OVERSEAS PURCHASERS:

Overseas purchasers must, on acceptance of offers, advise of their intentions to export their good immediately and notify our Sales Coordinator, Elaine Allan [ elaine.allan@edwardsymmons.com ] Overseas purchasers will be required to provide details of : (a) Their passport(s) (b) One other method confirming their identity, ie drivers licence, name, address, UK agent (if any), telephone and fax numbers. (c) Full details of their national bank and their UK corresponding bank. (d) Details from their bank confirming method of payment, etc. Please also ensure that: Your country, or the country to which the items are destined, holds no import restrictions on the goods that you wish to purchase. The country has no import licence restrictions or a restriction on currency allocation. The country has no prolonged inspection procedure, which might cause excessive delay in allowing your goods to be imported. You receive a fully descriptive invoice in order that you may arrange payment as soon as possible with our bank. You employ a reputable freight-forwarding organisation. Please note that many of the machinery removal companies in this country are not necessarily freight forwarders. We will be pleased to advise accordingly. You have read the Conditions of Sale. Please Note: We will not allow removal of any Lot from the Sale site until our Accounts Department has received notification from our bankers that your payment has been properly cleared in full. Monies must be transferred to ourselves within the time stated in the Notice to Purchasers If there are any special arrangements that you wish to make with us, you must contact us at least three days before the Sale date. Our terms regarding payment of VAT and subsequent refunds.

(e) (f) (g) (h) (i) (j)

(b) (c)
VAT on Goods Destined for Export: All purchasers intending to export their purchases will be charged a deposit equal to that of the VAT due on each lot purchased. In order to qualify for a refund, the goods must be exported in accordance with regulations under Indirect Export and valid evidence of export received by Edward Symmons within one month of the date of export. Where satisfactory evidence is not provided, goods will be subject to UK VAT at the standard rate of export and the deposit will not be refunded. We are unable to refund the VAT on the buyers premium in any circumstances. Please ensure that the cashier has been notified of your intentions to export prior to removal of goods. The above information must be supplied in writing to our Sales Co-ordinator, Ms Elaine Allan, Edward Symmons, 3 Lake Court, Hursley, Hampshire, SO21 2LD on your official company notepaper and signed by the contact name quoted. If you intend to export your purchases using your own transport (either by sea, rail or air), then VAT will be levied and refunded upon receipt of satisfactory documentation, supporting removal of the goods purchased. Edward Symmons reserve the right to refuse to accept the bid of any bidder should they be unable to satisfy Edward Symmons on any of the above.

Fujitsu Siemens, Model D22W-1G, 22" Flat Screen Monitor (Located on First Floor) Fujitsu Siemens, Model D22W-1G, 22" Flat Screen Monitor (Located on First Floor) Fujitsu Siemens, Model D22W-1G, 22" Flat Screen Monitor (Located on First Floor) Dell, Model E1909WB, 19" Flat Screen Monitor (Located on First Floor) Dell, Model E1909WB, 19" Flat Screen Monitor (Located on First Floor) Dell, Model E1909WB, 19" Flat Screen Monitor (Located on First Floor) Seven Various Keyboards and 5 Various Mice as lotted (Located on First Floor) Fellows, Model PB2450, Binding Machine (Located on First Floor) Light Oak Effect, 2 Pod Workstation, To Include: 2 Radial Desks, 2 Three Drawer Pedestals, Desktop Partitioning and 2 Cloth Upholstered Swivel Chairs (Located on First Floor) Light Oak Effect Workstation, To Include: Radial Desk, 3 Drawer Pedestal and Cloth Upholstered Swivel Chair (Located on First Floor) Light Oak Effect Workstation, To Include: Radial Desk, 3 Drawer Pedestal and Cloth Upholstered Swivel Chair (Located on First Floor) Light Oak Effect Radial Desk (Located on First Floor) Light Oak Effect, 2 Pod Workstation, To Include: 2 Radial Desks, 2 Three Drawer Pedestals, Desktop Partitioning and 2 Cloth Upholstered Swivel Chairs (Located on First Floor) Light Oak Effect Workstation To Include: Radial Desk, 3 Drawer Pedestal, and Cloth Upholstered Swivel Chair (Located on First Floor) Light Oak Effect, 4 Pod Workstation, To Include: 4 Radial Desks, 4 Three Drawer Pedestals, Desktop Partitioning, and 4 Cloth Upholstered Swivel Chairs (Located on First Floor) Light Oak Effect, 4 Pod Workstation, To Include: 4 Radial Desks, 4 Three Drawer Pedestals, Desktop Partitioning, and 4 Cloth Upholstered Swivel Chairs (Located on First Floor) Two Light Oak Effect, 2 Door Cupboards and 1 Three Drawer Filer (Contents Not Included) (Located on First Floor) Two Light Oak Effect, 2 Door Cupboards and 1 Four Drawer Filer (Contents Not Included) (Located on First Floor) Light Oak Effect 2 Door Cabinet, with 4 Drawer Filer, and Three Drawer Filer (Contents Not Included) (Located on First Floor) Two Light Oak Effect 2 Door Cabinets and 1 Three Drawer Filer (Contents Not Included) (Located on First Floor)
Two Light Oak Effect 2 Door Cabinets (Contents Not Included) (Located on First Floor) Three Light Oak Effect 2 Door Cabinets and 1 Three Drawer Filer (Contents Not Included) (Located on First Floor) Four Light Oak Effect 2 Door Cabinets (Contents Not Included) (Located on First Floor) Light Oak Effect 2 Door Cabinet and 3 Drawer Filer (Contents Not Included) (Located on First Floor) Two Light Oak Effect 3 Drawer Filers and 1 Two Door Cabinet (Contents Not Included) (Located on First Floor) Three Light Oak Effect 2 Door Cabinets (Contents Not Included) (Located on First Floor) Light Oak Effect 2 Tier Bookcase (Contents Not Included) (Located on First Floor) Three Light Oak Effect Low Tables (Contents Not Included) (Located on First Floor) Contents Of Boardroom To Include: 2 Piece Dark Oak Effect Boardroom Table with 14 Cloth Upholstered High Back Chairs, Dark Oak Effect Table, Euro Screen, Projector Screen and Steel Mobile Projector Stand (Located on First Floor) Contents Of Office To Include: 2 Light Oak Effect 2 Door Cupboards, 2 Four Drawer Filers, 2 Two Door Cabinets, Radial Desk with 3 Drawer Pedestal, Cloth Upholstered Swivel Chair and 2 Cloth Upholstered Chairs (Located on First Floor) Contents Of Office To Include: Light Oak Effect 3 Drawer Filer, Radial Desk with 3 Drawer Pedestal and Cloth Upholstered Swivel Chair (Located on First Floor) Contents Of Office To Include: 2 Light Oak Effect 2 Door Cabinets, 2 Tier Bookcase, Radial Desk with 3 Drawer Pedestal and Cloth Upholstered Swivel Chair (Located on First Floor) Contents Of Office To Include: 2 Light Oak Effect 3 Drawer Filers, 2 Tier Bookcase, Radial Desk with 2 Three Drawer Pedestals and Cloth Upholstered Swivel Chair (Located on First Floor) Contents Of Office To Include: Dark Oak Effect 2 Door Cabinet, 3 Drawer Filer, 2 Four Drawer Filers, 3 Tier Bookcase, Radial Desk with 2 Three Drawer Pedestals and 3 Various Executive Swivel Chairs (Located on First Floor) Contents Of Store Room To Include: 3 Bays Of Light Duty Racking and Light Oak Effect 2 Door Cupboard (Located on First Floor) Contents Of Kitchen To Include: Bosch, Classixx Dishwasher, Hotpoint Future RLA34 Refrigerator, Belling Microwave, Toaster, Coffee Percolator, Light Oak Effect Table (Located on First Floor) IBM, Model X Series 225, Intel Xeon E Server, with Hewlett Packard Storageworks, Altrium 232 Tape Drive, 2 IBM 73.4 GB SCSI Drives, Acer, Model AL1511, LCD Flat Screen Monitor, Keyboard and Mouse WITHDRAWN

147 148

151 152

155 156

159 160
Steel Mobile Tipping Skip Whitney, Model WTS750C, Steel Mobile Tipping Skip, Serial Number: 3038, Year 2007, Max SWL: 1000KG Steel Mobile Tipping Skip Steel Mobile Tipping Skip Whitney, Model WTS750C, Steel Mobile Tipping Skip, Serial Number: 3039, Year 2007, Max SWL: 1000KG Parrs, Steel Mobile Tipping Skip Whitney, Model WTS750C, Steel Mobile Tipping Skip, Serial Number: 3040, Year 2007, Max SWL: 1000KG Steel Mobile Tipping Skip Six Steel Mobile Multi Tier Storage Racks Four Steel A-Framed Mobile Trollies Seven Steel A-Framed Mobile Trollies Quantity of Hand Tooling as lotted Quantity of Hand Tooling as lotted Four Various Pneumatic Sanders Seven Various Pneumatic Drills and Screwdrivers Nine Various Pneumatic Drills and Screwdrivers Ten Various Pneumatic Drills and Screwdrivers Blank Lots

185 186

195 196
F Parr Limited, Steel Forklift Cage, Serial Number: 15498, Year: 2007 Two Steel Framed Storage Racks as lotted Steel Framed Storage Rack, Approximately 2.5 m High x 2.5 m Long (Contents Not Included) as lotted Five Steel Framed Mobile Stock Trollies as lotted Three Steel Framed Mobile Stock Trollies as lotted Three Steel Framed Mobile Stock Trollies as lotted (Contents Not Included) Five Steel Framed Mobile Stock Trollies as lotted (Contents Not Included)
Four Steel Framed Multi Compartment Stock Trollies as lotted Three Various Static Stock Stillages as lotted Six Various Steel Framed Static Stock Stillages as lotted Seven Various Steel Framed Static Stock Stillages as lotted Eight Various Steel Framed Static Stock Stillages as lotted Eight Various Steel Framed Static Stock Stillages as lotted Four Various Steel Framed Static Stock Stillages as lotted Steel Framed Mobile Parts Trolley, Approximately 700mm x 1000mm Sac Truck Parrs, 2000KG Hydraulic Pallet Truck Parrs, 2000KG Hydraulic Pallet Truck Warrior, 2000KG Extended Fork Hydrolic Pallet Truck Towers Limited, Mobile Scaffolding Tower, SWL Platform, 250g / Structure 750kg Quantity of Various Aluminium Ladder Sets Three Bays of Steel Frame Lightweight Shelving (Contents Not Included) Three Bays of Steel Frame Lightweight Shelving (Contents Not Included) Three Bays of Steel Frame Adjustable Pallet Racking (Contents Not Included) Three Bays of Steel Frame Lightweight Shelving (Contents Not Included) Five Bays of Various Steel Framed Leightweight Shelving (Contents Not Included) Five Bays of Various Steel Framed Leightweight Shelving (Contents Not Included) Two Bays of Various Steel Framed Leightweight Shelving (Contents Not Included) Three GP Fabrications Limited, Steel Framed Mobile Storage Trollies Two GP Fabrications Limited, Steel Framed Mobile Storage Trollies Seven Various Steel Framed Storage Racks Urban, Type ST3000, Pneumatic Tilting Workstation, Machine Number: 1208 (1989), Approximately 1600mm x 3000 mm Urban, ST2400, Pneumatic Tilting Workstation, Machine Number: 1204 (1989), Approximately 1600mm x 2400 mm

234 235

Urban, Type ST3600, Pneumatic Tilting Workstation, Machine Number: 1207 (1988), Approximately 1600mm x 3600 mm Urban, ST2400, Pneumatic Tilting Workstation, Machine Number: 1203 (1989), Approximately 1600mm x 2400 mm with Connected Air Powered Hand Tooling Urban, Type ST3000, Pneumatic Tilting Workstation, Machine Number: 1209 (1989), Approximately 1600mm x 3000 mm with Connected Air Powered Hand Tooling Urban, Type ST3000, Pneumatic Tilting Workstation, Machine Number: 1210 (1989), Approximately 1600mm x 3000 mm with Connected Air Powered Hand Tooling Urban, Type ST3000, Pneumatic Tilting Workstation, Machine Number: 1211 (1989), Approximately 1600mm x 3000 mm with Connected Air Powered Hand Tooling Urban, ST2400, Pneumatic Tilting Workstation, Machine Number: 1205 (1989), Approximately 1600mm x 2400 mm with Connected Air Powered Hand Tooling Urban, Type ST3000, Pneumatic Tilting Workstation, Machine Number: 1206 (1989), Approximately 1600mm x 3000 mm with Connected Air Powered Hand Tooling Make Unknown, Pneumatic Vertical Assembly Workstation, Approximately 4000mm x 2220mm Urban, Type KV1800, Pneumatic Vertical Assembly Workstation, Machine Number: 1087 (1984) Steel Framed, Double Sided, Vertical Assembly, Run Off Conveyor, Approximately 3000mm x 1800mm Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 1110 (1989) Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 1306 (2000) Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 1180 (1991) Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 112 (1989) Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 1305 (2000) Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 1108 (1989) Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 1252 (1994) Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 1179 (1997) Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 1251 (1994)

241 242

243 244

247 248

249 250

253 254

Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 1109 (1989) Urban, Type RA3000, Pneumatic Vertical Assembly Workstation, Machine Number: 1111 (1989) Five Various Steel Framed Workstations with Connected Air Powered Hand Tooling as lotted Make Unknown, Treadle Operated Pneumatic Shear Make Unknown, Treadle Operated Pneumatic Shear with Steel Framed Pedestal Make Unknown, Treadle Operated Pneumatic Shear with Steel Framed Pedestal EBG, 2515 Double Ended Bench Grinder, Record Number 3 Bench Mounted Vice and Steel Framed Pedestal Xtreme, Type J1G-ZP4-210P, 210mm Compound Mitre Saw, Serial Number: 200945 with Steel Framed Work Bench Performance Power, PMS 210, Compound Mitre Saw, Serial Number: 2083 Elumatec, Type GLS192, CNC Bead Saw, Serial Number: 1920021101 (2001) with Rotox, Type LA395, Digital Length, Serial Number: 3956129 (2001) and Fabricated Infeed Table Haffner, Type GL175, Bead Saw with Beckhoff, C101, Digital Length, Serial Number: PN107070-001 Make Unknown, Bead Saw with Digital Length WMD, GBS250, CNC Bead Saw with De Man, Type CNC 314, Digital Length, Serial Number: 0020 (1990) and Fabricated Infeed Table Elumatec, Type RAS8001A1, Bench Mounted Crosscut Saw, Serial Number: 0024 Infismac, Type FC/NV, Single Head Night Vent Router, Serial Number: L28 (2002) Jade Engineering, Gem 120, End Milling Machine, Serial Number: 1160299 (1999) Rapid, Type DGL 200-E, CNC Double Head Mitre Saw, Serial Number: 102, Machine Number: 216 (2002) with Ferrocontrol, Cnc Controls: Single Bag Dust Extractor and Zebra, 105 SL, Thermal Label Printer Elumatec, Type TS121/22, Up Stroking Cut Off Saw, Serial Number: 1612121929 (2001) with Digital Length, and Fabricated Infeed Table MLA, M7, Milling Machine with Steel Framed Pedestal ATLA Coop, ITACA, Crimping Machine, Serial Number: 2626 (2008)

261 262

264 265

268 269

271 272
WITHDRAWN Nova Way Limited, Model F-CO4459A, Test Rig, Serial Number: 000668 (Asset Code: 62) Pertici, Univer BS 771, Automatic Bead Saw, Serial Number: 05V123 (2003) with Elumatec, Type MMS100/00, Length, Machine Number: 1000021167-0301 and Fabricated Infeed Table Clarke, Woodworker, 200mm Compound Mitre Saw with Steel Framed Pedestal Jade Engineering, Type WSM3, Water Slot Router, Serial Number: 275 (1999) J Tools Limited, Sampson Mill, Milling Machine, Serial Number: 0702 (2007) with Single Bag Extractor Wegoma, Type SK8/2, Water Slot Milling Machine, Serial Number: 28102E (1997) Sturtz - Elumatec, Type BR44, 4 Head Night Vent Router, Serial Number 101 (1998) Rotox Router Elumatec, Type KF178, Multi Spindle Copy Router, Serial Number: 20198 (1995) Wegoma, Type F130D, Copy Router, Serial Number: 25603E (1991) Wegoma, Type SLV, Single Head Welder, Serial Number 29253E (1997) Rotox, Multi Spindle Copy Router (Disconnected) Wegoma, Type DS-130, CNC Double Head Mitre Saw, Serial Number: 13088054 (1988) with Single Bag Dust Extractor Excel, Model PBS180EE, Horizontal Band Saw, Serial Number: 05053600 (2005) Sealey, GDM 160FX, Pillar Drill, Serial Number: 1104 (2006) MEP, Falcon 250, Pullover Crosscut Saw, (2000) with Roller Table and Steel Framed Fabricated Workbench DeWalt, DW250, Bench Mounted Mitre Saw Infismac, Type FC/NV, Single Head Night Vent Router, Serial Number: L27 (2002) MLA, Type MP44, 4 Head Vent Slot Router, Serial Number: 104 (2003) USM, Type ADS-SE3, Screw Inserter, Serial Number: G-9008 (1988) Sturtz, Type SE-4AS-CNC, CNC Corner Cleaner, Serial Number: 95268 (1998) Sturtz, Type SE-2AS-CNC, CNC Corner Cleaner, Serial Number: 85114 (2000) Urban, Type AKS1400/ETL, CNC Vertical Quad Welder, Serial Number: 14032 (1989) with CNC Off-Station Controls

Sturtz, Type SE-VSM20/19-C-S, CNC Vertical Quad Welder, Serial Number: 120112 (2005) with CNC Off-Station Controls Stuga, Type SZ-499, CNC Sawing Centre, Serial Number: 9404 (1995) with CNC OffStation Controls; Twin Bag Dust Extraction Unit and Monach, Paxar, Thermal Label Printer Stuga, EcoLine, Type STU-Eco45, CNC Machining Centre, Serial Number 204028 (2004) Urban, Oval Shaped, Manuel Framed Carosel, Approximately 14m in Length, with 16 Stillages Bianco, Model 200MAN, Pull Down Horizontal Band Saw, Serial Number: 2196 (2003) with Roller Infeed / Outfeed tables and Manuel Lint Wegoma, Type ADSSE1, "Powaset", Screw Inserter, Serial Number 28566E (1995) Elumatec, Type AKS432, Variable Angle Frame and Sash Welder, Serial Number: 502 (1989) Elumatec, Type ES710LV, Single Head Welder, Serial Number: 7100020430 (2001) Wegoma, Type SK 3P, Vee Cut Saw, Serial Number: 00407 (1980) with Rivers Digital Length and Roller Infeed / Outfeed Tables Rotox, Drainage Router, Serial Number: (1994) Kombimatec, Type 1HDX140, Single Head Crusiform Welder, Serial Number: 6752 (2006) Elumatec, Type KNA-870, Vee Notch Corner Cleaner, Serial Number: 028 (2001) Urban, Type AKS3511/M, Single Head Transom Welder, Serial Number 8223 (1989) Jade Engineering, Little Mac, Internal Corner Cleaner, Serial Number 181 (2004) Haffner, Type GL172, CNC Bead Saw Serial Number: 252 (1994) with Beckhoff, C101, Digital Length Wegoma, Type SD-25EP, Double Head Mitre Saw, Serial Number 28985E (1996) with Off-Station Controls Urban, Type AKS 5910, 2 Head Inline Welder, Serial Number: 59012 (2006) Urban, Type AKS 5910, 2 Head Inline Welder, Serial Number: 59011 (2006) Make Unknown, Refurbished 4 Head Inline Welder, Bed Size Approximately 5600mm Wegoma, Type SL4UNI, 4 head Inline Welder, Serial Number: 0494751 (1994) Wegoma, Type SL4UNI, 4 head Inline Welder, Serial Number: 28757E (1996) Elumatec, Type DS 703 THV, 3 Head Inline Welder, Machine Number: 7030130030 (2001)

300 301

304 305

306 307

317 318
Elumatec, Type VS-704, 4 Head Inline Welder, Serial Number: 7040130024 (2001) Sturtz, Model SE-2AS-CNC, CNC Corner Cleaner, Machine Number: 85096 (2000) Urban, Type SV-420, CNC Corner Cleaner, Serial Number: 42025 (2000) with CNC Controls Kombimatec, Type EV-470, CNC Transom Corner Cleaner, Serial Number: 6733 (2006) Kombimatec, Type EW-479, CNC Transom Corner Cleaner, Serial Number: 6797 (2007) with Touch Screen CNC Controls Stuga, Flowline 3, CNC Profile Sawing and Machining Centre, Serial Number: FL20336 (2003) with 2 Stooger, CNC Control Station: Swarf Extractor; Offcut Conveyor; Bar Optimising and Internal Offcut Lent Storage; Safety Guarding; Monach, Paxar, Thermal Label Printer and Make Unknown Two Bag Extraction System, Together With All Associated Equipment Two Comp Air, BroomWade, Package Screw Air Compressors (Disconnected - May Only Be Suitable For Parts And Spares) Two Various Hydrovane Air Compressors (Disconnected - May Only Be Suitable For Parts And Spares) Pertici, Univer BS 771, Automatic Bead Saw, (1999) (Disconnected - May Only Be Suitable For Parts And Spares) Two Jade Engineering, Type Euromatec, Corner Cleaners, Serial Number: 114, 1030399 (1999) (Disconnected - May Only Be Suitable For Parts And Spares) Wegoma, Type WS211/4, Water Slot Router, Serial Number: 890162 (1989); Wegoma, KA111, Transom Groover, Serial Number 25572E (1991); Jade Engineering, Type 694/695, Mobile Single Bag Dust Extractor and Wegoma, Type GL1427H, Vee Cut Saw, serial Number: 670287 (1987) (Disconnected, May Only Be Suitable For Parts And Spares) Elumatec, Type KS101, Vee Corner Notcher, Serial Number: 1012331322 (2001) (Disconnected - May Only Be Suitable For Parts And Spares) Two Various Urban, Welders (Disconnected - May Be Only Suitable For Parts And Spares) Elumatec, Type AF-223, End Miller, Machine Number: 20138 (1989); Elumatec, Type 101/30, 2 Head Vee Notch Saw, Machine Number: 40159 (1998) and Wegoma, WSA-L200, Welder, and Make Unknown, Router (Dismanteled - May Be Suitable For Parts And Spares Only) Make Unknown, 4 Head Inline Welder (Disconnected - May Be Suitable For Parts And Spares Only) Wegoma, Single Bag Dust Extraction Unit and Make Unknown, 2 Bag Dust Extraction Unit (Disconnected - May Only Be Suitable For Parts And Spares)

(2) Cheques

Cheques will only be accepted on the following basis Supported by a valid cheque guarantee card, up to the stated value on the card If accompanied by a Bankers Letter referring to the sale and worded as follows: We guarantee to honour a cheque presented to Edward Symmons on.[date], up to the value of.[amount], assuming that the cheque is in order, ie correctly worded and signed by.[names of signatories] Note: ID will be required from all signatories If the wording does not satisfy the Cashier or if it is for a significant amount, approval will be sought from the Auctioneer whose word is final
MONEY LAUNDERING REGULATIONS
Services provided by Edward Symmons in relation to the sale of assets fall under the Proceeds of Crime Act 2002. Accordingly we have put in place policies and procedures which are designed to prevent, forestall and identify acts of money laundering. Edward Symmons will not accept transactions in cash which exceed 9,000 under any circumstances and Edward Symmons will take any action necessary to ensure that it does not contravene its obligations under the Money Laundering Regulations 2007. In the event that a purchaser entering into a business relationship with Edward Symmons, knowingly or unwittingly fails to comply with our policy Edward Symmons will have no choice than to treat this as a breach of the regulations. Where necessary ID will be sought by the firm and consider a report to SOCA (Serious Organised Crime Agency)
Should you have any queries on the above, please contact our MBA Accounts Team on +44(0)2380 461643
RADWAY DOOR & WINDOWS LIMITED
From J3 M42 follow the A435 to Redditch, Evesham. After approximately 3.5 miles, bear left and merge onto the A4023 for Bromsgrove, Redditch. At roundabout take the 2nd exit onto Alders Drive. Take second right onto Oxleasow Road.
NOTICE A LL LOTS IN THIS SA LE A R E SUB JEC T TO A B UY ER S PR EM IUM OF 15% PLUS V.A.T A T THE PREVAILING RATE
In bidding you are accepting the terms detailed in our NOTICE TO PURCHASERS and OUR TERMS AND CONDITIONS OF SALE Details of viewing arrangements, acceptance of bids, payment & clearance terms are detailed in our NOTICE TO PURCHASERS

CONDITIONS OF SALE BY ON-LINE AUCTION 1: Conditions These conditions, together with any special conditions or Notices to Purchasers, are the only terms and conditions subject to which Edward Symmons LLP acting as agents for the Vendor will contract with buyers. Bidding for any lot shall be deemed to be an acceptance of these conditions and any conditions in the Notices to Purchasers. If there is any inconsistency between any of these conditions and anything in the Notices to Purchasers, then those in the Notices to Purchasers shall prevail. 2: 2.1 Inspection and Description Buyers have a responsibility to make their own inspection and investigation of the lots at the time(s) and at the premises specified, and to satisfy themselves on all matters affecting the lots, and to inspect and satisfy themselves prior to the sale, as to the condition and description of a lot, its fitness and suitability for purpose. Goods are believed to be correctly described but all goods are sold with all faults, imperfections and errors of description. Neither the Vendor nor the Auctioneers, their servants or agents makes or gives, nor has any person in the employment of the Auctioneers any authority to make or give, any representation or warranty in relation to any lots.
the Buyer and the third party will jointly and severally be liable for all obligations arising from the bid where a third party shall be bound by these conditions by the individual bidding as his agent in the same way as if he were bidding personally. 5: Risk and Title As from the date and time the Buyer is declared, all risks in and relating to the Goods purchased, shall pass to the Buyer and the Buyer is strongly advised to effect insurance for these risks at once. In no circumstances will the Auctioneers or the Vendor be responsible if any Goods or part thereof be lost, stolen, damaged or destroyed after the Buyer is declared. The Vendor shall only sell such title to the Goods as he may have. Neither the Auctioneers nor the Vendor warrants the Vendors good title to any of the Goods and if it is found that the Vendor does not have title or unencumbered title to any of the Goods purported to be sold under these conditions the Buyer expressly agrees that it shall have no right either to rescind the contract or to claim damages or a reduction in the consideration paid or payable under the contract. Title to each of the Goods will not pass until:(a) all debts owed by the Buyer to the Auctioneers (whether partpaid secured or otherwise) are settled, for the avoidance of doubt the debts shall not be settled until (where payment or part payment is made by cheque) all cheque(s) in question have been cleared; and such Goods have been removed from the premises at which the sale is held or where the Goods are being stored in their entirety.

2.2 2.3

3: Limitation of Liability 3.1 Neither the Vendor nor the Auctioneers, their servants or agents shall be liable for any loss or damage suffered by the Buyer arising out of or in connection with any defects or deficiencies in any lots purchased, errors of description in the auction catalogue, any mis-statements as to any matter affecting the lots or the failure of the lots to fulfill the functions for which they were intended 3.2 The Auctioneers and the Vendors total liability for breach of contract or negligence is limited to the Bid Price. 3.3 Neither the Auctioneers nor the Vendor shall be liable for any indirect or consequential loss or damage (whether for loss of profit, loss of business or otherwise) incurred by the Buyer whatsoever. 3.4 Nothing in these conditions excludes or limits the liability of the Auctioneers or Vendor for death or personal injury caused by their negligence or fraudulent misrepresentation. 3.5 Nothing in these conditions shall prejudice the statutory rights of a consumer who shall be bound by these conditions only insofar as they are consistent with such statutory rights. 4: Conduct of Sale The Auctioneers reserve the right in their absolute discretion to refuse admission to the premises and grounds to any person. The conduct of the sale shall be at the Auctioneer's sole discretion and the Auctioneers reserve the right to refuse any bids without giving any reason. If any dispute of whatsoever nature relating to a bid shall arise, such dispute shall be determined by the Auctioneers in their absolute discretion and whose decision shall be final and binding on all parties. Each bidder must register prior to submitting any bids in On-Line sales. Edward Symmons LLP reserves the right to reject any registration at its sole discretion. The Vendor and the Auctioneers reserve the right to fix a reserve price for any lot. No bid may be withdrawn after the close of bidding. The Vendor or the Auctioneers have absolute discretion to withdraw consolidate or divide at any time any lot. The highest bidder for each lot at the close of bidding shall be the Buyer, subject to approval by the Auctioneers and the Vendor. The Sale Price is exclusive of the buyers premium and VAT. The highest bid at the close of bidding subject to approval by the Auctioneers and Vendor also marks a conclusion of a contract of sale between the Vendor and the Buyer. In making a bid for any lots, the Buyer does so as principal. The Buyer will be held personally and solely liable for a bid unless the Auctioneers have previously agreed in writing with the Buyer that that bidder will do so on behalf of an identified third party acceptable to the Auctioneers. In circumstances where the Auctioneers have so agreed,

6: Removal No lot or part thereof can be removed until payment in cash or approved Bankers Draft has been made in full or (where any part of the payment was made by cheque) the cheque has cleared in the Auctioneer's account. No lot shall be removed without the authority of the Auctioneer and unless under the supervision of the Auctioneer's servants or agents. Removal shall take place only up to 5.00 pm and must be completed by 5.00 pm on the day following the sale (and in every case time shall be of the essence) unless the Notice to Purchasers otherwise specify or written authority is obtained from the Auctioneers for clearance after that time. The Buyer has no right to anything not described in the auction catalogue. Delivery of lots sold will be made only to the declared Buyer and no transfer of any lot or part of a lot to any other person will be recognised. Prior to the removal of any lot the Vendor may rescind the contract for the sale of that lot and refund to the Buyer any money paid by the Buyer for the lot should any third party claim title to or possession of any part of the lot. The Buyer will be responsible for removal of lots at his own expense and must provide his own labour, and equipment. The Auctioneers require that in pursuit of safe working practice all equipment used for lifting and transportation should be covered by appropriate insurance and registration documents (in particular but not limited to lifting equipment and fork lift trucks). Such documentation shall be produced to the Auctioneers by the Buyer on request for inspection and if the Buyer fails to produce such documentation the Auctioneers reserve the right to refuse to clear the lot and/or rescind the sale in which event the provisions of condition 8 will apply. Furthermore appropriate personal protective equipment must be worn during these activities and due regard paid to safe material handling practices. 7: Damage to Premises The Buyer shall be responsible for the removal of all goods purchased at his own expense and risk and such removal must be carried out safely and lawfully and in accordance with any conditions of sale of which the Buyer is notified. For the avoidance of doubt removal includes where applicable disconnection from the mains electricity supply and the detachment of any lots which are fixed. All electrical installations must be left in a safe condition during and after the removal and the use of explosives or flame cutting equipment or any other potentially hazardous or inflammatory process shall not be

permissible on the site without the express written consent of the Auctioneers. The Buyer shall be responsible to insure against and to make good any injury or damage to persons or property caused by the Buyer, their carriers, servants or agents detaching, disconnecting or removing any goods purchased by the Buyer. The Buyer shall produce his insurance documentation to the Auctioneers on request and if the Buyer fails to produce such documentation the Auctioneers reserve the right to refuse to clear the lot and/or rescind the sale. The Buyer shall indemnify the Auctioneers for any damage or loss which the Auctioneers may suffer in respect of loss, damage or injury suffered by the Buyers agents or employees or any third party arising from the removal. At its discretion the Auctioneers may require the payment of a deposit to the Auctioneers prior to and/or during the removal which will be refunded on the removal being completed to the Auctioneer's satisfaction. If the Buyer refuses to deposit such monies, the Vendor or the Auctioneers may refuse the Buyer access to the premises for the purposes of removing the lot purchased by them and/or rescind the sale in which event the provisions of condition 8 will apply. The Auctioneers reserve the right to stop the removal of a lot by a Buyer, his agents or employees, if it appears to the Auctioneers or its agents or employees that the removal is being carried out in an unsafe or unsatisfactory way. 8: Default by Buyer Upon failure by the Buyer for whatsoever reason:(i) (ii) (iii) (iv) (v) to pay a deposit in full if required under the Conditions of Sale; or to pay the purchase price in full on the due date; or to provide any documentation required under these conditions; or to remove the goods in a safe or satisfactory way; or to remove any lot from the premises on or before the date specified for removal,
It is expressly brought to the Buyers attention and that of potential buyers, at the time of sale, any item of plant, machinery or equipment contained in the goods may not necessarily comply with the Health and Safety at Work Etc. Act 1974; the Environmental Protection Act 1990; Construction Design and Management Regulations 1994 or any other Act of Parliament or regulations thereunder governing the use of that plant, machinery or equipment in a working environment. Buyers of any such plant, machinery or equipment are hereby required to ensure so far as reasonably practicable that such item will be safe and without risk to health and that the use of any such items at a place of work within the EEC & the United Kingdom does not contravene any such Act of Parliament or regulation applicable to such use. 13: Dangerous Substances It is expressly brought to the attention of Buyers (and potential buyers) that certain types of plant or main service installations could contain blue and white asbestos, dangerous chemicals and hazardous waste which if not handled correctly during their removal from the premises could be in breach of the Health and Safety at Work Etc. Act 1974 Sections 2-9 Control of Substances Hazardous to Health Regulations 1988 (COSHH) or other current legislation regulating the use of such substances in a working environment. The Buyer shall ensure so far as is reasonably practicable that they comply with the Health and Safety at Work Etc. Act 1974, COSHH and other current legislation in connection with the removal, handling and transport of such dangerous substances and or hazardous waste or shall employ a specialist contractor to remove them. The Buyer shall, on request, satisfy the Auctioneers in relation to its removal procedures, and the removal of waste materials must be undertaken by an approved and licensed contractor. The Buyer will indemnify the Vendor, their servants or agents against any loss, damages or expenses suffered by them as a result of the Buyers or a sub-contractors failure to comply with this legislation. 14: Notices Any notices or other communications shall be in writing and, if sent by post, shall be deemed to have been received by the addressee on the second working day after posting or, if the addressee is outside the United Kingdom, on the fifth working day after positing. If any written notice is delivered by hand, it shall be treated as having been received at that time. Any notice sent to the Auctioneers shall be sent to the Auctioneers address as set out in the auction catalogue, or displayed on the auctioneers web site on the notice specific to that sale. Any notice which the Auctioneers send to the Buyer may be sent to the Buyers last address known to the Auctioneer. 15: Third Party Rights Save as expressly provided in these conditions, no term of these conditions shall be enforceable under The Contracts (Rights of Third Parties) Act 1999 by a third party. 16: Governing Law These Conditions and any Conditions contained in the Notices to Purchasers, along with all associated transactions and all connected matters shall be governed and construed in accordance with English Law 17: Severability In the event that any provisions of these conditions shall be held unenforceable for any reason, the remaining conditions shall remain in full force and effect.

The Vendor will be entitled to rescind the contract forthwith without incurring any liabilities to the Buyer and, without prejudice to any claims of the Vendor and/or the Auctioneers against the Buyer arising from breach of contract or otherwise, upon rescission as aforesaid the following provisions apply: (a) all monies deposited in part payment will be forfeited and used to pay the Vendor's and/or Auctioneer's expenses referred to in paragraph (d) below; if the lots have been removed in breach of these conditions, the Vendor and/or the Auctioneers, their servants or agents may enter the premises of the Buyer to recover such lots; lots may be re-sold or otherwise disposed of by the Auctioneers in the manner they feel appropriate at their sole discretion and any deficiency arising upon the resale together with the expenses of it shall be due as a debt from the Buyer in default upon the first sale. The Buyer consents to such a resale on the Auctioneers conditions of business applicable at the time of resale. Neither the Auctioneers nor the Vendor shall be liable to account to the Buyer in the event of a re-sale at a higher price than the price contracted to be paid by the Buyer. The Buyer waives any claim in such a case that he may have title to the lot and agreed that any re-sale price shall be deemed commercially reasonable; the Buyer will be responsible from the specified time for final removal for all losses and expense incurred by the Vendor and/or the Auctioneers including storage, security and removal expenses, the costs of re-selling or disposing of lots and Auctioneer's commission.
9: Auctioneer as Agent The Auctioneers act only as Agents for and on behalf of the Vendor and shall not be held responsible for any action or default on the part of either the Vendor, bidders or the Buyer. Any concluded contract of sale is made directly between the Vendor and the Buyer. 10: Accident or Damage Neither the Auctioneers nor the Vendor will accept any responsibility for any accident, (except for that arising out of its negligence, or the negligence of its agents or employees, resulting in death or personal injury) howsoever caused to any person which may occur whilst on the Auctioneer's premises, the Vendor's premises or such other premises used to hold the auction or to store the lots before during or after the sale and any person entering the premises does so at his own risk and is deemed to have notice of the condition of the premises and their contents. 11: The Consumer Protection Act 1987 No lots are sold as new. 12: Health & Safety At Work