avi ", ".mpg ", ".mpeg ", ".divx" Playable Subtitle format : SubRip(*.srt/*.txt) ,SAMI(*.smi), SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub) Playable Codec format : "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "MP43 ", "3IVX ". Playable Audio format : "AC3 ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 32 - 48 kHz (MP3),within 32 - 48kHz (WMA) Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
This unit memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled.

Screen Saver

The screen saver appears when you leave the unit in Stop mode for about five minutes.

System Select

You must select the appropriate system mode for your TV system. Remove any disc that might be in the unit, press and hold PAUSE/STEP (X) for more than five seconds to be able to select a system (PAL, NTSC, AUTO).

Mixed disc or USB Flash Drive DivX, MP3/WMA and JPEG
When playing a disc or USB Flash Drive contained with DivX, MP3/WMA and JPEG files together, you can select which menu of files you would like to play by pressing TITLE.
Playing a DivX movie file
1. Insert a Disc: 2. Select a movie file from the menu: 3. To Start playback: 4. To Stop playback: Z

vV SELECT/ENTER x STOP

Listening to Audio CD, MP3 or WMA files
1. Insert a Disc: 2. Select a music file from the menu: 3. To Start playback: 4. To stop playback: Z

vV B PLAY x STOP

B/]] x

Page 16

Listening to Audio CD, MP3 or WMA files more you can do
Creating your own program You can play the contents of a disc in the order you want by arranging the order of the musics on the disc. The program is cleared when the disc is removed. Select a desired music then press PROG./MEMO. or select and then press SELECT/ENTER to add the music to the program list. To add all music in the disc, select and then press SELECT/ENTER. Select a music from the program list then press SELECT/ENTER to start programmed playback.To clear a music from the program list, select the music you want to clear then press CLEAR or select icon and then press SELECT/ENTER. To clear all music from the program list, select " " then press SELECT/ENTER.

Viewing photo files

1. Insert a Disc: 2. Select a photo file on the menu: 3. Select a photo file on the menu: 4. Display the selected file in full screen: 5. To stop playback: B/]] x SELECT/ENTER x STOP Z
Displaying file information (ID3 TAG )
While playing a MP3 file containing file information, you can display the information by pressing DISPLAY repeatedly. MP3 / WMA disc compatibility with this player is limited as follows: Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) The unit cannot read an MP3/WMA file that has a file extension other than.mp3 /.wma. CD-R physical format should be ISO 9660 If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files.We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. File names should have a maximum of 8 letters and must incorporate an.mp3 or.wma extension. They should not contain special letters such as / ? * : < > l etc. The total number of files on the disc should be less than 999. This unit requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.

The FM tuner is supplied with the Radio Data System (RDS) facility. This shows the letters RDS on the display, plus information about the radio station being listened to. Press RDS on the remote control several times to view the information. PTY - Programme Type, such as News, Sport, Jazz. RT - Radio Text, the name of the radio station. CT - Time Control, the time at the location of the radio station. PS - Programme Service name, the name of channel. You can search the radio stations by programme type by pressing RDS. The display will show the last PTY in use. Press PTY one or more times to select your preferred programme type. Press and hold. or >. The tuner will search automatically. When a station is found the search will stop

PRESET(+/-) PROG./MEMO.

Page 18
Listening to music from your portable player
Connecting your portable USB player
The advantage of connecting your portable USB player through the systems USB port is that the portable device can be controlled from the system. Connect the portable player to the system using a USB cable (not supplied).
The player can be used to play the music from many types of portable player. ON PLAYER 1. Connect the portable player by plugging the unit into PORT. IN on the side of the player: 2. Turn the power on: 3. Select the PORTABLE function: 4. Turn the portable player on and start it playing: 1 STANDBY/ON FUNCTION 1 POWER INPUT ON REMOTE
ON PLAYER 1. Select the USB function: 2. The display will show SEARCHING, followed by the number of files displayed: 3. Select a Title MENU 4. Start selected file 5. Before disconnecting the portable USB player, change to any other function by pressing: 6. Remove the USB player Compatible USB Devices FUNCTION

ON REMOTE INPUT

SELECT/ENTER or B

FUNCTION

FUNCTION or INPUT
Devices which require additional program installation when you have connected it to a computer, are not supported. MP3 Player : Flash type MP3 player. The MP3 player requiring installation of a driver is not supported. USB Flash Drive : Devices that support USB2.0 or USB1.1.

USB device requirement

Do not extract the USB device in operating. A back up demands to prevent a data damage. If you use a USB extension cable or USB hub, the USB device might not be recognized. A device using NTFS file system is not supported. (Only FAT (16/32) file system is supported.) The USB function of this unit does not support all USB devices. Digital camera and mobile phone are not supported. This unit is not supported when the total number of files is 1000 or more. If the drive of USB device is two or more, a drive folder is displayed on the screen. If you want to move to the previous menu after you select a folder, press RETURN.

Page 21

Troubleshooting
Symptom POWER No power RADIO No sound Some noise occurs. The function switch is not set to the Radio mode. There are electronic devices near the player. The antenna is positioned or connected poorly Set the switch to the Radio mode. Set the player far from the devices. Check the anntena connection and adjust its position Cause The power cord is not plugged in. Correction Plug in the power cord.
DVD/CD The unit does not start playback No picture An unplayable disc is inserted. The disc is placed upside down. The disc is not placed within the guide. The TV is not set to receive the video signal Insert a playable disc. Place the disc with the playback side down. Place the disc on the disc tray correctly inside the guide. Clean the disc. Select the apporate video input model on the TV so the picture from the unit appears on the TV

REMOTE CONTROL

The remote control does not work properly.
The remote control is not pointed at the remote sensor of the unit directly.
Point the remote control the remote sensor directly of the unit.
The batteries in the remote control are exhausted.
Replace the batteries with new ones.

Page 22

Specifications

General

Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Operating humidity
Refer to main label. Refer to main label. 3.42 kg 330 x 138.5x 252.4 mm Temperature: 5C to 35C, Operation status: Horizontal 5% to 85%
FM Tuning Range Intermediate Frequency AM Tuning Range Intermediate Frequency

Amplifier

87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz 10.7 MHz 522 - 1,620 kHz or 520 - 1,720 kHz 450 kHz
OUTPUT POWER Stereo Mode Frequency Response
Signal-to-noise ratio DVD/CD player Frequency response (audio) Signal-to-noise ratio (audio) Signal-to-noise ratio (video) Dynamic range (audio) Video output Component Video output Speakers
100 W + 100 W (4, THD 0.5%) : FBDW + 100 W (4, THD 0.5%) : FBD- 20000Hz 75dB
50 W + 50 W (4, THD 0.5%) : FBDW + 50 W (4, THD 0.5%) : FBD103

40 - 20000 Hz More than 75 dB (1 kHz) More than 75 dB (1 kHz) More than 75 dB 1.0 V (p-p), 75 (Y) 1.0 V (p-p), 75 (Pb)/(Pr) 0.7 V (p-p), 75
Type Impedance Rated Input Power Max. Input Power Net Dimensions (W x H x D) Net Weight
FBS203V 2 Way 2 Speaker 4 100W 200W 165 X 341 X 261 mm 4.48 kg
FBS103V 2 Way 2 Speaker W 100W 165 X 341 X 261 mm 4.03 kg
Designs and specifications are subject to change without pior notice. 22 DVD Mini Hi-Fi System ] USER GUIDE

Page 23

P/NO : MFL42956216