Multi Split System

Outdoor Units
Specifications_Outdoor Units
FM37AH UE0 FM40AH UH3 FM48AH U33 FM56AH U33 FM56AH U33
4.0~16.7~18.52 13,800~57,000~63,200 4.5~17.87~18.75 15,456~61,000~64,000 1.0~4.96~5.65 1.25~4.62~5.70 A/A MS09AH N40 * 8EA 4.6~21.7~24 7.4~22.4~26 1/220~240/50 950*1,380*330(37.4*54.3*12.3) 110(242.5) 9 4,800(169.3) 60(2,119)*9.52(3/8) 19.05(3/4) 30 15
FM41AH U33 FM49AH U33 FM57AH U33
Model Nominal Capacity* (Min~Rated~Max) Cooling Heating Nominal Input * (Min~Rated~Max) Energy label Testing Combination Running Current Cooling Heating kW Btu/h kW Btu/h kW kW

FM40AH UH3

2.8~11.7~13.5 96,000~40,000~46,000 3.2~13.5~15.0 11,040~46,000~51,000 1.1~3.63~4.65 1.4~3.36~4.84 A/A MS07AH N40 * 7EA

FM48AH U33

3.3~15.47~17.0 11,400~52800~58000 3.7~16.41~17.29 12,768~56,000~59,000 0.84~4.69~5.35 1.30~4.43~5.58 A/A MS07AH N40 * 5EA MS09AH N40 * 3EA 3.9~21.1~23.2 6.9~22.6~25 1/220~240/50 950*1,380*330(37.4*54.3*12.3) 110(242.5) 8 4,800(169.3) 60(2,119)*9.52(3/8) 19.05(3/4) 30 15

FM37AH UE0

6.33~9.67~10.8 21,600~33,000~37,000 6.68~11.1~12.3 22,800~38,000~42,000 1.80~3.00~3.45 1.83~3.05~3.51 A/A MS07AH N40 * 6EA

FM41AH U33

2.8~13.5~14.1 9,600~46,000~48,000 3.2~14.1~15.2 10,752~48,000~52,000 0.8~3.47~5.0 1.0~4.12~5.1 A/A MS07AH N40 * 7EA 1.5~7.2~8.1 1.7~7.5~8./ 380~415 / 50 950*1380*330(37.4*54.3*12.3) 108(238.0) 7 4800(163.9) 60(2,119) x 9.52(3/8) 19.05(3/4) 30 15

FM49AH U33

3.3~15.47~17.0 11,400~52,800~58,000 3.7~16.41~17.29 12,768~56,000~59,000 0.84~4.69~5.5 1.30~4.43~5.6 A/A MS07AH N40 * 5EA MS09AH N40 * 3EA 1.8~7.2~8.4 2.1~7.5~8./ 380~415 / 50 950*1380*330(37.4*54.3*12.3) 108(238.0) 8 4,800(169.3) 60(2,119) x 9.52(3/8) 19.05(3/4) 30 15

FM57AH U33

4.0~16.7~18.52 13,800~57,000~63,200 4.5~17.87~18.75 15,456~61,000~64,000 1.0~4.96~5.7 1.25~4.62~5.75 A/A MS09AH N40 *8EA 2.3~7.9~9.1 2.5~8.4~8./ 380~415 / 50 950*1380*330(37.4*54.3*12.3) 108(238.0) 9 4,800(169.3) 60(2,119) x 9.52(3/8) 19.05(3/4) 30 15

Cooling Heating

Power Supply Dimensions W*H*D Net Weight Max. Number of Connectable Indoor Units Refrigerant Charge (at 5m) g(oz) Air flow rate (H/M/L) CMM(CFM) Noise Level (H/L) Sound Pressure at 1m dB(A)3 Piping Connections Liquid() mm(inch) Gas() mm(inch) Max. Interunit Piping Total Pipin m Length (Main+Total Branch ) Main Piping Total Branch Piping Each Branch Piping Max. Elevation Indoor Unit~Outdoor Unit m Difference Indoor Unit~Indoor Unit m
A A /V/ Hz mm(inch) kg(lbs)
6.2~16.0~20.0 6.9~16.4~20.5 1/220~240/50 900*1,165*370(35.4*45.8*14.5) 95(209) 7 4,400(155) 53(1,872)*9.52(3/8) 19.05(3/4) 30 15
3.4-5.4-6.0 3.5-5.4-6./ 380~415 / 50 900*1,165*370 (35.4*45.8*14.5) 80(176) 6 2,800(98.8) 32(1,130) x 2 51/47 6.35(1/4) 15.88(5/8) 30 15
Notes: 1. Capacities are based on the following conditions: Cooling: - Indoor Temperature 27C(80.6F) DB /19 C(66.2F) WB - Outdoor Temperature 35C(95F) DB /24C(75.2F) WB Heating: - Indoor Temperature 20C(68F) DB / 15C(59F) WB - Outdoor Temperature 7C(44.6F) DB / 6C(42.8F) WB Piping Length - Interconnecting Piping Length 7.5m - Level Difference of Zero. 2. * : See page "Combination Table" 70 Page 3. Due to our policy of innovation some specifications may be changed without notification. 4. At least two indoor units should be connected. 5. Minimum combination capacity rate should be more than 40%.
Notes: 1. Capacities are based on the following conditions: Cooling: - Indoor Temperature 27C(80.6F) DB /19C (66.2F) WB - Outdoor Temperature 35C(95F) DB /24C (75.2F) WB Heating: - Indoor Temperature 20C(68F) DB / 15C (59F) WB - Outdoor Temperature 7C(44.6F) DB / 6C (42.8F) WB Piping Length - Interconnecting Piping Length 7.5m - Level Difference of Zero. 2. * : See page "Combination Table" 70 Page 3. Due to our policy of innovation some specifications may be changed without notification. 4. At least two indoor units should be connected. 5. Minimum combination capacity rate should be more than 40%.

Accessory

Distributor Box
PMBD3620, PMBD3630, PMBD3640, PMBD7220, PMBD7230

Y Branch and Branch Kit

PMBL3620 / PMBL5620 (2units) PMBL1203F0 (3units)
Easy Installation with Various Distributor Box
For 2 Indoors 3 Indoors 4 Indoors

Features

Y Branch and Branch kit make Multi Fdx installation much easier. Y-Branch and Branch kit for both gas and liquid are provided. Insulation material is also provided for covering the branches.

Distributor

PMBD3620 PMBD7220

PMBD3630 PMBD7230

PMBD3640
Various distributors can make much easier installation for any sites

Application

Distribution of refrigerant to various indoor units. 3 models (2, 3, 4 indoor units) Consists of LEVs inside it Controlling PCB inside the unit Internally insulated (prevents any chances of drainage) Flare joints for easy and clean installation Compact design (low height) Flexible installation

No brazing Just flaring

Y Branch
Specifications_Distributors
Model Connectable Indoor Units Power Source Power Consumption Runing Current Dimensions Net Weight Piping Connection (To Outdoor Unit) Piping Connection (To Indoor Unit) Accessories

Number of Indoor Units

PMBD3620
Capacity Btu/h /V/Hz W A mm(inch) kg/Ib mm(inch) mm(inch) mm(inch) mm(inch) EA EA EA
1~2 7k/9k/12k/18k/24k 1, 50, 220~0.05 302*143*252(11.9*5.6*9.9) 4.8/10.6 9.52(3/8) 19.05(3/4) 6.35(1/4)*2EA 9.52(3/8)*2EA 1

PMBD3630

1~3 7k/9k/12k/18k/24k 1, 50, 220~0.05 302*143*252(11.9*5.6*9.9) 4.9/10.8 9.52(3/8) 19.05(3/4) 6.35(1/4)*3EA 9.52(3/8)*3EA 1
1~4 7k/9k/12k/18k/24k 1, 50, 220~0.05 302*143*252(11.9*5.6*9.9) 5/11 9.52(3/8) 19.05(3/4) 6.35(1/4)*4EA 9.52(3/8)*4EA 1

PMBD7220

1~2 18k/24k/30k/36k 1, 50, 220~0.05 302*143*252(11.9*5.6*9.9) 5/11 9.52(3/8) 19.05(3/4) 6.35(1/4)*2EA 12.7(1/2), 15.88(5/8) 1

PMBD7230

1~3 18k/24k/30k/36k 1, 50, 220~0.05 302*143*252(11.9*5.6*9.9) 5/11 9.52(3/8) 19.05(3/4) 6.35(1/4)*3EA 12.7(1/2), 15.88*2EA 1

Accessory model name

Model Name
PMBL3620 PMBL5620 PMBL1203F0

(Unit : mm)

No. of BD units

2 units 2 units 3 units

Applicable Model

Specification Gas

15.88 15.88 6.35

Liquid

6.35 6.35
W*H*D Liquid() Gas() Liquid() Gas() Hanger (Bracket) Screw Manual

Only 3, 36k Btu/h

19.05 19.05

9.52 9.52

1, 3 1, 3
Note : 1. The piping connection must be suit the piping sizes of the indoor unit which will be connected. (If need, use the connector which is included in the indoor unit) 2. The BD should be installed inside the building.

Note : Due to our policy of innovation some specifications may be changed without notification.