Here you can find all about LG LAC5800R like manual and other informations. For example: .
LG LAC5800R manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a LG LAC5800R please write about it to help other people. [ Report abuse or wrong photo | Share your LG LAC5800R photo ]
LG LAC5800R Car Audio, size: 1.7 MB
LG LAC5800R car radio
User reviews and opinions
No opinions have been provided. Be the first and add a new opinion/review.
MODEL : LAC5800R
Table of Contents
6 Table of Contents Safety Note Front Panel / Remote Control (optional) About Detachable Control Panel
Attaching the control panel Detaching the control panel
Connecting USB device
Moving to another drive
Connecting an Auxiliary Equipment Listening a CD
Pause or restart a CD Search for a section within a track/ file Skip to another track / file Intro scan Repeat Shuffle MP3/WMA Track -10 / +10 MP3/WMA Folder UP/DOWN See information about your music
Basic installation Removing the existing receiver unit ISO-DIN installation Battery installation
Connection Basic operation
Mute Changing the general settings Using the EQ Adjusting the sound level XDSS+ Checking the clock
Troubleshooting General setting information Specifications
Listening RDS broadcasting
RDS broadcasting information.
This product is manufactured to comply with Directive 2006/28/EEC(ANNEX I , 3.2.9), 72/245/EEC, and 2006/95/EC. European representative : LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31-036-547-8940)
Listening to the radio
Auto search memory Storing and recalling broadcast frequencies To scan the preset stations To tune in the preset stations
CAR CD/MP3/WMA Receiver
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT COVER(OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. Always operate the vehicle in a safe manner. Do not become distracted by the vehicle while driving, and always be fully aware of all driving condition. Do not change settings, or any functions. Pull over in a safe and legal manner before attempting such operations. Do not use for many hours at extremely low or high temperature. (-10~60C) To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing water, rain, or moisture. The temperature of units outside can be extremely high, please use the unit after proper installation in your vehicle.
CAUTION : This product uses a Laser System. To ensure proper use of this product, please read this owners manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Performing controls, adjustments, or carrying out procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product.
Caution When being connected in a wrong way, the unit displays as follows. 1. Antenna port short : ANTENNA ON PORT SHORT CIRCUIT CHECK 2. Remote port short : REMOTE ON PORT SHORT CIRCUIT CHECK 3. Antenna port and Remote port short : ANTENNA REMOTE ON PORT SHORT CIRCUIT CHECK After connecting it again, restart the unit. You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live File System, you cannot use it on LG players. (Mastered/Live File System : Disc format system for Windows Vista)
This unit cannot play 8cm disc (use 12cm disc only).
Front Panel / Remote Control(optional)
SOURCE [SRC] Skip / Search / Seek / Tune -?b / B?+ U Auto Store [U/AS] u Preset Scan [u/PS] u MP3/WMA Track +10/-10 U/u u Folder Up/Down U/u Volume [MUTE] Power [PWR] Remote Sensor (Optional) [MENU] Equalizer [EQ] Extreme Dynamic Sound System [XDSS+] Traffic Announcement [TA] Programme Type [PTY] Display [DISP]
Eject Z Release USB slot AUX in Preset Station [1~6] Shuffle [SHF] Repeat [RPT] Intro Scan [INT] Play/Pause B/X [BAND] [DRIVE] 20 Select [SEL]
Power [POWER] / Mute Select [MENU/SEL] Source [SRC] Play / Pause B/X Intro Scan [INT] Shuffle [SHF] MP3/WMA Track +10 Folder Up U CD Skip / Search Seek / Tune ?m m
[BAND] DRIVE [DRV] Volume Up / Down Number [#] Repeat [RPT] Number [0 -9] CD Skip / Search Seek / Tune M M? Display [DISP.] MP3/WMA Track -10 Folder Down u
About Detachable Control Panel
Attaching the control panel
Align the left side of the panel with the stopper. Push the right side or panel into the unit until it clicks.
Detaching the control panel
Press the (RELEASE) to open the control panel. Hold the right part of the control panel. Pull out the control panel. Place the control panel in the supplied protective case.
Caution The control buttons may not work properly if the control panel is not attached properly. If this occurs, gently press the display. Do not leave the control panel in any area exposed to high temperatures or direct sunlight. Do not drop the control panel or otherwise subject it to strong impact. Do not allow such volatile agents as benzine, thinner, or insecticides to come into contact with the surface of the control panel.
Control panel Protective Case
Periodically wipe the contacts on the back of the control panel with a cotton swap moistened with alcohol. For safety, turn off the ignition before cleaning, and remove the key from the ignition switch.
Bend the claws according to the thickness of the dashboard
Before installing, make sure that the ignition-switch is set to OFF and remove the terminal of the car battery to avoid short-circuiting. Remove the existing receiver unit. Make the necessary connections. Install the installation sleeve. Install the unit into the installation sleeve.
Slide the unit into the ISO-DIN frame. Fit screws removed from the old unit. Slide the unit and frame into the dash opening. Install the dash panel or adapter plate. Install the trim ring to the unit. Install the control panel to the unit.
Removing the existing receiver unit
If there is already an installation sleeve for the receiver unit in the dashboard, it must be removed. Remove the rear support from the unit. Remove the control panel and trim ring from the unit. Insert the lever A into the hole on one side of the unit. Perform the same operation on the other side and pull the unit out from the mounting sleeve. 2 3
Pull out the battery holder with a sharp product like a ball point pen. Put the battery with and correctly on the battery holder. Push the battery holder back into its original position.
Note Use only one CR2025 (3V) lithium battery. Remove the battery if the remote control is not used for a long period of time. Do not leave the product in a hot or humid place. Do not handle the battery with metallic tools. Do not store the battery with metallic materials.
Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
Phone Mute(Orange) Remote On(Blue/White) Amplifier (Optional) Amplifier (Optional) To Audio in
Front Left Rear Left Front Right Rear Right To Audio out
A5 Power Antenna(Blue) A6 Dimmer(Pink) A7 To Ignition(Red) A4 To Battery(+)(Yellow) A8 Ground(-)(Black)
Dimmer Switch Ignition Switch
B 1 B 2 B 3
B 4 B 5 B 6 B 7 B 8
B B B B B B B B
Violet : Rear Right + Violet/ Black Stripe : Rear Right Gray : Front Right + Gray / Black Stripe : Front Right White : Front Left + White/Black Stripe : Front Left Green : Rear Left + Green/ Black Stripe : Rear Left
A1, A2, A3 : Not connected
ON PLAYER 1. Turn the unit on. 2. Select a source. 3. Adjust the volume. PWR/MUTE SRC Rotate PWR ON REMOTE POWER SRC VOLUME XDSS+ (Extreme Dynamic Sound System)
Press and hold EQ/XDSS+. (XDSS+ : Improves the treble, bass sound.) To cancel it, press and hold again. When EQ and XDSS+ is set to Off, you can adjust the sound level (BAS, MID, TRB) settings.
Checking the clock
Basic operation - more you can do
Press MUTE/PWR (POWER cancel it, press again. on the remote control) to cut the sound. To
You can see the clock pressing DISP (DISP. on the remote control).
ON PLAYER 1. Select a source to tuner. 2. Select a band to FM. 3. Select a programme types. 4. Select a station in PTY type. RDS broadcasting information.
Press and hold the PTY repeatedly for selecting each mode. Music group t Speech Group t Search off NO. MUSIC GROUP 1. 2. 3. 4. 5. 6. POP M, ROCK M EASY M, LIGHT M. CLASSICS, OTHER M JAZZ, COUNTRY NATION M, OLDIES FOLK M NO. SPEECH GROUP 1. NEWS, AFFAIRS, INFO 2. SPORT, EDUCATE, DRAMA 3. CULTURE, SCIENCE, VARIED 4. WEATHER, FINANCE, CHILDREN 5. SOCIAL, RELIGION, PHONE IN 6. TRAVEL, LEISURE, DOCUMENT
Changing the general settings
1 Press MENU (press and hold SEL/MENU on remote control) so that one of menu items appears. 2 Press MENU (SEL/MENU on remote control) and rotate PWR. (Press VOLUME on the remote control.) to select one of the settings specified belows. - For more details about setting information, refer to page 12. 3 Press and hold MENU (SEL/MENU on remote control) to finish the setting.
SRC BAND Press and hold TA/PTY 1-6
Using the EQ
EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully. Press EQ/XDSS+ repeatedly. The indicator lights up in the following order. Pop t Classic t Rock t Jazz t Vocal t Salsa t Samba t User1 t User2 t Off Note When XDSS+ is set to Off, you can adjust the EQ settings.
Adjusting the sound level
Press SEL (SEL/MENU on the remote control) repeatedly to select the mode you want to adjust from volume, balance and fader. To adjust sound quality, rotate PWR. Note
8 CAR CD/MP3/WMA Receiver
ON PLAYER 1. Select a source to tuner. 2. Select a band. 3. Auto seek. Manual seek. SRC BAND -?b / B?+ Press and hold -?b / B?+ ON REMOTE SRC 3 / BAND ?mm/MM? Press and hold ?mm/MM?
ON PLAYER 1. Open the USB cover. Rotate PWR 2. Connect the USB device. 3. Adjust the volume. Moving to another drive
ON REMOTE VOLUME
Listening to the radio - more you can do
Auto search memory
Press U/AS. The six strongest broadcast frequencies will be stored under preset button 1-6 in the order of their signal strength.To cancel, press U/AS.
Storing and recalling broadcast frequencies
1 Press BAND to select desired band you want to store. 2 Select the desired frequency and press one of preset buttons 1-6 and hold until the beep sound. 3 Repeat steps 1-2 to preset other stations.The next time, you press the same preset button, the radio station frequency is recalled from the memory.
When connecting this unit to multi reader, press BAND/DRIVE (BAND/DRV on remote control) to go to the next drive. Each time you press the button, the driver modes changes. Note If the USB device is already connected, press SRC (SRC on remote control.) to select a source to USB.
To scan the preset stations
Press u/PS. Each preset station appears. To cancel, press u/PS.
Connecting an Auxiliary Equipment
To tune in the preset stations
Press BAND to select the desired band and press the desired preset button 1-6 (preset button 1-6 on the remote control). Note When a station is stored on the preset numbers on which another station of the same band has already been preset, the previously preset station is automatically erased.
MP3 Player, etc ON PLAYER 1. Select a source to AUX. 2. Play the connected Auxiliary Equipment. 3. Adjust the volume. SRC Rotate PWR
Line out ON REMOTE SRC VOLUME
Listening a CD
ON PLAYER 1. Insert a CD. 2. Adjust the volume. Rotate PWR ON REMOTE VOLUME
Note During random playback, if you press -?b , you wont go back to the previous track.
MP3/WMA Track -10 / +10
(If there is no folder or one folder.) During playback press u/PS to go back 10 tracks, and press U/AS to go forward 10 tracks.
Listening a CD - more you can do
Pause or restart a CD
Press B on the player (B/ on the remote control) during playback. Press this B button again to resume play.
MP3/WMA Folder UP/DOWN
(If there are more than two folders.) During playback, press u/PS to go back to the previous folder, and press U/AS to go forward to the next folder.
See information about your music
MP3/WMA files often come with tags. The tag gives the Title, Artist or Album. Press DISP repeatedly during MP3/WMA/CD TEXT file playback. If there is no information, NO TEXT will be shown in the display window. Note : The icon is displayed during MP3/WMA playback. MP3/WMA Disc compatibility with this unit is limited as follows: 1. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA) 2. Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA) 3. CD-R/CD-RW file system should be ISO 9660 4. If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example Direct-CD etc., it will not be possible to playback MP3/WMA files. We recommend that you use Easy-CD Creator which creates an ISO9660 file system. 5. WMA decoder is supported until Class 2A. Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner.
Search for a section within a track / file
Press and hold -?b / B?+ on the player (.bb/BB> on remote control) for about 1 second during playback and then release at the point you want.
Skip to another track / file
Press -?b / B?+ on the player (.bb/BB> on remote control.). To skip to previous track, press briefly -?b within 3 seconds of playing time. Press [#] and
a number you want to move on remote control to move the files/track. Intro scan
Press or press and hold INT on the player (INT on remote control). Each files in the current selected folder ( INT) or the first 10 seconds of each tracks/files (INT) on the disc are played. To cancel it, press the button again.
Press or press and hold RPT on the player (RPT on the remote control). The current selected tracks/files (1 RPT) or folder ( RPT) on the disc is played repeatedly. To cancel it, press the button again.
Press or press and hold SHF on the player (SHF on the remote control). Each files in the current selected folder ( SHF) or all of the tracks/files (SHF) on the disc is played randomly. Press SHF again to cancel it.
Symptom Cause Correction
Power doesnt turn on / The unit doesnt operate.
Leads and connectors are not properly. The fuse is blown.
Noise and other factors are causing the builtin microprocessor to operate incorrectly. No sound is heard / The vol- Cables are not connected correctly. ume level will not rise. Theres audio skipping. This unit is not firmly secured. The playback is not possi The disc is dirty. ble. The loaded disc is of a type this unit cannot play. Battery power is low. The unit does not operate correctly even when the appropriate remote control buttons are pressed.
Confirm once more that all connections are correct. Rectify the problem that caused the fuse to blow, and then replace it. Be very sure to install the correct fuse with the same rate. Turn the unit off and then on. Connect the cables correctly. Secure this unit firmly. Clean disc. Check what type the disc. Load new battery.
General setting information
AF(Alternative frequency) ON / OFF When the reception quality drops, the tuner automatically changes to another station in the network, broadcasting a better reception quality, using the PI and AF codes. REG (Region) ON / OFF REG ON : The unit switches to another station, within the same network, broadcasting the same program when the receiving signals from the current station become weak. REG OFF : The unit switches to another station, within the same network when the receiving signals from the current station become weak. (This mode, the program may differ from the one currently received.) TA(Traffic Announcement) ALARM / SEEK TA ALARM : When a newly tuned station has no TP information for 5 seconds, a double beep sound is output. TA SEEK : When the newly tuned station does not receive TP information for 5 seconds, the receiver retunes to the next station which has the same PI as the last station, but has the TP information. PI (Programme Identification) SOUND / MUTE PI SOUND : If the sound of a station with different PI is heard intermittently, the receiver mutes the sound after 1 second. PI MUTE : If the sound of a station with different PI is heard intermittently, the receiver mutes the sound right now. AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. AUX (Auxiliary) 00dB / +6dB You can adjust the volume level of each source to prevent radical changes in volume when switching between sources. You can set to 0 dB or +6 dB. You may be surprised at a loud sound when you change the source from the external component to another source. DEMO OFF/ ON You can change the initial indication on the display to information name (function name, EQ name, etc.) while listen to a source. LED RED / GRN You can change the color of button. RED(red) <-> GRN(green) BEEP 2ND / ALL BEEP 2ND : The beep is generated when a key is long pressed. (1 sec) BEEP ALL : The beep is generated when any key is pressed.
General Output Power Power Source Speaker impedance Ground System Dimensions (W x H x D) Net Weight Tuner FM Frequency Range S/N Ratio Distortion Usable Sensitivity AM (MW) Frequency Range S/N Ratio Distortion Usable Sensitivity CD Frequency Response S/N Ratio Distortion Channel Separation (1kHz) AUX Frequency Response S/N Ratio Distortion Channel Separation (1kHz) Max Input Level (1kHz) USB Version 50W x 4CH (Max.) DC 12V 4 Negative 180 x 50 x 176 mm (Without Control Panel) 1.3 kg
87.5-107.9, 87.5-108, 65-74 or 87.5-108 MHz 55 dB 0.7% 12 dBV 520-1720 or 522-1620 kHz 50 dB 1.0% 28 dBV 20 Hz-20 kHz 80 dB 0.12% 55 dB 20 Hz-20 kHz 80 dB 0.12 % 45 dB 1.2V (35K) USB 1.1
Designs and specifications are subject to change without notice.
P/N : MFL41655326
12 CAR CD/MP3/WMA Receiver
VGN-NW MIO 336 Deluxe EOS 5 DD505 GT-E1390 V2 0 42FD9944 01S KDL-40EX508 Gt Nema I Mechwarrior 4 Hnwf 6167 FZ6-S-2007 KV-29FQ85E FA523 Federation DSM300 SS-RXD8S TX-23LXD50 HDR-FX7E HQ6889 Bizhub C220 Computer ZCG5000S CF-21D30 Dista T500 Laserjet 5 MM-DT8 8020-8031-AM-00 NP-R40 Plus MX2500 01 Superjet-2008 General 1300LM WHR-HP-g54 DSP-AX1200 BM35 PMR PC E740 Pacific 16 HD CD-writer 8200 A7S8x-MX Server EW1067F 4FAC-485 Ericsson Z250 XR-Q150 VB-99 VSX-D511 Dynax 7 MRO-DT5 DTI-520 RX-V293 CQ-RX300N F5D4072ED WTH CD Garmin A50 Highlander B1245AV VS4121BLK CDP-CX270 Slide R-7A53 Clipon CSM3PL VGN-FZ11M CLX-8380ND XAA HT-DV40H DVD-HR777 Sagem D60C 165 KF AB9 PRO Berlin DEQ224 96ST-A Edition M1877N AX30G ZS-M30 KDC-135 Series DDP-2 VC-405N PB6240 Orelia S Xterra-2006 MJ-D508 0 5 Quad 22 Sigma SD10 VGN-CS21z Q Deluxe 900 Innov-IS 50 PPC6700 50FD9955-17N DC S40 MDR-NC40 MFC-9660 P2770H
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101